Document of Settings of Central Administration
Hello out there,
I have googled a while to find a way to document the configuration of the "Central Administration". But I couldn't find any result which fits to my requirement. Maybe somebody in this community can give me an hint how to realize it in
a easy way.
Please note I am not an educated SharePoint Admin. Just someone who want to orgaize smooth Operations of my SharePoint Service. :))))
My goal:
I want to have an Overview of all settings and options which are set within the "Central Administration". I want to use it as a kind of baseline (snapshot). So I can reference at anytime what configuration I had for "Central Administrtion"
at a certain time.
Hi,
The SharePoint Central Administration page is defined by system, there is an overview for all settings within Central Adminsitration:
When you click the left quick launch, the right panel will show the associated content. I think it looks good, why not use the default view?
Anyway, if you want to create a custom overview for Central Administration, per my knowledge, your need to create a custom page, then based on your requirement to customize the page.
Thanks,
Wendy
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]
Similar Messages
-
Error while checking in and storing: C:\Documents and Settings\Administr
Dear
Whille saving then document in dms , i am getting this error.....
Error message is : "Error while checking in and storing: C:\Documents and Settings\Administrator\My Documen...."
Message Number is 26253
R KarthikeyanHi all,
Similar kind of issue occurred in one of our webdynpro applications of SAP NetWeaver Portal-
The error message "Error while checking in and storing" was returned by the BAPI while trying to replace documents in the DMS Server via portal.
But the documents were getting stored in the back end by the use of standard T-Codes.
Later it was found that ABAP tables COMPONENTS & COMPONENT_DATA are inconsistent by looking into the HTTP trace file.
The HTTP patch "http.c#21" was being used in our server.
SAP suggested the below mentioned steps-
-->Download the most recent SAPHTTP version & install it.
-->Then delete the RFC connections SAPHTTP & SAPHTTPA through T-Code SM59
-->Regenerate them again with report RSHTTP05
They were carried out in our ECC server & the issue was resolved.
Please try them out if applicable in your case & let us know.
Thanks & Regards,
Shreyashri Kar -
Hello
i Follow
this Article to Config FBA , BUT after Step 3 , My Central Administration shows an Error :
A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server
is configured to allow remote connections. (provider: SQL Network Interfaces, error: 26 – Error Locating Server/Instance Specified)
Correlation ID: 89651359-9c57-4241-8254-eb3be052c4f0
Now , i cannot access to my Central Admin Setting , but my site Collections works well....
i Rollback all setting but no Effect !!!!!
i execute iisreset but nothing !!!!
what should i do?
please help me.. Thanks in Advanced
When i was checking EventViewer , i saw an Event log :
The Forefront Identity Manager Service cannot connect to the SQL Database Server. The SQL Server could not be contacted. The connection failure may be due to a network failure, firewall configuration error, or other connection issue. Additionally,
the SQL Server connection information could be configured incorrectly. Verify that the SQL Server is reachable from the Forefront Identity Manager Service computer. Ensure that SQL Server is running, that the network connection is active, and that the firewall
is configured properly. Last, verify the connection information has been configured properly. This configuration is stored in the Windows Registry.
Is there any relation between this message And my Problem!!!???hi Mr Thuan
Soldier
i checked
some of your Solution like SQLService (Was OK) , Allow Remote connection (was OK & has check mark), Restart SqlService (Done Successfully), Network Card Driver (my Connection is OK) before , but didnot check SQL
Service account & i will do Soon,
but
i did not any changes on Firewall or IP ... i change IIS setting (through
this
Article ) ,
Do these settings have any effect on IP or firewall ?
thanks
mohamamd
MBS - social.technet.microsoft.com Forum -
Hi Everyone,
I think I've shot myself in the foot by not properly following set up instructions.
I have a two-fold problem. Firstly, my Sharepoint Central Administration V4 site is showing
Service Not Available. This seems to be related to the credentials the
Central Administration V4 Application Pool - hitting Test Settings within
IIS Manager for the site shows an Authentication and Authorization error for the credentials due to a bad password.
My reading indicates that I should run something to the effect of:
%STSADM -o updatefarmcredentials -userlogin DOMAIN\username -password <new password as set via AD>
This runs into the following Error message
Error deploying administration application pool credentials. Another deployment may be active. An object of the type Microsoft.SharePoint.Administration.SPAdminAppPoolCredentialDeploymentJobDefinition named "job-admin-apppool-change" already exists
under the parent Microsoft.SharePoint.Administration.SPTimerService named "SPTimerV4". Rename your object or delete the existing object.
I've tried searching out a solution but as yet have been unable to find a mechanism to resolve this error. I have had a look through http://social.technet.microsoft.com/forums/en-US/sharepointadmin/thread/b7c17dac-1cd1-4f75-a031-e28e4fbfd2f7 but
it doesn't seem to relate to the same problems - as far as I know the account from which the command is being run is a farm administrator and the problem seems to be the existing job rather than permissions errors.
Your help will be much appreciated.
StuartHi Stuart Weaver,
Firstly, please check if the SharePoint 2010 timer service is running. If not, please start it manually, then check the effect. In addition to this, you can try to
run SharePoint configuration wizard, then check the effect.
Note: when you start the SharePoint 2010 timer service, make sure you input the latest password. The steps are as follows:
Open services.msc, locate the SharePoint 2010 timer service, double click it, then click log on tab, input the updated password, then click apply.
Hope this helps.
Rock Wang
Regards, Rock Wang Microsoft Online Community Support -
I cannot uninstall itunes from my computer PC. I cannot update itunes on my computer. I get this message." C:\Documents and Settings\Sally-Anne\Local Settings\Application Data\Apple\Apple Software Update\'iTunes.msi' is not a valid installation package Try to find the installation package itunes.msi in a folder from which you installiTunes."
I have tried a serach for the file itunes.msi and nothing comes up.
Help anyone/
thanksI get this message." C:\Documents and Settings\Sally-Anne\Local Settings\Application Data\Apple\Apple Software Update\'iTunes.msi' is not a valid installation package Try to find the installation package itunes.msi in a folder from which you installiTunes."
(1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
(2) Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
(3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
(4) In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
(5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time? -
I am really angry that I get this message every time I try to update Itunes.
“The File ‘C:/documents and settings\DEAN\Local Settings\Application Data\Apple\Apple Software Update\itunes.msi’ is not a valid installation package for the product itunes. Try to find the installation package ‘itunes.msi’ in a folder from which you can install itunes.
What kind of gobbledegook is that? Are you or Microsoft crazy. Us computer users need simpler instructions. Or you need to write your programs so that they work.
Signed,
Frustrated Apple User
Dean Weaver“The File ‘C:/documents and settings\DEAN\Local Settings\Application Data\Apple\Apple Software Update\itunes.msi’ is not a valid installation package for the product itunes. Try to find the installation package ‘itunes.msi’ in a folder from which you can install itunes.
(1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
(2) Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
(3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
(4) In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
(5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time? -
Hello Community
I reinstalled Sharepoint 2010 and SQL Server 2008R Evalution 64bit edition
on a member server running Windows 2008 on Windows Server Enterprise Service Pack 2.
Then I click the "Sharepoint 2010 Central Administration"
The first error I got was something to the effect that:
"The IIS Admin Service" service failed to start because a privilege that the service
requires does not exist in the service account configuration run Local Security Settings
MMC."
So I changed all of the service accounts to run under the domain admin account
except IIS Admin because it would only work under either the Local Account or Network
Service so I ran it under Network Service.
The error message I got after that was similar so I added "Create Global Policy"
to the group that the domain administrator account and services is in.
After that I didn't get the error message instead in the address bar I
saw http:\\<machine name>:port number\
But the page below was blank.
I went to Administrative Tools and discovered I have two IIS items:
#1-Internet Information Services (IIS) 6.0 Manager
#2-Internet Information Services (IIS) Manager
#1 is blank: Internet Information Services (IIS) 6.0 Manager
#2 is "IIS 7": Internet Information Services (IIS) Manager
so I double clicked Sharepoint Central Administration v4 and clicked the Security Tab
and added the group with the domain admin account and gave it full control. I also
enabled the following:
Anonymous authentication
AsP.Net Impersonation
Basic authentication
Digest authentication
Forms authentication
Windows authentication
Then I click the "Sharepoint 2010 Central Administration" again and
then I saw http:\\<machine name>:port number\login.aspx?ReturnUrl=%2f in the address bar and
on the page I saw HTTP 404 Not Found.
I think Sharepoint 2010 uses the 14 hive but since I just installed it I don't know what pages
should appear so I am at a lost at this point.
What can I do to make the Central Administration page appear?
Thank you
ShabeautHello Daniel
Okay, actually I have tried to do this perfectly but after
failing initially I have probably been trying anything that came
to my mind. So let me explain my initial effort:
I used a domain admin account and logged on locally with that account to
member server to install Sharepoint 2010. Then like you say, I ran the
product configuration wizard to create the farm and Central Administration
site. A Central Administration site was created that I can see in IIS7.
I don't remember clicking "Basic Settings" or "Test Setting" but I do
remember clicking "Authentication" and I think I saw 5 or 6 types of authentication
but only 2 were enabled so I enable the other 3 or 4 and think they were:
Anonymous authentication
AsP.Net Impersonation
Basic authentication
Digest authentication
Forms authentication
Windows authentication
After all of this when I clicked "Central Administration" from
the "Start Menu" I would get prompted 3 times for a password and then just get
<machine name:port number> in the address bar with a blank screen.
After repeating all of these steps over and over again I decided to just
install WSS 3.0 and upgrade that working WSS 3.0 into Sharepoint 2010. But the
problem is I don't know how to perform that type of upgrade.
But now I want to answer your question because you seem to know where I went
wrong so I am going to reinstall Sharepoint 2010 up to the point where I can answer
your question of:
"If you select the web site and from the actions pain choose Basic Settings, then click Test settings, what is the result?"
and
"What authentication is enabled if you open Authentication under IIS in the central pane?"
My only questions are what is supposed to be the results after choosing
"Basic Settings" and "Test Setting" and which of the Authentications should be
enabled and after I set them to what you say, should I then get the Central
Administration page when I click "Central Administration" from the start menu?
Thank you
Shabeaut -
Can't access Foundation 2010 Central Administration
Hi all
I have a strange issue I can't find the answer to. When I access CA, I get the top menu but nothing else. It shows only 1 item in the vertical navigation bar on the left which is Central Administration and the right side shows Resources with a +
sign to add new items. The rest of the screen, specially the middle, is empty. I migrated from 3.0 to 2010 SP2. Everything else seems to load ok, except for CA. I checked the authentication method and Windows Auth is enabled, the rest are disabled.
Any ideas?
PDHi,
Check the option remember the credentials when you log in as another user. Also add SharePoint sites to trust sites or internal sites in your IE settings. See more about prompting credentials：
http://livinghitech.tumblr.com/post/64349539618/sharepoint-2010-prompt-windows-credential
Did you find related error message in ULS log?
Regards,
Rebecca Tu
TechNet Community Support -
Central Administration links point to wrong server
I have 4 machines in my farm. I used Central Administration - Server - Services on Server to change the location where the Central Administration service runs to a different machine. Now, even though the Central Admin website is running on the new box, the
links in the Health list all point to the old CA server. I can manually open up each list item and ask it to 'Reanalyze' but, once it is done, the links still point to the old server.
What am I missing? Is there a Timer job or Workflow that is supposed to change something. (I am surprised this is using absolute links. Shouldn't SP be putting relative links onto the list?)Thanks for your reply but unless you have actually done this and seen that the health reports suddenly have a working URL for each of multiple machines then I'm not sure PSConfig is the answer. I was able to turn off the CA service and unprovision one of
the instances with PowerShell. So, the site is working but just not the health links.
This looks like a bug to me. Even if I go through the PSConfig process and add CA to a new server, now how will it know which URL to put into the Health list items? I just really don't want to run PSConfig on a production server unless I really, really have
to. It does more than I want it to.
Can anyone else confirm whether the Health links are broken on some CA machines and not others? -
Hi All,
I'm getting the below error in My SHarepoint 2013 search Administration page.
Crawler background activity - The search application 'Search Service Application 1' on server "" is not provisioned. Confirm that the Microsoft SharePoint Foundation Timer service and Central Administration service are running
on the server.
and when i click on Crawl Log and content source
it throws the below error
The search service is currently offline. Visit the Services on Server page in SharePoint Central Administration to verify whether
the service is enabled. This might also be because an indexer move is in progress
When i check the search status
Get-SPEnterpriseSearchServiceInstance, it shows all the components are online.
As of now search service application is online and search is working.But not sure why it throws the above error.
I have restarted timer service,search service in services.msc and cleared the sharepoint cache as well.
But no luck,This is happening in my prodcution environment.
Any help will be greatly appreciated.
There are the logs i have found
05/23/2014 13:03:22.71 w3wp.exe (0x46E70) 0x4CBA4 SharePoint Foundation Logging Correlation Data xmnv Medium Name=Request (GET:http://dca-app-617:90/_admin/search/listcontentsources.aspx?appid=e830c1b3%2Dc3e4%2D4097%2D85fd%2Daa5248346d2e) d4c6939c-b10d-4000-6d95-14caeefe67df
05/23/2014 13:03:22.71 w3wp.exe (0x46E70) 0x4CBA4 SharePoint Foundation Authentication Authorization agb9s Medium Non-OAuth request. IsAuthenticated=True, UserIdentityName=, ClaimsCount=0 d4c6939c-b10d-4000-6d95-14caeefe67df
05/23/2014 13:03:22.73 w3wp.exe (0x46E70) 0x4CBA4 SharePoint Foundation Logging Correlation Data xmnv Medium Site=/ d4c6939c-b10d-4000-6d95-14caeefe67df
05/23/2014 13:03:22.79 w3wp.exe (0x46E70) 0x4CBA4 SharePoint Server Search Administration djs2 High [Forced due to logging gap, cached @ 05/23/2014 13:03:22.76, Original Level: VerboseEx] {0} d4c6939c-b10d-4000-6d95-14caeefe67df
05/23/2014 13:03:22.79 w3wp.exe (0x46E70) 0x4CBA4 SharePoint Server Database 8acb High [Forced due to logging gap, Original Level: VerboseEx] Reverting to process identity d4c6939c-b10d-4000-6d95-14caeefe67df
05/23/2014 13:03:22.80 w3wp.exe (0x46E70) 0x4CBA4 SharePoint Server Search Administration djj1 High Unable to find application 'b9c8106c-c7ed-4eb3-96c9-ae1881ffb695' d4c6939c-b10d-4000-6d95-14caeefe67df
05/23/2014 13:03:22.82 w3wp.exe (0x46E70) 0x4CBA4 SharePoint Server Search Administration djj1 High Unable to find application 'b9c8106c-c7ed-4eb3-96c9-ae1881ffb695' d4c6939c-b10d-4000-6d95-14caeefe67df
05/23/2014 13:03:22.82 w3wp.exe (0x46E70) 0x4CBA4 SharePoint Foundation General 8nca Medium Application error when access /_admin/search/listcontentsources.aspx, Error=The search service is currently offline. Visit the Services
on Server page in SharePoint Central Administration to verify whether the service is enabled. This might also be because an indexer move is in progress. at Microsoft.Office.Server.Search.Internal.UI.SearchCentralAdminPageBase.ErrorHandler(Object
sender, EventArgs e) at Microsoft.Office.Server.Search.Internal.UI.SearchCentralAdminPageBase.OnError(EventArgs e) at System.Web.UI.Page.HandleError(Exception e) at System.Web.UI.Page.ProcessRequestMain(Boolean
includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) at System.Web.UI.Page.ProcessRequest(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) at System.Web.UI.Page.ProcessRequest()
at System.Web.UI.Page.ProcessRequest(HttpContext context) at System.Web.HttpApplication.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute() at System.Web.HttpApplication.ExecuteStep(IExecutionStep
step, Boolean& completedSynchronously) d4c6939c-b10d-4000-6d95-14caeefe67df
05/23/2014 13:03:22.82 w3wp.exe (0x46E70) 0x4CBA4 SharePoint Foundation Runtime tkau Unexpected Microsoft.SharePoint.SPException: The search service is currently offline. Visit the Services on Server page in SharePoint Central
Administration to verify whether the service is enabled. This might also be because an indexer move is in progress. at Microsoft.Office.Server.Search.Internal.UI.SearchCentralAdminPageBase.ErrorHandler(Object sender, EventArgs e)
at Microsoft.Office.Server.Search.Internal.UI.SearchCentralAdminPageBase.OnError(EventArgs e) at System.Web.UI.Page.HandleError(Exception e) at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint,
Boolean includeStagesAfterAsyncPoint) at System.Web.UI.Page.ProcessRequest(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) at System.Web.UI.Page.ProcessRequest()
at System.Web.UI.Page.ProcessRequest(HttpContext context) at System.Web.HttpApplication.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute() at System.Web.HttpApplication.ExecuteStep(IExecutionStep
step, Boolean& completedSynchronously) d4c6939c-b10d-4000-6d95-14caeefe67df
05/23/2014 13:03:22.82 w3wp.exe (0x46E70) 0x4CBA4 SharePoint Foundation General ajlz0 High Getting Error Message for Exception Microsoft.SharePoint.SPException: The search service is currently offline. Visit the Services on
Server page in SharePoint Central Administration to verify whether the service is enabled. This might also be because an indexer move is in progress. at Microsoft.Office.Server.Search.Internal.UI.SearchCentralAdminPageBase.ErrorHandler(Object
sender, EventArgs e) at Microsoft.Office.Server.Search.Internal.UI.SearchCentralAdminPageBase.OnError(EventArgs e) at System.Web.UI.Page.HandleError(Exception e) at System.Web.UI.Page.ProcessRequestMain(Boolean
includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) at System.Web.UI.Page.ProcessRequest(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) at System.Web.UI.Page.ProcessRequest()
at System.Web.UI.Page.ProcessRequest(HttpContext context) at System.Web.HttpApplication.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute() at System.Web.HttpApplication.ExecuteStep(IExecutionStep
step, Boolean& completedSynchronously) d4c6939c-b10d-4000-6d95-14caeefe67df
05/23/2014 13:03:22.82 w3wp.exe (0x46E70) 0x4CBA4 SharePoint Foundation General aat87 Monitorable d4c6939c-b10d-4000-6d95-14caeefe67df
05/23/2014 13:03:22.82 w3wp.exe (0x46E70) 0x4CBA4 SharePoint Foundation DistributedCache ah24q Unexpected SPDistributedCachePointerWrapper::InitializeDataCacheFactory - No cache hosts are present in the farm. d4c6939c-b10d-4000-6d95-14caeefe67df
05/23/2014 13:03:22.82 w3wp.exe (0x46E70) 0x4CBA4 SharePoint Foundation DistributedCache ah24w Unexpected Unexpected Exception in SPDistributedCachePointerWrapper::InitializeDataCacheFactory for usage 'DistributedViewStateCache'
- Exception 'System.InvalidOperationException: SPDistributedCachePointerWrapper::InitializeDataCacheFactory - No cache hosts present in the farm. at Microsoft.SharePoint.DistributedCaching.SPDistributedCachePointerWrapper.InitializeDataCacheFactory()'. d4c6939c-b10d-4000-6d95-14caeefe67df
05/23/2014 13:03:22.82 w3wp.exe (0x46E70) 0x4CBA4 SharePoint Foundation General ajb4s Monitorable ViewStateLog: Failed to write to the velocity cache:
http://dca-app-617:90/_admin/search/listcontentsources.aspx?appid=e830c1b3-c3e4-4097-85fd-aa5248346d2e d4c6939c-b10d-4000-6d95-14caeefe67df
05/23/2014 13:03:22.82 w3wp.exe (0x46E70) 0x4CBA4 SharePoint Foundation Monitoring b4ly Medium Leaving Monitored Scope (Request (GET:http://dca-app-617:90/_admin/search/listcontentsources.aspx?appid=e830c1b3%2Dc3e4%2D4097%2D85fd%2Daa5248346d2e)).
Execution Time=109.695855199474 d4c6939c-b10d-4000-6d95-14caeefe67df
Anil LokaPlease try below mentioned steps:
1. Central Administration > Monitoring > Review job definitions > Look for following timer job "Application Server Administration Service Timer Job" > Disable
2. Then open windows administrative services (services.msc), stop SharePoint Timer Service
3. Clear SharePoint Timer configuration cache by following steps mentioned in below blog:
http://blogs.msdn.com/b/jamesway/archive/2011/05/23/sharepoint-2010-clearing-the-configuration-cache.aspx
4. Start SharePoint Timer Service and give it a few seconds so that the new XML files from the location you deleted then are re-populated.
5.Central Administration > Monitoring > Review job definitions > Look for following timer job "Application Server Administration Service" Timer Job > Enable
Please ensure that you mark a question as Answered once you receive a satisfactory response. -
Can not access Central Administration in SharePoint Foundation 2010
Hi,
I have installed SharePoint foundation 2010 in Windows 7 machine. I can able to login into Central Administration. I can view Main page. But I can not enter into even any one setting. If i click any link i am getting login page again and I entered same Username
and Pwd. its asking again and again .
For example if i click Manage "Web application" link the login page comes again and its not getting my Username and Password. Some times its showing Access Denied Error.Hi,
According to your post, my understanding is that you still got the login prompts in the Central Administration.
You can use the following steps, then check whether it works.
Open Internet Explore. Go to Internet Options -> Security -> Local Intranet -> Sites -> Advanced ,and add your central admin url.
You can also disable the
loopbackcheck as below.
Click Start, click Run, type regedit, and then click OK.
In Registry Editor, locate and then click the following registry key:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Lsa
Right-click Lsa, point to New, and then click DWORD Value.
Type DisableLoopbackCheck, and then press ENTER.
Right-click DisableLoopbackCheck, and then click Modify.
In the Value data box, type 1, and then click OK.
Quit Registry Editor, and then restart your computer.
For more information: http://support.microsoft.com/kb/896861
In addition, you need to enable automatically login on Internet Explorer if you use NTLM authentication.
For the full conditions must be met for Internet Explorer to automatically authenticate a user's logon and password and maintain security, see
http://social.technet.microsoft.com/Forums/nl/sharepoint2010setup/thread/0de7b015-3a76-47b5-8dd0-bb0cdc20f733
There are two similar threads for your reference.
http://social.technet.microsoft.com/Forums/sharepoint/en-US/305c4817-72ab-412e-b145-e89385720404/sharepoint-ask-for-username-and-password-for-central-admin-access-and-site-access
http://social.technet.microsoft.com/Forums/en-US/0cab9699-e1be-405c-8fe2-0f8b2f7b0159/access-denied-for-every-option-in-sharepoint-foundation-central-administration?forum=sharepointadminprevious
Thanks & Regards,
Jason
Jason Guo
TechNet Community Support -
File not found error when tried to open Document ID settings page
Hi
when i open sitesettings>site collection administratin >Document
ID settings
it shows
file not found error
adilHi,
first we need to figure out the error. change the web.config so that you can see the error on browser
1) Obtain the complete call stack instead of the default error page:
<SafeMode MaxControls="200" CallStack="false"/>
to
<SChangeafeMode MaxControls="200" CallStack="true"/>
2) CustomeErrors mode value (in the system.web section) is set to Off:
<customErrors mode="On">
to
<customErrors mode="Off">
Change these value in "c:\inetpub\wssroot" CA dirctory web.config and
C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\14\TEMPLATE\LAYOUTS\web.config .
now again try to do the action. you will get the error on screen.
Whenever you see a reply and if you think is helpful,Vote As Helpful! And whenever you see a reply being an answer to the question of the thread, click Mark As Answer -
I ran into a glitch on my system that I tried to fix myself. My NOD32 was always showing the yellow warning circle as my protection status when I started my computer. I tried to fix this every way I new how.
Then I started to get pop ups asking me to fix and then send system error reports to Windows. Some stating they were '''''critical.''''' So I sent NOD32 the e-mail below.
'''Me:''' I cannot seem to run a complete system scan. I keep getting stuck at 56% at the following point. C:\Documents and Settings\Owner\Application Data\
Mozilla\Firefox\Crash Reports\Pending
I also keep getting messages to send error reports to Microsoft constantly. I also have this code C:\pagefile.sys-error opening
Thank you for your assistance.
'''Their solution:'''
Based on the information you provided, we recommend that you upgrade to latest version of ESET NOD32 Antivirus and see if this makes a difference.
Please click or copy/paste the following ESET Knowledgebase article into your web browser for step-by-step instructions:
'''Me''' : I did as they requested and am fully upgraded and licensed with their new edition.
Ran a new scan same problem.
I sent them a new e-mail but now wonder if it is a Firefox issue as, C:\Documents and Settings\Owner\Application Data\
''Mozilla\Firefox\Crash Reports\Pending'' this is where the scan stalls.
Any help would be appreciated.
Thank you.Try delete the files in Pending folder and make the scan again, do not be afraid to delete the files see : https://support.mozilla.org/en-US/questions/679996
thank you
Please mark "Solved" the answer that really solve the problem, to help others with a similar problem. -
Error while checking in and storing: C:\Documents and Settings
Hi,
i have some problem in DMS , while doing Check in process after attaching documents in CV01n.
geeting error like "Error while checking in and storing: C:\Document and Settings.."
please suggest me how to solve this problem.
thx in advance...
Karthik.Hi Karthik,
There may be several factors contributing to this error.Some of these maybe:
-Storage category defined improperly/missing
-HTTP/FTP destination missing
-Incomplete Workstation application definition
-Incomplete Authorization
Please run through/search for each of these issues (discussed several times in the forum) and adopt corrective action wherever necessary.
Regards,
Pradeepkumar Haragoldavar -
Error while checking in and storing: C:\Documents and Settings\user\Desktop
Hi all,
I'm getting the following Error while checking in original to Content Server
"Error while checking in and storing: C:\Documents and Settings\user\Desktop" Message 26253
OAC0, OACT, CSADMIN settings seems to be Ok .
Settings in DMS SPRO - in dc10, dc20(data carrier used PC)- everything fine
-Authorization issues are not there
Earlier checking in was possible with same settings, but now we are getting this error.
From my end i had test the RFC Connection (SAPFTP, SAPFTPA, SAPHTTP, SAPHTTPA) through SM59 and its test run was successful. So the possibilty of RFC Failure was ruled out.
I knew this problem was arised as there is some issue in Content Repository, but not able to trace it out.
If any one knew what to do in this case, then let me know.
Secondly, what are the things need to be checked to identify the content repository Checking in Issue.
Regards,
S AnandError Resolved.
I had only executed the below command
./dbmcli on SDB>db_execute SET LOG AUTO OVERWRITE ON
OK
seems like Log file was full. but now its working.
Thanks for your suggestion.
Regards
S Anand
Maybe you are looking for
-
My ipod touch shows up as a camera on my pc and wont show up at all on itunes
my ipod touch shows up as a camera on my pc and wont show up at all on itunes
-
My ipad 3 Bluetooth stops working for several seconds every few minutes
My ipad Bluetooth stops working for a few seconds every few minutes...very annoying. Any solutions?
-
Web App Datetime - display if date is in the future, hide past dates
I have added a custom webapp field called "Start date" and set it to Datetime. NOw I would like to display the list item only if that datetime field happens in the future. I can't wrap my head around the logic of it. Does anyone have a clue? List lay
-
Problem with LOGIC AUDIO 5 (BIG BOX) any Help is Useful
Hi, I just sold my old Logic 5 Audio (big Box) on Ebay, but the new owner claims that he can't install the software without a serial(In my opinnion he should be able to install when he has the XSKey). Where can I ask for the serial, because I don't h
-
How to install Oracle Berkeley DB XML in ubuntu ?
Dear all : i have download Berkeley DB XML 2.4.16.tar.gz (36M) from http://www.oracle.com/technology/software/products/berkeley-db/xml/index.html. But i can't find any doc about how to install it ? cheers pink