Document on POS-DM and PIPE

HI ,
I am presently working in a retail implementation project. We are using sap -triversity at POS.
I am a BI resource and new to retail industry.
Can anyone send me the documents on POS Data Management.
I am also looking for the configuration document required for the data flow from POS TO BI through POS-DM.
I would also like to know in which scenarios IDC's or BAPI used,and which method will be preferrable.
Thanks in advance
Regards,
Lalitha
Message was edited by:
lalitha kumari

Some background understnading of POS systems
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/espackages/inventory%2blookup

Similar Messages

IS Retail - POS sales and return movement type issue

Hi,
We are facing issue whlile doing POS sales and return, when sales transaction data transfer to ECC from POS its create Idoc and material document.
When I look the material document for sales its showing movment type 252 instead of 251, as same in return material document 251 instead of 252,
When I look the cofiguration settings are perfect in SPRO.
How to resolve this issue and what changes need to be done
regards
Satish

Satish,
Check following IMG settings;
IMG - Sales and Distribution - POS interface - inbound - Aggregated Sales Control
IMG - Sales and Distribution - POS interface - Inbound - Movement type-dependent control of sales as per receipt
Bye - Muralidhara

POS sales and return movement type Issue

Hi,
We are facing issue whlile doing POS sales and return, when sales transaction data transfer to ECC from POS its create Idoc and material document.
When I look the material document for sales its showing movment type 252 instead of 251, as same in return material document 251 instead of 252,
When I look the cofiguration settings are perfect in SPRO.
How to resolve this issue and what changes need to be done
regards
Satish

Satish,
are you sure that you applied the right logic regarding signs in the POS inbound?
In WPUBON the Field E1WPU02-VORZMENGE must be negative so the POS inbound will consider this line item as sales and would put 251 als movement type if the sign is not minus it would put 252.
With the WPUUMS it is the same.
Are you using WPUBON01 or WPUUMS?
Regards Carsten

How can I digitalize a document text in PDF and export it to WORD?

Anthony
How can I digitalize a document text in PDF and export it to WORD?

If you already have a PDF document, ExportPDF can help you with this task. https://www.acrobat.com/exportpdf/en/convert-pdf-to-word.html
On the other hand, if you have a physical document, you'll need to scan it into a PDF document first.
Depending on what you need to do you may require different tools & services, so please help us out with more details.
Vlad

I have an ipad mini. From one moment to another a document that was created and used on pages app ( on the ipad mini) does not want to open ( When pressed it states " document cant be opened). How can I make this document open again?

I have an ipad mini. From one moment to another a document that was created and used on pages app ( on the ipad mini) does not want to open ( When pressed it states " document cant be opened). How can I make this document open again?
I have tried back ups and restoring, resetting, and even updating the pages app. And nothing has worked.

I have an ipad mini. From one moment to another a document that was created and used on pages app ( on the ipad mini) does not want to open ( When pressed it states " document cant be opened). How can I make this document open again?
I have tried back ups and restoring, resetting, and even updating the pages app. And nothing has worked.

How to create a new document type for PO and Requisition

Hi All
Can you please help me with the steps of creating a new document type for PO and PR. Also the steps that need to be update for the procure pay cycle to work properly.
Once the document type is been created. I want to create the PO referecing the new PR and PO document type.I am new in MM.
Thanks, Ros

Hi,
1. You can create new PR and PO docu types at the following path:
For PR docu type:
First you need to create number range for docu type or you can use existing number range also. The path for creation of no. range is
SPRO>Materials Management->Purchasing->Purchase Requisition->Define Number Ranges
Then create PR docu type at below path and assign no. range to PR docu type here only
SPRO>Materials Management->Purchasing->Purchase Requisition->Define Document Types
For PO docu type:
Follow same procedure as mentioned for PR docu type. Path is
SPRO>Materials Management->Purchasing->Purchase Order->Define Number Ranges
SPRO>Materials Management>Purchasing->Purchase Order->Define Document Types
If you want to create PO referencing new PR docu type, link the PR docu type to PO docu type at below path:
SPRO>Materials Management->Purchasing->Purchase Requisition->Define Document Types--> Link purchase requisition - document type
Regards
Chetan

When I try to same an image under the command 'save as' it will only let me save as file types 'firefox document' or 'all files' and when I try to look at them later they dont work. How can I save an image as the same file type it is on the web site?!

When I try to save an image under the command 'save as' it will only let me save as file types 'firefox document' or 'all files' and when I try to look at them later they dont work. How can I save an image as the same file type it is on the web site?!
== This happened ==
Every time Firefox opened
== I updated to one of the firefox versions (Not sure which one it was)

Thanks Alex, but sadly I already tried that. Neither .docx or .xlsx files show up in the content list. They both show as a Chrome HTML document so changing how Firefox addresses those doesn't help since it thinks its the same type of file. I don't think I can manually add files into the "Content Type" left side nav.

How to use documents MS-Word-Excel and Pdf on iPhone 4S

Before I bought the iPhone I was using Sony Ericson X1 Xperia. On this phone I could easily read & write on documents MS-word/excel and transferred them from and to my PC with Windows 7.
Till now I cannot find an easy way to transfer these documents onto my iPhone to edit, create or read. Have already installed iTunes, iCloud and one app numbers. Sofar no success to have it on my iPhone.
I there sombody who could help me out.
Thnks, Cor

http://itunes.apple.com/us/app/quickoffice-pro/id310723177?mt=8

Is there a way to place an encrypted document on the iPhone, a document that contains passwords and private information, really well protected from hackers?

Is there a way to place an encrypted document on the iPhone, a document that contains passwords and private information, really well protected from hackers?
Can such a document be exempted from the cloud feature, a feature that I use for the rest of my stuff?
If so, how can I do this?

Yeah, but 1Password charges for both the iPhone client AND the Mac/Windows client, and it ain't cheap! Plus, it only syncs via Dropbox, and where I work Dropbox is banned due to security concerns.
Sure, there is Secure Notes, a free form entry part of 1Password, but a bug in the program will not let you view all the text you can put in the field!! You have to EDIT the text to see the whole list! What if you accidentally delete or change an entry while scrolling through your entries??
Plus NONE of the programs I have tried, and I have tried a lot, can find text IN the file - do a search and it will tell you what file/folder the text is in, but YOU have to scroll down through 400 entries one at a time looking for the entry.
I use a program called Secure Text - I have many admin passwords, and DO not need a field based program. Secure Text is totally freeform entry. However, it suffers from the same search issue.
If someone knows of a secure text program that uses a file/folder type of layout, free form entry, AND can actually tell you where in the file/folder the text you searched for is, PLEASE let me know! Plus sycing via some method other than Dropbox would be a plus.
Before I got my iPhone, I used a program called Tombo for my WinCE based system AND my Windows workstation, and the synced up fine without iTunes, internet, DropBox type functionality or any of that horsecoller stuff Apple likes to throw on your neck.

To retrieve the PRT document (a PDF file) and insert the doc in PM order

Hello guys,
I have a challenging task in from printing as follows,
By using TC: IW3D we get print preview of PM Order Set (PM Print Program: YIPRJT01), currently the PRT document number prints in the PM Order. Now we have to insert the PRT documents (a PDF file) into the PM Order set rather than printing the PRT document number ( By using TC: IW33 by going OPERTIONAL TAB we will get the PRT document(a PDF file))
The requirement is to retrieve the PRT document (a PDF file) and insert the document in PM order set with out navigating separately by using the TC: IW33.
If you run the script in the print preview we can able to see PM the order set along with the PRT document (a PDF file).
Thanks & Regards
Vishnu

I'm also trying to print PRT document with shop papers and still not able to do so. I selected "P" for print on the control key and it should print but still didn't print.
If I understand it right, I think you are trying to do the same.
Have you resolved this issue ?
Thank you,
Sam

How do I convert a word document into a pdf and then upload it to a web site

How do I convert a word document into a pdf and then upload it to a web site so people can read it from my
site with Dreamweaver 4?. How can I do this? Can anyone please help? I'm only a newbie. Thanking you in anticipation.

First you need to install a means of printing to pdf from word. I like cutepdf writer ( http://cutepdf.com/Products/CutePDF/writer.asp ). Once installed you will print the doc in word and under the printer selection you choose pdf.
Once you have the file you put it in your local site folders and upload it using Dreamweaver. Be sure to link to it from a page so users can get to it and I would recommend giving the link a target of _black so it will open in a new window (see the properties inspector in DW).

How to create a document on a characteristic and key figure combination?

Hello,
I will need to create for my customer a document on a characteristic and key figure combination. I don't know yet which BW objects will be concerned, but I'm trying to understand how it works.
1) I call the document screen in RSA1.
2) I select InfoProvider data.
3) I click on Create, enter a name and a description and go to the next register (Log.DOc.Properties).
Question: What do I need to select here?
According to SAP Help, the following has to be maintained:
InfoProvider: How can I get my cube diplayed in the list?
Query: Same question. But is it necessary to select a query?
Key Figure: OK
All characteristics for which the Characteristic is Document Property indicator is set: OK
Hide Name: OK
Thanks in advance for you help, Nathalie

There's a link on the main support.mozilla.org page under "Customizing Firefox", to this article: [[How do I customize the toolbars?]] in case it helps you or anyone else finding this topic. It has a section on adding a new toolbar to Firefox.
I can't help you on creating your own button, textfield and a combo box for the new toolbar but I see you (Dinesh) asked this question on Jan 5, here:
http://groups.google.com/group/mozilla-labs-jetpack/browse_thread/thread/0d877e5afcbfe745# ''how to create a toolbar using add on sdk''

TA25361 I have a ton of documents and databases in AppleWorks v 6.0 that I can no longer open on my MacBook Pro. Is there any way to recover this info? Some documents can be opened and resaved with textedit, but not my database with all important addres

I have a ton of documents and databases in AppleWorks v 6.0 that I can no longer open on my MacBook Pro. Is there any way to recover this info? Some documents can be opened and resaved with textedit, but not my database with all important addresses.

I tried Peggy's List > Select All > Copy > Paste into an AW spreadsheet suggestion.
In my case, pasting into the spreadsheet lost all text formatting (mostly text set to bold). The results of formulas were pasted, and checkboxes were pasted as "on" or "off". The DB did not contain any pop-up menus or radio buttons, but I expect they would transfer as a number showing the list position of the chosen item.
Pasting the copied List view data into a Numbers table gave a result similar to that with AppleWorks. I selected B2 as the target cell (for top left cell of the pasted data) to avoid any effects of posting into a header row or column. Bold and regular text formatting looked the same as it had in AW's List view.
Based on that, I'd slip the 'paste into an AppleWorks Spreadsheet step, and paste directly into a Numbers Table.
Regards,
Barry

My iWork (pages and keynote) are not communicating with the iCloud. I haven't changed anything and all of the sudden there is no sync happening. My iCloud account is fine as i can create documents on my iPad and they appear on iCloud.

my iWork (pages and keynote) are not communicating with the iCloud. I haven't changed anything and all of the sudden there is no sync happening. My iCloud account is fine as i can create documents on my iPad and they appear on iCloud. However, when i change documents on my mac (documents that are supposed to be in the iCloud), the changes do not sync with my other devices nor with iCloud. Even when i create new documents on my mac and save them to iCloud, all seems okay and i can access them from my mac, however they do not show up in the iCloud and i can't access them with my other devices.
Most recent version of mountain lion updated over a month ago. New iPad in use for over a month.
thanks

The same thing is happening to me, Mail was fine about an hour ago and now is rejecting correct password. Typical when today I'm waiting some important emails!

I have created a email in Fireworks and wanted to make a line of text a hyperlink that would take the viewer to a page on my website. I want to attach the final document to my email and sending it out.

I have created a email in Fireworks and wanted to make a line of text a hyperlink that would take the viewer to a page on my website. I want to attach the final document to my email and sending it out.

1) design for no wider than 600px (otherwise it may not fit in email clients).
2) Slice up your newsletter design in segments for images and html areas with the slice tool.
3) add the <a href="http://www.yourwebsite.com">my website</a> link in one of the html areas.
4) export as generic html 4 code, and put the images in a separate folder.
5) upload all the images to your website's server in a folder (you cannot embed images in an email newsletter - they must link to externally hosted images).
6) change all the links in your html page to the ones that were loaded up on your server. For example, an image's source link would work out similar to this: <img src="http://www.yourwebsite.com/newsletter/image1.jpg" alt="alternate description of your image">
7) open the newsletter with working external images in Chrome or Firefox. Select the entire page content (ctrl-a), and copy it (ctrl-c).
8) create a new email in your mail client. Place the cursor in the body. Paste the newsletter (ctrl-v).
9) send your newsletter to hundreds of recipients, and get blacklisted by several email servers. Receive warning messages from your own hosting provider not to spam other users' email accounts.
10) realize this is too much of a hassle, and instead opt for a service such as MailChimp.
(The result in (9) depends on whether you sent out your newletter only to acquaintances, or not. But even then you might be warned off.)
Btw, many email clients turn off images in an email by default. You must provide the most important content as html, not as images.

Document on POS-DM and PIPE

Similar Messages

Maybe you are looking for