Document opens in print mode

I have downloaded a few pdfs from a site I pay to access.  I can't attach an example here.  We are allowed to post them for our staff to read, but the only way I can download is to print them to a pdf.
When I save the file and try to open it, it automatically opens the print dialog box.
The document is not protected and I can change the properties on it.
How can I have this open as a plain old pdf and not with the print dialog box open?
Thank you

Hmm, I'm using Acrobat 9 and I don't see that setting.
I did find Advanced > PDF Optimizer > Discard Objects and selected both Discard all JavaScript actions and Discard embedded print settings.
When I click OK I get Conversion Warnings > An error was encountered while processing images.
If I go to File Properties the Security Method says No Security and everything is set to Allowed.
You've been very helpful, any other suggestions?

Similar Messages

  • Word documents open in compatibility mode

    Word documents open in compatibility mode, I can not save any documents nor make any changed to them. Any word document I open gets the same "sickness"
    Thanks for help

    Hi,
    I am writing to see how everything is going with this issue. Have you tried to update the printer driver? Is the problem resolved?
    For more research, this article may help us to continue to troubleshoot the issue
    http://support.microsoft.com/kb/918790
    Feel free to post back. Thanks.
    Tony Chen
    TechNet Community Support

  • SharePoint document open in edit mode

    I am successfully able to click on file://urltosharepointdocument.docx on my outlook email and the SharePoint document opens in edit mode and i can edit and saves it perfect. But when I use the following in html page i.e.
    <a href="file://urltosharepointdocument.docx">Test</a> it prompts for Open and when i click on it and edit the stuff it saves it fine, but I don't see the edit data, it shows the correct modified date but without edits.
    Can anyone please guide me how to achieve the above or how to use file://urltosharepointdocument.docxx as link in a html page
    Thanks,
    John

    Hi John,
    Kindly share your OS, Office and IE version details, thanks
    Regards,
    Pratik Vyas | SharePoint Consultant |
    http://sharepointpratik.blogspot.com
    Posting is provided AS IS with no warranties, and confers no rights
    Please remember to click Mark As Answer if a post solves your problem or
    Vote As Helpful if it was useful.

  • GRPO Document  Opening in Update Mode

    Hi All
    When i saved the GRPO Document and again i try to navigate to the saved document it is opening in update mode and if i update then it become 'ok' mode and again if i try to navigate the posted document  it is opening in update mode again
    how can i overcome this issue
    iam using PL10 and iam also using User Defined fields in the Title Level Document
    Thanks in Advance

    Hi Madhu......
               I think you have applied FMS on any one of the field and kept it refresh regularly on some other field. So either you should remove the FMS or you should keep it on display saved values. This will fix your problem.....
    Regards,
    Rahul

  • DMS: Documents opened in edit mode(CV02N) are not deleted from Temp Folder

    Hi All,
    My query is whenever i edit documents like word,pdf or autocad files in cv02n, it make a copy in my c/windows/temp folder but doesnot delete them when it close the transaction. i have given PC data carrier with path as %Temp% & in profiles i have defined the path as c/windows/temp/
    So is there any solution by which the files opened in the edit mode will be deleted when i close the transaction or else after some specified time it should get deleted from the temp folder. Is there any standard configration for it.
    Note: I have tried the 741388 note but it is only for display mode documents.
    Regards
    Nishant.

    Hi Nishant,
    unfortunately this is the standard behavior as for editing the application need a
    temporary file and this file is still stored after closing the application to enable a re-checkin in the future too.
    So the only possibility is to delete the temporary files from C:\Windows\Temp after some time manually. There is no functionality in the system standard as the SAP system has no control on the windows folders. 
    To achieve a very similar behavior you can set the "Delete after checkin" flag in transaction DC30 for this applications and see if this will meet your requirements.
    This flag means that the original file gets deleted after you check them into a storage category. Maybe this could be usefull.
    Best regards,
    Christoph

  • Can you open a document in Photoshop cs6 and automatic have it open in print size

    I work in 500 photos a day and print size helps me out. is there a way to have the document open in print size to save me a step?

    It's possible. That would be called an Event Script. and it would be placed in the Event Scripts Only folder under Scripts in the Presets folder.
    Then you would open Photoshop and go to File > Scripts > Event Scripts Manager to have this script run each time you open a file.
    The problem is to find a script that already does this or ask someone to write it for you.
    You can ask in: http://forums.adobe.com/community/photoshop/photoshop_scripting
    Gene

  • Can no longer print from Photoshop CS^ have upgraded drivers error message reads There was an error opening your printer. Printing functions will not be available until you have selected a printer and reopened any documents."

    I have upgraded my iMac to Yosemite but now my two Canon Printers no longer print from Photoshop CS6. I have upgraded the drivers. All other applications including Lightroom are fine. I am receiving an error message as follows:"There was an error opening your printer. Printing functions will not be available until you have selected a printer and reopened any documents." How can I get the OS to return a list of printers to Photoshop when Photoshop requests a list.

    Have you printed to this printer from 10.10 before?  If so, check your connections.

  • Adobe Acrobat 9 Pro do not open when printing a pdf document. Can anyone help?

    Adobe Acrobat 9 Pro do not open when printing a pdf document, instead I open it with Adobe Reader X to be able to print.
    Can anyone help?

    Hi Edna,
    It sounds like Adobe Reader X is your default PDF file handler. Launch Adobe Reader X.  Choose Edit > Preferences > General.  Click the 'Select Default PDF Handler' button at the bottom and choose Acrobat 9 from the drop-down menu.  Click Apply, then OK.
    Restart your computer.  Acrobat 9 should now be your default PDF file handler again.
    -David

  • Document always opens in Preview mode, prefer Normal mode

    Documents always open in Preview mode, while I'd prefer the Normal mode. I tried setting the mode to Normal and saving the document, but next time I open it it again opens up in Preview mode. Can I change this somewhere so it defaults to Normal mode?
    Thanks for your help or suggestions.

    The preview that was used when the file was saved is saved with the
    file. If you save it in preview mode, it will open that way.
    If that's not the case, you may have a slight corruption in your
    preferences. Try trashing them if this bothers you.
    Bob

  • There was an error opening your printer. Printing functions will not be available until you have selected a printer and reopened any documents. Error message in PhotoShop CC

    Printing from PS CC worked fine today. I made no changes to preferences. In between working with 2 projects, the first one printed fine, the second gave me this Error Message.
    There was an error opening your printer. Printing functions will not be available until you have selected a printer and reopened any documents.
    Now I've checked for updates for my printer, reset my printer, reset PS CC preferences, picked my printer as Default and Last Used, and rebooted. I've followed all the recommended fixes for this issue I could find here and on the internet. I can print fine from any other program. Alas, the error message keeps popping up and I can't print.
    PS CC is up to date
    Running OS 10.10.2
    HP Printer updated
    Help?

    Have you printed to this printer from 10.10 before?  If so, check your connections.

  • Need Javascript to force reading mode on document open...

    Need Javascript to force reading mode on document open... Does anyone know how to do this? Acrobat 8 does not come with a custom action for opening a page in reading mode...
    Would also like the remove the page scroll bar from the document window. Can this also be applied using Javascript?

    This code will embed a script that will open the doc in Reading Mode:
    this.addScript("OpenInReadingMode","app.execMenuItem('ReadingMode');");
    You can't remove the toolbar from the document window, only in full screen mode it's invisible.

  • Open a document in read only mode

    HI All,
    I created a panel in which we have
    edit box which shows the document path
    Browse button to allow a user to select an indesign document
    "Open read only" button.
    My requirement is that after selecting an Indesign document if user click to "OPen read only" button then it will opened selected document in read only mode.
    I will be highly thankfull to all community memeber if anyone can give me some hint to achieve this.
    Regards,
    Alam

    Alam,
    If you change the attributes of the file before opening it to read only the file will be opened as read only by Indesign. And then you could place a responder that could clear this read only flag when the file is being closed so that the permissions are restored to the original state.
    Manan Joshi
      - Efficient InDesign Solutions -
    MetaDesign Solutions
    http://metadesignsolutions.com/services/indesign-development.php

  • I can't scan a document in my printer and have it open in Reader like before

    can't scan a document in my printer and have it come up in the adobe acrobat reader like it did before my last update...can anyopne suggest a solution...have been on hold with adobe for 46 minutes.

    Hi lostinma,
    Are you scanning and then saving to PDF with your scanning software? What happens when you try to open the PDF in Reader? Do you get an error message?
    Reader doesn't allow you to create PDFs, so you wouldn't be able to scan directly into Reader.
    Best,
    Sara

  • There was an error opening your printer. Printing functions will not be available until you have selected a printer and reopened any documents.

    I've never had this problem before. It only affects Photoshop CS6 and CS5 that I have installed. I'm running MAC OS 10.9.5
    I have three printers and HP and two Epsons, and I get this dialogue when trying to print from Photoshop CS6 or CS5.
    There was an error opening your printer. Printing functions will not be available until you have selected a printer and reopened any documents.
    Other applications print fine on all three printers.  I tried deleting the Photoshop Prefs numerous times without results.
    Does anyone have an answer for this?
    Thanks.

    Have you printed to this printer from 10.10 before?  If so, check your connections.

  • Is there a way to make InCopy open all documents in normal screen mode, always?

    Is there a way to make InCopy open all documents in normal screen mode, always?
    Now it opens in the screen mode the InDesign page is in when checked in. We don't want that.
    Thanks,
    Frederik

    No, there's no way to get rid of it in InCopy.  InCopy opens layouts in the mode the InDesign user saved them, including Normal vs. Preview, Frame edges showing or not, Hidden characters showing or not, and so on.
    You could try asking the designers to switch to Normal view before saving the INDD file.  Or you could assign a keyboard shortcut to the Normal view in InCopy and tell everyone to use that. We're on Macs so we use Control-N for Normal and Control-Shift-N for Preview.
    AM

Maybe you are looking for