Document / poster fold names and common characteristics?

Hello all,
I am trying to figure out the lingo... I am creating a long fold-out quick start. It will have five panels per side and probably fold according style four times. I haven't settled on a size but I am guessing about 27.5 inches by 8.5 inches (each panel would be 5.5 x 8.5).
Like this:
Basically, I am trying to understand/learn the proper terminology for when I propose this format.
Besides calling it a five panel, 4 folds, accordion style... is their a more appropriate name?
I know... double parallel, gate fold, broadside, roll, etc... but what is this called?
Anything other tips or knowledge I should know about professionally printing/folding this format?
Your feedback is greatly appreciated. Thank you.

I'm not an expert in folding. However, I know there's a website that specializes in this. Check this out:
Foldfactory.com

Similar Messages

Did you change your home folder name and now your computer is all wierd?

Hello. I did the same thing and I called apple help and they just couldn't help me on this subject. I was messing around with the computer and I found a proper solution where you don't have to re-install the software. Here are the steps:
Step one: login (if your not already logged in) into the account. It should still be there as the original name.
Step two: Open your Finder or HD and select the Users folder.
Step three: You should see your original account name as well as any one else's account name if you have other people sharing the computer. In addition to this you will also see the name you attempted to use as a replacement for your old Home Folder name, note that this is a new unexpected user.
Have it in column mode for the easiest experience.
In the new folder you created (this is the user on the list that you named your original folder) You will find all your old settings. Don't do anything yet! take and highlight all of the content in that folder by holding shift and clicking or your preferred way. Drag ALL the content to your original home folder, which should only have library and Documents. (if it has more than it's okay) it will tell you that there are already folders with that name and will ask permission to replace them. Say yes.
Step four: log out or restart your computer.
Step five: log in, and or wait till it's restarted Your desktop and dock should be restored to the way you originally had it. Don't change the name on it again. if you want to change the name, you'll need to create a new user.
Step six: Thank me and leave me complements or questions.

I think it is rather surprising that the Mac OS allows you to change the name of the home folder and doesn't seem to put up a warning or anything.
I did change the short name used on my home folder about three weeks ago. I used ChangeShortName Utility v1.2 which I got from here:
http://www.macosxpowertools.com
All indications are that using this utility has been 100% successful.
I did create a new temporary account with administration privileges and I ran the utility from that account. This meant I wasn't changing the short name on the account I was actually using.
It is very important to read the "read me" with ChangeShortName so that you are 100% sure of what you are doing when you use it.
Also, of course, back up first

Automator script search document for file name, and rename file to date

Hi all,
I'm having a hard time with Automator... and I can't figure out how it's done!
Searched the web for it a couple of times, spend hours with Automator already, but I guess my need is random!
The thing is:
I got a folder with 1066 files, all the files has random names.....
I got a document (now it's html, but can convert it to PDF or txt or so ever....) with the coressponding random file names in the html.... some words before that there is the date the photo was taken in this format: 08/25/11
Now I want somehow make automator search that folder each filename... match it in the document with the filename, and rename the files in the folder to the date the photo's were taken.... and that for all 1066 files.....
anybody a great idea? Some help? I'm a real newby at Automator scrips!
thanks

Have you considered A Better Finder Rename 9?
A Better Finder Rename 9: The Batch File Renamer for Mac OS X
Otherwise, what you propose seems to be rather like carving the Pieta using a plastic butter knife. But, if you want, here's one example of a rough algorithm to start ...
* translate the HTML to ASCII text in this format: filename (date)
* read one line at a time from the ASCII file
* for each line, search the folder for the file
* rename the file according to the (date)
BTW, you might avoid a strict renaming according to just the date.
Best luck with this project.
JJW

Split library, folder names and paths are in a mess. Need to get library all in one place on my storage drive and off my OS drive. In a fix!

Help appreciated on this one as I'm OK on my PC but far from a whizz. Done a little investigation and reading of https://discussions.apple.com/thread/5199195?start=0&tstart=0 but I just can't seem to get anywhere and end up with a very underpopulated iTunes.
To set the scene. Been using iTunes for many years and have had several PCs in this time and migrated the library over. Each time I have had a half hearted attempt at organising it all on 1 drive but it has obviously not gone to plan hence my split library and weird file/ folder paths. e.g.
for some reason my recently downloaded apps are stored in C:/users/mark/my music/itunes/mobile applications. I also have numerous itunes library files on this drive
my music is mainly stored on my storage drive B:/itunes music/music/music. On both drives I have mobile applications folders each with many apps in.
I have set my itunes media folder location to B:\iTunes Music\Music so have no idea why all my downloaded apps end up on the C:/, nor have I any idea why they appear in the library seing as the itunes media folder is set to B:/
I hope you can make heads or tails of this as I am even confusing myself as I type!
Help appreciated as every time I try and move stuff around I end up with a very depleted library and have to remember what I moved where to put it back!
Mark

So I right clicked to find the files and relink, and it did not work. The folder name disappeared.
It didn't disappear, it moved (because you told Lightroom to move it). It moved from the incorrect folder location, to the new folder location. Please look in the new folder, in whatever location it is in, not in the old folder and the old location, and you will find the photos.

Change Document Library Folder Name from client (JavaScript (JSOM) or Rest)

Hi
According to :
http://social.technet.microsoft.com/Forums/sharepoint/en-US/23441a0d-022a-4d97-8058-b75f32e342d2/rest-api-to-rename-the-folder-move-folder-copy-folder-prog-lang-is-java?forum=sharepointdevelopment
Renaming a folder with Rest is not possible.
and based on:
http://msdn.microsoft.com/en-us/library/office/jj245697(v=office.15).aspx
name property doesn't have any set.
Is it means that renaming a folder is not possible by JSOM or REST?!
Regards

Hi,
The following JavaScript Client Object Model code for your reference:
<script type="text/ecmascript">
ExecuteOrDelayUntilScriptLoaded(UpdateListItem, "sp.js");
function UpdateListItem(){
var clientContext;
var oWebsite;
var oList;
clientContext = new SP.ClientContext.get_current();
oWebsite = clientContext.get_web();
oList = oWebsite.get_lists().getByTitle("DocumentLibrary");
oListItem = oList.getItemById(1);
this.oListItem.set_item("FileLeafRef", "Folder Name");
this.oListItem.update();
clientContext.load(this.oListItem);
clientContext.executeQueryAsync(onSuccess, onFailure);
function onSuccess() {
alert('Update succeeded.');
function onFailure(sender, args) {
alert('Request failed. ' + args.get_message() + '\n' + args.get_stackTrace());
</script>
More information:
http://msdn.microsoft.com/en-us/library/office/jj163201(v=office.15).aspx
Thanks,
Dennis Guo
TechNet Community Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Dennis Guo
TechNet Community Support

Long folder names and backing up on a Windows server

So Mail creates these really long folder names in the Home/Library/Mail folder. Something like [email protected] Not usually a problem. But I just found myself in a bit of a pickle. The trouble is, I'm trying to back up the email of the Mac users in the office onto a Windows 2003 server. There is this odd and very irritating limitation with Windows servers and Macs and the number of characters allowed in a filename and/or path name.
So this is all a big set up for the question on my mind: Is it at all possible to rename those long folder names to something more succinct? I mean I know it's possible but when you do so, when you open Mail.app back up, it creates a new folder with its standard naming convention.
I have confirmed that renaming the folder manually and backing up without opening Mail.app again works just fine.
Thanks!
Mitchell Moss
MacBook Core 2 Duo Mac OS X (10.4.9) 2.0GHz, 1GB RAM, 120GB HD

I apologize. I was unclear in my description of my new problem. I have some users using Mail.app and others using Entourage. I've encountered the "file too large" problem with Entourage users. For the record, I'm using the backup program iBackup. In the log file it creates, it states that the Entourage database file is too large.
For example, one person has a 2.6GB Entourage database file. iBackup will start copying and get to around 2GB, maybe 2.1 or 2.2. It will then appear to quickly finish. Looking in the backup folder on the server, it shows the entirety of the Office 2004 Identities folder to be 96KB....
Is this some sort of weird limitation on the part of Windows Server 2003 and how it deals with communication from Macs, or is it just an issue with iBackup? I have copied much larger files using iBackup to back up to a locally-attached Firewire hard drive successfully, so I am leaning towards a strange Windows Server issue.
Thanks for any input!

Mac OS X disallow same folder name and filename under the same directory

I noticed Mac doesn't allow me to create the same filename and folder name under the same directory.
Seems like this constraint is unique only to Mac since I can do it in Unix and Windows.
Why is this so?
Mac OS X (10.4.9)

In Windows, there's probably a normally hidden extension being added to the file and/or the folder.
In Unix, I'm NOT able to create both file "foo" and folder "foo". What version of Unix are you using that allows this? (Mac OS X is built on top of Unix.)
One workaround would be to give the file a reasonable extension; foo.txt or foo.doc or foo.jpeg or whatever.
Doug

Folder names and Classical Music

I know I am probably in the minority but I mainly listen to classical music. The iTunes default folder naming convention uses the Artist to create folder names - THIS IS NEXT TO USELESS FOR CLASSICAL MUSIC!!
Can this be altered in any way to use the Composer instead of the artist?
Ideally, the folder structure shoudl either be Composer\Album or Composer\Genre
Any Ideas?
Thanks.
PS.Am using iTunes 7.3

Hi, I've been struggling with the shocking limitations of iTunes since I finally took the plunge and bought an iPod shuffle (for a 12 hour journey in prospect) last week. It seems simply incredible to me that a company with Apple's experience and reputation should put out such primitive software - and this isn't a beta, it's version 7.1! Why can't we specify the sort-default? Why can't we define an album to be played straight through, but not necessarily with its pauses between movements elided? And why can't we suspend the amazingly tyrannical auto-typing that won't allow any version of a word than the one you typed first, without you 'cheating' by copying and pasting from another application so that the programme doesn't recognise the keystrokes?
What I've devised, as a way to insist that my Brahms symphonies are played whole and in the right order, is using 'get info' on each group of movements to remove the 'album title' text altogether; then using 'get info' separately for each track, defining the name of each with an album name, 'a', 'b', 'c' and so on. As long as you only have 26 tracks you need to keep together, it works! There are obvious limitations, not least the time and trouble it takes, but the next step for me is to list the 157 Carl Nielsen songs I have by numerical sequence, ripping out 'The Lesser Known Nielsen' from the whole lot (which shuffles the into artist order - the software is blinded by classical song recitals shared by more than one performer) and replacing each track's album title with '000001', '0000002' and so on - though I'm going to enter a global album title of '000000' for the lot before I start, to save myself typing four, five or six 0s each time!
Apple, if you're listening: this software isn't up to scratch, and even if classical music lovers are in the minority, and less likely than most to buy their music from your site, this level of shoddiness diminishes you. Sort it out, please.

Can't get a comparison between a folder name and a string to work

Dear community,
I have a really simple ExtendScript-example that I just can't get to work and I have no idea what could be wrong. I'm trying to write a script that goes through all the items in the project panel and stores references to all the folders which names are like "layer1", "layer2", and so on, in an array. This is the code that should alert 3 times in my case, but it doesn't alert once..
for (var i=1; i<=app.project.numItems; i++)
    if ((app.project.item(i) instanceof FolderItem) && (app.project.item(i).name == "layer"+i))
        alert("found folder = " + app.project.item(i).name);
Inside the project in the root-directory there are 2 comps and 3 folders named 'layer1', 'layer2' and 'layer3' - so I should see 3 alerts when executing the above script. For testing-purposes I changed the second part of the if-statement to a 'static' value like so:
.. && (app.project.item(i).name == "layer1")) --> then it works! But I need a dynamic solution..
Thanks very much for ANY help in advance!
Greetings,
Gilbert

I just tried the code and it only alerted once for me. The issue with your code is that it requires the "Layer" named folders to always be the first x items in the project file. So what is happening for you is that...
If any item appears before the first "Layer" folder then you are effectively comparing random names to each other that will never match.
ItemSomethingElse
RandomFolder                 == Layer1     (false)
Layer1                              == Layer2     (false)
Layer2                              == Layer3     (false)
Layer3                              == Layer4     (false)
Layer4                              == Layer5     (false)
ItemSomethingElse
What you need to do to keep it dynamic:
1) Gather instances of all the folders in your project into an array.
2) Loop through that array checking for indexOf "Layer".
3) If there is a match...
4) Compare that name in another loop. You'll have to determine the max number to loop through for your search, like 25 or 50 or something that won't loop forever.
5) If a Layer# match is found then run your alert.
ItemSomethingElse
RandomFolder                 indexOf("Layer")     (false, do not add)
Layer1                              indexOf("Layer")     (true, add instance to folderArray)
Layer2                              indexOf("Layer")     (true, add instance to folderArray)
Layer3                              indexOf("Layer")     (true, add instance to folderArray)
Layer4                              indexOf("Layer")     (true, add instance to folderArray)
ItemSomethingElse
So something like this should work:
var folderArray = new Array();
//Loop through project grabbing folders with layer in the name
for (var i=1; i<=app.project.numItems; i++){
     var curItem = app.project.item(i);
     if(curItem instanceof FolderItem && curItem.name.indexOf("layer") != (-1)){
          folderArray[folderArray.length] = curItem;
//Set cap for number appended to "layer"
var cap = 25;
var curName;
var folderArrayLength = folderArray.length;
//Loop through new "layer" array
for(var l=0; l<folderArrayLength; l++){
     for(var c=1; c<cap; c++){
          //Dynamic name
          curName = "layer"+c.toString();
          //Current folder name
          folderName = folderArray[l].name;
          //Compare them, alert if the match
          if(folderName == curName){
               alert("found folder = " + folderArray[l].name);
               break;//End comparison once found

Cannot clear document posted with FBS1 and Reversed with F.81 in F-03

We have recently turned on OIM for a Balance Sheet account and are in the process of clearing it. The postings in this account were generated with FBS1 (Accrual/Deferral Document) and reversed with F.81.
Majority of the documents displayed with FBL3N cleared no problem after open item management was turned on, however, there are a handful that are not displayed in F-03 (or F.13).
Please consider the following when answering:
OIM was turned on for the account using ZRFSEPA02 (Copy of the standard/not-delivered program for turning on OIM).
All of the entries were reversed with F.81 and the header of the documents does not contain a "Reversal Date".
I have already tried turning off OIM with ZRFSEPA03 and then turning it back on again with ZRFSEPA02.
My settings in FS00 are correct for the GL Account.
Hundreds of items were cleared. There are 7 documents that don't appear in F-03 or F.13
Also, please do not give me "Beginner level" information such as "Tick the OIM box for the GL Account in FS00" (You cannot turn on OIM in that manner for an account that has line items posted to it - I have been doing R/3 Configuration for 23 years, so I am an advanced Analyst in the FI/CO Area).
Thanks - Back to searching OSS!

Hi,
Actually when report is executed we get following message
Do not use the report program to set up open item management for the
account.
Create a new account with the correct account assignment. Post your
items to the new account. If you want to use the original account
number, you must bring the account balance to zero, change the account
assignment, and repost the items. You can remove the old items by
archiving the documents.
Hence, it is risky to execute this report.
Are you getting these documents in FB03 ?
Regards,
Tejas

How can i change my mac's home folder name and my mac's name?

I just got my macbook yesterday, and i was in a rush in setting it up coz i was in the office, I accidentally put my whole name. I just want my nickname in my home folder and to be my mac's name. How can I do that? Do i need to create another admin account? Can I remove the old one in case? Thank you!

MacBook Pro
Mac OS X v10.6 Snow Leopard
http://www.apple.com/support/snowleopard
User short name home directory

Finder "Documents" shows folder names but I cannot click on any of the folders or files?

Any idea what is going on here? Only happens if I navigate to 'Documents" from the Finder Sidebar. If I go to 'Documents' through my user root, it is fine.

And what happens if you change the view to List? What should be displayed in place of the circle is an icon. Is your Home folder relocated by chance? Or is the Documents folder relocated? I would start by this:
Repair the Hard Drive and Permissions - Mavericks, Lion/Mountain Lion
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported then click on the Repair Permissions button. When the process is completed, then quit DU and return to the main menu. Select Restart from the Apple menu.

I want to save a document under another name and make changes. In Lyon there is no "Save As" under File.

in Lion, that is!

Use either the Duplicate instruction, or the Export instruction. Both should be available in the File menu.
Duplicate is probably the easiest, though it's not quite in accord with previous logic: when you duplicate a file, you'll get an immediate new window displaying the same contents as the old one. The option to rename and save in a different place (and in a different format, if desired and possible) will happen the first time you "Save" the duplicated document.

My bookmarks mysteriously change folder names and positions in the tree

Sometimes when I go to add a folder, it gets repeated in different places, or overwrites an existing bookmark folder and mysteriously changes its location. It is very frustrating to try and categorize bookmarks when there is some gremlin or evil elf that confuses things. Category folders get renamed yet have totally unrelated links within it. Why can't bookmarks work like with some semblance of dependability like Windows Explorer does? What the hell is going on with bookmarks?!??

This can be a problem with the file places.sqlite that stores the bookmarks and the history.
* http://kb.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox

Saving an image as PNG to a specific location, and appending the document's existing name.

Hello
I'm building a very complex action that references several scripts. One of the scripts needs to save the existing canvas as a .png file to a specific directory, and rename the .png with the document's existing name and adding "-SCREEN" to the end. So the name sould be "originalname-SCREEN.png"
I found a script below that almost kinda works. It can find the directory, but it is cropping the image for some unknown reason. It also does not append the name (I have not looked into how to do that at all yet).
Is anyone able to figure out how to fix this script, or perhaps lend some insight to how I might go about generating a new script?
I'm not familiar with JS, but I'm learning. Slowly...
Thank you.
#target photoshop
app.bringToFront();
$.level = 0;
// Globals
Settings = {
storedPaths: {},
storedSelections: {},
scriptName: "Save PR JPG LANDING",
units: "pixels"
// Main entry point
main();
function main() {
var formatOptions;
// Create JPEG save options
formatOptions = formatJPEG(FormatOptions.OPTIMIZEDBASELINE, "10", "3", MatteType.NONE, true);
// Save copy of document as
docSaveAs(formatOptions, "Add After", "-LANDING", "No Change", "Path", "~/Desktop/PR/Landing Page (RGB | 105px W x 108px H | 72ppi)/", "");
// Functions
function docSaveAs(formatOptions, nameChange, nameText, newCase, destType, destRef, storeName) {
var hasPath, f, name, nameArray, n, ext;
if (!documents.length) { logErr(arguments, "noOpenDocs"); return; }
if (!formatOptions) { logErr(arguments, "noFormatOptions"); return; }
if (nameChange=="Replace" && !nameText) { logErr(arguments, "badNameValue"); return; }
f = fileGetFolder(destType, destRef);
if (!f) { logErr(arguments, "noDestFolder"); return; }
try { activeDocument.path; hasPath=true; } catch(e){ hasPath=false; }
name = activeDocument.name;
if (hasPath) {
nameArray = name.split(".");
n = nameArray.length-1;
ext = nameArray[n];
switch (nameChange) {
case "Add Before": nameArray[0] = nameText + nameArray[0]; break;
case "Add After": nameArray[n-1] = nameArray[n-1] + nameText; break;
case "Replace": nameArray = [nameText, ext]; break;
name = nameArray.join(".");
else {
ext = {"[BMPSaveOptions]":".bmp", "[DCS1_SaveOptions]":".eps", "[DCS2_SaveOptions":".eps",
"[EPSSaveOptions]":".eps", "[GIFSaveOptions]":".gif", "[JPEGSaveOptions]":".jpg",
"[PhotoshopSaveOptions]":".psd", "[PICTFileSaveOptions]":".pct", "[PICTResourceSaveOptions":".pct",
"[PixarSaveOptions]":".pxr", "[PNGSaveOptions]":".png", "[RawSaveOptions]":".raw",
"[TargaSaveOptions]":".tga", "[TiffSaveOptions]":".tif"}[formatOptions.constructor.toString()]||"";
switch (nameChange) {
case "Add Before": name = nameText + name; break;
case "Add After": name = name + nameText; break;
case "Replace": name = nameText; break;
if (!name) { name = "Untitled"; }
name += ext;
switch (newCase) {
case "Lowercase": name = name.toLowerCase(); break;
case "Uppercase": name = name.toUpperCase(); break;
try {
f = new File(f.fullName+"/"+name);
activeDocument.saveAs(f, formatOptions, true);
Settings.storedPaths.lastCreated = f.fullName;
if (storeName) { Settings.storedPaths[storeName] = f.fullName; }
catch(e) { log(arguments.callee, e); }
function fileAppend(path, data, encoding) {
var file;
file = new File(path);
file.open("a");
if (typeof(encoding) == "string") {file.encoding = encoding;}
file.write(data);
file.close();
function fileGetFolder(srcType, srcRef) {
var path, f, msg;
switch (srcType) {
case "Last Created": path = Settings.storedPaths.lastCreated; break;
case "Path": path = srcRef; break;
case "Named Path": path = Settings.storedPaths[srcRef.toLowerCase()]; break;
if (!path) {
msg = "Select a folder:";
if (Settings.lastFolderPath) { f = new Folder(Settings.lastFolderPath).selectDlg(msg); }
else { f = Folder.selectDialog(msg); }
if (f&&f.exists) { Settings.lastFolderPath = f.fsName.split("\\").join("/")+"/"; }
else { f = new Folder(path); }
if (!f||!f.exists) { logErr(arguments, "noFileSystemPath"); return; }
return f;
function fileWrite(path, data, encoding) {
var file;
file = new File(path);
if (file.exists) {file.remove();}
file.open("e");
if (typeof(encoding) == "string") {file.encoding = encoding;}
file.write(data);
file.close();
function formatJPEG(format, quality, scans, matte, embed) {
var result = new JPEGSaveOptions();
try {
result.formatOptions = format;
result.quality = parseInt(quality);
result.scans = parseInt(scans);
result.matte = matte;
result.embedColorProfile = embed;
catch(e) { log(arguments.callee, e); }
return result;
function log(v, err, msg) {
// Initialization
if (!Settings.debug) {
var pathArray, date, str;
Settings.debug = {
delim:String.fromCharCode(13, 10),
path: Folder.userData+ "/Script Builder Files/" +Settings.scriptName+ " - Log.txt",
text:""
date = new Date();
str = "Begin debug log: " + date.toLocaleString() +Settings.debug.delim;
str += "------------------------------------------------------------" +Settings.debug.delim;
fileWrite(Settings.debug.path, str);
// Error logging
if (typeof v == "function") {
v = "Error in " +v.name+ "(): ";
if (err && msg) { v += msg + " " + err.message; }
else if (err) { v += err.message; }
else if (msg) { v += msg; }
else { v = v.substring(0, v.length-2) + "."; }
// Normal message logging
else {
if (typeof v != "string") {
if (v == undefined) {v = "undefined";}
else {v = v.toString();}
if (Settings.debug.path) { fileAppend(Settings.debug.path, v + Settings.debug.delim); }
function logErr(src, id) {
var err = {
badChannelValue: "Invalid channel number entered.",
badColorValue: "Invalid color value entered.",
badDocDimsValue: "Invalid document dimensions entered.",
badExportValues: "Invalid file path or file name value supplied for export.",
badNameValue: "Invalid name value supplied.",
badNumberValue: "Invalid number value supplied.",
badPathName: "Path name supplied is not unique.",
badRefEdgeOuput: "Output method cannot be used when decontaminating colors.",
badSubdivValue: "Subdivisions value must be an integer between 1 and 100.",
badTestValue: "Invalid comparison value supplied.",
fileError: "Could not read file.",
fileExists: "A file of the same name already exists in the chosen location.",
flatImagesOnly: "This function only works on flattened images.",
layerDataError: "An error occurred while reading the layer settings.",
logNotEnabled: "Log must be enabled in order to assign file path.",
multiLayerOnly: "More than one layer must be selected.",
noClipImageData: "No image data on clipboard.",
noDocFile: "Document has never been saved.",
noActionName: "No action name specified.",
noActionSetName: "No action set name specified.",
noBkgdLayer: "There is no background layer.",
noDestFolder: "Destination folder not defined.",
noFile: "File does not exist at the specified location.",
noFileSystemPath: "No file or folder path was chosen.",
noFilterImg: "Image file does not exist, or none was selected.",
noFilterMask: "Layer has no filter mask.",
noFolder: "Folder does not exist at the specified location.",
noFormatOptions: "The \"formatOptions\" parameter is not defined.",
noHTMLExporter: "The \"htmlExporter\" object does not exist or is not valid.",
noLayerArtwork: "Layer has no image data.",
noLayerComps: "Document has no layer comps.",
noLayerFX: "Layer has no effects.",
noLayerMask: "Layer has no layer mask.",
noLogTextFile: "Log file path should point to a text file.",
noLogFile: "Log file path does not point to a file.",
noNameValue: "No new name entered.",
noOpenDocs: "There are no documents open.",
noQuicktime: "File format requires QuickTime.",
noSelectedPath: "There is no path selected.",
noSelection: "There is no selection.",
noSelectionMod: "There is no selection to modify.",
noTextExporter: "The \"textExporter\" object does not exist or is not valid.",
noVectorMask: "Layer has no vector mask.",
noWorkPath: "Document has no work path.",
singleLayerOnly: "Only one layer should be selected.",
wrongLayerKind: "Selected layer is the wrong kind for the requested action."
}[id];
if (err) { log(src.callee, null, err); }

Go to http://russellbrown.com/scripts.html
download http://russellbrown.com/images/tips_downloads/Services_Installer_2.3.1.zip
extract the "Services_Installer_2.3.1.zip" do not install the extracted files instead find "Services_Installer_2.3.1.zxp" in the extracted files. This is also a zip file extract the files in it. You may need the reneme it to "Services_Installer_2.3.1.zip" first. In the extracted files find:
"Image Processor Pro.jsx" and "Image Processor Pro.xml" copy these to Photoshop's Presets\Scripts folder. The "Image Processor Pro: script written by Ross Huitt, [email protected] X use to contribute here but is feed up with Adobe has left. For Adobe does not fix the bugs that have been reported in Photoshop scripting support.
However he will continue to support the "Image Processor Pro" script for some time. Once installed you will find it in Photoshop's menu File>Automate>Image Processor Pro... . This script is very powerful and configurable and is a Photoshop Plug-in that Action support so not only can use use your actions in its processing you can record its used in actions to bypass its dialog. When the action's Image Processor Pro step is played the recorded dialog setting will be used and the script will bypass displaying its dialog.
The Script has all the options you need to save PNG files with the original document name with custom text added. You may be able to do what you want by just recording some simple actions and have the Image Processor Pro script include your actions as part of its processing.

Document / poster fold names and common characteristics?

Similar Messages

Maybe you are looking for