Document prints in reverse, what setting can I change to correct this?

Document prints in reverse, what setting can I change to correct this? Not a printer problem - documents print in correct order when using other programs. Using Acrobat X Pro on a Mac.

One more place to check. Open a document you'd like to print, then click the 'Printer...' button. Hit 'Yes' to the warning dialog box that comes up. For your specific printer, this might already be enabled. Change the drop-down menu that says 'Layout' to 'Paper Handling'. It could be that the Page Order preference has been changed here too. Just a thought!
-David

Similar Messages

What setting can i change to make mozilla stop thinking my netbook is a mobile phone

what setting can i change to make mozilla stop thinking my netbook is a mobile phone. i don't know if i get the correct browser/add ons, etc updates.

Hello,
The Reset Firefox feature can fix many issues by restoring Firefox to its factory default state while saving your essential information. 
'''Note''': ''This will cause you to lose any Extensions and some Preferences.''
*Open websites will not be saved in Firefox versions lower than 25.
To Reset Firefox do the following:
#Go to Firefox > Help > Troubleshooting Information.
#Click the "Reset Firefox" button.
#Firefox will close and reset. After Firefox is done, it will show a window with the information that is imported. Click Finish.
#Firefox will open with all factory defaults applied.
Further information can be found in the [[Reset Firefox – easily fix most problems]] article.
After Resetting, update to Firefox 27, [[Update Firefox to the latest version]]
Did this fix your problems? Please report back to us!
Thank you.

Rcv'ng message: This web site does not supply ownership information. Connection not encypted. Q: What setting can I change in Firefox to allow access?

Website: g01cdwascl002.ahe.pok.ibm.com
Owner: This web site does not supply ownership information.
Verified by: Not specified
Technical Details:
Connection not encrypted

You can set the pref browser.urlbar.trimURLs to false on the about:config page to see the http: protocol.
You can set the pref browser.urlbar.formatting.enabled to false on the about:config page to disable the highlighting of the domain and see the full URL more clearly.
*http://kb.mozillazine.org/about:config
A possible cause is security software (firewall) that blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
Remove all rules for Firefox from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox and the plugin-container process and the updater process.
See:
*https://support.mozilla.org/kb/Server+not+found
*https://support.mozilla.org/kb/Firewalls

If i have to close Firefox after attempting to load a page locks the machine up, what setting can i change where it will not automatically try to reload the page when i restard the browser?

Say i try to open a pdf link for example (although not limited to) and Firefox stops responding; if i close the browser and open it again, it will attempt to reload the same page that just locked it up. How do i turn this off? I get the "Well, this is embarrassing." error fairly often (after 'end task'-ing twice) :/
== This happened ==
A few times a week

What page crashes Firefox? On the "Well, this is embarrassing." page you could choose to restore all pages except for this "bad" one.
If I knew what page it is, maybe, I could help more.
You can also
Help->Report Broken Website...
Besides, you can also update Java.
If the problem is caused by JavaScript, you could install [https://addons.mozilla.org/en-US/firefox/addon/722 NoScript].

To change what pages are opened on each start-up/restart (whether a crash occurred or not), you can go to
Tools->Options->General->Homepage->You can change which page to use on start-up.

Opening new tab does not display my home page by default, what setting do I change to achieve this?

When selecting the open new tab option, in the past, the tab opened displaying my designated home page. It now opens displaying a YAHOO! search page. My home page settings have not changed and continue to display the correct address, selecting 'home' brings up the correct home page, at any time during browsing. Is there another location where this 'invalid' new tab address might be listed, and removed or reset ?

VC you are a genius! I solved my problem with your solution.
Thanks a lot!

Itunes 10 imports cd tracks in alphabetical order only. What setting do I change so it imports the same order as the cd?

itunes 10 imports cd tracks in alphabetical order only. What setting can I change so that it will import cd tracks in the same order as on the cd? Any help would be appreciated! I have this issue on only 1 of my 2 macbook pro computers, so I'm guessing it is a setting issue--but I don't know where to find it.

The apparent order of a burned CD may depend upon how you have iTunes display it - https://discussions.apple.com/message/17827921

I have set my printer to print in color. All my documents print in color, but I can't print the CD Case Inserts in color.

I have set my printer to print in color. All my documents print in color, but I can't print a CD Case Insert in color. Can you help?

That means it most likely a setting, Check the following. (steps written for windows 7)
Go to the control panel and find " Devices and printers" and doulble click it.
You should see the icon of your printer their, choose the one without fax in the name.
Right click it and choose " printer properties".
On the "general" Tab click on "preferences".
In the new screen on the "layout" tab cick "advanced"
In the new screen make sure "print in grayscale" is turned off and click ok severall times until all screens are gone.
Try printing again. And make sure in the print screen color printing is also checked.
Say "Thanks" by clicking the Kudos Star in the post that helped you.
Although I work for HP my posts and replies are my own
Please mark the post that solves your problem as "Accepted Solution"

Downloaded the app Top 100 Hits. Set the auto lock to never. Sound stops in 30 seconds, what can I do to correct this?

Downloaded the app Top 100 Hits. Set the auto lock to "never". Sounds stops in 30 seconds. What can I do to correct this. MaNUAL DOESN'T EXPLAIN.

I advise to reply to the one you want to reply to.
You have had good information here. I will not repeat that here.
I would like to add:
you have incompatible software: start in SafeMode, read Woodmeister and see if it is free of issues.
Akamai is crap software needed or not, Huawei the same.
It is very possible that the keygenerator you used for generating a key for some softwares has infected your mac.
The non-regular software with the false key(s) are not compatible probably or generate malware. Luckily you can not update them automatically because the keygenerator blocked the software for contacting the developer... I propose to consider getting rid of those softwares by really good uninstalling.
You have a beautiful mac, don't degenerate it with crapped software. There are alternatives for expensive software, for example Adobe Photoshop has a free alternative (with a less beautiful interface) in GIMP. And so on.
Lex

My mac has stopped connecting to the wireless printer. However both the mac and the printer indicate that they are connected. What can I do to correct this issue?

my mac has stopped connecting to the wireless printer. However both the mac and the printer indicate that they are connected. What can I do to correct this issue?

Maybe this???
Mac OS X: About the Reset Printing System feature ...
http://support.apple.com/kb/HT1341?viewlocale=en_US
10.5/10.6/10.7/10.8 instructions...
In System Preferences>Fax & Print, Right click or Control+click on the Printers list Sidebar, choose Reset Printing System.
if you hold option and click the "-" tab it resets the printing system.
http://www.macosxhints.com/article.php?story=20031215144430486
Safe Boot from the HD, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions.
Any devices that previously appeared in your Printer List and Fax List will need to be added again after resetting the printing system.
Resetting the printing system in Mac OS X 10.5.x+++
    1.    To use the Reset Printing System feature in Mac OS X 10.5.x, follow these steps:
    2.    Choose System Preferences from the Apple menu.
    3.    Choose Print & Fax from the View menu.
    4.    Control-click on list of printers on the left side of the window, then choose "Reset printing system" from the contextual menu. If you don't see a list of printers, Control-click on the text "Click + to add a printer or fax" and select "Reset printing system..."       As an alternative, if you currently have one or more printers listed, you can Option-click the "-" (Remove printer) button.
http://support.apple.com/kb/ht1341
Reboot.

SCCM 2012 what setting can be enabled so that no system force users to restart

SCCM 2012 what setting can be enabled in design rather then software distribution method and patching method which will help
to stop systems to restart even though not suppressed during in patching.

That's not possible. When during installation the restart is not suppressed, the system will restart. There is nothing from a ConfigMgr perspective that will prevent that from happening.
If there is a particular system that you want to stop from restarting you could try to prevent that by using the command shutdown -a.
My Blog: http://www.petervanderwoude.nl/
Follow me on twitter: pvanderwoude

My Apple ID and rescue email are reversed. How can I change them both at the same time

My Apple ID and rescue email are reversed. How can I change them both at the same time?

I'd already used this standard tool (exhaustively!), but for the problem encountered it operated in Catch 22 mode - you had to do two things but neither order was permitted. I did find an answer eventually, but am not sure what it was I did that solved it! Thanks, anyway.

HT4759 I have performed all troubleshoot suggestions to make my iphone and PC calendar update to each other via icloud.What else can I do to resolve this? This has been the most frustrationg aspect of changing to iphone and ipad. Thanks.

I have performed all troubleshoot suggestions to make my iphone and PC calendar update to each other via icloud.What else can I do to resolve this? This has been the most frustrationg aspect of changing to iphone and ipad. Thanks.

Welcome to the Apple Community.
    1.    First check that all your settings are correct, that calendar syncing is checked on all devices (system preferences > iCloud on a mac and settings > iCloud on a iPhone, iPad or iPod).
    2.    Make sure the calendars you are using are in your 'iCloud' account and not an 'On My Mac', 'On My Phone' or other non iCloud account (you can do this by clicking/tapping the calendar button in the top left corner of the application ), non iCloud calendars will not sync.
    3.    If you are sure that everything is set up correctly and your calendars are in the iCloud account, you might try unchecking calendar syncing in the iCloud settings, restarting your device and then re-enabling calendar syncing settings.

I have recently received a pdf file that, although previously opened, now shows totally blacked out? What can I do to correct this?

I have recently received a pdf file that, although previously opened, now shows totally blacked out? What can I do to correct this?

Hi rdfnra,
Please check the Page Display preferences (File > Preferences/Acrobat > Preferences) and make sure that Show Large Images is selected. If sounds as though this PDF may have been created from a scanned document, and this preference is disabled.
Please let us know how it goes.
Best,
Sara

I have to constantly keep restarting my computer for it to connect to the internet, what can be done to correct this problem?

I have to constantly keep restarting my computer for it to connect to the internet, what can be done to correct this problem?

Hi, this has worked for a few...
Make a New Location, Using network locations in Mac OS X ...
http://support.apple.com/kb/HT2712
10.7…
System Preferences>Network, top of window>Locations>Edit Locations, little plus icon, give it a name.
10.5.x/10.6.x/10.7.x instructions...
System Preferences>Network, click on the little gear at the bottom next to the + & - icons, (unlock lock first if locked), choose Set Service Order.
The interface that connects to the Internet should be dragged to the top of the list.
Instead of joining your Network from the list, click the WiFi icon at the top, and click join other network. Fill in everything as needed.
For 10.5/10.6, System Preferences>Network, unlock the lock if need be, highlight the Interface you use to connect to Internet, click on the advanced button, click on the DNS tab, click on the little plus icon, then add these numbers...
208.67.222.222
208.67.220.220
Click OK.
Also, turn off IPv6:
System Preferences » Network » AirPort » TCP/IP tab » Configure IPv6
Or whatever Interface you use.

I have over 2000 tunes in my ITunes library but I cannot use them because their original files cannot be found. What can I do to correct this ?

I have over 2000 tunes in my ITunes library but I cannot use most of them because their "Original files" cannot be found. What can I do to correct this ?

This happens if the file is no longer where iTunes expects to find it. Possible causes are that you or some third party tool has moved, renamed or deleted the file, or that the drive it lives on has had a change of drive letter. It is also possible that iTunes has changed from expecting the files to be in the pre-iTunes 9 layout to post-iTunes 9 layout, or vice-versa, and so is looking in slightly the wrong place.
Select a track with an exclamation mark, use Ctrl-I to get info, then cancel when asked to try to locate the track. Look on the summary tab for the location that iTunes thinks the file should be. Now take a look around your hard drive(s). Hopefully you can locate the track in question. If a section of your library has simply been moved, or a drive letter has changed, it should be possible to reverse the actions.
Alternatively, as long as you can find a location holding the missing files, then you should be able to use my FindTracks script to reconnect them to iTunes.
tt2

Document prints in reverse, what setting can I change to correct this?

Similar Messages

Maybe you are looking for