Document Problems when upgrading B1 from 2004 to 2005

When upgrading from B1 2004 to b1 2005 any documents over 2 pages cause B1 to crash - anyone found the same problem or a solution.

Hi clive
When you say it crashes, does it just close and no error. i've came across that problem when making complex documents. If you have made your document as an A4 document, check what the default printer is? Go to file->page setup .You'll see the printer it will print with and it's page size (letter,A4,etc). Make sure that is the same as the one you have set in the pld in the document.
Hope this helps

Similar Messages

The mis-mapping problem when upgrading OWB from 11.1 to 11.2.0.2.

Hi all,
Our OWB ETL program was developed initially on OWB 11.1 platform.
Then after upgrading it from 11.1 to 11.2.0.2, several mappings are mismatched in the deployment PL/SQL package as below:
CREATE OR REPLACE PACKAGE BODY "MAP_PRODUCT_LIFE_CRT" AS
CURSOR "T_T_PRODUCT_LIFE_c" IS
SELECT
/* T_PRODUCT_LIFE.T_T_PRODUCT_LIFE.INOUTGRP1 */
"T_T_PRODUCT_LIFE"."INS_TYPE" "ORGAN_ID$1",
"T_T_PRODUCT_LIFE"."START_DATE" "HOSPITAL_TYPE$1",
"T_T_PRODUCT_LIFE"."END_DATE" "UNIT_FLAG$1",
"T_T_PRODUCT_LIFE"."LIFE_RATE" "INS_TYPE",
You can see that the field mapping is wrong! We have about 100 mappings, but only some of them go wrong.
We have tried the Metadata Loader and Repository Assistant for the upgrading, but the results are the same.
We have released all OWB patches on 11.2.0.2, but the results are the same.
Please help on it!

Hi David,
Besides the mega patch 10185523, we also have applied other tens of patches, e.g. 10225308, 11671955, 11705023, 1768535, etc.
Now we find that the wrong field mapping just appears in the row-based part of the mapping package. So if the set-based mode works well for the mapping execution, no error will happen. That's why we just found the problems in several mappings.
And one thing is even worse. In the patched OWB 11.2.0.2 env., we tried creating totally new mapping. The result is the same: the wrong field mapping still appears in the row-based part of the mapping package.
So this problem seems not related to the upgrading.
Regards.

BPEL problem after upgrading Jdeveloper from 10.1.3.1.0 to 10.1.3.3.0

The problem concerns upgrading JDev from 10.1.3.1.0 to 10.1.3.3.0. At the moment I’ve got both versions installed side by side, and when I fire up version 10.1.3.1.0 everything is fine. However when I try and rebuild any of the existing BPEL’s in 10.1.3.3.0, I’m getting errors such as this:
Error:
[Error ORABPEL-10903]: failed to read wsdl
[Description]: in "bpel.xml", Failed to read wsdl.
Error happened when reading wsdl at "http://trips-services:8888/trips-services/TaxpayerAccountingService?WSDL", because "Failed to read WSDL from http://trips-services:8888/trips-services/TaxpayerAccountingService?WSDL: HTTP connection error code is 407".
Make sure wsdl exists at that URL and is valid.
[Potential fix]: If your site has a proxy server, then you may need to configure your BPEL Server, designer and browser with your proxy server configuration settings (see tech note on http://otn.oracle.com/bpel for instructions).
If I put the URL http://trips-services:8888/trips-services/TaxpayerAccountingService?WSDL into my browser, it retrieves the file correctly; my settings in Tools -> Settings -> Web Browser and Proxy are identical in both versions.
The same or similar errors occur in just about every BPEL I have looked at.
Does anybody have an idea what the problem might be here?

Hi Ken,
Could you tell us how you've defined your proxy exception list ?
I'm havind the same problems in a 10.1.3.3 environment where I'm not able to deploy a bpel process with an external webservice because of http 407-error.
Kind regards,
Nathalie

Why display hanging and software problem when upgraded to ios 8

Why display hanging and software problem when upgraded to ios 8

Hi Redhazel,
Thank you for using Apple Support Communities.
To troubleshoot this issue where you're experiencing a poor image quality with your iPhone's camera, please follow the troubleshooting below.
Camera isn't functioning or has undesired image quality
If the screen shows a closed lens or black image, force quit the Camera app.
If you do not see the Camera app on the Home screen, try searching for it in Spotlight. If the camera does not show up in the search, check to make sure that Restrictions are not turned on by tappingSettings > General > Restrictions.
Ensure the camera lens is clean and free from any obstructions. Use a microfiber polishing cloth to clean the lens.
Cases can interfere with the camera and the flash. Try gently cleaning the lens with a clean dry cloth or removing the case if you see image or color-quality issues with photos.
Try turning iPhone off and then back on.
Tap to focus the camera on the subject. The image may pulse or briefly go in and out of focus as it adjusts.
Try to remain steady while focusing:
Still images: Remain steady while taking the picture. If you move too far in any direction, the camera automatically refocuses to the center.
Note: If you take a picture with iPhone turned sideways, it is automatically saved in landscape orientation.
Video: Adjust focus before you begin recording. You can also tap to readjust focus while recording. Exiting the Camera application while recording will stop recording and will save the video to the Camera Roll.
Note: Video-recording features are not available on original iPhone or iPhone 3G.
If your iPhone has a front and rear camera, try switching between them to verify if the issue persists on both.
iPhone: Hardware troubleshooting
Cheers,
Alex H.

Are return codes from APIs different when upgrading DOT from 8.0.3 to 8.1.4/8.2.3 (7-mode only)

Customer is looking to upgrade from DOT 8.0.3 to 8.1.4/8.2.3 (7-mode). There are no real API changes between these upgrades other than additional functionality being added. Howver, are the return codes from APIs any different when upgrading DOT from 8.0.3 to 8.1.4/8.2.3 (7-mode only)? Any help on this to help confirm would be greatly appreciated. Many Thanks in advance. Luke

Thanks. I had the Portal 3.0.6/3.0.7/3.0.8 to Portal 3.0.9 upgrade scripts and instructions, but thought that was my last step. I hesitated on running the Portal Configuration Assistant. None of the instructions told me what to do at this point.
Anyways, it looks that by running the Portal Configuration Assitant at the end of the 1.0.2.2 9iAS install, it created a new repository for Portal 3.0.9 in my database. Since I gave it a different schema name, I now have two portal repositories. The old Portal 3.0.6 repository (jvac_portal30) and the new Portal 3.0.9 repository (j_portal30).
So, I assume I have to perform the upgrade scripts on the Portal 3.0.6 repository to get it to 3.0.9. Since we really did not have very much in the repository, we may just manually recreate everything in the new 3.0.9 repository. I have ssen several discussion threads about the upgrade and problems, so I am very leary to do it.
In regards to our J Server propblem, we left for lunch. Came back and rebooted several more times, double checked all our configuration files (made no changes), stopped and restarted Apache several more times, and then by some miracle everything started working.
null

EVDRE error "encountered problem when retrieving data from webserver"

Hi,
in a EVDRE we always get the error "encountered problem when retrieving data from webserver"
When analysing this further we noticed this is always generated when a base member is selected in the CV and the expansion on the row for this dimension is has one of the following expansion settings:
DEP
ALL
NOEXPAND
if we select SELF, the error disappears again and the EVDRE works fine again ... is this normal behavior?
there is no problem with application nor dimension.
D
solved it

Note that the keyword "ALL" does not include the member itself. This may cause some confusion, but as Harish implies, when you select a base member it finds no matches if your memberset is "ALL".
If you want to design a report to handle the user moving back and forth between base and non-base members in their CV, you either need to include SELF,ALL or SELF,DEP, or something similar....
OR you need to get a little fancier, and use EVPRO to look and see if the CV member is base -- evpro(app,member,"CALC") -- and then use some conditional logic in Excel to choose the correct expansion options. If Calc=N, use Self, otherwise use SELF,DEP or whatever you choose. This can be a bit tricky if you then want the user to be able to drill down in the report (especially if you want the workbook option to insert add'l rows on the expansion, rather than replace), but it's all possible.

Problems when updating WLC from Version 4.1 to 4.2

Hi,
we have a Problem when upgrading a WLC 4400.
When booting the device with the 4.2 Software, there are errors in some lines like "Starting Virtual AP Services: Parse error at line 244:
not well-formed (invalid token)"
and the config gets deleted.
What could be the problem? Is there a possibility to save the config and view it in clear text?
Thanks a lot and regards.

I see a similar message while booting a WLC-4402-25 running 5.0.148.0:
Starting Management Services:
Parse error at line 3
not well-formed (invalid token)
Web Server: ok
Looking at line 3 of the XML config file reveals:
Unless line 3 refers to a line 3 of a subset of the XML config file, I'm guessing the WLC code generating the XML config file is out of sync with the WLC code interpreting the XML config file during boot, or vice versa.
In my case the config is retained on the WLC.
Trond.

Problem when upgrading from Gnome 3.0 to 3.2 [SOLVED]

Hi,
I've been fighting for 2 days trying to fix this problem: after having upgraded from Gnome 3.0 to 3.2, I can't login anymore (I have this message telling me that something wrong happened and I should try again).
Here is what I tried:
- Removing ~/.config ~/.gconf and ~/.gnome2
- Connecting with a fresh new user
- Reinstalling gnome-shell
- pacman -S cogl
- http://justin.jetfive.com/gnome-32-arch … in-problem
But unfortunately it didn't help...
Here is the output of my ~/.xsessions-errors : http://pastebin.com/4dbMFDsY
[FYI I'm also running xfce4.8]
Any idea?
Thanks in advance!
Last edited by mirelsol (2011-10-20 18:07:53)

I had the same problem when I did the upgrade the very same day of the release. And the solution for me was to login using my battery. For some reason, GDM won't let me in if I'm plugged (I know it sounds crazy, but it works for me)
Best of luck

10.1.3.3 setup Java problem when upgrading from 10.1.3.2

Hi guys!
I have a problem with upgrade from 10.1.3.2 to 10.1.3.3 on Windows
The documentation is old what you can download! So I cannot find anything.
The Infrastructure Installation and Configuration Guide is for 10.1.3.2.1 and from april 2007
The Infrastructure Upgrade Guide goes from Siebel to OBI and from december 2006
The problem is
I have a fully functional 10.1.3.2 with all Java and everything.
When I start the server install I get the following error in a small window:
Java.lang.NoClassDefFoundError: run Exeption in thread "main"
Where should I look? Should I uninstall the previous version?
Thanx,
Istvan

I had the same problem when I did the upgrade the very same day of the release. And the solution for me was to login using my battery. For some reason, GDM won't let me in if I'm plugged (I know it sounds crazy, but it works for me)
Best of luck

Unmarshaller failed problem when upgrading weblogic8.1 domain to 9.2

Hi,I met a problem when I upgrade a 8.1 domain to 9.2 using upgrade tool. It seems the web.xml has error, and I also read some topic about this problem, but I didn't find there's any duplicate elements in this file, could anybody help me? Thank you! Here is the error and the xml file.
==================The error====================
Unable to load descriptor /tmp/appcgen_EPCISProject_v18.7.ear/EPCISWeb/WEB-INF/web.xml of module EPCISWeb. The error is weblogic.descriptor.DescriptorException: Unmarshaller failed
at weblogic.descriptor.internal.MarshallerFactory$1.createDescriptor(MarshallerFactory.java:147)
at weblogic.descriptor.DescriptorManager.createDescriptor(DescriptorManager.java:280)
at weblogic.descriptor.DescriptorManager.createDescriptor(DescriptorManager.java:248)
at weblogic.application.descriptor.AbstractDescriptorLoader2.getDescriptorBeanFromReader(AbstractDescriptorLoader2.java:749)
at weblogic.application.descriptor.AbstractDescriptorLoader2.createDescriptorBean(AbstractDescriptorLoader2.java:376)
at weblogic.application.descriptor.AbstractDescriptorLoader2.loadDescriptorBeanWithoutPlan(AbstractDescriptorLoader2.java:720)
at weblogic.application.descriptor.AbstractDescriptorLoader2.loadDescriptorBean(AbstractDescriptorLoader2.java:729)
at weblogic.servlet.internal.WebAppDescriptor.getWebAppBean(WebAppDescriptor.java:134)
at weblogic.application.compiler.WARModule.processLibraries(WARModule.java:286)
at weblogic.application.compiler.WARModule.merge(WARModule.java:303)
at weblogic.application.compiler.flow.MergeModuleFlow.compile(MergeModuleFlow.java:23)
at weblogic.application.compiler.FlowDriver$FlowStateChange.next(FlowDriver.java:69)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:26)
at weblogic.application.compiler.FlowDriver.nextState(FlowDriver.java:36)
at weblogic.application.compiler.FlowDriver$CompilerFlowDriver.compile(FlowDriver.java:96)
at weblogic.application.compiler.ReadOnlyEarMerger.merge(ReadOnlyEarMerger.java:41)
at weblogic.application.compiler.flow.AppMergerFlow.mergeInput(AppMergerFlow.java:94)
at weblogic.application.compiler.flow.AppMergerFlow.compile(AppMergerFlow.java:47)
at weblogic.application.compiler.FlowDriver$FlowStateChange.next(FlowDriver.java:69)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:26)
at weblogic.application.compiler.FlowDriver.nextState(FlowDriver.java:36)
at weblogic.application.compiler.FlowDriver$CompilerFlowDriver.compile(FlowDriver.java:96)
at weblogic.application.compiler.AppMerge.runBody(AppMerge.java:130)
at weblogic.utils.compiler.Tool.run(Tool.java:158)
at weblogic.utils.compiler.Tool.run(Tool.java:115)
at weblogic.application.compiler.AppMerge.merge(AppMerge.java:142)
at weblogic.deploy.api.internal.utils.AppMerger.merge(AppMerger.java:70)
at weblogic.deploy.api.internal.utils.AppMerger.getMergedApp(AppMerger.java:51)
at weblogic.deploy.api.model.internal.WebLogicDeployableObjectFactoryImpl.createDeployableObject(WebLogicDeployableObjectFactoryImpl.java:177)
at weblogic.deploy.api.model.internal.WebLogicDeployableObjectFactoryImpl.createLazyDeployableObject(WebLogicDeployableObjectFactoryImpl.java:150)
at weblogic.deploy.api.model.WebLogicDeployableObject.createLazyDeployableObject(WebLogicDeployableObject.java:730)
at weblogic.deploy.api.tools.Inspector.setup(Inspector.java:47)
Caused by: com.bea.xml.XmlException: weblogic.descriptor.BeanAlreadyExistsException: Bean already exists: "weblogic.j2ee.descriptor.TagLibBeanImpl@a6cbe1f4(//TagLibs[WEB-INF/c.tld])"
at com.bea.staxb.runtime.internal.util.ReflectionUtils.invokeMethod(ReflectionUtils.java:54)
at com.bea.staxb.runtime.internal.RuntimeBindingType$BeanRuntimeProperty.setValue(RuntimeBindingType.java:483)
at com.bea.staxb.runtime.internal.AttributeRuntimeBindingType$QNameRuntimeProperty.fillCollection(AttributeRuntimeBindingType.java:385)
at com.bea.staxb.runtime.internal.MultiIntermediary.getFinalValue(MultiIntermediary.java:52)
at com.bea.staxb.runtime.internal.AttributeRuntimeBindingType.getFinalObjectFromIntermediary(AttributeRuntimeBindingType.java:145)
at com.bea.staxb.runtime.internal.LiteralUnmarshalResult.unmarshalElementProperty(LiteralUnmarshalResult.java:159)
at com.bea.staxb.runtime.internal.LiteralUnmarshalResult.extractAndFillElementProp(LiteralUnmarshalResult.java:130)
at com.bea.staxb.runtime.internal.ByNameUnmarshaller.deserializeContents(ByNameUnmarshaller.java:51)
at com.bea.staxb.runtime.internal.AttributeUnmarshaller.unmarshalIntoIntermediary(AttributeUnmarshaller.java:47)
at com.bea.staxb.runtime.internal.UnmarshalResult.unmarshalBindingType(UnmarshalResult.java:184)
at com.bea.staxb.runtime.internal.UnmarshalResult.unmarshalDocument(UnmarshalResult.java:154)
at com.bea.staxb.runtime.internal.UnmarshallerImpl.unmarshal(UnmarshallerImpl.java:65)
at weblogic.descriptor.internal.MarshallerFactory$1.createDescriptor(MarshallerFactory.java:136)
at weblogic.descriptor.DescriptorManager.createDescriptor(DescriptorManager.java:280)
at weblogic.descriptor.DescriptorManager.createDescriptor(DescriptorManager.java:248)
at weblogic.application.descriptor.AbstractDescriptorLoader2.getDescriptorBeanFromReader(AbstractDescriptorLoader2.java:749)
at weblogic.application.descriptor.AbstractDescriptorLoader2.createDescriptorBean(AbstractDescriptorLoader2.java:376)
at weblogic.application.descriptor.AbstractDescriptorLoader2.loadDescriptorBeanWithoutPlan(AbstractDescriptorLoader2.java:720)
at weblogic.application.descriptor.AbstractDescriptorLoader2.loadDescriptorBean(AbstractDescriptorLoader2.java:729)
at weblogic.servlet.internal.WebAppDescriptor.getWebAppBean(WebAppDescriptor.java:134)
at weblogic.application.compiler.WARModule.processLibraries(WARModule.java:286)
at weblogic.application.compiler.WARModule.merge(WARModule.java:303)
at weblogic.application.compiler.flow.MergeModuleFlow.compile(MergeModuleFlow.java:23)
at weblogic.application.compiler.FlowDriver$FlowStateChange.next(FlowDriver.java:69)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:26)
at weblogic.application.compiler.FlowDriver.nextState(FlowDriver.java:36)
at weblogic.application.compiler.FlowDriver$CompilerFlowDriver.compile(FlowDriver.java:96)
at weblogic.application.compiler.ReadOnlyEarMerger.merge(ReadOnlyEarMerger.java:41)
at weblogic.application.compiler.flow.AppMergerFlow.mergeInput(AppMergerFlow.java:94)
at weblogic.application.compiler.flow.AppMergerFlow.compile(AppMergerFlow.java:47)
at weblogic.application.compiler.FlowDriver$FlowStateChange.next(FlowDriver.java:69)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:26)
Caused by: weblogic.descriptor.BeanAlreadyExistsException: Bean already exists: "weblogic.j2ee.descriptor.TagLibBeanImpl@a6cbe1f4(//TagLibs[WEB-INF/c.tld])"
at weblogic.descriptor.internal.ReferenceManager.registerBean(ReferenceManager.java:207)
at weblogic.j2ee.descriptor.JspConfigBeanImpl.setTagLibs(JspConfigBeanImpl.java:128)
at jrockit.reflect.VirtualNativeMethodInvoker.invoke(Ljava.lang.Object;[Ljava.lang.Object;)Ljava.lang.Object;(Unknown Source)
      at java.lang.reflect.Method.invoke(Ljava.lang.Object;[Ljava.lang.Object;I)Ljava.lang.Object;(Unknown Source)
      at com.bea.staxb.runtime.internal.util.ReflectionUtils.invokeMethod(ReflectionUtils.java:48)
      at com.bea.staxb.runtime.internal.RuntimeBindingType$BeanRuntimeProperty.setValue(RuntimeBindingType.java:483)
      at com.bea.staxb.runtime.internal.AttributeRuntimeBindingType$QNameRuntimeProperty.fillCollection(AttributeRuntimeBindingType.java:385)
      at com.bea.staxb.runtime.internal.MultiIntermediary.getFinalValue(MultiIntermediary.java:52)
      at com.bea.staxb.runtime.internal.AttributeRuntimeBindingType.getFinalObjectFromIntermediary(AttributeRuntimeBindingType.java:145)
      at com.bea.staxb.runtime.internal.LiteralUnmarshalResult.unmarshalElementProperty(LiteralUnmarshalResult.java:159)
      at com.bea.staxb.runtime.internal.LiteralUnmarshalResult.extractAndFillElementProp(LiteralUnmarshalResult.java:130)
      at com.bea.staxb.runtime.internal.ByNameUnmarshaller.deserializeContents(ByNameUnmarshaller.java:51)
      at com.bea.staxb.runtime.internal.AttributeUnmarshaller.unmarshalIntoIntermediary(AttributeUnmarshaller.java:47)
      at com.bea.staxb.runtime.internal.UnmarshalResult.unmarshalBindingType(UnmarshalResult.java:184)
      at com.bea.staxb.runtime.internal.UnmarshalResult.unmarshalDocument(UnmarshalResult.java:154)
      at com.bea.staxb.runtime.internal.UnmarshallerImpl.unmarshal(UnmarshallerImpl.java:65)
      at weblogic.descriptor.internal.MarshallerFactory$1.createDescriptor(MarshallerFactory.java:136)
      at weblogic.descriptor.DescriptorManager.createDescriptor(DescriptorManager.java:280)
      at weblogic.descriptor.DescriptorManager.createDescriptor(DescriptorManager.java:248)
      at weblogic.application.descriptor.AbstractDescriptorLoader2.getDescriptorBeanFromReader(AbstractDescriptorLoader2.java:749)
      at weblogic.application.descriptor.AbstractDescriptorLoader2.createDescriptorBean(AbstractDescriptorLoader2.java:376)
      at weblogic.application.descriptor.AbstractDescriptorLoader2.loadDescriptorBeanWithoutPlan(AbstractDescriptorLoader2.java:720)
      at weblogic.application.descriptor.AbstractDescriptorLoader2.loadDescriptorBean(AbstractDescriptorLoader2.java:729)
      at weblogic.servlet.internal.WebAppDescriptor.getWebAppBean(WebAppDescriptor.java:134)
      at weblogic.application.compiler.WARModule.processLibraries(WARModule.java:286)
      at weblogic.application.compiler.WARModule.merge(WARModule.java:303)
      at weblogic.application.compiler.flow.MergeModuleFlow.compile(MergeModuleFlow.java:23)
      ... 2 more
An unexpected error specifying configuration information for the application 'EPCISProject_v18.7' due to weblogic.management.provider.UpdateException: Exception in AppMerge flows' progression.
=====================The web.xml=====================
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE web-app PUBLIC "-//Sun Microsystems, Inc.//DTD Web Application 2.3//EN" "http://java.sun.com/dtd/web-app_2_3.dtd">
<web-app id="WebApp">
<display-name>OnJavaCom Sample</display-name>

<context-param>
    <param-name>contextConfigLocation</param-name>
    <param-value>
         /WEB-INF/applicationContext.xml
          /WEB-INF/securityContext.xml
          /WEB-INF/jobContext.xml
          /WEB-INF/epcContext.xml
          /WEB-INF/naiContext.xml
          /WEB-INF/reportContext.xml
          /WEB-INF/tablemaintenanceContext.xml
          /WEB-INF/QIContext.xml
          /WEB-INF/feedbackContext.xml
          /WEB-INF/loginContext.xml
    </param-value>
</context-param>
     <context-param>
          <param-name>log4jConfigLocation</param-name>
          <param-value>/WEB-INF/log4j.properties</param-value>
     </context-param>
     
     <listener>
          <listener-class>org.springframework.web.context.ContextLoaderListener</listener-class>
     </listener>
     <listener>
          <listener-class>com.bea.wlw.runtime.core.servlet.WebappContextListener</listener-class>
     </listener>
     <listener>
          <listener-class>org.springframework.web.util.Log4jConfigListener</listener-class>
     </listener>
     <servlet>
          <servlet-name>action</servlet-name>
          <servlet-class>org.apache.struts.action.ActionServlet</servlet-class>
          <init-param>
               <param-name>config</param-name>
               <param-value>/WEB-INF/struts-config.xml</param-value>
          </init-param>
          <init-param>
               <param-name>config/main</param-name>
               <param-value>/WEB-INF/struts-config-main.xml</param-value>
          </init-param>
          <init-param>
               <param-name>storage</param-name>
               <param-value>de.laures.cewolf.storage.TransientSessionStorage</param-value>
          </init-param>
          
          <init-param>
               <param-name>overliburl</param-name>
               <param-value>etc/overlib.js</param-value>
          </init-param>
          <init-param>
               <param-name>debug</param-name>
               <param-value>true</param-value>
          </init-param>
          <init-param>
               <param-name>detail</param-name>
               <param-value>2</param-value>
          </init-param>
          <init-param>
               <param-name>validate</param-name>
               <param-value>true</param-value>
          </init-param>
          <load-on-startup>2</load-on-startup>
     </servlet>
     <servlet-mapping>
          <servlet-name>action</servlet-name>
          <url-pattern>*.do</url-pattern>
     </servlet-mapping>
     <welcome-file-list>
          <welcome-file>index.html</welcome-file>
          <welcome-file>index.htm</welcome-file>
          <welcome-file>index.jsp</welcome-file>
          <welcome-file>default.html</welcome-file>
          <welcome-file>default.htm</welcome-file>
          <welcome-file>default.jsp</welcome-file>
     </welcome-file-list>
     <taglib>
          <taglib-uri>/WEB-INF/struts-bean-el.tld</taglib-uri>
          <taglib-location>/WEB-INF/struts-bean.tld</taglib-location>
     </taglib>
     <taglib>
          <taglib-uri>/WEB-INF/struts-html-el.tld</taglib-uri>
          <taglib-location>/WEB-INF/struts-html.tld</taglib-location>
     </taglib>
     <taglib>
          <taglib-uri>/WEB-INF/struts-logic-el.tld</taglib-uri>
          <taglib-location>/WEB-INF/struts-logic.tld</taglib-location>
     </taglib>
     <taglib>
          <taglib-uri>/WEB-INF/struts-nested.tld</taglib-uri>
          <taglib-location>/WEB-INF/struts-nested.tld</taglib-location>
     </taglib>
     <taglib>
          <taglib-uri>/WEB-INF/struts-template.tld</taglib-uri>
          <taglib-location>/WEB-INF/struts-template.tld</taglib-location>
     </taglib>
     <taglib>
          <taglib-uri>/WEB-INF/struts-tiles.tld</taglib-uri>
          <taglib-location>/WEB-INF/struts-tiles.tld</taglib-location>
     </taglib>
     <taglib>
          <taglib-uri>/WEB-INF/c.tld</taglib-uri>
          <taglib-location>/WEB-INF/c.tld</taglib-location>
     </taglib>
     <taglib>
          <taglib-uri>/WEB-INF/cewolf-1.1.tld</taglib-uri>
          <taglib-location>/WEB-INF/cewolf-1.1.tld</taglib-location>
     </taglib>
     <taglib>
          <taglib-uri>/WEB-INF/c.tld</taglib-uri>
          <taglib-location>/WEB-INF/cewolf.tld</taglib-location>
     </taglib>

     <taglib>
          <taglib-uri>/WEB-INF/struts-layout.tld</taglib-uri>
          <taglib-location>/WEB-INF/struts-layout.tld</taglib-location>
     </taglib>
     <filter>
          <filter-name>Acegi Filter Chain Proxy</filter-name>
          <filter-class>org.acegisecurity.util.FilterToBeanProxy</filter-class>
          <init-param>
               <param-name>targetClass</param-name>
               <param-value>org.acegisecurity.util.FilterChainProxy</param-value>
          </init-param>
     </filter>
     <filter-mapping>
          <filter-name>Acegi Filter Chain Proxy</filter-name>
          <url-pattern>/*</url-pattern>
     </filter-mapping>
     <listener>
          <listener-class>org.acegisecurity.ui.session.HttpSessionEventPublisher</listener-class>
     </listener>
     <session-timeout>60</session-timeout>
     <servlet>
          <servlet-name>NAI</servlet-name>
          <servlet-class>com.epc.common.servlet.EPCISServlet</servlet-class>
     </servlet>
     <servlet-mapping>
          <servlet-name>NAI</servlet-name>
          <url-pattern>/NAI</url-pattern>
     </servlet-mapping>
     <servlet>
          <servlet-name>MGB</servlet-name>
          <servlet-class>com.epc.common.servlet.MGBServlet</servlet-class>
     </servlet>
     <servlet-mapping>
          <servlet-name>MGB</servlet-name>
          <url-pattern>/MGB</url-pattern>
     </servlet-mapping>
     <servlet>
          <servlet-name>CewolfServlet</servlet-name>
          <servlet-class>de.laures.cewolf.CewolfRenderer</servlet-class>
     </servlet>
     <servlet-mapping>
          <servlet-name>CewolfServlet</servlet-name>
          <url-pattern>/main/cewolf/*</url-pattern>
     </servlet-mapping>
</web-app>

I am dealing with the same issue. I am trying to install Business Objects Enterprise 11.
####<Aug 2, 2007 12:17:18 PM CDT> <Error> <Console> <imagenow> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <weblogic> <> <> <1186075038254> <BEA-240003> <Console encountered the following error weblogic.application.ModuleException: [HTTP:101064][WebAppModule(Report Server Admin:admin)] Error parsing descriptor in Web appplication "C:\inreports\BusinessObjects Enterprise XI\BusinessObjects Enterprise 11\java\applications\admin"
weblogic.application.ModuleException: Unmarshaller failed
     at weblogic.servlet.internal.WebAppModule.loadDescriptor(WebAppModule.java:781)
     at weblogic.servlet.internal.WebAppModule.prepare(WebAppModule.java:272)
     at weblogic.application.internal.flow.ScopedModuleDriver.prepare(ScopedModuleDriver.java:176)
     at weblogic.application.internal.flow.ModuleListenerInvoker.prepare(ModuleListenerInvoker.java:93)
     at weblogic.application.internal.flow.DeploymentCallbackFlow$1.next(DeploymentCallbackFlow.java:360)
     at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:26)
     at weblogic.application.internal.flow.DeploymentCallbackFlow.prepare(DeploymentCallbackFlow.java:56)
     at weblogic.application.internal.flow.DeploymentCallbackFlow.prepare(DeploymentCallbackFlow.java:46)
     at weblogic.application.internal.BaseDeployment$1.next(BaseDeployment.java:615)
     at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:26)
     at weblogic.application.internal.BaseDeployment.prepare(BaseDeployment.java:191)
     at weblogic.application.internal.DeploymentStateChecker.prepare(DeploymentStateChecker.java:147)
     at weblogic.deploy.internal.targetserver.AppContainerInvoker.prepare(AppContainerInvoker.java:61)
     at weblogic.deploy.internal.targetserver.operations.ActivateOperation.createAndPrepareContainer(ActivateOperation.java:189)
     at weblogic.deploy.internal.targetserver.operations.ActivateOperation.doPrepare(ActivateOperation.java:87)
     at weblogic.deploy.internal.targetserver.operations.AbstractOperation.prepare(AbstractOperation.java:217)
     at weblogic.deploy.internal.targetserver.DeploymentManager.handleDeploymentPrepare(DeploymentManager.java:718)
     at weblogic.deploy.internal.targetserver.DeploymentManager.prepareDeploymentList(DeploymentManager.java:1185)
     at weblogic.deploy.internal.targetserver.DeploymentManager.handlePrepare(DeploymentManager.java:247)
     at weblogic.deploy.internal.targetserver.DeploymentServiceDispatcher.prepare(DeploymentServiceDispatcher.java:157)
     at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer.doPrepareCallback(DeploymentReceiverCallbackDeliverer.java:157)
     at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer.access$000(DeploymentReceiverCallbackDeliverer.java:12)
     at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer$1.run(DeploymentReceiverCallbackDeliverer.java:45)
     at weblogic.work.ServerWorkManagerImpl$WorkAdapterImpl.run(ServerWorkManagerImpl.java:518)
     at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
     at weblogic.work.ExecuteThread.run(ExecuteThread.java:181)
Caused by: weblogic.descriptor.BeanAlreadyExistsException: Bean already exists: "weblogic.j2ee.descriptor.ServletMappingBeanImpl@e30790b(/ServletMappings[weblogic.descriptor.internal.CompoundKey@ea2c6ca])"
     at weblogic.descriptor.internal.ReferenceManager.registerBean(ReferenceManager.java:207)
     at weblogic.j2ee.descriptor.WebAppBeanImpl.setServletMappings(WebAppBeanImpl.java:1227)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:585)
     at com.bea.staxb.runtime.internal.util.ReflectionUtils.invokeMethod(ReflectionUtils.java:48)
     at com.bea.staxb.runtime.internal.RuntimeBindingType$BeanRuntimeProperty.setValue(RuntimeBindingType.java:483)
     at com.bea.staxb.runtime.internal.AttributeRuntimeBindingType$QNameRuntimeProperty.fillCollection(AttributeRuntimeBindingType.java:385)
     at com.bea.staxb.runtime.internal.MultiIntermediary.getFinalValue(MultiIntermediary.java:52)
     at com.bea.staxb.runtime.internal.AttributeRuntimeBindingType.getFinalObjectFromIntermediary(AttributeRuntimeBindingType.java:145)
     at com.bea.staxb.runtime.internal.UnmarshalResult.unmarshalBindingType(UnmarshalResult.java:185)
     at com.bea.staxb.runtime.internal.UnmarshalResult.unmarshalDocument(UnmarshalResult.java:154)
     at com.bea.staxb.runtime.internal.UnmarshallerImpl.unmarshal(UnmarshallerImpl.java:65)
     at weblogic.descriptor.internal.MarshallerFactory$1.createDescriptor(MarshallerFactory.java:136)
     at weblogic.descriptor.DescriptorManager.createDescriptor(DescriptorManager.java:280)
     at weblogic.descriptor.DescriptorManager.createDescriptor(DescriptorManager.java:248)
     at weblogic.application.descriptor.AbstractDescriptorLoader2.getDescriptorBeanFromReader(AbstractDescriptorLoader2.java:749)
     at weblogic.application.descriptor.AbstractDescriptorLoader2.createDescriptorBean(AbstractDescriptorLoader2.java:376)
     at weblogic.application.descriptor.AbstractDescriptorLoader2.loadDescriptorBeanWithoutPlan(AbstractDescriptorLoader2.java:720)
     at weblogic.application.descriptor.AbstractDescriptorLoader2.loadDescriptorBean(AbstractDescriptorLoader2.java:729)
     at weblogic.servlet.internal.WebAppDescriptor.getWebAppBean(WebAppDescriptor.java:134)
     at weblogic.servlet.internal.WebAppModule.loadDescriptor(WebAppModule.java:775)
     at weblogic.servlet.internal.WebAppModule.prepare(WebAppModule.java:272)
     at weblogic.application.internal.flow.ScopedModuleDriver.prepare(ScopedModuleDriver.java:176)
     at weblogic.application.internal.flow.ModuleListenerInvoker.prepare(ModuleListenerInvoker.java:93)
     at weblogic.application.internal.flow.DeploymentCallbackFlow$1.next(DeploymentCallbackFlow.java:360)
     at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:26)
     at weblogic.application.internal.flow.DeploymentCallbackFlow.prepare(DeploymentCallbackFlow.java:56)
     at weblogic.application.internal.flow.DeploymentCallbackFlow.prepare(DeploymentCallbackFlow.java:46)
weblogic.application.ModuleException: Unmarshaller failed
     at weblogic.servlet.internal.WebAppModule.loadDescriptor(WebAppModule.java:781)
     at weblogic.servlet.internal.WebAppModule.prepare(WebAppModule.java:272)
     at weblogic.application.internal.flow.ScopedModuleDriver.prepare(ScopedModuleDriver.java:176)
     at weblogic.application.internal.flow.ModuleListenerInvoker.prepare(ModuleListenerInvoker.java:93)
     at weblogic.application.internal.flow.DeploymentCallbackFlow$1.next(DeploymentCallbackFlow.java:360)
     at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:26)
     at weblogic.application.internal.flow.DeploymentCallbackFlow.prepare(DeploymentCallbackFlow.java:56)
     at weblogic.application.internal.flow.DeploymentCallbackFlow.prepare(DeploymentCallbackFlow.java:46)
     at weblogic.application.internal.BaseDeployment$1.next(BaseDeployment.java:615)
     at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:26)
     at weblogic.application.internal.BaseDeployment.prepare(BaseDeployment.java:191)
     at weblogic.application.internal.DeploymentStateChecker.prepare(DeploymentStateChecker.java:147)
     at weblogic.deploy.internal.targetserver.AppContainerInvoker.prepare(AppContainerInvoker.java:61)
     at weblogic.deploy.internal.targetserver.operations.ActivateOperation.createAndPrepareContainer(ActivateOperation.java:189)
     at weblogic.deploy.internal.targetserver.operations.ActivateOperation.doPrepare(ActivateOperation.java:87)
     at weblogic.deploy.internal.targetserver.operations.AbstractOperation.prepare(AbstractOperation.java:217)
     at weblogic.deploy.internal.targetserver.DeploymentManager.handleDeploymentPrepare(DeploymentManager.java:718)
     at weblogic.deploy.internal.targetserver.DeploymentManager.prepareDeploymentList(DeploymentManager.java:1185)
     at weblogic.deploy.internal.targetserver.DeploymentManager.handlePrepare(DeploymentManager.java:247)
     at weblogic.deploy.internal.targetserver.DeploymentServiceDispatcher.prepare(DeploymentServiceDispatcher.java:157)
     at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer.doPrepareCallback(DeploymentReceiverCallbackDeliverer.java:157)
     at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer.access$000(DeploymentReceiverCallbackDeliverer.java:12)
     at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer$1.run(DeploymentReceiverCallbackDeliverer.java:45)
     at weblogic.work.ServerWorkManagerImpl$WorkAdapterImpl.run(ServerWorkManagerImpl.java:518)
     at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
     at weblogic.work.ExecuteThread.run(ExecuteThread.java:181)
Caused by: weblogic.descriptor.BeanAlreadyExistsException: Bean already exists: "weblogic.j2ee.descriptor.ServletMappingBeanImpl@e30790b(/ServletMappings[weblogic.descriptor.internal.CompoundKey@ea2c6ca])"
     at weblogic.descriptor.internal.ReferenceManager.registerBean(ReferenceManager.java:207)
     at weblogic.j2ee.descriptor.WebAppBeanImpl.setServletMappings(WebAppBeanImpl.java:1227)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:585)
     at com.bea.staxb.runtime.internal.util.ReflectionUtils.invokeMethod(ReflectionUtils.java:48)
     at com.bea.staxb.runtime.internal.RuntimeBindingType$BeanRuntimeProperty.setValue(RuntimeBindingType.java:483)
     at com.bea.staxb.runtime.internal.AttributeRuntimeBindingType$QNameRuntimeProperty.fillCollection(AttributeRuntimeBindingType.java:385)
     at com.bea.staxb.runtime.internal.MultiIntermediary.getFinalValue(MultiIntermediary.java:52)
     at com.bea.staxb.runtime.internal.AttributeRuntimeBindingType.getFinalObjectFromIntermediary(AttributeRuntimeBindingType.java:145)
     at com.bea.staxb.runtime.internal.UnmarshalResult.unmarshalBindingType(UnmarshalResult.java:185)
     at com.bea.staxb.runtime.internal.UnmarshalResult.unmarshalDocument(UnmarshalResult.java:154)
     at com.bea.staxb.runtime.internal.UnmarshallerImpl.unmarshal(UnmarshallerImpl.java:65)
     at weblogic.descriptor.internal.MarshallerFactory$1.createDescriptor(MarshallerFactory.java:136)
     at weblogic.descriptor.DescriptorManager.createDescriptor(DescriptorManager.java:280)
     at weblogic.descriptor.DescriptorManager.createDescriptor(DescriptorManager.java:248)
     at weblogic.application.descriptor.AbstractDescriptorLoader2.getDescriptorBeanFromReader(AbstractDescriptorLoader2.java:749)
     at weblogic.application.descriptor.AbstractDescriptorLoader2.createDescriptorBean(AbstractDescriptorLoader2.java:376)
     at weblogic.application.descriptor.AbstractDescriptorLoader2.loadDescriptorBeanWithoutPlan(AbstractDescriptorLoader2.java:720)
     at weblogic.application.descriptor.AbstractDescriptorLoader2.loadDescriptorBean(AbstractDescriptorLoader2.java:729)
     at weblogic.servlet.internal.WebAppDescriptor.getWebAppBean(WebAppDescriptor.java:134)
     at weblogic.servlet.internal.WebAppModule.loadDescriptor(WebAppModule.java:775)
     at weblogic.servlet.internal.WebAppModule.prepare(WebAppModule.java:272)
     at weblogic.application.internal.flow.ScopedModuleDriver.prepare(ScopedModuleDriver.java:176)
     at weblogic.application.internal.flow.ModuleListenerInvoker.prepare(ModuleListenerInvoker.java:93)
     at weblogic.application.internal.flow.DeploymentCallbackFlow$1.next(DeploymentCallbackFlow.java:360)
     at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:26)
     at weblogic.application.internal.flow.DeploymentCallbackFlow.prepare(DeploymentCallbackFlow.java:56)
     at weblogic.application.internal.flow.DeploymentCallbackFlow.prepare(DeploymentCallbackFlow.java:46)
     at weblogic.servlet.internal.WebAppModule.createModuleException(WebAppModule.java:980)
     at weblogic.servlet.internal.WebAppModule.loadDescriptor(WebAppModule.java:799)
     ... 25 more
Caused by: weblogic.descriptor.BeanAlreadyExistsException: Bean already exists: "weblogic.j2ee.descriptor.ServletMappingBeanImpl@e30790b(/ServletMappings[weblogic.descriptor.internal.CompoundKey@ea2c6ca])"
     at weblogic.descriptor.internal.ReferenceManager.registerBean(ReferenceManager.java:207)
     at weblogic.j2ee.descriptor.WebAppBeanImpl.setServletMappings(WebAppBeanImpl.java:1227)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:585)
     at com.bea.staxb.runtime.internal.util.ReflectionUtils.invokeMethod(ReflectionUtils.java:48)
     at com.bea.staxb.runtime.internal.RuntimeBindingType$BeanRuntimeProperty.setValue(RuntimeBindingType.java:483)
     at com.bea.staxb.runtime.internal.AttributeRuntimeBindingType$QNameRuntimeProperty.fillCollection(AttributeRuntimeBindingType.java:385)
     at com.bea.staxb.runtime.internal.MultiIntermediary.getFinalValue(MultiIntermediary.java:52)
     at com.bea.staxb.runtime.internal.AttributeRuntimeBindingType.getFinalObjectFromIntermediary(AttributeRuntimeBindingType.java:145)
     at com.bea.staxb.runtime.internal.UnmarshalResult.unmarshalBindingType(UnmarshalResult.java:185)
     at com.bea.staxb.runtime.internal.UnmarshalResult.unmarshalDocument(UnmarshalResult.java:154)
     at com.bea.staxb.runtime.internal.UnmarshallerImpl.unmarshal(UnmarshallerImpl.java:65)
     at weblogic.descriptor.internal.MarshallerFactory$1.createDescriptor(MarshallerFactory.java:136)
     at weblogic.descriptor.DescriptorManager.createDescriptor(DescriptorManager.java:280)
     at weblogic.descriptor.DescriptorManager.createDescriptor(DescriptorManager.java:248)
     at weblogic.application.descriptor.AbstractDescriptorLoader2.getDescriptorBeanFromReader(AbstractDescriptorLoader2.java:749)
     at weblogic.application.descriptor.AbstractDescriptorLoader2.createDescriptorBean(AbstractDescriptorLoader2.java:376)
     at weblogic.application.descriptor.AbstractDescriptorLoader2.loadDescriptorBeanWithoutPlan(AbstractDescriptorLoader2.java:720)
     at weblogic.application.descriptor.AbstractDescriptorLoader2.loadDescriptorBean(AbstractDescriptorLoader2.java:729)
     at weblogic.servlet.internal.WebAppDescriptor.getWebAppBean(WebAppDescriptor.java:134)
     at weblogic.servlet.internal.WebAppModule.loadDescriptor(WebAppModule.java:775)
     at weblogic.servlet.internal.WebAppModule.prepare(WebAppModule.java:272)
     at weblogic.application.internal.flow.ScopedModuleDriver.prepare(ScopedModuleDriver.java:176)
     at weblogic.application.internal.flow.ModuleListenerInvoker.prepare(ModuleListenerInvoker.java:93)
     at weblogic.application.internal.flow.DeploymentCallbackFlow$1.next(DeploymentCallbackFlow.java:360)
     at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:26)
     at weblogic.application.internal.flow.DeploymentCallbackFlow.prepare(DeploymentCallbackFlow.java:56)
     at weblogic.application.internal.flow.DeploymentCallbackFlow.prepare(DeploymentCallbackFlow.java:46)
     WEB.XML FILE
<!DOCTYPE web-app
PUBLIC "-//Sun Microsystems, Inc.//DTD Web Application 2.2//EN"
"http://java.sun.com/j2ee/dtds/web-app_2_2.dtd">
<web-app>

<display-name>Admin Web Examples</display-name>
<description>
Crystal Enterprise admin web examples.
</description>







<context-param>
     <param-name> CMS </param-name>
<param-value> aschmidt </param-value>
</context-param>



<context-param>
<param-name>crystal_image_uri</param-name>
<param-value>../crystalreportviewers11</param-value>
</context-param>



<servlet>
<servlet-name> objectViewer </servlet-name>
<description>
Object Viewer
</description>
<servlet-class> com.crystaldecisions.examples.ObjectViewerServlet</servlet-class>
<load-on-startup>1</load-on-startup>
</servlet>
<servlet>
<servlet-name>manageAccounts</servlet-name>
<description>
Manage User/Group Accounts
</description>
<servlet-class>com.crystaldecisions.examples.ManageAccountsServlet</servlet-class>
<load-on-startup>1</load-on-startup>
</servlet>
<servlet>
<servlet-name>adminLDAP</servlet-name>
<description>
Administrate LDAP plugin
</description>
<servlet-class>com.crystaldecisions.examples.AdminLDAPServlet</servlet-class>
<load-on-startup>1</load-on-startup>
</servlet>
<servlet>
<servlet-name>logon</servlet-name>
<description>
Logon to the CMS
</description>
<servlet-class>com.crystaldecisions.examples.LogonServlet</servlet-class>
<load-on-startup>1</load-on-startup>
</servlet>
<servlet>
<servlet-name>deleteInstance</servlet-name>
<description>
Delete instances
</description>
<servlet-class>com.crystaldecisions.examples.DeleteInstanceServlet</servlet-class>
<load-on-startup>1</load-on-startup>
</servlet>
<servlet>
<servlet-name>setReportLogons</servlet-name>
<description>
Set DB Logons
</description>
<servlet-class>com.crystaldecisions.examples.SetReportLogonsServlet</servlet-class>
<load-on-startup>1</load-on-startup>
</servlet>
<servlet>
<servlet-name>setReportSchedule</servlet-name>
<description>
Set DB schedule settings
</description>
<servlet-class>com.crystaldecisions.examples.SetReportScheduleServlet</servlet-class>
<load-on-startup>1</load-on-startup>
</servlet>
<servlet>
<servlet-name>serverAdmin</servlet-name>
<description>
Administrate servers.
</description>
<servlet-class>com.crystaldecisions.examples.ServerAdminServlet</servlet-class>
<load-on-startup>1</load-on-startup>
</servlet>
<servlet>
<servlet-name>viewreport</servlet-name>
<description>
View report
</description>
<servlet-class>com.crystaldecisions.examples.ViewReportServlet</servlet-class>
<load-on-startup>1</load-on-startup>
</servlet>
<servlet>
<servlet-name>viewrpt</servlet-name>
<description>
Reportsource bridge used to support Java applet viewer and ActiveX viewer.
</description>
<servlet-class>com.businessobjects.crystalreports.reportsourcebridge.ReportSourceBridge</servlet-class>
<load-on-startup>1</load-on-startup>
</servlet>
<servlet>
<servlet-name>localizeURL</servlet-name>
<description>
Used to redirect to the localized html page
</description>
<servlet-class>com.crystaldecisions.examples.LocalizeURLServlet</servlet-class>
<load-on-startup>1</load-on-startup>
</servlet>
<servlet>
     <servlet-name>setRightsTablePref</servlet-name>
<description>
Used to set Object Rights Table's viewing preferences
</description>
<servlet-class>com.crystaldecisions.examples.SetRightsTablePrefServlet</servlet-class>
<load-on-startup>1</load-on-startup>
</servlet>
<servlet-mapping>
<servlet-name>manageAccounts</servlet-name>
<url-pattern>/changeAliasesPasswords/manageAccounts</url-pattern>
</servlet-mapping>
<servlet-mapping>
<servlet-name>adminLDAP</servlet-name>
<url-pattern>/adminLDAP/adminLDAP</url-pattern>
</servlet-mapping>
<servlet-mapping>
<servlet-name>setReportLogons</servlet-name>
<url-pattern>/changeDBLogon/setReportLogons</url-pattern>
</servlet-mapping>
<servlet-mapping>
<servlet-name>serverAdmin</servlet-name>
<url-pattern>/onePageServerAdministration/serverAdmin</url-pattern>
</servlet-mapping>
<servlet-mapping>
<servlet-name>logon</servlet-name>
<url-pattern>/changeAliasesPasswords/logon</url-pattern>
</servlet-mapping>
<servlet-mapping>
<servlet-name>logon</servlet-name>
<url-pattern>/adminLDAP/logon</url-pattern>
</servlet-mapping>
<servlet-mapping>
<servlet-name>logon</servlet-name>
<url-pattern>/instancesByStatus/logon</url-pattern>
</servlet-mapping>
<servlet-mapping>
<servlet-name>deleteInstance</servlet-name>
<url-pattern>/instancesByStatus/deleteInstance</url-pattern>
</servlet-mapping>
<servlet-mapping>
<servlet-name>objectViewer</servlet-name>
<url-pattern>/instancesByStatus/objectViewer</url-pattern>
</servlet-mapping>
<servlet-mapping>
<servlet-name>viewreport</servlet-name>
<url-pattern>/instancesByStatus/viewreport</url-pattern>
</servlet-mapping>
<servlet-mapping>
<servlet-name>viewrpt</servlet-name>
<url-pattern>/viewrpt.cwr</url-pattern>
</servlet-mapping>
<servlet-mapping>
<servlet-name>logon</servlet-name>
<url-pattern>/instancesByStatus/logon</url-pattern>
</servlet-mapping>
<servlet-mapping>
<servlet-name>logon</servlet-name>
<url-pattern>/changeDBLogon/logon</url-pattern>
</servlet-mapping>
<servlet-mapping>
<servlet-name>setReportLogons</servlet-name>
<url-pattern>/changeDBLogon/setReportLogons</url-pattern>
</servlet-mapping>
<servlet-mapping>
<servlet-name>logon</servlet-name>
<url-pattern>/onePageServerAdministration/logon</url-pattern>
</servlet-mapping>
<servlet-mapping>
<servlet-name>viewreport</servlet-name>
<url-pattern>/instancesByStatus/viewreport</url-pattern>
</servlet-mapping>
<servlet-mapping>
<servlet-name>deleteInstance</servlet-name>
<url-pattern>/instancesByStatus/deleteInstance</url-pattern>
</servlet-mapping>
<servlet-mapping>
<servlet-name>setReportLogons</servlet-name>
<url-pattern>/changeDBLogon/setReportLogons</url-pattern>
</servlet-mapping>
<servlet-mapping>
<servlet-name>localizeURL</servlet-name>
<url-pattern>/instances/localizeURL</url-pattern>
</servlet-mapping>
<servlet-mapping>
<servlet-name>logon</servlet-name>
<url-pattern>/rightsTable/logon</url-pattern>
</servlet-mapping>
<servlet-mapping>
<servlet-name>logon</servlet-name>
<url-pattern>/userAdminTool/logon</url-pattern>
</servlet-mapping>
<servlet-mapping>
<servlet-name>setRightsTablePref</servlet-name>
<url-pattern>/rightsTable/setRightsTablePref</url-pattern>
</servlet-mapping>
<servlet-mapping>
<servlet-name>logon</servlet-name>
<url-pattern>/repositoryHelper/logon</url-pattern>
</servlet-mapping>
<servlet-mapping>
<servlet-name>logon</servlet-name>
<url-pattern>/shortcutManager/logon</url-pattern>
</servlet-mapping>
<servlet-mapping>
<servlet-name>logon</servlet-name>
<url-pattern>/adminToolConsole/logon</url-pattern>
</servlet-mapping>
<servlet-mapping>
<servlet-name>logon</servlet-name>
<url-pattern>/query/logon</url-pattern>
</servlet-mapping>
<servlet-mapping>
<servlet-name>setReportSchedule</servlet-name>
<url-pattern>/changeDBLogon/setReportSchedule</url-pattern>
</servlet-mapping>

<session-config>
<session-timeout>20</session-timeout> 
</session-config>

<welcome-file-list>
<welcome-file>default.htm</welcome-file>
</welcome-file-list>
</web-app>
     WEBLOGIC.XML FILE
<weblogic-web-app>
<context-root>/businessobjects/enterprise11/adminlaunch</context-root>
</weblogic-web-app>

MDS9509 iSCSI problem when upgrading to 3.1(2a)

Hi,
Hopefully someone can help, or at least point me in the direction as to where to look to fix this problem. On our site we have a couple of 9509 switches with the DS-X9308-SMIP IPS module, which we use to connect to some exposed LUN's on a HP EVA5000 disk array via a Proxy Initiator, and ACL's on the switch. The clients are on v2.0-754 of open-iscsi on SLES 10.1 machines.
Now we are seeing a strange problem, when we upgraded the SAN-OS on the switches from 2.1(2e) to 3.1(2a) (and I have verified the problem still exists with v. 3.1(3), which is does) in that the iSCSI clients, can still see their disks (via sendtargets), however when they attempt to login to them, you get the following message in dmesg/syslog
scsi4 : iSCSI Initiator over TCP/IP
4:0:0:0: scsi scan: consider passing scsi_mod.dev_flags=COMPAQ:HSV110 (C)COMPAQ:0x240 or 0x1000240
and no device file is created (I have tried passing the option suggested via -v, and in the iscsid.conf file, however it doesn't fix the problem) whereas when the switch is running on 2.1(2e) with the same configuration, it all works, and this appears in syslog:
scsi6 : iSCSI Initiator over TCP/IP
Vendor: COMPAQ Model: HSV110 (C)COMPAQ Rev: 2001
Type: Direct-Access ANSI SCSI revision: 04
SCSI device sdb: 104857600 512-byte hdwr sectors (53687 MB)
sdb: Write Protect is off
sdb: Mode Sense: 97 00 10 08
SCSI device sdb: drive cache: write through w/ FUA
SCSI device sdb: 104857600 512-byte hdwr sectors (53687 MB)
sdb: Write Protect is off
sdb: Mode Sense: 97 00 10 08
SCSI device sdb: drive cache: write through w/ FUA
sdb: sdb1
sd 6:0:0:0: Attached scsi disk sdb
sd 6:0:0:0: Attached scsi generic sg5 type 0
Luckily we have 2 switches, so we have 1 working configuration to leave for production, and one we have to try and troubleshoot this issue. However we would like to update the SAN-OS at some point, and get some failover setup incase of fabric issues.
So has anyone else seen this problem, and know how to fix it? I have gone through the online Cisco documentation, and I could not find anything which helped, hence this post.
Any help would be much appreciated.

Only 2 PDU commands and responses.
These are probably a SCSI Report LUNs and/or a SCSI Inquiry. Perhaps the storage is sending a SCSI check condition, eg. lun masking is blocking the host. You should really get an ethereal trace on the ethernet to see what those PDUs are in detail.
Initiator x.x.164.14 (suse-test)
Initiator name iqn.1996-04.de.suse:01.c48fdfc3cec6
Session #1 (index 6)
Target iqn.1986-03.com.x.x:disk.ress.lun0
VSAN 255, ISID 00023d000000, TSIH 4097, Status active, no reservation
Type Normal, ExpCmdSN 3, MaxCmdSN 130, Barrier 0
MaxBurstSize 262144, MaxConn 1, DataPDUInOrder Yes
DataSeqInOrder Yes, InitialR2T No, ImmediateData Yes
Registered LUN 0, Mapped LUN 1
Stats:
PDU: Command: 2, Response: 2 <<<<<<<<

Oracle Report Font problem when run report from oracle EBS R12

Dear All
I have developed one Report in ORACLE REPORT BUILDER in windows environment. I see the output of that report, its ok, I deployed it on the EBS R12 which is on Linux environment, when i see the output, its fonts totally change and due to change in fonts, output not same as like in previous stage. When i print from dot matrix Printer then sometime its shrink the character and sometime break the output..
Kindly help me in this regard, because this problem i am facing from last few days.
i am waiting for your quick response.
Thanks in advance....
Regards,
Nawaz
Edited by: Haq Nawaz on Nov 5, 2012 11:45 AM

Thank you very much for your reply
I have changed the fonts in the report, but when i run it from the EBS its has the same problem. from the EBS output font look like as (COURIER) rather than CALIBRI WESTERN.
tell me what i have to change anything.

Full-fledged IDEs available in SAP and relevant problem when upgrading / up

Dear All,
Could some please explain the best strategy to adopt as concerns exploiting the full-fledged development / customizing tools provided by SAP; e.g. Composition Environment Visual Composer, Web Dynpro Java, BPM, u2026etc. and avoiding the problems that would arise when upgrading to a newer version, or even updating to a higher fix (Support Package).
Also, as exploiting those powerful development environment tools would necessarily need a good knowledge of the SAP database, could someone please guide to resources whereby necessary knowledge of the SAP underlying database could be aquired.
Thank you in advance for your cooperation.
Best regards.
Reda Khalifa

I tested the SAPEXE.SAR and the ouput was fine. I also have downloaded the file again in the meanwhile. Now I will try to update with this file, but i think it's exactly the same file because the size is the same.
I have now tried the other SAPEXE with the same result. I don't know whats going wrong here
Regards,
Martin
Edited by: Martin Rainer on Jul 21, 2008 8:54 AM

Problem when upgrade NCS 1.1.1.24 to Prime 1.3.0.20

Dear Every one,
          I have problem with upgrading NCS 1.1.1.24 to Prine 1.3.0.20 The upgrade was stop on the step 3 of 7 as below;
     Stage 3 of 7: Executing pre-install ...
          % Pre-install step failed. Please check the logs for more details.
so I use command to show logging;
Apr 27 20:58:56 NCSSERV01 debugd[3104]: [11981]: application:install cars_install.c[550] [admin]: App (NCS) Preinstall script preinstall.sh failed; strings: '/opt/C
SCOncs/webnms/classes/com/cisco/wnbu/server/util/Version.class': No such file#012Patch existing , proceeding upgrade preinstall step:#012#0121.1.1.24#012Upgrade: /opt/
tempFolder4Upgrade already exists. Clearing it.#012Upgrade: Pre-install tempFolder4Upgrade creation Completed.#012#012Pre-install Safekeep Existing Version Started...#
012Pre-install Safekeep Existing Version Completed.#012#012Pre-install Safekeep Config Files Started...#012cp: cannot stat `/opt/CSCOncs/xmp_inventory/dar/customized-f
eature-parts/CONFIGURATION/*': No such file or directory#012Pre-install Safekeep Config Files Completed#012INFO: HA settings : /opt/CSCOncs/conf/rfm/classes/com/cisco/
common/ha/config/haSettings.xml#012INFO: Backing up HA settings...#012Starting Upgrade version checks...#012#012#0121.1.1.24#012ERROR: High Availability is enabled. Hi
gh Availability must be removed before attempting installation.#012
Apr 27 20:58:56 NCSSERV01 debugd[3104]: [11981]: application:install install_cli.c[173] [admin]: error message: Pre-install step failed. Please check the logs for m
ore details.
Apr 27 20:58:56 NCSSERV01 debugd[3104]: [11981]: application:install install_cli.c[177] [admin]: Error while Installing - Application bundle: PI-upgrade-bundle-1.2.
1.12.tar.gz Repository: defaultRepo ErrorCode: -635
Do you have any idea to resolved it?
Thank you for your response.

You will have to get back to the point where all NCS 1.1.1.24 processes are running----
1) ncs stop then ncs start
if that works then great:::: else
2) restore from working backup of NCS 1.1.1.24
Once you are there:::
1) remove HA
2) install patch 12
3) take backup
4) restore that backup to reformat the DB according to patch 12 executables
5) upgrade

Problem when transporting form from DEV system to PRODUCTION system

Hi Experts,
We are developing forms in ABAP, for example there is a form developed in dev system and this form has JS coding in some UI elements events like initialize, on change and on exit; also has one script object defined as variable. this script object has some functions defined in order to do some common validations and field specific ones too.
The form in DEV work fine, all the functions calling, all the validations and the events are working properly as expected. But there is a problem when we moved the changes done in development system into production system. Specifically the script object has the problem: even though the coding is the same in both systems, in production system we had an script error: "Body.CATALOGPARAMS has no properties", as if the Body.CATALOGPARAMS was never instanciated, or it is not defined...
The code that produces this error is the following:
var itemCount = 0;
itemCount = Body.CATALOGPARAMS.DATA.instanceManager.count;
CATALOGPARAMS is table defined as context table coming from an ABAP FM where is filled and passed into the form.
In order to fix this problem I changed that part for the following
var itemCount = 0;
var catalogTable = null;
catalogTable = xfa.resolveNode("Body.CATALOGPARAMS.DATA");
itemCount = catalogTable.instanceManager.count;
This still works as fine as the other in DEV system. But my question is: will I have the same problem when we transport the changes to production system, you have to know that a transport is not something that you can do every day, so I am taking precautions before the transport. Which of both coding is the best for doing this?
Any observations, comments, questions in order to clarify some points are welcome, so please do it.
In advance, thanks a lot.
Mauricio.-
Edited by: Mauricio Poblete on May 11, 2010 4:20 PM

As always, you are the first one to reply... thanks for that!
before everything, I activated the form, then I added this form to a new transport using se80 transaction: I navigated through the form objects and I added the form to a new transport by second click on the form -> other functions -> write transport entry. is this the correct way to assign a transport package with the entire form (including script objects, layouts, and all you told in the last reply)??
Can you give me a guide on how-to add the specific parts to the same transport for forms?
as always, thanks in advance.
Mauricio.-

Document Problems when upgrading B1 from 2004 to 2005

Similar Messages

Maybe you are looking for