Document replication in e-sourcing to SRM integration

Hello,
The company I work for has purchased SRM 7.0(classic deployment), e-Sourcing 5.1(hosted), and ECC 6.0. My company will be hiring consultants to assist in the custom integration. I am trying to find technical documentation that describes the workflow following the rewarding of a supplier to the generation of the PO in SRM or ECC. I cannot seem to find this information on marketplace, notes, or sdn. In general, is it better to replicate the PO in SRM or in ECC?
Thank you in advance,
Brian

The integration delivered as a standard consulting service is E-Sourcing/ CLM to ECC.  You can view the scenarios available in the integration documents.  As I understand direct to SRM integration has been done but it is still custom work.
The urls below will take you to the guides for E-Sourcing 5.1 & CLM 2.0 including the integration guides.
https://service.sap.com/~form/sapnet?_SCENARIO=01100035870000000202&_SHORTKEY=01100035870000706144
https://service.sap.com/~form/sapnet?_SHORTKEY=01100035870000706144
The Online Knowledge product is at http://service.sap.com/~form/sapnet?_SHORTKEY=01100035870000716233
You will need appropriate login credentials (At least S Number) to view these.

Similar Messages

  • Sourcing CLM-SRM Integration : Supplier mapping

    Dear Experts,
    We have successfully implemented the CLM-SRM integration in our landscape.Further to this we have some clarifications required regaridng certain possibilities regarding this scenario.
    1. Is it possible to have a different vendor names for a same vendor in SRM and CLM and to map these via XI in some way.
    2 What is the primary purpose of  'External Validation' option in CLM which we see in Master Agreement.
    Please let me know your valuable suggestions on this topic.
    Thanks and regards,
    Gopi

    Hi Prasad,
    hope you are doing fine.
    I´m standing in front of a riddle!
    I´m sending from the CLM-System a Contract to the SRM-System.
    This can also be created without problems in the source system, as long as we have registered for the appropriate document type in the SRM as "internal number range".
    But I want that the central contract is created in SRM with the "external number" and thus there is a single number for the contract.
    Thus, this number would be the same in CLM and SRM.
    Unfortunately, the SRM central contract always requires an " internal number ".
    If this is not available, then there is a error (CX_SY_REF_IS_INITIAL) in the distribution of CLM contract at SRM.
    Do you know if a BAdI in the Component "ESOSRMINT" exists, which can help me?
    Thank you very much and best regards
    Ghumaan

  • E-Sourcing and SRM Integration

    Hi,
    Has anybody performed SRM 5.0 & E_Sourcing integration 5.0. We are looking that RFx line item could be created manually or automatically copied from shopping cart line item details and later assign source of supply to shopping cart from the award.  I would like you to share your experience/recommendation.  I know SAP is working on standard integration but not sure when it will available to general use.
    Thanks,
    Pradeep

    Hi,
    Look into below thread.
    Re: Integrating Hosted E-Sourcing to ERP for Contracts
    Regards
    Aashish Sinha

  • Pro's and Con's for use of E-sourcing or SRM or E-Procurement in ECC 6.0

    Hi Experts,
    Does anybody of you have a document which describes the main pro and contra's of choosing SRM as a solution or E-sourcing or E-Procurement in ECC 6.0.
    Kind Regards,
    Tom

    Hi Tom
    I had provided details of comparison b/w SRM and SAP E-Sourcing in the thread below. However please note that SAP ECC E-Procurement may not have the best of breed sourcing functionalities that you may be looking into. If you jot down the high level functionlaiities that you are looking at from your E-Proc tool, i can further give you some soecific insight
    At the moment, please see the thread below
    Re: E-sourcing x SRM
    Pls award points if found helpful
    Cheers
    Tridip

  • How - Custom Java App- SRM Integration

    I am looking to replicate some of the "Request for Quotation" creation/management functionality from SRM in a custom application (for business/technical/ease-of-use reasons) and send the created RFQs over to SAP SRM. Can I use XI to send RFQs into SRM (I know I can retrieve them using XI for custom supplier apps, but can I send them in as well)?
    While reviewing the EBP mappings in Integration Builder, I       see there is a mapping for RequestForQuotation_Create_Out, but not for RequestForQuotation_Create_In. Is it possible to add this mapping?
    Thanks for your help in advance.

    Conceicao,
    Hi. I think RFQ's exist on your R/3 backend and not in SRM. As far as I know SRM can hold shopping carts and PO's (When using the extended classic senario). This would explain why you can't find this in XI.
    Check with you applicaiton team who should be able to talk you though how SRM works, or alternatively there are auite a few documents on http://service.sap.com/srm
    On a more technical level :-->
    You can search for BAPI's using transaction BAPI on the backend, or the BSP as below.
    http://<YourHostName>:<8000>/sap/bc/bsp/sap/webservicebrowser/search.html
    Where <YourHostName> is the fully qualified host name, <8000> is the valid port of the Web Application Server. (See transaction SMICM in need). If there is a valid BAPI (Or RFC enabled function module) then these can be called via XI. You might need to create the configuration behind it though.
    Regards
    Rob

  • Vendor replication from R/3 to SRM

    Hi,
    I am using BBPGETVD for the vendor replication from R/3 to SRM.
    I need to modify some fields related to Company data and Vendor data of the vendor during the replication (for example: Vendor should always be created with Invoice Receipt Expected check as checked, Transmission media as 'Mail' etc).
    Can anybody tell me which BAdi or Exit i can use for this purpose.
    Thanks in advance.

    Hi,
    I believe this thread should goto the dedicated forum for SRM.

  • SRM Integration in Universal Worklist (UWL)

    Hi SRM freaks,
    I've one question concerning SRM integration in Universal Worklist (UWL). Currently we have integrated our SAP SRM4.0(SRM_SERVER 500) solution in the SAP Enterprise Portal6.0, and after installation from an additional Business Package the system is working perfectly.
    But we have one concern about UWL integration, the workitems which are send over eMail to the endusers are still containing ITS_DEST link which is defined in PPOMA. The following web link is pointing directly to SRM-EBP ITS link and not to the portal. Our idea would be to include a web link which is pointing to portal in order to access SRM-EBP content from there.
    Can somebody help us on that topic !?
    Thanks for your support.
    Rafi

    Rafi,
    Hi. We are using SRM 5.5 and are intending on changing the ITS_DEST to run SRM through the portal.
    That way any email links sent to the users always contain a link back to the Portal (which has our UWL configured).
    I'm not too sure of the consequences of changing this attribute on release 500. Our system has an internal ITS - does yours?
    Cheers
    Rob

  • R/3 - XI - SRM Integration

    Hi all,
    Please guide/help me with following problem:
    I have configured R/3 - XI - SRM Integration scenario. When I am trying to send orders IDocs from R/3, in XI message is erroring with 'HTTP Destination not found'.
    How to configure Communication Channel using XI adapter, pls guide with detailed steps.
    Regards,
    Sree

    Hi Rama,
    PL. follow this link
    https://websmp106.sap-ag.de/ibc
    find PDP SI config guide it will give you XI settings also.
    BR
    Dinesh

  • Replicating authorization roles via HR replication from ECC 6 to SRM 5.0

    Hi,
    I'm interested in knowing whether anyone has used the distribution model to copy roles (AG objects) between ECC 6 and SRM 5.0.
    Someone said that it's possible so I would like to validate that statement as I don't know whether it is possible and practical.
    If you have any knowledge or experience could you please share it?
    Regards,
    Jerry

    Hello Yann,
    I was told that it can be done but I don't know enough about the HR replication process to acknowledge or challenge, hence the question.
    Are you implying that it's not possible or simply that it's not done?
    I had an earlier post regarding assigning roles to positions in SRM Replicating authorization roles via HR replication from ECC 6 to SRM 5.0 that you replied to but never replied to my subsequent question. It can be done because one of my other clients is doing it. We're however unable to get it work at my current client's site. Do you have any experience with this subject?
    Regards,
    Jerry

  • Order Change Mappping Missing for ECC SRM Integration

    Hello XI Experts,
    We are using  ECC-XI-SRM SUS for PDP scenarion.
    We have uploaded the contents and find that no message mapping program exists for Order Change -- that is ORDCHG.ORDERS02 idoc to SRM.
    However there is a Interface mapping but it refers to the same mapping program as that for Order Create -- ORDERS.ORDERS02 to SRM.
    Can You please let us know , if you faced this as well or not ... and what should be our course of action now.
    Thanks,
    Mani

    Anand ,
    can you let us know one more thing..
    For ECC-XI-SRM integration all the conents are readymade...
    What else do we need to consider... like Alert config etc?
    Cheers,
    Himadri

  • Document replication... is it possible?

    Dear KM friends,
    Is it possible to make Document replication??
    Eg. When ever new file uploaded, deleted or modified in a folder A should reflect on folder B.
    plz any body reply me.
    thanx in advance
    Lakshmikantha

    Hi Lakshmikantha,
    for this you could implement a Repository Service, eacting on file creation, deletion and modification.
    Search for "Repository Service" within SDN for further details.
    Alternatively, if you just want "another place / folder / repository" to reflect the thing happening in folder F of repository R, maybe it would be enough just to create a link to that place?!
    Hope it helps
    Detlev

  • Replication of HR master to SRM

    Hi all,
    Can you provide me some idea regarding the replication of HR master in SRM...any guidlines or any restrications...
    Also can we partial replication is possible in case of HR master in SRM ?
    Regards,
    Navneet.

    Hi Sandeep,
    Thanks for your reply...
    My mail ID is [email protected]
    It will be great help form you.
    Navneet.

  • SAP Sourcing 7.0 integration with SAP ERP - issue with SAP PI

    Hi All,
    We are integrating SAP Sourcing 7.0 with SAP ERP 6.0 with SAP PI 7.1 in middle. So the Sourcing will talk to PI and this intern will talk to ERP. Sourcing is on oracle 11g where as PI and ERP are on SQL 2008. All these 3 are on windows 2003 x64.
    We are following the "Configuration Guide Integration of SAP ERP and SAP Sourcing 7.0" provided by SAP.
    We have successfully configured Sourcing and PI systems as pe the document. In Sourcing, by using background jobs we are able to successfully generate files in "export" folder which is part of FTP directory.
    However the issue is with PI, we configured the "configuration scenerio" in Integration builder and point all channels to the FTP folder in Sourcing. But PI is not picking up these files.
    Is there any way to trigger this in PI system. Or do we need to do anything in sourcing itself.
    Regards,
    Siva.

    Hello Siva,
    I am thinking that you may need to deploy FTP adapter in PI to get this process work fine but not sure.
    Let's see what other experts suggest.
    Thanks,
    Siva Kumar

  • How to do an initial replication from R/3 to SRM 6.0?

    Hello everyone,
    We are working in a implementation of SRM with R/3. My question is about how I can replicate the existing information in R/3 (PR, PO, Invoices, etc) to SRM (as an initial replication). Especially, I wonder if the documents that are in process have to be finished in R/3 or they can be finished in SRM.
    Thanks
    Ivá

    Hi Ivan,
    In addition to what Masa and Claudia has informed,
    mainly the Material Master, Vendor Master, Plants, Storage locations, UOM, Currencies will get transferred from R/3 to SRM irrespective of your implementation scenario (i.e Classic or Extended classic ).
    In case you work on classic scenario, the main document (leading document) P.O will be in R/3.
    In case of Extended classic scenario, the leading document P.O is in SRM and a copy will be created in R/3 but is not changeable in R/3.
    You can have G.R (confirmation) and invoice in both the systems. In case you create in SRM a copy will be created in R/3. In case you create in R/3 the status gets updated in SRM.
    Hope this makes you more clear.
    Award points for helpful answers.
    Rgds,
    Teja

  • Material Replication from ERP to MDM (SRM-MDM Catalog)

    Hi Experts,
    I would like to replicate the material master from the ERP system into the MDM (SRM-MDM Catalog)?
    I don't want to replicate the materials from ERP to SRM, and then from SRM to MDM.
    1. Does ERP provide any transactions to achieve this ( like MECCM / MDM_CLNT_EXTR) ?
    2. Is there a necessity to use the PI system in these communications? If so, what Integration Scenario I need to use in PI Enterprise Repository?
    3. Any further changes to Materials in the ERP system should automatically replicate into the MDM system.
    From SRM, I create SC with items from Materials in MDM.
    Please let me know if you require more information.
    Thanks
    Kasee

    Dear Krupa,
    Thank you for your quick reply.
    So we should consider the scenario where SRM is the central repository for the contracts, and all the changes done in SRM should be replicated to ERP.
    In this scenario, do you know which steps should be done to allow contract replication from SRM to ERP? I already created a central contract in SRM but there is no message sent to PI.
    Thanks in advance.
    Regards,
    Andreia

Maybe you are looking for