Document scanned to preview - how then delete it
Have scanned a document to attach to an email. It ended in Previews but cannot now delete it as it is not wanted. Went to 'help' which said edit then delete, but that option is not available.
hi don't worry, i'coming to be old
clic on the icon in blue insert the name file an press enter
you must see that
click on the first option in your language (french for me ) below the blue windows "tout ...."
you must see your file and click on it to have the inverse video (text must be colored) let the
click pressed on put it on the trash
Similar Messages
-
How to select entire PDF document (scanned image content) and then edit?
I have a PDF file of a booklet that was created by scanning the pages as images. Whoever did the job aligned everything nicely, but for some reason ended up with an output where the pages are all too dark. The white parts of the pages are gray. I can go into the Advanced Editing toolbar and use the tool on the far right, right click the page and choose Select All, then Edit Image and it opens in Photoshop. There, I just change the brightness/contrast and save it. Then when I go back to the PDF the page looks great. Problem is, it only does one page at a time under the "Select All" option, and the booklet has more than 40 pages. Is there a way to select all the pages then edit them in Photosop all at once somehow?
I tried the other things suggested, but they didn't work, either. I ended up creating a new document and copying all of the text into the new document where it can be selected like normal. Go figure...
-
Before sending an email document can be preview
Hi friends,
I am trying to send an mail but before sending document can be preview and then finally document can be send.
Any suggestion regarding this problem.
Regards,
AnishHi Anish,
Check this settings
1) Maintain condition record for that
2) Check the same out out type in herader,edit ,print
3) Once these all will be done go to change mode of that order or invoice what eber it may be in issue out put select print preview. Then you can see that icon. All the above setting are needed.Check and post.
Regards,
Madhu. -
I set up my new iPad, then deleted the Pages documents on my old iPad, but this had the effect of deleting them on my new iPad too because they are synced. How do I retrieve the deleted documents?
Sorry no. That's how it works.
Check if you still have an old backup and do a restore otherwise it's gone. -
Lion Preview can't delete or insert pages to a PDF document
I have the following problem: I open a PDF file in preview. I delete some pages as I used to in snow leopard. Then I save it. The document's page count changes to the correct number in the window title bar. However, if I open the saved version after closing the current window I see that nothing is saved at all! The same thing happens when I try to insert pages to a PDF document. Looks like everything is fine, but when I close and reopen the document no changes are saved. The weird thing is file is modified, i.e. preview saves something but not my changes. It just re-saves the original document.
NUMACER's answer worked for me as well guys ! Didn't need to save a version, it just keeps it like that. I tried saving a version which saved on the same file instead of creating a new one (i know that since I saw the "Last modified" thing being updated at the same time) !
Thanks Numacer -
How can I highlight text in a document scanned in pdf format?
How can I highlight text in a document scanned in a pdf format?
If it wasn't OCRed in Acrobat then you can only use the non-text commenting tools, like the Square or Polygon. Press Ctrl+E to open the Properties bad and you could make it look like a text highlight annotation.
-
I want to scan a document into the computer and then download it onto a disc or a thumb drive,
how to scan a document and then download it onto a disc
Hi SCOOTalong,
The IJ Scan Utility that comes with the printer can assist you with scanning a document into your computer. To scan using the IJ Scan Utility, please follow these steps:
1. On your keyboard, press the Windows key.
2. Start typing IJ SCAN UTILITY. The search window opens as you type. Once the IJ SCAN UTILITY is displayed, please select and open it.
3. In the Canon IJ Scan Utility window that opens, click SETTINGS.... in the bottom right of the window. The Settings dialog box appears.
4. Click the DOCUMENT SCAN or PHOTO SCAN option on the left pane of the window, depending on what you would like to scan.
5. In the SAVE SETTINGS section of the window, you will select the save format and location of the document you are about to scan.
a.) In the FILE NAME field, specify the name you would like to give the file. By default the filename will begin with IMG; you can remove IMG and change it to whatever you would like to name the file.
b.) In the SAVE IN field, please navigate to the area where you would like the file to be saved once it is scanned in. By default, the file will be saved in the MY DOCUMENTS folder, but if you already have the USB flash drive plugged into your computer, you can select that drive as the location to save the scanned document.
6. Once all settings have been selected, click the OK button at the bottom of the window to save the changes. The IJ Scan Utility main screen appears.
7. Click the DOCUMENT or PHOTO button, depending on what you are trying to scan. Scanning starts. Click the CANCEL button to cancel scanning if needed. Scanned images are saved in previously selected folder location specified in the SETTINGS... window.
If you find that you need advanced scanning options such as adjusting resolution, brightness, contrast, saturation, color balance, etc. in addition to the options selected above, please click on the SCANGEAR button on the IJ Scan Utility Main screen, then adjust the items as necessary.
Once the document has been scanned into your computer, you can insert the CD into your computer, then navigate to the area where you saved the scanned document and burn it to the CD. If you did not scan the document directly to the USB flash drive, you can copy and paste the document to the USB flash drive from the save location.
Hope this helps!
This didn't answer your question or issue? Please call or email us at one of the methods on the Contact Us page for further assistance.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well. -
How to delete documents and data off of iphone 4s
Im trying to free up some room on my phone. I got rid of some apps and movies and did what i can but when i plug my phone in there is more Documents & data then i have as apps and music. i just want to get ride of some documents that are saved in my phone but dont now hot to delete them.
Document & Data on iPhone is junks files including browser history, cookies, logs, caches of photos and videos, database files stored by your apps. You’ll notice that some apps while being very small themselves have accumulated a lot of data. An example of this is shown in the image below, you see that the Facebook app is 109 MB whereas the Documents & Data stored is 1.2 GB. This 1.2 GB is what goes into your “Other” data.
These apps on iPhone don’t provide a way to delete Documents and Data, uninstalling and reinstalling the app is not the best option here. With the help of CleanMyPhone or PhoneClean you can delete the documents and data on iPhone without deleting the app itself.
Resource: http://www.fireebok.com/resource/how-to-delete-documents-and-data-on-iphone.html -
How to delete an old locked appleworks (.cwk) word processing document?
How to delete an old locked appleworks (.cwk) word processing document? This is merely a startup file to make AppleWorks come up with text formatting etc all set to desired styles. AppleWorks doesn't work in Mavericks. I cannot find how to use Get Info to unlock this file so that it may be shoved to the trash.
Eustace,
1. Yes, the screenshot did not survive the trip into the text entry box after I hit send or whatever. Maybe I should upload it to my Flickr account and give it its own set and then insert the URL for that set here.
Thanks for the link. I've never used Terminal before so I tried out your link twice. I was able to follow the directions but I did not see an icon for the created file appear on my desktop. Then I added two screenshots to my desktop and those did not appear either. So, I restarted and both the file names that I'd created with terminal and the screen shots appeared on the desktop. Then I tried to use Terminal to make the added file disappear and it would not. However, I was able to select the created filenames and the screen shots and dump them all in the trash and empty the trash.
This morning I tried the method to create a file on the desktop a third time and it still does not appear on the desktop. What is the command for showing a listing of all the files in a directory? Suppose I wanted a listing of all the files on my desktop. I probably should be looking on the internet for a tutorial on using Terminal.
I understand your suggestion that I can use Terminal to delete the unwanted locked files but my computer is not acting quite the way the tutorial in your link suggests.
Thanks for the idea. It tells me I need to learn a bit about using Terminal. -
Just accidentally deleted an unsaved document in pages. How do I retrieve it?
Deleted an unsaved document in pages. How do I retrieve it?
Help needed!If not written over then a disk recvoery problem will likely work
http://data-recovery-software-review.toptenreviews.com/mac-recovery-software/
I believe that you can download a demo of Data Rescue 4, and the demo will give you an idea of what it can recover. If it looks promising, you then can buy the software.
http://www.prosofteng.com/products/data_rescue.php -
First off I have a 3tb fusion drive.
I created a 200gb bootcamp, I tried deleting the bootcamp because I thought I messed it up and googled how to delete a mac partition which told me to use Disk Utility, did that and then erased it and somehow it got locked and wouldn't let me do anything to any partition on my hard drive (everything was greyed out)
After looking up and googling for hours I found a post saying the only way to fix it would be to go into CMD+R and go into the terminal window and type out disklist and then find the first UUID number and do something along the lines of disklist delete (UUID) i forget the exact formula. I did this, and then I had 3 separate untitled hard drives.
One in the size of 1.9gb on in 800gb and one in 121.3gb (which is the SSD), I put my time machine backup onto the 1.9gb untitled and now my computer is booting slowly (because it's no longer running off of the SSD and the original bootcamp is still there.
To be honest I am absolutely confused on what else to do!
Is there anyway I can fix this?How do I go about deleting and then re-adding the hard drives? Completely lost on how to make it back to being a 3gb fusion drive.
Thank you for all your help, I honestly really appreciate it.
I followed your instructions and got the following
diskutil list:
-bash-3.2# diskutil list
/dev/disk0
#: TYPE NAME SIZE IDENTIFIER
0: GUID_partition_scheme *121.3 GB disk0
1: EFI EFI 209.7 MB disk0s1
2: Apple_HFS Macintosh HD 120.5 GB disk0s2
3: Apple_Boot Recovery HD 650.0 MB disk0s3
/dev/disk1
#: TYPE NAME SIZE IDENTIFIER
0: GUID_partition_scheme *3.0 TB disk1
1: EFI EFI 209.7 MB disk1s1
2: Apple_CoreStorage 1.9 TB disk1s2
3: Apple_Boot Recovery HD 650.0 MB disk1s3
4: Apple_CoreStorage 251.9 GB disk1s4
5: Apple_Boot Boot OS X 134.2 MB disk1s5
/dev/disk2
#: TYPE NAME SIZE IDENTIFIER
0: Apple_partition_scheme *1.3 GB disk2
1: Apple_partition_map 30.7 KB disk2s1
2: Apple_HFS OS X Base System 1.3 GB disk2s2
/dev/disk3
#: TYPE NAME SIZE IDENTIFIER
0: Apple_HFS Untitled *1.9 TB disk3
Logical Volume on disk1s2
FD9357F1-1A71-44A0-A01E-41C84F1C8047
Unencrypted
/dev/disk4
#: TYPE NAME SIZE IDENTIFIER
0: Apple_HFS Untitled *251.5 GB disk4
Logical Volume on disk1s4
31B60F49-6981-47A3-9815-6396AD3A9BD6
Unencrypted
/dev/disk5
#: TYPE NAME SIZE IDENTIFIER
0: untitled *5.2 MB disk5
/dev/disk6
#: TYPE NAME SIZE IDENTIFIER
0: untitled *524.3 KB disk6
/dev/disk7
#: TYPE NAME SIZE IDENTIFIER
0: untitled *524.3 KB disk7
/dev/disk8
#: TYPE NAME SIZE IDENTIFIER
0: untitled *524.3 KB disk8
/dev/disk9
#: TYPE NAME SIZE IDENTIFIER
0: untitled *524.3 KB disk9
/dev/disk10
#: TYPE NAME SIZE IDENTIFIER
0: untitled *524.3 KB disk10
/dev/disk11
#: TYPE NAME SIZE IDENTIFIER
0: untitled *6.3 MB disk11
/dev/disk12
#: TYPE NAME SIZE IDENTIFIER
0: untitled *2.1 MB disk12
/dev/disk13
#: TYPE NAME SIZE IDENTIFIER
0: untitled *1.0 MB disk13
/dev/disk14
#: TYPE NAME SIZE IDENTIFIER
0: untitled *524.3 KB disk14
/dev/disk15
#: TYPE NAME SIZE IDENTIFIER
0: untitled *524.3 KB disk15
/dev/disk16
#: TYPE NAME SIZE IDENTIFIER
0: untitled *1.0 MB disk16
/dev/disk17
#: TYPE NAME SIZE IDENTIFIER
0: GUID_partition_scheme *319.4 GB disk17
1: EFI EFI 209.7 MB disk17s1
2: Apple_HFS IMAC TMB 319.0 GB disk17s2
/dev/disk18
#: TYPE NAME SIZE IDENTIFIER
0: untitled *6.3 MB disk18
/dev/disk19
#: TYPE NAME SIZE IDENTIFIER
0: CD_partition_scheme *804.4 MB disk19
1: Apple_partition_scheme 700.4 MB disk19s0
2: Apple_partition_map 32.3 KB disk19s0s1
3: Apple_HFS WD SmartWare 237.5 MB disk19s0s2
-bash-3.2#
diskutil cs list
-bash-3.2# diskutil cs list
CoreStorage logical volume groups (2 found)
|
+-- Logical Volume Group 687E889E-B4A1-4F20-8B36-43D7A3701076
| =========================================================
| Name: Untitled
| Status: Online
| Size: 1946162462720 B (1.9 TB)
| Free Space: 5402624 B (5.4 MB)
| |
| +-< Physical Volume 7BCD8D9C-AEB2-4D48-B248-257EFC7EA922
| | ----------------------------------------------------
| | Index: 0
| | Disk: disk1s2
| | Status: Online
| | Size: 1946162462720 B (1.9 TB)
| |
| +-> Logical Volume Family 3A8A9627-5963-49BA-8E2F-96DC7A1B033D
| ----------------------------------------------------------
| Encryption Status: Unlocked
| Encryption Type: None
| Conversion Status: NoConversion
| Conversion Direction: -none-
| Has Encrypted Extents: No
| Fully Secure: No
| Passphrase Required: No
| |
| +-> Logical Volume FD9357F1-1A71-44A0-A01E-41C84F1C8047
| ---------------------------------------------------
| Disk: disk3
| Status: Online
| Size (Total): 1945804734464 B (1.9 TB)
| Conversion Progress: -none-
| Revertible: No
| LV Name: Untitled
| Volume Name: Untitled
| Content Hint: Apple_HFS
|
+-- Logical Volume Group 98213AE6-9EA8-4FB7-8B72-8E08BFBFD82C
=========================================================
Name: Untitled
Status: Online
Size: 251864797184 B (251.9 GB)
Free Space: 5226496 B (5.2 MB)
|
+-< Physical Volume 20CEF763-635D-4A0D-A107-40E8FB161D06
| ----------------------------------------------------
| Index: 0
| Disk: disk1s4
| Status: Online
| Size: 251864797184 B (251.9 GB)
|
+-> Logical Volume Family 2D3173B3-5B04-47E6-B331-49D1BA58E9F2
Encryption Status: Unlocked
Encryption Type: None
Conversion Status: NoConversion
Conversion Direction: -none-
Has Encrypted Extents: No
Fully Secure: No
Passphrase Required: No
|
+-> Logical Volume 31B60F49-6981-47A3-9815-6396AD3A9BD6
Disk: disk4
Status: Online
Size (Total): 251507245056 B (251.5 GB)
Conversion Progress: -none-
Revertible: No
LV Name: Untitled
Volume Name: Untitled
Content Hint: Apple_HFS
-bash-3.2#
Disk0
-bash-3.2# gpt -vv -r show /dev/disk0
gpt show: /dev/disk0: mediasize=121332826112; sectorsize=512; blocks=236978176
gpt show: /dev/disk0: PMBR at sector 0
gpt show: /dev/disk0: Pri GPT at sector 1
gpt show: /dev/disk0: Sec GPT at sector 236978175
start size index contents
0 1 PMBR
1 1 Pri GPT header
2 32 Pri GPT table
34 6
40 409600 1 GPT part - C12A7328-F81F-11D2-BA4B-00A0C93EC93B
409640 235298960 2 GPT part - 48465300-0000-11AA-AA11-00306543ECAC
235708600 1269536 3 GPT part - 426F6F74-0000-11AA-AA11-00306543ECAC
236978136 7
236978143 32 Sec GPT table
236978175 1 Sec GPT header
-bash-3.2#
Disk1
-bash-3.2# gpt -vv -r show /dev/disk1
gpt show: /dev/disk1: mediasize=3000592982016; sectorsize=512; blocks=5860533168
gpt show: /dev/disk1: PMBR at sector 0
gpt show: /dev/disk1: Pri GPT at sector 1
gpt show: /dev/disk1: Sec GPT at sector 5860533167
start size index contents
0 1 PMBR
1 1 Pri GPT header
2 32 Pri GPT table
34 6
40 409600 1 GPT part - C12A7328-F81F-11D2-BA4B-00A0C93EC93B
409640 3801098560 2 GPT part - 53746F72-6167-11AA-AA11-00306543ECAC
3801508200 1269536 3 GPT part - 426F6F74-0000-11AA-AA11-00306543ECAC
3802777736 1912
3802779648 491923432 4 GPT part - 53746F72-6167-11AA-AA11-00306543ECAC
4294703080 262144 5 GPT part - 426F6F74-0000-11AA-AA11-00306543ECAC
4294965224 1565567911
5860533135 32 Sec GPT table
5860533167 1 Sec GPT header
-bash-3.2# -
I have 2 iTunes accounts. How do I transfer my balance from the old account to the new account and then delete the old account?
i dont think that is possible, but then again, anything is possible. probably gonna have the best luck by contacting itunes / http://www.apple.com/support/contact/
-
Please can someone explain how to delete and email address that when typed in brings up one name but when you hit return to confirm it jumps to another name. I can't find them in my contacts list but they do come up when you type the first few letters of a name.
EG If I type xyz and the name of the person comes up, when I press return to confirm that's the one I want then it jumps to [email protected], always the same def address.
I can't fathom it out.
Thanks
TerriTry this:
Start a new email. In the To address bar, type in xyz like you normally do, press return to confim, and when the address you want to remove shows up in the address bar, move your cursor over the address you want to delete.
A small triangle next to the name will show up. click on it, a drop down menu will open, click Remove from Previous Recipients List. Then do the drop down menu again and Remove Address.
Good luck. -
Hi, I upgraded my girlfriend's iPad 2 using my iMac, however, her iPad was sync with her PC. Although I've made backup earlier, when I restore from backup the apps doesn't sync back, neither her documents on pages. How can I put then back to her iPad?
The backup saves many settings, but it copies photos and other files from the computer back to the iPad after IOS5 wipes the disk. Plugging it into her computer will re-sync it.
-
I shall open delete my present account with iTunes and open a new one - but I do not have the password. How can I then delete the present account??
Since you can't delete Apple IDs and having multiple Apple IDs can cause confusion, what you may want to do is rename your existing Apple ID to the new email (desired Apple ID). That would in effect do what you want, get rid of the old and give you the new.
See "Apple ID: Changing your Apple ID"
ivan
Maybe you are looking for
-
Mail in OS X 10.10.2: Removing attachment makes message unreadable
OS X 10.10.2, Mail 8.2 (2070.6) While in previous versions sometimes message attachments were not recognized and could not be removed, this has improved in the actual version. Now a new problem arose: Sometimes, removing the message, recodes the text
-
Do Aperture and iPhoto share the same database? Meaning if I started importing the images from my camera into Aperture, will I be able to access those photos from iDVD and iMovie?
-
Hi All, I need to change the logo for all BW reports. Can you please tell me the steps involved. Your quick response will be appreciated. Thanks in advance, Sananda
-
Correlation for files containing multiple records
I was learning correlation from a nice blog below. /people/milan.thaker/blog/2008/07/23/correlation-150-runtime-behavior-of-bpm I have one question though. In the case where the correlation is done on a key field say PsNo. Now if two files have mult
-
Can't connect to server using hostname
I have an Apache server running on my MacBook Pro and am able to connect to it's website using localhost just fine. I have 3 clients on the internal LAN that I am testing connection with: 2 MacBook Pros and 1 iPhone. The iPhone and one of the other