Document Search Settings

Hi ,
we have a internal Document search in development which is working fine,
It was working fine in Quality as well ....and in production it was not working for
some reason which we came to know some days back...before that we copied
production into Quality...now the document search is not working there as well..
its purely becuase of configuration....can some tell me...where all this
configurations settings are done for connection to CRM "JCO"...
waiting for ur reply...
regards
moyeen

Can you please try,
1. Transaction SPROXY for proxy generation
2. Transaction SM59 for RFC connection
Regards,
Nitin

Similar Messages

Error while checking in and storing: C:\Documents and Settings

Hi,
i have some problem in DMS , while doing Check in process after attaching documents in CV01n.
geeting error like "Error while checking in and storing: C:\Document and Settings.."
please suggest me how to solve this problem.
thx in advance...
Karthik.

Hi Karthik,
There may be several factors contributing to this error.Some of these maybe:
-Storage category defined improperly/missing
-HTTP/FTP destination missing
-Incomplete Workstation application definition
-Incomplete Authorization
Please run through/search for each of these issues (discussed several times in the forum) and adopt corrective action wherever necessary.
Regards,
Pradeepkumar Haragoldavar

Document iPhone Settings???

Hello,
I did several searches but did not seem to find anything that answers my question below. Which was actually a bit of a surprise. . .
Is there a way, an app, whatever, that will allow me to document all of my current iPhone 4s settings as set in the "Settings" app?
I know that they are saved when I backup my phone but I was wondering if there was a way to document those settings for reference purposes in a way that is printable or viewable on something other than the iphone?? I know I can do screen shots from the iPhone but that would invovle a LOT of screen shots . . . .
You may ask why would I want to do this??
Well, because of the number of folks who have had battery issues after updating from iOS 5.1.1 I have been hesitating to update to iOS 6 (6.1.3). Chances are I will not have any issue but, IF I should have problems, and I need to follow some of the suggestions that involve resetting all the settings or setting up the phone as a new phone, it would be nice to have my current settings documented to make starting over a little easier . .
Make any sense??
Thanks
John

I'm not aware of an app that will do this. You would probably have to take screenshots of your settings to document them.

Document display in IC web... Document search view

Hi,
Please help me with the following requuirement..
Is it possible to display a document by clicking on the document in results view of document search IC web view ? If yes,, is it standard or is that a custom development ? Please guide me..
Also, we have an option for choosing a document and navigating to email view by clicking on the email and it would pick the chosen document as an attachment.. I want to be able to view the doucment there.. when I click on the document a blank interner explorer window opens up... I tested it for MSword and MS excel files.. Can someone please help me how I can get this working ?
Appreciate your help!!
Thank you
Ravi

Hello Andi,
if you choose the letter creation with templates created and stored in the SAP-System, you can save them directly into the SAP-System.
You have create those templates under IMG/CRM/Basic Functions/Content Management/Define Document Templates.
There you can assign/create templates to a Businessobject. In the Webclient just add the entry letter to your Navigation Bar and choose "use external editor" for letter items.
In the webclient you choose the entry letter, and than a template with "create letter". You have to identify a business partner before. But be aware that your security-settings for the IE are set like mentioned in SAP-Note 635049. Now you can store those letters with the save-button of the webclient-interface direct to the system/defined Archive.
hth
Kind regards
Carsten

File not found error when tried to open Document ID settings page

Hi
when i open sitesettings>site collection administratin >Document
ID settings
it shows
file not found error
adil

Hi,
first we need to figure out the error. change the web.config so that you can see the error on browser
1) Obtain the complete call stack instead of the default error page:
<SafeMode MaxControls="200" CallStack="false"/>
to
<SChangeafeMode MaxControls="200" CallStack="true"/>
2) CustomeErrors mode value (in the system.web section) is set to Off:
<customErrors mode="On">
to
<customErrors mode="Off">
Change these value in "c:\inetpub\wssroot" CA dirctory web.config and
C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\14\TEMPLATE\LAYOUTS\web.config .
now again try to do the action. you will get the error on screen.
Whenever you see a reply and if you think is helpful,Vote As Helpful! And whenever you see a reply being an answer to the question of the thread, click Mark As Answer

ESET NOD 32 cannot scan past this point. I keep getting stuck at 56% at the following; C:\Documents and Settings\Owner\Application Data\ Mozilla\Firefox\Crash Reports\Pending. Is this a problem with NOD32 or with Firefox? Thank you.

I ran into a glitch on my system that I tried to fix myself. My NOD32 was always showing the yellow warning circle as my protection status when I started my computer. I tried to fix this every way I new how.
Then I started to get pop ups asking me to fix and then send system error reports to Windows. Some stating they were '''''critical.''''' So I sent NOD32 the e-mail below.
'''Me:''' I cannot seem to run a complete system scan. I keep getting stuck at 56% at the following point. C:\Documents and Settings\Owner\Application Data\
Mozilla\Firefox\Crash Reports\Pending
I also keep getting messages to send error reports to Microsoft constantly. I also have this code C:\pagefile.sys-error opening
Thank you for your assistance.
'''Their solution:'''
Based on the information you provided, we recommend that you upgrade to latest version of ESET NOD32 Antivirus and see if this makes a difference.
Please click or copy/paste the following ESET Knowledgebase article into your web browser for step-by-step instructions:
'''Me''' : I did as they requested and am fully upgraded and licensed with their new edition.
Ran a new scan same problem.
I sent them a new e-mail but now wonder if it is a Firefox issue as, C:\Documents and Settings\Owner\Application Data\
''Mozilla\Firefox\Crash Reports\Pending'' this is where the scan stalls.
Any help would be appreciated.
Thank you.

Try delete the files in Pending folder and make the scan again, do not be afraid to delete the files see : https://support.mozilla.org/en-US/questions/679996
thank you
Please mark "Solved" the answer that really solve the problem, to help others with a similar problem.

Error while checking in and storing: C:\Documents and Settings\Administr

Dear
Whille saving then document in dms , i am getting this error.....
Error message is : "Error while checking in and storing: C:\Documents and Settings\Administrator\My Documen...."
Message Number is 26253
R Karthikeyan

Hi all,
Similar kind of issue occurred in one of our webdynpro applications of SAP NetWeaver Portal-
The error message "Error while checking in and storing" was returned by the BAPI while trying to replace documents in the DMS Server via portal.
But the documents were getting stored in the back end by the use of standard T-Codes.
Later it was found that ABAP tables COMPONENTS & COMPONENT_DATA are inconsistent by looking into the HTTP trace file.
The HTTP patch "http.c#21" was being used in our server.
SAP suggested the below mentioned steps-
-->Download the most recent SAPHTTP version & install it.
-->Then delete the RFC connections SAPHTTP & SAPHTTPA through T-Code SM59
-->Regenerate them again with report RSHTTP05
They were carried out in our ECC server & the issue was resolved.
Please try them out if applicable in your case & let us know.
Thanks & Regards,
Shreyashri Kar

Error while checking in and storing: C:\Documents and Settings\user\Desktop

Hi all,
I'm getting the following Error while checking in original to Content Server
"Error while checking in and storing: C:\Documents and Settings\user\Desktop" Message 26253
OAC0, OACT, CSADMIN settings seems to be Ok .
Settings in DMS SPRO - in dc10, dc20(data carrier used PC)- everything fine
-Authorization issues are not there
Earlier checking in was possible with same settings, but now we are getting this error.
From my end i had test the RFC Connection (SAPFTP, SAPFTPA, SAPHTTP, SAPHTTPA) through SM59 and its test run was successful. So the possibilty of RFC Failure was ruled out.
I knew this problem was arised as there is some issue in Content Repository, but not able to trace it out.
If any one knew what to do in this case, then let me know.
Secondly, what are the things need to be checked to identify the content repository Checking in Issue.
Regards,
S Anand

Error Resolved.
I had only executed the below command
./dbmcli on SDB>db_execute SET LOG AUTO OVERWRITE ON
OK
seems like Log file was full. but now its working.
Thanks for your suggestion.
Regards
S Anand

Writing video to dodgy "Document and Settings" folder

Minor problem that I've come across when generating video using JMF:
On Windows, if the output location is in the users home directory, the video gets written to a copy of that directory with spaces replaced by % characters!
e.g.
C:\Documents and Settings\me\Desktop\Documents%20and%20Settings\meMy%20Documents\My%20Videos
The target URL is selected from a file chooser and looks fine before it's passed to the MediaLocator.
What's going on?

StrideColossus wrote:
captfoss wrote:
URLs, by default, replace spaces with '%20'. Common knowledge, moving on.Really! Never come across that, and neither has anyone else on the team (or at least not for files anyway).Yep. [RFC 1738|http://www.ietf.org/rfc/rfc1738.txt] defines spaces as unsafe characters, and mandates that all unsafe characters be encoded using the % octet encoding scheme.
Anyway, no I'm not explicitly prefixing the protocol, instead just using file.toURI().toURL().
Dumping the URL shows that the protocol is correct, e.g. file:/C:/yadayada.avi on WindowsRather than doing that, because file.toURI().toURL() should result in replacing spaces with %20, I'd recommend trying the following...
MediaLocator ml = new MediaLocator("file:/"+file.getCanonicalPath());

I just got a new PC at work, and I saved all my files in my profile (Documents and Settings...).Being a new firefox install, I cannot recover my custom preferences (and passwords...)

At work, I was asked to exchange my PC for a new one (...) at a moment where I was completely stressed and hardly could find time to do things correctly ( I had big issues with some UNIX servers consuming all my time, and more...) I saved the content of my profile in (Documents and settings) from the XP pro OS. REinstalled Firefox, but cannot find a way to recover or use the content of Application Data\Mozilla\Firefox... How can I recover? (bookmarks, custom stuff passwors etc...)

Profile is a folder which store all your personal data in a safe place
* https://support.mozilla.com/en-US/kb/Profiles
* here explain how to backup profile https://support.mozilla.com/en-US/kb/Backing%20up%20your%20information
* here explain how to restore it
https://support.mozilla.com/en-US/kb/Recovering%20important%20data%20from%20an%20old%20profile

IC Webclient: document search not showing documents for contacts

Hi,
I am working with SAP CRM 4.0, SP7.
I have created an account(a001) with three contacts(c001, c002, c003). I have attached a document(d001) to account a001 and two documents(d002, d003) to contact c001.
Now when I open the IC-Web client UI and go to 'Identify Account' and enter a001 in the Account ID and do a search account, I see three contacts(c001, c002, c003) in the result list of account. When I click in the contact(c001) and go to 'Document Search', it shows only documents attached to a001 and there is no way I can see the documents attached to c001.
Can anyone please let me know, how do I see the documents attached to contact c001 in this case?
Please note that if I enter c001 in the Account ID of 'Identify Account' and then go to 'Document Search', then it shows me the documents d002 and d003. But, I want to see the contacts documents entering from accounts.
Thanks in advance,
Kunal

Hello Hari,
Sorry for the delayed Response, will check this BADI and if it helps then I will update this thread
Thanks
Chandu

MMS Hidden columns appearing in Document Library Settings / Column list

Hello all,
Before you read this please be aware that I have found a resolution (that might be helpful to others) but I am wondering if anyone else has experienced the same thing and the cause.
Our scenario is as follows:
We use a Content Type hub
Most Content Types include one or more Managed metadata columns
The MMS Notes (hidden) columns (e.g. mms_column_name_0) have appeared on the 'Document Library Settings page under 'Columns' for 2 document libraries only. They appear under the actual name of the column (e.g. mms_column_name).
They are NOT visible to the user however (i.e. they are not selectable to be used in a view)
Looking at SharePoint Manager the mms Notes column's are marked as being Hidden = false. Altering this to true has the desired effect.
But has anyone else experienced the same issue as I'm inquisitive as to the cause.
The only thing I can think of that caused this to happen was us using 'Metadata navigation settings' (which allows you to configure navigation hierarchies) for the first time on one of the 2 Doc Libs effected . However, on testing it on other document
libraries the unhiding of columns has not occurred.
Can anyone shed any why this may have occurred?
Jason

Hi jasonl27,
this behaviour:
This is by design. Two separate lists do not have any type of relationship established to distinguish that the
columns are the same. For example, take an arbitrary column called "Position" being created on two different custom lists. Because the column Position is a custom column created
in the list, it has no mapping to other lists. The "Position"
in one list could refer to a title of a person
in one list, or a physical location on a different list. SharePoint cannot tell if these two items are the same or completely different. As a result, a new column name is added when we move the item.
perhaps you may try to do these steps:
$site = Get-SPSite -Identity "http://......../"
$web = $site.RootWeb
$field=$web.Fields["column name"]
$field.Update($true)
$field.Hidden= "True"
$web.Dispose()
$site.Dispose()
Regards,
Aries
Microsoft Online Community Support
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

Belonging To Search Criteria in Document Search

Hi,
I have been trying to find an explanation of the search terms "Me", "My Team", "My Group", "My Company" and "My Responsibilty Group" that are available within the document search.
Having investigated the search results that are returned I cannot work out the logic. If anyone can assist, then points will be awarded. Many thanks,
Jon

Hi,
GO to SPRO->Customer Relationship Management->>>Customer Relationship Management>Application Element->Search Group>Define Search Criteria Selection/Define Search Variant Selection
Groups of different search criteria can be provided in the advanced search. In Account Management for example, you can search for customers according to address fields or corresponding contact partners. The required search fields are always determined from the selection of two dropdown boxes. These are the search fields By-Shuffler and Show-Shuffler.
You define the selection options for the search criteria selection. This search field is in the advanced search of the People-Centric UI. You define requested data for the selection, that is a specific field group with the selection. You can group the search criteria that you have specified under Search Group Structure. They are listed in a dropdown box.
Activities
1. Select New Entries.
2. Enter a user-defined identifier for the search criteria in the By-Shuffler column.
3. Enter a description for the search criteria in the Description column.
reward points if helps
Regards
Kushal

How can I get firefox to not save pdf files (such as bank statements I have looked at) to my documents and settings/temp folder?

I just realized that some (but not all pdf files that I have opened) pdf files of bank statements as well as other pdf files that I have opened when browsing with firefox have been saved to my documents and settings/temp folder. I am concerned about this for security of my data, but also confused as to why all of these documents (as well as some word documents and other types of non .tmp files) are being stored here. Please tell me how to stop this from happening.
Thank you,
Wimajeanne

I can understand that they would appear there if I have the document open, or have recently viewed it. These documents are over a month old, some are over a year old.
Also, it is not just PDF files, I also see word docs and java.exe files in this folder. None of these files have the %temp% in the title as they do when I have a particular document open, rather they are a copy of the file or document that I have saved to my data file.
My main concern is the security of information when random PDF and doc files are stored here without my knowledge.
Thank you.

Item Category in Document Split settings

Hello,
Can anybody throw some information reg. item category in document spliting settings.
Regards,
Venkat

Hi
U should not create new item categories. U have to use only available item categories
Item categories are intended for special procurements (consignment, subcontracting, stock transport etc and services ).
These transactions are built in with several integrations internally.
Vishal...

Document Search Settings

Similar Messages

Maybe you are looking for