Document security not matching

I created a PDF Form in Adobe Acrobat Pro 9, encrypting all document contents with a password.
When I open the document in Reader XI, Select Go to File Menu->Properties, select the Security Tab, the Document Restrictions Summary at the bottom of the Security tab displays different information than what is displayed when I click "Show Details."  The differences are shown below.  I normally wouldn't care about these differences, but in Reader XI, it allows signing, but in Reader for Android, it is not.

Hi,
Document value will be the total of only those line item where the item category has Statistical value as empty in VOV7.
So check your item categories and their value in this field in VOV7. Total the value of each item where the value is empty. This total should be the total of the document. You will have some items where the item category has got non-empty value here, may be x or y. Because of this these values are not considered for header totals.

Similar Messages

  • Document Security Not Retaining Permissions

    I have created a form in 7.0 and published it to my repository on my hard drive. I've uploaded the form to my site for my users. The form has three signature boxes as it's used in a workflow. I have full blown Acrobat 7 but my users don't. I can sign the forms but my users can't. My doc security says that signing is permitted. Their doc security says signing is not permitted. I'M LOST! I've read all the help files regarding digital signatures and document security - nothing is helping me. Is there a guru on this forum that could assist me?
    Trace
    [email protected]

    Hi Alex,
    when you create a library and then go to the permissions settings for it it's set to not inherit permissions?
    Ans : It Does not have any inherited permissions from the parent site.
    Does it have a copy of the standard permissions set? If not what does it have and what is it missing from the site default?
    Ans : No. Empty permissions.
    But whenever i stop and start apply inherited permissions on the parent site works fine (I mean apply to all document library). but i could not do it all time whenever the new library create. I hope whenever the permissions changes on the parent site may
    affect the document lib permissions. pls help how to proceed ?
    Manikandan

  • Net value in billing doc not matching as in sales order

    Hi,
    I have a scenario wherein the net value in billing document does not match as in the sales order for 2 item categories maintained in the sales order. The net value in sales order has one line item category as 10 and the other as 20 but the same is not picked in billing document.
    Any pointers?

    1. Check the copy control setting at item level for Pricing type.
    2. Check the pricing procedure in sales order type & Billing type. Is it same or different.
    3. Possibily the condition valuemay have been changed manually in Sales order or Billing Document type.
    4. Check Document Pricing procedure in sales order type & Billing type. is it same or Different. If it is blank in Billing type, then it will consider the one maintained in sales order type.
    The above are the possibilities,
    Regards,
    Rajesh Banka
    Hope it help to resolve your issue.

  • I'm trying to recover my security questions, but my alternate email address on the link does not match the one I have put in my Apple ID, on the link it is has an old one that no longer exists. Has anyone else been through this or knows how to help m

    I've been trying to remember my security questions for ages, and I can't seem to remember them. On my Apple ID I have changed my alternate email address because the previous one was deleted, but when I go on the "Password and Security" page on my Apple ID and there is a link saying "Forgot your answers? Send reset security info email to ************@*******.com" but it is giving me my old email that does not match my current one on my Apple ID and no longer exists. I have been trying for very long to recover my security questions' answers, but Apple is not coping with me.
    Has anyone been through this or knows how to help me?
    Thank you.

    You need to ask Apple to reset your security questions. To do this, click here and pick a method; if that page doesn't list one for your country or you're unable to call, fill out and submit this form.
    (122986)

  • Regarding : Material document data and PO data do not match (Plant)

    Hi Gurus,
    Please go through this BAPI program.
    While uploading it is giving an error ' Material document data and PO data do not match (Plant) '.
    Please help regarding this issue.For all Other moment types it is working fine except this 351 moment type.
    dATA: i_excel TYPE truxs_t_text_data. "work table for excel upload
    DATA: BEGIN OF it_itab OCCURS 100,
          docdate(10),
          postdate(10),
          mvt_type(3), "Movement Type
          plant(4), "Plant
          lgort(4),
          pur_doc(10), "Purchase Document No
          po_item(3), "Purchase Document Item No
          material(18), "Material Number
         delnote(16),
          erfmg(13),
          uom(3),
         lfmng(13), "Quantity
          batch(10) TYPE c,
          vfdat TYPE vfdat,
          END OF it_itab.
    DATA: it_goodsmvt_head TYPE TABLE OF bapi2017_gm_head_01      INITIAL SIZE 100,
          it_goodsmvt_code TYPE TABLE OF bapi2017_gm_code         INITIAL SIZE 100,
          it_goodsmvt_item TYPE TABLE OF bapi2017_gm_item_create  INITIAL SIZE 100.
    DATA: wa_goodsmvt_head LIKE LINE OF it_goodsmvt_head,
          wa_goodsmvt_code LIKE LINE OF it_goodsmvt_code,
          wa_goodsmvt_item LIKE LINE OF it_goodsmvt_item.
    DATA: w_mat_doc  TYPE bapi2017_gm_head_ret-mat_doc,
          w_year     TYPE bapi2017_gm_head_ret-doc_year.
    DATA: BEGIN OF it_errmsg_goodsmvt OCCURS 10.
            INCLUDE STRUCTURE bapiret2.
    DATA: END OF it_errmsg_goodsmvt.
    DATA : obj_type LIKE bapiache09-obj_type,
           obj_key  LIKE bapiache09-obj_key,
           obj_sys  LIKE bapiache09-obj_sys.
    DATA: v_date1 TYPE sy-datum.
    DATA: v_date2 TYPE sy-datum.
    DATA: w_lines TYPE i.
    DATA: errflag.
    SELECTION-SCREEN BEGIN OF BLOCK bk1 WITH FRAME TITLE text-100.
    PARAMETERS: p_file TYPE  rlgrap-filename.
    SELECTION-SCREEN END OF BLOCK bk1.
    AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_file.
      CALL FUNCTION 'F4_FILENAME'
        EXPORTING
          field_name = 'P_FILE'
        IMPORTING
          file_name  = p_file.
    Start-of-selection processing
    START-OF-SELECTION.
      CALL FUNCTION 'TEXT_CONVERT_XLS_TO_SAP'
        EXPORTING
          i_line_header        = 'X'
          i_tab_raw_data       = i_excel
          i_filename           = p_file
        TABLES
          i_tab_converted_data = it_itab[]
        EXCEPTIONS
          conversion_failed    = 1
          OTHERS               = 2.
      IF sy-subrc <> 0.
        MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
                WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
      ENDIF.
      LOOP AT it_itab.
        REFRESH it_goodsmvt_head.
        REFRESH it_goodsmvt_item.
        CONCATENATE it_itab-docdate6(4) it_itab-docdate3(2) it_itab-docdate+0(2) INTO v_date1.
        CONCATENATE it_itab-postdate6(4) it_itab-postdate3(2) it_itab-postdate+0(2) INTO v_date2.
        wa_goodsmvt_head-pstng_date = v_date2.
        wa_goodsmvt_head-doc_date   = v_date1.
       wa_goodsmvt_head-ref_doc_no = it_itab-delnote.
    wa_goodsmvt_head-pr_uname   = sy-uname.
        APPEND wa_goodsmvt_head TO it_goodsmvt_head.
    Maintain it_goodsmvt_code
        wa_goodsmvt_code-gm_code    = '04'.
    Maintain it_goodsmvt_item
    *LOOP AT it_itab.
    IF wa_goodsmvt_item-po_number IS INITIAL.
        wa_goodsmvt_item-po_number    = it_itab-pur_doc.
        wa_goodsmvt_item-move_type    = it_itab-mvt_type.
        wa_goodsmvt_item-MOVE_PLANT      = it_itab-plant.
        CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
          EXPORTING
            input  = it_itab-material
          IMPORTING
            output = it_itab-material.
        wa_goodsmvt_item-material     = it_itab-material.
        wa_goodsmvt_item-stge_loc     = it_itab-lgort.
        wa_goodsmvt_item-po_item      = it_itab-po_item.
        wa_goodsmvt_item-entry_qnt    = it_itab-erfmg.
        wa_goodsmvt_item-ENTRY_UOM_ISO    = it_itab-uom.
       wa_goodsmvt_item-po_pr_qnt    = it_itab-lfmng.
        wa_goodsmvt_item-batch        = it_itab-batch.
        wa_goodsmvt_item-expirydate   = it_itab-vfdat.
       wa_goodsmvt_item-NO_MORE_GR   = 'X'.
        wa_goodsmvt_item-mvt_ind      = 'B'.
        APPEND wa_goodsmvt_item TO it_goodsmvt_item.
        CALL FUNCTION 'BAPI_GOODSMVT_CREATE'
          EXPORTING
            goodsmvt_header  = wa_goodsmvt_head
            goodsmvt_code    = wa_goodsmvt_code
          IMPORTING
            materialdocument = w_mat_doc
          TABLES
            goodsmvt_item    = it_goodsmvt_item
            return           = it_errmsg_goodsmvt.
    Process of commit work
        IF it_goodsmvt_head[] IS NOT INITIAL.
          DESCRIBE TABLE it_goodsmvt_head LINES w_lines.
        ENDIF.
        IF it_goodsmvt_item[] IS NOT INITIAL.
          DESCRIBE TABLE it_goodsmvt_item LINES w_lines.
          CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
            EXPORTING
              wait = 'X'.
        IMPORTING
        RETURN        =
          CLEAR errflag.
          READ TABLE it_errmsg_goodsmvt INDEX 1.
          IF it_errmsg_goodsmvt-type EQ 'E'.
            WRITE:/'Error in function', it_errmsg_goodsmvt-message.
            errflag = 'X'.
          ELSE.
            WRITE:/ it_errmsg_goodsmvt-message.
          ENDIF.
          IF errflag IS INITIAL.
            COMMIT WORK AND WAIT.
            IF sy-subrc NE 0.
              WRITE:/ 'Error in updating'.
              EXIT.
            ELSE.
              WRITE:/ 'Material Document created successfully and the Document Number for the Material',
                      wa_goodsmvt_item-material,'is:', w_mat_doc, w_year.
            ENDIF.
          ENDIF.
        ENDIF.
      ENDLOOP.

    Hey,
    Just wanted to post that in my case this was the error of MVT_IND field in item table. When I made it from 'B' to blank then it worked.
    Mine is solved....
    Thanks

  • The name on the security certificate is invalid or does not match the name of the site

    Hi Guys,
    Every time when we login to SAP Business One, we are getting two identical security Alerts, that we needs to click "Yes" twice.
    Text of error: “The name on the security certificate is invalid or does not match the name of the site”
    We tried to install certificate, but it is not solved this certificate issue and the alert still pops up on login.
    I guess, something wrong with dashboard settings, but don't really know what exact and how to fix it.
    Thanks,
    Sergey

    Hi,
    Please check SAP note:
    1810486 - Dashboard Certificate Sercurity Alert appears on every
    logon to Business One
    Thanks & Regards,
    Nagarajan

  • HT1933 I have old email address's I used for iTune music purchases and cannot change password on several old accounts. Now some of the music I purchased I can not download and authorize it on my device. What can I do password security does not match my bi

    I have old email address's I used for iTune music purchases and cannot change password on several old accounts. Now some of the music I purchased I can not download and authorize it on my device. What can I do password security does not match my birthdate on two of the accounts. Apple can not send me email with a password authorization on several current accounts that I have with them. How can I contact Apple with this annoying problem I can not fix.

    settings - app/iTunes store - sign out and sign back in with your new id.
    Note - if your older apps needs an update it will use your old apple id and password, as Apps are tied to the apple id that was used to purchase it.
    You can't merge apple id.

  • How do i delete an old iCloud account from phone when I forget my password and I'm not able to reset it because my security questions do not match?! Help!! Currently not able to update any apps or icloud info

    How do i delete an old iCloud account from phone when I forget my password and I'm not able to reset it because my security questions do not match?! Help!! Currently not able to update any apps or icloud info...

    If your device is signed into an old ID of yours that is an earlier version of the ID you want to sign in with, do the following:
    If you are using iMessage and FaceTime, make sure you are signed into these services with your current ID.  If they are signed into the old ID, go to Settings>Messages>Send & Receive and Settings>FaceTime, tap the ID, sign out, then sign back in with your current ID.
    Then temporarily recreate the old ID by going to https://appleid.apple.com, click Manage my Apple ID and sign in with your current iCloud ID.  Click edit next to the primary email account, change it back to your old email address and save the change.  (You should not have to verify the old email account so it doesn’t matter if you no longer have access to it.)  Now go to Settings>iCloud, turn off Find My iDevice and enter your current password when prompted (even though it prompts you for the password for your old ID).  Then save any photo stream photos that you wish to keep to your camera roll (unless you are using iCloud Photo Library).  When finished go to Settings>iCloud, tap Sign Out (or Delete Account if you are not running iOS 8) and choose Delete from My iDevice when prompted (your iCloud data will still be in iCloud).  Next, go back to https://appleid.apple.com and change your primary email address back to the way it was.  Now you can go to Settings>iCloud and sign back in with your current iCloud ID and password (your data will download back to your device).

  • Status 51 material document data and po data do not match(vendor)

    i am using we19 to try an inbound idoc mbgmcr(receipt for po)
    i put in gm_code 01
    movement indicator B(goods receipt for po)
    vendor 3815
    PO 4500015241
    PO Order Item 00030
    Movement type 101
    qty in unit of entry  1
    iso code unit of measurement pc
    on the po screen i see the po item and qty to be delivered is 75
    when i run the inbound idoc i get
    status 51 material document data and po data do not match(vendor) but as i say on the po inquiry screen i see the po vendor item with 75 to be delivered
    what am i missing????????????????

    thank you
    i put in the leading zeros and got rid of that problem
    now i am getting status 51
    posting only possible in 2004/07 and 2004/06
    but in the posting date i use 07/02/2004  i have tried several dates in the period but get the same error
    any ideas?
    thanks you

  • Output map: Document Type does not match any of the given schemas

    On a send port, we have a map that uses a custom xslt. We were hoping to somehow design the map so the output was essentially a generic xs:any schema.  But unless we ad a reference from our map assembly to the assembly that holds the actual schema for
    the message pertaining to the map out put we get an error:
    The Messaging Engine failed while executing the outbound map for the message going to the destination URL "C:\BizTalk\Test\%MessageID%.xml"
    with the Message Type http://test#testmessage. Details:"Document type "outputtest#outputtestmessage" does not match any of the given schemas.
    Is there a way to avoid having to have the reference? 

    Hi ,
    In BizTalk messages are distinct from each other based on the message type . In your case http://test#testmessage (Namespace#RootNode)
    Now coming to your case have you verified whether you have a schema type matching the response is deployed with the solution. The easy way is to look into specific BizTalk application schema node .
    If not ,What you can do is to create a new schema for output having "TestMessage" as record and any element inside it. After that apply a mass copy
    funtiod from source t destination(in your case any type schema created).
    Thanks
    Abhishek

  • The document type does not match any of the given schemas. batching

    I am aggregating messages(batching) in Orchestation by calling pipeline. I have send pipeline where I have standard assemble component and custom pipeline in encode to assign some values .
    When I test it I get following error There was a failure executing the send pipeline: "Zones._870.Pipeline.Send870Pipeline, Zones.870, Version=1.0.0.0, Culture=neutral, PublicKeyToken=51b3a99d8425ff5a" Source: "ZonesAssignGUID" Send
    Port: "SendToAX870" URI: "C:\File_Out\Ingram\870\%MessageID%.xml" Reason: The document type "http://schemas.microsoft.com/dynamics/2011/01/documents/Message#Envelope" does not match any of the given schemas.  
    Can somebody help me how to resolve this issue? 

    Yes this is configured schema as envelope schema. This one is deployed in biztalk . I tried whatever suggest below query and return one record. Not sure but looks like error message misguiding here.
    select * from BT_DocumentSpec where msgtype like '%http://schemas.microsoft.com/dynamics/2011/01/documents/Message#Envelope%'

  • The document type does not match any of the given schemas

    Hi,
    I have created an envelope schema.To precisely process inbound envelope documents,in the xml disassembler component i have used the Documentspec and envelopespec properties.
    in the properties i have the the schema name,Assemblyname
    but i have got the error like The document type does not match any of the given schemas.
    I have verified the schemas have deployed properly.
    can you help me on this?

    Hi Sujith,
    As pointed out by Johns lot's of thing can cause this. You have to analyze lot of things, but this kind of error indicates that the message type that you are debatching is not deployed. For Example :
    If you are debatching on Order than Order schema should be deployed in the admin console.
    One more point that you need not to specifiy Documentspec and envelopespec properties until and unless there are multiple schema's of same message type deployed in different assembly. The dissasembler component will automaticaly disassemble the messages
    just looking after the body XPATH.
    Regards,
    Rahul Madaan

  • The name on the security certificate is invalid or does not match the name of the site" : IE

    Hi All,
    All clients are getting “the name on the security certificate is invalid or does not match the name of the
    site” when its reboot and try to access website.
    I don’t have idea about certificate authority. Can anyone help on how I start troubleshooting this.
    Is there any group policy setting which resolve this issue.
    Please suggest what parameter I have to check. 

    > All clients are getting “the name on the security certificate is invalid
    > or does not match the name of the site” when its reboot and try to access website.
    "View Certificate" should tell you.
    Greetings/Grüße,
    Martin
    Mal ein
    gutes Buch über GPOs lesen?
    Good or bad GPOs? - my blog…
    And if IT bothers me -
    coke bottle design refreshment (-:

  • Exchange 2013 w/Outlook 2013 "The name of the security certificate is invalid or does not match the name of the site"

    I've completed an upgrade from Exchange 2003 to Exchange 2013 and I have one last SSL message that I can't get rid of.  I've installed a 3rd party cert that is working great for webmail and cell phone access but for some reason the Outlook 2010/2013
    clients get prompted for a security warning.  I just implemented the SSL cert yesterday and I've noticed that new installs of Outlook seem to work just fine.  My Outlook 2013 client doesn't prompt me with the message but I have other users who are
    still getting the "The name of the security certificate is invalid or does not match the name of the site" error.  The domain on the cert error show up as server.mydomain.local.  I've gone through all the virtual directories and pointed
    all of my internal and external URL's to https://mail.mydomain.com.   This made one of the two warnings go away but not the second.  I've dug around on google and gone through everything I could find here and as far as I can tell my internal
    and external url's are configured properly and I can't figure out where this error is originating from.  Any ideas on where I should look outside of the virtual directories? 
    I'm including a good link I found that contains all of the virtual directories I updated.  I've checked them through both CLI and GUI and everything looks good.
    http://www.mustbegeek.com/configure-external-and-internal-url-in-exchange-2013/
    http://jaworskiblog.com/2013/04/13/setting-internal-and-external-urls-in-exchange-2013/

    Hi,
    When the Outlook connect to Exchange 2013/Exchange 2010, the client would connect to Autodiscover service to retrieve Exchange service automatically from server side. This feature is not available in Exchange 2003 Outlook profile.
    Generally, when mailbox is moved to Exchange 2013, the Outlook would connect to server to automatically update these information. It needs time to detect and update the changes in server side. I suggest we can do the following setting For autodiscover service:
    Get-ClientAccessServer | Set-ClientAccessServer –AutodiscoverServiceInternalUri https://mail.mydomain.com/autodiscover/autodiscover.xml
    Please restart IIS service by running IISReset in a Command Prompt window after all configuraions.
    Regards,
    Winnie Liang
    TechNet Community Support

  • Copy & Paste From Illustrator to Photoshop not matching document size

    I just recently reformated my computer and I've been having an issue with copy and paste from Illustrator to Photoshop. Before I could copy a 2"x2" vector box from Illustrator into photoshop making a new document and the size and resolution would match. That is the new document would say 2"x2" at 300 ppi in photoshop and the preset would read "clipboard". I would then hit ok and paste and it would match perfectly. Now since I've reformated, photoshop always creates a new document with the wrong size regardless of the settings I enter in Illustrator or photoshop. I have document raster and effects set at 300 ppi in Illustrator and I have the new document set at 300 in photoshop, but it always transfers the 2"x2" box as some other size no matter what resolution I change it too. Again this used to work before so I'm assuming there is some setting I forgot about. Does anyone know? The main issue is the clipboard preset is not matching the document size, its almost as if Illustartor is telling photoshop it's a different resolution when it's not. Copying to 72 ppi seems to have no issue, which makes me think Illustrator just isn't sending it out at 300 ppi, but I don't know why as I have the document set at 300 ppi.

    Have you found an answer that wasn't posted here yet? I have the same issue.

Maybe you are looking for