Document Server not working properly on Vista and website

I just got a new PC with Vista Home premium edition and Document server is definitely not working the same as it did on my XP. I know it's an old program so I guess it's finally be time to buy the new stuff but why won't it work on the website I utilized it with? I'm using it with a basic html website that contains no flash (some rollovers though) and it still doensn't transfer over properly. You can even see it if you go to the third tab on the home page http://www.creditcardforum.com to see what I mean. Is it finally just time to let go of this product and upgrade? Has anyone used it successfully with with Vista?

I mad the biggest mistake when I bought all new Windows Vista Pc's. They dont work very well with many products. I tried to format and install a Vista PC and put Windows XP Pro on it but I had so many troubles since I need every new driver in the world. I now just use Adobe Document Server on my Laptop that has XP Pro on it. Works great on there.
Regards,
Agyemang Fellowes
Director of Operations
OPTiC BURST COMMUNICATIONS
Office: 1 (209) 885-4211
http://www.opticburst.net/
http://www.iphone-sim-unlock.com/

Similar Messages

  • Mail is not working properly (cannot replay), and skype cannot be answered

    Did the verification, repair and installation disk of Mac. Why mail is not working properly (cannot replay), and skype cannot be answered?

    I most often do not restart my new MBPro .... 10.9.5 .....  but happened to a day or so ago, and it immediately began to block / problem with email .... I waited to see if it sorted out, but no .....
    I get he server “p06-imap.mail.me.com” cannot be contacted on port 993 .....     then deselected SSL and that did not help, so went back and selected it again .... and again not working .....
    I can see my stuff "online" but I do not want to do it that way EVER ..... 
    your "deselect mail" in ICloud preferences    ....   did nothing good for me .... any other thoughts Linc ??   in fact, some hundreds of in and sent emails did not show up .... I'm hoping they are going to when this gets fixed .... but hey, .....  right now I'm NOT in business ....
    thanks

  • No sound and audio device not working properly, T61 vista

    I unistalled the audio device SoundMax integrated HD audio because I had problems getting the mic of my new webcam (Logitech pro 9000) to work. But after reinstalling the SoundMax audio driver the audio device is no longer working.
    Installing the SoundMax driver doesn't report any problems and the device manger also says that the SoundMax integrated digital hd audio device is working properly. But the speaker icon on the taskbar is crossed out. When hovering the mouse over the speaker icon it says Volume: 0 SoundMax integrated digital hd audio. When opening the Volume Mixer it says "No audio decivice is installed"...
    I've completly removed all drivers and reinstalling several times but I cannot get it to work so I really need some help now.
    All software + drivers regarging the webcam has been completly removed.
    System data:
    T61, Vista business
    Audio chip seems to be a Analog Devices 1984
    SoundMax driver version 6.10.1.5510 (latest available from lenovo)

    Really silly bug, but there are times with the T series laptops, specifically the T61s that seem to not project the sound through the speakers and the way to fix it is to just keep hitting the silver volume buttons up by your power button on the actual laptop.  This may or may not work for you, but I literally just got done with this on a T61 running a fresh installation of XP.  The buttons on the lenovo itself control the direct signal input and do a very poor job with integrating with Windows Vista and XP.
    Let me know if that works for you.

  • X server not working properly

    I've come to Arch to find out more about the underlying kernel, etc, but (this is in a VM) I can't seem to get X to work properly, or more specifically, GNOME.
    startx loads a bare X server, and through Xterm I can manually load metacity/mutter and gnome-panel. gnome-shell and GDM do not work.
    One error i suspect is causing this:
    Window manager warning: 0 stored in GConf key /desktop/gnome/peripherals/mouse/cursor_size is out of range 1 to 128
    Guest additions is installed (through pacman).
    Any know what might be happening?
    Last edited by archlinoob (2011-11-19 20:23:40)

    Thank you guys. I have changed the thread title and here is /etc/rc.conf:
    # /etc/rc.conf - Main Configuration for Arch Linux
    # LOCALIZATION
    # LOCALE: available languages can be listed with the 'locale -a' command
    # DAEMON_LOCALE: If set to 'yes', use $LOCALE as the locale during daemon
    # startup and during the boot process. If set to 'no', the C locale is used.
    # HARDWARECLOCK: set to "", "UTC" or "localtime", any other value will result
    # in the hardware clock being left untouched (useful for virtualization)
    # Note: Using "localtime" is discouraged, using "" makes hwclock fall back
    # to the value in /var/lib/hwclock/adjfile
    # TIMEZONE: timezones are found in /usr/share/zoneinfo
    # Note: if unset, the value in /etc/localtime is used unchanged
    # KEYMAP: keymaps are found in /usr/share/kbd/keymaps
    # CONSOLEFONT: found in /usr/share/kbd/consolefonts (only needed for non-US)
    # CONSOLEMAP: found in /usr/share/kbd/consoletrans
    # USECOLOR: use ANSI color sequences in startup messages
    LOCALE="en_US.UTF-8"
    DAEMON_LOCALE="no"
    HARDWARECLOCK="UTC"
    TIMEZONE="Australia/Sydney"
    KEYMAP="us"
    CONSOLEFONT=
    CONSOLEMAP=
    USECOLOR="yes"
    # HARDWARE
    # MODULES: Modules to load at boot-up. Blacklisting is no longer supported.
    # Replace every !module by an entry as on the following line in a file in
    # /etc/modprobe.d:
    # blacklist module
    # See "man modprobe.conf" for details.
    MODULES=()
    # Udev settle timeout (default to 30)
    UDEV_TIMEOUT=30
    # Scan for FakeRAID (dmraid) Volumes at startup
    USEDMRAID="no"
    # Scan for BTRFS volumes at startup
    USEBTRFS="no"
    # Scan for LVM volume groups at startup, required if you use LVM
    USELVM="no"
    # NETWORKING
    # HOSTNAME: Hostname of machine. Should also be put in /etc/hosts
    HOSTNAME="myhost"
    # Use 'ip addr' or 'ls /sys/class/net/' to see all available interfaces.
    # Wired network setup
    # - interface: name of device (required)
    # - address: IP address (leave blank for DHCP)
    # - netmask: subnet mask (ignored for DHCP) (optional, defaults to 255.255.255.0)
    # - broadcast: broadcast address (ignored for DHCP) (optional)
    # - gateway: default route (ignored for DHCP)
    # Static IP example
    # interface=eth0
    # address=192.168.0.2
    # netmask=255.255.255.0
    # broadcast=192.168.0.255
    # gateway=192.168.0.1
    # DHCP example
    # interface=eth0
    # address=
    # netmask=
    # gateway=
    interface=eth0
    address=
    netmask=
    broadcast=
    gateway=
    # Setting this to "yes" will skip network shutdown.
    # This is required if your root device is on NFS.
    NETWORK_PERSIST="no"
    # Enable these netcfg profiles at boot-up. These are useful if you happen to
    # need more advanced network features than the simple network service
    # supports, such as multiple network configurations (ie, laptop users)
    # - set to 'menu' to present a menu during boot-up (dialog package required)
    # - prefix an entry with a ! to disable it
    # Network profiles are found in /etc/network.d
    # This requires the netcfg package
    #NETWORKS=(main)
    # DAEMONS
    # Daemons to start at boot-up (in this order)
    # - prefix a daemon with a ! to disable it
    # - prefix a daemon with a @ to start it up in the background
    # If something other takes care of your hardware clock (ntpd, dual-boot...)
    # you should disable 'hwclock' here.
    DAEMONS=(hwclock syslog-ng network netfs crond)
    Removing the hashes in /etc/inittab just gives me a whole bunch of identical error messages in post #2. I have reverted to the console as the default DM
    UPDATE: added dbus then gdm to the end of daemons list.
    BIG UPDATE: GNOME works now! But it loads the fallback. How do I get the full session?
    Last edited by archlinoob (2011-11-19 20:56:13)

  • Verdana Font not printing properly using Vista and Acrobat Pro v8

    Has anyone got any ideas as to how I can fix this problem.  When I send a word doc to the pdf printer that is all in verdana font it prints out gibberish, however, if in aerial or times new roman thats fine.  I'm using Vista and printing via a terminal server.

    S.D.A
    I'm sorry but I'm not if the font is embedded as I expect it is, as I have no problem printing the font on various personal computers I use.  However, the user that I am trying to support is having problems.
    Previously when we were using Windows XP Pro and Acrobat Pro v8 and the user had no problems printing over the LAN.  We recently moved and ugraded our systems to Windows Server 2008, Windows Vista and printing via Terminal Services.  The fault may lie with the pinter drivers not being installed on the Terminal Server, but I'm not sure I just need someone to confirm they have had the same problem and how they fixed it.
    Any suggestions would be greatful.

  • Macbook 2009 Not working properly [Error -50 and other several issues]

    Hello there!
    I am having several issues with my Macbook, they all showed unexpectedly. Most applications would not work, such as Disk Utility or Pages. Safari couldn't load any webpage, just after a long time it was able to display them. Also, I was having some kind of error -50 when trying to move or delete any file, and iTunes was showing the following message; "iTunes can't verify the identity of the server "ax.itunes.apple.com". The certificate for this server is invalid. You might be connecting to a server that is pretending to be "ax.itunes.apple.com". I couldn't turn off the computer either, when I tried to doing so it wouldn't do anything, I had to press the power button to turn it off. After that, I turned the computer on, everything showed up as normal but after a few seconds later the computer suddenly turned off, I tried again but I got the same result. Afterwards, I tried in recovery mode, and weirdly, it didn't show any problem. I ran disk utility and verified the hard drive but it says it's working perfectly. The SMART status also says the hard drive is fine.
    What could this mean? All these problems appeard suddenly, I've never had any of those issues before.
    I have a late 2009 Macbook with Mavericks Installed,
    4GB of RAM,
    A 320GB Seagate Hard drive,
    And a 250MB Graphics Card.
    Thanks for your help!

    Hello there!
    Thanks for your reply! I have no anti-virus software installed, but I have (rather said, had) CleanMyMac though. I installed the demo version and ran it only once. I was curious about it, I had no idea it could make as much damage as MacKeeper.
    Also, I scaned again my internal Hard Drive with Disk Utility using the OS X Installation DVD, and according to the report, the partition where the operative system is located is corrupted. Disk Utility tried to repair it but failed, and the most reliable option was to reformat the disk. I proceeded to reformatting it but unfortunately the process was not succesful - I got an error that reads; "POSIX reports: The operation couldn’t be completed. Cannot allocate memory". I tried to reformat the disk using the terminal, but I was only able to erase it, not to format it. I did a research and I found out the problem might be the SATA cable, (https://discussions.apple.com/thread/3507546).
    Could that explain also the weird behaviour when I was using the computer? I guess my best bet now is to get a new SATA cable.

  • Cursor arrow gone from solid black to having white lines go through it and trackpad is not working properly in mail and adobe acrobat - anyone know how this could have happened and how to solve it?

    Can anyone help me?  Concerned that I may have some kind of malware.  My cursor arrow and trackpad are behaving strangely,  The cursor used to be a solid black arrow but now seems to have horizontal white lines running through it.  The trackpad does not function normally either.  For example, when I use my trackpad to scroll up and down in mail  it sometimes works and sometimes does not.  In adobe acrobat it sometimes does not work.  In facebook, the cursor does not line up behind the menu keys as it should.
    Any one know how this might have happened and how I can stop it?

    Please read this whole message before doing anything.
    This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
    The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
    Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you boot, and again when you log in.
    Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a Fusion Drive or a software RAID, you can’t do this. Ask for further instructions.
    Safe mode is much slower to boot and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal boot may also be somewhat slow.
    The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    Test while in safe mode. Same problem?
    After testing, reboot as usual (not in safe mode) and verify that you still have the problem. Post the results of the test.

  • The keys on my mac book pro (2009) are not working properly, both letters and numbers.  I think I pressed something,but I cannot find a numlock key or other to undo this problem

    Both the letters and numbers on my mac book pro (2009) are not working correctly, but the caplocks key still lights up,the delete key is like a back key,the o key is enter,etc. I think I must of pressed a button but I cannot find numlock or the action to fix it back to normal.
    Need Help Please

    Try this. Open one of your files. The window that contains your picture is named at the top. Command click on the name and you'll see the entire path starting with its name and then moving to the folder, the folder it is contained in, etc all the way to down to the hard drive volume name. This should tell you where to find the folder.

  • I want to go back to 3.6 because 4 is dangerous and 5 does not work with essential addons and websites. How do I find previous versions to install?

    The new major update cycle is way too fast. I want to get off. Please tell me how to uninstall 4.0.1 and reinstall 3.6.4 (MacOS-X). Reading up on the critical vulnerabilities for 4.0 convinced me that I don't need this headache. I've only installed 4.0 on one of my three computers (home). Wait! I see that 3.6.dmg is still in my downloads! Now, I just need to figure out how to uninstall 4.0!

    Due to security vulnerabilities, rolling back to Firefox 4.0.1 is not recommended. Firefox 3.6.18 would be the safer choice.
    Here's the process to roll back:
    First, I recommend backing up your Firefox settings in case something goes wrong. See [https://support.mozilla.com/en-US/kb/Backing+up+your+information Backing up your information]. (You can copy your entire Firefox profile folder somewhere outside of the Mozilla folder.)
    Next, download and save Firefox 3.6 to your desktop for future installation. http://www.mozilla.com/firefox/all-older
    Close Firefox 5.
    You could install Firefox 3.6 over it (many have reported success) or you could uninstall Firefox first. If you uninstall, do not remove your personal data and settings, just the program.
    Unless you have installed an incompatible add-on, Firefox 3.6 should pick up where you left off. If there are serious issues, please post back with details.
    Note: I haven't actually tried this myself!

  • Office web App Server Not Working Properly

    Hello Everyone,
    We have published Office Web Apps server externally through reverse proxy and it has some issues. Now if we browse the link
    https://owas.schs.sharjah.ae/hosting/discovery (Internally) or
    https://owa.schs.sharjah.ae/hosting/discovery (Externally) I get the XML Page.
    Now when I try to browse any other pages in the directory for example
    https://owa.schs.sharjah.ae/op/generate.aspx or another Url like
    https://owa.schs.sharjah.ae/m/Presenter.aspx whether it is browsed internally and externally I get the error file not found '404' but the files do exist in the directory.
    No idea on how to solve this issue, any help on this matter is really appreciated.
    Regards,
    Sheldon
    MVI - Most Valuable Indian

    What specific issue are you having?
    Are you wanting to use the WAC to open files using the URL? If so, have you set OpenFromUrlEnabled to true? You can
    check this using Get-OfficeWebAppsFarm cmdlet and Set-OfficeWebAppsFarm OpenFromUrlEnabled $true cmdlet.
    I have several Office WebApp instances that I've deployed for Lync PowerPoint sharing where the setting is not enabled and I am also unable to browse to those pages, but PowerPoint sharing works fine.
    If this helped you please click "Vote As Helpful" if it answered your question please click "Mark As Answer" | Blog
    www.lynced.com.au | Twitter
    @imlynced

  • Color correction not working properly with Vista?

    Hi,
    I am developing an AIR application for our camera club. It’s important that it will display corrected colors – consistent with colors displayed by Adobe Photoshop.
    The ActionScript code includes call to:
    stage.colorCorrection = ColorCorrection.ON;
    I have PC Vista. The main panel of the application displays thumbnails and can be scrolled down. When displayed first, the colors are not corrected. However while scrolling down the thumbnails, the colors are correct and identical to the ones displayed by Photoshop. These revert back to the uncorrected colors when stopping the scrolling.
    When double clicking on the thumbnail the full size image is displayed by PopUpManager. Its colors are correct – consistent with the Photoshop.
    Any idea what’s happening? Why are the colors flickering?
    I am using Flex 3 SDK, Flex 4 has the same issue.
    I have Flash Player 10. I color calibrated my monitor and have a valid ICC profile.
    Thanks for any help.

    It seems to be working here. Try toggling "Show Mask"

  • Spotlight not working properly in Save and Save As dialog boxes

    When I'm in any program and I go to the "Open Files" dialog box, I can use the spotlight search to search for files by name or by content, and it works fine. However in the "Save File" and "Save File As" dialog boxes, spotlight will only find folders by name. It will not find any files by name or by content in the current folder or anywhere else. It will only show any folders who's name is a match for what I type.
    I spoke to Apple support who suggested that I reindex my drive, which I did, but it didn't help. Their next suggestion is to reinstall the OS, which I'm not going to do. By the way, I have a Mac Pro and a MacBook Pro which both exhibit the same behavior, so it appears to be a problem with the OS itself. They are both running 10.6.1. I booted up in safe mode and had the same problem.
    Any ideas?
    Thanks,
    Mark

    If you want to report this to Apple, either send Feedback or send bug reports and enhancement requests via its Bug Reporter system. To do the latter, join the Apple Developer Connection (ADC)—it's free and available for all Mac users and gets you a look at some development software. Since you already have an Apple username/ID, use that. Once a member, go to Apple BugReporter and file your bug report/enhancement request. The nice thing with this procedure over submitting feedback is that you get a response and a follow-up number; thus, starting a dialog with engineering.

  • XSLT document() function not working properly

    I have this XSLT:
    <xsl:copy-of select="document($file1)/employee/address/*"/>
    I have this java which is setting the parameter for $file1
    transformer.setParameter("file1",file.getAbsolutePath());I printed out the value of $file1 in the XSLT style sheet using:
    <xsl:message><xsl:value-of select="$file1"/></xsl:message>
    The Path it prints out is the correct path, let say its c:\myfile\file1.xml
    When it reaches the doument($file1) function, it seems that the path is getting changed.
    To give you an example, if $file1 = "c:\myfile\file1.xml" and my XSLT file is located at c:\xsl\myXSl.xsl then the path that document() gets is:
    c:\C:\xsl\myfile\file1.xml
    This causes the following error to occur:
    (The filename, directory name, or volume label syntax is incorrect)
    Why is document() inserting the path where the XSL file which it is in into the path of the file I'm trying to open? I am using the Xalan API to transform this XML.
    Have anyone seen anything like this before?
    Thanks
    Al

    When I looked up some Internet pages that described the document() function, they all said it required a URI as its parameter. A Windows file path is not a URI. However it's possible to get a URI from a File object, so you might want to try that.

  • KM Document iview not working properly...

    Hi,
    I am in EP6SP2 P4HF8 for Portal and KM.
    Based on my user requirment, I need to link a document from KM directly
    to my detail Navigation under my Portal roles.
    I have done the following.
    1) Create a KM Document iview.
    2) Gave the KM Document path under "Path to Document".
    3) When I run this from a role or preview the same here, I first get
    a "Do you want to save this file?" option...with anunknown file type,
    Instead of the document directly opening up or asking the user a
    standard "Do you want to open or Save" internet option.
    4) When I try to save this file, it does not show me the name of the
    document and the file type...but shows me some other garbage stuff.
    Kindly help asap. My user requirment is that the document should open
    directly when the user clicks on the link.
    Is there any problem in the KM Document iview..???
    Regards,
    Rajan.K

    What type of document? (mimetype) Maybe the document you have in KM doesn't have a mimetype and KM doesn't kow how to handle it. Have you tried clicking on document under repository in KM Administration.

  • Macbook 2009, will not work properly, is slow and music is jumpy any help or advice is appreciated

    i bought my macbook pro in the summer of 2009, it worked perfectly fine for pretty much a year and now its messed up
    music on itunes will stop every 10 to 30 seconds for 2/3 a time
    laptop will freeze (shows the loading disc) most of the time im on it
    will not play any games eg sims medeval, same as itunes it pauses every 30 or so seconds
    if anyone has any ideas on what i can do to sort it out would be much appreciated!
    i have tried resetting it and loading everything back on, it didnt work
    thanks leozmck

    update, after another reformat and reinstall of the drive and OS, the macbook is running (not shutting down anymore) but only on A/C, and still does not recognize the battery. I installed Snow Leopard, checked to make sure I had latest firmware updates (did) then updated to the latest Snow Leopard version, about a 1.26 GB download, then used my USB install key for Lion and upgraded. No shutdowns during all of this, looks like a clean Lion install, but still does not see the Battery.
    Any of you experts have any ideas?

Maybe you are looking for