Document Services Configuration will not start

Hello
I am trying to run the above service in order to insert a new credential.
Unfortunately the service cannot open.
We also tried to run the ABAP program FP_CHECK_DESTINATION_SERVICE
but the program does not run because it continues to ask for the user and password (although they are legitimate).
The error we get is:
user J2EE_Guest
HTTP request prcocessing failed. HTTP error [401] will be returned. The error is [Cannot authenticate the user. No details available].
Thanks
Shay

You have the ads_agent pw set incorrectly on the java side. -- I think

Similar Messages

IPod service manager will not start after installing iTunes 10

iPod service manger will not start after loading iTunes 10. iPhone will not connect. I've removed reinstalled, wiped the registry reinstalled and deauthorized, removed and reinstalled from several different downloads. I have full permissions fo rservices and am administrator.. We now have three other units in teh office with the same issue.
now what do I do?

Don't know about fixing PitStop. However, have you tried a simple repair on Acrobat. If Acrobat won't open you can do that from the Programs and Features menu (Add/Remove Programs in OS prior to Win7).

SSO service unavailable, will not start up, corrupted?

One of the packages in SSO was corrupted and would not compile. When I try to compile the package manually, it errors out and fails. I ran the ptlasst script to reinstall SSO in Infrastructure. This succesfully restored all the packages for SSO. However, SSO is still down (the rest of 9iAS is up and running). So, I am trying to run the ssocfg.bat file to reconfigure SSO, but I get the error message shown above. SSO is still down.
Does anyone know what this error message means and how I could resolve this issue? This issue has caused me much frustration and grief. I would appreciate any light you could shed on this matter.
ERROR MESSAGE ****************************************************
D:\ias9021\sso\bin>ssocfg.bat http thematrix.natinst.com 7777
ERROR : Exception while configuring SSO Server :ORA-01403: no data found
ORA-06512: at "ORASSO.WWSSO_LS_PRIVATE", line 4324
ORA-06512: at line 1
SSO Server Re-configuration Finished

It is trying to boot from your network card because it cannot find the hard drive. Time for service.

Tomcat service will not start with JRockit 8.0

We are trying to use JRockit with Tomcat 4.0.1. It runs great as a console app
but when we try to run it as a service it will not start. Has anyone had any luck
with this.

Hi Bob!
You can use the jk_nt_service descibed and downloadble at
http://members.ozemail.com.au/~lampante/howto/tomcat/iisnt/
To make this work on JRockit you have to follow these instrcutions.
But also do this:
Make sure that you environment variables are set up correctly. Make sure
that
you have set your JAVA_HOME environment variable correctly, and that that
"%JAVA_HOME%\bin" is available in your PATH environment variable before any
other directory where any version of java.exe may exist. When running
applications as Windows services it is crucial that you set these
environment
variables system wide. To do this open
Start->Settings->Control Panel->System
and select the Advanced tab. Click on the "Environment Variables." button.
To
set system wide environment variables you must edit in the lower part of
this
dialog, i.e. the part called System variables.
When using jk_nt_service the Tomcat startup is defined in
%CATALINA_HOME%\conf\jk\wrapper.properties
Make sure that you set the three properties wrapper.tomcat_home,
wrapper.java_home and wrapper.cmd_line are set accordingly.
wrapper.tomcat_home must be set with the installation directory of tomcat
wrapper.java_home must be set to the same value as the JAVA_HOME environment
variable.
The property wrapper.cmd_line defines the startup command.
At the time of writing, this property should be set to
wrapper.cmd_line=$(wrapper.javabin) -Xnohup
-Djava.security.policy=="$(wrapper.tomcat_policy)"
-Dtomcat.home="$(wrapper.tomcat_home)" -classpath $(wrapper.class_path)
$(wrapper.startup_class) -config $(wrapper.server_xml) start
for JRockit. Normally this command includes a non-standard option to stop
the
JVM from shutting down the process when a user logs off. For JRockit this
non-standard option is -Xnohup, for the Sun JVM it is -Xrs.
/ Sten
"Bob Siragusa" <[email protected]> wrote in message
news:[email protected]...
Thanks for your reply Sten.
We slightly modified tomcat.exe to install our app as a service.
Really the only changes we made were to the name of the service and weadded a
few application parameters with -D. We still use the same startup andshutdown
hooks to the Bootstrap jar. This is where we think there may be a
problem.
>>
I am now trying to use SilverEgg Technologies open source Java ServiceWrapper
but have not progressed very far yet.
Bob
"Sten Garmark" <[email protected]> wrote:
Hi Bob!
Are we talking Tomcat controlled by a Windows Service? If so, how are
you
trying to make this happen?
Can you please point me to the documentation of this and the win32
wrapper
service that you are using?
I would like to be able to re-produce your problem.
/ Sten
"Bob Siragusa" <[email protected]> wrote in message
news:[email protected]...
We are trying to use JRockit with Tomcat 4.0.1. It runs great as aconsole
app
but when we try to run it as a service it will not start. Has anyonehad
any luck
with this.

Event ID: 7024 Windows Process Activation Service will not start error %%-2147467243

Reside on a network that contains network GPOs. We are given authority to create unique GPOs for our specific LAN Web server. Our Intranet web page requires Windows Process Activation Service and another service to open. Before creating
the local GPO, the two services were in Disabled mode, but we could set them to Manual and start them. The network GPOs would reset them at random every few hours, but again we could reset them. After creating the local GPO, the WPAS is set to
Manual and will not start at all with the Title errors being generated. Administrator previously completed successful GPO mods in WinSvr2003. Is there a different way of doing GPOs in WinSvr2008R2? I cannot provide logs or further details
other than the above. Any ideas would be helpful.

> open. Before creating the local GPO, the two services were in Disabled
> mode, but we could set them to Manual and start them. The network GPOs
> would reset them at random every few hours,
Then you should adjust your "network" GPOs which we usually call "domain
gpos"...
> them. After creating the local GPO, the WPAS is set to Manual and will
> not start at all with the Title errors being generated.
# for hex 0x80004015 / decimal -2147467243 :
CO_E_WRONG_SERVER_IDENTITY
winerror.h
# The class is configured to run as a security id different
# from the caller
# 1 matches found for "80004015"
Seems you screwed up the service account or service security or
something like that...
> previously completed successful GPO mods in WinSvr2003. Is there a
> different way of doing GPOs in WinSvr2008R2?
No.
Martin
Mal ein
GUTES Buch über GPOs lesen?
NO THEY ARE NOT EVIL, if you know what you are doing:
Good or bad GPOs?
And if IT bothers me - coke bottle design refreshment :))

HT4839 the iPhone Configuration Utility 3.6/2.2 for Windows will not start up/load anymore.

Hello.
the iPhone Configuration Utility 3.6 for Windows will not start up/load anymore.
It worked fine at first, then I tried to start it up today and I got an error:
failed to create an ipc port access is denied
Now there is no message at all. Just wont launch.
I find NO support at Apple. I have seen about 20 other cries for help on these forums and no seems to have received any help for this. Does anyone know how to get this Utility working?
I am using Windows XP SP3
I have tried upgrdading to .NET 4 SP1 from .NET 3.5 SP1 and that didnt work so went back the other way and still no change.
I tried completely uninstalling and deleting all references in Regedit and reinstalling from the start about 4 times.
I tried completely uninstalling and then going back to an older version (2.2) and it doesn't work either.
Unfortunately there is no help on Apply that I can find and trying to find an -actual email support for Apple software or products is a joke- (man, nothing is more aggravating when you need product help and the provider hides or completely does away with any way to contact them for help ro sends you on an hour long search for it...)
I need to get this working as I am providing an easy iphone configure for my VPN service. Can anyone help?
THanks!!
Tres

Hello.
the iPhone Configuration Utility 3.6 for Windows will not start up/load anymore.
It worked fine at first, then I tried to start it up today and I got an error:
failed to create an ipc port access is denied
Now there is no message at all. Just wont launch.
I find NO support at Apple. I have seen about 20 other cries for help on these forums and no seems to have received any help for this. Does anyone know how to get this Utility working?
I am using Windows XP SP3
I have tried upgrdading to .NET 4 SP1 from .NET 3.5 SP1 and that didnt work so went back the other way and still no change.
I tried completely uninstalling and deleting all references in Regedit and reinstalling from the start about 4 times.
I tried completely uninstalling and then going back to an older version (2.2) and it doesn't work either.
Unfortunately there is no help on Apply that I can find and trying to find an -actual email support for Apple software or products is a joke- (man, nothing is more aggravating when you need product help and the provider hides or completely does away with any way to contact them for help ro sends you on an hour long search for it...)
I need to get this working as I am providing an easy iphone configure for my VPN service. Can anyone help?
THanks!!
Tres

Flexnet licensing service Service on local computer will not start

was running acrobat 8 standard. downloaded 9 trial--wouldn't work)uninstalled 9 trail had problems with 8 not working and uninstalled 8 (leaving the resource\cemap\identity-h and identity-v files (locked unable to delete). figured full version of 9 from CD would work but after installing 9 and accepting eul i received "Licensing for this product has stopped working. You cannot use this product at this time. You must repair the problem by uninstalling ... " After 2 hours with tech support during which I ran the cs3 cleaner multiple multiple times in multiple configurations we traced the problem to the Flexnet licensing service- it flat will not start I get error message "Could not start the Flexnet Licensing Service service on Local Computer. ERROR -5: Access is denied."
At that point tech support had me run some more cs3 cleaner stuff under another user and ended up with an error 127....
does anyone know how to completely remove the flexnet licensing service and reinstall it cleanly? any help??

was running acrobat 8 standard. downloaded 9 trial--wouldn't work)uninstalled 9 trail had problems with 8 not working and uninstalled 8 (leaving the resource\cemap\identity-h and identity-v files (locked unable to delete). figured full version of 9 from CD would work but after installing 9 and accepting eul i received "Licensing for this product has stopped working. You cannot use this product at this time. You must repair the problem by uninstalling ... " After 2 hours with tech support during which I ran the cs3 cleaner multiple multiple times in multiple configurations we traced the problem to the Flexnet licensing service- it flat will not start I get error message "Could not start the Flexnet Licensing Service service on Local Computer. ERROR -5: Access is denied."
At that point tech support had me run some more cs3 cleaner stuff under another user and ended up with an error 127....
does anyone know how to completely remove the flexnet licensing service and reinstall it cleanly? any help??

In illustratorCC2014, I tried to configure the use of the GPU of the new features. I have installed the java. I have a 3D set in navidia control panel. illustrator CC2014 will not start. I have not repaired even if you restored in navidia control pane

In illustratorCC2014, I tried to configure the use of the GPU of the new features.
I have installed the java.
I have a 3D set in navidia control panel.
illustrator CC2014 will not start.
I have not repaired even if you restored in navidia control panel.
I will add information here. HP Z400 Workstation, windous7Pro, NAVIDIA Quadro 2000, Intel Xeon CPU W3565 3.2GHZ

In illustratorCC2014, I tried to configure the use of the GPU of the new features.
I have installed the java.
I have a 3D set in navidia control panel.
illustrator CC2014 will not start.
I have not repaired even if you restored in navidia control panel.
I will add information here. HP Z400 Workstation, windous7Pro, NAVIDIA Quadro 2000, Intel Xeon CPU W3565 3.2GHZ

When install iTunes 11.1.4 It says Apple Mobile Device Service service will not start. It was started when I began the installation. Is this an Apple software bug?

When install iTunes 11.1.4 It says Apple Mobile Device Service service will not start. It was started when I began the installation. Is this an Apple software bug?

I have this issue. It isn't the MSVCR80 issue. No matter what I do nothing will let me even INSTALL Apple Moblie Device. Further details are in my thread:
https://discussions.apple.com/thread/5831093

Vista SP1 - CF Service will not start

Running Vista Business. Life was good, I was productive! (CF 8 btw).
After installing Vista SP1, CF service will not start. Digging a little deeper, turns out JRUN can't fire off "coldfusion", one of the servers listed. Here is the error:
04/06 11:49:20 error Failed to create new connection
java.net.SocketException: select failed
at java.net.PlainSocketImpl.socketAccept(Native Method)
at java.net.PlainSocketImpl.accept(PlainSocketImpl.java:384)
at java.net.ServerSocket.implAccept(ServerSocket.java:453)
at java.net.ServerSocket.accept(ServerSocket.java:421)
at jrun.jms.core.kernel.mipc.MultiplexConnectionServer.run(MultiplexConnectionServer.java:15 4)
Some digging turned up the possiblity that the jndi.properties file isn't being read. Changed permissions on it to let everyone in. Heck, you guys can probably get at it right now form where you are its so open!
More digging, turns out Windows Firewall like to block port 2930, which is apparently used for internal communication with jndi settings or some such. Opened that up. Found evidence of further internal communication on port 900, opened that up to.
Found this very useful and a bit scary info about missing DLLs and so forth:
http://www.communitymx.com/content/article.cfm?page=6&cid=224AA
Found reference to the updated Vista TCP/IP stack being a culprit in some cases, which often seemed to come down to, get this, a new host file entry for localhost: ::1 localhost. Commented that out, still no joy.
Tried reinstalling. Still no go.
Pretty much exhausted all possibilities I was able to think of or find info about.
Any ideas or similar experiences? Or, failing that, the address of a tall building to jump off? Thanks!

Read the manual?!?! No way, never! That would be like... stopping at a gas station to ask for directions!
But seriously, I did poke around there a bit. I do tend to forget that there is more to there is more there than the language reference.
Never been stuck like this though. Probably done over 100 installs dating back to CF4 on just about all windows flavors but have never had to dig in to the guts of the underlying Java like this.
Thinking it has to be something unique to this machine; I have done other Vista installs of CF8 with only minimal issues (typically having to set the service to run under an account that has permissions, maybe even set jrun.exe and jrunsvc.exe to execute under an admin account, but thats about it). Unfortunately, partially because of the environment we operate in, a fresh workstation install is a good day and half to two day ordeal.
Help me Obi Wan, you're my only hope!

CF8 Application Server Service Will NOT Start

I ran into this error:
java.lang.OutOfMemoryError: Java heap space
and after researching it it seemed that I should up the max heap size on the Java/JVM page, so I increased my max heap size to 1044MB from 512, via the CF Administrator, I also added maxPermSize= 256m. Then I restarted the server, but the Application Server service will not start.
I opened home/runtim/bin/jvm.config and set the heap size to 1024, restart, service still wont start.
Set the max heap size to 512 and removed maxPermSize, restarted server, service still won't start.
Set the entire java.args equal to: -server -Xmx256m -Dsun.io.useCanonCaches=false -xx:MaxPermsize=128m -XX:+UseParallelGC -Dcoldfusion.rootDir={application.home}/../ -Dcoldfusion.libPath={application.home}/../lib -Dcoldfusion.classPath={application.home}/../lib/updates,{application.home}/../lib,{appli cation.home}/../gateway/lib/,{application.home}/../wwwroot/WEB-INF/flex/jars,{application. home}/../wwwroot/WEB-INF/cfform/jars
Restarted, still the services will not start.
Does anyone have any ideas?
The error I get when trying to start the services is:
Windows could not start the ColdFusion 8 Application Server on Local Computer. For more information, review the System Even Log. If this is a non-Microsoft service, contact the service vendor, and refore to service-specific error code 2.
Thanks!

Once you have ColdFusion running again this will bring you back to your initial problem:
java.lang.OutOfMemoryError: Java heap space
Suggest take a copy of your working JVM.CONFIG (so you have a backup) then add some debugging to the JVM Arguments eg:
# Arguments to VM
java.args=-server -Xmx512m -Dsun.io.useCanonCaches=false -XX:MaxPermSize=192m -XX:+UseParallelGC -XX:+PrintGCDetails -XX:+PrintGCTimeStamps -XX:+PrintHeapAtGC -verbose:gc -Xloggc:cfjvmGC.log -Dcoldfusion.rootDir={application.home}/../ -Dcoldfusion.libPath={application.home}/../lib -Dcoldfusion.classPath={application.home}/../lib/updates,{application.home}/../lib,{appli cation.home}/../gateway/lib/,{application.home}/../wwwroot/WEB-INF/flex/jars,{application. home}/../wwwroot/WEB-INF/cfform/jars
Once ColdFusion is restarted again a log file will be created called \ColdFusion8\runtime\bin\cfjvmgc.log. Open the log file and you will be able to see how the New, Tenure and Permanent memory spaces are working. Given you now know which buffer is filling (excluding New made up of Eden and a couple Survivor spaces - because those fill and empty all the time) you can make adjustments to JVM.CONFIG knowing which value you intend to alter. Likely you want to alter either Xmx or MaxPermSize. When you think the Java heap space is resolved turn logging off by removing the bolded details.
HTH, Carl.

SBS Manager Service will not start

I seem to have a bit of a problem the SBS manager service will not start at all. I have tried rebuilding the SBS Monitoring database and this did not help. This started happening a few months after a SBS 2008 to SBS 2011 migration, does anyone have any ideas
as I no longer get reporting or alerts.
At first I thought it might have had something to do with permissions but not too sure how to check and what to check apart from the common things, DB permissions, permissions on folders etc but I may have missed something?

Hi,
Regarding the current issue, since you have tried to rebuild the SBS monitoring database without any help, I suggest we could try to refer to the following article this time to see if it works.
FAQ: SBS 2011. The Windows SBS Manager service terminated unexpectedly
http://msmvps.com/blogs/bradley/archive/2013/09/19/the-windows-sbs-manager-service-terminated-unexpectedly.aspx
Best Regards,
Andy Qi
TechNet Subscriber Support
If you are
TechNet Subscription user and have any feedback on our support quality, please send your feedback
here.
Andy Qi
TechNet Community Support

Coldfusion 8 service will not start. Server log is ending with "Starting license..." (Emergency)

Our server has gone down and the Coldfusion 8 service will not start. There is no information in any of the logs for anything today since its gone down. Ive checked the root logs directory as well as the runtime logs directory.
The server.log is the only file being updated and it shows "Starting logging..." and then "Starting license..." and hangs. The service does not start and the log gets nothing more after this point. Memory continues to go up slowly, we've increased the start timeout tremendously with no effect. There is little to no CPU usage.
Our server is licensed and has never had this problem before. It is the standard version.
Our server is completely down and we are losing clients. From what we can tell a windows update occurred, which we have since removed in case it was the issue, and when the server restarted CF did not come back. We have been working on this for hours with no results.
Please help and let me know anything you may need which will help diagnose our issue.
Thanks

So that others who see this know the solution.
I started Coldfusion from the command line: c:\Coldfusion8\runtime\bin\jrun -start coldfusion. This brought up all the commands as it worked through them. From that we found that CF was looking for license.properties in the C:\Coldfusion8\runtime\lib folder. We found a copy in the C:\Coldfusion8\lib folder. For now we've left it running under my account and then after hours are going to try and see if the service will run now that we've copied that properties file to the other direcory.
Probably simple to everyone on here but was new and odd to us. Wanted to put what we found out here in case it happens to anyone else.

NAM service will not start

I am in the testing phase of the AnyConnect client. The network access manager will not start. In the system tray console, i see "service unavailable" for network:.
When i try to start the nam service it says "the operation could not be completed. Access is denied.".
I am a local admin on this box. I had someone create a group policy making sure this service would start automatically but it does not start. I have tried to do a 'net start'.
Do I need to disable Windows network manager first?
Any other ideas? Thanks.
Win7 x64
Solved this...
Uninstalled Anyconnect.
Disabled UAC (in control panel and by running cli script)
Reinstalled Anyconnect. NAM service now avilable in services.msc.
Had to enable dependent service-WLAN AutoConfig.
NAM service started, network connection now working correctly.

Solved this...
Uninstalled Anyconnect.
Disabled UAC (in control panel and by running cli script)
Reinstalled Anyconnect. NAM service now avilable in services.msc.
Had to enable dependent service-WLAN AutoConfig.
NAM service started, network connection now working correctly.

SySAM service will not start

I've installed the SySAM software into the folder C:\Sybase.
Per instructions I copied the license I was given to the licenses folder in C:\Sybase\SySAM\SYSAM-2_0. I instructed the license manager to return the existing standalone license and regenerate as a served license. I trust she did so.
Now the service will not start. I've tried "net start sysam", "sysam start" , and rebooting the machine. I get "service did not respond in a timely fashion error".
What can I do?

Russell,
If the license that you moved to the license folder has incorrect information, than the sysam server will not start.    Verify that the license file contains the hostid and hostname of the machine that is running the Sysam server. If the hostid or hostname is not right, the sysam server will not start.
Also the license file needs to be a served license.   Verify that you see a line in the file with: USE_SERVER
If you don't see that in the license file, than the license is a unserved license.
Another reason why the sysam server will not start is if there is a SYSAMLicenseServer.lic file in the licenses folder.    If there is, remove it.
Try starting the sysam server from the Control Panel -> Administrative Tools -> Services -> Sysam
Thanks,
Beverly Duquette

Document Services Configuration will not start

Similar Messages

Maybe you are looking for