Document sets and search not working properly

Hello,
I'm having some problems with the search function within my document library.
I have three kind of Content type Document sets:
Project A, Project B and Project C.
In my document library i have the following Document sets.
Project 1 | Project A document set
Project 2 | Project B document set
Project 3 | Project B document set
Project 4 | Project C document set
Project 5 | Project A document set
With the search function i can only find Project 2,3 and 4. The Content type document set (Project A, B and C) are all the same.
I already did a full crawl of search. Anyone any idea's what is the cause of this problem. I need to fix this before Friday, because of a presentation i need to do for school.
Hope you guys can help me out!

I've done a full crawl, but it had no effect. The Log shows nothing strange...
Or is it because i'm using . in the names?
Project 1 = 13.22.0001
Project
2 = 13.22.0002
Project 3 = 13.22.0003
etc.

Similar Messages

  • FireFox auto updated to 6.0 this weekend and has not worked properly since. I have uninstalled and reinstalled. Made sure all windows componets were up to date and still no joy. Any idea? Windows 7, 64 bit, normal configfuration. It is extreamly slow.

    FireFox auto updated to 6.0 this weekend and has not worked properly since. I have uninstalled and reinstalled. Made sure all windows componets were up to date and still no joy. Any idea? Windows 7, 64 bit, normal configfuration. It is extreamly slow and never finishes loading ANY page.

    I have had a similar problem with my system. I just recently (within a week of this post) built a brand new desktop. I installed Windows 7 64-bit Home and had a clean install, no problems. Using IE downloaded an anti-virus program, and then, because it was the latest version, downloaded and installed Firefox 4.0. As I began to search the internet for other programs to install after about maybe 10-15 minutes my computer crashes. Blank screen (yet monitor was still receiving a signal from computer) and completely frozen (couldn't even change the caps and num lock on keyboard). I thought I perhaps forgot to reboot after an update so I did a manual reboot and it started up fine.
    When ever I got on the internet (still using firefox) it would crash after anywhere between 5-15 minutes. Since I've had good experience with FF in the past I thought it must be either the drivers or a hardware problem. So in-between crashes I updated all the drivers. Still had the same problem. Took the computer to a friend who knows more about computers than I do, made sure all the drivers were updated, same problem. We thought that it might be a hardware problem (bad video card, chipset, overheating issues, etc.), but after my friend played around with my computer for a day he found that when he didn't start FF at all it worked fine, even after watching a movie, or going through a playlist on Youtube.
    At the time of this posting I'm going to try to uninstall FF 4.0 and download and install FF 3.6.16 which is currently on my laptop and works like a dream. Hopefully that will do the trick, because I love using FF and would hate to have to switch to another browser. Hopefully Mozilla will work out the kinks with FF 4 so I can continue to use it.
    I apologize for the lengthy post. Any feedback would be appreciated, but is not necessary. I will try and post back after I try FF 3.16.6.

  • TS3003 Installed QuickTime7 from Snow Leopard installation disc and still can't view videos on iPhoto. A box appeared saying "you have installed Mac OS X software older than your current version of Mac OS X and may not work properly."  Now what?

    Installed QuickTime7 from Snow Leopard 10.6.8 installation disc and still can't view videos on iPhoto. A box appeared saying "you have installed Mac OS X software older than your current version of Mac OS X and may not work properly."  Now what?

    Download and install the latest QuickTime Player for Snow Leopard > http://support.apple.com/kb/DL923

  • My iphone5c is still under the 1 year warranty, the top button constantly sticks and does not work properly will Apple still replace my phone even though there is a few chips and scratches on the back?

    My iphone5c is still under the 1 year warranty, the top button constantly sticks and does not work properly will Apple still replace my phone even though there is a few chips and scratches on the back?

    As Peter says above, only an Apple Store genius can advise you.
    But to further clarify, you seem to postulate that if Apple helps you, the cure would be a replacement.  That is not necessarily true.  Let them look at it and advise you what the remedy is.  They may offer you nothing (saying it's your fault), or they may offer you a solution (keeping your current iPhone), or possibly a replacement.

  • Search not working Properly in Portal

    Hello Experts,
    we are using standard KM search iview for displaying custom search results in Portal,we have maintained Search Control set and Search option set properties of iview.
    We have created custom control set and option set in KM ,we also configured the indexing in index management.
    After this configutration search is working for documents which resides in 1 Folder of KM but with same configuration it is not working for the documents residing in 2nd folder.
    Any input ,help and suggestion are most welcome.
    Thanks & Regards,
    Siddharth

    Hello Siddharth,
    Check what is the the indexing status of the files in the second folder ? File --> Details --> View --> Index information. Ideally it should be indexing status okay.
    If the status is okay, then check for any filters in your search option set.
    If it is not okay, then check whether approval or any time based publishing is enabled in the folder. Or is there any special characters in the folder name which is preventing the files inside from getting indexed.
    Regards,
    Vinod

  • Filter and navigation not working properly

    Hi Gurus,
    I have two reports - report1(source) and report2(target) report.
    In report1, it shows two columns - Market_ID, Amount_sold
    In report2, it shows two columns - Market_ID, Reasons(where Market_ID is made prompted)
    In report1, I have made the Value Interaction as 'Navigate' and the target as 'path of report2' in Column properties ->Column Format
    But, when I click on Market_ID(report1), it is NOT showing the details of that particulat Market_ID(report2).
    It is showing the details of whole Market_ID in report2. That means, the filter is not working properly.
    Is there any method in which the report2 shows the details of particular Market_ID which is selected from report1(market_ID)?
    Best Regards,
    J

    yes you can,
    in your source add a master_name column and in that make the navigation.
    in the master_id column go to column format and style options and check the Use Custom CSS style option and type,
    display: none
    now in your source the master_id column will get hidden. in your target make the master_id prompted.
    now click on the master_name in your source, your target will get filtered by the corresponding msater_id
    thanks,
    Karthick
    Edited by: kart on Jun 7, 2010 11:52 AM

  • Wifi and Bluetooth not working properly on my iphone

    MMy iphone are not working properly it's is not in warranty but they have many of problem in my iphone so please gave me solution of problems otherwise i break my iphone if want that

    Use the search function at the to right of the forum, look for the thread with the green checkmark.

  • Contribution points display and search not working in Safari 5?

    Hi all,
    Are the contribution points display and SDN search not working for everyone else in Safari 5 or is it just me?
    Chrome 5 and Firefox 3.6 (all on Mac OS X 10.6) seem to be working fine.
    Thanks,
    Ethan

    The thread titles are no longer hyperlinked in the contributions overview and the quote chevron does not work either since yesterday.
    Who was the beta tester and where are their test scripts?
    A simple thread with a little bit of everything in it and a windiff against the before & after would detect these things?
    Cheers,
    Julius

  • Touch and keyboard not working properly

    hello there,its been one month i am using this laptop hp envy energystar 15-u201ne. i have an issue on touch and keyboard..sometime when i am typing there is no effect in screen from keyboard. and sometime the touch is not working properly. how  can i fix this issue..?

    Hi  ,
    Thank you for visiting the HP Support Forums and Welcome. It is a great site for information and questions. I have looked into your issue about your HP ENVY 15-u201ne x360 and issues with the TouchScreen and the Keyboard not functioning correctly. Here is a link to the HP Support Assistant if you need it. Just download and run the application and it will help with the software and drivers on your system that need updating. If you need it here are links to troubleshoot the Touchscreen and the Keyboard. I hope this helps. Thanks.

  • SaveState and restoreState not working properly :/

    Here is my code:
    public class UIChooser extends UIComponentBase implements StateHolder
    private String submitedCategoryItemID;
    private boolean transientFlag;
    public UIChooser()
        super();
        transientFlag=false;
      public boolean isTransient()
        return transientFlag;
      public Object saveState(FacesContext context)
       System.out.println("saveState");
        Object[] values = new Object[2];
        values[0] = super.saveState(context);
        values[1] = submitedCategoryItemID;
        return values;
      public void restoreState(FacesContext context, Object state)
        System.out.println("restoreState");
        Object[] values = (Object[])state;
        super.restoreState(context, values[0]);
        this.submitedCategoryItemID = (String)values[1];
    }saveState and restoreState not working.
    Phrases "restoreState" and "saveState" aren't displayed and value of submitedCategoryItemID not restored. :/ What's happend?

    yes you can,
    in your source add a master_name column and in that make the navigation.
    in the master_id column go to column format and style options and check the Use Custom CSS style option and type,
    display: none
    now in your source the master_id column will get hidden. in your target make the master_id prompted.
    now click on the master_name in your source, your target will get filtered by the corresponding msater_id
    thanks,
    Karthick
    Edited by: kart on Jun 7, 2010 11:52 AM

  • "This cable is not certified and may not work properly..." Official Apple cable!

    I am using an official Apple charging cable and keep getting the message "This cable is not certified and may not work reliably..." And this cable has worked until now! Restarting the phone works sometimes but only for a bit.
    What's wrong here/

    Thanks, but it didn't fix it. I've tried 3 different Apple cables and I get the same message with each. I'm guessing it's the port has become defective somehow although with all the other questions about the same issue, I wonder if it could be a software issue!

  • "Search" not working properly. Bug?

    Perhaps it's just me (because no one else seems to have reported on this). I raise it here because I cannot find a bug-report form for Apple. (I'm sure there is noe, I just can't find it...)
    OSX 10.47, G5 dual 2GHz, 4.6GB ram. Not a newbie.
    Although Spotlight sits up there, I traditionally use command-F when I want to find something. Say I have a folder full of images, some of which are duplicates. For example, say I have a folder with, among other things, image-25.jpg and image-25•02.jpg
    In the good old days, (OS 9) it was easy to dispose of dupes. Open the window in list view and you could carefully drag so you selected just the wider-width names that the •02 gives them. Not any more.
    So, to quickly find what could be in theory 100 dupes, I do a search for •02.jpg. None found. Huh?
    Do a new search looking for just 02.jpg. Nothing. Huh?
    Do a new search. This time I copy-and-paste a file name: image-25.jpg. Nothing.
    I shouldn't need to mention that I have set the prefs correctly. I leave "Search For" alone and, instead, turn "Kind" into "Name" then add "Contains". Then I select the partition on which these files are contained.
    I even switched to Spotlight to see if anything is different. It is not.
    I tried a nifty utility I have, SpeedSearchX 2.3b3. But I think it looks only for text content, not file name.
    I tried File Buddy. This time, it works. So what the **** can be wrong with Apple's built-in tools and why does no one else report a problem?

    I gather you have not taken a look in the Spotlight forum:
    http://discussions.apple.com/forum.jspa?forumID=757
    You will find endless complaints about Spotlight and Find not finding files.
    If I do a search on 02.jpg Spotlight returns 499 results, such as 02.jpg, 02step02.jpg, 202.jpg, DSCN00002.jpg, and so on. If I do a Command-F search on my Data drive, with Name:Contains: 02.jpg I get 298 items with a similar variety of names.
    You should try reindexing the drive that is not returning results. Open Spotlight pane in System Prefs, click the Privacy tab, drag the offending volume into the list, wait a few seconds, then delete it from the list. Spotlight should reindex and then find things just fine.
    If it doesn't you can always use EasyFind:
    http://www.devon-technologies.com/download/index.html
    Scroll down to the second batch of goodies. It is free.
    Francine
    Francine
    Schwieder

  • IPod Touch 5th gen headphone jack and battery not working properly

    Yesterday my iPod touch 5th gen's battery started draning at an incredible rate. Won't last longer then 1 or 2 hours now. And add onto it the headphone jack stopped working properly. It's now only plays in one ear, it's all static over the sound it's supposed to play. I baby my iPod. This all happened out of the blue. What do I do to fix it?

    Saraa22 , the same recommendation was given over a year earlier:
    Try the following to rule out a software problem
    - Check also Settings > General > Accessibility > Hearing. Make sure that the sound balance is not set all the way to "R".
    - Reset the iPod. Nothing will be lost
    Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    Saraa22 wrote:
    If anyone has this same problem with their Ipod touch 5g headphone jack. I found a way to fix it. I did everything of the above but nothing actually worked . But this is what worked!
    First reset your Ipod by pressing down the on/off button and the home button at the same time for 10 seconds until you see the apple icon
    Then after it turns back on : Go to settings then press on general. Then press on accessibility  and scroll down and make sure MONO AUDIO is on!
    This will definitely fix the problem.

  • RH8 - TOC books won't collapse in output and search not working

    I'm working on a RH8 project with a second author. When I last generated the primary layout (Webhelp),
    I noticed that the TOC books will not collapse in the generated output.  Also, the Search feature is not
    working (Search field is not displaying).  (See ATTACHED IMAGES)
    Is there something in the Project Settings that could be causing this?  I am wondering if we somehow
    checked a setting that would force the TOC to stay open in the generated output?
    Also, I notice that the Search area seems to be displaying some index items and numbers?
    Anyone have any trouble-shooting ideas?   I do know that when you initially setup or open a new
    RH Project, you have to go through a series of dialogue boxes with various settings.  However, when
    you go to Project Settings, you don't see all of those settings...  so I'm not sure where to trouble-shoot this...
    Any suggestions welcome - thanks!
    Rachel   

    Look in the wizard when you generate the help. It looks like you have 508 compliant help turned on.
    See www.grainge.org for RoboHelp and Authoring tips
    Follow me @petergrainge

  • Mail search not working properly

    Just upgraded to ML and the search function in mail just isn't working properly, I didn't think the Lion mail search was great but this one seems 10 times worse. If I search for words contained within a message, the results only show messages from the last couple of months even though I know there's dozens of messages containing the same word from the last couple years.
    I tried repairing permissions and rebooting. Still same issue.
    If I manually open an old message, and then perform a search, that particualar message will get included in the results, but I can't open thousands of emails just for the search to index them.

    You should try rebuilding your Spotlight index, as that's what Mail uses.
    Go to Spotlight preferences, and drag your boot drive (probably called "Macintosh HD") into the privacy pane.  Say OK to the warning.  Then after about 10 seconds, remove it.  The whole drive will be re-indexed (this will take a couple hours) and then search should work again.

Maybe you are looking for