Document size too large

I can only view a full page document at 200%.  How do I make a full screen the standard 100%...???

Hi there
When you go to create a new document in Photoshop (File > New), you can specify the dimensions and resolution of the image, as shown below. You can also resize your document after creating it by going to Image > Image Size.
Having your document "fit perfectly" in your Photoshop window depends on several things: on the size of your application window, your monitor's size and settings, and the resolution of your image. But as was mentioned above, the magnification of the image is just a way to view your image - the file size that you specify really comes down to what you're using the image for.
For example, if I'm creating a 50x50 pixel icon for my website, Photoshop will automatically open my document at 100% since my image area is much smaller than my monitor resolution.
I can go to View > Fit on Screen which will cause my whole image area to fill my application window, but it will zoom it to 1520%. My image dimensions haven't changed, just the magnification of the image.
Please post again if you have further questions. You might also want to read through this Photoshop Help document on Image size and resolution.
Cheers!
Kendall

Similar Messages

  • Max Character File Size Limit exceeded.The document is too large to process

    Hi
    I have  made set on section on products in report.
    the Reports contains around 50 products when im opening the report
    in draft mode the following error is displayed
    "Max Character File Size Limit exceeded.The document is too large to be proceesed by the server .Contact your business Objects Administrator."
    can some body help me out how to increase my report character file size

    Hi,
      If you are using Business Objects XIR2, there is a performance parameter in the Web_Intelligence Report Server where you can increase the size of that file. The parameter is Maximun Character File Size. Go to the CMC>Server>server.Web_IntelligenceReportServer in the Properties tab you will see it.
    Cheers,
    Luigi

  • Cannot Convert PDF to Word because the "document is too large". What can I do?

    I am trying to convert a document to word from PDF, but acrobat.com keeps returning a message that the 'document is too large'. What are some our options?

    What's the size of the source doc?  ExportPDF conversions are limited to 100 MB.
    [topic moved to ExportPDF forum]

  • What can I do for "File size too large"?

    Spent 9 hrs creating a slideshow that I saved.  Closed PSE 11 and reopened and can no longer find the slideshow.  When I select Find, Media type, Project, nothing appears, but there is a gray box in my grid that says "File size too large".  Is this my slideshow and if so how can I recover it?  I am sick as this was a large time investment for my daughter's wedding which is very soon!  Please help if you can.

    I don't know anything about slide shows but if a picture is too large this is just a warning message, if I click a pic with this message it does show up. Have you tried clicking the thumbnail?

  • Subsequent debit in miro - Number of items in document is too large

    Dear Experts
    When i am doing subsequent debit in miro I am getting the eror "Number of items in document is too large" I have alreday posted invoice now i am doing subsequent debit .
    Please do the need full
    Regards
    San

    Hi,
    check this blog:
    ( Restriction of Maximum 999 FI Document Items During MM transactions )
    Restriction of Maximum 999 FI Document Items During MM transactions
    Best regards.

  • Individual cache size too large: maximum is 10TB

    Hi All,
    When application is trying to open environment the following error occur:
    individual cache size too large: maximum is 10TB
    All BDB parameters are default. Environment created with the following flags: DB_CREATE | DB_INIT_TXN | DB_INIT_LOCK | DB_INIT_LOG | DB_INIT_MPOOL | DB_THREAD | DB_REGISTER | DB_RECOVER;
    BDB version 4.8.24. OS Debian Linux 2.6.26-2-amd64
    What can cause this error?
    Modification of cache size in DB_CONFIG does not help.
    Thanks
    Edited by: user3578137 on Dec 17, 2009 7:54 AM

    No, cache parameters are not set, they are default. So it is strange.
    Here is the code:
    env_flags = DB_CREATE | DB_INIT_TXN | DB_INIT_LOCK | DB_INIT_LOG |
    DB_INIT_MPOOL | DB_THREAD | DB_REGISTER | DB_RECOVER;
    rc = db_env_create(&dbenv, 0);
    rc = dbenv->set_lk_detect(dbenv, DB_LOCK_MINWRITE);
    dbenv->set_event_notify(dbenv, db_event_callback);
    rc = dbenv->open(dbenv, work_dir, env_flags, 0);
    error checks are omitted.
    It works fine on machine with Fedora x64 and 1GB RAM, and error occurs on Debian x64 4GB RAM

  • -Xss: Stack size too large

    There is a requirement of high stack size in the application but when I try to set the stack size > 128m , I get the below error
    [ERROR] Argument error: -Xss130m
    [ERROR] -Xss: Stack size too large
    Could not create the Java virtual machine.
    Is there a upper limit of 128m on stack size. The Jrockit version is 64 bit.
    Please help

    Hi,
    Are you running OS in 32 bit or 64 bit.
    eg:
    O/S 32-bit Default 64-bit Default
    Windows 64 kB 320 kB
    Linux 128 kB 1 mB
    Please check your stack size you mentioned it is 128m please change to KB it will work.
    Regards,
    Kal

  • Help! VerifyError: stack size too large??

    I seem to have a class file with which the class file verifier has a complaint:
    D:\test\out>java Probe
    Exception in thread "main" java.lang.VerifyError: (class: Probe, method: main signature: ([Ljava/lang/String;)V) Stack size too large
    Can anybody point me towards documentation about what the algorithm is or should be to calculate the correct stack size. Or documentation on the message?
    I assume the meaning of the message is that the operand stack size is larger than used by the code for the static method main.  However, I haven't a clue as to the algorithm I should verify the size against. 
    Thanks for any help suggestions                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                       

    Thanks for the suggestion. I am running a modified Class file and have read the jvm spec. I was hoping somebody would have a suggestion as to what the error message actually means...
    For example does this mean that the declared size of the operand stack is greater than that required by the code? Or perhaps that the declared size is too large for the code?
    The actual method is quite small (on the order of 500 instructions).
    I know that the jvm has a requirment that the operand stack have the same size along all control paths (loops, gotos, etc) to a specific instruction. I don't know what error the verifyer would give if this was the problem.
    Is there any documentation anywhere the verifier's error messages?
    Thanks for any help you can give.

  • MP3 file size too large ?

    Hi all,
    I purchased the C3 to replace my older 6300 a couple of days ago.
    It seems that my C3 problem discussed in another topic is almost similar.
    I placed a 1Gb memory card and works just fine. I can approach and play all MP3 files on it.
    But the option to use an MP3 as a ringtone is greyed out.
    Tried to get it to work through personalizing profiles gives me the error message : file size too large ! Everty time and no matter which MP3 I choose. The file size is 4.3 Mb.
    I tried editing the file, downsizing it to 770 Kb, but same error message occurs : too large.
    Any other suggestions before I decide to bring this phone back ?
    Solved!
    Go to Solution.

    updates vary by region and product code and if your handset is branded you may have to wait a bit longer as the network has to aproove the update
    If  i have helped at all a click on the white star below would be nice thanks.
    Now using the Lumia 1520

  • I have installed yosemite yesterday and photoshop elements 12 doens't work anymore: it opens, I can change doc size but no more... also screen size too large

    Yesterday I have updated my mac with Yosemite since I try to work on PHOTOSHOP ELEMENTS 12 but I cannot go further than opening documents and changing size. Screen is also too large but with Yosemite no mean to adapt it with the screen menu...
    How can I recover the photoshop tools?

    Unfortunately there is no option in PSE to vhange the UI fonts (other than switching to System Font' in preferences. So traditionally changing the Windows display font size has been the only workaround, and even that can cause problems with individual menus disappearing and being replaced with a hard to spot  >> drop-down menu.
    If you have a dual-display system you could have the menus on the lower resolution screen with images on the hi-res.
    Cheers,
    Neale
    Insanity is hereditary, you get it from your children
    If this post or another user's post resolves the original issue, please mark the posts as correct and/or helpful accordingly. This helps other users with similar trouble get answers to their questions quicker. Thanks.

  • PDF file size too large

    Hi,
    I have a report (6i and 9Ids) which contains an image (stored as a blob in the database (8i)). The size of the image in the database (and as a file) is just 750k. The image is sized to fit on to the A4 report page. If I set the desformat of this report to PDF the resulting PDF output file is 10mb in size. I need to make this report available over the web so this is too large. Has anyone got any ideas as to reducing the output file size?
    I have tried the pdfcomp report parameter with no joy.
    Cheers
    Andy

    Hi Andy,
    The image you are using might be a JPEG image. In 6i and 9i, while generating the PDF file, Oracle Reports always converts the image to GIF and embed it. This image type conversion increases the file size of the outputimage and hence PDF file size increases. This is fixed in Oracle Reports 10g.
    In Oracle Reports 10g, you can select the outputimageformat based on your need, using either:
    1. commandline: OUTPUTIMAGEFORMAT
    (or)
    2. environment variable: REPORTS_OUTPUTIMAGEFORMAT
    If your image in the database is a JPEG image, set the outputimageformat to JPEG. Hence, there will not be any image type conversion and the PDF file will be very small.
    Please refer to the Publishing Reports manual to know more about the usage of these commandline/environment variable.
    Links:
    http://download-west.oracle.com/docs/cd/B10464_01/bi.904/b10314/pbr_cla.htm#644163
    http://download-west.oracle.com/docs/cd/B10464_01/bi.904/b10314/pbr_rfap.htm#644448
    Thanks,
    Regards,
    Siva B

  • Target File Size Too Large?

    Hello,
    We have an interface, that takes a Source File-> Transforms it in the Staging Area ->and outputs a Target File.
    The problem is the target file is way too large than what it is supposed to be.
    We do have the 'Truncate Option' turned ON, so its not duplicate records..
    We think its the Physical and Logical Lengths that are defined for the Target files.
    We think the logical length is way too large causing substantial 'spaces' between the data columns thereby increasing the file size.
    We initially had the Logical Length for the data columns as 12 and we got the following error:
    Arithmetic Overflow error converting numeric to data type numeric.
    When we increased the Logical Length from 12 to 20 the interface executed fine without errors. But now the target file size is just way too large 1:5
    Any suggestions to prevent these additional spaces in the target columns??
    Appreciate your inputs!
    Thanks

    Since 'File-system' does not have a property 'column length', ODI will automatically set a standard 'column length' according to the datatype of the column. In your case, as both your source and target is File, check the max length of each column in your source ( Ex: if your file is huge then open the file in excel and verify the lengths) and set the same 'Logical length' for your target file datastore.
    drop the temporary tables (set the 'delete temp objects' option to 'true' in the KMs) and re-run the Interface. hope this helps.
    Thanks,
    Parasuram.

  • .War file size too large on Sun One WebServer 6.1

    We are using Sun One Web Server 6.1. I am trying to deploy a .war file thru the admin interface, and it fails due to the .war file being too large (over 10 megs). I am new to this server and have been looking around to see if there is a config setting somewhere I can modify, but I can't find anything.
    Can anyone tell me if I can change the max size, and if so where?
    Thanks very much.

    Try this:
    Go to $SERVER_ROOT/bin/https/webapps/admin-app/WEB-INF/web.xml file and make a backup copy. Edit this file and in the servlet webappdeploy, insert an init param named maxUploadSize with a value in bytes specifying the maximum upload size. Example:
    <init-param>
    <param-name>maxUploadSize</param-name>
    <param-value>20000000</param-value>
    </init-param>
    Let us know how it goes.
    Thanks
    Manish

  • Font size too large on itunes summary page . Half the words are cut off.

    How to change font size on the itunes summary page? Currently font size is too large resulting in sentences being cut off.

    Did you increase the minimum font size?
    If you increased the minimum font size then try a lower setting (default is ''none'') as a too high value can cause issues like you described.
    Tools > Options > Content : Fonts & Colors: Advanced > Minimum Font Size
    Tools > Options > Content : Fonts & Colors: Advanced > "Allow pages to choose their own fonts, instead of my selections above"

  • Dual monitors: window size too large when opens in smaller monitor.

    I use Windows 7 with two monitors. When I open Firefox directly from my desktop, it opens on the larger monitor, and the window size is just fine. But if I click a link from an email, Firefox opens in the second, smaller monitor, and the window is too large for that screen.
    Please help me figure out how to either (a) make Firefox open with a smaller window; or (b) make Firefox open on the primary, larger monitor.

    oh,  forgot to say Mavericks   10.9.5    running on the mac pro..

Maybe you are looking for