Document size

Can Pages create an 11" x 17" document? If so, how do I create that size template? THANKS!

If the printer to which you are directing the output supports that paper size, the size will appear in the list in Page Setup.
Regards,
Barry

Similar Messages

Document size in quick look

Hi Community,
I installed a new Mac running Snow Leopard and now I have a small document size in quick look. I can change the size by drag and drop the lower right corner but a) the next document is in the same small size and b) when I reopen a document in quick look I adjusted the size before, it will be displayed also in the small size again. In other words the quick look doesn't remember the custom size setting.
Is there anywhere in the system a way to change the settings of quick look?
Thx & Bye Tom

Yes, I have the same issue, text is tiny on my large screen when previewing word or other text documents. The implementation of Quicklook for text could be improved. For images it obviously works great but for text, I would define a "quick look" as a quick scan of the contents, not just the layout, because its text. When you are editing HTML or looking at CVs a lot, you end up needing to read a little to see what the item actually is, as a lot of layouts are the same for these type of documents.

How to change Default document size for CC Library Graphics (InDesign)

Good morning --
I have just discovered the amazing uses of the CC Library setup in InDesign and would love to be able to use it as a tool to collaborate template galleries amongst coworkers.
I work in an industry that offers many different templates for our Marketing pieces available to the sales team. What we have in place right now is about 50+ different templates in their own packaged files. Now, this isn't all that difficult to maneuver around, but the CC Library has made it so I can "drag and drop" templates into place. This drag & drop feature is easy enough for me to grasp, and with the proper training it should be with the rest of the team (should being the keyword). However, in some cases if you double-click on Library graphic it opens the file in it's own editable file with a custom document size of 8.5x11 Portrait (which I imagine to be the internal InDesign preset).
My questions therefore are when I double click on the library "Graphics" can the document size be anything other than 8.5x11? Can each Graphic have it's own document preset?
- If I open a file that is set for landscape, all of the "Graphic" falls off of the spread.
- Some "eblasts" are much longer than 8.5x11 (sometimes as much as 8.5x20), thus knocking some of the "Graphics" into that weird space area.
Please let me know if I am not being a clear enough.
Thank you!
Steve

@Steve – you are totally clear what you are doing and what you like to do.
But I fear an automatic setting that is creating the page size according to an asset's size does not exist right now.
I can change the size of a new document beforehand, if no document is open and create a new size in the document's properties dialog with the keyboard shortcut alt + cmd + p (in my German InDesign on Mac OSX 10.7.5). But you have to know in advance what size that should be.
Example: If I chose A3 instead of A4 (my default) when no document is open and double click an asset in a CC Library the asset will be placed in a one page document sized A3.
1. Changing the size (no document is open) in my German UI of InDesign CC-2014.2:
2. Double click and the result is according to the settings I made:
Uwe

Using Scripts to detect document size in inches?

Is it possible that a script detects the document size in inches not in pixels?
Thanks for the help!

The size an Image will print is a simple calulation the numbet of Pixel Wide Devided by the imageg current DPI resolution. And numbet of Pixel High Devided by the imageg current DPI resolution. You can always change the DPI while maintaining the same number of pizels using Image Size with resample NOT checked to change the image's print size. All the information can be retrived in a script and the script can change the image's print size with or without resampling the image.

How to find out the Pixel Dimensions and Document Size of placed images?

Is it possible to find out the placed image details like Pixel Dimensions(Width,Height) Document Size(Width,Height) in illustrator through scripting. Kindly advice me with some examples.

http://www.adobeforums.com/webx/.3bbaa316.59b84fd8
I hope the snippet therein will get you started.
But after all, when you place an image via pi=layer.placedItems.add() it should pop in with its default dimensions, so that you have pi.height and pi.width ready.
Is this what you are aiming at?

Change default document size in PDF

The default document page setting in my PDF is set as 36"x24". I am not able to print the same in A4 even after making it ti fit to A4. ANy solution to change the default document size to A4

CreatePDF, perhaps? Try the forum at http://forums.adobe.com/community/createpdf

In MAC, I want to change document size from 8.5X11 to 18X24 to create a poster to print through Staples. I created the doc originally in WORD, changed the size in WORD, converted to PDF doc. But PDF doc is still in 8.5X11. Read ADOBE support help info. Te

In MAC, I want to change document size from 8.5X11 to 18X24 to create a poster to print through Staples. I created the doc originally in WORD, changed the size in WORD, converted to PDF doc. But PDF doc is still in 8.5X11. Read ADOBE support help info. Terls me to change size in application rather than printer. BUT ACROBAT Pro does not give me a page set up option in FILE. I can only find one in the printer dialog box. Help!

from the FAQs on Staples website:
I have a file that I know is a PDF, but the website claims it is not in a PDF format. What should I do?
Check to see that the file has the .PDF extension. Also, check that the filename does not have any special characters such as an ampersand (“&”).
Regarding your measurements set to centimeters rather than inches; is it just in MS Word?
Or does it occur in all other applications.
Check your Work preferences first:
If it is happening in all your applications, check your Mac OS System Preferences.

Copy & Paste From Illustrator to Photoshop not matching document size

I just recently reformated my computer and I've been having an issue with copy and paste from Illustrator to Photoshop. Before I could copy a 2"x2" vector box from Illustrator into photoshop making a new document and the size and resolution would match. That is the new document would say 2"x2" at 300 ppi in photoshop and the preset would read "clipboard". I would then hit ok and paste and it would match perfectly. Now since I've reformated, photoshop always creates a new document with the wrong size regardless of the settings I enter in Illustrator or photoshop. I have document raster and effects set at 300 ppi in Illustrator and I have the new document set at 300 in photoshop, but it always transfers the 2"x2" box as some other size no matter what resolution I change it too. Again this used to work before so I'm assuming there is some setting I forgot about. Does anyone know? The main issue is the clipboard preset is not matching the document size, its almost as if Illustartor is telling photoshop it's a different resolution when it's not. Copying to 72 ppi seems to have no issue, which makes me think Illustrator just isn't sending it out at 300 ppi, but I don't know why as I have the document set at 300 ppi.

Have you found an answer that wasn't posted here yet? I have the same issue.

Changing ppi changes pixel dimensions but not document size?

I have an image that is W=4.375 H=6.124 at 355 ppi the pixel dimensions area under Img > Image Size indicates it is W=1553 px H=2174
When I change the resolution to 72 px it is only changing the pixel dimensions and not the document size. I'm confuesed.
1. What is the difference between pixel dimensions and document size?
2. Is the document the same physical size regardless if I make it 200 ppi, 150 ppi or 72?
Thanks.

Let me see if I understand all of this:
- If I change the resolution the print dimension will stay the same, though what is it actually doing to the image if I increase the resolution, though it still is the same print dimension? I am guessing you can not just add pixels to a given size image and expect it to print better.
- If I change the dimensions, the resolution will change because there will be either more pixels for a smaller area or fewer pixels for a larger area, depending on how I size it.
Thanks.

Changing Resolution and Document size

Hello - I have a jpeg from a digital camera that I Saved As photo.psd with an original Document Size of 44" x 66" @ 72 ppi resolution.
I am using CS3 and I want to prepare the photo for printing while maintaining the highest quality possible. The first thing I did was uncheck Resample Image. Then I changed the resolution to 300. This gave me a Document Size of 10.56 x 15.84.
I want to enlarge the Document Size to 16" x 24" (the same proportions). So, it seems to me that the next step is to now check Resample Image and put in my new Document Size of 16" x 24". I would then apply some Unsharp Mask as desired.
So, should Ifollow the steps above or do you recommend a different workflow?
I've read that Photoshop will upres very well up to 200% and all I need is 166%, so it should work ok. Also, do you recommend standard Bicubic or Bicubic Smoother?
TIA

What you're suggesting will work, though you don't really need to do it in multiple steps. One step, with resampling checked, once you set all the fields as you want, will do the trick.
And for all the hype and mystery surrounding the two alternate choices for resampling, in all my work for minor resampling I always find I prefer Photoshop's original Bicubic method. For extreme upsampling I prefer, personally, a plug-in called Genuine Fractals.
Also, modern print drivers are getting very good at size matching... If the image quality in your file is to your liking, you COULD just set the print size in inches (without resampling) and be done with it. This would yield an image at a resolution lower than 300 pixels/inch, but would save you some work, and it may very well be that you will not be able to see any difference by letting the driver do the resampling as needed.
-Noel

Default Document Size

I recently was working on a design for a #10 commercial envelope in InDesign. Ever since then, it seems that #10 envelope has become the default document size that InDesign selects when I create a New File. How can I change the default new document settings?

Jongware: "You change the default for new documents the same way as just about everything else in InDesign: change it with no documents open. In the case of a default new document size, close all documents, then call up the Document Setup dialog. Set you size and OK the dialog. Done."
I don't get that behavior. If I call up Document Setup, set the size, and OK the dialog, then close the document, the new setup is not saved. I think it's better to call up Document Setup, set the size, and then click the Save Preset button; save the Preset as [Default] in the pop-up menu so that it overwrites the previous Default setting.

Change Default Document Size Attribute

I understand that I can make a custom attribute that displays the size in KB, MB, etc -
But I want to know how to edit the default Document Size attribute - surely that is possible?

@Steve – you are totally clear what you are doing and what you like to do.
But I fear an automatic setting that is creating the page size according to an asset's size does not exist right now.
I can change the size of a new document beforehand, if no document is open and create a new size in the document's properties dialog with the keyboard shortcut alt + cmd + p (in my German InDesign on Mac OSX 10.7.5). But you have to know in advance what size that should be.
Example: If I chose A3 instead of A4 (my default) when no document is open and double click an asset in a CC Library the asset will be placed in a one page document sized A3.
1. Changing the size (no document is open) in my German UI of InDesign CC-2014.2:
2. Double click and the result is according to the settings I made:
Uwe

Resize a layer to a percentage of the document size and position in corner

I need to create a script that places a logo in the corner of my main document but i need the logo to be constrained to a percentage of the document size. my logos needs to live in the bottom right corner of my images and be no larger than 28 percent height and no larger than 60 percent of the width of the document. i need it to constrain proportions of the original file so if the logo is square it will remain square, or if it is more rectangular it will maintain its rectangular shape. Heres what i've come up with so far, i am pretty inept at scripting so if disregarding my current script is more helpful than building upon it please ignore mine:
if ( documents.length > 0 )
    var originalDialogMode = app.displayDialogs;
    app.displayDialogs = DialogModes.ERROR;
    var originalRulerUnits = preferences.rulerUnits;
    preferences.rulerUnits = Units.PIXELS;
    try
        app.activeDocument = app.documents[0];    //set active document to 2nd document
        var docRefOne = app.documents[0];
        var refWidth = docRefOne.width;
        var refHeight = docRefOne.height;
        app.activeDocument = app.documents[1];    //set active document to 2nd document
         var docRef = activeDocument;
        //current image dimensions
        var w = docRef.width;
        var h = docRef.height;
        activeDocument.selection.selectAll();
        docRef.selection.copy();   //Copy selection
        app.activeDocument = app.documents[0]; //set first document as active document
        var docRef = activeDocument;
        activeDocument.selection.selectAll();
       docRef.paste(true); //paste into selection
    catch( e )
    // An error occurred. Restore ruler units, then propagate the error back
        // to the user
        preferences.rulerUnits = originalRulerUnits;
       app.displayDialogs = originalDialogMode;
        throw e;
    // Everything went Ok. Restore ruler units
    preferences.rulerUnits = originalRulerUnits;
    app.displayDialogs = originalDialogMode;

You could do something like this...
#target photoshop
activeDocument.suspendHistory('Logo Resize', 'main()');
function main(){
if(!documents.length) return;
var startRulerUnits = app.preferences.rulerUnits;
app.preferences.rulerUnits = Units.PIXELS;
var myDoc = activeDocument;
/////////////////////////////// Amend to suit /////////////////////////////////
var Opacity = 100; /* Opacity of logo */
//Position logo   X,Y
var X = myDoc.width - 10; //Right side of logo
var Y = myDoc.height - 10; //Bottom of logo
var Logo = File(Folder.desktop + "/logo.png"); //logo
if(!Logo.exists){
    alert("Your logo '" + decodeURI(Logo.name) + "' does not exist!");
    app.preferences.rulerUnits = startRulerUnits;
    return;
placeFile(Logo);
var LB = myDoc.activeLayer.bounds;
var docHeight = myDoc.height;
var docWidth = myDoc.width;
var LHeight = Math.abs(LB[3].value) - Math.abs(LB[1].value);
var LWidth = Math.abs(LB[2].value) - Math.abs(LB[0].value);
if(LWidth > LHeight) {//Landscape logo
var Percent = 60; /* Resize logo to percentage of smallest side of doc */
if(LWidth < LHeight) {//Portrait logo
var Percent = 28; /* Resize logo to percentage of smallest side of doc */
if(LWidth == LHeight) {//Square logo
var Percent = 15; /* Resize logo to percentage of smallest side of doc */
var percentageHeight = ((docHeight/LWidth)*Percent);
var percentageWidth = ((docWidth/LWidth)*Percent);
if(docWidth < docHeight){
myDoc.activeLayer.resize(percentageWidth,percentageWidth,AnchorPosition.MIDDLECENTER);
}else{
myDoc.activeLayer.resize(percentageHeight,percentageHeight,AnchorPosition.MIDDLECENTER);
var LB = myDoc.activeLayer.bounds;
X = X - LB[2].value;
Y = Y - LB[3].value;
activeDocument.activeLayer.translate(X,Y);
activeDocument.activeLayer.opacity=Opacity;
app.preferences.rulerUnits = startRulerUnits;
function placeFile(placeFile) {
var desc = new ActionDescriptor();
desc.putPath( charIDToTypeID('null'), new File(placeFile) );
desc.putEnumerated( charIDToTypeID('FTcs'), charIDToTypeID('QCSt'), charIDToTypeID('Qcsa') );
var desc2 = new ActionDescriptor();
desc2.putUnitDouble( charIDToTypeID('Hrzn'), charIDToTypeID('#Pxl'), 0.000000 );
desc2.putUnitDouble( charIDToTypeID('Vrtc'), charIDToTypeID('#Pxl'), 0.000000 );
desc.putObject( charIDToTypeID('Ofst'), charIDToTypeID('Ofst'), desc2 );
try{
executeAction( charIDToTypeID('Plc '), desc, DialogModes.NO );
}catch(e){}

Document Size v Paper Size

I am using Acrobat Pro 8 with a HP 3050 all in one. I am attempting to print two forms I created from scanned images (that have form fields) that are irregular sizes. I am only printing the form fields and not the scanned image, so my print setting is set to "form fields only". However, my form fields are not aligning with the documents I am feeding through the printer and I've noticed that there is a "document" size and "paper" size of two different sizes in the printer dialog box and have no idea why.
For example, at the bottom right of the print dialog box, the paper size says 7.0" x 3.4" (the correct/actual size) but the document size is saying 7.5 x 3.9 (not sure where this size is coming from). When I use the rulers to measure it in Acrobat, it says 7.0" x 3.4", yet when I print it out, the text is out of alignment and treating the document as if it is 7.5 x 3.9. The same thing happens with another document that I'm attemping to do the same thing with. In the print dialog box, the document size is saying 5.5" x 3.1" and the paper size is saying 5.8 x 3.9.
Is there any way to over ride or change this? I suspect it's somehow due to the HP print driver. If there's an alternative to accomplish what I'm doing, I'm open to any suggestions. I am using preprinted forms that I'd like to have fed in the printer. I don't necessarily want to re-create them in InDesign or Illustrator (I originally scanned the forms using Acrobat).
Thank you.

@Bill@VT - Sorry, that didn't work with either form I'm using. It is not allowing me to enter a custom size. It is
defaulting to a 8x13 (custom) size.

Export to PDF ignores document size settings?

I have several documents in InDesign CS4 and when I export them to PDF the document size changes.
I have set all the following options to A4 (210x297mm):
In Indesign: File->Document Settings
In Windows->Printer settings->Adobe PDF->Paper Size
After exporting and opening in Reader 9 the document size has changed to 210 x 303.3mm
This then requires a tweak before the first print run.
I should be able to just export to production and they can print from the PDF without checking the settings!
What have I missed?

I am using the export option not printing to PDF.
The summary reads as follows
Description
    [Based on 'Box Labels'] [Based on '[High Quality Print]'] Use these settings to create Adobe PDF documents for quality printing on desktop printers and proofers. Created PDF documents can be opened with Acrobat and Adobe Reader 5.0 and later.
PDF Preset: Box Labels
Compatibility: Acrobat 8 (PDF 1.7)
Standards Compliance: None
General
    Pages: All
    Spreads: Off
    Generate Thumbnails: Off
    Optimise PDF: Off
    Create Acrobat Layers: Off
    Export Layers: Visible Layers
    Include Bookmarks: Off
    Include Hyperlinks: Off
    Export Nonprinting Objects: Off
    Export Visible Guides and Baseline Grids: Off
    Create Tagged PDF: Off
    Include Interactive Elements: Off
    Multimedia: N/A
Compression
    Colour Images
        No Sampling Change
        for images above: 450 ppi
        Compression: None
        Tile Size: N/A
        Quality: None
    Greyscale Images
        Bicubic Downsample at: 300 ppi
        for images above: 450 ppi
        Compression: Automatic
        Tile Size: N/A
        Quality: Maximum
    Monochrome Images
        Bicubic Downsample at: 1200 ppi
        for images above: 1800 ppi
        Compression: CCITT Group 4
    Compress Text and Line Art: On
    Crop Image Data to Frames: On
Marks and Bleeds
    Crop Marks: Off
    Bleed Marks: Off
    Registration Marks: Off
    Colour Bars: Off
    Page Information: On
    Page Mark Type: Default
    Weight: 0.25 pt
    Offset: 2.117 mm
    Use Document Bleed Settings: Off
    Bleed Top: 0 mm
    Bleed Bottom: 0 mm
    Bleed Left: 0 mm
    Bleed Right: 0 mm
    Include Slug Area: Off
Output
    Colour Conversion: No Colour Conversion
    Destination: N/A
    Profile Inclusion Policy: Include RGB And Tagged Source CMYK Profiles
    Simulate Overprint: N/A
    Output Intent Profile Name: N/A
    Output Condition: N/A
    Output Condition Identifier: N/A
    Registry Name: N/A
Advanced
    Subset Fonts Below: 100%
    Omit PDF: Off
    Omit EPS: Off
    Omit Bitmap Images: Off
    Transparency Flattener Preset: N/A
    Ignore Spread Overrides: N/A
Security
    N/A
Warnings

Problems with copy and paste document size

Using Adobe illustrator I have been copying images from a .pdf and then pasting in photoshop having made an action script which does : -
>Make New document
preset clipboard
>Paste
with aa
as: smart object
center: center
Translate 0, cm , 0cm
>Save
As JPEG
Quality 12
Matte: none
In E:/my documents....
with copy
most of the time it works but occasionaly pasting into photoshop the clipboard size is wrong it makes it much much smaller,
even if i bypass using the script and copy from illustrator and in PS try Ctrl N and Ctrl V.
Sometimes also clipboard isnt even selectable it wants to use a specific document size.
The only way I can fix it is close down Ai and PS, launch Ai and PS, copy in Ai then in PS press Ctrl N for New, choosing clipboard, Ctrl V to paste enter to confirm, then it seems happy and I can then carry on using my Actions or manually pasting to my hearts content.
My question is what is causing it to have this quirk, how can I avoid it if possible or is there no avoiding it?

>> How can I have dreamweaver hold format with
different tabs and bullets
Generally a bad idea. Word's HTML formatting is notoriously
flawed. And,
HTML doesn't allow tabs. You probably need to take time to
learn (X)HTML &
CSS before going further. You seem to be headed for disaster
if you expect
to just grab text from Word and plop it into a web page with
good results.
Web pages are in an entirely different world than Word docs.
Walt
"sablowers" <[email protected]> wrote in
message
news:fn5ag2$mvv$[email protected]..
> Hi Everyone
>
> I am looking for some help when I copy and paste my word
document into
> dreamweaver it does not hold the format even through I
have paste full
> formatting selected. How can I have dreamweaver hold
format with different
> tabs
> and bullets
>
>
>

Document size

Similar Messages

Maybe you are looking for