Document Status not changing when document approval procedure in SOLAR01/02

Here is my situation:
We created and assigned a Status Schema for Solution Manager Document and to that status assigned a signature strategy. We have defined the following end results  for the signature strategy, when the process is initiated:
   FROM               TO
Copy_editing -> in_progress
In_progress ->  Reviewed
Reviewed -> Released
We initiate the process and the author performs the first signature, so the outcome expected is for the strategy to change the status from copy_editing into in_progress so on and so forth.
This is not happening and the document stays in copy editing throughout the approval process.
Any ideas? I can provide the complete configuration done in order to see if we missed something.

are you using digital signature? Yes we are using Digital Signature since we want to have the correct approval once a document is loaded and reviewed.
In case not, you do not have to create a signature strategy, but only an approval scheme.
Did you assign the approval scheme to a document type? Yes we have.
What happens, if a user tries to changes the status using the document attributes? currently it doesnt allow you to manually change it once the document is saved but this is what happens in detail.
1. I load the document into solman.
2. based on the digital signature and doc strategy the Author needs to Sign the document once the save button has been clicked.
3. The strategy defined states that the document will start as copy_editing and when singed it will go into in_progress.
This is not happening.
When I load the document I can actually change the status as always as I dont save the same.
Here is the document Strategy configuration we have set:
Status              init    Seq low   high    Dig Sig               End stat                     Cancelled stat
COPY_EDITING      X      10 10     20     ZTECHENT     IN_PROGRESS         COPY_EDITING
IN_PROGRESS      X      20 10     30     ZTECHAPP     REVIEW                  IN_PROGRESS
REVIEW              X      30 20     40     ZTECHAPP       RELEASED          REVIEW
RELEASED      X      40 30     40                          RELEASED

Similar Messages

  • Presence status not changed when using Lync 2010 Remote Call Control

    Hello,
    I'm currently testing the Remote Call Control functionality of Lync 2010. Call management works fine but I'm surprised that my presence status does not change to "In a Call" when the call is established.
    OriginatedEvent, DeliveredEvent and EstablishedEvent are forwarded correctly to Lync Client 2010. All responses are "200 OK".
    Is there something more to send to Lync Server 2010 so the status of the Lync Client gets correctly updated to "In a Call" ? Or is a plugin for the Lync Client necessary to achieve this ?
    Thank you in advance,
    Martin

    I think there's something missing from your scenario and I don't believe you would need a plugin for this.  It's been forever since I've set up RCC with Lync 2010 however.  I know this isn't what you're looking for, but I've used this product in
    the past to configure Lync and RCC with third party PBXs that don't support Lync/RCC but do have a TAPI interface.
    http://www.estos.com/products/drivers-middleware/callcontrolgateway400.html I've been able to get a free trial before and it worked like a charm for an old 3COM phone system.  If you can get a trial it might help you compare apples to apples provided
    you have a TAPI driver for your PBX.
    For more details on what happens behind the scenes, you might have some better luck in the MSDN dev forums:
    http://social.msdn.microsoft.com/Forums/en-US/home?category=uc
    Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question please click "Mark As Answer".
    SWC Unified Communications
    This forum post is based upon my personal experience and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

  • Message read status not changing (when changed on the server)

    I have Mail set up to for Gmail using IMAP. I also have my iPhone set up for Gmail using IMAP. When a message gets marked as being read (either by reading it in Gmail, Mail or my iPhone) Mail does not update the status to read. If I read the message on Gmail or in Mail my iPhone updates the status to read. Shouldn't Mail update the status of the message to read when it changes on the server?

    Try - https://www.cibc.com/ca/personal.html
    https://cibc.com is not the same as https://www.cibc.com <br />The certificate is only valid for https://www.cibc.com , not https://cibc.com

  • Status Profile : Status not changing in CRM

    Hi Gurus
    Created order with  header status as  as " In process" ,  item status is defaulted  to  " open"  and  order  replicatd to ECC ,  billed aswell .  But  when I checked in  CRM still status  not changing to completed  but retains with In process  at header level & open at item level.
      I would expect order status should be completed at header level & Item level.
    Is there any thing wrong with status profile settings at header  & Item level? , I have created  status profiles with following settings.
    I have  copied standard status profile  " CRMORDER" and assigned to  trasaction type  and made following settings:
    Under Open :   following transactional contorl selected
    To be distributed   :  Selected options "Forbidden " & No active
    Under In process: 
    In process : Selected options " Allowed " & Set
    Undo Rejection :  Selected options " No infulence " & Set
    Under Completed:
    Complete :  Selected options " Allow " & Set
    Created status profile for Item  i.e. copied standard CRMORD_i  and made following changes:
    Under Open : No transaction control selected
    Under In Process : 
    Edit :  Seleted options " No influence" & Set
    Undo Rejection : Selected options " No Influence & Set
    Under Completed:
    Completed :  Selected options " Allowed & Set"
    Rejected :  Selected options " Allowed & Set"
    Actually we are using material which is non deliverable but should be billed, while creating order , I can see staus at item level is open and remains open even after billed in ECC. And also we are mapping  Business activity reasons to order reasons in ECC.
    Is any thing i am selecting wrong options in status profile at header level & item level?  Much appricieated for solution.
    Thanks
    shash

    Hi Gurus
    Created order with  header status as  as " In process" ,  item status is defaulted  to  " open"  and  order  replicatd to ECC ,  billed aswell .  But  when I checked in  CRM still status  not changing to completed  but retains with In process  at header level & open at item level.
      I would expect order status should be completed at header level & Item level.
    Is there any thing wrong with status profile settings at header  & Item level? , I have created  status profiles with following settings.
    I have  copied standard status profile  " CRMORDER" and assigned to  trasaction type  and made following settings:
    Under Open :   following transactional contorl selected
    To be distributed   :  Selected options "Forbidden " & No active
    Under In process: 
    In process : Selected options " Allowed " & Set
    Undo Rejection :  Selected options " No infulence " & Set
    Under Completed:
    Complete :  Selected options " Allow " & Set
    Created status profile for Item  i.e. copied standard CRMORD_i  and made following changes:
    Under Open : No transaction control selected
    Under In Process : 
    Edit :  Seleted options " No influence" & Set
    Undo Rejection : Selected options " No Influence & Set
    Under Completed:
    Completed :  Selected options " Allowed & Set"
    Rejected :  Selected options " Allowed & Set"
    Actually we are using material which is non deliverable but should be billed, while creating order , I can see staus at item level is open and remains open even after billed in ECC. And also we are mapping  Business activity reasons to order reasons in ECC.
    Not sure whether i am  selecting wrong options in status profile at header level & item level? 
    Plz help me on this.
    Thanks
    shash

  • Visited link color is not changing when there is no page redirection

    Visited link color is not changing when i just open a popup on clicking the hyperlink.. whereas visited link color gets changed when i redirect to a new page on clicking the hyperlink
    I want to have my visited link color to change even if i show a popup on clicking the hyperlink
    This works fine with IE..

    Hi,
    Have a look at the user status table TSOCM_STAT_PROP and see if there are any unwanted PROCESS_TYPE <> STSMA combinations.
    For your process type there should only be one kind of status schema assigned.

  • View only works in one direction,will not change when I turn the phone

    view only works in one direction,will not change when I turn the phone

    Is the rotate lock on?
    http://appletoolbox.com/2013/03/iphone-ipad-or-ipod-screen-will-not-rotate-fix/

  • Preference status not changed for the processed products

    Hello All,
    While Aggregating the vendor declaration, I am getting the message as below
    Preference status not changed for the processed products
    Could you please help me to resolve this issue.
    Thanks & Regards
    Rahul

    Hello Rahul,
    aggregation is not changing status on LTVD. (Possibly LTVD has been already agregated). Newly maintained LTVD is not changing status of the product, its remaining negative whatsoever.
    Kr,
    Gabriel.

  • Colors in parade do not change when I move the Temperature slider.

    I am trying to do the speed grade tutorial, but the color does not change when I move the temperature slider.

    It might be nice to know which "issue" of Sg you're using.There have been issues where the colors "lag" while using a slider/control, but typically when you let "up" on the control, the adjustment is "there". From your comment, am I correct in assuming that the controls simply don't do anything even after you've moved them? And of course ... when you "move" them, you do see the indicator on the slider-line move, right?
    Neil

  • The display on my iPhone only works vertically.  It will not change when I rotate my phone.

    The display on my iPhone only works vertically.  It will not change when I rotate my phone.

    Swipe up on the bottom of the screen to expose control center and see if the orientation lock is on (top row of controls, far right; looks like a lock with a circular arrow).
    Not all apps support orientation changes, BTW.

  • Look for a progarm that will let me have 2 moniters but one will lock on and will not change when using spaces

    look for a progarm that will let me have 2 moniters but one will lock on and will not change when using spaces

    ok so i have one moniter to the right of me and i want to keep my google chrome on that one but still be abel to use space on the many monter. cuz when you go to spaces it movies both moniter i hope that help and i hope that you can help me.

  • TS2771 on i pod touch the orientation does not change when I turn it on it's side when using safari etc.  When viewing youtube it only displays widescreen and will not display portrait , anyone any ideas? is this a fault or do all ipod touch do this?

    On i pod touch the orientation does not change when I turn it on it's side when using safari etc.  When viewing youtube it only displays widescreen and will not display portrait , anyone any ideas? is this a fault or do all ipod touch do this?

    The user guide says:
    Movies viewed in Videos and YouTube appear only in landscape orientation. Street views in Maps
    also appear only in landscape orientation.
    Do you have the scree orientation lock turned on? If on there is a circular arrow icon with a padlock inside next to the battery charge icon in the upper right.

  • How do I check internet usage history? When i use the "History" tab on the tool bar all I see is today's activity & the calendar does not change when I click on it. Thanks

    How do I check internet usage history? When i use the "History" tab on the tool bar all I see is today's activity & the calendar does not change when I click on it. Thanks

    zedzed,
    Here's another thought.
    Navigate to HD > Users > Library > Safari: Make a duplicate of History.plist.
    To duplicate the file, click once to highlight it. Press the Command + D keys.
    Drag the History,plist copy file to the Desktop.
    Highlight it. Press the Command + I keys, to get info.
    Change Open With to TextEdit.
    When you open the file in TextEdit, it will be difficult to read, but you will be able to pick out some sites.
    ali b

  • Posting date changes when I approved a Funds reservation

    Hello experts,
    When I approved a Fund reservation in SAP business workplace, system creates a Accounting document with a different posting date.
    I give you an example:
    Funds reservation:
    Document number: 1101000099
    Document type: R0
    Document date: 01.08.2011 (day.month.year)
    Posting date: 04.08.2011 (day.month.year)
    Accounting document
    Document number: 1000000916
    Fiscal year: 2011
    Period: 08
    Doc. Date: 01.08.2011 (day.month.year)
    Posting date: 29.08.2011 <<<----
    ?¿?¿?¿? Why sy-datum ??
    Maybe a SAP error ?? Do you know where SAP (abap code) determine posting date??
    I need posting date of accounting document is equal to posting date of funds reservation.
    Note: If I created a funds reservation with posting date 31.12.2011 and then I approve it, system creates accounting document with posting date correct! (31.12.2011)
    A lot of thanks in advance.
    Best regards,
    djlu.
    Edited by: djlu on Aug 30, 2011 12:27 PM
    Edited by: djlu on Aug 30, 2011 12:45 PM
    Edited by: djlu on Aug 30, 2011 12:49 PM

    Hello gautam maini,
    First of all a lot of thanks for your quick answer.
    My BO is ZFMRE a custom objecto of FMRE.
    Methods: I don't know which method exactly but I think zfmre.Approve_1 or zfmre.Approve (standard methods)
    Workflow: WS90200003 / WS99800014
    SAP Version: SAP ECC 6.0
    Sorry but I am not a workflow expert.
    Please give me your suggestions.
    Thank you in advance.
    Best regards.
    djlu.

  • BOM item qty does not change when header qty changes in Outbound Delivery

    Hi,
    We are using sales BOM and exploding it in Sales Order.  ( Item category of components as TAE )
    I am creating a delivery with reference to  a sales oder ( i have maintained copy controls to copy header and item data). Now when i change BOM header quantity in delivery document system is  not redeterming the components quantity , item quantity of the components does not change.
    Please let me how can i control item qunatity when BOM heade quantity changes in outbound delivery document
    Thanks
    Venkata Rama Reddy.K

    Hello Venkata,
    The components item category is TAE, that means the item category for the header item will be TAQ. Also the pricing will be carried out at the header item level only.
    Now for your query:
    The standard item category controls of TAQ will not have any connection between the header & the item level quantities in the delivery. If you change the quantity of the header item in the sales order, the quantity of the compnenets will be automatically adjusted. But this will not happen in the delivery with the normal settings of TAQ.
    Solution:
    Go to transaction code VOV7 - select TAQ - double click - In the Bill of Material/Configuration section , there is a field "Create Delivery Group" - select "X - Form delivery group with one delivery date".
    Save the settings. Now create a new sales order & then create the delivery & try to change the quantity of the header item, the system will automatically change the quantity of the components. (the system may not change the quantity of the components in the delivery of the old sales order - change it manually)
    With best regards,
    Allabaqsh Patil.
    Idhasoft Ltd.

  • Email/print in status "Not processed" when RFQ is published

    Hello,
    We are running SRM 5.0.
    We have set up the event schema for BUS2200 (RFQ) to react on events: PUBLISHED, PUBLISHED_AGAIN etc. And assigned the event schema to RFQ's transaction types, eg BID.
    However, when an RFQ is published, the email is not sent to vendor (whose default medium is MAI) or printed on vendor's default printer (if the medium is set to PRN). The output log under bidder/bids tab shows something like :
    Status: Not processed       
    Medium: Print      
    When I clicked on the action button "Output pushbutton", the status would be changed to "Successful" and the email would be sent or the print job would be printed then.
    I have checked the PPTTRIGG table and all the entries in there are of DISPATCH = 1 or 4. Not 3, which seems to indicate an "immediate processing".
    My question is how I would configure the system so that the email/print when the RFQ is published could be processed immediately.
    Thanks.

    Hello Masa,
    I realized it as well. I was then a little puzzled why SRM didn't allow "immediate processing" for the "processing time" parameter in the action definition. Do you know if there is a particular reason for that?
    Thanks,

Maybe you are looking for

  • Unable to access any file on my iPod after a problem with a pics transfer

    Hi, I was downloading the pictures from my camera to my iPod video 30Go when something happened. After that, I was (and still am) unable to play music or watch movies or the pictures in the library. Actually, all the names still remain but when I sel

  • Scrolling in video

    Dear community and hopefully apple members aswell. I have a problem concerning my ipad mini. when i want to watch a html5 video posted on a website , i can only scroll in the video for about the first 5 minutes. if i want to move to a 10 min point in

  • SQL Developer 2.1 editor settings

    In SQL Developer 2.1, when I single click on a pl/sql object in the navigation pane, a writable editor tab opens. How can I change this behavior so that it opens as read-only? I only want the pl/sql editor to be writable if explicitly selected. I cou

  • Force exponential window in sound&vibration toolkit

    hello, I work on shock acquisition and analysis. I would like to use a window "force exponential" before computing fft. But I don't find the vi to do it directly in sound&vibration toolkit and VI express toolkit.  So I try to do it by using the VI in

  • Integrated JDeveloper Weblogic 12C issues

    Hi, I'm running Jdev 12.1.2.0.0 (JDEVADF_12.1.2.0.0_GENERIC_130608.2330.6668) on a mac OSX 10.9 and I'm having problems with the integrated Weblogic starting up. I've tried it on multiple versions of java 7 (update 21, 25 and 45) with no effect. I've