Document Summarization for Materials Management
Hi All,
There exists FI configuration for Document summarization for Material Management .
My question is when running MB5B transaction how does it get trigerred and why this message does not appear for all materials in MB5B.
Actually ,I am getting warning message for one particular material only and not for all materials while running MB5B.
Message : "FI document summarization is active /The results may be incorrect"
Thanks In Advance
Payal Saxena
Hi Kiran
It means that document summarization happens automatically once MIGO ,MB01 ,GR etc is being made.
But ,I have not changed any settings,then how did it became inactive for this particular material .Is there any way to find out the reason.
I am unable to understand this.
Regards
Payal
Similar Messages
-
Acct determination for Materials management small differences with keys
Dear all,
While posting a document in MIRO, it throws error as 'Acct determination for Materials management small differences with keys not defined in ch/acts'.
Please advise a solution to rectify this error.
Regards,
VijayHi,
It seems due to small differences between debit and credit side you are not able to post the document price differences). Check all the data to create an entry first and Check the data format. Can you check in OBYC is there a way to have a transaction DIF (Materials management small differences) post to different GL accounts based on valaution class (plant)? -
FI Document Summarization for SD Billing Documents
Hi Gurus,
Appreciate if you can please let me know the configuration and process of FI Document summarization for sd billing documents where, there are more that 10000 line items in one billing document. And how can we do clearing of multiple accounting documents against one billing document when we recieve payment.
Thank YouHello,
The summarization of FI items for SD billing documents are done in transaction OBCY. The steps to configure it is explained in note 36353:
1) Enter in transaction OBCY
2) Inform Reference Transact. VBRK
3) Add the following fields:
BSEG MATNR
BSEG MEINS
BSEG MENGE
BSEG PAOBJNR
BSEG POSN2
BSEG VBEL2
BSEG WERKS
Be informed that the content of those items will be deleted in FI document.
The information above will help you to configure summarization of FI items for SD billing documents.
Kind regards,
Cintia. -
Defining Accounts for Materials Management
Dear sir,
Now, I have to Define Accounts for Materials Management, but I dont know what are procedure or group to match my account number. Can you explain the definition of following procedure:
Expense/revenue from consign.mat.consum
Expense/revenue from stock transfer
Subsequent settlement of provisions
Subsequent settlement of revenues
Provision differences
Inventory posting
Change in stock account
Inventory posting
Revaluation of other consumables
Del credere
Materials management small differences
Purchase account
Purchase offsetting account
Offsetting entry for inventory posting
Account-assigned purchase order
MM exchange rate rounding differences
Differences (AVR Price)
Cost (price) differences
Price Differences (Mat. Ledger, AVR)
Price differences (cost object hierarc.)
Price Diff. from WIP Written Off (Mat.)
Product cost collector price differences .....
Many other, but you can explain some and give me example, and step by step giude me setup
Thank you very much
Faithfully,
HangvtHi,
Some of the companies are having a practice of paying payables with the rounding off rules. This rounding of in India could be from Rs.0.01 to Rs.10.00. For examble, there is a payable amount of Rs.125125.25 this can be rounded off to Rs.125125.00 or Rs.125130.00 while making payment. The balance amount should hit the rounding off difference account.
The same things is applicable for receivables also.
Over/under payment GL can be configured by using T Code OBXL
There is an another use, for details see the below link,
http://help.sap.com/saphelp_47x200/helpdata/en/01/a9b9a6455711d182b40000e829fbfe/frameset.htm
There may be some more reason where you need to do this configuration,
Disc. difference
Incorrect cash discount rate
To be paid without deduction
Credit memo without backdated cash disct
Cash discount period exceeded
Reduction without doc.number allocation
Incomplete payment advice note
Payment amount is different
Debit reduced not paid
Debit reduced not paid
Reduced twice
Paid not reduced
Damaged goods - disputed
Goods damaged during transport
Quant.delivered not same as order quant.
Freight charges not paid
Miscellaneous deductions
Price variances - disputed
Partial payment
Returns
Residual item creation
Trade Promotion
Payment differences on debit side
Hope it clears your doubt.
Regards
A.Saravanan. -
Document Summarization for External Accounting Documents - ECC 6.00
Hi All,
I would like to know about the Document Summarization for external accounting documents in controlling. please can anyone suggest when we have to use this in ECC 6.00.
Regards,
PranavHi,
Please see note 1070629 - FAQs: New General Ledger Migration
https://websmp204.sap-ag.de/~form/handler?_APP=01100107900000000342&_EVENT=REDIR&_NNUM=1070629&_NLANG=E
Extract :
77. How can I deactivate classic Profit Center Accounting (EC-PCA) after activating the new General Ledger?
Note 702854 explains how to deactivate classic Profit Center Accounting.
If you use document splitting for profit centers in ERP2004, delete the dummy profit center from the table TKA01 also. For this purpose, Note 702854 provides the program Z30PCA23. Use the program Z30PCA23 to delete the dummy profit center of classic Profit Center Accounting in the controlling area.
Hope this helps.
Cheers,
Gimmo -
Companycode 9650 is not setup for materials management
Hi all,
i am loading data from r/3 to CO cube 0copc_c10 from a custom defined datasource.I am getting error as "Companycode 9650 is not setup for materials management". i have checked in rsa/3.there also its throwing same error while displaying (but its showing 2056 records are selected).Dont know what to do.Any help?
Regards,
Murali.Hi Roberto,
here is the message i see :
No cost estimate found for material item 00016 in itemization
Message no. CK 375
Diagnosis
The system could not find a cost estimate for material item 00016 in the itemization of material 1278.357.233 in plant 0800.
It is possible that the cost estimate for this material has been deleted.
Procedure
You can display the costs for this material referenced to cost component view 01.
The costs for material item 00016 correspond to the cost component view in the costing type in Customizing for Product Cost Controlling. If the costing type does not contain a cost component view, the system displays the costs for the cost components that are flagged as being relevant to stock valuation.
And DATA SOURCE WAS BUILT ON FUNCTION MODULE(Custom defined).
regards,
Murali. -
Document Types for Case Management Implementation
Hii,
Can any one provide what document types should be used for Case Management Implementation. If possible please describe what is a queue and how it relates to provider group. What is Scripting and how it relates to solution advisor.
Thanks in Advance.
Best Regards!
Deepak Pi got it..for case management..document types will be CAL CL, E-Mail EM, FAX FX, Mail ML. you can create more as per your business needs...
-
Hi Experts,
Can anyone help me finding specific information (idoc types, bapis) for the ALE configuration for MM? Need to use it for materials, vendors, purchasing organizations, etc...
Thanks in advance!
Kind regards,
NeilHi
Please checvk this link with Idoctypes & message types
http://help.sap.com/saphelp_erp60/helpdata/en/24/903b39878f4205e10000000a114084/content.htm
http://help.sap.com/saphelp_erp60/helpdata/en/78/217eb151ce11d189570000e829fbbd/frameset.htm
Thanks & Regards
Kishore -
Terms and conditions for materials
How do the Terms & Conditions appear in SAP.MM when a materials order gets cut?
Can SAP handle multiple legal Terms & Conditions?
One set of Terms & Conditions for materials orders and another set for service orders??We had implemented a similar requirement at a client.
The solution is as follows:
Have separate document types for Materials and Service POs.
Create separate standard texts (tcode SO10) for the legal terms and conditions for materials and service POs. Use them while printing.
In our case, we had separate legal terms and conditions based on material or services, the company code, etc. We had standard texts for all these and controlled it in SAP script (Version 4.6C).
Hope this helps,
Lakshman -
General Settings for Material Management
Hi,
under Material Management in SPRO under General Settings for Materials Management
1. Set material block for goods movements Lock Exclusively and (ii) Late lock
2. Set Up Material Block for Invoice Verification
Set Up Material Block for Invoice Verification
(ii) Set Up Material Block for Invoice Verification
(iii) Set Up Material Block for Invoice Verification
Pls tell me which option i should select in which case?Hi,
Each option have some time advantage on the other one, when the subject material is blocked for other users, preventing them from carrying out any IM postings.
For goods movement process, Exclusive block will hold the item code for longer time than Late block.
It is better to go with the stadard settings of 'Exclusive block' for Goods movement and 'blocked at first read' for invoice verification.
Jeeva. -
Is there any service desk guide for Solution Manager 7 configuration?
Dear Sir:
I would like to configure the service desk of solution manager 7.
but all i found documents are for solution manager 4.
the IMG setting and other steps are quite different...
wondering is there any new guide or step by step documents for specific solution manager 7?
Regards
Jack Leehi,
There is no direct document which is that much specific
Have you checked this document
https://websmp101.sap-ag.de/~form/sapnet?_SHORTKEY=01100035870000722612&_OBJECT=011000358700000122472008E
U can follow the steps and if u dont find any node u cn search in SPRO
in solman 7 mainly all the activities are under the node SPRO->scenario-specific->service desk
rest check this
Service Desk: Support team determination
/people/dolores.correa/blog/2007/10/06/service-desk-support-team-determination
Service Desk Implementation Guide
/people/bruyneel.guillaume/blog/2008/05/02/service-desk-implementation-guide-part-i
/people/bruyneel.guillaume/blog/2008/06/13/service-desk-implementation-guide-part-ii
Hope it helps,
Regards
Prakhar -
Materials Management Document flow table
hi all,
can any body tell me the Materials Management Document flow table .
thnaksHi,
T001L Storage locations
T024E Purchasing organization
T3001 Warehouse number
TVST Shipping point
TVLA Loading point
TTDS Transportation
ADRC Addresses (Business Address Services)
Material master :
MARA Material master
MAKT Material text
MARC Material per plant / stock
MVKE Material master, sales data
MARD Storage location / stock
MSKA Sales order stock
MSPR Project stock
MARM Units of measure
MEAN International article number
PGMI Planning material
PROP Forecast parameters
MAPR Link MARC <=> PROP
MBEW Material valuation
MVER Material consumption
MLGN Material / Warehouse number
MLGT Material / Storage type
MPRP Forecast profiles
MDTB MRP table
MDKP Header data for MRP document
MLAN Tax data material master
MTQSS Material master view: QM
Vendor
LFA1 Vendor master
LFB1 Vendor per company code
LFB5 Vendor dunning data
LFM1 Purchasing organisation data
LFM2 Purchasing data
LFBK Bank details
Purchasing
EKKO Purchase document
EKPO Purchase document (item level)
EKPV Shipping-Specific Data on Stock Tfr. for Purch. Doc. Item
EKET Delivery schedule
VETVG Delivery Due Index for Stock Transfer
EKES Order Acceptance/Fulfillment Confirmations
EKKN Account assignment in purchasing
EKAN Vendor address purchasing
EKPA Partner functions
EIPO Item export / import data
EINA Purchase info record (main data)
EINE Purchase info record (organisational data)
EORD Source list
EBAN Purchase requisition
EBKN Purchase Requisition Account Assignment
Inventory Management
MKPF Header: Material Document
MSEG Document Segment: Material
EKBE History per Purchasing Document
Invoice Verification
RBKP Document Header: Invoice Receipt
RSEG Document Item: Incoming Invoice
BSIK Accounting: Secondary Index for Vendors
BSIS Accounting: Secondary Index for G/L Accounts
Services
ESSR Service Entry Sheet Header Data
ESLL Lines of Service Package
Regards,
Vengat -
How to create Document Structure for existing project in Solution Manager
Hi gurus
We have all the project document saved using Solution manager . we have ended with Phase1.
We are starting Phase2 and they are asking me to creat different folder as Phase to in existing project and store all the Documents
Can any one please tell me how to create New folder and store the documents in Existing project
Point will given for helpfull Answer
Thanks
BhaskarHi Bhaskar,
Assuming you have full authorisations, the procedure is simple.
Please go SOLAR_PROJECT_ADMIN transaction.
From the menu please select Project -> Copy
In the ensuing screen, key in your desired project name, scroll through the other checkboxes to see if you are happy with the default choices; if not, take corrective actions.
In the last set of radi buttons "Desired behaviour at later version comparison", the default choice (2nd entry there - Adjust target project to the original of the source project) is fine.
From your scenario, since you do not have a Template -> Implementation Project functionality and instead are copying from one Implementation to the other, this radio button is of little consequence.
Execute the process.
In the window that comes up, please choose Local Object, assuming that you do not want to capture the whole contents into a 'Transport'. This is more required if you are aiming to copy the project from one SolMan instance to another.
It would give an information message "Generating in batch job (Name ......)
In a few minutes, you'd receive an intimation of the Project being copied.
That's pretty much about it. Have a check on the newly created project in SOLAR01.
Please let me know if you have any doubts.
Best regards,
Srini -
BR100 document for Order Management
Hi
If any one can share the BR100 document for Order Management module?
Thanks in advance,
RajeshYou can get this document by downloading AIM software.
http://download-east.oracle.com/partners/265498.EXE
The new version is available for download to Oracle Partners only
http://www.oracle.com/partners/develop/implementation/global/aimfoundation.html -
Issue of Materials Management staff entering double PO#, PR# for same Invoice
Hi,
Anyone had encountered the Materials Management Dept staff entering double PO numbers and PR numbers for the same invoice number?? The double PO and PR numbers are all different number but it causes double counting problem..
Anyone encounter it and come up with any settings to the SAP to warn the data entry staff on any existing PO/PR numbers that already exists for the invoices of the same number? Or there is any settings that can be done to stop the data entry from entering two different PO/PR numbers for the same invoice number???
Please kindly help. Thanks!!!
Regards,
RichardHello PKW
You are right about the default PO type for ME21N or ME21.
But there is some hope with EXIT_RV54POCR_006 (Function Module) via enhancement V54U0006. I am not sure if it helps for PO type or for other header data only.
Please go through the following OSS notes and those mentioned within:
506605 - Info: PO generation when transferring shipment costs
746691 - INFO: => LE-TRA-FC-SET => purchase order
Let me know if it helped you.
Maybe you are looking for
-
How to set the language key in Sales document header text?
Hi Guys, When I am creating a sales order I found in the header text tab only three languages English, Thai and Ukranian are mentained.. So can you please tell me how to add/ delete more language keys in language key field in a step by step process??
-
Hello. I just noticed that a software update was available. I think it was iOS7. Did not really take note of what it was. But now my iPad Mini won't come on. it is stuck in a reboot and has been that way for at least an hour. Just tried to attac
-
Data not populating in database
Hi All I am trying to insert data into a custom table but unable to do so... Steps followed 1. Created a custom table 2. Created an EO based on the table 3. Created a VO associated with the EO. 4. Created AM and associated the VO with it. 5. Created
-
Help how do you update soft ware on the iPad
-
Merging cells and using the fill handle to copy the merge in subsequent...
My problem can be best illustrated by me by explaining how I could achieve it in Excel. In Excel, this is how it would be done for example: I select two horizontal cells and click on the merge button to merge them. They are now one cell, with the fil