Document that explains the differnce between CRM 3.0 and CRM 5.0

Hi,
Please, do you have any power point or pdf presentation that explains delta functionalities between CRM 3.0 and CRM 5.0.
If you could send to me I would appreciate a lot.
Best regards,
Xavier de Toca

Hello Xavier,
I would suggest that you check the <a href="http://service.sap.com/     /~form/sapnet?_SCENARIO=01100035870000000202&_SHORTKEY=01100035870000429833&">Release Notes</a>.
Regards
Gregor

Similar Messages

  • What is the differnce between t-mobile network and EE network?

    what is the differnce between t-mobile network and EE network?

    Difference as far as speeds?
    Difference in Prices?
    What do you want to do in the UK with your iPhone?
    Personally, I have enjoyed using 3 UK and Vodafone while I was in Heathrow.

  • What is the difference between ADF Security Auth and J2EE Container Auth

    Hello:
    is there a simple doc that explains the difference between the two. Is it something to do with setup?

    Re: Security, Thanks Frank, a question on your example

  • Difference between R/3 pricing and CRM Pricing?

    Hi Gurus
    What’s the Difference between R/3 pricing and CRM Pricing
    Thanks
    Mahi

    hi
    differences are there in terms of
    Condition Processing
    Condition Technique
    Condition Maintenance
    Differences in Condition Processing
    1. The source condition record cannot be displayed in SAP CRM for technical reasons, when processing conditions in a transaction.
    2. Unlike SAP R/3, SAP CRM recognizes several pricing transactions. This enables you to compare pricing transactions. This can be useful after failed searches or price changes.
    3. The pricing type cannot be predefined when starting a new pricing transaction in SAP CRM.
    Differences in the Condition Technique
    1. Data determination at access level cannot be executed in SAP CRM.
    Differences in Condition Maintenance
    1. It is not possible in SAP CRM to display condition records for predefined selection data in condition lists.
    2. Mass copying of condition records is not possible in SAP CRM.
    3. Change documents are not available in SAP CRM.
    4. Archiving of pricing conditions is not possible in SAP CRM.
    hope it will server ur purpose
    best regards
    ashish

  • The difference between SSO/NSF(GR) and NSR

    Hello
    I have question about the differnce between SSO/NSR(GR) and NSR.
    In my understanding SSO/NSR is stateful switchover from Active to Backup
    Mainly take over teh startup configuration and FIB TCAM table and so on.
    But this protocol need to re-establish the routing table and topology database etc.
    But if NSR functions when stateful switchover happens then it takes over routing table
    and toplogy database etc. right? 
    If so, I think BGP peer down/up (flapping) , OSPF/EIGRP neighbor state change does not happen right?

    ITS is used for accessing R/3 through browser....to implement SSO from Portal to access backend R/3 systems over ITS you need to follow certains step ...
    1. Create RFC Destination in J2EE Engine RFC JCo Provider
    2. Create RFC Destination in the R/3   Transaction: SM59
    3. Maintain Portal Server Settings for the Portal
    4. Maintain Single Sign-On in the R/3 System
    5. Export  R/3 Certificate to the Portal System
    6. Import  R/3 Certificate to the Portal
    7. Create  R/3 System in the Portal
    8. Configure User Management in the Portal
    9. Export Portal Certificate from Portal
    10. Import Portal Certificate to the R/3 System
    11. Set Up Repository Manager for R/3 in the Portal
    12. Maintain User management as SAP Logon Ticket in the Portal
    Hope I have answered your query in proper way.......
    If you want step by step details pl s let me know
    Swapnil

  • What is the Difference between Checking Rule B and RP

    Hi Experts,
    Can anybody Explain the Difference between Checking Rule B and RP
    in Intercompany STO (between Company Codes) which one should i be use?
    in standard settings of IDES system i found B assigned to PO Type NB. but somewhere in forum i saw checking rule RP to be assigned to NB. i totally confused. please help me.
    In below Assignments which one is correct.........
    NB (PO Type) - 1200 (Supplying Plant) - NLCC (Delivery Type) - B (Checking Rule)
    NB (PO Type) - 1200 (Supplying Plant) - NLCC (Delivery Type) - RP (Checking Rule)
    Thanks in Advance,
    charysd
    Edited by: charysd on Aug 2, 2011 12:32 PM

    hi..
    By default checking rule B is assigned to PO doc type...
    In B...only delivery rule is considered..
    while  in RP..delivery time..lead time...transpotation time are added..
    Hope it will help.
    Thnks.

  • Diff. between R/3 CIC and CRM CIC

    Hi,
    What is the diff. between R/3 CIC and CRM CIC?
    Thanks

    Hi Devi,
    In CRM, SAP providing Marketing activities, Services and sales Activities.
    We can call ECC transactions by using Transaction Launcher.
    We use scripts in CRM (Interactive and Remainder)
    For more information visit: http://help.sap.com/saphelp_crm50/helpdata/en/b3/bbc13806684a1eb86b2821ab92827f/frameset.htm
    Reward points if helpful.
    Srini.

  • What's the difference between an audio INPUT and AUX object?

    Can someone explain the difference between an audio INPUT and AUX object? They both seems to do pretty much the same thing ... when would you use 1 over the other?

    revDave:
    Suppose you're recording a guitar track and you want to add a very gentle compressor to avoid overload during the rec process. you need an audio input channel with a compressor inserted. this way, your guitar will be recorded with the compressor processed. If you use audio and midi gear and want to bounce your material, put all your midi audio in an audio input channel.This way, you don't have to use a real audio channel to record them. You can hear them, even use some plugins, and have them bounced with your audio channels.
    Now, suppose you recorded three vocal channels, and want to use an equalizer. You need an aux object to send your vocal channels and use only one eq. This is very useful when you have similar materials recorded in diferent channels (2 guitars, vocals, pete/sax/bone, and so on). Send their outs to an aux object, insert the fx you want, and set the aux object's out to the main out of your project, and it's done.
    I hope it helps you.
    Tovinho

  • Can someone explain the difference between TIER_WEB and TIER_WEBDEV

    Hi All,
    We have two sets of values in Context file as below.
    <TIER_ADWEB oa_var="s_isAdWeb">NO</TIER_ADWEB>
    <TIER_ADFORMS oa_var="s_isAdForms">NO</TIER_ADFORMS>
    <TIER_ADFORMSDEV oa_var="s_isAdFormsDev">NO</TIER_ADFORMSDEV>
    <TIER_ADWEBDEV oa_var="s_isAdWebDev">NO</TIER_ADWEBDEV>
    Could you explain the difference between
    TIER_WEB and TIER_WEBDEV
    and
    TIER_ADFORMS and TIER_ADFORMSDEV

    These values in a shared APPL_TOP system. Pl see ML Doc 745580.1 (Apply Patches in a Shared Application Tier File System Environment) for an explanation.Not necessarily in Shared APPL_TOP, even in traditional multi-node installation you will find these values in the application context file.
    I never came across any document which describes the difference between TIER_WEBDEV and TIER_WEB, I just can say that these variables always have the same value.

  • Our school will soon be requiring ipads.  Is there a video available that is interesting for ages 9-15 that explains the basics of how it works?

    I have been struggling to find an exciting and informative video for students ages 9-14 that explains the basics of how to use an iPad.  Everything that I have found either teaches coding of is very slow moving and more appealing to adults.  If anyone could point me in the right direction, it would be greatly appreciated!

    not a video...
    Joe Rowe's Excellent guides
    Quick help presentation for students:
         https://docs.google.com/presentation/d/18937JdleX2gymtSb8zfbDczV-76BdR2DIfCV9eJi yOE/edit#slide=id.g1b776944_0_224
    for the administrator.
    IT managers who are new to configurator and managing a cart of ios devices:
          https://docs.google.com/document/d/1SMBgyzONxcx6_FswgkW9XYLpA4oCt_2y1uw9ceMZ9F4/ edit?pli=1
             [ original announcement  -- https://discussions.apple.com/thread/4256735?tstart=0 ]

  • Hi, can anyone explain the difference between the models A1457 and ME432B/A of the iPone 5s. Thanks

    Hi, can anyone explain the difference between the models A1457 and ME432B/A of the iPone 5s.

    Hi Gary,
    Model # A1457 designates that it's the European market model, which I believe works on EE, Vodafone and O2 in the UK.
    ME432B/A is the part # that, in your case, I believe, desginates a 16GB Space Grey Unlocked version...
    Someone can correct me if I'm wrong on that
    Kev

  • What is the differnce between Blue,Purple and Orange Audio Tracks. Can you convert either to Green Midi Track?

    What is the differnce between Blue,Purple and Orange Audio Tracks. Can you convert either to Green Midi Track?

    Are you asking about Garageband? Your signature also mentions Logic, but I have never worked with that.
    Concerning Garageband:
    Real Instrument regions from your recordings are purple.
    Real Instrument regions from Apple Loops are blue.
    Regions from imported audio files are orange.
    Software Instrument regions from recordings, loops, and imported MIDI files are green.
    So far as I know you can convert software instrument loops to real instrument loops, but not real instrument loops to software instrument loops.

  • Please give the  diagrams to explain the difference between MVC1 and MVC2

    Please give the functional diagrams to explain the difference between MVC1 and MVC2

    there is no MVC1 or MVC2, only the MVC pattern. The implementation of the MVC is fairly open-ended and there are some variations that are not named as different "versions" because each variation still has the same pattern: there is a model, there are views and there are controllers. What you list as a "feature" of MVC2 in your other post:
    http://forum.java.sun.com/thread.jspa?threadID=719812&tstart=0
    is merely the implementation of a front controller (becoming more popular nowadays) in stead of using multiple controllers. There is no change in pattern, only in implementation.

  • How can I remove the page number from the first page of the document that is the cover page?

    How can I remove the page number from the first page of the document that is the cover page?

    If you open the Pages panel, (Window>Pages) you will see thumbnails of your master pages and your document pages. In new documents, there is usually a master called A-Master and one called None. If you drag the thumbnail of the None master onto the thumbnail of a document page, it will apply that master to that page. Presumably, you have made your page numbers on A-Master, so this will usually do the trick. If you have elements on A-Master that you need on the first page, but just not the page number, you can duplicate A-Master (which, by default will give you B-Master, but you can change the names if you like) and remove the page number on the duplicate and apply that to the document page.
    It might also be worth noting that you can apply master pages in the fly-out of the Pages panel. Go to the fly-out triangle and go down to Apply Master to Pages…, then select a master to apply and the range of pages (1-8 will give you all 8, 1, 3, 5, 7 will be the odds, 1-3, 4, 6-8 if you want continuous ranges and individual pages).

  • Is there a document that details the changes btwn UPK 11.0.0 and 11.1.0.2?

    We are currently running version 11.0.0.
    Is there a summary of the changes between 11.0.0 and 11.1.0.2?
    We are pondering whether to upgrade and are looking for specifics that have changed in the newest version.
    thx.
    [email protected]

    Use the link below to see "What's New in Oracle User Productivity Kit" Version 11.1, ESP1 and ESP2
    http://www.oracle.com/us/products/applications/tutor-upk/whats-new-upk-11-102-v5-1945932.pdf

Maybe you are looking for