Document to document hyperlinks exported to epub do not work

I've been flooding the forums lately with a lot of ebook questions recently . . . hopefully this will be the last one. I've created multiple documents combined into a book, so that when I export my ebook, I'll get the necessary breaks within the book. However, the cross references/hyperlinks that I've created using text anchors throughout the book only work if the source and destination are in the same document. If I have a source in one document referring to a destination in another document, when I export the epub file, the link only jumps at the source rather than linking to the destination. I've creating the links by selecting the open document from the document drop down and then selecting the destination from the text anchor drop down. It seems to work within ID, but not exported as epub. What am I doing wrong? I really need to fix this problem so my TOCs will work, at least.

You are not doing anything wrong. It a bug in CS5.
What happens is, the reference to the source file drops out of the code line, like this:
<a id="anchor-50-anchor" /><span class="superscript"><a href="#anchor-57-anchor">1</a>
and to should look like this
<a id="anchor-50-anchor" /><span class="superscript"><a href="Notes.xhtml#anchor-57-anchor">1</a>
So you will need to insert to relevant .xhtml file back into the code. I use Dreamweaver for the code stuff (only because it's free with CS package and because if give a preview window)
I doesn't take long to fix...

Similar Messages

Hyperlink that contains backslash is not working in Acrobat Reader 8 and 9

Hi,
Does anyone know why a hyperlink that contains backslash is not working in Acrobat reader 8 and 9?
I created a document in Indesign CS and it contains hyperlinks that open up files from network drive so they contain backslash (for example: c:\foder\forder\filename.jpg). All the hyperlinks work in Acrobat Reader 6 but not in Acrobat Reader 8 or 9.
Anybody could share the solution would be very much appreciated. Thanks!

Did you ever figure this out? I am also having problems with the "No Hand" javascript which turns off the (not very helpful) page-forward hand icon (a hand symbol with a down arrow) which confuses our users when in fullscreen mode. We create interactive PDFs and everything worked fine up to Acrobat X/Reader X. Now in XI it doesn't allow the internal link icon (pointing finger) nor weblink icon (pointing finger with W) to appear. It just remains a plain o’ hand icon no matter what you mouse over even though there are links present.

Hyperlink with tracking applied does not work in PDF

We use lots of web addresses in our advertising and generally the web addresses automatically convert to hyperlinks when we distill the files and make PDFs. Recently we've had two instances where someone applied tracking or justification to the line of text containing the url to make it spread across the page. When we make our PDF the url is not clickable. Is there anyway around this? We tried actually creating a hyperlink manually in InDesign by using the Hyperlinks panel and entering the address, but that didn't work either.

Peter,
We'll look into that. We already do two separate PDFs for print and web, but
we are distilling both right now. Wouldn't be too much of a problem to
change to exporting the web version I don't think.
I did a test, just curious, is there a way to keep it from putting a black
box around the link on the PDF?
Thanks for your help! We appreciate it!
Beth
From: Peter Spier <[email protected]>
Reply-To: <[email protected]>
Date: Fri, 14 May 2010 13:24:04 -0600
To: Beth Phillips <[email protected]>
Subject: Hyperlink with tracking applied does not work in PDF
Distilled PDF uses Postscript which does not support hyperlinks and
interactivity. To make your hyperlinks in ID you'll need to export and check
the Include Hyperlinks and Include Interactiviity boxes.
Your printer doesn't need hyperlinks because they don't work on a printed
page. The requirements for print and interactive PDF are quite different, and
you may find you need to make two versions.
>

Search option for multiple lines in iPad for fixed layout ePub is not working. Is there any alternate way to search multiple lines in ePub?

Search option for multiple lines in iPad for fixed layout ePub is not working. Is there any alternate way to search multiple lines in ePub?

Hi SAP Gurus
I need a big favour, I am trying to map serach string with internal order, my search string is MV-38610573 which I have mapped with posting rule 'GENT' which debits bank account and credit revanue accounts but this revanue account requires assignment with internal order, so I have created another 3 search string with same search string 'MV-38610573' and mapped with BSEG-ASUFNR,60000LC ( internal order),3 (bdc account type) respectively, also maintained three entries in search string use which is for BDC FIELD NAME1, BDC FIELD VALUE 1 & BDC ACCOUNT TYPE 1,
But this is not working it gives me following error,
> Error: (KI 235) Account 4421 requires an assignment to a CO object
Your help will be highly appreciated,

JPD Document Upgrader options in Weblogic 10.3.1 not working

Anybody have any idea why this option is not working in weblogic 10.3.1?

I am able to resolve the problem and JPD is upgraded now in my application. But I am facing an issue of deploying WLI application in Weblogic 10.3.1 server. When I try to publish my application from Workshop by right clicking my Controller.java it got publish. But I am getting "403--Forbidden" in default browser of Workshop.
I tried to with exporting EAR of application and deployed in server after deployment I checked the "Testing" tab and I am getting error :
Errors were encountered while scanning the descriptors or deployment plan for this application. These errors are sufficiently serious that they prevent further progress in processing this request. Depending on the exact problem, more details may be available from the log.
Failed attempt to access application context for application: null
I am not getting error anywhere (Console, AdminServer.log, domain.log)
Any help would be appreciated
thanks
Edited by: user13512209 on Feb 4, 2011 12:19 PM

Hyperlinks in PDF preview do not work

Hyperlinks in the preview PDF files that people first see when they click a Send link do not work. Can this possibly be fixed? Some users may not want to go through the hassle of downloading the document and want to be able to use the full document from the preview screen.

You have to create one or more Character Styles to populate that menu.
Format some text the way you want your hyperlinks to look, (color, underline, etc.). With your newly formatted text selected, go to the Character Styles panel (if it's not visible, press Shift+F11), and choose New Character Style from the panel menu. Give it a name like "hyperlink" and click OK.
Now, when you create or edit hyperlinked text, your Character Styles menu will include the character style you created, in addition to [None].

Hyperlinks in PDF, WORD, PPT not working in Safari on iPad

We have an intranet we are serving up for use on the iPad. The links to other documents in PDF, WORD, PPT work on my pc and laptop but not in the iPad. I have looked to see of there is a setting but the only thing I found was to allow pop ups which our site uses but not luck. The links are blue and appear they should work but don't. Any one else have this problem and how did you correct it?

We have a similar problem with links inside PDFs not working, but worse, our links are all relative, ie, only file names. This means that if you DO have an app that makes the links work, but which is not viewing it in the browser, the links will try to open the file, but it won't find it, since it won't have the full domain info.
I realize our users could put the full into on the links, but we chose to do it this way for the ease of preparation--we have hundreds of these files every month and there's no quick, easy or automatic way for the preparers to add the full domain info at creation time--it's 100% manual, even with copy/paste. It all works fine in IE on a PC, which is the overwhelming bulk of our viewers, so until recently when several board members got iPad2s, there was no compelling reason to make any changes. It wasn't broke
elaine
charlottesville, va

Crystal report 10 export to MAPI does not work in Windows 7

hi:
I am using CR10 10.0.5.1025 in Windows 7. I tried to export a report to MAPI and got error:
Error 2147500037 returned by function <MAPIResolveName>
This error occurs both Office 2007 and 2003
Any one see this error before?

SOLUTION
Hi, (excuse my bad english)
The client have and use Windows 7 SP1 x64 Ultimate version .
He use Crystal Report XI R2 Sp6
PROBLEM:   He has a MAPI error Error when exporting PDF to MAPI.
                      He Receiving the following error message when trying to export PDF Crystal Report to MAPI.
                      Error 2147500037 returned by function <MAPIResolveName>
                      Email Client: MS Outlook 2007
SOLUTION:   Were I found on the internet.
Auhtor is: Andrew Whittam
Web Link: http://www.2icsoftware.com/Support/Forum/tabid/110/aff/2/aft/1105/afv/topic/Default.aspx
Microsoft decided to no longer support the 'Simple MAPI' email system in Windows 7. Although countless applications use it to manage emails, including 2ic Pallets, a replacement system has not been provided.
So Windows 7 users have two options:
Manually create email messages by copying and pasting information from the '2icEmail.txt' file that is created whenever there is an emailing error, i.e. every time you try emailing with Windows 7.
Downgrade the ' C:\Windows\System32\Mapi32.dll ' file to an earlier version, i.e. replace Mapi32.dll with the same file from a Windows Vista or XP computer.
Downgrading seems to work ok. Mapi32.dll on Windows 7 has version number 1.0.2536.0, which is the same as Mapi32.dll on Windows Vista and XP. However, downgrade AT YOUR OWN RISK and check with your system administrator before making any changes.
It is strongly recommended to rename the existing Mapi32.dll file rather than delete it so it can be restored if you find other programs do not work after downgrading. To downgrade, follow the steps below:
Open Windows Explorer, navigate to ' C:\Windows\System32   ' (or ' C:\Windows\SysWOW64 ' for 64 bit operating systems), find Mapi32.dll and rename it to Mapi32.dll.OLD or Mapi32.dll.2ic. If you receive the message "You require permission from TrustedInstaller to make changes to this file." or some other permissions-related error, change the Owner of the file and permissions before trying again, i.e. right-click on Mapi32.dll, select Properties, Security tab, click Advanced, Owner tab, click Edit..., select "Administrators", OK the dialog boxes, again right-click on Mapi32.dll, select Properties, Security tab, click Edit, select "Administrators", allow Full Control and OK the dialog boxes. For more detail, good instructions can be found at http://helpdeskgeek.com/windows-7/w...dinstaller.
Run the 'Email patch' from the Downloads - Utilities page of this website. This patch installs and registers the files below.
C:\Windows\System32\Mapi32.dll
C:\Windows\System32\MSmapi32.ocx
Note they are only installed when missing or replacing an older version. For 64 bit operating systems these files are updated in the 'C:\Windows\SysWOW64' folder. Alternatively these files can be manually copied from a different computer and registered using Regsvr32.
The email functionality can be checked using the 'Export/email test spreadsheet', also available on the Downloads - Utilities page. Using this spreadsheet to generate an email on Windows 7 before downgrading should result in an error message. Emailing should work after running the patch.
RESULT:       I fixed the problem customer PC. TEST and Verification are fonctionnal.
Steve
Edited by: sstmartin on Mar 18, 2011 9:11 PM

Export excel option is not working in test environment in Firefox.

In our application 'export excel' option is present in 4 different pages. All the excels working in development environment in both IE and FF. In testing env, all the excels working fine in
IE. But only two excels are working in FF in testing env. Remaining not working and 'The connection was reset The connection to the server was reset while the page was loading' error page appears when we click on 'export excel' button. Can any one help on this issue...

Hello,
You can do one of the following:
Select the table in Firefox and then copy it to the clipboard. In Excel do Paste Special and select either 'Unicode text' or 'text' to copy it into Excel.
Use the Table2Clipboard extension. This will provide the Right-Click menu option, it will copy the data into the clipboard and you can then paste the selection into Excel.
I hope that helps.

CR Viewer tool bar images are missing; Export and Print are not working

Hi There
I used Crystal report 10.5(VS 2008 base crytal report -- CRRedist2008_x86.msi), i developed ASP.net application using VB.net program(i used .net 3.5). One of the pages in the application is having crystal report viewer, which is calling a crystal report to populate the result. The report is working as expected on development machine (Win Vista). Hence, I moved the application onto Server (Windows Server Web; 32Bit OS and IIS). I installed the CRRedist2008_x86.msi, which added the "aspnet_client" under default website. As my site is a made as an application under default webiste. I tried...
a) By copying the aspnet_client folder into the website folder
b) By adding a virtual directory called "aspnet_client" under my website pointing it into the folder under "default website"
None of the trials are working for me.
When I click on Print or Export buttons (although their images are missing), I get the error sigh on bottom left (status bar) of the browser and the popping up the same giving me below error details
Webpage error details
User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 6.1; WOW64; Trident/4.0; SLCC2; .NET CLR 2.0.50727; .NET CLR 3.5.30729; .NET CLR 3.0.30729; Media Center PC 6.0; HPNTDF; InfoPath.3; MS-RTC LM 8; .NET4.0C)
Timestamp: Tue, 2 Nov 2010 15:11:12 UTC
Message: Object doesn't support this action
Line: 41
Char: 1
Code: 0
URI: http://65.123.xxx.x:37188/xyzweb/(S(uhgxkx45iwlrbancwzfunp55))/reportpage.aspx
Any help in resolving this issue would be greatly appreciated.
Thank You,
Edited by: skbo007 on Nov 2, 2010 4:11 PM

Hello All.
I am excited to let you know that the issue is being resolved.
Here is steps that lead me to resolution and solution..
I installed Fiddler2 and looked into every the debugging details of the transaction while running the report.
Learned that the crystal report is using the aspnet_client foler under "Default website" NOT under the crrent website.
Hence I tried to access the image via http path from local machine
http://myserver/aspnet_client/system_web/2_0_50727/CrystalReportWebFormViewer4/images/toolbar/export.gif.
(Notice, "mysite" folder is been removed)
I was expecting to see the gif on my browsers' body. It gave me an error.
Investigated further more on the error and found that the "Managed Pipe Line" of the respective application pool is to be changed to "Classic" instead of "Integrated"
changed it .. Boom...
Tool bar is showing up with proper images and as well the "Export" and "Print" functions are working as expected..
Hope this helps to those in the same situation.
Again.. this is one of many many solutions on this issues.
Thank You
Edited by: skbo007 on Nov 3, 2010 9:42 PM

Service Process Monitor export to excel is not working

Hi,
The Tx. CRM_SRV_REPORT ( Service -> Service Process Monitor) is not working.
When you try to export to Excel (press button Excel (CtrlshiftF7) is not working. However, this button in other transaction is working, for example Activity Monitor.
Any idea?
Lyda

Report to SAP. They sent a solution... it's an error

Hyperlink to file in JSP not working

I have a JSP page where I am providing a hyperlink to a file on the C: drive as follows
Try this
Nothing happens when I click this hyperlink.
When I scroll over the hyperlink I see the correct path "file:///C:/ReqImport/data.txt" in the status bar and when paste this path in my address bar, it does open up the file.
Any ideas why this file hyperlink does not work on this JSP page.
Thanks

Hmm, you're right, I just tried it and it doesn't appear to work. It looks like a security thing: If the original page is on my hard drive, links to other files on my hard drive work. But when the original page is on a web server, links to files on my hard drive don't appear to work.
Do you realize that such a link is referring to a file on the C: drive of the client, the user, not the C: drive of the server? I'm not sure what you're up to, but for most applications such a link is pretty much useless, as you normally have no way of knowing what files the user has on his C: drive.

Export in backup assistant not working

My Verizon Export function for contacts in backup assistant is not functioning. It prompts to pick backup export action, e.g.to computer, gmail, etc. and it is supposed to give compatible format, e.g., CSV. Ony the pick format yourself work, but there is no continue button, only a close button for the dialog window. It does not work for anything.

[oracle@localhost ~]$ expdb scott/tiger@oracl full=y directory=test dumpfile=fulldump.dmp logfile=full.log
bash: expdb: command not found
[oracle@localhost ~]$
Command should be expdp not expdb
Regards
Asif Kabir

CS5 export to transparent png - not working

I have tried every think I know to get a png optimized transparently though fireworks cs5. I have read prior forum post, and watched several tutorials indicating ways to do this and when i try they do not work.
I created the image in photoshop and exported it to a png file. Then i opened it in fireworks in an attempt to make the png much smaller. The image will be overlaying a patterned background on the web so needs to be totallly transparent. I've tried every combination of export option and still, when I put the image in my site there is a white background.
Ive tried png-8 with alpha transparency and changed the matte to nothing. The main window in fireworks never gets rid of the white background and when i export it's still white on my site.
I've tried png-32 with both alpha and index.
When i use the png exported from photoshop on my site it looks exactly how I want it, but the file size it too large so that's why Im putting it in fireworks but when i export it from there it's not transparent.
help!! - Kim

Sorry, i was not certain about your level...
You may be interested in knowing that another tool optimizes png files beyond what Fireworks can do - and I would avoid Photoshop's abysmal png export for production. As you are probably aware of, Photoshop's web export does not allow us to save an indexed png file with full transparency - something FW was always good at.
Try Color Quantizer: http://x128.ho.ua/color-quantizer.html
It allows for png files with full transparency to be saved with limited colour palettes exceeding 256 colours! With CQ you can optimize png files to the fullest, while still retaining an excellent visual quality, since you can optimize easily to a limited palette of, for example, 512 or 1024 (or a custom number of colours). Extremely useful.
It also optimizes the transparent areas, and will automatically remove any bitmap data from those areas (which are not visible).
And, even better, a simple quality mask brush tool assures you have maximum control over the inclusion of even tiny splotches of colour you wish to retain.
I have long left FW behind for my png optimization, because of CQ. It's brilliant, and still somewhat of a hidden gem. Try it out, you might be pleasantly surprised. And it's a free download.

Oracle Applications 11i Export to Excel does not work.

The export button does not work. When I click on export it says complete but does not bring up a window asking me to save. I have pop up blocker off and the site added to trusted sites. I have tried everything I have found so far but no luck. Help would be much appreciated.....thanks!!!!

Please post the details of the application release, database version and OS.
The export button does not work. When I click on export it says complete but does not bring up a window asking me to save. I have pop up blocker off and the site added to trusted sites. I have tried everything I have found so far but no luck. Help would be much appreciated.....thanks!!!!Was this working before? If yes, any changes been done recently?
Can you reproduce the issue from other browsers/machines?
Can you find any errors in the database log file?
Please see these docs/links.
Troubleshooting Export and Attachment issues in Oracle Applications 11i [ID 338651.1]
Attachments and Exports, a Troubleshooting Guide [ID 135444.1]
Export To Excel: How To Activate Debugging? [ID 464469.1]
How to Troubleshoot Forms Hanging Using Export Functionality [ID 423261.1]
https://forums.oracle.com/forums/search.jspa?threadID=&q=Troubleshoot+AND+Export&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
https://forums.oracle.com/forums/search.jspa?threadID=&q=Troubleshooting+AND+Export&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
https://forums.oracle.com/forums/search.jspa?threadID=&q=Export+AND+Excel&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
Thanks,
Hussein

Document to document hyperlinks exported to epub do not work

Similar Messages

Maybe you are looking for