Document to go on Desktop couldn't find IPad!
I can use the software Document to go to synchronize my document between my desktop and iPad before. But the desktop can not find device yesterday . I follow all instruction from document to go to fix the problem. And reinstalled the software and reset the wi-fi etc. but I didn't solve the problem. The other software Xunlei ( video software) also can't find the device. Therefore I thought the problem should occurred in iPad. Who can give me a hand?
I wonder if the firewall on your computer/router/network could be blocking it? no sure fire way to tell you how to look into it since every program and person's setup can be different, but that could be one thing preventing syncing over wifi, the communication being blocked by a third party.
Might be something for you to play with.
Similar Messages
-
When I create a New Folder (on the desktop or in Finder), the system uses the Generic Document Icon instead of the Generic Folder Icon. How can I change this back?
All of a sudden I noticed that most of the folders on my computer were no longer using the folder icon, but the generic document icon. I had to manually change back the icon being used by opening Get Info for each folder and copying and pasting the generic folder icon from some folders that remained unchanged. Now whenever I create a New Folder (right click -> "New Folder"), the icon that shows up is the generic document icon (white page with top right corner turned down). And I have to manually change it so it shows up as a folder in Finder or on my desktop. I don't know why or how this switch happened. All of the folders now on my computer look ok, but I need to change the default so when I create a New Folder it uses the correct icon.
I have also Forced Relaunch of my Finder and rebooted the system. I downloaded Candybar but am not sure what will fix anything, so I haven't proceeded.
Anyone know how I can do this? Thanks.Anyone?
-
couldn't find the adequate forum. I run win 8.1 and the adobe acrobat dc app on my computer doesn't access the doc cloud. I can´t turn the mobile link on. I can access the cloud from my browser, but not from the desktop app. I can access from my mobile app.
Can you please post a screenshot of your Acrobat DC when launched, without opening a PDF?
Thanks,
-Amboo -
What does mean that a question mark continually shows up in place of the Document Folder on the desktop?
Welcome to Apple Support Communities
It means that this folder couldn't be found. Drag it off the Dock, and then, open a Finder window, go to the folder that contains it and drag it to the Dock, so it will show up -
So recently I synced my iPod Classic 160 GB like I did so many times and when I wanted to play some music afterwards it couldn’t find any files on the iPod anymore. However when you look in the settings it displays that ~roughly 90 GB free space is available. Seen the fact that I had about 60 gigs of music this doesn’t seem like a coincidence and I think my music is still somewhere on the ipod but the HDD isn’t recognizing it anymore.
I’ve tried resetting it, and resetting it to factory settings, which didn’t work. When connected to a desktop it won’t be recognized by iTunes, it displays an error message that the iPod cannot be read and that I have to reset it to factory settings.
I’ve spent some time researching this problem yesterday and I ran into a myriad of vaguely similar problems didn’t really offer any help. Currently I’m thinking that formatting the iPod might work, and restoring the software afterwards. However this is a rather bold strategy so I’d like to consult you here first.
Thanks in advance!Hi turingtest2,
Thank you for the info, with formatting my iPod I managed to connect it to iTunes again.
However..in the page you linked to there is a section about how transferring large amounts of data can dump your library. That seems to be the problem in this case. It won't even allow me to transfer more than 2 gigabytes of music per sync, if I go higher it will dump everything again. Having over >60 GB of music in my library, this is disastrous to say the least.
Do you think that there is any other solution besides the method you mentioned involving Smart Playlists? -
Itunes update failed on 2 computers, couldn't find msvcr80.dll files.Now have no itunes at all
iTunes update failed on both computers. Couldn't find msvcr80.dll, now I have no iTunes at all. Is it iTunes or the computers?
Beth Trachtenberg wrote:
I did NOT move the other folders (Album Artwork, Mobile Applications, Playlists, Previous iTunes Libraries) or files (iTunes Library, iTunes Library Extras, iTunes Library Genius, iTunes Music Library) that are located inside the Music/iTunes folders.
should be no problem. i'm doing this also.
Everything was working fine on both computers - Consolidated the library on the external drive and did the Change the location of the iTunes Media folder in Preferences on both computers, no problem.
However I added two movies and a few songs to my desktop Mac yesterday - all showed up and played fine after adding them - but when I plug the external drive into my laptop, the new additions don't appear in the library.
if you're purchasing content from the iTMS, you could use _*Home Sharing*_ to automatically add new content to all machines on your local network.
Am I right in guessing that it is because the iTunes Library file on the laptop isn't the same as the one on the desktop computer?
yes.
Is there a way to add them to the library listing on the laptop? If yes, is that something I need to do every time I connect the external drive to the laptop if I've added things from the desktop computer (I never add stuff on the laptop).
basically, yes. however, there's _*Home Sharing*_ and ... see below.
Should I have put the entire iTunes folder - files, folder and media - onto the external drive?
that's one possibility, however, only one Mac @ a time could access that library. there are other options:
*the easy way*
check out TuneRanger.
*the more involved way*
click here for tips/information.
JGG -
When I try to open any docx file from the SharePoint it opens on web via office web apps, and when I choose edit document > edit in Word , Microsoft word show me this error "Sorry, we couldn't find your file.
Is it possible it was moved, renamed or deleted?" followed by half a url to the end users document on onedrive.
I noted that this problem only happens with Docx files, with specific users and only when you try to open the Docx file from OneDrive folder ( SkyDrive ) which is hosted in the MySite.
Any Help?Hi,
According to your post, my understanding is that you failed to open the Docx file from OneDrive folder ( SkyDrive ).
Since this problem only happens with Docx files, with specific users, I recommend to delete and recreate the personal site for the specific users.
More information:
Configure My Sites in SharePoint Server 2013
Best Regards,
Linda Li
Linda Li
TechNet Community Support -
My computer couldn't find my playbook anymore after software update!!!
After software updated to 1.0.7.3312, my computer couldn't find my playbook anymore.
First couple time it could find normally as like before, few times later it could not anymore!!! LOL.
I tried connect to the other PC either in my office and home several times, exactly same happen again.
Anybody got same problem that I have? Please advice me.
My computers have Window7, 32bit.Please review the knowledge base articles here:
Article ID: KB27424 Identifying and troubleshooting issues with the BlackBerry Desktop Software detecting a USB connected BlackBerry PlayBook
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code -
I couldn't find a word to read except those
Hello, I just paid more than $26 to convert PDF file to Word but it does not work the way I expect. The file is in Farsi language but when it converted I couldn't find a word to read except those are in the left side and under the Headings, Notification. Is there any way you could help me with this? Thanks 1- 64774008070
Hi ensafali hedayat,
How well a file converts depends largely on the quality of the original file.
Is it possible for you to share the document with us, if it is not confidential?
I will check it from my end.Please add the link to this forum post for reference.
I have sent you my contact details on your email id.
Regards,
Florence -
Couldn't find the amount in Goods Rcpt Analysis REM(mcp8)
Hello there, i got a extremely emergency question here,
i used mfbf to do assembly backflush and after that,1000buc
water's metieral document was generated.everthing is done perfectly till this time.
but when i used mcp8 to check out the figure after doing mfbf,
i couldn't find the amount i have done.dunno what's the problem there.
can you help me??Hi,
MCP8 transaction code gives following information;
(1) GR Qty
(2) Actual Scrap
(3) Order Qty
(4) Scrap Qty
To get a value, you have to write a Query using SQVI or through ABAP
PS: Post this query in PP Forum to get a quick reply.
Bye,
Muralidhara -
Hi!
I have a simple app, a valid edd, a valid dtd, a correct template and so on. All works correctly but I have this error after the insertion of a Table. Wherever I move the mouse FM says: "Couldn't find tag:TCell" or "TGroup" or "TRow". The structure of the Table is the same of the Book Template in FM.
What now?
Thank you.Luca,
Does the book validate (Element > Validate)?
Were these documents converted from unstructured document? Sometimes the conversion process leaves some chaff behind.
I have encountered tables, created or converted from unstructured by others, that have rows without cells. The Row elements show in the structure, but not in the document and I cannot delete them. But I have never got the message you are talking about. In my case, the only way around the problem is to create a new structured table and copy the good rows from the bad table to the new table, one row at a time, to keep from getting those bad rows.
Van -
i have bought a film from itunes and the credit has come out of my account, but i can't find the film anywhere, it said it was downloading, then i left the laptop and on return i couldn't find the film. how do i find the film?
Maybe it is in the Purchased category of iTunes,
Try going there -
Couldn't find root user. Sleeping and trying again.
Last week I installed an MSO 2004 update on my G5 iMac running 10.4.11.
Then I attempted to repair permissions. The repair permissions process
halted at about half of the progress bar. I let it cook for about two
hours without success, then tried to force quit Disk Utility. I
couldn't force quit it, so I very reluctantly turned off the Mac;
something I've rarely ever done. I waited five minutes and then turned
the Mac back on. The startup sequence progressed to the point where the
system displays the gray apple on the gray background, and the circular
progress indicator or gear begins turning. I let it turn for one hour
and then powered off the iMac, then powered it back up with the same
results.
I powered it off again and then commenced a Safe Boot. Same results as
before.
I powered it off again and then started it in Single User Mode. No
problem. I ran /sbin/fsck -fy. No problem.
I typed "reboot" and it rebooted. This time I start it in Verbose mode.
After the preliminary startup code, the system began repeating the same
message lines:
dsFindDirNodes returned -14071, count = 0 count = 2147483646
Couldn't find root user. Sleeping and trying again.
A Google search produced very few results. I don't have a backup
because I inherited this iMac from my 75 year old semi retired father
who wanted a 20-inch Intel iMac instead. I just goof around with the G5
iMac from time to time, and am considering giving it to my little niece and
nephews. It worked great for about a month. I have customized my
user account and the accounts for the little ones, so I really don't
want to wipe the hard drive and reinstall Tiger again from scratch.
I booted from the suspect internal hard drive into single user mode.
I ran /sbin/fsck -fy on the internal hard drive.
All tests passed.
I ran fsck_hfs on the internal hard drive.
It returned a message that stated that I needed
to add additional information.
I ran fsck_hfs with several switches enabled, but
it continued to return this message.
I performed the procedures in Apple's article 107210
"Mac OS X, Mac OS X Server: How to Replace the NetInfo
Database (Restoring from defaults).
This did not solve the problem.
I booted this computer from my external Firewire hard drive that I use
to create nightly backups on my G4 iMac using SuperDuper!.
I ran Disk Utility Repair Disk Permissions on the
internal hard drive.
There were no permissions errors.
I ran Disk Utility Repair Disk.
All tests passed.
I ran the TechTool Pro Suites --> Advanced Tests on
the internal hard drive.
All tests passed except for "Startup File" which it
listed as " <Not Present>".
The description of this test is:
"This test checks the Startup file. The parameters
within this file contain the information used by
the computer ROM to determine what program will
boot the computer as well as other system-specific
aspects."
I ran the TechTool Pro Performance --> Maintenance
routine on the internal hard drive.
It completed the maintenance successfully.
I ran DiskWarrior on the internal hard drive.
It reported no directory errors, but I replaced it
anyway.
While booted from the external Firewire hard drive, I viewed what
appears to be the proper compliment of folders on the internal hard
drive. Of course, I didn't examine and verify every subfolder in the
hierarchy, however, examining the Applications, Library, System, and
Users folders two deep seemed to indicate that everything was there.
I booted this computer from my Tiger installation disk. I selected
Utilities --> Reset Password... (I think.). It listed only the
Administrator account (root) on the internal hard drive. It did not
list the other three accounts that I created on this hard drive, even
all three respective folders are present in the Users folder. However,
it did list all four accounts on the still attached external Firewire
hard drive.
By every measure, this drive and its directory are sound. I am
concerned that TechTool Pro reported that the Startup File is Not
Present. Beyond the meaning that the words suggest, I'm not sure what
this really means. I checked the Micromat site and found the following:
The Startup File has been defined but not yet
implemented by Apple.
What does the message signify:
dsFindDirNodes returned -14071, count = 0 count = 2147483646
Couldn't find root user. Sleeping and trying again.
Can I effect a simple repair?
Thank you.I think besides a reinstall, only DiskWarrior from Alsoft...
http://www.alsoft.com/DiskWarrior/
stands a chance of fixing it. -
Error: Couldn't find delivery channel for message
Hi All,
In our production environment, we sometime get the following error (Channel Audit Log):
2009-01-12 15:08:47 Error Unable to find channel ID
2009-01-12 15:08:47 Error Delivery of the message to the application using connection SOAP_http://sap.com/xi/XI/System failed, due to: com.sap.aii.af.ra.ms.api.RecoverableException: Couldn't find delivery channel for message: 496b9e98-9466-0109-e100-8000ac10a218.
2009-01-12 15:08:47 Error The message status set to NDLV.
This particular interface runs around 100 times a day without any issues, however around once or twice a month we get this error.
This is a synchronous interface.
Could be because of number of threads alloted for Synchronous messages in Visual Admin.
Thanks.Hi XIer
try doing a CPACache Refresh:
Http://<host>:50000/CPACache/refresh?mode=full)
Best regards,
Chris -
Missing Pictures.
Have made a rebbot from Time Machine, and now I lack a lot of pictures. Can see icons, but not enlarge them. Especially pictures where 2009 is included in the date is missing?
When I set up my desktop, I can find some of the pictures. Where do They hide, and what shall I do.
Have made back up, but unfortunately a little too late. What to do?
MacBook Pro 15 "late 2008, Processor 2.53 Ghz Intel Core 2 Duo, Graphics NVIDIA GeForce 9400M 256 MB, Software Mac OS X 10.7.4 Lion (11E53).1. You did not get an error message telling you that your iPhoto library was getting full. You got a message telling you that your HD was getting full, right?
OS X needs about 10 gigs of hard drive space for normal OS operations - things like virtual memory, temporary files and so on.
Without this space your Mac will slow down as the OS hunts for space on the disk, files will be fragmented, also slowing things down, apps will crash and the risk of data corruption - that is damage to your files, photos, music - increases exponentially.
Your first priority is to make more space on that HD. Nothing else can be done until you do.
Purchase an external HD and move your Photos and Music to it. Both iPhoto and iTunes can run perfectly well with the Library on an external disk.
Your Library has been damaged from being run on an overfull disk.
How much free space on it now?
Maybe you are looking for
-
I am unable to execute swf file present in server on local machine.
Hi all, I am a newbie to Flash and ActionScript 3.0 platform. I don't know whether this is the correct place to post this kind of queries/problems/issues here. Till now, I had posted only basic flash issues here in this forum. I feel this is the
-
Dear gurus, Can we make part payment through APP? Please tell me the procedure. Thanks in advance N.M.B
-
my iBook is out of order, the technician says: the logic does not function. he says you have to buy a new logic or to throw the computer. what I can do?
-
Rman restore files from diff location
Hi, In rman backups i have kept 3 location of backup /disk1,/disk2,sbt.now i want to restore the datafile or archive file from only location /disk2 .how can i do that.I dont want to give the backupset name or tag etc etc.Can i point allocate channel
-
How can i choice not to install XMLDB in the oracle 10g 's installation ?
thank you !