Document Type and Plant

Hi,
How to assign Document type to Plant. When I checked with our SD consultant he told Document type is independently configured and it's assigned to sales organization and not plant. Just want to check whether any report/view available to see the list of Sales document type assigned to a particular plant/sales organization.
Thanks in advance.
Regards,
Balaji Viswanath.

Hi balaji
we cant assign sales document type to plant. we assign sales document type to sales orgn. just bcoz of simple reason that we create sales order with the data of sales area , sales office ,sales grp and not plant. bcoz we assign plant to material master data ,as we need sales area for the sales doc type , for material also we need plant. bcoz material is stored at plant and storage location level.for that purpose only we create a material with plant,storage location , sales orgn, dist channel.
Reward if useful
Regards
Srinath

Similar Messages

Restrict purchase order document type at plant level

Dear,
I would like to restrict the purchase order document type at plant level,
Plz help me.

Hi Dear,
             at the Plant level you have to use the below given Authorization Objects for the Users in different Plant
M_BEST_BSA     Document Type in Purchase Order
M_BEST_WRK     Plant in Purchase Order
Give the values of the respective Plant and Order Type for the Respective Users.
For more help you can contact your Security Team.
but before that please check out in the T-Code SU24, if both the Objects are active, if not then ask the ABAP person to activate them.
Hope it helps you.
regards,
yawar Khan

Reading the description of Sales document type and Profit centre from table

Hi
I want to print the description of Sales document type and Profit center on output
I have checked in table TVAK and CEPC but i am unable to pick description against the code
Can anyone please suggest from where can i capture the description of sales document type and profit centre
Thanks and Regards
Sunil Srinivasan

Hi
If you have the sales document number VBELN then pass this VBELN in to table VBAK and you can get the sales document type VBAK-AUART.
Now pass the same VBELN to VBAP table here you can get the Profit Center VBAP-PRCTR
For sales Document type description you pass the VBAK-AUART values into table TVAKT table and get the values for TVAKT-BEZEI is you sales document type description
For Profit center description goto table CEPCT and enter the profit center you will get the
KTEXT
LTEXT
MCTXT
regards
Prashanth
Edited by: Prashanth@SD on Oct 25, 2010 12:29 PM

New Document Types and new Number Ranges

Hi,
Plz tell me How to configure New Document Types and new Number Ranges for Services and Asset Purchases.
How can i maintain Services with or without Master data.
Plz tell how much services are there and how to configure step by step

Hi
New document type can be configured in SPRO - SAP IMG- Material management - Purchasing - Purchase order - Define number rabges / define document types.
With out service master straightaway you can create the Service PO with account assigment.
AC03 - Create service master record.
ML10 - Model service specifications
Then Service conditions ML33 or ML39 or ML45
Create the PO and then do the service entry in ML81N
Regards,
Raman

BBP_BS_GROUP_BE for new document type and number range

Hi gurus,
I am working on Classic scenario in SRM and currently have used the above BADI to use a different document type and number range when creating the PO in the backend system. It all works fine. The only thing is I noticed that the BE_DOC_TYPE field in the shopping cart is still reflected as 'EC' even though the PO created in ECC is for example EC1. My question: Is this standard SRM? If so, is it common to leave this field as it is or is it advisable for us to change the document type to EC1 as well? Also, is there any implication in standard SRM reporting and downstream processes that you are aware of?
Appreciate any advice on the above.
Cheers!
Sf

We have ended up having to populate the document type on a custom field or alternatively replace the existing one.

Document Types and No range

Hi Gurus, i am new to SAP,
please guide me in
Configuring document types and number ranges for PR, RFQ, PO, Quantity Contract, Value Contract and Scheduling Agreements with release.
Thank is Advance
Kapil

You have to maintain No Ranges for PR at Materials Management->Purchasing->
Purchase Requisition->Define Number Ranges
Define number range interval
Choose type of number assignment (internal or external)
You maintain the associated number ranges in the step Define Number Ranges under "Purchasing".
SAP recommends that you accept the settings defined in the standard system. In this case, no action is required on your part.
<b>Document type</b>
Purchase Requisition->Define Document Types
Steps
1)Create new document types
2)Define the item interval
3)Allowed Item category.
4)Define allowed follow-on document types
5)Assign document types to a number range group
Similarly for all the processes you can maintain Number ranges and Document Types at IMG menu path at Purchasing.
Reward if helpful
Regards
Sanjay l

Document type and item category

Hi All,
I have created two document types in MM for creating Purchasing Requisition. One for material and for service and material. But when i am selecting service and material document type, the item category at item level is automatically converted to D(Service) even though i dont select any thing(material). I have not done any settings for iterm category based on document type. Pls let me know why i am facing this problem.
Thanks,
Raju

Hi Amit,
For both the document types (Material and service, service) the item category standard and service are assinged. I have checked in SPRO--->MM-->Purchasing->Purchase requisition-->Define document type--->Check Allowed item category assingment and Link purchase requisition document type.
Hi Raghavendra
If SAP standard service document type then we cant take material and can take service only for creating PR, but in my case i have created one document type and named it as service and for this document type i have assigned item category of service and standard. In this case it should allow me to create PR with standard item category, but its not allowing me to do so. Pls let me know how can i solve this issue.
Thanks,
Raju

Document type and invoices coming from SD

Hello,
Does anyone know where is the customizing point where I make the link between the document type and the invoices coming from SD (standard type RV)?
Best regards

Hi
If you have the sales document number VBELN then pass this VBELN in to table VBAK and you can get the sales document type VBAK-AUART.
Now pass the same VBELN to VBAP table here you can get the Profit Center VBAP-PRCTR
For sales Document type description you pass the VBAK-AUART values into table TVAKT table and get the values for TVAKT-BEZEI is you sales document type description
For Profit center description goto table CEPCT and enter the profit center you will get the
KTEXT
LTEXT
MCTXT
regards
Prashanth
Edited by: Prashanth@SD on Oct 25, 2010 12:29 PM

Document type and No. range for non leading ledger

Hi Friends,
can anybody tell me about the document type and No. range I can take for the non leading ledger.
Regards

Ok Pankaj,
I am taking document types by copying it from the SAP standard document type and the No. range identical to the No. range assigned in the standard Doc. type. Is it ok
LA                9A
LB                 9B
LC                 9C
LD                 9D
LE                  9E
LF                  9F
LG                  9G
LH                  9H
LI                   9I
LJ                  9J
LK                 9K
LM                 9L
LN                 9M
LN                 9N
LO                 9O
LP                  9P
LQ                 9Q
LR                  9R
LR                  9S
LS                  9T
LT                  9U
LU                 9V
LV                9W

Field editable in FB02 for only one document type and user

Hi:
I have a question about editing a field and I hope you can help me. I need to make a field editable in FB02, but only for one document type and two users. The field is BSEG-ZFBDT, Baseline payment dte.
I have tried in ‘Document Change Rules’, make this field editable when line item not cleared, but it works for all document types and users.
Please, any idea?
Thanks in advance for your time.
Best regards.

Hi,
You have to write a ABAP code to achieve this.
Validation is another Option where you can mention that value is allowed in the Baseline Date field only if the User and Document type value satisfies.
BR
Amitash

SAP supplied document types and applications

HI gents,
As SAP is installed, there is quite a few document types and applications "installed" by default.
Can i delete them, or are they used by/expected by other parts of the system?
Any comments appreciated.
Espen

Hi guys,.
Thanks for your feedback. I'm fully aware of the techical side of this, and i know i can delete and change. Even though four types, D01, EBR, Q01 and Q02 are marked read only.
I was more looking for the reason they are there, as in why did SAP include them and is there any documentation behind it.
Espen

Oracle B2B not picking up Document type and document version from JMS msg

Hi,
We have developed guideline and schema for a custom positional flat file using Oracle B2B Document Editor. We were able to creat and deploy the agreement. But when we drop a message on a Queue being listened by Oracle B2B. The document type and version values were empty. We got the following error,
Error Code B2B-50083
Error Description Machine Info: (xxxxx) Description: Document protocol identification error.
Error Level ERROR_LEVEL_COLLABORATION
Error Severity ERROR
Error Text Document protocol identification error.
This is our Java code for testing that drops the message, and I can see the JMS header with these values.
message.setText(messageText);
message.setStringProperty("FROM_PARTY", "CT-Sender");
//message.setStringProperty("FROM_PARTY", "RemoteTP");
message.setStringProperty("TO_PARTY", "MyCompany");
message.setStringProperty("DOCTYPE_NAMEe", "CT");
message.setStringProperty("DOCTYPE_REVISION", "CT-AES");
We were able to test a 850 document successful through different document and agreement ....
Thanks
John

We have uploaded the ecs and xsd files. Are they the parser files you are mentioning? The following is the information we have for the transaction. I am just surprised whty the Document Type and others are empty.
Thanks
John
Id 0A9F196E132459F393C00000184B4897
Message Id 0A9F196E132459F392300000184B4893
Refer To Message Refer To Message
Sender Type Name
Sender Value CT-Sender
Receiver Type Name
Receiver Value MyCompany
Sender CT-Sender
Receiver MyCompany
Agreement Id
Agreement
Document Type
Document Protocol
Document Version
Message Type REQ
Direction INBOUND
State MSG_ERROR
Acknowledgement Mode NONE
Response Mode ASYNC
Send Time Stamp 09/07/2011 04:40 PM
Receive Time Stamp 09/07/2011 04:40 PM
Document Retry Interval(Channel) 0
Document Remaining Retry(Channel) 0
Document Retry Interval(Agreement)

Limit Document types by plant and user

Hi,
I need to limit document types between two plants meaning a user should be able to use only one document type when buying from another plant but have all other types available for use generally.
Example when user A from plant 1000 buys from plant 2000 he can only use UB Purchase Order type but for all other plants he can use any document types.
Points will be awrded.

You can limit the document type for each buyer in the Authorisation profile for the buyer. This is done by SAP Authorisation team. T code: PFCG
Please contact your SAP Authorisation Team or SAP BASIS Team.
G.Ganesh Kumar.

Assign document type to plant?

Hi!
Document types are assign to sales areas but i need to assign one specific document type to only a few plants of this sales area. ¿How could i do this?
Regards.
Eduardo

Hi guys,
Thanks for your answers. Pramod what i want is to assign a document type to just a few plants that belong to the same sales org. (in this sales org. there is other plants to which i don't want to assign my document type). The idea is that when i create a sales order with this Order type only a few plants are available.
Roberto i beleive that the listing/exclusion funtions is just for materials.
Sudarshan i already talked to my abap'er and if there is no other option through customizing will do that.
Thanks again.

Document Type ZI + Plant number

Hi,
Please suggest where i can check linkage between document type NB/ZI & plant number; as for one specific plant & for a particular material type, I am getting purchasing Document type NB; but I want to change it to ZI.
Thanks & Regards,
Rohit Guliani

Hi,
Do you mean that you have set the default document type to ZI and yet it sometimes defaults to NB but only for one plant and material type combination?
Or do you WANT it to do this so that if the user enters one Plant and a certain Material type you WANT it to default to NB.
The document type defaulted cannot be different for a certain plant / material type. To control this by plant would need a user exit or modification but what happens if there is more than one plant on the PO (or more likely more than one plant / material type combination) what would you expect the system to do?
Steve B

Document Type and Plant

Similar Messages

Maybe you are looking for