Document Type is not internet Enabled in DMS BSP?

Hi all,
When i test the cvaw_document_change bsp...i hv given a document number and doc type and version...when i click on change....it says "Document Type is not internet Enabled"
What exact settings needs to made?
Pl suggest me.
Rgds
Pradeep

For this, you need to "Setup Web Documents".  Define the doc type , here is how to do this.
Transaction SPRO
-> Cross Appliction Components
-> Document Management
-> Setup Web Documents (BSP)

Similar Messages

  • The document type does not match any of the given schemas

    Hi,
    I have created an envelope schema.To precisely process inbound envelope documents,in the xml disassembler component i have used the Documentspec and envelopespec properties.
    in the properties i have the the schema name,Assemblyname
    but i have got the error like The document type does not match any of the given schemas.
    I have verified the schemas have deployed properly.
    can you help me on this?

    Hi Sujith,
    As pointed out by Johns lot's of thing can cause this. You have to analyze lot of things, but this kind of error indicates that the message type that you are debatching is not deployed. For Example :
    If you are debatching on Order than Order schema should be deployed in the admin console.
    One more point that you need not to specifiy Documentspec and envelopespec properties until and unless there are multiple schema's of same message type deployed in different assembly. The dissasembler component will automaticaly disassemble the messages
    just looking after the body XPATH.
    Regards,
    Rahul Madaan

  • In ME51N screen service requisition document type is not comming

    Hi gurus,
    Can anybody help me out ,In production server in me51n ie purchase requisition screen, where we used to select the different purchase requisition order types ,service order is not comming whereas in development server it is comming.In spro i have seen the settings ,in document type service order  item category is attached.
    Please help me its urgent.
    Thanks N Regards,
    Siddhartha Chatterjee

    if that document type is not even coming in the spro settings for the production server then i belive it has not been trasported to the production server and that means there has been some intentions to do that so its beeter to make sure that do u really need that document type or not if u need it then try to transport it from qc

  • F104 (ERROR: Document type SA not defined)

    Hello,
    Error posting Provisions for doubtful receivales via F104.
    The document type SA not defined!
    I need to create document type SA, or i can use a existing one?
    If i need to create SA, can i create it from a document tyoe model?
    Best regards,
    Bruno Valente.

    you can select SA document for the transaction. or you can create new docment in tcode fbn1

  • Period is closed for posting or correct document type is not being used

    Hi All,
    I am trying to post transaction in AB01. But i am getting below error.
    I have checked OB52 and the periods for "+" & "A" are open for 2012.
    Error:
    Period is closed for posting or correct document type is not being used.
    Please assist

    document type i am using is AA.check it other side entery documenttype period open or not

  • Legal Control : Document Type Mapping not Maintained

    Getting an error SAP GTS :Legal Control : Document Type Mapping not Maintained ,while creating order in feeder system .
    I checked the configuration maintained SAP Global Trade ServicesSAP Compliance ManagementGeneral SettingsDocument StructureAssignment of Document Types from Feeder Systems-Assign Document Type at Feeder System Group Level
    Similarly I checked for item category.
    Please let me know what further configuration have to be maintained for correcting the error.
    Thanks & Regards

    Hi,
    The document type mapping is required in R/3 system too. You have to maiatain order type say OR/TA in R/3  below path
    IMG--> Sales and Distribution --> Foreign Trade/Customs --> SAP Global Trade Services - Plug-In --> Control Data for Transfer to SAP Global Trade Services --> Configure Control Settings for Document Transfer --> SDOA.
    Note: If you maintain OR in R/3, you will have to maintain same in GTS. if you maintain TA in R/3, same maintain in GTS.
    Regards,
    Lakshmikanth

  • ME013 Document type RD33 not allowed with doc. ca tegory B

    When I try to post an SC, i get the following error: ME013 Document type RD33 not allowed with doc. ca tegory B.  I am on SRM 5.0.  I have maintained config (V_BBP_TARGET_OBJ) to create a PO if info complete and I have set up BSA in the org structure as ECPO.  My SC has a source assigned and looks to be complete, yet the system seems to want to create a PR and it is having difficulty doing so.  Any idea on how to troubleshoot this error message?

    Hello Richard,
    I guess RD33 is a PO doc type in your R/3 system.
    In that case, that means your SC tries to create a PR, but with the PO doc type RD33.
    But you said that you defined BSA = ECPO. So where comes RD33 from ?
    Can you tell me what is RD33 in your R/3: PR or PO doc type ?
    And if you have any reference to RD33 in SRM ?
    Rgds
    Christophe

  • Sales document type is not defined for(sales org/division/distribution chan

    Hi Friends,
    I am getting the error that sales document type is not defined for x/y/z(sales organisation/division/distribution channel). while creating sales order.
    Any pointers will be rewarded.
    Regards

    Hi there,
    When you define a sales doc type in VOV8, you also should assign that to the sales area SA (sales org / dist channel / division).
    Only then you will be log a sales order for a sales area.
    Check if you have done it. You will find it in SPRO --> Sales & Distribution --> Sales --> Sales doc header --> Assign sales doc type to SA.
    Regards,
    Sivanand

  • Output map: Document Type does not match any of the given schemas

    On a send port, we have a map that uses a custom xslt. We were hoping to somehow design the map so the output was essentially a generic xs:any schema.  But unless we ad a reference from our map assembly to the assembly that holds the actual schema for
    the message pertaining to the map out put we get an error:
    The Messaging Engine failed while executing the outbound map for the message going to the destination URL "C:\BizTalk\Test\%MessageID%.xml"
    with the Message Type http://test#testmessage. Details:"Document type "outputtest#outputtestmessage" does not match any of the given schemas.
    Is there a way to avoid having to have the reference? 

    Hi ,
    In BizTalk messages are distinct from each other based on the message type . In your case http://test#testmessage (Namespace#RootNode)
    Now coming to your case have you verified whether you have a schema type matching the response is deployed with the solution. The easy way is to look into specific BizTalk application schema node .
    If not ,What you can do is to create a new schema for output having "TestMessage" as record and any element inside it. After that apply a mass copy
    funtiod from source t destination(in your case any type schema created).
    Thanks
    Abhishek

  • The document type does not match any of the given schemas. batching

    I am aggregating messages(batching) in Orchestation by calling pipeline. I have send pipeline where I have standard assemble component and custom pipeline in encode to assign some values .
    When I test it I get following error There was a failure executing the send pipeline: "Zones._870.Pipeline.Send870Pipeline, Zones.870, Version=1.0.0.0, Culture=neutral, PublicKeyToken=51b3a99d8425ff5a" Source: "ZonesAssignGUID" Send
    Port: "SendToAX870" URI: "C:\File_Out\Ingram\870\%MessageID%.xml" Reason: The document type "http://schemas.microsoft.com/dynamics/2011/01/documents/Message#Envelope" does not match any of the given schemas.  
    Can somebody help me how to resolve this issue? 

    Yes this is configured schema as envelope schema. This one is deployed in biztalk . I tried whatever suggest below query and return one record. Not sure but looks like error message misguiding here.
    select * from BT_DocumentSpec where msgtype like '%http://schemas.microsoft.com/dynamics/2011/01/documents/Message#Envelope%'

  • Document type created not getting saved

    Hi all,
    In DC10 I created document type and saved but its not getting saved?
    I gave document type as CD and description as COREL DRAW and tried to save it, but its not getting saved and asking to fill the required fields so I filled
    Version no. Inc as   1
    class Type  as      017
    and class  as     cl0001
    and in Field selection:
    Class data as display
    document status as *Display and then tried to save but the save option is in hide mode.
    what is a characteristic and why do we require and how to give the naming convention or numbering to it?
    Because I cant see the previously created chars?
    Please answer
    Thx

    Thanks Aby for answering
    how to name the class and class type ?
    I can see the class types but not class, is it a number or any other name ?
    How to create character and what is the naming convention?
    if I created a class and class type and character for a document type in DC10 then will they be shown in display screen CV03N?
    Thx

  • Fb50 - document type is not appearing

    Dear all,
    what is the procedure to view fb50 document type it is not appearing in production server
    development server i can view that document type
    please guide
    Thanks & Regards,
    satishkumar.m

    HI,
    IN FB50 screen go to editing options in the top, in that select document type displayed, u can be able to see that in FB50.
    regards
    srikanth

  • I want to change Document Type of DIR in Prodution  for DMS Document

    Hi Expert,
    I have requirement to change to document type of the DIR which are uploaded and available right now in Production Server.
    If anyone knows BAPI of any procedure to do the same pls let me know.
    Thanks,
    Jay.

    Not possible.

  • ASKB(N): document type do not defined

    Hello all!
    When I start ASKBN befor  AFAB (sistem 6.0) I got a message "Document type  for periodic APC posting does not exist". Message no. AC197
    But when I went to OBA7 and look through the type AN with Net asset posting and tried to define the interval for it in FBN1, this interval was already exist and 4 document was posted. I set this interval for aquisition postings (abso). What to do with ASKBN? Or what document type should be defined for ASKBN?

    Hi,
           Go to IMG and assign the document type in the Path:
    Asset Accounting - Integration with General Ledger - Post APC values periodically to the General Ledger - Specify Document type for peridical Posting of Asset Values.
    Thanks,
    Raja.

  • Document Type "***" will not be added

    New installation of CS3 on a Vista machine. It was working
    fine right after installation last Thursday, but today upon opening
    20 messages "The Document Type "TLD, WML, Browser_Toolbar, HTML,
    EDML, etc." will not be added because it uses a file extension that
    is already associated with a prior Document Type." The 21st message
    reads, "The following translators were not loaded due to errors:
    ASP.htm has information duplicated by another translator.
    ASP>NET>htm, ColdFusion.htm, Date.htm, JSP.htm,
    PHP_MySQL.htm, Server Model SSI.htm ... " I installed the 7.0.1
    updater, but same problem. Appreciate any help with this.
    Thanks,
    Cathy

    cchristian wrote:
    > New installation of CS3 on a Vista machine. It was
    working fine right after
    > installation last Thursday, but today upon opening 20
    messages "The Document
    > Type "TLD, WML, Browser_Toolbar, HTML, EDML, etc." will
    not be added because it
    > uses a file extension that is already associated with a
    prior Document Type."
    Troubleshooting step 4 in the following technote will almost
    certainly
    solve the problem:
    http://www.adobe.com/go/tn_19105
    David Powers, Adobe Community Expert
    Author, "The Essential Guide to Dreamweaver CS3" (friends of
    ED)
    Author, "PHP Solutions" (friends of ED)
    http://foundationphp.com/

Maybe you are looking for