Document Type Not Found in Shift Note Settings

Dear gurus,
I'm implementing Ecc-dimp function, shift note report.
I check in PRD SPRO configuration:
Logistics General -> Make Settings for Shift Note, I have made one Shift Note Type "MS".
The settings from DEV Server (transport) is "DMO", but when I browse (F4), there's error "Document type DMO cannot be used".
I've CORRECTLY configured the document type in DMS in production (used by MM consultant for MARA attachment).
Then I check the settings in DEV server, and browse (F4) on the same configuration.
There's only one document type which can be used, that is "DMO"
Here's the error in PRD system:
[http://postimage.org/image/bjyus8a3x/]
Is it some SAP bug?
Thanks for help.
Best Regards,

We're running ECC 6.0 EhP4.
Technical component is 7.01 level 0009
Business software component is 604 level 0009
Latest kernel patch
Regards,

Similar Messages

Error 1046: Type was not found or was not a compile-time constant: Component Event.

Hi Everyone..
I am getting an Error 1046: Type was not found or was not a compile-time constant: Component Event.
The ComponentEvent class has been imported,and also the event handling code is there. I am not sure what else is wrong, hope somebody can advise me. Thanks. The code is below, the point where the error occurs as indicated by the compiler has been highlighted.
package
import flash.display.Sprite;
import flash.media.Camera;
import flash.media.Microphone;
import flash.media.Video;
import fl.controls.TextArea;
import fl.controls.Button;
import fl.controls.TextInput;
import flash.events.SyncEvent;
import flash.events.MouseEvent;
import flash.events.FocusEvent;
import flash.net.SharedObject;
import flash.net.NetConnection;
import flash.net.NetStream;
import flash.events.NetStatusEvent;
import flash.events.FocusEvent;
import flash.events.ComponentEvent;
public class VideoChat extends Sprite
private var button:Button;
private var text_so:SharedObject;
private var textArea:TextArea;
private var textInput:TextInput;
private var chatName:TextInput;
private var nc:NetConnection;
private var nsOut:NetStream;
private var nsIn:NetStream;
private var rtmpNow:String;
private var msg:Boolean;
private var cam:Camera;
private var mic:Microphone;
private var vid:Video;
public function VideoChat ()
   //Set up UI
   textArea = new TextArea();
   textArea.setSize(500,280);
   textArea.move(20,54);
   addChild(textArea);
   textInput = new TextInput();
   textInput.setSize(500,24);
   textInput.move(20,340);
   textInput.addEventListener(ComponentEvent.ENTER,checkKey);
   addChild(textInput);
   button = new Button();
   button.width=50;
   button.label="Send";
   button.move(20,370);
   button.addEventListener(MouseEvent.CLICK, sendMsg);
   addChild(button);
   chatName = new TextInput;
   chatName.setSize (100,24);
   chatName.move (80,370);
   chatName.text="<Enter Name>";
   chatName.addEventListener (FocusEvent.FOCUS_IN, cleanName);
   addChild(chatName);
   //Connect
   rtmpNow="rtmp:/VideoChat ";
   nc=new NetConnection;
   nc.connect (rtmpNow);
   nc.addEventListener(NetStatusEvent.NET_STATUS,doSO);
   cam = Camera.getCamera();
   mic=Microphone.getMicrophone();
   //Camera Settings
   cam.setKeyFrameInterval(15);
   cam.setMode (240, 180, 15, false);
   cam.setMotionLevel(35,3000);
   cam.setQuality(40000 / 8,0);
   //Microphone Settings
   mic.gain = 85;
   mic.rate=11;
   mic.setSilenceLevel (25,1000);
   mic.setUseEchoSuppression (true);
   //Video Setup
   vid=new Video(cam.width, cam.height);
   addChild (vid);
   vid.x=10, vid.y=20;
   //Attach local video and camera
   vid.attachCamera(cam);
private function doSO(e:NetStatusEvent):void
   good=e.info.code == "NetConnection.Connect.Success";
   if(good)
    //Set up shared object
    text_so=SharedObject.getRemote("test", nc.uri, false);
    text_so.connect (nc);
    text_so.addEventListener(SyncEvent.SYNC, checkSO);
private function checkSO(e:SyncEvent):void
   for (var chung:uint; change<e.changeList.length; chng++)
    switch(e.chageList[chng].code)
     case "clear":
      break;
     case "success":
      break;
     case "change":
      textArea.appendText (text_so.data.msg + "\n");
      break;
private function cleanName(e:FocusEvent): void
   chatName.text="";
private function sendMsg(e:MouseEvent):void
   noName=(chatName.text=="<Enter Name>" || chatName.text=="");
   if (noName)
     textArea.appendText("You must enter your name \n");
   else
    text_so.setProperty("msg", chatName.text +": " + textInput.text);
    textArea.appendText (chatName.text +": "+textInput.text +"\n");
    textInput.text="";
private function checkKey (e:ComponentEvent):void
   noName=(chatName.text=="<Enter Name>" || chatName.text=="");
   if (noName)
     textArea.appendText("You must enter your name \n");
   else
    text_so.setProperty("msg", chatName.text +": " + textInput.text);
    textArea.appendText (chatName.text +": "+textInput.text +"\n");
    textInput.text="";
//Create NetStream instances
private function checkConnect (e:NetStatusEvent):void
   msg=e.info.code == "NetConnection.Connect.Success";
   if(msg)
    nsOut=new NetStream(nc);
    nsIn=new NetStream(nc);
    //NetStream
    nsOut.attachAudio(mic);
    nsOut.attachCamera(cam);
    nsOut.publish("camstream");
    nsIn.play("camstream");

Hi Guys...
I have found out what is wrong. I was importing the wrong package the correct one should have been:
import fl.events.ComponentEvent;
instead of
import flash.events.ComponentEvent;
I hope this is helpful for anyone caught in a simillar situation as me...Thanks..

Copying from sales document type QTH to HU is not supported

guys i was trying to create a contract based on a quotation created by me here QTH is my quotation type and HU is my contract type the error i encountered was thiss.
Copying from sales document type QTH to HU is not supported .

Hi
In VTAA maintain the copy control settings from Quotation to Contract
I think you can copy the AV document type which is quotation for contract.
regards

Help! "1046: Type was not found or was not a compile-time constant:TimerEvent."

I am getting the followiing error in my main document class:
"1046: Type was not found or was not a compile-time constant:TimerEvent."
It's showing in line 47 and 54 (in red below). Any help would be appreciated. BTW, this is my first time creating a main document class since graduating to class files!:
package
    //**************** IMPORT STATMENTS *********************
    import flash.display.MovieClip;
    import com.greensock.TweenLite;
    import flash.utils.Timer;
    public class Main extends MovieClip
        //***************** Variables ***************************
        /*private var appStoreURL:URLRequest = new URLRequest("http://itunes.apple.com/us/artist/quackenworth/id518210161");
        private var facebookURL:URLRequest = new URLRequest("http://www.facebook.com/quackenworth");
        private var twitterURL:URLRequest = new URLRequest("http://www.twitter.com/quackenworth");*/
        private var MainScene:Main = new Main();
        private var PopUp_MoreApps:MoreApps_mc = new MoreApps_mc();
        private var PopUp_About:About_mc = new About_mc();
        //*****SPLASH SCREEN ***
        private var mc_timerSplash:Timer;
        private var splashScreen:mcSplashScreen;
        //*****************CONSTRUCTOR CODE ***********************************************************************************
        public function Main()
            mc_timerSplash = new Timer(3000,1);
            mc_timerSplash.addEventListener(TimerEvent.TIMER, StartTimer);
            //When timer is finished stop the timer;
            mc_timerSplash.addEventListener(TimerEvent.TIMER_COMPLETE, timerCompleted);
            splashScreen = new mcSplashScreen();
             addChild(splashScreen);
            splashScreen.x = stage.stageWidth / 2;
            splashScreen.y = stage.stageHeight / 2;
            mc_timerSplash.start();
        //*********** FUNCTIONS *********************************
        private function timerCompleted(e:TimerEvent):void
                mc_timerSplash.stop();
                mc_timerSplash = null;
        private function StartTimer(e:TimerEvent):void
            TweenLite.to(splashScreen, 1, {alpha:0, onComplete: SplashScreen});
        private function SplashScreen():void
            removeChild(splashScreen);
            addMainScene();
        private function addMainScene():void
            addChild(MainScene);
            MainScene.x = 489;
            MainScene.y = 350;
            //TweenLite.from(MainScene.wbbIntro_mc, .5, {alpha: 0});
            TweenLite.from(MainScene, 1, {alpha:0});
            TweenLite.to(MainScene.girls_mc, 1, {y:395, delay:.3});
            TweenLite.to(MainScene.boys_mc, .5, {y:396, delay: .6});
            TweenLite.to(MainScene.Joe_mc, .5, {y:339, delay: 1});
            TweenLite.to(MainScene.Paul_mc, .5, {y:322, delay:1.2});
        private function removeMainScene():void
            removeChild(MainScene);
            TweenLite.to(MainScene.girls_mc, .1, {y:690});
            TweenLite.to(MainScene.boys_mc, .1, {y:693});
            TweenLite.to(MainScene.Joe_mc, .1, {y:636});
            TweenLite.to(MainScene.Paul_mc, .1, {y:619});

Now that the error is solved, when I test nothing happens. I just get a blank screen.
What is supposed to happen? When the program opens a splash screen should be added for 3 seconds and then fade out. Then some main screen movie clips should be added to the stage.

Error:The network path was not found after shifting the development to a new machine

I hope I will find the solution here.
I'm developing my own content management system and I used the concept of URL Routing in ASP.NET and everything works just fine until I shifted developing my website from a desktop to a laptop. The problem happens only with the pages related to URL
Routing. Can anyone kindly guide me to solve this problem?
This is the full error stack:
Server Error in '/' Application.
The network path was not found
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.ComponentModel.Win32Exception: The network path was not found
Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.
Stack Trace:
[Win32Exception (0x80004005): The network path was not found]
[SqlException (0x80131904): A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)]
System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection, Action`1 wrapCloseInAction) +5294791
System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj, Boolean callerHasConnectionLock, Boolean asyncClose) +558
System.Data.SqlClient.TdsParser.Connect(ServerInfo serverInfo, SqlInternalConnectionTds connHandler, Boolean ignoreSniOpenTimeout, Int64 timerExpire, Boolean encrypt, Boolean trustServerCert, Boolean integratedSecurity, Boolean withFailover) +5307271
System.Data.SqlClient.SqlInternalConnectionTds.AttemptOneLogin(ServerInfo serverInfo, String newPassword, SecureString newSecurePassword, Boolean ignoreSniOpenTimeout, TimeoutTimer timeout, Boolean withFailover) +145
System.Data.SqlClient.SqlInternalConnectionTds.LoginNoFailover(ServerInfo serverInfo, String newPassword, SecureString newSecurePassword, Boolean redirectedUserInstance, SqlConnectionString connectionOptions, SqlCredential credential, TimeoutTimer timeout) +889
System.Data.SqlClient.SqlInternalConnectionTds.OpenLoginEnlist(TimeoutTimer timeout, SqlConnectionString connectionOptions, SqlCredential credential, String newPassword, SecureString newSecurePassword, Boolean redirectedUserInstance) +307
System.Data.SqlClient.SqlInternalConnectionTds..ctor(DbConnectionPoolIdentity identity, SqlConnectionString connectionOptions, SqlCredential credential, Object providerInfo, String newPassword, SecureString newSecurePassword, Boolean redirectedUserInstance, SqlConnectionString userConnectionOptions) +434
System.Data.SqlClient.SqlConnectionFactory.CreateConnection(DbConnectionOptions options, DbConnectionPoolKey poolKey, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningConnection, DbConnectionOptions userOptions) +225
System.Data.ProviderBase.DbConnectionFactory.CreatePooledConnection(DbConnectionPool pool, DbConnectionOptions options, DbConnectionPoolKey poolKey, DbConnectionOptions userOptions) +37
System.Data.ProviderBase.DbConnectionPool.CreateObject(DbConnectionOptions userOptions) +558
System.Data.ProviderBase.DbConnectionPool.UserCreateRequest(DbConnectionOptions userOptions) +67
System.Data.ProviderBase.DbConnectionPool.TryGetConnection(DbConnection owningObject, UInt32 waitForMultipleObjectsTimeout, Boolean allowCreate, Boolean onlyOneCheckConnection, DbConnectionOptions userOptions, DbConnectionInternal& connection) +1052
System.Data.ProviderBase.DbConnectionPool.TryGetConnection(DbConnection owningObject, TaskCompletionSource`1 retry, DbConnectionOptions userOptions, DbConnectionInternal& connection) +78
System.Data.ProviderBase.DbConnectionFactory.TryGetConnection(DbConnection owningConnection, TaskCompletionSource`1 retry, DbConnectionOptions userOptions, DbConnectionInternal& connection) +167
System.Data.ProviderBase.DbConnectionClosed.TryOpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory, TaskCompletionSource`1 retry, DbConnectionOptions userOptions) +143
System.Data.SqlClient.SqlConnection.TryOpen(TaskCompletionSource`1 retry) +83
System.Data.SqlClient.SqlConnection.Open() +96
System.Data.Common.DbDataAdapter.FillInternal(DataSet dataset, DataTable[] datatables, Int32 startRecord, Int32 maxRecords, String srcTable, IDbCommand command, CommandBehavior behavior) +121
System.Data.Common.DbDataAdapter.Fill(DataSet dataSet, Int32 startRecord, Int32 maxRecords, String srcTable, IDbCommand command, CommandBehavior behavior) +316
System.Data.Common.DbDataAdapter.Fill(DataSet dataSet, String srcTable) +86
System.Web.UI.WebControls.SqlDataSourceView.ExecuteSelect(DataSourceSelectArguments arguments) +3387
System.Web.UI.WebControls.BaseDataList.GetData() +91
System.Web.UI.WebControls.DataList.CreateControlHierarchy(Boolean useDataSource) +488
System.Web.UI.WebControls.BaseDataList.OnDataBinding(EventArgs e) +97
System.Web.UI.WebControls.BaseDataList.DataBind() +131
System.Web.UI.WebControls.BaseDataList.EnsureDataBound() +97
System.Web.UI.WebControls.BaseDataList.CreateChildControls() +123
System.Web.UI.Control.EnsureChildControls() +171
System.Web.UI.Control.PreRenderRecursiveInternal() +138
System.Web.UI.Control.PreRenderRecursiveInternal() +337
System.Web.UI.Control.PreRenderRecursiveInternal() +337
System.Web.UI.Control.PreRenderRecursiveInternal() +337
System.Web.UI.Control.PreRenderRecursiveInternal() +337
System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +5049

From logs found below issue, it seems remote connections are not allowed:
[SqlException (0x80131904): A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured
to allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)]
Check the below links to trouble shoot this
http://blog.sqlauthority.com/2009/05/21/sql-server-fix-error-provider-named-pipes-provider-error-40-could-not-open-a-connection-to-sql-server-microsoft-sql-server-error/
http://forums.asp.net/t/1454592.aspx
Please click the Mark as answer button and vote as helpful if this reply solves your problem

Copying from sales document type L2 to RK is not supported

Dear Experts,
Can any guide me please regarding my issue,
My process is linked with service order,after creation of service order,I am going to DP90 Tcode with this it will generate debit memo request,and I will do the billing from vf01.
Now I want to make some invoice correction,
so I have copied the standard RK invoice correction document to ZRK
and i have assign this for my sales area in sales document header,
now I have raised the order from va01,and I have given the invoice document number,
its showing this error u201CCOPYING FROM SALES DOCUMENT TYPE L2 TO ZRK IS NOT SUPPORTEDu201D
for this I think I have to maintain the copy controls,
can any one help me out how to maintain the copy controls for invoice correction.

Dear JP,
As you said I have maintained the item category,I have only two item categories,one is L2N,L2W.
I have copied the standard document from VTAF,and I have maintained the copy controls like this,
Copied from RK to F2 as ZRK to ZL2 header data
Data T   052 billing doc header
Data T 103   billing bus header data
Data T 003   billing header partner
Copying requirements as   021 billing header
Tick on copy item number
Then item category maintained as
Item category as L2N
Data T 153 Item from billing document
Data T 104 billing bus item data
Data T 004   billing item partner
Copying requirements as 000
Pricing type         u201CEu201D
2nd pricing type u201CDu201D
And the same for L2W,but I have not maintained for u201CG2Nu201Ditem category,but I has copied automatically?
Then I have raised the sales order from va01,its ask the billing document number,I have given the billing doc number and press on copy,its has open the sales order,
Here I have two issues,
1st its generating the two same line items,with G2N item category
EG:if I have given 2 materials line items then its generating the 4 line items with the same material.
2nd I am not able edit any line litem,it all are coming in non editable mode,how to make editable field,and make the changes for price and quantity.
After saving the document again I have to do the billing from vf01?
please suggest me,so this will be added advantage to the user.

Trouble adding a web url link to an existing file: 1046: Type was not found or was not a compile-time constant:

Hi There,
We're trying to add a simple link to an existing Flash file. There looks to be at least 7 separate .as files and a separate swf that loads the main swf which all seems overly complex for what is essentially a page with six buttons on it.
However, we need to add a URL to some of the text. So we converted the text to a button, added an instance name of <ssbpurchasetickets_btn> then added the following Actionscript into the actions layer on the frame the text/button appears:
ssbpurchasetickets_btn.addEventListener(MouseEvent.CLICK, ssbButtonPurchase);
function ssbButtonPurchase(event:MouseEvent):void
navigateToURL(new URLRequest("http://www.url.com/tickets.html"));
When we publish the file we get the following error which seems to cascade into a whole bunch more errors:
Description: 1046: Type was not found or was not a compile-time constant: MouseEvent.
Source: function ssbButtonPurchase(event:MouseEvent):void
We added "ssb" onto the button and functions to ensure there were no conflicts but the same thing occurred. If we copy the button into a new file everything works so it must be conflicting with something in the main files.
Any help would be MUCH appreciated!!!!
Cheers

Thanks for the reply Ned,
The file is set to use AS3 and I'm pretty sure the original should be set to AS3 as the .as files look like AS3 syntax to me - here's a sample:
protected function handleWwrdButtonClick(e:ButtonEvent):void {
Browser.open(globalVar.xml.wwrd.item[0].@url, globalVar.xml.wwrd.item[0].@target);
OmnitureTracker.trackFeaturedContentClick('http://www.url.com/movies/international', 'wwrd_button');
timer.stop();
timer.removeEventListener(TimerEvent.TIMER, onTimer);
I'm wondering if all the Actionscript has be placed into one of the .as files as there isn't any Actionscript in the Flash project - a part from the odd stop()
Really stuck on this one (I'm not an expert at all) so any help in deciphering the project would be much appreciated.
Cheers

1046: Type was not found or was not a compile-time constant: Event.

I am more than a little frustrated. I'm using Flash Professional CS5.5, attempting to publish ActionScript 3.0 for FlashPlayer 10.2
My code begins with:
import flash.events.MouseEvent;
import flash.events.Event;
import flash.events.KeyboardEvent;
import flash.utils.Timer;
import flash.events.TimerEvent;
Then much later I have:
teamFourCar_mc.addEventListener(Event.ENTER_FRAME, trackPosition);
function trackPosition (event:Event)
and I keep getting a compiler error:
Scene 1, Layer 'actions', Frame 1, Line 434
1046: Type was not found or was not a compile-time constant: Event.
I have imported the class "Events". I have successfully used the same construction in other scripts... in fact, virtually the same construction is included in Code Snippets as Fade In and Fade Out. Adding ":void" after (event:Event) makes no difference. I have Googled - to no avail - and spent the better part of a day reading through the on-line help files, but the solution is still eluding me.
It's probably so simple I'm going to smack myself in the forehead and mutter "Duh!" when I find a solution...
If you can do anything to hasten that event (no pun intended) I (with the possible exception of my forehead) will be very grateful.
TIA
Terry

Sinious:
The entire code of the main movie clip is at http://pastebin.com/JYfLUhh1
A sample of one of the four "problem" movie clips is at http://pastebin.com/gQGDyngx
There is nothing wrong with the "problem" clip. The problems are in the main movie clip:
Scene 1, Layer 'actions', Frame 1, Line 427
1046: Type was not found or was not a compile-time constant: Event.
Scene 1, Layer 'actions', Frame 1, Line 612
1046: Type was not found or was not a compile-time constant: Event.
Scene 1, Layer 'actions', Frame 1, Line 1819
1046: Type was not found or was not a compile-time constant: Event.
There are the only three occurrences of a function with (event:Event). Two are ENTER_FRAME (427 & 1819) The other is COMPLETE from Loader.info
Auto format reported a syntax error "near 'if(movingCar.currentFrame == (dieRoll * 24) + movingCarPosition)' " but I can't detect what, if anything, is wrong with it.
I'm not an experienced developer... in fact, the last programming I did before taking up Flash three months ago was with QuickBasic under DOS 6.2... therefore, please try not to roll your eyes too much when you see how inelegant the code is.
I have a working version, but it's over 7,000 lines and a memory hog. I'm trying to make it more elegant and more efficient. BTW, the three (event:Event) functions are in the working version in more or less the same places, with the same calling code.
I hope you can figure it out.
Thank you in advance

Type was not found or was not a compile-time constant?

Hi guys,
I'm going nuts. I've got this movieclip that I made into a
button with ActionScript. When clicked, it
should go to a frame in my main timeline labeled "beansbus",
but whenever I try to test the movie out, Flash
gives me this error:
1046: Type was not found or was not a compile-time constant:
bus.
I've looked around on the internet and I've been told that
this error can
crop up if the instance name is the same as a library object.
That WAS the
problem, but I renamed the library object to Cutebus, so that
should have fixed it, I hope. There was another fix that involved
something called TextFields in my movieclip, but I don't have
those...
My code looks like this, which was copied and pasted from an
in-class tutorial that DOES work, with no problems.
Thanks in advance for any light you can shed on this.

actually the error:
quote:
TypeError: Error #1009: Cannot access a property or method of
a null object reference. at
beans_fla::MainTimeline/frame1()[beans_fla.MainTimeline::frame1:3]
may not obviously give the line number at first
glance, but it does! 'frame 1:3' refers to frame 1, line 3. which
if your code post was accurate to line numbers, refers to:
quote:
bus.stop();
so i'd suggest looking at your bus clip and
ensuring that you have correctly defined its instance name. Also,
make sure you have this correctly defined in each keyframe that the
clip appears.

A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (p

A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that
the instance name is correct and that SQL Server is configured to allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)(Microsoft SQL Server, Error: 2)
The system cannot find the file specified
Cannot connect to COWBOYS.
Here are the technical details===================================
A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider:
Named Pipes Provider, error: 40 - Could not open a connection to SQL Server) (.Net SqlClient Data Provider)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft%20SQL%20Server&EvtSrc=MSSQLServer&EvtID=2&LinkId=20476
Error Number: 2
Severity: 20
State: 0
Program Location:
at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection, Action`1 wrapCloseInAction)
at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj, Boolean callerHasConnectionLock, Boolean asyncClose)
at System.Data.SqlClient.TdsParser.Connect(ServerInfo serverInfo, SqlInternalConnectionTds connHandler, Boolean ignoreSniOpenTimeout, Int64 timerExpire, Boolean encrypt, Boolean trustServerCert, Boolean integratedSecurity, Boolean withFailover)
at System.Data.SqlClient.SqlInternalConnectionTds.AttemptOneLogin(ServerInfo serverInfo, String newPassword, SecureString newSecurePassword, Boolean ignoreSniOpenTimeout, TimeoutTimer timeout, Boolean withFailover)
at System.Data.SqlClient.SqlInternalConnectionTds.LoginNoFailover(ServerInfo serverInfo, String newPassword, SecureString newSecurePassword, Boolean redirectedUserInstance, SqlConnectionString connectionOptions, SqlCredential credential, TimeoutTimer
timeout)
at System.Data.SqlClient.SqlInternalConnectionTds.OpenLoginEnlist(TimeoutTimer timeout, SqlConnectionString connectionOptions, SqlCredential credential, String newPassword, SecureString newSecurePassword, Boolean redirectedUserInstance)
at System.Data.SqlClient.SqlInternalConnectionTds..ctor(DbConnectionPoolIdentity identity, SqlConnectionString connectionOptions, SqlCredential credential, Object providerInfo, String newPassword, SecureString newSecurePassword, Boolean redirectedUserInstance,
SqlConnectionString userConnectionOptions, SessionData reconnectSessionData)
at System.Data.SqlClient.SqlConnectionFactory.CreateConnection(DbConnectionOptions options, DbConnectionPoolKey poolKey, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningConnection, DbConnectionOptions userOptions)
at System.Data.ProviderBase.DbConnectionFactory.CreateNonPooledConnection(DbConnection owningConnection, DbConnectionPoolGroup poolGroup, DbConnectionOptions userOptions)
at System.Data.ProviderBase.DbConnectionFactory.TryGetConnection(DbConnection owningConnection, TaskCompletionSource`1 retry, DbConnectionOptions userOptions, DbConnectionInternal oldConnection, DbConnectionInternal& connection)
at System.Data.ProviderBase.DbConnectionInternal.TryOpenConnectionInternal(DbConnection outerConnection, DbConnectionFactory connectionFactory, TaskCompletionSource`1 retry, DbConnectionOptions userOptions)
at System.Data.ProviderBase.DbConnectionClosed.TryOpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory, TaskCompletionSource`1 retry, DbConnectionOptions userOptions)
at System.Data.SqlClient.SqlConnection.TryOpenInner(TaskCompletionSource`1 retry)
at System.Data.SqlClient.SqlConnection.TryOpen(TaskCompletionSource`1 retry)
at System.Data.SqlClient.SqlConnection.Open()
at Microsoft.SqlServer.Management.SqlStudio.Explorer.ObjectExplorerService.ValidateConnection(UIConnectionInfo ci, IServerType server)
at Microsoft.SqlServer.Management.UI.ConnectionDlg.Connector.ConnectionThreadUser()
===================================
The system cannot find the file specified
I have tried from so many forms. This is so frustrating. Thank for everyone/anyone who wants to help. So this is what happened: I had to uninstall my previous sqlserver 2012(which worked great) for some reason, and I uninstalled everything from that download.
Then I installed the trial edition of sql server 2012 (64 Bit) and It wouldn't connect to the database. (Error mentioned above.) My local DB is COWBOYS. (COWBOYS is also my computer name.) After this, I have tried downloading sqlexpress and sqlserver 64bit
many times and cannot connect to my local DB.
How do I connect to my Local DB?
Also, I think this might help: (When I run sqlserve.exe, which I was able to find in C:\Program Files\Microsoft SQL Server\110\LocalDB\Binn, I get an error: Your SQL server installation is either corrupt or has been tampered with(Error getting
instance ID from name). Please uninstall then re-run setup to correct this problem.
I would happily re install it, if it wasn't my 20th time.
I don't have any remote connections, I don't use username/password, only window authentication. I work mostly on visual studio, but without able to store /retrieve data, I don't know how to survive.
May be the solution is very simple, but I am too frustrated.
Some of the things I have tried:
From a command prompt, enter one of the following commands:
net start "SQL Server Agent (MSSQLSERVER)" OR
net start "SQL Server Agent(instancename)"(for instance)
on my sql configuration, I cannot start anything because there is nothing there to start. I can post more details, if that would help. Also, some more details about the error:
Details
Product:
SQL Server
ID:
2
Source:
MSSQLServer
Version:
10.0
Component:
SQLEngine
Message:
An error has occurred while establishing a connection to the server. When connecting to SQL Server, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error:
40 - Could not open a connection to SQL Server) (.Net SqlClient Data Provider)
Explanation
SQL Server did not respond to the client request because the server is probably not started.
User Action
Make sure that the server is started.
Version:
9.0
Component:
SQLEngine
Message:
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error:
40 - Could not open a connection to SQL Server) (.Net SqlClient Data Provider)
Explanation
SQL Server did not respond to the client request because the server is probably not started.
User Action
Make sure that the server is started.
Any one that can help me, I will be greatful. Thank you so much. p.s. please ask me anything if you have any questions.

It sounds like there are a couple things going on here. First check if you have a successful install of SQL Server, then we'll figure out the connection issues.
Can you launch SQL Server Configuration Manager and check for SQL Server (MSSQLSERVER) if default instance or SQL Server (other name) if you've configured your instance as a named instance. Once you find this, make sure the service is started.
If not started, try to start it and see if it throws an error. If you get an error, post the error message your hitting. If the service starts, you can then launch SSMS and try to connect. If you have a default instance, you can use the machine
name in the connection dialog. Ex: "COWBOYS" where Cowboys is the machine name. However, if you named the SQL Server instance during install, you'll need to connect using the machine\instance format. Ex: COWBOYS\Romo (where Romo
is the instance name you set during install).
You can also look at the summary.txt file in the SQL Server setup error logs to see what happened on the most recent install. Past install history is archived in the log folder if you need to dig those up to help troubleshoot, but the most
recent one may help get to the bottom of it if there is an issue with setup detecting a prior instance that needs to be repaired.
Thanks,
Sam Lester (MSFT)
http://blogs.msdn.com/b/samlester
This posting is provided "AS IS" with no warranties, and confers no rights. Please remember to click
"Mark as Answer" and
"Vote as Helpful" on posts that help you. This can be beneficial to other community members reading the thread.

Connecting to the LOB system has failed. A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is

hi ,
when generate the schema , i got the below error, please any one put your inputs:
Connecting to the LOB system has failed. A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server
is configured to allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server).

thaks shanky,
but facing another , after generate schema from WCF_SQL, im unable get elements in my schema.
this is schema generate from storeprocduer , but thru WCF-sql im unable get the elements like
id, name
<xsd:schema targetNamespace="urn:schemas-microsoft-com:sql:SqlRowSet2" xmlns:schema="urn:schemas-microsoft-com:sql:SqlRowSet2" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:sqltypes="http://schemas.microsoft.com/sqlserver/2004/sqltypes" elementFormDefault="qualified">
<xsd:import namespace="http://schemas.microsoft.com/sqlserver/2004/sqltypes" schemaLocation="http://schemas.microsoft.com/sqlserver/2004/sqltypes/sqltypes.xsd" />
<xsd:element name="Test.dbo.sample">
<xsd:complexType>
<xsd:sequence>
<xsd:element name="id" type="sqltypes:int" minOccurs="0" />
<xsd:element name="name" minOccurs="0">
<xsd:simpleType>
<xsd:restriction base="sqltypes:nvarchar" sqltypes:localeId="1033" sqltypes:sqlCompareOptions="IgnoreCase IgnoreKanaType IgnoreWidth" sqltypes:sqlSortId="52">
<xsd:maxLength value="1000" />
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
</xsd:sequence>
</xsd:complexType>
</xsd:element>
</xsd:schema>
<Test.dbo.sample xmlns="urn:schemas-microsoft-com:sql:SqlRowSet2">
<id>18</id>
<name>BIRADAR</name>
</Test.dbo.sample>
<Test.dbo.sample xmlns="urn:schemas-microsoft-com:sql:SqlRowSet2">
<id>18</id>
<name>BIRADAR</name>
</Test.dbo.sample>
<Test.dbo.sample xmlns="urn:schemas-microsoft-com:sql:SqlRowSet2">
<id>19</id>
<name>sw</name>
</Test.dbo.sample>
<Test.dbo.sample xmlns="urn:schemas-microsoft-com:sql:SqlRowSet2">
<id>18</id>
<name>BIRADAR</name>
</Test.dbo.sample>
<Test.dbo.sample xmlns="urn:schemas-microsoft-com:sql:SqlRowSet2">
<id>14</id>
<name>swe</name>
</Test.dbo.sample>
<Test.dbo.sample xmlns="urn:schemas-microsoft-com:sql:SqlRowSet2">
<id>13</id>
<name>se</name>
</Test.dbo.sample>

A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections.

A network-related or instance-specific error occurred while establishing a connection to SQL Server. The
server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider: SQL Network Interfaces, error: 26- Error:Locating Server\instance Specified)
How Can i solve this?

1. Make sure SQL Server Service is running
2. If a named instance, make sure SQL Server browser service is running
3. Make sure SQL Server is configured to allow remote connections
4. Examine the SQL Server error log for messages confirming that SQL is listening on the expected network interfaces and ports
5. Test server connectivity with PING from the client machine
6. Test port connectivity using TELNET or PowerShell to the server and port (from step 4) from the client machine. For example
a. TELNET <server-name> 1433
b. PowerShell: 1433 | % { echo ((new-object Net.Sockets.TcpClient).Connect("YourServerName",$_)) "server listening on TCP port $_" }
7. Check firewall settings if step 5 or 6 connectivity test fails
Best Regards,Uri Dimant SQL Server MVP,
http://sqlblog.com/blogs/uri_dimant/
MS SQL optimization: MS SQL Development and Optimization
MS SQL Consulting:
Large scale of database and data cleansing
Remote DBA Services:
Improves MS SQL Database Performance
SQL Server Integration Services:
Business Intelligence

Publish to folder but website says: 'Not Found: Resource does not exist'

Hi Everyone,
I'm new here so I apologise sincerely if a similar question has been asked and answered.
Well, I am currently trying to make a webpage for my mom on iWeb 08 and we also purchased a personal domain name. We are really new to this so I suppose its all still a bit confusing..
I figured out we needed to enter a 'CNAME' into the domain site in order for our iWeb pages to get redirected to her site. And so we put in 'web.me.com' (I think) and were told that it 'should' work. So when I went to her personal URL, it initially asked for a username and password (even though I did not set one up through iWeb). I typed in her personal username and password as this was the only plausible one I could think of... but then the page loaded and the only thing it says is "Not Found: Resource does not exist."
I'm not sure what is wrong - did I input the wrong CNAME or was I supposed to do something else as well as "Publish to a folder" --> then enter the URL for the site at bottom...?
Would really appreciate some feedback - so lost right now!!

Why are you publishing to a folder? You only need to do this if you are uploading directly to the domain webspace and you need an ftp client to do this such as Cyberduck.
CNAME is only used if you are publishing the site to a MobileMe account and you are forwarding the domain to your MMe account?
What is it that you are doing?
If using CNAME, then you need to go to your MMe account and enter the domain name under the personal section, enter personal domain. Then publish your site and then go to your domain name registrar and go to the DNS settings and set the CNAME up to forward to web.me.com.
If you are using CNAME forwarding, then from within iWeb you need to click on Publish All to MobileMe and NOT TO A FOLDER. The folder option is ONLY if you are uploading directly with ftp to your domain space.

Premiere claims Media Cache directory was not found or is not writable.

Premiere claims Media Cache directory was not found or is not writable. I then change the cache settings to an external drive then it crashes regardless of whether I open an existing file or create a new one. I've re-installed, deleted preferences etc. Often when it doesn't crash, it will say file was created in a newer version of Premiere Pro. Losing hair, please help?

Okay! So, immediately after my last post, I solved the problem.
I deleted the cache files in the default directory "C:\Users\"USERNAME"\AppData\Roaming\Adobe\Common" then this stopped the crashing.
There appears to have been updates via Creative Cloud so this must've caused dramas with the existing project files. So a fresh install + the deleting of the cache files, then the changed settings of Media cache locations seems to help.
Thanks for those who tried to help!
Cheers,
Tom

Since I downloaded Snow Leopard on my iMac, my HP all-in-one C7280 scanner will not work. It says "scanner not found, scanner could not be initialized". Any ideas?

Since I downloaded Snow Leopard on my iMac, my HP all-in-one C7280 scanner will not work. It says "scanner not found, scanner could not be initialized". Any ideas?

Hi,
I suggest uninstalling the printer drivers from your HP printer. The go to System Preferences> Printer & Fax and in the printer list box go ahead and reset the printing system. Do that by right clicking over the printer list box ad the option should appear. After that close system preferences and reinstall your printer drivers from the HP CD. After installation check if your printer works as expected, if it does, stop here and ignore the rest of the message.
If you don't have the install CDs for the printer or the previous step does not work; connect your printer to your Mac via USB and then again go to system preferences. Open the Print & Fax menu and in the printer list box you should see a "+" sign. Click on it, and a new window should appear with a list of printers that are available to you. If that's the case, go ahead click your printer name and wait for the computer to look in the Apple servers for the drivers. When searching is finished click the "install" button. This process will open software update and install the neccesary drivers.
After that, you should be able to scan documents with the Preview App.
For more information on the printing system in OS X Snow Leopard visit:
http://support.apple.com/kb/HT3771
Hope this helps!

Document Type Not Found in Shift Note Settings

Similar Messages

Maybe you are looking for