Document types Doc status RU can not reach OB or FR - IMG configuration

Hi
A new document status which comes after FR has to be created. I did this but when I create a new document in CV01N, and changed the status until I reach RU, the status which I configured in IMG ánd which is the one before FR, can not be seen and chosen. Do you know how to configure the status that are allowed to come after in the IMG?
Thanks in advance.
Esra

Hi Esra,
when you defined status without prev1 to prev6 values this status is everytime possible (excetion status type primary)
your status-network is RU->FR->OB ?
in status FR prev1= RU
in status OB prev1=FR
or your status-nettwork ist FR->RU->OB ?
in status RU prev1 = FR
inst stauts OB prev1 = RU
your frist status ?? ist type "P" primary with no prev1 value.
This status can be set only one time by creating DIR. So you can define your own statusnetwork!
Hope this will help you!
Regard Wolfgang
Edited by: Wolfgang Gabloner on Oct 19, 2009 4:24 PM

Similar Messages

Copying from sales document type L2 to RK is not supported

Dear Experts,
Can any guide me please regarding my issue,
My process is linked with service order,after creation of service order,I am going to DP90 Tcode with this it will generate debit memo request,and I will do the billing from vf01.
Now I want to make some invoice correction,
so I have copied the standard RK invoice correction document to ZRK
and i have assign this for my sales area in sales document header,
now I have raised the order from va01,and I have given the invoice document number,
its showing this error u201CCOPYING FROM SALES DOCUMENT TYPE L2 TO ZRK IS NOT SUPPORTEDu201D
for this I think I have to maintain the copy controls,
can any one help me out how to maintain the copy controls for invoice correction.

Dear JP,
As you said I have maintained the item category,I have only two item categories,one is L2N,L2W.
I have copied the standard document from VTAF,and I have maintained the copy controls like this,
Copied from RK to F2 as ZRK to ZL2 header data
Data T   052 billing doc header
Data T 103   billing bus header data
Data T 003   billing header partner
Copying requirements as   021 billing header
Tick on copy item number
Then item category maintained as
Item category as L2N
Data T 153 Item from billing document
Data T 104 billing bus item data
Data T 004   billing item partner
Copying requirements as 000
Pricing type         u201CEu201D
2nd pricing type u201CDu201D
And the same for L2W,but I have not maintained for u201CG2Nu201Ditem category,but I has copied automatically?
Then I have raised the sales order from va01,its ask the billing document number,I have given the billing doc number and press on copy,its has open the sales order,
Here I have two issues,
1st its generating the two same line items,with G2N item category
EG:if I have given 2 materials line items then its generating the 4 line items with the same material.
2nd I am not able edit any line litem,it all are coming in non editable mode,how to make editable field,and make the changes for price and quantity.
After saving the document again I have to do the billing from vf01?
please suggest me,so this will be added advantage to the user.

Copying from sales document type QTH to HU is not supported

guys i was trying to create a contract based on a quotation created by me here QTH is my quotation type and HU is my contract type the error i encountered was thiss.
Copying from sales document type QTH to HU is not supported .

Hi
In VTAA maintain the copy control settings from Quotation to Contract
I think you can copy the AV document type which is quotation for contract.
regards

Can someone please help me figure out why I keep getting the "can not reach server" when I try to download the ebook? This is happening with Adobe Digital Editions.

When I try to download the ebook I bough, the Adobe Digital Reader shows the following message: "can not reach server". Can someone please help me with this?
TO be precise, it says "licensee server communication problem"
Thank you

The thread running through your explanation has to do with connectivity to your server. (iCloud out of the blue asking for password, unable to message your boyfriend, unable to access e-mail). You said that you boyfriend restart his device and then the two of you were able to then imessage. My best advice for you would be to go to settings to reset to reset network settings. Once this has been done you then will need to enter the name and password of your wifi. ONce this is done you then can attempt to check to see that all passwords are enter correctly.
Good luck.

I can not reach to my accounts on computer since it says that 'connection server to .... is timed out'.

I can not reach to my accounts on computer since it says that 'connection server to .... is timed out'. However, I can get my emails through my iphone. How can I make my accounts work on computer? This problem occurs occasionally but create a big problem for my works...

If the iPads are Counterfeit then Apple will have nothing to do with them except maybe try to find the Counterfeiters and charge them.
It's the usual story... If something is too good or cheap to be true it probably is.

After downloading Yosemite, my Ps CS4 doesn't work. It says install legacy Java SE 6, but when i go ok, or, more info can not reach any point to have it!!!

After downloading Yosemite, my Ps CS4 doesn't work. It says install legacy Java SE 6, but when i go ok, or, more info can not reach any point to have it!!! What will I do?

I have similar issues and was referred to a knowledge base article support.apple.com/kb/DL1572 This seems to corrected the issue.

I can not reach the screen to enter passcode, the main sreen is where im stuck, i cant play music, the home button works but icant get pass the whole unlock thing, i can receive calls but can answer because when i touch the screen it wont do.

i can not reach the screen to enter passcorde, the main screen is where im stuk, i cant play music,i can recive calls

Try to Reset your device.
Press and hold both the Sleep/Wake button and the Home button for at least ten seconds, until the Apple logo appears (ignore the Slide to Power Off that shows up first).

I can not reach my gmail account

i can not reach my gmail account nor my hotmail account
moreover ican not use my keyboard short cuts now though it worked well initially
regards
nawabdera

Contact Google.

DESPERATE FOR HELP since downloading a separate outlook (from fast hosts) as addition to office mac 11 I can no longer access any Microsoft aps or documents including outlook - error messages 'can not change to identity for outlook'

I had office 2011 installed on my computer without outlook - been working fine.
I was given a trial of outlook decided against it at time due to cost - however my server provider fasthost have been offering outlook for free with a busines mail package. Trying to install it wouldn't due to the trail versions - so they gave me a step by step guide to remove outlook files.
Once i completed this the new outlook worked fine for 24 hours - however then we noticed all of our office programmes had been removed aka can not access any data and we are a management consultancy. Then fasthost recommended we reinstall out orginal office CD which I did and then all of sudden when download was completed everything now is inaccessable.
When I open outlook the message relays ' can not change to that idenity' I have tried to set up a new idenity and change permissions and even rebuilding it as per on line guides but when rebuilding it fails at the first step
Rest of office IE WORD, EXCEL I just get microsforft has encountered a problem and needs to close unexpectidly everytime I try and click into it.
I am now despirate as this is the second day we have had no access to anything and 6 day we have had no access to our documents \
FASTSHOST do everything via email and no incoming phone line (which they will give anyway) so I really need help
Any options advice greatly recieved
I am also using the most recent software and have been doing regular software updates OS X Lion.

I, too am wondering if it's the download site. I am not aware of any way to download Outlook Mac 2011 alone from any site including Microsoft's.
It is common for unscrupulous sites to offer desirable but pirated software for a modest price, but serve it up with a dose malware. They get you money, possible a credit card number, your e-mail, your IP address, and all you get is pain.
There was an "Outlook Express" for Mac that was freely distrubuted but I'll pretty sure that it never ran natively under OSX. The first OSX native version fo Office:Mac was Office X, and it introduced Entourage as the Mac mail client.
IF Fast Hosts is your ISP, I'd certainly talk to them to figure out what you downloaded.

Document type with posting level 12 not being carryforward

Hi gurus,
We are now implementing SEM-BCS 6.0 in the BI 7.0 server.
We have a document type u201CMIu201D which properties are:
Posting level: 12
Balance check: 0 error when balance note equal to zero
Application: Other
Posting: Manual posting
Inversion: No automatic inversion
The problem is that when we execute the Balance Carryforward in the subsequent year this is the only document type that is not being carryforward.
Why is this happening?
Thanks for your help.
Best regards.

This is by design
http://help.sap.com/saphelp_erp60_sp/helpdata/en/0c/ab0240536fe369e10000000a155106/content.htm
"Data records for preparatory postings for consolidation group changes are neither translated nor carried forward."
I'll try an example...
Company A is sold from company 1 to company 2 in June (EoP)
For periods 0 - 6:
BCS reports company A's balance sheet under company 1
BCS reports company A's income statement under company 1
starting period 7
BCS reports company A's balance sheet under company 2
BCS reports company A's 0 - 6 income statement under company 1
BCS reports company A's 7 income statement under company 2
this is managed through the posting level 02 12 and 22 document types, as well as PL30 if using CoI.
Assuming the period of first consolidation and period of divestiture were set correctly in the groups for company 1 and company 2, BCS wants to read all 0 - 6 data under group 1 and all 7 + data under group 2. This is obviously incorrect from an accounting standpoint and the PCC postings correct that.
So BCS books a PL02/12/22 in group 1 to zero out the balance sheet. It then books another set of entries in group 2 to write up the entire balance sheet in the new group.
However, once you get to the end of the year and run your BCF, the entire balance sheet is now sitting in period 0. The system is able to report company A's balance sheet under group 2 withou the aid of the PCC documents. Therefore, the system does not roll these documents forward into the new year.
The PCC documents were only required because of the periodic nature of the BCS data storage vs. the LTD nature of the balance sheet for reporting. Once the full LTD balance is available in a single period, as is the case just after a BCF, the PCC documents are no longer required.
Anyway, hope that made some sense. If not, I'd encourange you to create an Excel sheet replicating how BCS stores the data in the cube, perfrom a divestiture, and see why the system is not carrying forward the documents. This is how I came to understand it.
Now, if you're doing something "non-standard" with the PL12, all bets are off
Good luck,
Chris

I can not reach a phone number in Russia ???

Dear all,
I tried to phone several days without succes a fixed tel.number in Moscow (+7-495 area);
it is not a mobile number, but normal fixed telephone number.
The phone number can be reached normally with an mobile phone, but not with Skype ???
I have a unlimited Europe and now also an unlimited Russia subscription, it has worked before (normally 60 days ago, with problems the last weeks, not possible the last days.??)
Could anyone give me a hint or advice what can solve this problem? This is a big problem for me.
Thank you very much for your help in advance !
Jan

The Reset Firefox feature can fix many issues by restoring Firefox to its factory default state while saving your essential information.
Note: ''This will cause you to lose any Extensions, Open websites, and some Preferences.''
To Reset Firefox do the following:
#Go to Firefox > Help > Troubleshooting Information.
#Click the "Reset Firefox" button.
#Firefox will close and reset. After Firefox is done, it will show a window with the information that is imported. Click Finish.
#Firefox will open with all factory defaults applied.
Further information can be found in the [[Reset Firefox – easily fix most problems]] article.
Did this fix your problems? Please report back to us!

UC560 - CUE can not reach internet

Hello all, new here, but not new to using Cisco equipment. I am however new to the phone side of Cisco.
I'm currently working on an issue with my CUE traffic not routing out to the internet, however I'm feeling rather stumped at the moment and was hoping to get some insight from the community.
As a bit of background - on my UC560 the CUE IP is not the default, I had to change it due to an IP conflict (that was a painful process). If I have a terminal open to the UC560, I can ping the CUE, and ping out to the internet. If I open the session to the CUE, I am able to ping the UC560, however unable to ping an internet IP (i.e. 8.8.8.8).
Here are the results of a sh ip route:
S*    0.0.0.0/0 [1/0] via 10.1.0.1
      10.0.0.0/8 is variably subnetted, 7 subnets, 3 masks
C        10.1.0.0/24 is directly connected, Vlan1
L        10.1.0.228/32 is directly connected, Vlan1
C        10.1.1.0/24 is directly connected, Vlan100
L        10.1.1.1/32 is directly connected, Vlan100
C        10.10.10.0/30 is directly connected, Vlan90
S        10.10.10.1/32 is directly connected, Vlan90
L        10.10.10.2/32 is directly connected, Vlan90
I will be happy to share more configuration items as requested. Any help would be greatly appreciated.
As an additional note, I would need the Vlan90 (CUE) traffic routed (Or maybe NAT'd) through the UC560, as I can not make any changes to the current router.
Thank you in advance!

The existing LAN is on the 10.1.0.0 Network. When I session into the CUE, I can ping 10.1.0.228 (The LAN IP of the UC560), but I can not ping 10.1.0.1 (LAN Router - which I can not adjust routes) or any other LAN hosts.
Is there a way I can setup a route for the 10.10.10.0 through the LAN interface (10.1.0.228) of the UC560? Or a way to NAT the 10.10.10.0 traffic behind that interface?

Apple TV can see library, but can not reach content after adding Roksbox on a Roku in another room.

I have my iTunes library on a power mag g5 running leopard. I have an Apple TV I have been using to access the content. I have since added an older Roku in a different room. I installed an app called Rokbox on the Roku that is able to stream content over the network. I had to start the web server and create soft links to the music and movie directories where the iTunes content resides. Now the Apple TV can see the library on the network but can not see the content. Please help.

Hi All,
Same issue here. Just upgraded (?) from the previous version of Apple TV, to the new Apple TV2. Like others here, my main problems seem to be with unreliable streaming from iTunes 10 on my PowerMac (Quad G5, Leopard OSX).
My original AppleTV had no issues w/the wireless network, or synching w/my PowerMac.
The network connection from the ATV2 are fine, and have no issues accessing the Apple Store (for movies, TV shows), or accessing Netflix. The access to the internet from my ATV2 is quite robust.
My problems are with keeping a constant, reliable wireless connection to my PowerMac, via an Airport Extreme wireless router.
I have tried multiple restarts, reboots, reset ATV2 to original settings, tried different wireless channels on the Airport Extreme, verified I have Home Sharing properly enabled in iTunes,etc, but no luck so far.
What I'm seeing is when I access my iTunes on my computer, I can see my library, and then if I start to "shuffle songs" I may get 1 to 3 songs to play fine, but then the music stops, and I can no longer access the music/movies/etc in iTunes any longer. When I then go to my PowerMac, it has lost most bars of signal strength on the wireless network (although all other devices show strong signal strength), and I have to Turn AirPort Off, then Turn AirPort On and I then am reconnected to the wireless network with good signal.
I then go back to the ATV2, connect to my iTunes, start my music, and then 1-2 songs later it again stops playing, and I go through this all over again.
It seems as though there is something on the wireless network between the ATV2 and my PowerMac that causes it to lose connection, and I have to manually start again. The problem is that the connection is not robust, and only lasts a few minutes.
Hope this gets solved soon.
Regards
Tom

VLAN 2 can not reach the internet.

I have two VLANs 2 and 3, VLAN 3 is my user network and VLAN 2 is my server network. The two VLANs can talk, but VLAN 2 can not get out to the internet. What am I doing wrong?
Building configuration...
Current configuration : 2735 bytes
! Last configuration change at 02:42:02 UTC Thu Mar 4 1993
version 15.0
service config
no service pad
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
hostname oacSwitch1
boot-start-marker
boot-end-marker
enable secret 4 *************
enable password *************
no aaa new-model
system mtu routing 1500
ip routing
spanning-tree mode pvst
spanning-tree extend system-id
vlan internal allocation policy ascending
interface FastEthernet0
no ip address
no ip route-cache
interface GigabitEthernet0/1
switchport access vlan 3
spanning-tree portfast
interface GigabitEthernet0/2
switchport access vlan 3
spanning-tree portfast
interface GigabitEthernet0/3
switchport access vlan 3
spanning-tree portfast
interface GigabitEthernet0/4
switchport access vlan 3
spanning-tree portfast
interface GigabitEthernet0/5
switchport access vlan 3
spanning-tree portfast
interface GigabitEthernet0/6
switchport access vlan 3
spanning-tree portfast
interface GigabitEthernet0/7
switchport access vlan 2
switchport mode access
spanning-tree portfast
interface GigabitEthernet0/8
switchport access vlan 2
switchport mode access
spanning-tree portfast
interface GigabitEthernet0/9
switchport access vlan 3
spanning-tree portfast
interface GigabitEthernet0/10
switchport access vlan 3
spanning-tree portfast
interface GigabitEthernet0/11
switchport access vlan 3
spanning-tree portfast
interface GigabitEthernet0/12
switchport access vlan 3
spanning-tree portfast
interface GigabitEthernet0/13
switchport access vlan 3
spanning-tree portfast
interface GigabitEthernet0/14
switchport access vlan 3
spanning-tree portfast
interface GigabitEthernet0/15
switchport access vlan 3
spanning-tree portfast
interface GigabitEthernet0/16
switchport access vlan 3
spanning-tree portfast
interface GigabitEthernet0/17
switchport access vlan 3
interface GigabitEthernet0/18
switchport access vlan 3
interface GigabitEthernet0/19
switchport access vlan 3
interface GigabitEthernet0/20
switchport access vlan 3
interface GigabitEthernet0/21
switchport access vlan 2
interface GigabitEthernet0/22
switchport access vlan 3
interface GigabitEthernet0/23
switchport access vlan 3
interface GigabitEthernet0/24
switchport access vlan 3
interface Vlan1
no ip address
shutdown
interface Vlan2
ip address 10.0.0.1 255.255.0.0
interface Vlan3
ip address 192.168.0.2 255.255.255.0
ip http server
ip route 0.0.0.0 0.0.0.0 192.168.0.1
line con 0
line vty 0 4
password *************
login
line vty 5 15
password *************
login
end

What Alain is saying is that you have two subnets listed in your switch. The comcast modem may support static routes, but it may only support natting it's primary IP address that's configured on its lan. For example, from your config I assume that vlan 3 is the vlan that the comcast modem is configured as. If you were to change the lan side ip address on the modem to vlan 2, your vlan 2 would be able to get out, but vlan 3 would not. The only way that I can see getting around this is to get a router, or ASA, and put it between your comcast modem and switch. Have the public address passed to the router/ASA and then you can do your natting on that device.
HTH,
John
*** Please rate all useful posts ***

Can not access sample & admin tools after configuring Oracle8.1.7

Hi all,
I am using WLS6.1(sp2) and WLPortal4.0(sp1).
I changed the default database(i.e. Cloudscape) to Oracle by following the doc
http://edocs.bea.com/wlp/docs40/deploygd/oraclnew.htm
But, after setting up the Oracle8.1.7, when i try to access the sample stock portal
from the homepage, i am getting the following exception
PortalPersistenceManager: portal 'portal/stockportal' not found
<Feb 20, 2002 12:33:19 PM EST> <Error> <HTTP> <[WebAppServletContext(1467076,stockportal,/stockportal)]
Servlet failed with S
ervletException
javax.servlet.ServletException: Received a null Portal object from the PortalManager.
at com.bea.portal.appflow.servlets.internal.PortalWebflowServlet.setupPortalRequest(PortalWebflowServlet.java:194)
at com.bea.portal.appflow.servlets.internal.PortalWebflowServlet.doGet(PortalWebflowServlet.java:99)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:265)
at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:200)
at weblogic.servlet.internal.RequestDispatcherImpl.forward(RequestDispatcherImpl.java:241)
at weblogic.servlet.jsp.PageContextImpl.forward(PageContextImpl.java:112)
at jsp_servlet.__index._jspService(__index.java:92)
at weblogic.servlet.jsp.JspBase.service(JspBase.java:27)
at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:265)
at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:200)
at weblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppServletContext.java:2495)
at weblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestImpl.java:2204)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:139)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
even i can not access the admin tools.....i get the follwing error when i try
to access the portalTools/index.jsp
<Feb 20, 2002 12:38:18 PM EST> <Warning> <Webflow> <Webflow could not resolve
a destination given: appname [tools], namespace
[admin_main], origin [begin], event [defaultEvent] with request id [3121877];
Attempting to load Configuration-error-page.>
<Feb 20, 2002 12:38:18 PM EST> <Error> <Webflow> <Error while parsing uri /portalTools/application,
path null, query string n
amespace=admin_main - Webflow XML does not exist, is not loaded properly, or you
do not have a configuration-error-page defin
ed.
Exception[com.bea.p13n.appflow.exception.ConfigurationException: The configuration-error-page
node was not found in the webfl
ow xml file. for webapp [tools], namespace [admin_main]. While trying to display
CONFIGURATION ERROR: [Exception[com.bea.p13n
.appflow.exception.ConfigurationException: Bad Namespace - namespace [admin_main]
is not available for webflow execution. Mak
e sure the [admin_main.wf] file is deployed in webapp [tools].]],]
at com.bea.p13n.appflow.webflow.internal.WebflowExecutorImpl.processConfigurationError(WebflowExecutorImpl.java:786)
at com.bea.p13n.appflow.webflow.internal.WebflowExecutorImpl.processWebflowRequest(WebflowExecutorImpl.java:484)
at com.bea.p13n.appflow.webflow.internal.WebflowExecutorImpl.processWebflowRequest(WebflowExecutorImpl.java:419)
at com.bea.p13n.appflow.webflow.servlets.internal.WebflowServlet.doGet(WebflowServlet.java:132)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:265)
at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:200)
at weblogic.servlet.internal.RequestDispatcherImpl.forward(RequestDispatcherImpl.java:241)
at weblogic.servlet.jsp.PageContextImpl.forward(PageContextImpl.java:112)
at jsp_servlet.__index._jspService(__index.java:92)
at weblogic.servlet.jsp.JspBase.service(JspBase.java:27)
at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:265)
at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:200)
at weblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppServletContext.java:2495)
at weblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestImpl.java:2204)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:139)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
>
Am i missing any step here???
can anybody help me????
thanks
Vijay

oops...i missed step5.
it is working now after doing the sync.
thanks
Vijay
"Daniel Selman" <[email protected]> wrote:
Did you sync the applications and load the sample data?
Sincerely,
Daniel Selman
"vijay bujula" <[email protected]> wrote in message
news:[email protected]...
Hi all,
I am using WLS6.1(sp2) and WLPortal4.0(sp1).
I changed the default database(i.e. Cloudscape) to Oracle by followingthe
doc
http://edocs.bea.com/wlp/docs40/deploygd/oraclnew.htm
But, after setting up the Oracle8.1.7, when i try to access the samplestock portal
from the homepage, i am getting the following exception
PortalPersistenceManager: portal 'portal/stockportal' not found
<Feb 20, 2002 12:33:19 PM EST> <Error> <HTTP><[WebAppServletContext(1467076,stockportal,/stockportal)]
Servlet failed with S
ervletException
javax.servlet.ServletException: Received a null Portal object fromthe
PortalManager.
atcom.bea.portal.appflow.servlets.internal.PortalWebflowServlet.setupPortalReq
uest(PortalWebflowServlet.java:194)
atcom.bea.portal.appflow.servlets.internal.PortalWebflowServlet.doGet(PortalWe
bflowServlet.java:99)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
atweblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java
:265)
atweblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java
:200)
atweblogic.servlet.internal.RequestDispatcherImpl.forward(RequestDispatcherImp
l.java:241)
atweblogic.servlet.jsp.PageContextImpl.forward(PageContextImpl.java:112)
at jsp_servlet.__index._jspService(__index.java:92)
at weblogic.servlet.jsp.JspBase.service(JspBase.java:27)
atweblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java
:265)
atweblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java
:200)
atweblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppServletCo
ntext.java:2495)
atweblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestImpl.java
:2204)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:139)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
even i can not access the admin tools.....i get the follwing errorwhen i
try
to access the portalTools/index.jsp
<Feb 20, 2002 12:38:18 PM EST> <Warning> <Webflow> <Webflow could notresolve
a destination given: appname [tools], namespace
[admin_main], origin [begin], event [defaultEvent] with request id[3121877];
Attempting to load Configuration-error-page.>
<Feb 20, 2002 12:38:18 PM EST> <Error> <Webflow> <Error while parsinguri
/portalTools/application,
path null, query string n
amespace=admin_main - Webflow XML does not exist, is not loaded properly,or you
do not have a configuration-error-page defin
ed.
Exception[com.bea.p13n.appflow.exception.ConfigurationException: The
configuration-error-page>> node was not found in the webfl>> ow xml file. for webapp [tools, namespace [admin_main]. While tryingto
display
CONFIGURATION ERROR: [Exception[com.bea.p13n
appflow.exception.ConfigurationException: Bad Namespace - namespace[admin_main]
is not available for webflow execution. Mak
e sure the [admin_main.wf] file is deployed in webapp [tools].]],]
atcom.bea.p13n.appflow.webflow.internal.WebflowExecutorImpl.processConfigurati
onError(WebflowExecutorImpl.java:786)
atcom.bea.p13n.appflow.webflow.internal.WebflowExecutorImpl.processWebflowRequ
est(WebflowExecutorImpl.java:484)
atcom.bea.p13n.appflow.webflow.internal.WebflowExecutorImpl.processWebflowRequ
est(WebflowExecutorImpl.java:419)
atcom.bea.p13n.appflow.webflow.servlets.internal.WebflowServlet.doGet(WebflowS
ervlet.java:132)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
atweblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java
:265)
atweblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java
:200)
atweblogic.servlet.internal.RequestDispatcherImpl.forward(RequestDispatcherImp
l.java:241)
atweblogic.servlet.jsp.PageContextImpl.forward(PageContextImpl.java:112)
at jsp_servlet.__index._jspService(__index.java:92)
at weblogic.servlet.jsp.JspBase.service(JspBase.java:27)
atweblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java
:265)
atweblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java
:200)
atweblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppServletCo
ntext.java:2495)
atweblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestImpl.java
:2204)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:139)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
>
Am i missing any step here???
can anybody help me????
thanks
Vijay

Document types Doc status RU can not reach OB or FR - IMG configuration

Similar Messages

Maybe you are looking for