Document types - wildcard support?
My understanding of iFS is that I can define an XML document type, and after that any documents of that type would be automatically parsed for me. In another message there was a note that currently wildcards aren't supported. I'm not clear on this. How about this example: I have an XML document 'order.xml', that I 'define' into iFS. Subsequently any documents called order.xml will be parsed - right?
ok, but what wouldn't work is sending documents called order100.xml, order101.xml... because I'd have to define the format for each one? Right?
Thanks! I can't get the *()& thing to work, so I'm going at this by just reading.
Wildcards don't work in the Parser mapping tables. Eg you cannot map x* to a particular parser.
Similar Messages
-
Which document types are supported?
Hi!
I'm trying to answer an RFI and need to specify a list of supported document types that can be indexed. The answer "more than 150 file formats..." is not good enough. There must be a list somewhere...
Regards MikaelCheck the Text reference manual for the complete list: http://tahiti.oracle.com/pls/db901/db901.docindex#index-TEX
-
Which are the document types supported by Portal's Search
I'd like to know which are the document types supported by Oracle Ultrasearch / Oracle Portal that looks for the information inside the document.
Thank you very much,
RegardsThe document types supported are the same as those supported by Oracle Text.
It depends on the database version as to what document types are supported. Therefore if you check your database information, Text Reference, there is a Supported Document Formats section which should give you the information you need. -
Hi Gurus
I have created a document by using a existing document type and trying to print this document in the production order, but somehow its not printing, whereas if i use the other document type for Excel then i uploaded then i attached excel instead of PDF then this excel printing on the production order.
I believe there is something wrong with the existing PDF document type i have been using. Please suggest me the configuration required to print the PDF file in the production order.
This is very generic process nothing complex involved to print the PDF.
Please suggest.
Thanks,
Quantum.Hi
I could not find define workstation application in network in SPRO, but there is only define work station application. Would you give me in detail the exact thing you refering to.
Here i am not using DMS module, but wanted to Manage a document system for the production order by creating or assigning a document.
SO currently i have created a Document in CV01n and assigned to Material master object, which is very simple process. But i cannot print a PDF file out of the document type i am using now. Current Document type is supported to PDF.
But I can print excel file with the other document type.
Please suggest what exactly the changes required in the document type, Or give me a details how to create a Document type with PDF file.
Thanks,
Quantum. -
Dear All,
The COPA postings for document types ZRE, ZRE1, ZUSI (returns) and ZCDI (Dimp credits) should be to the Returns@List value field instead of Sales@List value field. These changes are already in place in user-exit EXIT_SAPLKEAB_001 (include ZXKKEU03).
There are two new document types created to reverse the ZRE, ZRE1 and ZCDI returns and credits. The logic in this user-exit needs to be extened to these document types. The new document type ZRED which is used to reverse the ZRE and ZRE1 credit will follow the same logic as ZRE/ZRE1 documents. The logic for ZCDD which is used to reverse the ZCDI credits will follow the same logic as ZCDI credits.
Will you please let me know how to add code to this exit?
Thanks in Advance,
RamanaThe document types supported are the same as those supported by Oracle Text.
It depends on the database version as to what document types are supported. Therefore if you check your database information, Text Reference, there is a Supported Document Formats section which should give you the information you need. -
Document types to upload into SM
Hello,
please do you know which are the file types supported by Solution manager?
Thanks in advnaceHi Esther,
The below document types are supported in Solution Manager.
(1) Word documents
(2) Excel files
(3) Presentation files(PPTs)
(4) Text files
(5) Image files (jpgs)
(6) iTutor documents
I have uploaded and viewed the above document types from Solution Manager.
Apart from that if you just mean uploading and downloading(without the requirement for opening it from SolMan itself) of files, anything can be uploaded to SolMan and can be downloaded to your desktop from SolMan from where you can open it using appropriate applications.
best regds,
Alagammai. -
Copying from sales document type QTH to HU is not supported
guys i was trying to create a contract based on a quotation created by me here QTH is my quotation type and HU is my contract type the error i encountered was thiss.
Copying from sales document type QTH to HU is not supported .Hi
In VTAA maintain the copy control settings from Quotation to Contract
I think you can copy the AV document type which is quotation for contract.
regards -
Not able to add Select Supported Document Types
Hi
I am new to Oracle B2B.
Going through the steps given in the tutorial http://download.oracle.com/docs/cd/E14571_01/integration.1111/e10229/b2b_tps.htm#BABGAJDE
Completed till 5.3 - Task 2 (Add a User in the Oracle B2B Interface)
And the Next thing,
I am not able to Add Select Supported Document Types.When I click on the "Add supported document type for the selected user", i can see "CUSTOM", "EDI_EDIFACT" etc... but in that screen my "Add" Button was disabled.
Please let me know how to proceed with this.
Thanks,
Deepthi.
Edited by: 796969 on 27/09/2010 14:11Hi Deepthi,
You can download the samples from below location. Samples also has document for step by step configuraion:
B2B Samples are part of SOA samples:
http://www.oracle.com/technology/sample_code/products/soa/index.html
Developer Notes / Step by Step configuration guide:
http://www.oracle.com/technology/products/soa/b2b/index.html
http://www.oracle.com/technology/products/soa/b2b/collateral/B2B_TU001_EDI.pdf
http://www.oracle.com/technology/products/soa/b2b/collateral/B2B_TU002_HL7.pdf
http://www.oracle.com/technology/products/soa/b2b/collateral/B2B_TU003_ebxml.pdf
http://blogs.oracle.com/oracleb2bgurus/2010/04/oracle_b2b_started_kit.html
Please let us know which usecase you are trying for more details.
Rgds,
Nitesh Jain
[email protected] -
Copying from sales document type L2 to RK is not supported
Dear Experts,
Can any guide me please regarding my issue,
My process is linked with service order,after creation of service order,I am going to DP90 Tcode with this it will generate debit memo request,and I will do the billing from vf01.
Now I want to make some invoice correction,
so I have copied the standard RK invoice correction document to ZRK
and i have assign this for my sales area in sales document header,
now I have raised the order from va01,and I have given the invoice document number,
its showing this error u201CCOPYING FROM SALES DOCUMENT TYPE L2 TO ZRK IS NOT SUPPORTEDu201D
for this I think I have to maintain the copy controls,
can any one help me out how to maintain the copy controls for invoice correction.Dear JP,
As you said I have maintained the item category,I have only two item categories,one is L2N,L2W.
I have copied the standard document from VTAF,and I have maintained the copy controls like this,
Copied from RK to F2 as ZRK to ZL2 header data
Data T 052 billing doc header
Data T 103 billing bus header data
Data T 003 billing header partner
Copying requirements as 021 billing header
Tick on copy item number
Then item category maintained as
Item category as L2N
Data T 153 Item from billing document
Data T 104 billing bus item data
Data T 004 billing item partner
Copying requirements as 000
Pricing type u201CEu201D
2nd pricing type u201CDu201D
And the same for L2W,but I have not maintained for u201CG2Nu201Ditem category,but I has copied automatically?
Then I have raised the sales order from va01,its ask the billing document number,I have given the billing doc number and press on copy,its has open the sales order,
Here I have two issues,
1st its generating the two same line items,with G2N item category
EG:if I have given 2 materials line items then its generating the 4 line items with the same material.
2nd I am not able edit any line litem,it all are coming in non editable mode,how to make editable field,and make the changes for price and quantity.
After saving the document again I have to do the billing from vf01?
please suggest me,so this will be added advantage to the user. -
Wrong document type is processed form ME59N - Automatic PO creation Efected
Dear Friends,
Im facing one issue while the PO is created from Purchase requistion(ME59N).
If the purchase requisition document type is - XTB while creation of PO from ME59N the document type is taking as UB
the SPRO setting has been done for supplying plant and receving pant as - XTB but still getting the error as
Doc. type XTBshould be used for suppl. plant XXXX and receiving plant XXXX. 06 - 674 ( Msg class and No)
Could any one please help me on this.
The manual PO creation(ME21N) is perfect .
Regards
Kumar.Hi Mauro,
Thank you for the very helpful answer, i suggested my team to impliment the OSS note.
Thanks for your help.
One similar kind of issue i am facing, i implimented one enhancement in the BADI "ME_PROCESS_PO_CUST" for checking the supplying plant.
When i processd it through ME21N ( manulaly) it's taking the right plant, But when i processed it through ME59 ( Autoamtion of PO) the Enhancement is not triggered.
ME59N is not supporting as there is no support pack ( OSS notes need to be implimented).
Coluld you please provide any helpful answer for me
Thanks for your support and Help.
Regards
Ravi. -
Epson SX218 doesn't print (client-error-document-format-not-supported)
Hi there,
I'm currently trying to figure out how to get my Epson Stylus SX 218 to work. Unfortunately, cups (or the printer or whatever causes my problems...) obviously just doesn't want me to get this to work.
Here's what I've done so far:
I installed everything as described in the CUPS wiki article (so ghostscript and all the foomatic-stuff is installed, usblp is NOT blacklisted, see why below)
I installed epson-inkjet-printer-workforce-sx218 from AUR
I started cups...
Nothing worked (Printer not recognized, either with or without blacklisted usblp module...)
I searched the forums for a solution
I installed cups-usblp and reinstalled all the cups stuff
Printer got recognized! Yay!
So, now the printer is set up in cups using the avasys driver. But...
It doesn't print!
When I try to print a test page via the cups webinterface it keeps telling me
Unsupported format "application/vnd.cups-banner".
The following packages are installed now:
$ pacman -Qs cups
local/cups-usblp 1.5.0-1
local/libcups 1.5.0-1
$ pacman -Qs foomatic
local/foomatic-db 1:4.0.7_20110707-1
local/foomatic-db-engine 1:4.0.7_20110707-1
local/foomatic-db-nonfree 1:4.0.7_20110707-1
local/foomatic-filters 1:4.0.7_20110707-1
$ pacman -Qs epson
local/epson-inkjet-printer-workforce-320-sx218 1.0.0-6
$ pacman -Qs ghostscript
local/ghostscript 9.04-5
Here's my cups error log:
I [01/Jan/2012:18:59:01 +0100] Listening to [v1.::1]:631 (IPv6)
I [01/Jan/2012:18:59:01 +0100] Listening to 127.0.0.1:631 (IPv4)
I [01/Jan/2012:18:59:01 +0100] Listening to /var/run/cups/cups.sock (Domain)
I [01/Jan/2012:18:59:01 +0100] Remote access is disabled.
D [01/Jan/2012:18:59:01 +0100] Added auto ServerAlias mamapc
I [01/Jan/2012:18:59:01 +0100] Loaded configuration file "/etc/cups/cupsd.conf"
I [01/Jan/2012:18:59:01 +0100] Using default TempDir of /var/spool/cups/tmp...
I [01/Jan/2012:18:59:01 +0100] Configured for up to 100 clients.
I [01/Jan/2012:18:59:01 +0100] Allowing up to 100 client connections per host.
I [01/Jan/2012:18:59:01 +0100] Using policy "default" as the default.
D [01/Jan/2012:18:59:01 +0100] cupsdMarkDirty(---p--)
D [01/Jan/2012:18:59:01 +0100] cupsdSetBusyState: newbusy="Dirty files", busy="Not busy"
I [01/Jan/2012:18:59:01 +0100] Partial reload complete.
I [01/Jan/2012:18:59:01 +0100] Listening to [v1.::1]:631 on fd 6...
I [01/Jan/2012:18:59:01 +0100] Listening to 127.0.0.1:631 on fd 8...
I [01/Jan/2012:18:59:01 +0100] Listening to /var/run/cups/cups.sock:631 on fd 9...
I [01/Jan/2012:18:59:01 +0100] Resuming new connection processing...
D [01/Jan/2012:18:59:01 +0100] cupsdSetBusyState: newbusy="Dirty files", busy="Dirty files"
D [01/Jan/2012:18:59:01 +0100] Discarding unused server-restarted event...
D [01/Jan/2012:18:59:01 +0100] cupsdAcceptClient: 13 from localhost:631 (IPv4)
D [01/Jan/2012:18:59:01 +0100] Report: clients=1
D [01/Jan/2012:18:59:01 +0100] Report: jobs=0
D [01/Jan/2012:18:59:01 +0100] Report: jobs-active=0
D [01/Jan/2012:18:59:01 +0100] Report: printers=0
D [01/Jan/2012:18:59:01 +0100] Report: printers-implicit=0
D [01/Jan/2012:18:59:01 +0100] Report: stringpool-string-count=407
D [01/Jan/2012:18:59:01 +0100] Report: stringpool-alloc-bytes=4648
D [01/Jan/2012:18:59:01 +0100] Report: stringpool-total-bytes=5736
D [01/Jan/2012:18:59:01 +0100] PID 928 (/usr/lib/cups/cgi-bin/admin.cgi) exited with no errors.
D [01/Jan/2012:18:59:01 +0100] cupsdReadClient: 13 GET /images/wait.gif HTTP/1.1
D [01/Jan/2012:18:59:01 +0100] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Dirty files"
D [01/Jan/2012:18:59:01 +0100] cupsdAuthorize: Authorized as root using Basic
D [01/Jan/2012:18:59:01 +0100] cupsdSetBusyState: newbusy="Dirty files", busy="Active clients and dirty files"
D [01/Jan/2012:18:59:06 +0100] cupsdReadClient: 13 GET /admin/?OP=redirect HTTP/1.1
D [01/Jan/2012:18:59:06 +0100] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Dirty files"
D [01/Jan/2012:18:59:06 +0100] cupsdAuthorize: Authorized as root using Basic
D [01/Jan/2012:18:59:06 +0100] [CGI] argv[0] = "/usr/lib/cups/cgi-bin/admin.cgi"
D [01/Jan/2012:18:59:06 +0100] [CGI] argv[1] = "OP=redirect"
D [01/Jan/2012:18:59:06 +0100] [CGI] envp[0] = "CUPS_CACHEDIR=/var/cache/cups"
D [01/Jan/2012:18:59:06 +0100] [CGI] envp[1] = "CUPS_DATADIR=/usr/share/cups"
D [01/Jan/2012:18:59:06 +0100] [CGI] envp[2] = "CUPS_DOCROOT=/usr/share/cups/doc"
D [01/Jan/2012:18:59:06 +0100] [CGI] envp[3] = "CUPS_FONTPATH=/usr/share/cups/fonts"
D [01/Jan/2012:18:59:06 +0100] [CGI] envp[4] = "CUPS_REQUESTROOT=/var/spool/cups"
D [01/Jan/2012:18:59:06 +0100] [CGI] envp[5] = "CUPS_SERVERBIN=/usr/lib/cups"
D [01/Jan/2012:18:59:06 +0100] [CGI] envp[6] = "CUPS_SERVERROOT=/etc/cups"
D [01/Jan/2012:18:59:06 +0100] [CGI] envp[7] = "CUPS_STATEDIR=/var/run/cups"
D [01/Jan/2012:18:59:06 +0100] [CGI] envp[8] = "HOME=/var/spool/cups/tmp"
D [01/Jan/2012:18:59:06 +0100] [CGI] envp[9] = "PATH=/usr/lib/cups/filter:/usr/bin:/usr/sbin:/bin:/usr/bin"
D [01/Jan/2012:18:59:06 +0100] [CGI] envp[10] = "SERVER_ADMIN=root@mamapc"
D [01/Jan/2012:18:59:06 +0100] [CGI] envp[11] = "SOFTWARE=CUPS/1.5.0"
D [01/Jan/2012:18:59:06 +0100] [CGI] envp[12] = "TMPDIR=/var/spool/cups/tmp"
D [01/Jan/2012:18:59:06 +0100] [CGI] envp[13] = "USER=root"
D [01/Jan/2012:18:59:06 +0100] [CGI] envp[14] = "CUPS_SERVER=/var/run/cups/cups.sock"
D [01/Jan/2012:18:59:06 +0100] [CGI] envp[15] = "CUPS_ENCRYPTION=IfRequested"
D [01/Jan/2012:18:59:06 +0100] [CGI] envp[16] = "IPP_PORT=631"
D [01/Jan/2012:18:59:06 +0100] [CGI] envp[17] = "AUTH_TYPE=Basic"
D [01/Jan/2012:18:59:06 +0100] [CGI] envp[18] = "LANG=de_DE.UTF8"
D [01/Jan/2012:18:59:06 +0100] [CGI] envp[19] = "REDIRECT_STATUS=1"
D [01/Jan/2012:18:59:06 +0100] [CGI] envp[20] = "GATEWAY_INTERFACE=CGI/1.1"
D [01/Jan/2012:18:59:06 +0100] [CGI] envp[21] = "SERVER_NAME=localhost"
D [01/Jan/2012:18:59:06 +0100] [CGI] envp[22] = "SERVER_PORT=631"
D [01/Jan/2012:18:59:06 +0100] [CGI] envp[23] = "REMOTE_ADDR=127.0.0.1"
D [01/Jan/2012:18:59:06 +0100] [CGI] envp[24] = "REMOTE_HOST=localhost"
D [01/Jan/2012:18:59:06 +0100] [CGI] envp[25] = "SCRIPT_NAME=/admin/"
D [01/Jan/2012:18:59:06 +0100] [CGI] envp[26] = "SCRIPT_FILENAME=/usr/share/cups/doc/admin/"
D [01/Jan/2012:18:59:06 +0100] [CGI] envp[27] = "REMOTE_USER=root"
D [01/Jan/2012:18:59:06 +0100] [CGI] envp[28] = "SERVER_PROTOCOL=HTTP/1.1"
D [01/Jan/2012:18:59:06 +0100] [CGI] envp[29] = "HTTP_COOKIE=org.cups.sid=960956618ce3e170434dd2afacd4fad3"
D [01/Jan/2012:18:59:06 +0100] [CGI] envp[30] = "HTTP_USER_AGENT=Opera/9.80 (X11; Linux i686; U; de) Presto/2.10.229 Version/11.60"
D [01/Jan/2012:18:59:06 +0100] [CGI] envp[31] = "HTTP_REFERER=http://localhost:631/admin"
D [01/Jan/2012:18:59:06 +0100] [CGI] envp[32] = "REQUEST_METHOD=GET"
D [01/Jan/2012:18:59:06 +0100] [CGI] envp[33] = "QUERY_STRING=OP=redirect"
D [01/Jan/2012:18:59:06 +0100] [CGI] Started /usr/lib/cups/cgi-bin/admin.cgi (PID 929)
I [01/Jan/2012:18:59:06 +0100] Started "/usr/lib/cups/cgi-bin/admin.cgi" (pid=929)
D [01/Jan/2012:18:59:06 +0100] cupsdSendCommand: 13 file=14
D [01/Jan/2012:18:59:06 +0100] [CGI] admin.cgi started...
D [01/Jan/2012:18:59:06 +0100] cupsdAcceptClient: 16 from localhost (Domain)
D [01/Jan/2012:18:59:06 +0100] [CGI] http=0xb9359360
D [01/Jan/2012:18:59:06 +0100] [CGI] org.cups.sid cookie is "960956618ce3e170434dd2afacd4fad3"
D [01/Jan/2012:18:59:06 +0100] [CGI] redirecting with prefix http://localhost:631!
D [01/Jan/2012:18:59:06 +0100] cupsdReadClient: 16 WAITING Closing on EOF
D [01/Jan/2012:18:59:06 +0100] cupsdCloseClient: 16
D [01/Jan/2012:18:59:06 +0100] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
D [01/Jan/2012:18:59:06 +0100] Script header: Location: http://localhost:631/admin
D [01/Jan/2012:18:59:06 +0100] Script header:
D [01/Jan/2012:18:59:06 +0100] cupsdAcceptClient: 16 from localhost:631 (IPv4)
D [01/Jan/2012:18:59:06 +0100] cupsdReadClient: 16 GET /admin HTTP/1.1
D [01/Jan/2012:18:59:06 +0100] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
D [01/Jan/2012:18:59:06 +0100] cupsdAuthorize: Authorized as root using Basic
D [01/Jan/2012:18:59:06 +0100] [CGI] argv[0] = "/usr/lib/cups/cgi-bin/admin.cgi"
D [01/Jan/2012:18:59:06 +0100] [CGI] envp[0] = "CUPS_CACHEDIR=/var/cache/cups"
D [01/Jan/2012:18:59:06 +0100] [CGI] envp[1] = "CUPS_DATADIR=/usr/share/cups"
D [01/Jan/2012:18:59:06 +0100] [CGI] envp[2] = "CUPS_DOCROOT=/usr/share/cups/doc"
D [01/Jan/2012:18:59:06 +0100] [CGI] envp[3] = "CUPS_FONTPATH=/usr/share/cups/fonts"
D [01/Jan/2012:18:59:06 +0100] [CGI] envp[4] = "CUPS_REQUESTROOT=/var/spool/cups"
D [01/Jan/2012:18:59:06 +0100] [CGI] envp[5] = "CUPS_SERVERBIN=/usr/lib/cups"
D [01/Jan/2012:18:59:06 +0100] [CGI] envp[6] = "CUPS_SERVERROOT=/etc/cups"
D [01/Jan/2012:18:59:06 +0100] [CGI] envp[7] = "CUPS_STATEDIR=/var/run/cups"
D [01/Jan/2012:18:59:06 +0100] [CGI] envp[8] = "HOME=/var/spool/cups/tmp"
D [01/Jan/2012:18:59:06 +0100] [CGI] envp[9] = "PATH=/usr/lib/cups/filter:/usr/bin:/usr/sbin:/bin:/usr/bin"
D [01/Jan/2012:18:59:06 +0100] [CGI] envp[10] = "SERVER_ADMIN=root@mamapc"
D [01/Jan/2012:18:59:06 +0100] [CGI] envp[11] = "SOFTWARE=CUPS/1.5.0"
D [01/Jan/2012:18:59:06 +0100] [CGI] envp[12] = "TMPDIR=/var/spool/cups/tmp"
D [01/Jan/2012:18:59:06 +0100] [CGI] envp[13] = "USER=root"
D [01/Jan/2012:18:59:06 +0100] [CGI] envp[14] = "CUPS_SERVER=/var/run/cups/cups.sock"
D [01/Jan/2012:18:59:06 +0100] [CGI] envp[15] = "CUPS_ENCRYPTION=IfRequested"
D [01/Jan/2012:18:59:06 +0100] [CGI] envp[16] = "IPP_PORT=631"
D [01/Jan/2012:18:59:06 +0100] [CGI] envp[17] = "AUTH_TYPE=Basic"
D [01/Jan/2012:18:59:06 +0100] [CGI] envp[18] = "LANG=de_DE.UTF8"
D [01/Jan/2012:18:59:06 +0100] [CGI] envp[19] = "REDIRECT_STATUS=1"
D [01/Jan/2012:18:59:06 +0100] [CGI] envp[20] = "GATEWAY_INTERFACE=CGI/1.1"
D [01/Jan/2012:18:59:06 +0100] [CGI] envp[21] = "SERVER_NAME=localhost"
D [01/Jan/2012:18:59:06 +0100] [CGI] envp[22] = "SERVER_PORT=631"
D [01/Jan/2012:18:59:06 +0100] [CGI] envp[23] = "REMOTE_ADDR=127.0.0.1"
D [01/Jan/2012:18:59:06 +0100] [CGI] envp[24] = "REMOTE_HOST=localhost"
D [01/Jan/2012:18:59:06 +0100] [CGI] envp[25] = "SCRIPT_NAME=/admin"
D [01/Jan/2012:18:59:06 +0100] [CGI] envp[26] = "SCRIPT_FILENAME=/usr/share/cups/doc/admin"
D [01/Jan/2012:18:59:06 +0100] [CGI] envp[27] = "REMOTE_USER=root"
D [01/Jan/2012:18:59:06 +0100] [CGI] envp[28] = "SERVER_PROTOCOL=HTTP/1.1"
D [01/Jan/2012:18:59:06 +0100] [CGI] envp[29] = "HTTP_COOKIE=org.cups.sid=960956618ce3e170434dd2afacd4fad3"
D [01/Jan/2012:18:59:06 +0100] [CGI] envp[30] = "HTTP_USER_AGENT=Opera/9.80 (X11; Linux i686; U; de) Presto/2.10.229 Version/11.60"
D [01/Jan/2012:18:59:06 +0100] [CGI] envp[31] = "HTTP_REFERER=http://localhost:631/admin"
D [01/Jan/2012:18:59:06 +0100] [CGI] envp[32] = "REQUEST_METHOD=GET"
D [01/Jan/2012:18:59:06 +0100] [CGI] envp[33] = "QUERY_STRING="
D [01/Jan/2012:18:59:06 +0100] [CGI] Started /usr/lib/cups/cgi-bin/admin.cgi (PID 930)
I [01/Jan/2012:18:59:06 +0100] Started "/usr/lib/cups/cgi-bin/admin.cgi" (pid=930)
D [01/Jan/2012:18:59:06 +0100] cupsdSendCommand: 16 file=17
D [01/Jan/2012:18:59:06 +0100] PID 929 (/usr/lib/cups/cgi-bin/admin.cgi) exited with no errors.
D [01/Jan/2012:18:59:06 +0100] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
D [01/Jan/2012:18:59:06 +0100] [CGI] admin.cgi started...
D [01/Jan/2012:18:59:06 +0100] cupsdAcceptClient: 14 from localhost (Domain)
D [01/Jan/2012:18:59:06 +0100] [CGI] http=0xb866c360
D [01/Jan/2012:18:59:06 +0100] [CGI] org.cups.sid cookie is "960956618ce3e170434dd2afacd4fad3"
D [01/Jan/2012:18:59:06 +0100] [CGI] No form data, showing main menu...
D [01/Jan/2012:18:59:06 +0100] [CGI] /usr/share/cups/drivers/pscript5.dll: Datei oder Verzeichnis nicht gefunden
D [01/Jan/2012:18:59:06 +0100] cupsdReadClient: 14 POST / HTTP/1.1
D [01/Jan/2012:18:59:06 +0100] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
D [01/Jan/2012:18:59:06 +0100] cupsdAuthorize: No authentication data provided.
D [01/Jan/2012:18:59:06 +0100] cupsdReadClient: 14 1.1 Get-Subscriptions 1
D [01/Jan/2012:18:59:06 +0100] Get-Subscriptions ipp://localhost/
D [01/Jan/2012:18:59:06 +0100] Get-Subscriptions client-error-not-found: No subscriptions found.
D [01/Jan/2012:18:59:06 +0100] Returning IPP client-error-not-found for Get-Subscriptions (ipp://localhost/) from localhost
D [01/Jan/2012:18:59:06 +0100] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
D [01/Jan/2012:18:59:06 +0100] Script header: Content-Type: text/html;charset=utf-8
D [01/Jan/2012:18:59:06 +0100] Script header:
D [01/Jan/2012:18:59:06 +0100] cupsdReadClient: 14 WAITING Closing on EOF
D [01/Jan/2012:18:59:06 +0100] cupsdCloseClient: 14
D [01/Jan/2012:18:59:06 +0100] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
D [01/Jan/2012:18:59:06 +0100] PID 930 (/usr/lib/cups/cgi-bin/admin.cgi) exited with no errors.
D [01/Jan/2012:18:59:06 +0100] cupsdSetBusyState: newbusy="Dirty files", busy="Active clients and dirty files"
D [01/Jan/2012:18:59:11 +0100] cupsdReadClient: 13 GET / HTTP/1.1
D [01/Jan/2012:18:59:11 +0100] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Dirty files"
D [01/Jan/2012:18:59:11 +0100] cupsdAuthorize: Authorized as root using Basic
D [01/Jan/2012:18:59:11 +0100] cupsdSetBusyState: newbusy="Dirty files", busy="Active clients and dirty files"
D [01/Jan/2012:18:59:11 +0100] cupsdReadClient: 13 WAITING Closing on EOF
D [01/Jan/2012:18:59:11 +0100] cupsdCloseClient: 13
D [01/Jan/2012:18:59:11 +0100] cupsdSetBusyState: newbusy="Dirty files", busy="Dirty files"
D [01/Jan/2012:18:59:12 +0100] cupsdReadClient: 16 WAITING Closing on EOF
D [01/Jan/2012:18:59:12 +0100] cupsdCloseClient: 16
D [01/Jan/2012:18:59:12 +0100] cupsdSetBusyState: newbusy="Dirty files", busy="Dirty files"
D [01/Jan/2012:18:59:12 +0100] cupsdAcceptClient: 13 from localhost:631 (IPv4)
D [01/Jan/2012:18:59:12 +0100] cupsdReadClient: 13 GET /admin/log/access_log? HTTP/1.1
D [01/Jan/2012:18:59:12 +0100] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Dirty files"
D [01/Jan/2012:18:59:12 +0100] cupsdAuthorize: Authorized as root using Basic
D [01/Jan/2012:18:59:12 +0100] cupsdSetBusyState: newbusy="Dirty files", busy="Active clients and dirty files"
I [01/Jan/2012:18:59:32 +0100] Generating printcap /etc/printcap...
D [01/Jan/2012:18:59:32 +0100] cupsdSetBusyState: newbusy="Not busy", busy="Dirty files"
D [01/Jan/2012:18:59:35 +0100] cupsdAcceptClient: 14 from localhost (Domain)
D [01/Jan/2012:18:59:35 +0100] cupsdReadClient: 14 POST / HTTP/1.1
D [01/Jan/2012:18:59:35 +0100] cupsdSetBusyState: newbusy="Active clients", busy="Not busy"
D [01/Jan/2012:18:59:35 +0100] cupsdAuthorize: No authentication data provided.
D [01/Jan/2012:18:59:35 +0100] cupsdReadClient: 14 1.1 CUPS-Get-Devices 1
D [01/Jan/2012:18:59:35 +0100] CUPS-Get-Devices
D [01/Jan/2012:18:59:35 +0100] cupsdIsAuthorized: username=""
D [01/Jan/2012:18:59:35 +0100] Returning HTTP Unauthorized for CUPS-Get-Devices (no URI) from localhost
D [01/Jan/2012:18:59:35 +0100] cupsdSendHeader: 14 WWW-Authenticate: Basic realm="CUPS", trc="y"
D [01/Jan/2012:18:59:35 +0100] cupsdReadClient: 14 WAITING Closing on EOF
D [01/Jan/2012:18:59:35 +0100] cupsdCloseClient: 14
D [01/Jan/2012:18:59:35 +0100] cupsdSetBusyState: newbusy="Not busy", busy="Active clients"
D [01/Jan/2012:18:59:35 +0100] cupsdAcceptClient: 14 from localhost (Domain)
D [01/Jan/2012:18:59:35 +0100] cupsdAcceptClient: 16 from localhost (Domain)
D [01/Jan/2012:18:59:35 +0100] cupsdReadClient: 14 WAITING Closing on EOF
D [01/Jan/2012:18:59:35 +0100] cupsdCloseClient: 14
D [01/Jan/2012:18:59:35 +0100] cupsdSetBusyState: newbusy="Not busy", busy="Not busy"
D [01/Jan/2012:18:59:35 +0100] cupsdReadClient: 16 POST / HTTP/1.1
D [01/Jan/2012:18:59:35 +0100] cupsdSetBusyState: newbusy="Active clients", busy="Not busy"
D [01/Jan/2012:18:59:35 +0100] cupsdAuthorize: Authorized as root using PeerCred
D [01/Jan/2012:18:59:35 +0100] cupsdReadClient: 16 1.1 CUPS-Get-Devices 1
D [01/Jan/2012:18:59:35 +0100] CUPS-Get-Devices
D [01/Jan/2012:18:59:35 +0100] cupsdIsAuthorized: username="root"
D [01/Jan/2012:18:59:35 +0100] [CGI] argv[0] = "/usr/lib/cups/daemon/cups-deviced"
D [01/Jan/2012:18:59:35 +0100] [CGI] argv[1] = "1"
D [01/Jan/2012:18:59:35 +0100] [CGI] argv[2] = "0"
D [01/Jan/2012:18:59:35 +0100] [CGI] argv[3] = "2"
D [01/Jan/2012:18:59:35 +0100] [CGI] argv[4] = "2"
D [01/Jan/2012:18:59:35 +0100] [CGI] argv[5] = "requested-attributes=all exclude-schemes='beh','cups-pdf','bluetooth','dnssd','http','https','ipp','lpd','ncp','parallel','scsi','smb','snmp','socket'"
D [01/Jan/2012:18:59:35 +0100] [CGI] envp[0] = "CUPS_CACHEDIR=/var/cache/cups"
D [01/Jan/2012:18:59:35 +0100] [CGI] envp[1] = "CUPS_DATADIR=/usr/share/cups"
D [01/Jan/2012:18:59:35 +0100] [CGI] envp[2] = "CUPS_DOCROOT=/usr/share/cups/doc"
D [01/Jan/2012:18:59:35 +0100] [CGI] envp[3] = "CUPS_FONTPATH=/usr/share/cups/fonts"
D [01/Jan/2012:18:59:35 +0100] [CGI] envp[4] = "CUPS_REQUESTROOT=/var/spool/cups"
D [01/Jan/2012:18:59:35 +0100] [CGI] envp[5] = "CUPS_SERVERBIN=/usr/lib/cups"
D [01/Jan/2012:18:59:35 +0100] [CGI] envp[6] = "CUPS_SERVERROOT=/etc/cups"
D [01/Jan/2012:18:59:35 +0100] [CGI] envp[7] = "CUPS_STATEDIR=/var/run/cups"
D [01/Jan/2012:18:59:35 +0100] [CGI] envp[8] = "HOME=/var/spool/cups/tmp"
D [01/Jan/2012:18:59:35 +0100] [CGI] envp[9] = "PATH=/usr/lib/cups/filter:/usr/bin:/usr/sbin:/bin:/usr/bin"
D [01/Jan/2012:18:59:35 +0100] [CGI] envp[10] = "SERVER_ADMIN=root@mamapc"
D [01/Jan/2012:18:59:35 +0100] [CGI] envp[11] = "SOFTWARE=CUPS/1.5.0"
D [01/Jan/2012:18:59:35 +0100] [CGI] envp[12] = "TMPDIR=/var/spool/cups/tmp"
D [01/Jan/2012:18:59:35 +0100] [CGI] envp[13] = "USER=root"
D [01/Jan/2012:18:59:35 +0100] [CGI] envp[14] = "CUPS_SERVER=/var/run/cups/cups.sock"
D [01/Jan/2012:18:59:35 +0100] [CGI] envp[15] = "CUPS_ENCRYPTION=IfRequested"
D [01/Jan/2012:18:59:35 +0100] [CGI] envp[16] = "IPP_PORT=631"
D [01/Jan/2012:18:59:35 +0100] [CGI] envp[17] = "AUTH_TYPE=PeerCred"
D [01/Jan/2012:18:59:35 +0100] [CGI] envp[18] = "LANG=en_US.UTF8"
D [01/Jan/2012:18:59:35 +0100] [CGI] envp[19] = "REDIRECT_STATUS=1"
D [01/Jan/2012:18:59:35 +0100] [CGI] envp[20] = "GATEWAY_INTERFACE=CGI/1.1"
D [01/Jan/2012:18:59:35 +0100] [CGI] envp[21] = "SERVER_NAME=localhost"
D [01/Jan/2012:18:59:35 +0100] [CGI] envp[22] = "SERVER_PORT=631"
D [01/Jan/2012:18:59:35 +0100] [CGI] envp[23] = "REMOTE_ADDR="
D [01/Jan/2012:18:59:35 +0100] [CGI] envp[24] = "REMOTE_HOST=localhost"
D [01/Jan/2012:18:59:35 +0100] [CGI] envp[25] = "SCRIPT_NAME=/"
D [01/Jan/2012:18:59:35 +0100] [CGI] envp[26] = "SCRIPT_FILENAME=/usr/share/cups/doc/"
D [01/Jan/2012:18:59:35 +0100] [CGI] envp[27] = "REMOTE_USER=root"
D [01/Jan/2012:18:59:35 +0100] [CGI] envp[28] = "SERVER_PROTOCOL=HTTP/1.1"
D [01/Jan/2012:18:59:35 +0100] [CGI] envp[29] = "HTTP_USER_AGENT=CUPS/1.5.0"
D [01/Jan/2012:18:59:35 +0100] [CGI] envp[30] = "REQUEST_METHOD=POST"
D [01/Jan/2012:18:59:35 +0100] [CGI] envp[31] = "CONTENT_LENGTH=244"
D [01/Jan/2012:18:59:35 +0100] [CGI] envp[32] = "CONTENT_TYPE=application/ipp"
D [01/Jan/2012:18:59:35 +0100] [CGI] Started /usr/lib/cups/daemon/cups-deviced (PID 948)
I [01/Jan/2012:18:59:35 +0100] Started "/usr/lib/cups/daemon/cups-deviced" (pid=948)
D [01/Jan/2012:18:59:35 +0100] cupsdSendCommand: 16 file=14
D [01/Jan/2012:18:59:35 +0100] [cups-deviced] Started backend /usr/lib/cups/backend/mdns (PID 949)
D [01/Jan/2012:18:59:35 +0100] [cups-deviced] Started backend /usr/lib/cups/backend/usb (PID 950)
D [01/Jan/2012:18:59:35 +0100] [cups-deviced] Started backend /usr/lib/cups/backend/ipps (PID 951)
D [01/Jan/2012:18:59:35 +0100] [cups-deviced] Started backend /usr/lib/cups/backend/serial (PID 952)
D [01/Jan/2012:18:59:35 +0100] [cups-deviced] PID 949 (mdns) exited with no errors.
D [01/Jan/2012:18:59:35 +0100] [CGI] list_devices
D [01/Jan/2012:18:59:35 +0100] [CGI] usb_find_busses=2
D [01/Jan/2012:18:59:35 +0100] [CGI] usb_find_devices=7
D [01/Jan/2012:18:59:35 +0100] [CGI] libusb couldn't open USB device /dev/bus/usb/002/002: Permission denied.
D [01/Jan/2012:18:59:35 +0100] [CGI] libusb requires write access to USB device nodes.
D [01/Jan/2012:18:59:35 +0100] [cups-deviced] PID 950 (usb) exited with no errors.
D [01/Jan/2012:18:59:35 +0100] [CGI] Flushed attributes...
D [01/Jan/2012:18:59:35 +0100] [cups-deviced] Found device "ipps"...
D [01/Jan/2012:18:59:35 +0100] [cups-deviced] PID 951 (ipps) exited with no errors.
D [01/Jan/2012:18:59:35 +0100] Script header: Content-Type: application/ipp
D [01/Jan/2012:18:59:35 +0100] Script header:
D [01/Jan/2012:18:59:35 +0100] [CGI] Flushed attributes...
D [01/Jan/2012:18:59:35 +0100] [cups-deviced] Found device "serial:/dev/ttyS0?baud=115200"...
D [01/Jan/2012:18:59:35 +0100] [CGI] Flushed attributes...
D [01/Jan/2012:18:59:35 +0100] [cups-deviced] Found device "serial:/dev/ttyS1?baud=115200"...
D [01/Jan/2012:18:59:35 +0100] [cups-deviced] PID 952 (serial) exited with no errors.
D [01/Jan/2012:18:59:35 +0100] PID 948 (/usr/lib/cups/daemon/cups-deviced) exited with no errors.
D [01/Jan/2012:18:59:35 +0100] cupsdSetBusyState: newbusy="Not busy", busy="Active clients"
D [01/Jan/2012:18:59:35 +0100] cupsdReadClient: 16 WAITING Closing on EOF
D [01/Jan/2012:18:59:35 +0100] cupsdCloseClient: 16
D [01/Jan/2012:18:59:35 +0100] cupsdSetBusyState: newbusy="Not busy", busy="Not busy"
D [01/Jan/2012:19:00:23 +0100] Report: clients=1
D [01/Jan/2012:19:00:23 +0100] Report: jobs=0
D [01/Jan/2012:19:00:23 +0100] Report: jobs-active=0
D [01/Jan/2012:19:00:23 +0100] Report: printers=0
D [01/Jan/2012:19:00:23 +0100] Report: printers-implicit=0
D [01/Jan/2012:19:00:23 +0100] Report: stringpool-string-count=407
D [01/Jan/2012:19:00:23 +0100] Report: stringpool-alloc-bytes=4648
D [01/Jan/2012:19:00:23 +0100] Report: stringpool-total-bytes=5736
D [01/Jan/2012:19:01:15 +0100] cupsdReadClient: 13 WAITING Closing on EOF
D [01/Jan/2012:19:01:15 +0100] cupsdCloseClient: 13
D [01/Jan/2012:19:01:15 +0100] cupsdSetBusyState: newbusy="Not busy", busy="Not busy"
D [01/Jan/2012:19:19:03 +0100] Report: clients=0
D [01/Jan/2012:19:19:03 +0100] Report: jobs=0
D [01/Jan/2012:19:19:03 +0100] Report: jobs-active=0
D [01/Jan/2012:19:19:03 +0100] Report: printers=0
D [01/Jan/2012:19:19:03 +0100] Report: printers-implicit=0
D [01/Jan/2012:19:19:03 +0100] Report: stringpool-string-count=407
D [01/Jan/2012:19:19:03 +0100] Report: stringpool-alloc-bytes=4648
D [01/Jan/2012:19:19:03 +0100] Report: stringpool-total-bytes=5736
D [01/Jan/2012:19:22:10 +0100] Report: clients=0
D [01/Jan/2012:19:22:11 +0100] Report: jobs=0
D [01/Jan/2012:19:22:11 +0100] Report: jobs-active=0
D [01/Jan/2012:19:22:11 +0100] Report: printers=0
D [01/Jan/2012:19:22:11 +0100] Report: printers-implicit=0
D [01/Jan/2012:19:22:11 +0100] Report: stringpool-string-count=407
D [01/Jan/2012:19:22:11 +0100] Report: stringpool-alloc-bytes=4648
D [01/Jan/2012:19:22:11 +0100] Report: stringpool-total-bytes=5736
D [01/Jan/2012:19:24:21 +0100] Report: clients=0
D [01/Jan/2012:19:24:21 +0100] Report: jobs=0
D [01/Jan/2012:19:24:21 +0100] Report: jobs-active=0
D [01/Jan/2012:19:24:21 +0100] Report: printers=0
D [01/Jan/2012:19:24:21 +0100] Report: printers-implicit=0
D [01/Jan/2012:19:24:21 +0100] Report: stringpool-string-count=407
D [01/Jan/2012:19:24:21 +0100] Report: stringpool-alloc-bytes=4648
D [01/Jan/2012:19:24:21 +0100] Report: stringpool-total-bytes=5736
D [01/Jan/2012:19:27:26 +0100] Report: clients=0
D [01/Jan/2012:19:27:26 +0100] Report: jobs=0
D [01/Jan/2012:19:27:26 +0100] Report: jobs-active=0
D [01/Jan/2012:19:27:26 +0100] Report: printers=0
D [01/Jan/2012:19:27:26 +0100] Report: printers-implicit=0
D [01/Jan/2012:19:27:26 +0100] Report: stringpool-string-count=407
D [01/Jan/2012:19:27:26 +0100] Report: stringpool-alloc-bytes=4648
D [01/Jan/2012:19:27:26 +0100] Report: stringpool-total-bytes=5736
D [01/Jan/2012:19:37:11 +0100] Report: clients=0
D [01/Jan/2012:19:37:11 +0100] Report: jobs=0
D [01/Jan/2012:19:37:11 +0100] Report: jobs-active=0
D [01/Jan/2012:19:37:11 +0100] Report: printers=0
D [01/Jan/2012:19:37:11 +0100] Report: printers-implicit=0
D [01/Jan/2012:19:37:11 +0100] Report: stringpool-string-count=407
D [01/Jan/2012:19:37:11 +0100] Report: stringpool-alloc-bytes=4648
D [01/Jan/2012:19:37:11 +0100] Report: stringpool-total-bytes=5736
I [01/Jan/2012:19:37:41 +0100] Scheduler shutting down normally.
D [01/Jan/2012:19:37:41 +0100] Discarding unused server-stopped event...
I [01/Jan/2012:19:37:41 +0100] Saving job.cache...
I [01/Jan/2012:19:38:18 +0100] Listening to [v1.::1]:631 (IPv6)
I [01/Jan/2012:19:38:18 +0100] Listening to 127.0.0.1:631 (IPv4)
I [01/Jan/2012:19:38:18 +0100] Listening to /var/run/cups/cups.sock (Domain)
I [01/Jan/2012:19:38:18 +0100] Remote access is disabled.
D [01/Jan/2012:19:38:18 +0100] Added auto ServerAlias mamapc
I [01/Jan/2012:19:38:18 +0100] Loaded configuration file "/etc/cups/cupsd.conf"
D [01/Jan/2012:19:38:18 +0100] Creating missing directory "/var/run/cups"
D [01/Jan/2012:19:38:18 +0100] Repairing ownership of "/var/run/cups"
D [01/Jan/2012:19:38:18 +0100] Repairing access permissions of "/var/run/cups"
D [01/Jan/2012:19:38:18 +0100] Creating missing directory "/var/run/cups/certs"
D [01/Jan/2012:19:38:18 +0100] Repairing ownership of "/var/run/cups/certs"
D [01/Jan/2012:19:38:18 +0100] Repairing access permissions of "/var/run/cups/certs"
I [01/Jan/2012:19:38:18 +0100] Using default TempDir of /var/spool/cups/tmp...
I [01/Jan/2012:19:38:18 +0100] Configured for up to 100 clients.
I [01/Jan/2012:19:38:18 +0100] Allowing up to 100 client connections per host.
I [01/Jan/2012:19:38:18 +0100] Using policy "default" as the default.
I [01/Jan/2012:19:38:18 +0100] Full reload is required.
I [01/Jan/2012:19:38:19 +0100] Loaded MIME database from "/usr/share/cups/mime" and "/etc/cups": 35 types, 42 filters...
I [01/Jan/2012:19:38:19 +0100] Loading job cache file "/var/cache/cups/job.cache"...
I [01/Jan/2012:19:38:19 +0100] Full reload complete.
D [01/Jan/2012:19:38:19 +0100] cupsdCleanFiles(path="/var/spool/cups/tmp", pattern="(null)")
I [01/Jan/2012:19:38:19 +0100] Cleaning out old files in "/var/spool/cups/tmp"...
D [01/Jan/2012:19:38:19 +0100] Removed "/var/spool/cups/tmp/0039f4f0366a5"...
D [01/Jan/2012:19:38:19 +0100] cupsdCleanFiles(path="/var/cache/cups", pattern="*.ipp")
I [01/Jan/2012:19:38:19 +0100] Cleaning out old files in "/var/cache/cups"...
I [01/Jan/2012:19:38:19 +0100] Listening to [v1.::1]:631 on fd 8...
I [01/Jan/2012:19:38:19 +0100] Listening to 127.0.0.1:631 on fd 9...
I [01/Jan/2012:19:38:19 +0100] Listening to /var/run/cups/cups.sock:631 on fd 10...
I [01/Jan/2012:19:38:19 +0100] Resuming new connection processing...
D [01/Jan/2012:19:38:19 +0100] cupsdSetBusyState: newbusy="Not busy", busy="Not busy"
D [01/Jan/2012:19:38:19 +0100] Discarding unused server-started event...
D [01/Jan/2012:19:38:20 +0100] Report: clients=0
D [01/Jan/2012:19:38:20 +0100] Report: jobs=0
D [01/Jan/2012:19:38:20 +0100] Report: jobs-active=0
D [01/Jan/2012:19:38:20 +0100] Report: printers=0
D [01/Jan/2012:19:38:20 +0100] Report: printers-implicit=0
D [01/Jan/2012:19:38:20 +0100] Report: stringpool-string-count=289
D [01/Jan/2012:19:38:20 +0100] Report: stringpool-alloc-bytes=4648
D [01/Jan/2012:19:38:20 +0100] Report: stringpool-total-bytes=4792
I [01/Jan/2012:20:53:48 +0100] Scheduler shutting down normally.
D [01/Jan/2012:20:53:48 +0100] Discarding unused server-stopped event...
I [01/Jan/2012:20:53:48 +0100] Saving job.cache...
I [01/Jan/2012:20:54:26 +0100] Listening to [v1.::1]:631 (IPv6)
I [01/Jan/2012:20:54:26 +0100] Listening to 127.0.0.1:631 (IPv4)
I [01/Jan/2012:20:54:26 +0100] Listening to /var/run/cups/cups.sock (Domain)
I [01/Jan/2012:20:54:26 +0100] Remote access is disabled.
D [01/Jan/2012:20:54:26 +0100] Added auto ServerAlias mamapc
I [01/Jan/2012:20:54:26 +0100] Loaded configuration file "/etc/cups/cupsd.conf"
D [01/Jan/2012:20:54:26 +0100] Creating missing directory "/var/run/cups"
D [01/Jan/2012:20:54:26 +0100] Repairing ownership of "/var/run/cups"
D [01/Jan/2012:20:54:26 +0100] Repairing access permissions of "/var/run/cups"
D [01/Jan/2012:20:54:26 +0100] Creating missing directory "/var/run/cups/certs"
D [01/Jan/2012:20:54:26 +0100] Repairing ownership of "/var/run/cups/certs"
D [01/Jan/2012:20:54:26 +0100] Repairing access permissions of "/var/run/cups/certs"
I [01/Jan/2012:20:54:26 +0100] Using default TempDir of /var/spool/cups/tmp...
I [01/Jan/2012:20:54:26 +0100] Configured for up to 100 clients.
I [01/Jan/2012:20:54:26 +0100] Allowing up to 100 client connections per host.
I [01/Jan/2012:20:54:26 +0100] Using policy "default" as the default.
I [01/Jan/2012:20:54:26 +0100] Full reload is required.
I [01/Jan/2012:20:54:27 +0100] Loaded MIME database from "/usr/share/cups/mime" and "/etc/cups": 35 types, 42 filters...
I [01/Jan/2012:20:54:27 +0100] Loading job cache file "/var/cache/cups/job.cache"...
I [01/Jan/2012:20:54:27 +0100] Full reload complete.
D [01/Jan/2012:20:54:27 +0100] cupsdCleanFiles(path="/var/spool/cups/tmp", pattern="(null)")
I [01/Jan/2012:20:54:27 +0100] Cleaning out old files in "/var/spool/cups/tmp"...
D [01/Jan/2012:20:54:27 +0100] cupsdCleanFiles(path="/var/cache/cups", pattern="*.ipp")
I [01/Jan/2012:20:54:27 +0100] Cleaning out old files in "/var/cache/cups"...
I [01/Jan/2012:20:54:27 +0100] Listening to [v1.::1]:631 on fd 8...
I [01/Jan/2012:20:54:27 +0100] Listening to 127.0.0.1:631 on fd 9...
I [01/Jan/2012:20:54:27 +0100] Listening to /var/run/cups/cups.sock:631 on fd 10...
I [01/Jan/2012:20:54:27 +0100] Resuming new connection processing...
D [01/Jan/2012:20:54:27 +0100] cupsdSetBusyState: newbusy="Not busy", busy="Not busy"
D [01/Jan/2012:20:54:27 +0100] Discarding unused server-started event...
D [01/Jan/2012:20:54:28 +0100] Report: clients=0
D [01/Jan/2012:20:54:28 +0100] Report: jobs=0
D [01/Jan/2012:20:54:28 +0100] Report: jobs-active=0
D [01/Jan/2012:20:54:28 +0100] Report: printers=0
D [01/Jan/2012:20:54:28 +0100] Report: printers-implicit=0
D [01/Jan/2012:20:54:28 +0100] Report: stringpool-string-count=289
D [01/Jan/2012:20:54:28 +0100] Report: stringpool-alloc-bytes=4648
D [01/Jan/2012:20:54:28 +0100] Report: stringpool-total-bytes=4792
I [02/Jan/2012:05:34:23 +0100] Scheduler shutting down normally.
D [02/Jan/2012:05:34:24 +0100] Discarding unused server-stopped event...
I [02/Jan/2012:05:34:24 +0100] Saving job.cache...
I [02/Jan/2012:05:35:05 +0100] Listening to [v1.::1]:631 (IPv6)
I [02/Jan/2012:05:35:05 +0100] Listening to 127.0.0.1:631 (IPv4)
I [02/Jan/2012:05:35:05 +0100] Listening to /var/run/cups/cups.sock (Domain)
I [02/Jan/2012:05:35:05 +0100] Remote access is disabled.
D [02/Jan/2012:05:35:05 +0100] Added auto ServerAlias mamapc
I [02/Jan/2012:05:35:05 +0100] Loaded configuration file "/etc/cups/cupsd.conf"
D [02/Jan/2012:05:35:05 +0100] Creating missing directory "/var/run/cups"
D [02/Jan/2012:05:35:05 +0100] Repairing ownership of "/var/run/cups"
D [02/Jan/2012:05:35:05 +0100] Repairing access permissions of "/var/run/cups"
D [02/Jan/2012:05:35:05 +0100] Creating missing directory "/var/run/cups/certs"
D [02/Jan/2012:05:35:05 +0100] Repairing ownership of "/var/run/cups/certs"
D [02/Jan/2012:05:35:05 +0100] Repairing access permissions of "/var/run/cups/certs"
I [02/Jan/2012:05:35:05 +0100] Using default TempDir of /var/spool/cups/tmp...
I [02/Jan/2012:05:35:05 +0100] Configured for up to 100 clients.
I [02/Jan/2012:05:35:05 +0100] Allowing up to 100 client connections per host.
I [02/Jan/2012:05:35:05 +0100] Using policy "default" as the default.
I [02/Jan/2012:05:35:05 +0100] Full reload is required.
I [02/Jan/2012:05:35:06 +0100] Loaded MIME database from "/usr/share/cups/mime" and "/etc/cups": 35 types, 42 filters...
I [02/Jan/2012:05:35:06 +0100] Loading job cache file "/var/cache/cups/job.cache"...
I [02/Jan/2012:05:35:06 +0100] Full reload complete.
D [02/Jan/2012:05:35:06 +0100] cupsdCleanFiles(path="/var/spool/cups/tmp", pattern="(null)")
I [02/Jan/2012:05:35:06 +0100] Cleaning out old files in "/var/spool/cups/tmp"...
D [02/Jan/2012:05:35:06 +0100] cupsdCleanFiles(path="/var/cache/cups", pattern="*.ipp")
I [02/Jan/2012:05:35:06 +0100] Cleaning out old files in "/var/cache/cups"...
I [02/Jan/2012:05:35:06 +0100] Listening to [v1.::1]:631 on fd 8...
I [02/Jan/2012:05:35:06 +0100] Listening to 127.0.0.1:631 on fd 9...
I [02/Jan/2012:05:35:06 +0100] Listening to /var/run/cups/cups.sock:631 on fd 10...
I [02/Jan/2012:05:35:06 +0100] Resuming new connection processing...
D [02/Jan/2012:05:35:06 +0100] cupsdSetBusyState: newbusy="Not busy", busy="Not busy"
D [02/Jan/2012:05:35:06 +0100] Discarding unused server-started event...
D [02/Jan/2012:05:35:07 +0100] Report: clients=0
D [02/Jan/2012:05:35:07 +0100] Report: jobs=0
D [02/Jan/2012:05:35:07 +0100] Report: jobs-active=0
D [02/Jan/2012:05:35:07 +0100] Report: printers=0
D [02/Jan/2012:05:35:07 +0100] Report: printers-implicit=0
D [02/Jan/2012:05:35:07 +0100] Report: stringpool-string-count=289
D [02/Jan/2012:05:35:07 +0100] Report: stringpool-alloc-bytes=4648
D [02/Jan/2012:05:35:07 +0100] Report: stringpool-total-bytes=4792
I [02/Jan/2012:05:56:24 +0100] Scheduler shutting down normally.
D [02/Jan/2012:05:56:24 +0100] Discarding unused server-stopped event...
I [02/Jan/2012:05:56:24 +0100] Saving job.cache...
I [02/Jan/2012:17:22:51 +0100] Listening to [v1.::1]:631 (IPv6)
I [02/Jan/2012:17:22:51 +0100] Listening to 127.0.0.1:631 (IPv4)
I [02/Jan/2012:17:22:51 +0100] Listening to /var/run/cups/cups.sock (Domain)
I [02/Jan/2012:17:22:51 +0100] Remote access is disabled.
D [02/Jan/2012:17:22:51 +0100] Added auto ServerAlias mamapc
I [02/Jan/2012:17:22:51 +0100] Loaded configuration file "/etc/cups/cupsd.conf"
D [02/Jan/2012:17:22:51 +0100] Creating missing directory "/var/run/cups"
D [02/Jan/2012:17:22:51 +0100] Repairing ownership of "/var/run/cups"
D [02/Jan/2012:17:22:51 +0100] Repairing access permissions of "/var/run/cups"
D [02/Jan/2012:17:22:51 +0100] Creating missing directory "/var/run/cups/certs"
D [02/Jan/2012:17:22:51 +0100] Repairing ownership of "/var/run/cups/certs"
D [02/Jan/2012:17:22:51 +0100] Repairing access permissions of "/var/run/cups/certs"
I [02/Jan/2012:17:22:51 +0100] Using default TempDir of /var/spool/cups/tmp...
I [02/Jan/2012:17:22:51 +0100] Configured for up to 100 clients.
I [02/Jan/2012:17:22:51 +0100] Allowing up to 100 client connections per host.
I [02/Jan/2012:17:22:51 +0100] Using policy "default" as the default.
I [02/Jan/2012:17:22:51 +0100] Full reload is required.
I [02/Jan/2012:17:22:52 +0100] Loaded MIME database from "/usr/share/cups/mime" and "/etc/cups": 35 types, 42 filters...
I [02/Jan/2012:17:22:52 +0100] Loading job cache file "/var/cache/cups/job.cache"...
I [02/Jan/2012:17:22:52 +0100] Full reload complete.
D [02/Jan/2012:17:22:52 +0100] cupsdCleanFiles(path="/var/spool/cups/tmp", pattern="(null)")
I [02/Jan/2012:17:22:52 +0100] Cleaning out old files in "/var/spool/cups/tmp"...
D [02/Jan/2012:17:22:52 +0100] cupsdCleanFiles(path="/var/cache/cups", pattern="*.ipp")
I [02/Jan/2012:17:22:52 +0100] Cleaning out old files in "/var/cache/cups"...
I [02/Jan/2012:17:22:52 +0100] Listening to [v1.::1]:631 on fd 8...
I [02/Jan/2012:17:22:52 +0100] Listening to 127.0.0.1:631 on fd 9...
I [02/Jan/2012:17:22:52 +0100] Listening to /var/run/cups/cups.sock:631 on fd 10...
I [02/Jan/2012:17:22:52 +0100] Resuming new connection processing...
D [02/Jan/2012:17:22:52 +0100] cupsdSetBusyState: newbusy="Not busy", busy="Not busy"
D [02/Jan/2012:17:22:52 +0100] Discarding unused server-started event...
D [02/Jan/2012:17:22:53 +0100] Report: clients=0
D [02/Jan/2012:17:22:53 +0100] Report: jobs=0
D [02/Jan/2012:17:22:53 +0100] Report: jobs-active=0
D [02/Jan/2012:17:22:53 +0100] Report: printers=0
D [02/Jan/2012:17:22:53 +0100] Report: printers-implicit=0
D [02/Jan/2012:17:22:53 +0100] Report: stringpool-string-count=289
D [02/Jan/2012:17:22:53 +0100] Report: stringpool-alloc-bytes=4648
D [02/Jan/2012:17:22:53 +0100] Report: stringpool-total-bytes=4792
I [02/Jan/2012:18:15:27 +0100] Scheduler shutting down normally.
D [02/Jan/2012:18:15:27 +0100] Discarding unused server-stopped event...
I [02/Jan/2012:18:15:27 +0100] Saving job.cache...
E [02/Jan/2012:18:40:40 +0100] cupsdAuthorize: pam_authenticate() returned 7 (Authentication failure)!
E [02/Jan/2012:18:41:03 +0100] Bad request line "%16%03%01" from localhost!
E [02/Jan/2012:18:41:03 +0100] Bad request line "%16%03%01" from localhost!
E [02/Jan/2012:18:41:03 +0100] Bad request line "%16%03%01" from localhost!
E [02/Jan/2012:18:41:03 +0100] Bad request line "%16%03%01" from localhost!
E [02/Jan/2012:18:41:04 +0100] Bad request line "%16%03%01" from localhost!
E [02/Jan/2012:18:44:36 +0100] Returning HTTP Forbidden for CUPS-Delete-Printer (ipp://localhost/printers/Epson-Stylus-SX218) from localhost
E [02/Jan/2012:18:46:25 +0100] Returning IPP client-error-document-format-not-supported for Print-Job (ipp://localhost:631/printers/Epson_Stylus_SX218) from localhost
E [02/Jan/2012:18:54:25 +0100] Bad request line "%16%03%01" from localhost!
E [02/Jan/2012:18:54:25 +0100] Bad request line "%16%03%01" from localhost!
E [02/Jan/2012:18:54:25 +0100] Bad request line "%16%03%01" from localhost!
E [02/Jan/2012:18:54:26 +0100] Bad request line "%16%03%01" from localhost!
E [02/Jan/2012:18:56:58 +0100] Bad request line "%16%03%01" from localhost!
E [02/Jan/2012:18:58:04 +0100] Bad request line "%16%03%01" from localhost!
E [02/Jan/2012:18:58:04 +0100] Bad request line "%16%03%01" from localhost!
W [02/Jan/2012:19:01:48 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Brother/BR5070DN_GPL.ppd.gz!
E [02/Jan/2012:19:01:49 +0100] [cups-driverd] Bad driver information file "/usr/share/cups/model/foomatic-db-ppds/Kyocera/ReadMe.htm"!
W [02/Jan/2012:19:01:53 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/KONICA_MINOLTA/KOC451JX.ppd.gz!
W [02/Jan/2012:19:01:53 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Xerox/xrx6120pu.ppd!
W [02/Jan/2012:19:01:54 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp950c.ppd.gz!
W [02/Jan/2012:19:01:54 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp960s.ppd.gz!
W [02/Jan/2012:19:01:54 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp9100.ppd.gz!
W [02/Jan/2012:19:01:54 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp880c.ppd.gz!
W [02/Jan/2012:19:01:54 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp980c.ppd.gz!
W [02/Jan/2012:19:01:54 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp850c.ppd.gz!
W [02/Jan/2012:19:01:54 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp920c.ppd.gz!
W [02/Jan/2012:19:01:54 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp830c.ppd.gz!
E [02/Jan/2012:19:02:06 +0100] Bad request line "%16%03%01" from localhost!
E [02/Jan/2012:19:02:11 +0100] Bad request line "%16%03%01" from localhost!
E [02/Jan/2012:19:02:11 +0100] Bad request line "%16%03%01" from localhost!
E [02/Jan/2012:19:02:11 +0100] Bad request line "%16%03%01" from localhost!
W [02/Jan/2012:19:02:57 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Brother/BR5070DN_GPL.ppd.gz!
E [02/Jan/2012:19:02:57 +0100] [cups-driverd] Bad driver information file "/usr/share/cups/model/foomatic-db-ppds/Kyocera/ReadMe.htm"!
W [02/Jan/2012:19:02:57 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/KONICA_MINOLTA/KOC451JX.ppd.gz!
W [02/Jan/2012:19:02:57 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Xerox/xrx6120pu.ppd!
W [02/Jan/2012:19:02:57 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp950c.ppd.gz!
W [02/Jan/2012:19:02:57 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp960s.ppd.gz!
W [02/Jan/2012:19:02:57 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp9100.ppd.gz!
W [02/Jan/2012:19:02:57 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp880c.ppd.gz!
W [02/Jan/2012:19:02:57 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp980c.ppd.gz!
W [02/Jan/2012:19:02:57 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp850c.ppd.gz!
W [02/Jan/2012:19:02:57 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp920c.ppd.gz!
W [02/Jan/2012:19:02:57 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp830c.ppd.gz!
W [02/Jan/2012:19:03:42 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Brother/BR5070DN_GPL.ppd.gz!
E [02/Jan/2012:19:03:42 +0100] [cups-driverd] Bad driver information file "/usr/share/cups/model/foomatic-db-ppds/Kyocera/ReadMe.htm"!
W [02/Jan/2012:19:03:42 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/KONICA_MINOLTA/KOC451JX.ppd.gz!
W [02/Jan/2012:19:03:43 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Xerox/xrx6120pu.ppd!
W [02/Jan/2012:19:03:43 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp950c.ppd.gz!
W [02/Jan/2012:19:03:43 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp960s.ppd.gz!
W [02/Jan/2012:19:03:43 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp9100.ppd.gz!
W [02/Jan/2012:19:03:43 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp880c.ppd.gz!
W [02/Jan/2012:19:03:43 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp980c.ppd.gz!
W [02/Jan/2012:19:03:43 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp850c.ppd.gz!
W [02/Jan/2012:19:03:43 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp920c.ppd.gz!
W [02/Jan/2012:19:03:43 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp830c.ppd.gz!
W [02/Jan/2012:19:04:46 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Brother/BR5070DN_GPL.ppd.gz!
E [02/Jan/2012:19:04:46 +0100] [cups-driverd] Bad driver information file "/usr/share/cups/model/foomatic-db-ppds/Kyocera/ReadMe.htm"!
W [02/Jan/2012:19:04:46 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/KONICA_MINOLTA/KOC451JX.ppd.gz!
W [02/Jan/2012:19:04:46 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Xerox/xrx6120pu.ppd!
W [02/Jan/2012:19:04:46 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp950c.ppd.gz!
W [02/Jan/2012:19:04:46 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp960s.ppd.gz!
W [02/Jan/2012:19:04:46 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp9100.ppd.gz!
W [02/Jan/2012:19:04:46 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp880c.ppd.gz!
W [02/Jan/2012:19:04:46 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp980c.ppd.gz!
W [02/Jan/2012:19:04:46 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp850c.ppd.gz!
W [02/Jan/2012:19:04:46 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp920c.ppd.gz!
W [02/Jan/2012:19:04:46 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp830c.ppd.gz!
E [02/Jan/2012:19:05:17 +0100] Bad request line "%16%03%01" from localhost!
W [02/Jan/2012:19:06:12 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Brother/BR5070DN_GPL.ppd.gz!
E [02/Jan/2012:19:06:12 +0100] [cups-driverd] Bad driver information file "/usr/share/cups/model/foomatic-db-ppds/Kyocera/ReadMe.htm"!
W [02/Jan/2012:19:06:12 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/KONICA_MINOLTA/KOC451JX.ppd.gz!
W [02/Jan/2012:19:06:12 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Xerox/xrx6120pu.ppd!
W [02/Jan/2012:19:06:12 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp950c.ppd.gz!
W [02/Jan/2012:19:06:12 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp960s.ppd.gz!
W [02/Jan/2012:19:06:12 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp9100.ppd.gz!
W [02/Jan/2012:19:06:12 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp880c.ppd.gz!
W [02/Jan/2012:19:06:12 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp980c.ppd.gz!
W [02/Jan/2012:19:06:12 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp850c.ppd.gz!
W [02/Jan/2012:19:06:12 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp920c.ppd.gz!
W [02/Jan/2012:19:06:12 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp830c.ppd.gz!
E [02/Jan/2012:19:06:57 +0100] Bad request line "%16%03%01" from localhost!
E [02/Jan/2012:19:06:58 +0100] Bad request line "%16%03%01" from localhost!
E [02/Jan/2012:19:15:57 +0100] Avahi client failed, closing client to allow a clean restart
W [02/Jan/2012:19:18:48 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Brother/BR5070DN_GPL.ppd.gz!
E [02/Jan/2012:19:18:48 +0100] [cups-driverd] Bad driver information file "/usr/share/cups/model/foomatic-db-ppds/Kyocera/ReadMe.htm"!
W [02/Jan/2012:19:18:49 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/KONICA_MINOLTA/KOC451JX.ppd.gz!
W [02/Jan/2012:19:18:49 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Xerox/xrx6120pu.ppd!
W [02/Jan/2012:19:18:49 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp950c.ppd.gz!
W [02/Jan/2012:19:18:49 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp960s.ppd.gz!
W [02/Jan/2012:19:18:49 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp9100.ppd.gz!
W [02/Jan/2012:19:18:49 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp880c.ppd.gz!
W [02/Jan/2012:19:18:49 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp980c.ppd.gz!
W [02/Jan/2012:19:18:49 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp850c.ppd.gz!
W [02/Jan/2012:19:18:49 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp920c.ppd.gz!
W [02/Jan/2012:19:18:49 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp830c.ppd.gz!
W [02/Jan/2012:19:19:55 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Brother/BR5070DN_GPL.ppd.gz!
E [02/Jan/2012:19:19:55 +0100] [cups-driverd] Bad driver information file "/usr/share/cups/model/foomatic-db-ppds/Kyocera/ReadMe.htm"!
W [02/Jan/2012:19:19:55 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/KONICA_MINOLTA/KOC451JX.ppd.gz!
W [02/Jan/2012:19:19:55 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Xerox/xrx6120pu.ppd!
W [02/Jan/2012:19:19:55 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp950c.ppd.gz!
W [02/Jan/2012:19:19:55 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp960s.ppd.gz!
W [02/Jan/2012:19:19:55 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp9100.ppd.gz!
W [02/Jan/2012:19:19:55 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp880c.ppd.gz!
W [02/Jan/2012:19:19:55 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp980c.ppd.gz!
W [02/Jan/2012:19:19:55 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp850c.ppd.gz!
W [02/Jan/2012:19:19:55 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp920c.ppd.gz!
W [02/Jan/2012:19:19:55 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp830c.ppd.gz!
E [02/Jan/2012:19:20:30 +0100] Returning IPP client-error-document-format-not-supported for Print-Job (ipp://localhost:631/printers/Epson_Stylus_SX218) from localhost
E [02/Jan/2012:19:24:03 +0100] Returning IPP client-error-document-format-not-supported for Send-Document (ipp://localhost:631/printers/Epson_Stylus_SX218) from localhost
Please let me know if you should need other outputs, logfiles, etc. I appreciate any idea that could help me to get this damn thing to finally print something.
Thank you very much!Hi Radhakrishnan,
ORARRP doesn't actually do any printing itself. Via COM/Active-X, it calls the appropriate program that corresponds to the type of output, and then this program does the actual printing. For PDF, it calls Acrobat Reader to print the document. Acrobat Reader displays the printer dialog to let you choose which printer to use, and then when you click OK, Acrobat Reader prints the document and sends it to the printer.
I expect that you'll find that when you use Acrobat Reader yourself on this machine it has exactly the same problems with this particular printer configuration. If so, you'll need to contact Adobe for further assistance.
regards,
Stewart -
Billing due list problem with customized document types
Dear Team,
We have created a new Rental contract and Rental Invoice document types by copying the standard ones (MV & FV), while trying to get the Billing due list, unable to get the Rental Invoice type, rather the system is proposing the standard Invoice type (i have already changed the Billing type to the customized one in sales document type).
Can you please let me know the pre-requisites for the billing due list.
Regards
SreedharHi,
Thank you for your response. But, i was not able to implement those oss notes as the current highest support package we are currently using is SAPKB70208, Software component - SAP-BASIS.
Kindly let me know if you have more inputs.
Regards,
Vinitha -
How to block a Billing Document Type?
Hi forum
I need to block the billing document type FV-Invoice Contract.
Is there some configuration to do that? I found VOFA where you can change billings documents, but I cant find how to block it.
Thanks for your support.If I am correct, go to IMG Sales and Distribution --> Billing --> Billing document --> Define Blocking reasons --> Aassign blocking reasons to billing types.
Right now I dont have access to SAP and hence not sure on the path.
thanks
G. Lakshmipathi -
Duplicate BP Reference Numbers for same document type -need check on orders
Version: (2007A)
Description of requirements:
The user is allowed to create two sales orders for the same customer that have exactly the same BP Reference. When the user invoices one of them and then tries to invoice another, they are warned that there is already a document of the same type with this reference number. The problem is, they ship the goods out physically before they actually create the invoice document, so that by the time they are entering the invoice in the system, the goods have already been shipped twice, when they should only have been shipped once, If they were warned when they were adding or updating the order, then this could be prevented from happening. Same thing for vendors. Our customers would like to have the check for duplicate BP references on the purchase order as well as on the AP Invoices.
Business needs: Our Clientsu2019 customers are receiving duplicate shipments and this has a negative impact on their business relationship as it creates costly extra work and inconvenience for all.
Examples: Would like the same check that is currently on AR and AP Invoices for the same BP reference number existing already on the same document type implemented on the sales order and purchase order. When the user is adding an invoice for a BP and there is already an invoice for the BP with the same BP reference number, the user is warned and asked if they want to continue.
Current Workaround: None. As our customers often physically ship the goods before creating an invoice from the order, there are duplicate shipments and this is most inconvenient and costly to our customers as well as their customers.
Proposed solution: see above. This is a high priority item for our customers.
Sally Weinrauch,
Senior Support Analyst
Coastal Range Systems Inc.
Recipients of: SAP's Partner of the Year 2007 & 2005,
North America's Top Ten 2008, 2007 & 2006.
200 - 6400 Roberts Street, Burnaby, BC, V5G 4C9hi,
Use SP_TransactionNotification to block sales order & purchase order from adding having duplicate bp reference number.
SAP Note 1258097 - Can the Suppliers Reference number be
made unique? activated approval procedure also for ar invoice.
It may solve problem.
Jeyakanthan -
Document types show up twice when creating a new blank HTML document.
I followed the below instructions for getting HTML 5 as a document type option on CS4. Although I do have HTML 5 as an option now, my other stock CS4 document type options now show up twice in the menu. Any idea how to fix this?
To add the HTML document type, however, you need to modify the file named MMDocumentTypeDeclarations.xml. Here’s how to do that:
1. Find the configuration folder then navigate to the documenttypes folder. The Configuration folder can be found under the folder where you installed Dreamweaver.
2. Find and make a backup copy of MMDocumentTypeDeclarations.xml (MMDocumentTypeDeclarations.xml.bak)
3. Open MMDocumentTypeDeclarations.xml in your favorite text editor. If anything goes wrong, you can always get back to the default state by replacing your changes with the backup copy.
4. Go to the end of the document and find the </documenttypedeclarations> tag and add the following lines just before the </documenttypedeclarations> tag:
<documenttypedeclaration id="mm_html_5">
<title>
HTML5
</title>
<doctypedecl>
<![CDATA[<!DOCTYPE HTML>]]>
</doctypedecl>
<rootelement>
<![CDATA[<html></html>]]>
</rootelement>
<dtdcontext>html</dtdcontext>
<dtdcontext>html5</dtdcontext>
<dtdcontext>frameset_frame</dtdcontext>
<dtdcontext>xslt</dtdcontext>
</documenttypedeclaration>
5. Save the document
6. Restart Dreamweaver
You should now have an HTML5 document type option when you create a new document.
There was an issue with Dreamweaver CS4 that needed to be fixed in code to fully support HTML5 documents which is why upgrading to CS5 was recommended. In CS4, Dreamweaver’s definition of a well formed HTML document has a meta content type which isn’t required for HTML5 documents so, no matter what we do to CS4, any HTML document created by CS4 will have the following:
<meta http-equiv="Content-Type" content="text/html; charset=utf-8">
Replace that line with this:
<meta charset=utf-8">
You’ll need to do this every time you create a new HTML5 document.
Once you finish go to Preferences New Document and select HTML5 as default Doc Type...
Thanks to:
What I did was create a snippit of the meta and added it to my snippit's meta folder
Jeff Booher
Dreamweaver Engineering
Thanks for your feedback.Hi,
I have done a test and I can reproduced your issue.
I referred to the blog about Automatically create Word documents which include list fields:
http://blogs.technet.com/b/brenclarke/archive/2009/04/15/automatically-create-word-documents-which-include-list-fields.aspx
When I create a multiple line of text column in a list, I just choose Plain text, Then I solved the issue:
Besides, here is a similar post, you can take a look at:
https://social.technet.microsoft.com/Forums/sharepoint/en-US/a7ab3a61-6643-4a47-a464-fe46b5db1558/rich-text-field-showing-html-code
Best Regards,
Lisa Chen
Lisa Chen
TechNet Community Support
Maybe you are looking for
-
I cannot receive emails on my ipad but I can send them. When I try to fetch emails a pop up box tells me to says verify your incoming email setting in settings. I have, it is correct as I am receiving emails on my iPhone with the same incoming addre
-
Can I use my 24 inch' 2007 imac as an external monitor for my PC
can I use my 24 inch' 2007 imac as an external monitor for my PC
-
Can't access preferences, fatal error/crash
I've done a search and found a few other people with the same issue, but none of the suggestions have fixed the issue. The main project will open and edit just fine... I can even publish, as long as I didn't want to change any settings. Anytime I tr
-
Hi! Taking a PSD file, why does it increase in size after every save also after having done changes to it? For example if I open a PSD file and i hide a layer and after I show it, when I go to save the file, it will be bigger in size than original. T
-
Acrobat Connect pro 7, Forgot your password in custom application
Hi we are using Connct pro serive. When i click on the link Forgot your password in login page of Connect Pro Server, it gives the message like "Connect Pro is integrated with your corporate directory (LDAP). Please contact your System Administrator