Document Upload into Webdynpro and transfer to SAP R/3?
Hi Gurus,
I have a requirement to offer a Document uploading option through Java webdynpro screen.
I have referred the below link
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/00062266-3aa9-2910-d485-f1088c3a4d71
which has the steps till uploading the document into Webdynpro
And also I need to offer an option of listing the attachments(that have been attached by the end user into to the JAVA webdynpro form) with the DELETE option ,How to do that?
Now my requirement is to pass the document into SAP R/3? is there any RFC for that?
Thanks in Advance,
Dharani
Hi Dharani,
If we want to add Excel into Java webdynpro screen, then we are trying to create a table with invidual cells. This can be easily possible at Java Portal Perspective using Jakarta HSSF POI API.
But we require at Webdynpro so , we can use the Context feature available at Webdynpro to load the table. now we can load the table data into an excel and we can display it to end users in the form of Excel..
to achieve this functionality pls use the below link
Exporting table data to MS-Excel Sheet(enhanced Web Dynpro Binary Cache)
Just in case if u need to achive through Portal Perspcetive in NWDS pls use this.
Create an excel file from JAVA using HSSF api
the advantage of these two methods is we can create mutable tables i.e. each cell of the table is accessable and can be modifed with using the code.
Hope this will be helpful.
Regards,
Shaila
Similar Messages
-
PDF uploaded into webdynpro application successfully, but unable to open it
Dear colleagues,
We have developed a webdynpro appllication in which there is a functionality to add attachments from our local file to the WD applicaiton and save it. Now the error is that we are able to upload the attachmnets successfully and save it, but when we try to view the file which we upload from the WD application, it gives error message and we are unable to view it. For example, I have PDF form which was uploaded successfully into the WD application and save it. Later when I try to open the PDF form to view it(from the WD application), the adobe reader is opened, but gives error message 'There was an error opening this document. The file is damaged and could not be repaired' and we could not view the contents of the file. Please help me in this regard.
Note: The PDF file has no errors before uploading into the WD application. Similar kind of error is shown for other file formats also - like *.docx, *.xlsx, *.pdf, *.docm, *.ppt, *.pptx etc.
Please suggest us how to overcome this error.
Thanks in advance.
Regards,
VijayHi Vijay,
are you using business document service to upload the file? There are BAPIs available to save and read the business documents. we used the same concept in our WDA to save and read the attachements to equipment master ie use can see the attachment in IE03 created via WD application and from another WDA, user can read it.
provide more info about ur application.
Thanks,
Chandra -
XML document convert into String and Insert into Database
Hello all,
In the FIle to File Scenario I want to send the data to the Reciever System in xml Document and convert into String and insert into Database.
Please can you tell me exact way how to send it.
Thanks & Regards,
RajHI,
As per my understanding your scenario is File to file where you will get output fiel in XML format.
Now that XMl payload need to be passed as single string in the database via XI.
You cauld do this but you need to imply some manipulations such as
With the help of standard API you need to concatenate the XML tags and create the structre along with the data.
For e.g. in your outpuf file the XML structre contain data as
<field1>ABCD</field1>
Then in mapping
The source field will be mappeda s concat(<field1>) + value of Source field "ABCD" + concat(</field1>) to the target field.
This is the way that you could achive the requirments else there is no direct way avaialble for it.
thanks
Swarup -
Which Bapi is available for uploading Customer Invoice and Payments in SAP
Dear Friends.
I want to upload Customer Invoices and Incoming Payments in the System.
Currently i have written a BDC-Session Program to Upload this data.
I have took the recording of tcode f-22 for Invoices, f-27 for credit memo and f-28 for payments and developed the required BDC program.
Its working fine.
Since the Volume of the data is huge .. ie around 50,000 daily, it takes too much time.
Also i am not able to have a proper error log.
I would like to know from you, whether there is any bapi available to upload this data (invoices,credit memo and payments).
OR is there any other faster and proper error log maintaining scenario available.
I appreciate for all your helps and informations.
Thanks
Kuna.Hi,
could u please send me the f-28 upload program.
Thanks in advance.
Regards
suni -
Pull the data from legacy System into report and display with SAP data
Hi Friends,
My requirement is-
Create report by processing data from SAP tables and prepare output.And Before displaying the output, I have to pull the data from non-sap system which is readymade (It will come as flat file with similar fields as Report structure has) and finally display the records from both SAP and Legacy System by filtering duplicates.Steps:-
Define the file path on selection screen:-
Selection screen data
select-options (s_)
parameters (p_)
radio buttons (r_)
checkboxes (x_)
pushbuttons (b_)
SELECTION-SCREEN BEGIN OF BLOCK block1 WITH FRAME TITLE text-f01.
parameter: p_file type text_512 obligatory.
Start-of-selection.
data : l_fname type string. " File Name
l_fname = p_file .
call function 'GUI_UPLOAD'
exporting
filename = l_fname
filetype = 'ASC'
has_field_separator = '#'
tables
data_tab = lt_data
exceptions
file_open_error = 1
file_read_error = 2
no_batch = 3
gui_refuse_filetransfer = 4
invalid_type = 5
no_authority = 6
unknown_error = 7
bad_data_format = 8
header_not_allowed = 9
separator_not_allowed = 10
header_too_long = 11
unknown_dp_error = 12
access_denied = 13
dp_out_of_memory = 14
disk_full = 15
dp_timeout = 16
others = 17.
if sy-subrc <> 0.
message e000 with 'Unable to upload file from the PC'(t13).
endif.
lt_data is of same structure as the fields in the file.
For filtering duplicates:-
delete adjacent duplicates from lt_data.
Now display the records using either ALV or using write statements.
You can display the records in any of the way you want. -
To upload a RTF and a PDF file to SAP R/3 and print the same through SAP
Hi,
I have a requirement to upload a PDF file and a RTF file to SAP R/3 and print the same.
I wrote the following code for uploading a RTF file to SAP R/3 and print the same. However, the problem is , the formatting present in the RTF document( bold/italics..etc) is not being reflected when I do the 'print-preview' after the executing the code below :
report z_test_upload .
data: begin of itab occurs 0,
rec type string,
end of itab.
data: options like itcpo.
data: filename type string,
count type i.
data: filetype(10) type c value 'ASC'.
DATA: HEADER LIKE THEAD OCCURS 0 WITH HEADER LINE.
DATA: NEWHEADER LIKE THEAD OCCURS 0 WITH HEADER LINE.
DATA: ITFLINE LIKE TLINE OCCURS 0 WITH HEADER LINE.
DATA: RTFLINE LIKE HELP_STFA OCCURS 0 WITH HEADER LINE.
DATA: string_len TYPE i,
n1 TYPE i.
selection-screen begin of block b1.
parameter: p_file1(128) default 'C:\test_itf.rtf'.
selection-screen end of block b1.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_file1.
CALL FUNCTION 'F4_FILENAME'
IMPORTING
file_name = p_file1.
start-of-selection.
move p_file1 to filename.
call function 'GUI_UPLOAD'
EXPORTING
filename = filename
filetype = filetype
TABLES
data_tab = itab
EXCEPTIONS
file_open_error = 1
file_read_error = 2
no_batch = 3
gui_refuse_filetransfer = 4
invalid_type = 5
no_authority = 6
unknown_error = 7
bad_data_format = 8
header_not_allowed = 9
separator_not_allowed = 10
header_too_long = 11
unknown_dp_error = 12
access_denied = 13
dp_out_of_memory = 14
disk_full = 15
dp_timeout = 16
others = 17.
if sy-subrc <> 0.
message id sy-msgid type sy-msgty number sy-msgno
with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
endif.
loop at itab.
string_len = strlen( itab-rec ).
n1 = string_len DIV 134.
ADD 1 TO n1.
DO n1 TIMES.
rtfline-line = itab-rec.
APPEND rtfline.
SHIFT itab-rec BY 134 PLACES.
ENDDO.
endloop.
HEADER-TDSTYLE = 'S_DOCUS1'.
HEADER-TDFORM = 'S_DOCU_SHOW'.
header-tdspras = 'E'.
CALL FUNCTION 'CONVERT_TEXT'
EXPORTING
CODEPAGE = '0000'
DIRECTION = 'IMPORT'
FORMAT_TYPE = 'RTF'
FORMATWIDTH = 72
HEADER = header
SSHEET = 'WINHELP.DOT'
WITH_TAB = 'X'
WORD_LANGU = SY-LANGU
TABLETYPE = 'ASC'
TAB_SUBSTITUTE = 'X09 '
LF_SUBSTITUTE = ' '
REPLACE_SYMBOLS = 'X'
REPLACE_SAPCHARS = 'X'
MASK_BRACKETS = 'X'
IMPORTING
NEWHEADER = NEWHEADER
WITH_TAB_E =
FORMATWIDTH_E =
TABLES
FOREIGN = RTFLINE
ITF_LINES = ITFLINE.
LINKS_TO_CONVERT =
if sy-subrc <> 0.
endif.
CALL FUNCTION 'PRINT_TEXT_ITF'
EXPORTING
HEADER = newheader
OPTIONS = options
IMPORTING
RESULT =
TABLES
LINES = itfline.
if sy-subrc <> 0.
endif.
Any hints or suggestions to solve this problem will be highly appreciated.
Thanks,
AvraHi Vishwas,
Check out the thread [Efficient way of saving documents uploaded|Re: Efficient way of saving documents uploaded by users; and check the blog by Raja Thangamani.
Also check the thread [Export Images through Function Modules |Export Images through Function Modules;.
Hope it helps you. -
Upload interactive form and access field values in WD component
Hi Experts,
I want to upload a prefilled interactive adobe form in my webdynpro component and then I want to read the values filled in the form in my webdynpro component.
I don't want to display the interactive form in the WD component. Just need to read the values.
Please let me know how can I do it.
Warm regards,
Sushant SinghYou can use the fileupload and filedownload uielements.
Check these links:
[File Upload|http://help.sap.com/saphelp_nw70ehp1/helpdata/en/b3/be7941601b1d09e10000000a155106/content.htm]
[File Download|http://help.sap.com/saphelp_nw70ehp1/helpdata/en/09/a5884121a41c09e10000000a155106/content.htm]
When you upload a file and save in SAP, are you saving it as xstring.
If yes follow these steps for filedownload.
Follow these steps for file download:
1 Create FileDownload uielement in your View
2.Create an Attribute of type xstring.
3.Bind this attribute to the data property of your Filedownload uielement.
4. during fileuplaod as you are saving the document in xstring format, fetch the same from your database table and pass the value to filedownload i.e set the attribute bound to data property of filedownload uielement with the xstring content. -
i have a 58 min pro res hq file that is a .mov. it is in a folder on my hdd. i'm trying to syn rushes by logging and transferring clips from this file but i cannot bring the said file into log and transfer. final cut putsup a window that tells me the file is in an unsupported format. and to bring in a file with a supported pathway. this i do not understand. any simple explanation as to what i'm missing?
Thanks meg. I'm trying not to have to sync all the rushes in a timeline. All rushes are in the one 58 min prores file. I wanted to, I guess, log and capture the rushes as clips that I logg in the log and transfer winnow and that it would then log and sort out the material as proxy files. I'm guessing I'm just being lazy or it can't be done. Thanks for the reply but I was looking for a differentbway round than a straight import of the whole file.
M -
Log and transfer will not see contents in p2 folders
This just started happening. Before log and transfer was working great now it won't see
any of the video shot to p2 cards in most of my folders. Every now and then it recognizes and imports actual images into Log and transfer but not from the folders I need. This is really becoming a hassle I now have to go to my slower computer with a older version of final cut 5.04 and transfer using the import function (which works fine) is there any reason why log and transfer won't recognize theses files?I just started having this problem on my laptop. And it has nothing to do with Noise Industries, because I've never had it installed on my laptop.
Same thing, though, with AVCHD files. I shoot them, copy the entire card to an external drive, then L&T from there. Just stopped working. Even cards I've transferred in the past won't load into the L&T window anymore.
Reinstalled software last night and was working again. Came downstairs this morning to start in on another project, and no L&T anymore.
No new software installed or upgraded, it just stopped working. -
hi, just shot with ex-1. all stuff from the sxs card now on external hard drive. i downloaded the XDCAM transfer 2.12, rebooted and yet when i go into log and transfer and navigate to the folder, it says unsupported media. any ideas??? thanks
Don't know. I have been using XDCam transfer ever since we switched to XDCam and EX cameras.
That is the way it works for me. XDCam Transfer has all the functionality of Log and Transfer, you can trim clips and rename them, etc. prior to ingest. The native EX and XDCam are not directly supported in FCP. You need to have the EX files into a format that is supported by FCP, and XDCam transfer does that.
It works well and fairly quickly.
MtD -
Crashes Upon Log and Transfer no Perian on system
That's basically my issue, trying to import AVHCD. I cannot locate any "Perian" anywhere on the system. I deleted preferences as it still crashes, it had worked fine previously but randomly is not. Any help would be appreciated.
The only thing that has changed is that it crashes. I go into Log and Transfer, and sometimes once in it crashes before I can do anything else, and others when I select a custom path, the camera doesn't come up immediately anymore and the external hard drive we copied the SD files from the camera also results in it crashing. None of these were changed either.
-
Does allowing adobe flash player plug in on safari give access to websites the ability to upload and transfer documents and files(on the computer) without permission? Perhaps to their online server or somewhere where they designated them to transfer to?
It depends a bit on which version of Captivate you used to develop your modules and also which version of Flash Player you targeted when publishing your modules from Captivate. Say for example you use Captivate 5 and publish to Flash Player 10. Then your end user would need to have Flash Player 10 on their computer. It shouldn't matter if their version is 10.0.0 or 10.1.0 or 10.1.3 - just as long as it's a 10. If they only have Flash Player 9 then they will need to upgrade.
The "Access to Adobe.com is restricted" is most likely because the HTML that launches the Captivate SWF sees that you have targeted FP10 and the user only have FP9. Then it tries to direct a call to Adobe in order to present an "Upgrade to latest version of Flash" dialog for the user. This traffic is most likely denied by your IT department.
The first step is to find out which version of Flash Player is the most prevalent in your organization. If it is Flash Player 9 then simply select that when publishing from Captivate 5. If Flash Player 8 is the most used in your organization and you have CP5 or CP5.5 then you are in big trouble since FP8 is not supported from CP5 and CP5.5.
/Michael
www.cpguru.com - Adobe Captivate Widgets, Tutorials, Tips & Tricks and much more.. -
All the cd's I have bought over the years, have all been uploaded into iTunes on my Windows PC. I have tried just copying my iTunes folder across to my new iMac, but it doesn't recognise all of the music (but it does recognise some?). Can someone please tell me the best way to transfer my iTunes library from my PC to my iMac?
Thanks, CarolineCopy the entire /My Music/iTunes/ folder from your PC to /Music/ on your Mac.
-
Upload of Campaign and Leads from flat file into SAP CRM system
Hi Gurus,
We need to upload Campaign and Leads from our legacy systems to SAP CRM systems. The source data will be available in the form of flat files (tab delimited)
Please let me know the possible ways of doing this.
Reward points are assured.
Thanks in advance.Hi
you can use external list management functionality in CRM 5.0 useing the flat file tab delimited you can upload the contacts and create business partners followed by lead transaction types with business partners created and also external list management will allow you to create target groups for executing the campaigns in SAP CRM
please do reward points if helpful
regards
Dinaker vikas -
Data transfer from sap r/3 into excel sheet for mi01
hi gurus,
as i am a xi consultant i got requirement to write a program for data transfer from sap r/3 into excel sheet for MI01.can any body help me by giving sample code or example for this requirement.please help me.Hi Rohit,
This is an upload program and it has used both function modules to upload from an excel to R3 and to download from R3 onto excel.
GUI_UPLOAD
GUI_DOWNLOAD
are the function modules used.
Hope this helps,
*Output: Downloads error records onto presentation server,
* Displays report with number of success and error records
REPORT ZMCG047CONTR NO STANDARD PAGE HEADING
LINE-SIZE 255
MESSAGE-ID ZM.
*& Table declarations
TABLES : T001W, "Plants/Branches
T024E, "Purchasing Organizations
T001. "Company Codes
* TYPE-POOLS DECLARATION
TYPE-POOLS : SLIS.
* Types Declaration *
TYPES: BEGIN OF T_RECORD, "record storing contract info
LIFNR(010), "Vendor Number
EVART(004), "Agreement Type
EKORG(004), "Purchasing Organization
EKGRP(003), "Purchasing Group
WERKS(004), "Plant
LGORT(004), "Storage Location
KDATB(010), "Valid start Date
KDATE(010), "Valid End Date
ZTERM(004), "Payment Terms
KTWRT(020), "Target Value
EPSTP(001), "Item Category
EMATN(018), "Material Number
KTMNG(017), "Target Quantity
NETPR(014), "Net Price
PEINH(006), "Net Price Unit
BPRME(003), "Net Price Order Price Unit
IDNLF(035), "Vendor Material number
WEBRE(001), "GR Based-IV
MEPRF(001), "Pricing Date Category
LTEX1(040), "Info Text
DATAB(010), "Valid From
DATBI(010), "Valid To
KSCHL(004), "Condition Type
KBETR(016), "Condition Rate if scale is not given
KONWA(005), "Currency
KPEIN(005), "Condition Pricing Unit
KMEIN(003), "Condition Unit of Measure
KSTBM(019), "Scale
KBETR_01(016), "Scale Rate
DEL_FLAG, "Delete Flag Indicator
ERR_MSG(100), "Error Message
END OF T_RECORD,
BEGIN OF T_ERR_RECORD, "to have error records stored
LIFNR(010), "Vendor Number
EVART(004), "Agreement Type
EKORG(004), "Purchasing Organization
EKGRP(003), "Purchasing Group
WERKS(004), "Plant
LGORT(004), "Storage Location
KDATB(010), "Valid start Date
KDATE(010), "Valid End Date
ZTERM(004), "Payment Terms
KTWRT(020), "Target Value
EPSTP(001), "Item Category
EMATN(018), "Material Number
KTMNG(017), "Target Quantity
NETPR(014), "Net Price
PEINH(006), "Net Price Unit
BPRME(003), "Net Price Order Price Unit
IDNLF(035), "Vendor Material number
WEBRE(001), "GR Based-IV
MEPRF(001), "Pricing Date Category
LTEX1(040), "Info Text
DATAB(010), "Valid From
DATBI(010), "Valid To
KSCHL(004), "Condition Type
KBETR(016), "Condition Rate if scale is not given
KONWA(005), "Currency
KPEIN(005), "Condition Pricing Unit
KMEIN(003), "Condition Unit of Measure
KSTBM(019), "Scale
KBETR_01(016), "Scale Rate
DEL_FLAG, "Delete Flag Indicator
ERR_MSG(100), "Error Message
END OF T_ERR_RECORD,
BEGIN OF T_LOEKZ, "To have deletion indicators for materials
LOEKZ(001), "Deletion indicator in purchasing document
EMATN(018), "Material Number
WERKS(004), "Plant
LGORT(004), "Storage Location
BSTYP(001), "Purchasing document category
END OF T_LOEKZ,
BEGIN OF T_MATNR, " Type definition to store details of materials
MATNR(018), "Material Number
END OF T_MATNR,
BEGIN OF T_T001, " Type definition for company codes
BUKRS(004), " Company Code
END OF T_T001,
BEGIN OF T_ZMVXREF, "Cross-Reference table type
D_ALTKN(10), "Legacy Vendor Number
D_BUKRS(4), "Legacy Company Code
M_ALTKN(10), "SAP Company Code
END OF T_ZMVXREF,
BEGIN OF T_LFA1, "Master data of vendors
LIFNR(10), "Vendor Number
END OF T_LFA1,
* Type Declaration for T024E (Company Codes)
BEGIN OF T_T024E,
EKORG LIKE T024E-EKORG, "Purchasing organization
BUKRS LIKE T024E-BUKRS, "Company Code
END OF T_T024E,
* Type Declaration for t001w (Plant)
BEGIN OF T_T001W,
WERKS LIKE T001W-WERKS, "Plant
END OF T_T001W,
* Type Declatation for String Line
BEGIN OF T_STR1, "#EC NEEDED
SLINE(6000) TYPE C,
END OF T_STR1.
TYPES: BEGIN OF T_BDCDATA. "BDC Data
INCLUDE STRUCTURE BDCDATA.
TYPES: END OF T_BDCDATA.
* Internal Tables Declaration *
DATA:
* Internal table to store input file data
I_RECORD TYPE STANDARD TABLE OF T_RECORD INITIAL SIZE 0,
* Internal table to capture errors
I_ERR_REC TYPE STANDARD TABLE OF T_ERR_RECORD INITIAL SIZE 0,
* Internal table to check for deletion indicators
I_LOEKZ TYPE STANDARD TABLE OF T_LOEKZ INITIAL SIZE 0,
* Internal table to check for material numbers
I_MATNR TYPE STANDARD TABLE OF T_MATNR INITIAL SIZE 0,
* Internal table used for storing Cross-Reference data of Vendor
I_ZMVXREF TYPE STANDARD TABLE OF T_ZMVXREF INITIAL SIZE 0,
* Internal table for holding Vendor Numbers from Master table
I_LFA1 TYPE STANDARD TABLE OF T_LFA1 INITIAL SIZE 0,
* Internal table for holding Purchase Org and Company Codes
I_T024E TYPE STANDARD TABLE OF T_T024E INITIAL SIZE 0,
* Internal table for holding Plants
I_T001W TYPE STANDARD TABLE OF T_T001W INITIAL SIZE 0,
* Internal table for storing a list of Company Codes
I_T001 TYPE STANDARD TABLE OF T_T001 INITIAL SIZE 0,
* Internal table used for ALV Reporting
I_FIELDCAT TYPE SLIS_T_FIELDCAT_ALV,
* Internal table used for holding List Header
I_LISTHEADER TYPE SLIS_T_LISTHEADER, "EC NEEDED
* Internal table to hold ALV Event
I_ALV_EVENT TYPE SLIS_T_EVENT,
* Internal table to hold Sort Info for ALV Report
I_SORT TYPE SLIS_T_SORTINFO_ALV,
* Internal table for BDC Data
I_BDCDATA TYPE STANDARD TABLE OF T_BDCDATA INITIAL SIZE 0,
* Internal table for messages
I_MESSTAB TYPE TABLE OF BDCMSGCOLL,
* Internal table for String line
I_STR1 TYPE STANDARD TABLE OF T_STR1 INITIAL SIZE 0.
* Work Area Declaration *
DATA:
* Work Area to hold data for the Open Contract
WA_RECORD TYPE T_RECORD,
* Work Area to hold previous record data
WA_RECORDPREV TYPE T_RECORD,
* Work Area to hold errors
WA_ERR_REC TYPE T_ERR_RECORD,
* Work Area to hold the Deletion Indicator of materials
WA_LOEKZ TYPE T_LOEKZ,
* Work Area to hold Material numbers of required materials
WA_MATNR TYPE T_MATNR, "EC NEEDED
* Work Area to hold errors occured while performing BDC
WA_MESSTAB TYPE BDCMSGCOLL,
* Work Area to hold field catalog for ALV Reports
WA_FIELDCAT TYPE SLIS_FIELDCAT_ALV,
* Work Area to hold list header data for ALV reports
WA_LISTHEADER TYPE SLIS_LISTHEADER,
* Work Area to hold ALV Event
WA_ALV_EVENT LIKE LINE OF I_ALV_EVENT, "EC NEEDED
* Work Area to hold Layout of ALV Report
WA_LAYOUT TYPE SLIS_LAYOUT_ALV,
* Work Area to hold Cross-Reference data of Vendor
WA_ZMVXREF TYPE T_ZMVXREF,
* Work Area to hold Vendor Numbers from Master table
WA_LFA1 TYPE T_LFA1, "EC NEEDED
* Work Area to hold Purchase Org and Company Codes
WA_T024E TYPE T_T024E,
* Work Area to hold Company Codes
WA_T001 TYPE T_T001,
* Work Area to hold Plants
WA_T001W TYPE T_T001W,
* Work Area to hold Sort Info for ALV Report
WA_SORT TYPE SLIS_SORTINFO_ALV,
* Work Area to hold BDC Data
WA_BDCDATA TYPE T_BDCDATA,
* Work Area for String line
WA_STR1 TYPE T_STR1.
* Variables Declaration *
DATA: V_ERRMSG(500), "To temporarily store the error message
V_CONV_DATE(10) TYPE C, "To capture the converted date format
V_DATE LIKE SY-DATUM,
V_REPID LIKE SY-REPID, "holds report id
V_CROSS_REFERENCE_ERROR TYPE I, " cross-reference error
V_INPUTERROR_FLAG VALUE '', " input error status
V_FILENAME TYPE STRING, " File Name
VEN_FLAG(1), " at new status
MAT_FLAG(1), " at new status
V_IND(2) TYPE N, " index of table control
V_IND2(2) TYPE N, " index of table control
V_IND3(2) TYPE N, " index of table control
V_EVRTP1(20),
V_EPSTP1(20),
V_EMATN1(20),
V_KTMNG1(20),
V_NETPR1(20),
V_PEINH1(20),
V_BPRME1(20),
V_TCSELFLAG1(20),
V_KSCHL2(20),
V_KBETR2(20),
V_KONWA2(20),
V_KPEIN2(20),
V_KMEIN2(20),
V_SELKZ2(20),
V_KBETR3(20),
V_KSTBM3(20),
V_LINE TYPE I,
V_STR TYPE X VALUE '09',
V_EXIST TYPE C,
V_EXIST1 TYPE C,
V_ISDIR TYPE C,
V_ISDIR1 TYPE C.
* Constants Declaration *
CONSTANTS: C_TCODE(5) VALUE 'ME31K', "Trx code - Open Contract Creation
C_TRUE VALUE 'X', " Del_Flag indicator
C_LOEKZ_MARKED VALUE 'X', "Deletion indicator for material
C_INPUTERROR_FLAG_YES VALUE 'X', "Input File Indicator
C_VEN_ERR1 VALUE 1, "Error Indicator
C_16(2) VALUE '16',
C_VEN_ERR2 VALUE 2, "Error Indicator
C_VEN_ERR3 VALUE 3, "Error Indicator
C_VEN_SUCS VALUE 0, "Success Indicator
C_SUCCESS LIKE SY-SUBRC VALUE '0',
C_STRUE VALUE 'S', "Del_flag for SAP Errors
C_YTRUE VALUE 'Y', "Del_flag for Success Records
C_MSGTYP_E VALUE 'E', "holds error message type
C_MSGTYP_S VALUE 'S', "holds success message type
C_BSTYP VALUE 'K', "Purchasing Document type is Contract
C_BACKGROUND VALUE 'N', "Background mode
C_FOREGROUND VALUE 'A', "All Screen mode
C_ERRORS VALUE 'E', "Error screen mode
C_WK(2) VALUE 'WK'. "Value Contract
* Selection Screen *
SELECTION-SCREEN BEGIN OF BLOCK B2 WITH FRAME TITLE TEXT-033.
SELECTION-SCREEN SKIP.
SELECT-OPTIONS:
* Plant
S_WERKS FOR T001W-WERKS OBLIGATORY,
* Purchase Organization
S_EKORG FOR T024E-EKORG OBLIGATORY.
* Company Code
PARAMETER P_BUKRS LIKE T001-BUKRS OBLIGATORY.
SELECTION-SCREEN SKIP.
SELECTION-SCREEN ULINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN POSITION 3.
PARAMETER RB_SERVE RADIOBUTTON GROUP RBX DEFAULT 'X' USER-COMMAND U1.
SELECTION-SCREEN COMMENT 6(19) TEXT-036.
SELECTION-SCREEN POSITION 37.
PARAMETER RB_LOCAL RADIOBUTTON GROUP RBX.
SELECTION-SCREEN COMMENT 40(13) TEXT-035.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN SKIP.
PARAMETERS:
* Parameter holding Input File name
P_FILE LIKE RLGRAP-FILENAME
OBLIGATORY
LOWER CASE
DEFAULT 'C:\'
MODIF ID G1,
P_FILE1 LIKE RLGRAP-FILENAME
OBLIGATORY
LOWER CASE
DEFAULT '/celestica/interface/corp/in/work/'
MODIF ID G2,
* Parameter specifying Mode of calling the Transaction.
P_MODE DEFAULT 'N' OBLIGATORY,
* Check box used to test the input file.
P_TEST AS CHECKBOX DEFAULT 'X',
* Parameter holding Filename for holding Input File Errors
P_IPERR LIKE RLGRAP-FILENAME
OBLIGATORY
LOWER CASE
DEFAULT 'C:\'
MODIF ID G1,
P_IPERR1 LIKE RLGRAP-FILENAME
OBLIGATORY
LOWER CASE
DEFAULT '/celestica/interface/corp/in/work/047_Err.txt'
MODIF ID G2.
SELECTION-SCREEN END OF BLOCK B2.
* AT Selection Screen Events *
* Loop the screen to activate relative paths
AT SELECTION-SCREEN OUTPUT.
LOOP AT SCREEN.
IF RB_SERVE = C_TRUE AND SCREEN-GROUP1 = 'G1'.
SCREEN-OUTPUT = 0.
SCREEN-ACTIVE = 0.
SCREEN-INPUT = 0.
ELSEIF RB_LOCAL = C_TRUE AND SCREEN-GROUP1 = 'G2'.
SCREEN-OUTPUT = 0.
SCREEN-ACTIVE = 0.
SCREEN-INPUT = 0.
ENDIF.
MODIFY SCREEN.
ENDLOOP.
AT SELECTION-SCREEN ON BLOCK B2.
* Checking Access Authorization for the user
CALL FUNCTION 'ZU_DATA_ACCESS_AUTH_CHECK'
EXPORTING
ACTVT = C_16
P_BUKRS = P_BUKRS
TABLES
S_WERKS = S_WERKS
S_EKORG = S_EKORG
EXCEPTIONS
BUKRS_FAILED = 1
VKORG_FAILED = 2
VTWEG_FAILED = 3
EKORG_FAILED = 4
WERKS_FAILED = 5
LGNUM_FAILED = 6
OTHERS = 7.
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
AT SELECTION-SCREEN ON P_BUKRS.
IF NOT P_BUKRS IS INITIAL.
SELECT SINGLE BUKRS INTO T001
FROM T001
WHERE BUKRS EQ P_BUKRS.
IF SY-SUBRC NE 0.
MESSAGE I000 WITH TEXT-089.
STOP.
ENDIF.
ENDIF.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR P_FILE.
* Search Help to select Input File path.
PERFORM GET_FILE_NAME USING P_FILE.
* Check for the existence of the file.
IF RB_LOCAL EQ C_TRUE.
CALL FUNCTION 'TMP_GUI_GET_FILE_EXIST'
EXPORTING
FNAME = P_FILE
IMPORTING
EXIST = V_EXIST
ISDIR = V_ISDIR
EXCEPTIONS
FILEINFO_ERROR = 1
OTHERS = 2.
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
IF V_ISDIR IS INITIAL.
IF V_EXIST IS INITIAL.
MESSAGE I000 WITH TEXT-018.
STOP.
ENDIF.
ELSEIF V_ISDIR EQ C_TRUE.
MESSAGE I000 WITH TEXT-068.
STOP.
ENDIF.
ENDIF.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR P_IPERR.
* Search Help to select Input Error File path.
PERFORM GET_FILE_NAME USING P_IPERR.
AT SELECTION-SCREEN.
* Validate Transaction Mode
IF P_MODE <> C_BACKGROUND AND
P_MODE <> C_FOREGROUND AND
P_MODE <> C_ERRORS.
MESSAGE I000 WITH TEXT-034.
STOP.
ENDIF.
START-OF-SELECTION.
* Get the Input File Data
V_FILENAME = P_FILE.
PERFORM UPLOAD_FLATFILE_DATA TABLES I_RECORD
USING V_FILENAME.
* Sorting the data by all fields
SORT I_RECORD.
* Ensuring the padding of the empty spaces before the vendor No
CLEAR WA_RECORD.
LOOP AT I_RECORD INTO WA_RECORD.
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
EXPORTING
INPUT = WA_RECORD-LIFNR
IMPORTING
OUTPUT = WA_RECORD-LIFNR.
MODIFY I_RECORD FROM WA_RECORD
INDEX SY-TABIX
TRANSPORTING LIFNR.
CLEAR WA_RECORD.
ENDLOOP.
* Input file validation
PERFORM VALIDATE_FLATFILE_DATA.
IF P_TEST = C_TRUE.
IF I_ERR_REC[] IS INITIAL.
MESSAGE I000 WITH TEXT-032.
STOP.
ELSE.
* Display all the error records at the input level.
PERFORM DISPLAY_INPERR_RECORDS.
* Download Error File
PERFORM DOWNLOAD_ERROR_FILE.
ENDIF.
ELSE.
* Build BDC Data
PERFORM BUILD_BDC_DATA.
* Download Error File
PERFORM DOWNLOAD_ERROR_FILE.
* Display the status report.
PERFORM DISPLAY_PROCESSED_RECORDS.
ENDIF.
END-OF-SELECTION.
REFRESH: I_RECORD,
I_ERR_REC,
I_LOEKZ,
I_MATNR,
I_ZMVXREF,
I_LFA1,
I_T024E,
I_FIELDCAT,
I_LISTHEADER,
I_ALV_EVENT,
I_SORT,
I_BDCDATA,
I_MESSTAB,
I_STR1.
FREE: I_RECORD,
I_ERR_REC,
I_LOEKZ,
I_MATNR,
I_ZMVXREF,
I_LFA1,
I_T024E,
I_FIELDCAT,
I_LISTHEADER,
I_ALV_EVENT,
I_SORT,
I_BDCDATA,
I_MESSTAB,
I_STR1.
*& Form GET_file_name
* Fetches the file and path from the presentation system
* --> p1 Path along with the file name
FORM GET_FILE_NAME USING L_FILE LIKE RLGRAP-FILENAME.
CALL FUNCTION 'WS_FILENAME_GET'
EXPORTING
MASK = ',*.TXT,*.txt.'
MODE = 'O'
TITLE = TEXT-011
IMPORTING
FILENAME = L_FILE
EXCEPTIONS
INV_WINSYS = 1
NO_BATCH = 2
SELECTION_CANCEL = 3
SELECTION_ERROR = 4
OTHERS = 5.
CASE SY-SUBRC.
WHEN 1.
MESSAGE I000 WITH TEXT-084.
STOP.
WHEN 2.
MESSAGE I000 WITH TEXT-085.
STOP.
WHEN 3.
MESSAGE I000 WITH TEXT-086.
STOP.
WHEN 4.
MESSAGE I000 WITH TEXT-087.
STOP.
ENDCASE.
ENDFORM. " GET_file_name
*& Form upload_flatfile_data
* Uploading data from Flat File
FORM UPLOAD_FLATFILE_DATA
TABLES I_L_RECORD STRUCTURE WA_RECORD
USING L_FILENAME TYPE STRING.
DATA WA_L_RECORD TYPE T_RECORD.
* Upload the Flat file data
IF RB_LOCAL EQ C_TRUE. "File is on the Local System
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
FILENAME = L_FILENAME
FILETYPE = 'ASC'
HAS_FIELD_SEPARATOR = 'X'
TABLES
DATA_TAB = I_L_RECORD
EXCEPTIONS
FILE_OPEN_ERROR = 1
FILE_READ_ERROR = 2
NO_BATCH = 3
GUI_REFUSE_FILETRANSFER = 4
INVALID_TYPE = 5
NO_AUTHORITY = 6
UNKNOWN_ERROR = 7
BAD_DATA_FORMAT = 8
HEADER_NOT_ALLOWED = 9
SEPARATOR_NOT_ALLOWED = 10
HEADER_TOO_LONG = 11
UNKNOWN_DP_ERROR = 12
ACCESS_DENIED = 13
DP_OUT_OF_MEMORY = 14
DISK_FULL = 15
DP_TIMEOUT = 16
OTHERS = 17.
CASE SY-SUBRC.
WHEN 0.
DESCRIBE TABLE I_L_RECORD LINES V_LINE.
IF V_LINE EQ 0.
MESSAGE I000 WITH TEXT-065.
STOP.
ENDIF.
WHEN 1.
MESSAGE I000 WITH TEXT-068.
STOP.
WHEN 2.
MESSAGE I000 WITH TEXT-069.
STOP.
WHEN 3.
MESSAGE I000 WITH TEXT-070.
STOP.
WHEN 4.
MESSAGE I000 WITH TEXT-071.
STOP.
WHEN 5.
MESSAGE I000 WITH TEXT-072.
STOP.
WHEN 6.
MESSAGE I000 WITH TEXT-073.
STOP.
WHEN 7.
MESSAGE I000 WITH TEXT-074.
STOP.
WHEN 8.
MESSAGE I000 WITH TEXT-075.
STOP.
WHEN 9.
MESSAGE I000 WITH TEXT-076.
STOP.
WHEN 10.
MESSAGE I000 WITH TEXT-077.
STOP.
WHEN 11.
MESSAGE I000 WITH TEXT-078.
STOP.
WHEN 12.
MESSAGE I000 WITH TEXT-079.
STOP.
WHEN 13.
MESSAGE I000 WITH TEXT-080.
STOP.
WHEN 14.
MESSAGE I000 WITH TEXT-081.
STOP.
WHEN 15.
MESSAGE I000 WITH TEXT-082.
STOP.
WHEN 16.
MESSAGE I000 WITH TEXT-083.
STOP.
ENDCASE.
CLEAR V_LINE.
ELSEIF RB_SERVE EQ C_TRUE. "File is on the Application Server
P_MODE = C_BACKGROUND.
OPEN DATASET P_FILE1 FOR INPUT IN TEXT MODE.
CHECK SY-SUBRC EQ C_SUCCESS.
CLEAR WA_STR1.
DO.
READ DATASET P_FILE1 INTO WA_STR1.
IF SY-SUBRC <> 0. " NE SUCCESS.
EXIT.
ELSEIF SY-SUBRC EQ C_SUCCESS.
APPEND WA_STR1 TO I_STR1.
CLEAR WA_STR1.
ENDIF. " ENDIF on SY-SUBRC 0 Check.
ENDDO. " ENDDO
DELETE I_STR1 WHERE SLINE EQ ' '.
DESCRIBE TABLE I_STR1 LINES V_LINE.
IF V_LINE EQ 0.
MESSAGE S000 WITH TEXT-065.
STOP.
ENDIF.
LOOP AT I_STR1 INTO WA_STR1.
CLEAR: WA_L_RECORD.
SPLIT WA_STR1-SLINE AT V_STR
INTO WA_L_RECORD-LIFNR
WA_L_RECORD-EVART
WA_L_RECORD-EKORG
WA_L_RECORD-EKGRP
WA_L_RECORD-WERKS
WA_L_RECORD-LGORT
WA_L_RECORD-KDATB
WA_L_RECORD-KDATE
WA_L_RECORD-ZTERM
WA_L_RECORD-KTWRT
WA_L_RECORD-EPSTP
WA_L_RECORD-EMATN
WA_L_RECORD-KTMNG
WA_L_RECORD-NETPR
WA_L_RECORD-PEINH
WA_L_RECORD-BPRME
WA_L_RECORD-IDNLF
WA_L_RECORD-WEBRE
WA_L_RECORD-MEPRF
WA_L_RECORD-LTEX1
WA_L_RECORD-DATAB
WA_L_RECORD-DATBI
WA_L_RECORD-KSCHL
WA_L_RECORD-KBETR
WA_L_RECORD-KONWA
WA_L_RECORD-KPEIN
WA_L_RECORD-KMEIN
WA_L_RECORD-KSTBM
WA_L_RECORD-KBETR_01
WA_L_RECORD-DEL_FLAG
WA_L_RECORD-ERR_MSG.
APPEND WA_L_RECORD TO I_L_RECORD.
CLEAR: WA_L_RECORD,
WA_STR1.
ENDLOOP.
REFRESH I_STR1.
CLOSE DATASET P_FILE1.
ENDIF.
ENDFORM.
*& Form BDC_DYNPRO
* Data populated into i_bdcdata table for program
FORM BDC_DYNPRO USING PROGRAM DYNPRO.
CLEAR WA_BDCDATA.
WA_BDCDATA-PROGRAM = PROGRAM.
WA_BDCDATA-DYNPRO = DYNPRO.
WA_BDCDATA-DYNBEGIN = C_TRUE.
APPEND WA_BDCDATA TO I_BDCDATA.
ENDFORM.
*& Form BDC_FIELD
* Data populated into i_bdcdata table for fields
FORM BDC_FIELD USING FNAM FVAL.
CLEAR WA_BDCDATA.
WA_BDCDATA-FNAM = FNAM.
WA_BDCDATA-FVAL = FVAL.
APPEND WA_BDCDATA TO I_BDCDATA.
ENDFORM.
*& Form convert_date
* Converting the data from the file format to mm/dd/yyyy format
* <--P_wa_record_kdatb Source Date
* <--p_l_conv_date Target Date
FORM CONVERT_DATE USING L_DATE
L_TAR_DATE.
CONCATENATE L_DATE+0(2)
L_DATE+3(2)
L_DATE+6(4)
INTO L_TAR_DATE.
ENDFORM. " convert_date
*& Form validate_flatfile_data
* Validating the input file
FORM VALIDATE_FLATFILE_DATA.
DATA: L_TODAY LIKE SY-DATUM,
L_STARTDATE_C LIKE SY-DATUM,
L_ENDDATE_C LIKE SY-DATUM,
L_ENDDATE_C1 LIKE SY-DATUM,
L_STARTDATE_C1 LIKE SY-DATUM,
L_STARTDATE(8),
L_ENDDATE(8).
* Fetch indicator for all records on the material, plant & storage
* location combination.
IF NOT I_RECORD[] IS INITIAL.
REFRESH I_LOEKZ.
SELECT EMATN " Material Number
WERKS " Plant
LGORT " Storage Location
BSTYP " Purchasing Document Category
LOEKZ " Deletion indicator
INTO TABLE I_LOEKZ
FROM EKPO
FOR ALL ENTRIES IN I_RECORD
WHERE EMATN = I_RECORD-EMATN
AND WERKS = I_RECORD-WERKS
AND LGORT = I_RECORD-LGORT
AND BSTYP = C_BSTYP
AND LOEKZ = C_LOEKZ_MARKED.
IF SY-SUBRC EQ 0.
SORT I_LOEKZ BY EMATN WERKS LGORT BSTYP LOEKZ.
ENDIF.
* Fetching Plants for all entries in the selection screen
REFRESH I_T001W.
SELECT WERKS "Plant
INTO TABLE I_T001W
FROM T001W
WHERE WERKS IN S_WERKS.
IF SY-SUBRC EQ 0.
SORT I_T001W BY WERKS.
ENDIF.
* Fetching materials for the plants listed in flat file
REFRESH I_MATNR.
SELECT MATNR " Material Number
INTO TABLE I_MATNR
FROM MARC
FOR ALL ENTRIES IN I_RECORD
WHERE WERKS = I_RECORD-WERKS.
IF SY-SUBRC EQ 0.
SORT I_MATNR BY MATNR.
ENDIF.
* Fetching Company Codes for repective Purchase Organizations
REFRESH I_T024E.
SELECT EKORG " Purchase Organization
BUKRS " Company Code
INTO TABLE I_T024E
FROM T024E
WHERE EKORG IN S_EKORG.
IF SY-SUBRC EQ 0.
SORT I_T024E BY EKORG.
ENDIF.
* Fetching SAP Data using Legacy Data.
REFRESH I_ZMVXREF.
SELECT D_ALTKN
D_BUKRS
M_ALTKN
INTO TABLE I_ZMVXREF
FROM ZMVXREF
FOR ALL ENTRIES IN I_RECORD
WHERE D_ALTKN = I_RECORD-LIFNR.
IF SY-SUBRC EQ 0.
SORT I_ZMVXREF BY D_ALTKN D_BUKRS.
ENDIF.
* Fetching Vendors from LFA1
IF NOT I_ZMVXREF[] IS INITIAL.
REFRESH I_LFA1.
SELECT LIFNR
INTO TABLE I_LFA1
FROM LFA1
FOR ALL ENTRIES IN I_ZMVXREF
WHERE LIFNR = I_ZMVXREF-M_ALTKN.
IF SY-SUBRC EQ 0.
SORT I_LFA1 BY LIFNR.
ENDIF.
ENDIF.
* Start Validating the flat file
CLEAR: WA_RECORD,
WA_T024E,
WA_ZMVXREF,
WA_LFA1,
WA_LOEKZ,
WA_MATNR.
LOOP AT I_RECORD INTO WA_RECORD.
L_TODAY = SY-DATUM.
L_STARTDATE = WA_RECORD-KDATB.
L_ENDDATE = WA_RECORD-KDATE.
IF WA_RECORD-DEL_FLAG IS INITIAL.
READ TABLE I_T001W INTO WA_T001W
WITH KEY WERKS = WA_RECORD-WERKS
BINARY SEARCH.
IF SY-SUBRC EQ 0.
* Cross-Reference check performed for the given Vendors
READ TABLE I_T024E INTO WA_T024E
WITH KEY EKORG = WA_RECORD-EKORG
BINARY SEARCH.
IF SY-SUBRC NE 0.
V_CROSS_REFERENCE_ERROR = C_VEN_ERR3.
ELSE.
READ TABLE I_ZMVXREF INTO WA_ZMVXREF
WITH KEY D_ALTKN = WA_RECORD-LIFNR
D_BUKRS = P_BUKRS
BINARY SEARCH.
IF SY-SUBRC EQ 0.
READ TABLE I_LFA1 INTO WA_LFA1
WITH KEY LIFNR = WA_ZMVXREF-M_ALTKN
BINARY SEARCH.
IF SY-SUBRC EQ 0.
V_CROSS_REFERENCE_ERROR = C_VEN_SUCS.
ELSE.
V_CROSS_REFERENCE_ERROR = C_VEN_ERR2.
ENDIF.
ELSE.
V_CROSS_REFERENCE_ERROR = C_VEN_ERR1.
ENDIF.
ENDIF.
* Legacy Vendor could not be mapped
IF V_CROSS_REFERENCE_ERROR EQ C_VEN_ERR1.
V_INPUTERROR_FLAG = C_INPUTERROR_FLAG_YES. "Inp.file err. occurd
WA_RECORD-DEL_FLAG = C_TRUE.
WA_RECORD-ERR_MSG = TEXT-007.
MODIFY I_RECORD FROM WA_RECORD
TRANSPORTING DEL_FLAG
ERR_MSG
WHERE LIFNR = WA_RECORD-LIFNR.
* Legacy Vendor is mapped but the obtained SAP vendor doesn't exist.
ELSEIF V_CROSS_REFERENCE_ERROR EQ C_VEN_ERR2.
* Inp.file err. occurd
V_INPUTERROR_FLAG = C_INPUTERROR_FLAG_YES.
WA_RECORD-DEL_FLAG = C_TRUE.
WA_RECORD-ERR_MSG = TEXT-008.
MODIFY I_RECORD FROM WA_RECORD
TRANSPORTING DEL_FLAG
ERR_MSG
WHERE LIFNR = WA_RECORD-LIFNR.
* Purchase Organization doesn't exist in T024E.
ELSEIF V_CROSS_REFERENCE_ERROR EQ C_VEN_ERR3.
* Inp.file err. occurd
V_INPUTERROR_FLAG = C_INPUTERROR_FLAG_YES.
WA_RECORD-DEL_FLAG = C_TRUE.
WA_RECORD-ERR_MSG = TEXT-014.
MODIFY I_RECORD FROM WA_RECORD
TRANSPORTING DEL_FLAG
ERR_MSG
WHERE EKORG = WA_RECORD-EKORG.
* Vendor is mapped and validated successfully
ELSEIF V_CROSS_REFERENCE_ERROR EQ C_VEN_SUCS.
* Checking for the deletion indicator for that record
CONCATENATE WA_RECORD-KDATB+6(4)
WA_RECORD-KDATB+3(2)
WA_RECORD-KDATB+0(2)
INTO
L_STARTDATE.
MOVE L_STARTDATE TO L_STARTDATE_C.
CONCATENATE WA_RECORD-KDATB+6(4)
WA_RECORD-KDATB+0(2)
WA_RECORD-KDATB+3(2)
INTO
L_STARTDATE_C1.
CONCATENATE WA_RECORD-KDATE+6(4)
WA_RECORD-KDATE+3(2)
WA_RECORD-KDATE+0(2)
INTO
L_ENDDATE.
MOVE L_ENDDATE TO L_ENDDATE_C.
CONCATENATE WA_RECORD-KDATE+6(4)
WA_RECORD-KDATE+0(2)
WA_RECORD-KDATE+3(2)
INTO
L_ENDDATE_C1.
READ TABLE I_LOEKZ INTO WA_LOEKZ WITH KEY
EMATN = WA_RECORD-EMATN
WERKS = WA_RECORD-WERKS
LGORT = WA_RECORD-LGORT
BINARY SEARCH.
IF SY-SUBRC EQ 0.
* Inpfle err.occured
V_INPUTERROR_FLAG = C_INPUTERROR_FLAG_YES.
WA_RECORD-ERR_MSG = TEXT-003.
WA_RECORD-DEL_FLAG = C_TRUE. "marking the record
MODIFY I_RECORD FROM WA_RECORD
TRANSPORTING DEL_FLAG
ERR_MSG
WHERE LIFNR = WA_RECORD-LIFNR
AND EVART = WA_RECORD-EVART
AND EKORG = WA_RECORD-EKORG
AND EKGRP = WA_RECORD-EKGRP
AND WERKS = WA_RECORD-WERKS
AND LGORT = WA_RECORD-LGORT
AND KDATB = WA_RECORD-KDATB
AND KDATE = WA_RECORD-KDATE
AND ZTERM = WA_RECORD-ZTERM
AND KTWRT = WA_RECORD-KTWRT
AND EPSTP = WA_RECORD-EPSTP
AND EMATN = WA_RECORD-EMATN.
* Validating the Purchasing Organization for Blank/Null
ELSEIF WA_RECORD-EKORG IS INITIAL.
* Inpfle err.occured
V_INPUTERROR_FLAG = C_INPUTERROR_FLAG_YES.
WA_RECORD-ERR_MSG = TEXT-010.
WA_RECORD-DEL_FLAG = C_TRUE.
MODIFY I_RECORD FROM WA_RECORD
TRANSPORTING DEL_FLAG
ERR_MSG
WHERE LIFNR = WA_RECORD-LIFNR
AND EVART = WA_RECORD-EVART
AND EKORG = WA_RECORD-EKORG
AND EKGRP = WA_RECORD-EKGRP
AND WERKS = WA_RECORD-WERKS
AND LGORT = WA_RECORD-LGORT
AND KDATB = WA_RECORD-KDATB
AND KDATE = WA_RECORD-KDATE
AND ZTERM = WA_RECORD-ZTERM
AND KTWRT = WA_RECORD-KTWRT
AND EPSTP = WA_RECORD-EPSTP
AND EMATN = WA_RECORD-EMATN.
* Validating the Plant for Blank/Null
ELSEIF WA_RECORD-WERKS IS INITIAL.
* Inpfle err.occured
V_INPUTERROR_FLAG = C_INPUTERROR_FLAG_YES.
WA_RECORD-ERR_MSG = TEXT-039.
WA_RECORD-DEL_FLAG = C_TRUE.
MODIFY I_RECORD FROM WA_RECORD
TRANSPORTING DEL_FLAG
ERR_MSG
WHERE LIFNR = WA_RECORD-LIFNR
AND EVART = WA_RECORD-EVART
AND EKORG = WA_RECORD-EKORG
AND EKGRP = WA_RECORD-EKGRP
AND WERKS = WA_RECORD-WERKS
AND LGORT = WA_RECORD-LGORT
AND KDATB = WA_RECORD-KDATB
AND KDATE = WA_RECORD-KDATE
AND ZTERM = WA_RECORD-ZTERM
AND KTWRT = WA_RECORD-KTWRT
AND EPSTP = WA_RECORD-EPSTP
AND EMATN = WA_RECORD-EMATN.
* Validating the Contract Validity Start Date
ELSEIF L_STARTDATE_C1 GT L_TODAY. "#EC PORTABLE
* Inpfle err.occured
V_INPUTERROR_FLAG = C_INPUTERROR_FLAG_YES.
WA_RECORD-ERR_MSG = TEXT-004.
WA_RECORD-DEL_FLAG = C_TRUE. "marking the record
MODIFY I_RECORD FROM WA_RECORD
TRANSPORTING DEL_FLAG
ERR_MSG
WHERE LIFNR = WA_RECORD-LIFNR
AND EVART = WA_RECORD-EVART
AND EKORG = WA_RECORD-EKORG
AND EKGRP = WA_RECORD-EKGRP
AND WERKS = WA_RECORD-WERKS
AND LGORT = WA_RECORD-LGORT
AND KDATB = WA_RECORD-KDATB.
* Validating the Contract Validity End Date
ELSEIF L_ENDDATE_C1 LE L_TODAY. "#EC PORTABLE
* Inpfle err.ocrd
V_INPUTERROR_FLAG = C_INPUTERROR_FLAG_YES.
WA_RECORD-ERR_MSG = TEXT-005.
WA_RECORD-DEL_FLAG = C_TRUE. "marking the record
MODIFY I_RECORD FROM WA_RECORD
TRANSPORTING DEL_FLAG
ERR_MSG
WHERE LIFNR = WA_RECORD-LIFNR
AND EVART = WA_RECORD-EVART
AND EKORG = WA_RECORD-EKORG
AND EKGRP = WA_RECORD-EKGRP
AND WERKS = WA_RECORD-WERKS
AND LGORT = WA_RECORD-LGORT
AND KDATB = WA_RECORD-KDATB
AND KDATE = WA_RECORD-KDATE.
* Checking for Material under the Plant for Agreement Type 'WK'
ELSEIF WA_RECORD-EVART = C_WK.
READ TABLE I_MATNR INTO WA_MATNR
WITH KEY MATNR = WA_RECORD-EMATN
BINARY SEARCH.
IF SY-SUBRC NE 0.
V_INPUTERROR_FLAG = C_INPUTERROR_FLAG_YES. "Inpfle err.ocrd
WA_RECORD-ERR_MSG = TEXT-006.
WA_RECORD-DEL_FLAG = C_TRUE. "marking the record
MODIFY I_RECORD FROM WA_RECORD
TRANSPORTING DEL_FLAG
ERR_MSG
WHERE LIFNR = WA_RECORD-LIFNR
AND EVART = WA_RECORD-EVART
AND EKORG = WA_RECORD-EKORG
AND EKGRP = WA_RECORD-EKGRP
AND WERKS = WA_RECORD-WERKS
AND LGORT = WA_RECORD-LGORT
AND KDATB = WA_RECORD-KDATB
AND KDATE = WA_RECORD-KDATE
AND ZTERM = WA_RECORD-ZTERM
AND KTWRT = WA_RECORD-KTWRT
AND EPSTP = WA_RECORD-EPSTP
AND EMATN = WA_RECORD-EMATN.
ENDIF.
ENDIF. " checking of deletion indicator
ENDIF. " checking for success of vendor cross reference
ELSE.
V_INPUTERROR_FLAG = C_INPUTERROR_FLAG_YES. "Inpfle err.ocrd
WA_RECORD-ERR_MSG = TEXT-041.
WA_RECORD-DEL_FLAG = C_TRUE. "marking the record
MODIFY I_RECORD FROM WA_RECORD
TRANSPORTING DEL_FLAG
ERR_MSG
WHERE WERKS = WA_RECORD-WERKS.
ENDIF. " Plant checked to selection screen
ENDIF. " the records for which del_flag is initial
CLEAR: WA_RECORD,
WA_T024E,
WA_ZMVXREF,
WA_LFA1,
WA_LOEKZ,
WA_MATNR,
L_TODAY,
L_STARTDATE_C,
L_ENDDATE_C,
L_STARTDATE,
L_ENDDATE.
ENDLOOP.
LOOP AT I_RECORD INTO WA_RECORD.
IF WA_RECORD-DEL_FLAG = C_TRUE.
APPEND WA_RECORD TO I_ERR_REC.
CLEAR WA_RECORD.
ENDIF.
ENDLOOP.
ELSE.
MESSAGE E000 WITH TEXT-013. " no records in the flat file
STOP.
ENDIF.
ENDFORM. " validate_flatfile_data
*& Form DOWNLOAD_ERROR_FILE
* Downloads all records along with the records encountering the
* input file validation error
FORM DOWNLOAD_ERROR_FILE.
DATA L_ISDIR TYPE C.
IF V_INPUTERROR_FLAG = C_INPUTERROR_FLAG_YES.
V_FILENAME = P_IPERR.
* Check for the existence of the file.
IF RB_LOCAL EQ C_TRUE.
CALL FUNCTION 'TMP_GUI_GET_FILE_EXIST'
EXPORTING
FNAME = P_IPERR
IMPORTING
ISDIR = L_ISDIR
EXCEPTIONS
FILEINFO_ERROR = 1
OTHERS = 2.
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
IF L_ISDIR EQ C_TRUE.
MESSAGE I000 WITH TEXT-088.
STOP.
ENDIF.
ENDIF.
IF RB_LOCAL EQ C_TRUE.
* Download the Input Error File.
CALL FUNCTION 'GUI_DOWNLOAD'
EXPORTING
FILENAME = V_FILENAME
FILETYPE = 'ASC'
WRITE_FIELD_SEPARATOR = '#'
TABLES
DATA_TAB = I_ERR_REC
EXCEPTIONS
FILE_WRITE_ERROR = 1
NO_BATCH = 2
GUI_REFUSE_FILETRANSFER = 3
INVALID_TYPE = 4
NO_AUTHORITY = 5
UNKNOWN_ERROR = 6
HEADER_NOT_ALLOWED = 7
SEPARATOR_NOT_ALLOWED = 8
FILESIZE_NOT_ALLOWED = 9
HEADER_TOO_LONG = 10
DP_ERROR_CREATE = 11
DP_ERROR_SEND = 12
DP_ERROR_WRITE = 13
UNKNOWN_DP_ERROR = 14
ACCESS_DENIED = 15
DP_OUT_OF_MEMORY = 16
DISK_FULL = 17
DP_TIMEOUT = 18
FILE_NOT_FOUND = 19
DATAPROVIDER_EXCEPTION = 20
CONTROL_FLUSH_ERROR = 21
OTHERS = 22.
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ELSEIF RB_SERVE EQ C_TRUE.
OPEN DATASET P_IPERR1 FOR OUTPUT IN TEXT MODE.
CHECK SY-SUBRC EQ 0.
CLEAR WA_ERR_REC.
LOOP AT I_ERR_REC INTO WA_ERR_REC.
IF WA_ERR_REC-DEL_FLAG = C_TRUE.
TRANSFER WA_ERR_REC TO P_IPERR1.
ENDIF.
CLEAR WA_ERR_REC.
ENDLOOP.
CLOSE DATASET P_IPERR1.
ENDIF.
ENDIF.
ENDFORM. " DOWNLOAD_ERROR_FILE
*& Form BUILD_BDC_DATA
* Populates BDC for all the fields neccessary for Open Contract Creation
FORM BUILD_BDC_DATA.
DATA: L_MAT_INDEX TYPE I,
L_CON_INDEX TYPE I,
L_SCA_INDEX TYPE I.
CLEAR WA_BDCDATA.
REFRESH: I_BDCDATA,
I_MESSTAB.
* Processing the bdc
CLEAR: WA_RECORD,
WA_RECORDPREV,
VEN_FLAG,
MAT_FLAG.
LOOP AT I_RECORD INTO WA_RECORD.
* Checks for the del_flag of the record.
IF WA_RECORD-DEL_FLAG EQ C_TRUE
OR WA_RECORD-DEL_FLAG EQ C_STRUE.
CLEAR WA_RECORD.
CONTINUE.
ELSE.
IF WA_RECORDPREV-LIFNR NE WA_RECORD-LIFNR
OR WA_RECORDPREV-EVART NE WA_RECORD-EVART
OR WA_RECORDPREV-EKORG NE WA_RECORD-EKORG
OR WA_RECORDPREV-EKGRP NE WA_RECORD-EKGRP
OR WA_RECORDPREV-WERKS NE WA_RECORD-WERKS
OR WA_RECORDPREV-LGORT NE WA_RECORD-LGORT
OR WA_RECORDPREV-KDATB NE WA_RECORD-KDATB
OR WA_RECORDPREV-KDATE NE WA_RECORD-KDATE
OR WA_RECORDPREV-ZTERM NE WA_RECORD-ZTERM
OR WA_RECORDPREV-KTWRT NE WA_RECORD-KTWRT.
PERFORM BDC_DYNPRO USING 'SAPMM06E' '0200'.
PERFORM BDC_FIELD USING 'BDC_CURSOR'
'RM06E-LGORT'.
PERFORM BDC_FIELD USING 'BDC_OKCODE'
'/00'.
* Cross-Reference check performed for the given Vendors
CLEAR WA_T024E.
READ TABLE I_T024E INTO WA_T024E
WITH KEY EKORG = WA_RECORD-EKORG
BINARY SEARCH.
IF SY-SUBRC EQ 0.
CLEAR WA_ZMVXREF.
READ TABLE I_ZMVXREF INTO WA_ZMVXREF
WITH KEY D_ALTKN = WA_RECORD-LIFNR
D_BUKRS = P_BUKRS
BINARY SEARCH.
IF SY-SUBRC EQ 0.
PERFORM BDC_FIELD USING 'EKKO-LIFNR'
WA_ZMVXREF-M_ALTKN.
ENDIF.
CLEAR WA_ZMVXREF.
ENDIF.
CLEAR WA_T024E.
PERFORM BDC_FIELD USING 'RM06E-EVART'
WA_RECORD-EVART.
PERFORM BDC_FIELD USING 'EKKO-EKORG'
WA_RECORD-EKORG.
PERFORM BDC_FIELD USING 'EKKO-EKGRP'
WA_RECORD-EKGRP.
PERFORM BDC_FIELD USING 'RM06E-WERKS'
WA_RECORD-WERKS.
PERFORM BDC_FIELD USING 'RM06E-LGORT'
WA_RECORD-LGORT.
PERFORM BDC_DYNPRO USING 'SAPMM06E' '0201'.
PERFORM BDC_FIELD USING 'BDC_CURSOR'
'EKKO-KTWRT'.
PERFORM BDC_FIELD USING 'BDC_OKCODE'
'=AB'.
PERFORM CONVERT_DATE USING WA_RECORD-KDATB V_CONV_DATE.
PERFORM BDC_FIELD USING 'EKKO-KDATB'
V_CONV_DATE.
PERFORM CONVERT_DATE USING WA_RECORD-KDATE V_CONV_DATE.
PERFORM BDC_FIELD USING 'EKKO-KDATE'
V_CONV_DATE.
PERFORM BDC_FIELD USING 'EKKO-ZTERM'
WA_RECORD-ZTERM.
PERFORM BDC_FIELD USING 'EKKO-KTWRT'
WA_RECORD-KTWRT.
VEN_FLAG = 1.
L_MAT_INDEX = 1. "index for table-control of material
ENDIF.
* "first check for itemline
IF WA_RECORDPREV-EPSTP NE WA_RECORD-EPSTP
OR WA_RECORDPREV-EMATN NE WA_RECORD-EMATN
OR WA_RECORDPREV-KTMNG NE WA_RECORD-KTMNG
OR WA_RECORDPREV-NETPR NE WA_RECORD-NETPR
OR WA_RECORDPREV-PEINH NE WA_RECORD-PEINH
OR WA_RECORDPREV-BPRME NE WA_RECORD-BPRME
OR WA_RECORDPREV-IDNLF NE WA_RECORD-IDNLF
OR WA_RECORDPREV-WEBRE NE WA_RECORD-WEBRE
OR WA_RECORDPREV-MEPRF NE WA_RECORD-MEPRF
OR WA_RECORDPREV-LTEX1 NE WA_RECORD-LTEX1
OR VEN_FLAG EQ 1.
V_IND = L_MAT_INDEX.
IF V_IND GT 1.
V_IND = 2.
ENDIF.
CONCATENATE 'RM06E-EVRTP(' V_IND ')' INTO V_EVRTP1.
CONCATENATE 'RM06E-EPSTP(' V_IND ')' INTO V_EPSTP1.
CONCATENATE 'EKPO-EMATN(' V_IND ')' INTO V_EMATN1.
CONCATENATE 'EKPO-KTMNG(' V_IND ')' INTO V_KTMNG1.
CONCATENATE 'EKPO-NETPR(' V_IND ')' INTO V_NETPR1.
CONCATENATE 'EKPO-PEINH(' V_IND ')' INTO V_PEINH1.
CONCATENATE 'EKPO-BPRME(' V_IND ')' INTO V_BPRME1.
CONCATENATE 'RM06E-TCSELFLAG(' V_IND ')' INTO V_TCSELFLAG1.
PERFORM BDC_DYNPRO USING 'SAPMM06E' '0220'.
PERFORM BDC_FIELD USING 'BDC_OKCODE'
'=NP'.
PERFORM BDC_DYNPRO USING 'SAPMM06E' '0220'.
PERFORM BDC_FIELD USING 'BDC_CURSOR'
V_EVRTP1.
PERFORM BDC_FIELD USING 'BDC_OKCODE'
'=DETA'.
PERFORM BDC_FIELD USING V_EPSTP1
WA_RECORD-EPSTP.
PERFORM BDC_FIELD USING V_EMATN1
WA_RECORD-EMATN.
PERFORM BDC_FIELD USING V_KTMNG1
WA_RECORD-KTMNG.
PERFORM BDC_FIELD USING V_NETPR1
WA_RECORD-NETPR.
PERFORM BDC_FIELD USING V_PEINH1
WA_RECORD-PEINH.
PERFORM BDC_FIELD USING V_BPRME1
WA_RECORD-BPRME.
PERFORM BDC_DYNPRO USING 'SAPMM06E' '0211'.
PERFORM BDC_FIELD USING 'BDC_CURSOR'
'EKPO-WEBRE'.
PERFORM BDC_FIELD USING 'BDC_OKCODE'
'=DETZ'.
PERFORM BDC_FIELD USING 'EKPO-IDNLF'
WA_RECORD-IDNLF.
TRANSLATE WA_RECORD-EVART TO UPPER CASE.
IF WA_RECORD-EVART EQ C_WK.
PERFORM BDC_FIELD USING 'EKPO-WEBRE' 'X'.
ENDIF.
PERFORM BDC_DYNPRO USING 'SAPMM06E' '0212'.
PERFORM BDC_FIELD USING 'BDC_CURSOR'
'EKPO-MEPRF'.
PERFORM BDC_FIELD USING 'BDC_OKCODE'
'=TXP'.
PERFORM BDC_FIELD USING 'EKPO-MEPRF'
WA_RECORD-MEPRF.
IF NOT WA_RECORD-LTEX1 IS INITIAL. "NE space.
PERFORM BDC_DYNPRO USING 'SAPMM06E' '0106'.
PERFORM BDC_FIELD USING 'BDC_CURSOR'
'RM06E-SELKZ(02)'.
PERFORM BDC_FIELD
Maybe you are looking for
-
Can't mount a folder from a windows network..
Our "IT" (outsourced) department migrated the network folders to another server and changed the filepath on the one folder I need to mount on my Macbook Pro (OSX 10.6.8). I have been able to mount the new folder onto other Windows boxes succesfully,
-
Buffer overrun detected in iTunes
When I synchronise photos from my PC to my iPod (5G, 30Gb) I get most of the time the next Error-message in a window named: Microsoft Visual C++ Runtine Library. The text of the message is: 'Buffer overrun detected. Program: C/Program Files\iTunes\iT
-
Disc drive no longer working on HP Pavilion dv9700 Notebook PC?
I have a HP Pavilion dv9700 Notebook PC that's running Windows Vista Home Premium. This morning I inserted a CDR to burn some files via iTunes and since then, my disc drive is not responding in anyway. I tried pushing the button on the disc drive,
-
Changing From Windows 8.1 PRO with Media Center To Just Windows 8.1 PRO
Hi, I am trying to convert my windows to Windows 8.1 PRO from an unactivated version of Windows 8.1 PRO with Media Center (a free trial I got when I purchased my computer that expired). I am having an issue where it says to "Activate Windows." I pur
-
We're having problems with the viewers freezing during playback of an audio/video clip. It will play for a short time 1 to 2 seconds then freeze catchup with itself and then play again further along the time line (same clip) Help....