Document which does not contain profit centre
Dear Gurus,
We are using New Gl and Document splitting using profit centre. But while inter segment transaction system allows automatically created line item(TDS) with out profit centre. now i want to delete that document or update profit centre in that line item how can we do that?
How we will restrict system from allowing such documents to post?
Regards,
Devesh Chaudhari.
Dear Devesh
Pls check the assignment of Segment in Profit Centre.
Better you reverse the existing document and post again.
Enable checkbox as profit centre is mandatory in step "Document splitting characterstics in GL Accounting" or write a validation with profit centre mandatory.
Regards
Sridhara Rao D
Similar Messages
-
RECON A/C DOES NOT CONTAIN PROFIT CENTER Error
I am posting the doc in *'R3*' Bank receipts-NORTH the entry depiting bank and crediting customer but system giving error this Reconcill G/L A/c does not contain Profit center, But if i posting in RV Billing doc.transfer system accepting I dont know wht is the exact error Plz solve my queries....
When you are performing traction Customer Receipts against invoice, system takes profit center from invoice line item, i.e for reconciliation line item, and in other line item which is a bank a/c, system defaults it by the rule of inheritance in doc. splitting (if active in your case).
and if you do not want to clear with any line item and still want to do a receipt then that has to be treated as ' Down Payment '. use special G/L to do such transactions, where you will not face this issue. also, check your document splitting setup and ensure G/L Account classification is correct.
Regards,
Sayujya -
OIM-How can i set a password policy which does not contain any space?
How can i set a password policy which does not contain any space?
I put space at Characters not allowed but it is not working.
Can anyone help me out?You can go to Settings>Messages and turn off Messages. Then go to Settings>General>Restrictions and turn on the the Restriction that prevent changing accounts.
I just verified that it works. -
Document 4500016031 does not contain any selectable items
Hi Friends,
I am doing MIGO(godds receipt) and adopted following procedure for MIGO.
ME5J----->(Entered my Proj. defn---> executed
Select material T-20610.
Click the "Assign automatically" pushbutton.
Assign materials T-20620 and T-20630 the same way.
Display the overview of the assignments and then create the purchase order.
Click the "Assignments" pushbutton.
The purchase requisitions are sorted in the overview according to their assignments. You can create new purchase orders by clicking the "Process assignment" pushbutton.
Place your cursor on the line below vendor "C.E.B.".
Click the "Process assignment" pushbutton.
Confirm the first dialog box by clicking the "Continue" pushbutton.
If another dialog box appears, click "New purchase order".
The purchase order appears.
On the left-hand side of the overview, select your three purchase requisitions and copy them to the purchase order.
Click the "Copy" pushbutton.
Save the purchase order.
Click the "Save" pushbutton.
The purchase order number appears in the status bar.
Make a note of the order number: ____4500016031________
Now I got the PO as per above procedure Now While I am doing MIGO---Goods receipt am getting the below message.
Any pointers is appreciated and will be rewarded.
Document 4500016031(PO) does not contain any selectable items
Message no. M7064
Diagnosis
The document or document item entered cannot be adopted.
Possible reasons for this are:
o The document items have already been processed
(Suggest zero lines indicator set?).
o the document items have been deleted or are blocked.
o the document items have been created for a different plant.
o (for reservations only) movements are not yet allowed for the
reservation items.
o (for reservations only) the document items are retrograde components
of the order. These are posted using the order confirmations.
o A confirmation must exist for the document items.
o The document items must be released first.
o The document is an R/2 document.
Procedure
Make sure your entries are correct.
o If the system has already processed the total quantity, you can set
the Suggest zero lines indicator. The system will suggest the
quantity zero for the items that have already been processed.
o If you have entered a particular item, cancel the item. If you do
not enter an item, the system searches all of the open items in the
o If the document is a purchase order, production order or a
reservation, you can enter search criteria in the dialog box.
You access the dialog box by choosing Enter with reference on the
initial screen.
o If the document is an SAP R/2 document, you have to cancel it
manually by entering the reversal movement type.
RegardsHi
Check item level Confirmation tab I think this PO is activated for Inbound delivery or Confirmation control
vIVEK -
I am busy making a website with iweb. Can I only make a page with a slideshow containing jpg's? I would like to make a (pages) document with pictures and have this as a slideshow. Is that possible?
If you use Keynote rather than Pages you can export as HTML to get a slideshow...
http://www.iwebformusicians.com/Banner-Slideshow/HTML-Slideshow.html
Or you can use a JQuery slider that will display text, images, movies etc...
http://www.iwebformusicians.com/Banner-Slideshow/Anything-JQuery-Slider.html -
I was locked out of my user account on my laptop due to a registry problem. I had another administrator account on the laptop so I am using that now. I could get to the files in the old account and copied them over...... All except the iTunes library. I have a new iTunes library in the new user account but it only contains my purchases, none of the music I downloaded from my own CD,s. Also all my playlists have disappeared. Fortunately, I still have all my library on my iPad and old iPod, but I can't find out how to transfer the music from them to the laptop. I can't back them up onto my laptop either, otherwise everything would be erased from them. I don't know what else has not been transferred over. I think all my apps are there, but none of the audiobooks.
If the music is purchased through iTunes:
iTunes Store: Transferring purchases from your iOS device or iPod to a computer
If the music is not purchased through iTunes:
Senuti — Recover music from your iPod, iPhone or iPad to your Mac -
How can I download CS5 to a computer which does not contain an optical drive?
I am considering purchasing a 8GB Ultrabook (Sony or Dell) and was wanting to install Adobe CS5 onto it. I purchased Adobe CS5 suite last year via disc and have only realised Ultrabooks do not have a DVD drive. Is there a way I can install my purchased copy via an Internet download using my registration/security key or do I need to purchase an external DVD RW drive to install the software?
Will a 8GB Ultrabook be sufficient to run Adobe CS5 on?Deeselle you can download CS5 from http://prodesigntools.com/all-adobe-cs5-direct-download-links.html. Please make sure to complete the Very Important Instructions section prior to scrolling down the page and clicking on the download links.
-
GR of Process order - Document does not contain selectable items
Hi Guru's,
While doing GR for process order, user is not able to do the GR because of the below message:
Document XXXXXX does not contain selectable items
The other user is able to do the GR. The status of process order is
REL PCNF PRC EXPL EXTS GMPS MANC PDLV. There is overdelivery tolerance so, the delivered quantity is more than ordered qty.
There is no auto GR setting, no COGI errors, no final delivery indicator, no authorisation issue.
What could be the reason for this ?
Thanks in advance.
Regards
KalyanHi Dee Joy,
I am using MIGO for posting the GR. So, kinldy let me know what setting in MIGO needs to be done.
Regards
Kalyan -
J1IEX post than made error like does not contain any selectable items
Respected Sir,
We have purchase the Goods From SEZ unit and it wil be treated as import made.
We doing the following activities
1. Prepared the Import P.O.
2. released the same P.O.
3. Doing the MIRO for Custome Vendor
4. Capture the J1iex
than we fins the below mention ERROR & Diagnoses and ERROR
Document 4400000016 does not contain any selectable items
Message no. M7064
Diagnosis
The document or document item entered cannot be adopted.
Possible reasons for this are:
u2022 The document items have already been processed
(Suggest zero lines indicator set?).
u2022 the document items have been deleted or are blocked.
u2022 the document items have been created for a different plant.
u2022 (for reservations only) movements are not yet allowed for the reservation items.
u2022 (for reservations only) the document items are retrograde components of the order. These are posted using the order confirmations.
u2022 A confirmation must exist for the document items.
u2022 The document items must be released first.
u2022 The document is an R/2 document.
Procedure
Make sure your entries are correct.
u2022 If the system has already processed the total quantity, you can set the Suggest zero lines indicator. The system will suggest the quantity zero for the items that have already been processed.
u2022 If you have entered a particular item, cancel the item. If you do not enter an item, the system searches all of the open items in the document.
u2022 If the document is a purchase order, production order or a reservation, you can
Kindly doneedfull above mention error
Thanks & Regards
Bipin ShahHI,
Please check whether all the vendor and excise details have been maintained in J1id. i.e Excise rate maintainance.
Hope this helps.
Regards,
Prasanna
Award pls if helpful -
"The stylesheet does not contain a document element" error
Hi,
I'm using Hyperion Financial Management 11.1.1.3
I successfully created intercompany transactions but when I select the "auto match" to perform the matching process, the running task page ensure that the process is completed successfully. However, when I press "log" I found the following error:
Error Number:-2147467259
Error Description:The stylesheet does not contain a document element. The stylesheet may be empty, or it may not be a well-formed XML document.
Error Source:msxml6.dll
Page On which Error Occurred:/hfm/Administration/ShowRunningTaskLog.asp
My environment is win server 2003 on a VM and EPM 11.1.1.3
Thank you and best regards,
Ahmed.Hi taku,
Yes I've solved my issue.
Firstly, make sure that the entities and accounts used in the Intercompany Transaction are allowed for ICP in the metadata file by setting the attribute "IsICP=Y" to yes.
Then, after you press the "Match" button, wait until the process finished and don't open the log. Just close the running task page, after the status showed that it is completed, and open the "process IC transactions" page again you will find the square sign becomes green which means that the transactions are matched.
I followed the following example on Oracle by Example [http://www.oracle.com/technetwork/middleware/financial-management/tutorials/mictrans-094190.html?ssSourceSiteId=otncn]
It's about "Managing Intercompany Transactions in Financial Management".
I wish you can solve your issue soon.
Best wishes,
Ahmed. -
'Document does not contain any items' error while posting GR from BAPI
Hello Friends,
I am trying to post GR from BAPI 'BAPI_GOODSMVT_CREATE' but some time it post successful and some time it does not post..gives error 'Document does not contain any items'....i have search all option but did not get any solution why this error is coming....kindly help me if you have any information regarding that.
The strange thing is i have alrady posted GR with some test data and later on again am trying to post GR with same test data but it is giving error as above.
For your information...i am using enhancement spot in standard program for GR posting...could it give any problem.
Regards,
Rajkishor.Solved by my self...problem was i were using enhancement spot in standard program because of this it was creating problem have search new enhancement spot and put my code out there now it is working fine.
Thanku very much all of you for your reply. -
I have an eMac which I want to connect to my home wireless network. My router is D-Link - 601 tech. 802.11n. My eMac is wireless ready but does not contain an airport card. Do I need a card and an airport station? What else?
You need the Airport card OR Airport Express but not both. Considering the age of your machine, I recommend Airport Express as you will find other uses for it whenever you replace the eMac.
To set up the AE, you do need OSX 10.4 or higher. -
ibooks author, how do I get the standard book pages background into my document. I have published one book so far which does not display with a book pages background or options for font size.
No on the book title, no problem there.
The issue is: my book pages appear as on white paper, no background that resembles a open book and also no option to change fonts. The book was created in iBooks author, there was a problem going with the "Publish" menu route so I was instructed my Apple to "export" the file and submit that. I think that's the problem after reading that iBooks author is a hybrid epub file.
Thanks for getting back to me. -
Document does not contain selectable items.
Hello Gurus,
My purchase team wanted to transfer plant from one plant to other.. and so they are creating STO , without any confirmation , while doing GRN 101 movement type Store person is facing error Document does not contain selectable items.
Please help to resolve the same.Hi,
1) this should be posted in MM forum, not here
2) let the person go to MIGO , to menu Settings, click Default Values and check checkbox "Propose All Items"
3) I guess if it is STO it would need goods issue first happening in source plant so that GR can happen in receiving plant (so first create Outbound Delivery in source plant, post goods issue against it and then do the GR with 101 against this delivery or PO itself)
Regards,
Tomek -
Document does not contain any selectable items
Respected Gurus!!!
The following error popped up while trying to capture excise invoice. The allocation was with reference to purchase order / scheduling agreement.
"Document does not contain any selectable items"
Here are the other relevant details:
1. Material has been "chapterised!!"
2. Excise details have also been maintained for the vendor.
My issue is:
Why is it that when I am trying to find the purchase order before doing a goods, this error comes up?
I wish to directly do a "capture excise invoice" without a goods receipt.
Seeking help gurus
JaideepHi,
First you have to post a goods receipt then capture & post Excise invoice using J1IEX.
Or you can post Excise invoice manual without referecne of purchase order.
But ideally you have to capture & post Excsie invoice after Goods receipt only where as only in case of Import you have to capture duties before GR through planned delivery cost using MIRO and after Godds receipt you can post the Excise invoice.
Maybe you are looking for
-
HT4759 how do i free up 4 gb of space so i can download mountain lion os x
what is the best way to free up 4 gb of space to download mountain lion os?
-
OSGi bundle JNI load/unload problem
Hi everybody!! One more thread about the topic. I still didn't find a solution. Can anybody help me? I have an OSGi bundle that access native methods from a JNI library (for a medical device). I could make my bundle work once, but the second time I t
-
I got a macbook pro i want to wath it on my hdtv
my macbook don't display anything on my hd tv
-
A very slow select with sub selects sql statement on Oracle
Hi, I'm moving an application from MySql to Oracle. The following select were very efficiently executed in MySql. In oracle its slow like a snail. Do anyone have a hint on how to speed it up? The slow part is the four sub selects in the select part.
-
I downloaded IE9 and now I can not send messages. I apologize to everyone if my name is linked to some posts which have absolutely nothing in them. Does anyone know if Microsoft is aware of this failure and if they are doing anything to correct it? D