Document without TAX

Hi experts,
Did SAP B1 allow the document without TAX or not?
regards
anand

Hello,
In Sales process :-
Form Sales Quotation to Delivery there are not need to select tax code (but item should not be exciable other wise you shold select excise tax code on delivery Document)
In A/R invoice you must select tax code it may be as exempted with rate zero because without tax code can not add docuemnt.
In Purchase Process :-
From Purchase Quotation to GRPO there are no need to select tax code(but item should not be exciable other wise you shold select excise tax code on GRP Document)
In A/P invoice you must select tax code it may be as exempted with rate zero because without tax code can not add docuemnt.
Thanks
Manvendra
Edited by: Manvendra Singh Niranjan on May 5, 2011 5:47 PM

Similar Messages

G/L account item without tax code in document with deferred taxes

Hi ,
While releasing the billing document to accounting i get this error " G/L account item without tax code in document with deferred taxes". Not able to release it to accounts. What could be the possible reason??
Actually, this error is occuring only when i am using a Discount Condition (Z Condition).
Please guide what could be the problem in the Discount Condition?
Thanks and Best Regards

whats this Z condition type. Is it a tax condition type. If yes , please check the tax code assigned to this in the condition type defintion (VK12) and in FTXP check if this code is assigned with Account key.
Also in the pricing procedure, if this condition is Active (not statistical) whats the account key assigned to it. Then check whats the GL Account assigned to this Account key (VKOA).
Then in FS03 , check this GL account number and under "Control Data" whats the Tax category maintained. You can have a * for the tax category here.
Hope this helps
Regards
Sai

G/L account item without tax code in document $1 with deferred taxes

HI ,
while posting throgh Vendor invoice iam getting below mentioned issue,
G/L account item without tax code in document $1 with deferred taxes
message noLff891
Please reply as soon as posible,
Regards,
Prema.

Hi
Please check the note 913805
Suggest you to reffer the below mentioned link
Deferred tax: Post invoice and payment separately $1" Message no. DEFTAX020
http://www.scribd.com/doc/20787563/Temporary-Differences-Result-in-Deferred-Taxes
Regards
Praveen PC
Edited by: Praveen Chirakkel on May 20, 2011 7:31 AM

Gl/L account item without tax code in document $1 with deferred taxes

Hi,
While processing MIRO i am getting this error message.. I have checked the GL master data, All the GL has marked as posting without tax allowed and tax category as *. the message no-FF891.please give me possible solutions.
Regards,
Venky

Hi Praveen,
Please check the Accounting entry. Check the same GL account in FS00 Control data tab the account has
Tax category = *
Tick Posting without tax allowed
This will resolve issue
Regards
Venky

Message:Row without tax was found

Sir,
When i try to make A/P Invoice for an interstate purchase against Form C, in that i give unit price inclusive of tax (i.e total amount including tax), so tax is not applicable for that ... so, i leave the tax code field blank,,and when i try to add the document, it give me mesaage"Row without tax field was found"... What could be the reason??

Hi,
I think you should fill it with Tax Group: Zero Rate, please do not leave it blank. And also check in tax group setup, tax account code should not be blank for each tax group.
Thanks and regards

Reset Clearing Document without reverse payment document

Hi Gurus,
Can anyone tell me if i can reset a clearing document without reverse a payment document.
The situation is this. I have an invoice that was paid by a payment document, and this movement generated a document clearing.
I need to do a reverse of the invoice and the payment no
Tks

Tks for your response but the problem is that the invoice have witholding tax. And, when I reverse the clearing document the program reset/reverse the payment document
Best Regards

FI fields problem amount without tax....

Hi,
I have to create one Finance module Report in which i am displaying gross value, the accounting department need to know the net value (without tax) now for reporting.
I tcode FB03 , if you see the document no then it will give all accounts, posting key wise amount, but this amount is gross amount. in this amount tax amount is added as per tax code. (you can see by clicking tax details tab).
i want net amount without adding tax amount. so please guide me table and fields from where and how i can calculate. in tax tab there is field base amount but its giving calculation against all total against document.
table i am using in my report is KNA1.KNKK, KNB1, BKPF. BSEG.
Give me some idea. how can i prepare report.
Have a Nice Day,
Regards,
Sujeet

Hi ,
You can look for the table WITH_ITEM. In this table you can get the total tax amount according to different categories.
Once you get the tax amount you can deduct the gross amount to get the net amount and get it displayed in your report.
Regards,
Anuj

OINV.DocCur -- Expense without Tax was found

Hi
We have a product which uses SAP B1 2004. We are creating A/R Invoice using DI API based on Delivery Note. So far application worked fine. One of my customers reported yesterday that, this invoice creation is failing now with the following message:
Error - 5002 - Expense without tax was found (OINV.DocCur).
What is this mean? and how can i fix this?
Thanks
Anand

The Tax code selected for the document has not had a GL Account Code determined for it.
Administration/Settings/Financials/Tax/TaxCodes
Then -> put the correct GL Account in the Tax Account!

Reg. Expense without tax was found

Hi Experts,
When i'm adding A/R invoice gettting Expense without tax was found, i put all the line item given tax code, Even im getting error,
Can anybody help me....
Thanks in Advance.
Anand.R

Hi Anand ,
this is because if u have any freight u need to give tax code while adding A/R Invoice otherwise system will not add that document.
so if u have created ant tax code with zero % u can take that and put it i freight tax and add the doc.
oherwise create one taxcode for exempt
regards,
kashinath

Parking MIRO Document Without Vendor Information

Hi,
I am trying to park a miro document without the vendor information and only with the header information like date, posting and amount, however the system is not allowing me to do so. Its showing an error message M8696 - Enter invoicing party. I tried to change this error message from E to W in OMRM t.code but it looks like this message has been hard coded to an error message in the MIRO program so changing it from E to W in OMRM does not help here.
How can i park this document in this case without vendor information?

Hi,
I want to park with the following details only :-
Invoice date
Posting date
Amount
Tax amount
This is the requirement from the user. Technically speaking since this is just a parking why can't the system allow parking?

Restricting for creating the Billing Document without PGI in STO Process

We want to restrict creating the Billing Document without PGI in STO Process
Delivery Type:NL
Item cataogory:NLN
Billing Type: JEX Profroma Invoice
I have check in VTFL
At Header Level, Routine - 003. for normal sales process LF-F2
At Item Level , Routine - 004
in VTFL-- NL-JEX
At Header Level, Routine - 009.
At Item Level , Routine - 010. here when i changed to 003 and 004 for NL and JEX
i am getting error after PGI when i am doing vf01 error is coming " document is not relevant for Billing"

Hi
Kindly do the belwo
1. goto the t code VOV7 item category determination and select the item category and put the billing relevance as "A"
2. once the step 1 is completed then it will show the billing relevant status AS "A"in the delivery documnt at the item level
The above configuration will be applicable in the new documents only
Regards
Damu

How do I add page numbers to my document without the page numbers automatically changing. I do not want the page numbers the software automatically places into my document.

How do I add page numbers to my document without the page numbers automatically changing? The title page is blank, I can type in 1 on the 1st typed page, but the #1 automatically goes into the next page and will not change.

Click at bottom of the first page:
Menu > Insert > Section break
Click somewhere in the 2nd page (not the header/footer)
Inspector > Layout > Section > Page Numbers > Start at 1 > Configuration > uncheck use previous headers and footers
Click into the header or footer of the second page:
Menu > Insert > Auto Page Numbers…
If there is anything in the header or footer on the first page that you don't want just select it and delete it.
If you really wanted to manual place page numbers on each page you will have to use a section break between each and every page. I can't imagine that would be useful.
Peter

How can I paste a part of a sheet from Numbers in Pages as text, without the formulas.The reason I need this (and was used to in Office) so that I have the freedom to delete something in one cell (in pages document) without causing changes.

How can I paste a part of a sheet that I copied in Numers in a pages document without the formulas, simply as text. Used this a lot in Office. When I make some changes in the pages document. f.i. deleting a cell, I don't want to change other cells. Also when I copy a part of a sheet from Numbers and one of the cells that is part of the formula is not also copied, when I paste in Pages it shows as an error.
Hope that You can me help with this.

Leon,
There are two solutions to the first question, narrowing to one solution when you have a broken link causing an error.
Here's the "works always" solution.
Copy (Command-C) the table or range in Numbers
Click off the table on the blank canvas of the sheet.
Edit > Paste Values
Command-C
Switch to Pages
Command-V
Regards,
Jerry

Using Firefox, I used to be able to open a document on a website and look at it without downloading. Now, I must download a document in order to view it. How can I change settings so that I can open documents without saving them?

Using Firefox, I used to be able to open a document on a website, such as a bank statement, and view it without downloading. Now, I must download and save a document before I can view it. How can I change settings so that I can open documents without saving them first?

Do you know what kind of docs they are? Did you upgrade/Update Firefox lately?
https://addons.mozilla.org/en-US/firefox/addon/pdf-download/
http://kb2.adobe.com/cps/333/333563.html
https://addons.mozilla.org/en-US/firefox/addon/open-it-online/

Can a change be made to the original Word document without losing form fields in a saved PDF form?

I have a new fillable form created with Acrobat 9 that has 10 pages of fields on it. I noticed a typo in the original Word doc I created the form from and wondered if there is anyway to make changes in the source document without having to recreate all fields again.
Thanks!
Frank

Yes, just create a new PDF and replace the pages of the old one that has the form fields with the pages from the new: Document > Replace Pages
Any fields, code, bookmarks, links, etc. will be retained.

Document without TAX

Similar Messages

Maybe you are looking for