Documentation about Content Area APIs and Views
Can somebody point me to the documentation about Content Area APIs and also the documentation about the views of the Content Areas ?
I have not been able to find nothing else that what is available in the package specs.
Thank you for your help.
Hi,
Please Refer to this thread.
Re: eclipse designer not found in Beta 3
--Sriram
Similar Messages
-
IN IMG, I couldt see details documentations about particular area.
hI
when I m IN IMG, I couldt see details documentations about particular area.
ex. when under Asset accounting goes for valuation and want to see document for valuation? I do click left side document Icon and nothing happen?
could any one guide me how to activate this to view documentation?
thanx in advance
BobbyHi Attila,
there are demos available on the SAP Service Marketplace (http://service.sap.com/healthcare-tutorials) that will give you a good impression of the key capabilities of SAP for Healthcare.
If you are particularly interested in the industry-specific solutions SAP Patient Management and SAP Ambulatory Care Management, the documentation is available in the SAP Help Portal (direct link: http://help.sap.com/saphelp_erp2005vp/helpdata/en/59/1c86353e13d558e10000009b38f889/frameset.htm)
Best regards,
Katharina -
Does the content area API work with Release 2?
Does the content area API work with Release 2 yet?
Release 2 page group APIs will be available in early 2003, in the first PDK version following the 9.0.2.6 (upgrade) release. These APIs will be backward compatible with the 3.0.9 content area APIs.
-
Difference between content area page and page
Can someone point me to doc or tell me what is the difference
between content area page created in Content Area Manager and
the page created in create page tool ?
I'm really confused.
Thanks.
Regards,
MaggieEssentially they're the same.
The CA page get's implicitly created when you create the CA
because architecturally when we display content for you to work
with we need a place to post the navigator portlet and the
content portlet.
In the next release this will change, there will be only one
type of page, and you will be able to add content and/or
portlets to it.
HTH
Jason Pepper -
Anybody Wrestle with this beast "Content area API"
Hi
Has anybody harnessed the Content area API of portal version 308.
I am laying down the specs to write a command line utility for item upload.
I was wondering if i am pioneer or we already have pioneers...:)
also if pioneers are willing to share their experiences.Harish,
This question is more appropriate for the "Oracle 9iAS Content Areas" section. Try it there... -
Is there any Documentation about MDM4J (Java API) ?
Hello to all,
I was wondering... Is there any possibility to get documentation about the classes in the MDM4J.jar ?
We can not use the other Java Api, and we need to understand this one.
Thanks in advance,
Mariano.-Dee Bishnu wrote:
You're looking for documentation in addition to the javadoc included with MDM4J, right?.-
Exactly, but, I don't have the javadoc that are included with MDM4J. Are the javadocs always shipped with the MDM4J.jar?
RDNPrasad wrote:
Hi Mariano,
all the documentation is available via the MDM documentation center on SAP Service Marketplace:
http://service.sap.com/installMDM
Yes, but in that adress you only see the last documentation, and I want an old documentation that isn't found there.
Nico Razlow wrote:
hier is the link to the Java API SP3 (mdm4j):
https://websmp209.sap-ag.de/~form/sapnet?_FRAME=CONTAINER&_OBJECT=011000358700007403222005E
Thanks !! That PDF was really helpful !!!
Sudheendra Puth wrote:
To work on java api using MDM4J use the below link on javadoc
http://help.sap.com/javadocs/MDM/SP06P2/index.html
Kindly award points if it was helpful
That adress is the documentation for the "New Java API", not the MDM4J.
I'm going to put the question as answered because the PDF that Nico provided is like a javadoc. If anyone has any more information, please contact me privately.
Thanks to all for the Answers !!!
Mariano.- -
How can i make the navigation easier in my content area? (TREE VIEW)
Now I use 1 navbar for my whole content area.
This is what I want :
I would like to navigatie in my content area lik I navigate in the explorer of microsoft.
Is there a script,
portlet, or something like that.
when I delete a folder it must automaticle disapear from the tree view.
When I add it must be displayed.
When the folder isn't public it, the public can't see it
thxc in advance
Bert LeemanIf you are using the same nav bar you could build a custom nav bar in the shared objects and publish it as a portlet. In the properties of a folder you can assign an image for the nav bar. This could make it look like a tree assuming you build the images that way. Also your folder links should disappear from the nav bar when they are deleted. I think.
-
Switching Content Area Portlet Edit/View Mode
I am trying this question again since I did not get responses to my first try.
The current Content Area Portlet included with Portal 3.0.8 works fine except that it does not include the "Main Banner" nor the "Sub Banner". This means that portlet users do not have access to either the "Edit/View folder" function nor the current folder name.
My customer would like some users to have item upload capability. What are my choices without these banners? I can access the content area in "full page" mode and have the banners available. But this is undesirable since we would like the content area to stay "in the portlet" in order to maintain portal context.
I might be able to switch the edit/view function from another portlet on the same page if I pass the p_edit and p_mode parameters to redraw the multiple portlet page correctly. I have tried passing p_edit using the portlet reference path "&162_KCPCONTENTAREA_6429252.p_edit=1", but the Content Area Portlet does not respond. What else do I need to do? Is this even possible?
Thanks for any advise you can provide
nullPlease try the discussion forum for Content Areas at:
http://technet.oracle.com:89/cgi-bin/forumdisplay.cgi?action=topics&forum=Oracle9<i>i</i>AS+Portal+Content+Areas&number=82&DaysPrune=20&LastLogin= -
Switching Content Area Portlet Edit/View Folder Mode
The current Content Area Portlet included with Portal 3.0.8 works fine except that it does not include the "Main Banner" nor the "Sub Banner". This means that portlet users do not have access to either the "Edit/View folder" function nor the current folder name.
My customer would like some users to have item upload capability. What are my choices without these banners? I can access the content area in "full page" mode and have the banners available. But this is undesirable since we would like the content area to stay "in the portlet" in order to maintain portal context.
I might be able to switch the edit/view function from another portlet on the same page if I pass the p_edit and p_mode parameters to redraw the multiple portlet page correctly. I have tried passing p_edit using the portlet reference path "&162_KCPCONTENTAREA_6429252.p_edit=1", but the Content Area Portlet does not respond. What else do I need to do? Is this even possible?
I would appreciate any advise you can provide.
Thanks, Wendel YaleI have determined that there will be be an edit link included in the Content Area Portlet in the 3.0.9 release due out in May. This leaves open the question of support for parameter passing for out-of-the-box portlets. Will (Is) this supported?
-
Hi,
I want to use public API to add items to content areas. However this API ( wwsbr_api) seems only work when user is Portal30. When i try to run this API with other user it fails.
i've run the script sbrapi.sql to add some grant to the user.
This is the command that i'm trying to run with a database user that is diferent from portal30
declare
id number;
begin
ID := portal30.wwsbr_api.add_content_area
p_name => 'ENTERTAINMENT',
p_display_name => 'Entertainment Site',
p_versioning => portal30.wwsbr_api.VERSIONING_AUDIT,
p_default_language => 'us',
p_logo_filename => 'c:\temp\confirmar.gif'
end;
This is the error that is raised ..
The following error has occurred:
ORA-06510: PL/SQL: unhandled user-defined exception
ORA-06512: at "PORTAL30.WWSBR_API", line 32
ORA-06512: at line 4
i'll apreciate some help
Thanks
Pedro RibeiroI forgot some info ...
I'm using Portal 3.0.8 in a 8.1.7 database
Platform is Windows Nt -
Some question about mdm java api and portal content
Hi Gurus,
I am new to MDM. I am going to develop some web dynpro application using mdm java api.
My question is regarding the relationship between MDM version and NW version:
for example
1.MDM5.5 JAVA api can be deployed to CE 7.11 server?
2.MDM7.1 JAVA API can be deployed to CE 7.11 server? or can only be deployed to CE server.
the same question for the MDM portal content.
the possible dev environment for our company would be:
1.MDM7.1
2.CE7.2(do we need another EP7 server for the UWL?)
Best regards,
JohnHi,
I am using Portal 7.0. MDM version is 7.1.
My problem is ... i am trying to connect WebDynpro (JAVA) to MDM7.1. But am unable to do so. I have a WD Frame in which i have a WD iView and the MDM iView. But i am unable to pass parameters from the WD iView to MDM Item Details iView.
Note:
1. I have deployed MDM JAVA API on NWDS
2. I have specified " * " as a parameter to pass from the URL in the Item Details iView.
Please help.
Every help that i have read talks about CE7.1 but not NW 7.0
-Alpana -
Disappearing content area in edit view
Hello,
In contribute, the content of my page dissapears when I click to "edit page." My other pages work fine when I click to edit, it is just one page that the content dissapears. Any ideas of how to get that back?
Below is the page before I click "edit page". The second image is what happens to the page after I click "edit page." I loose the data/text in the middle of the page that I need to change.
Thank you in advance for your help!!You are not alone. I too cannot edit my home page. All other pages edit fine. Here is the home page. http://www.audiofilesolutions.com.
Here is how a subpage looks in CS4 & CS5 when editing.
And here is how the corrupted home page looks.
As you can see, all the text and content goes away except for the dropdown menus and links at the top and bottom. As I mentioned, this occurs in both CS4 and CS5 trial versions of Contribute. When trying File/Edit in external application which is notepad on my system, sometimes the text is formatted and coherant (like when you open View Source in IE8) and other times notepad opens up as all text, no spaces, or formatting of any kind--looks like a garbled mess.
Any help is appreciated. -
Content Area API in 9.0.2 (wwsbr_api) is there a workaround?
The end goal is to have a button in a region that takes users to an add item form. I want to have the button right on the page, without having to go to edit mode.
So, looking at the PDK I see wwsbr_api.add_item.
http://portalstudio.oracle.com/pls/ops/docs/FOLDER/COMMUNITY/PDK/plsql/doc/sdk23ai.htm
Unfortunately, 9.0.2.2.22 does not support this API. Additionally, this document references a view, WWSBR_ALL_FOLDER_REGIONS, that does not exist in this release of Portal.
Does anyone have a suggestoin for how to do this in 9.0.2?11g XE is actually based on 11.2.0.2.0. It actually includes some fixes and changes in addition to that patchset.
That means the problem either exists in all post-11.2.0.2 releases or is due to some XE-specific change. If you experience the problem in any post-11.2.0.2 or 12c release, let me know. I can file a bug and have the problem identified and fixed.
With an XE bug, it can't be fixed until Oracle's next XE release, even if we identify it now. That will likely be around a year after Oracle releases DB 12c R2. -
About runtime sequence creation and view dare pre commmit.
Dear All,
My 2 New Question are:
1)Could Oracle suggest to create sequence(DDL) from run-time.That means I need(My client requirement) regenerate of sequence(I know it is possible by cycle but i don't know MAX value when it will cycle)as monthly or a specific time so I want to drop sequence and create sequence by a)Programmetically runtime
b) Oracle scheduler runtime .
Have any good and better Idea? Any risk factor?
Note that at a time possibly more than 100 users will data entry with our software.
2)My New query is Could I view table data which was not yet COMMITTED from other session-other user.
Regards and Thanking you,
ZAKIR
Analyst ,
SynesisIT,
www.Synesisit.com
=====I tried that, but there are too many trouble.
For only references.
-- Usage
Procedures
execute periodic_seq.seq_def create sequence
execute periodic_seq.seq_undef drop sequence
Functions
periodic_seq.nextvalue
get nextval of specified sequence
periodic_seq.currvalue
get currval of specified sequence
seq_def
in_seq_name varchar2 (30)
sequence name (current schema)
in_trunc_unit varchar2
'yyyy','mm','dd','hh24','mi' : format on trunc(date)
seq_def
in_owner varchar2 (30)
schema name
in_seq_name varchar2 (30)
sequence name
in_trunc_unit varchar2
'yyyy','mm','dd','hh24','mi' : format on trunc(date)
incr_by integer (default:1)
increment by
start_with integer (default:1)
start with
maxvalue integer (default:to_number('1e27'))
maxvalue
minvalue integer (default:1)
minvalue
cycle varchar2 (default:'N')
'Y':cycle/'N':nocycle
cache integer (default:20)
cache
time_order varchar2 (default:'N')
'Y':order/'N':noorder
seq_undef
in_seq_name varchar2 (30)
sequence name (current schema)
seq_undef
in_owner varchar2 (30)
schema name
in_seq_name varchar2 (30)
sequence name
nextvalue
in_seq_name varchar2 (30)
sequence name (current schema)
nextvalue
in_owner varchar2 (30)
schema name
in_seq_name varchar2 (30)
sequence name
currvalue
in_seq_name varchar2 (30)
sequence name (current schema)
currvalue
in_owner varchar2 (30)
schema name
in_seq_name varchar2 (30)
sequence name
-- Source --
-- Control table
create table cycle_seq_ctrl
(sequence_name varchar2(30) not null
,min_value integer
,max_value integer
,increment_by integer not null
,cycle_term varchar(10) default('dd') not null
,last_number integer not null
,reset_time date
,prev_nextval integer not null
,constraint pkey_cycle_seq_ctrl primary key (sequence_name)
organization index
create or replace
package cycle_seq
authid current_user
is
function nextvalue
(seq_name varchar2
,in_date date := sysdate
) return integer
function currvalue
(seq_name varchar2
) return integer
procedure seq_def
(seq_name varchar2
,cycleterm varchar2 := 'DD' /* Defaults : reset by a day */
,incr_by integer := 1
,start_with integer := 1
,maxvalue integer := to_number('1e27')
,minvalue integer := 1
procedure seq_undef
(seq_name varchar2
end; -- package cycle_seq
create or replace
package body cycle_seq
is
type currval_tab_type is table of integer index by varchar2(30);
currval_tab currval_tab_type;
function nextvalue
(seq_name varchar2
,in_date date := sysdate
) return integer
is
pragma autonomous_transaction;
timeout_on_nowait exception;
timeout_on_wait_sec exception;
pragma exception_init(timeout_on_nowait, -54);
pragma exception_init(timeout_on_wait_sec, -30006);
p_seqname cycle_seq_ctrl.sequence_name%type;
p_ctrl cycle_seq_ctrl%rowtype;
p_currtime date;
p_nextval integer;
begin
p_currtime := in_date;
p_seqname := upper(trim(seq_name));
select *
into p_ctrl
from cycle_seq_ctrl
where sequence_name = p_seqname
for update wait 1
if (p_ctrl.cycle_term<>'SS') then
p_currtime := trunc(p_currtime,p_ctrl.cycle_term);
end if;
-- need to reset
if (p_ctrl.reset_time < p_currtime) then
if (p_ctrl.increment_by > 0) then
p_nextval := p_ctrl.min_value;
elsif (p_ctrl.increment_by < 0) then
p_nextval := p_ctrl.max_value;
else
p_nextval := p_ctrl.last_number;
end if;
update cycle_seq_ctrl
set last_number = p_nextval
,reset_time = p_currtime
,prev_nextval = last_number + increment_by
where sequence_name = p_seqname
currval_tab(p_seqname) := p_nextval;
commit;
return p_nextval;
end if;
-- already reseted (in a same second)
if (p_ctrl.reset_time = p_currtime) then
p_nextval := p_ctrl.last_number + p_ctrl.increment_by;
update cycle_seq_ctrl
set last_number = p_nextval
where sequence_name = p_seqname
currval_tab(p_seqname) := p_nextval;
commit;
return p_nextval;
-- already reseted
else
p_nextval := p_ctrl.prev_nextval + p_ctrl.increment_by;
update cycle_seq_ctrl
set prev_nextval = p_nextval
where sequence_name = p_seqname
currval_tab(p_seqname) := p_nextval;
commit;
return p_nextval;
end if;
exception
when no_data_found then
raise_application_error(-20800,
'cycle_seq.seq_def('''||seq_name
||''') has not been called.');
when timeout_on_nowait or timeout_on_wait_sec then
raise_application_error(-20899,
'cycle_seq.nextvalue('''||seq_name
||''') is time out.');
when others then
raise;
end
function currvalue
(seq_name varchar2
) return integer
is
p_seqname cycle_seq_ctrl.sequence_name%type;
begin
p_seqname := upper(trim(seq_name));
return currval_tab(upper(seq_name));
exception
when no_data_found then
raise_application_error(-20802,
'cycle_seq.nextvalue('''
||seq_name||''') has not been called in this session.');
when others then
raise;
end
procedure seq_def
(seq_name varchar2
,cycleterm varchar2 := 'DD'
,incr_by integer := 1
,start_with integer := 1
,maxvalue integer := to_number('1e27')
,minvalue integer := 1
is
p_seqname cycle_seq_ctrl.sequence_name%type;
p_currtime date;
p_cycleterm cycle_seq_ctrl.cycle_term%type;
begin
p_currtime := sysdate;
p_seqname := upper(trim(seq_name));
p_cycleterm := upper(trim(cycleterm));
if (p_cycleterm<>'SS') then
p_currtime := trunc(p_currtime,cycleterm);
end if;
insert into cycle_seq_ctrl
(sequence_name
,min_value
,max_value
,increment_by
,cycle_term
,last_number
,reset_time
,prev_nextval
values
(p_seqname
,minvalue
,maxvalue
,incr_by
,p_cycleterm
,start_with - incr_by
,p_currtime
,start_with - incr_by
commit; -- Because this is as like a DDL
exception
when dup_val_on_index then
raise_application_error(-20955,
'already defined with '
||'cycle_seq.seq_def('''||seq_name||''')');
when others then
raise;
end
procedure seq_undef
(seq_name varchar2
is
p_seqname cycle_seq_ctrl.sequence_name%type;
begin
p_seqname := upper(trim(seq_name));
delete from cycle_seq_ctrl
where sequence_name = p_seqname
commit; -- Because this is as like a DDL
end
end; -- package body cycle_seq
/ -
Where can I find documentation on content area api's?
Nicola,
portalstudio.oracle.com -> Rel 1 (from navbar on the left) ->PDK -> PLSQL
remember that Rel. 2 compatible sbr apis have not been released yet.
Where can I find documentation on content area api's?
Maybe you are looking for
-
I only want one user account to recognize iPod.
I have searched all over trying to find a solution to this. My wife has an old iPod Nano that she jogs with. When not in use it is stored on a dock attached to our iMac. On that iMac we both have user accounts and maintain seperate iTunes librarie
-
Please help! I've done a bunch of stuff already, with no results. Something regarding a file called envelope something-or-other, gone through the "rebuild mailbox" route, and none of it has helped. I click on any mail in my IMAP inbox and it takes at
-
AS3 send/import variables to/from php file
Hi im new I would like to send some variables from ac3 to a php-file. the php-file have to copperate with this variable (send querystring to mysql-server). ac3 have to read then new variables and traced it on the screen. i found some examples on the
-
Photoshop is not exporting Lightroom metadata when saving as JPG
For years I've been able to load files from LR to Photoshop CS3 and Photoshop CS4, edit the image and then save as a JPG file. Then I can re-import them to Lightroom and they have always retained their colour ratings and star ratings. Now that I ha
-
i keep recieving and "out of paper" error message while attempting to print. i have tried loading the main paper tray full of paper, half full and even with a single sheet and i keep recieving this message. the printer has already completed several p