Documentation and test - Certificate Crystal

Hi everyone,
may you tell me if does exists some documentation or tests to persecute the Crystal Certification?
And where i can find it?
Thanks for your help.
LC

Please re-post if this is still an issue or purchase a case and have a dedicated support engineer work with your directly

Similar Messages

Change Management and Test Workbench for documentation

Hi,
I would like some clarification on the association between change requests and test workbench.
I'm going through scenarios such as creating a maintenance project, creating a task list and service message and then creating a transport request.
During these steps, I want to document the test results prior to migrating these transports into the production system.
My questions are - how do you link the maintenance project and also urgent corrections to a test procedure and documentation. It appears that by using solar01/solar02 and stwb_2/stwb_work, these tests are linked to a project and not necessarily a "change request"
I greatly appreciate if you can elaborate the association between the various areas a bit clearer for me.
Thanks!!!

You need to look for information on usage type "DI", "Development Infrastructure" or "NWDI" (all common abbreviations for the same thing). There were some very good presentations on NWDI at TechEd this year.
Here are some links to help documentation:
<a href="http://help.sap.com/saphelp_nw2004s/helpdata/en/63/7a4d40eae76f13e10000000a1550b0/frameset.htm">Administration of the Development Infrastructure</a>
<a href="http://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/sdn/developersguide">SDN NetWeaver Developers Guide</a>
Rich

Portal and BW certificate must be different

Hi,
We've installed BI with BI Java and Portal as Addin on same System.
We've configured the BI & Portal integration via NWA and everything is ok. But after when tested we got " The system is unable to interpret the SSO ticket received " errors during Bex Launcher.
When we checked the configuration via RSPOR_SETUP Repost on ABAP Stack, everything except the following seems ok.
Status 10: Import Portal Certificate into BI            <b>Portal and BW certificate must be different</b>
Status 12: Maintain User Assignment in Portal           <b>System failure during call of function module RSWR_RFC_SERVICE_TEST</b>
I think the problem is when we imported the Portal Certificate into BI, as they reside on same system error occurs at step 10.
This is the production system. On Development System, Portal+BI Java are on another server than BI and this problem was not occured.
Does anyone experienced this issue?

Hi,
Of cours I've solevd the issue via sap note "917950 SAP NetWeaver 2004s: Setting Up BEx Web"
Here is the section you've to consider ;
Add-In Installation and importing Certificates with identical system ID (SID)
In case of Add-In installation, the system ID (SID) of
AS-ABAP and AS-Java is identical. This causes problems
during import and certificates, if you are using the
Template Installer. Because the ABAP system does not allow
to import a certificate with identical Distinguished Names (DN) (e.g. identical common names (CN), subject names, ...). Also the standard client of the J2EE must be different from the standard client of the ABAP system.
If the common names are identical, the report RSPOR_SETUP
displays the error message "Portal and BW certificate must be different" (English).
If the client of the Portal certificate is existing in the
ABAP system, the error message "Add-In Installation: check logon.ticket_client (see note 994785)" is diplayed.
This issue could be solved by creating a new Portal
certificate with a different Distinguished Name (DN). The
steps to create a new Portal certificate are described in
the report RSPOR_SETUP documentation of step "Export Portal Certificate to the Portal" (step 9):
     1. Delete J2EE certificate (SAPLogonTicketKeypair
and SAPLogonTicketKeypair-cert) in Visual Administrator under Services Keystorage
     2. Create new J2EE certificate (SAPLogonTicketKeypair with other Distinguished Name) in
Visual Administrator under Services Keystorage (as
described in documentation of step 9 "Export Portal
certificate in Portal", report RSPOR_SETUP)
     3. Delete J2EE certificate in certificate list
and access control list (ACL) with transaction STRUSTSSO2
     4. Import new J2EE certificate to certificate
list in transaction STRUSTSSO2
     5. Add new J2EE certificate to access control
list (ACL) in transaction STRUSTSSO2
See report RSPOR_SETUP documentation of step "Configure User Management in Portal" (step 8) or note 994785 how to
change the standard client of the J2EE.
Message was edited by:
        HUSEYIN BILGEN

Setup SSL using test Certificate

Hi,
All I am trying to setup SSL on my weblogic server 6.1. I have generated CSR and
received a temporary free certificate from verisign. But I am having hard time
following documentation..as wording is misleading. Can anyone tell me exactly
how would I setup/configure SSL using this test certificate. Any help ASAP will
be greatly appreciated.
Thanks
Jitesh

Yeshwant,
I looked at my weblogic.log file and apparently last log I see is when I actually
generated a CSR using servlet. That was last week, no updates to log after that.
I got my error on IE browser version 5.0
Also CA root file that you pointed me to will not work. I am assuming do if I
need to go buy valid certificate which comes along with CA file and CSR.
Thanks
Yeshwant <[email protected]> wrote:
Hi Jitesh
can you attach the weblogic.log file ?
If you look at the logs or the server startup do you see something like
<Aug 6, 2002 11:35:08 AM PDT> <Notice> <WebLogicServer> <SSLListenThread
listening
on port 7002, ip address 172.17.24.85
in your log ?
I am trying to understand if the ssl listen thread comes up or not .
"There was a communicator problem"
Is this error coming in the browser? if so which browser and what version
Jitesh wrote:
Yeshwant,
Thanks for providing good information to my question. I tried whatyou told me,
but still I cannot get SSL to work. Any suggestions. I get Problemreport as:
"There was a communicator problem", when I use https after configuringit.
Thanks
Yeshwant <[email protected]> wrote:
Hi Jitesh
There are 3 things needed to get up and running with ssl
1)Server Key File Name --> This is the private key which is generated
along with the
CSR (usually by the certificate webapp if you are using it)
2)Server Certificate File Nname --->This is the certificate that verisign
sent you
3)Server Certificate Chain File Name ---> This should be either sent
by verisign or
it will be available on their site . If not try the Intermediate
CA
available at
http://www.verisign.com/support/install/index.html
On the right there is a link titled (Get Intermediate CA here )
All these 3 fields can be configured through the Console-->Server-->SSL
tab
Restart the server and it should be able to use the trial certificate
and start the
SSLListenThread
Jitesh wrote:
Hi,
All I am trying to setup SSL on my weblogic server 6.1. I have generatedCSR and
received a temporary free certificate from verisign. But I am havinghard time
following documentation..as wording is misleading. Can anyone tellme exactly
how would I setup/configure SSL using this test certificate. Any
help
ASAP will
be greatly appreciated.
Thanks
Jitesh

Problems with concurrency tests using Crystal Reports for VS 2005

Post Author: condeagustin
CA Forum: General Feedback
Hi
My name is Agustin and Im using Crystal Reports for VS 2005
and NET 2.0 to generate pdf files. This is the scenario:
I created a COM+ object in c# and everytime the
COM+ creates an instance of this object, the following flow is executed:
it reads an xml file from a database, then it feeds the report with this
xml file, afterwards it generates a pdf file and finally this pdf file is
inserted into the database. Both fields (xml and pdf fields) are varbinary in the
same table in sql server 2005. All the flow from reading the xml to inserting
the pdf into the database is executed in memory, it never goes to the hard
disk. In other words both the xml and the pdf file are stored in memory (the
RAM). That is the only function of that COM+ object and I already have it in a
production server and it works GREAT!!
The PROBLEM is the concurrency tests. I made the following tests
in the same production server:
1. First I went to the registry and I set the PrintJobLimit to
100 in HKEY_LOCAL_MACHINESOFTWARECrystal Decisions10.2Report Application
ServerServer
2. I shut down the object in the COM+ and I executed 100
threads all at the same time. Each thread created one instance of the object in
the COM+ and the 100 pdfs were generated SUCCESFULLY in 5 minutes!!
3. Then I executed again 100 threads (WITHOUT shutting down the
object in the com+). 10 pdfs were generated succesfully but the rest were
never generated and there was no exception because my object was NEVER
INSTANTIADED in the COM+, I mean, the 90 instances were never created in the
COM+, so my object was never executed, THAT IS MY PROBLEM!! Do I have to
modify something in the registry files of crystal reports to fix this? What can
I do? I have revised the code in that object a LOT OF TIMES and believe me,
everything is being closed and disposed at the end (the memory streams, the
ReportClass objects, the connection to the database, even the dataset used to
store the data of the xml file!
So to sum up the problem is not with the execution of my object
(cause once is created the object works great and the pdf is generated
perfectly!), the problem is with the com+ TRYING to create another instance
of my object given that test scenario. Help me please, What do you
suggest?
The production server has this specifications:
Operative System: Windows Server 2003 Enterprise Edition with Service Pack 2
Processor: Dual Core AMD Opteron 2212 2.00GHz
RAM: 820MB
Hard drive: It is partitioned in 2 drives --> C
drive has 20GB and D has 60GB
Note: Each generated pdf has only one page and if you bring it
to disk its maximum size is 56KB
I hope your answer and thank you
Agustín Conde Martí

Post Author: John Werner Enoksen
CA Forum: General Feedback
Hi, im about to write a simular solution where I will use VS2008/Com+ to be in compliance to an existing solition written in VB6.0, so I was googling to look for bumps. Did you figure this one out?
Best regards,
John Werner

Need help with adding formatted text and images to Crystal Report?

Here's my scenario:
I have a customer statement that's generated as a crystal report and that has a placeholder for advertisement. The advertisement is mixture of formatted text and images. Until now we only had one advertisement that was always used on the report. The new requirement is that we would have a pool of hundreds of advertisements and would need to display one specific advertisement on the customer statement based on various marketing criteria. They key is that the advertisement content will be determined programmatically and cannot be hardcoded into the report. I'm using Crystal2008 with .net SDK.
Here are the solutions I thought of, but I'm still rather lost and would appreciate your help/opinion.
1) Pass HTML or RTF to the report
Not really sure if this is possible and how to get it done. Also how would I pass in images? Would display formatting be reliable when exporting to PDF?
2) Create each add as a subreport and append it programatically
I actually have this working, but I only know how to append a new section to the end of the report and then load the subreport to the section. I have no other controll of the placement. Is there a way to dynamically load a subreport to a predefined section in the main report? How about adding a dummy subreport in the main report as a placeholder and then replacing it with a different subreport? How could I do this?
3) Pass an Image to the report
I would create each advertisement as an image and then would somehow add the image to the report. How would I load the image and control the placement? Could I somehow define a placeholder for the image in the main report-maybe a dummy image to be replaced?
Thank you.

Hello Pavel,
I would got the third way.
You can use dynamic images in your report.
Just by changing the URL to the image the image can be changed.
Please see the [Crystal Manual|http://help.sap.com/businessobject/product_guides/cr2008/en/xir3_cr_usergde_en.pdf] and search for images.
or directly here
[Setting a Dynamic Graphic Location Path on an Image Object|https://boc.sdn.sap.com/node/506]
[Dynamic image and HTTP://|https://boc.sdn.sap.com/node/3646]
[codesample for .NET|https://boc.sdn.sap.com/node/6000]
Please also use
[Crystal Reports 2008 SDK Documentation and Sample Code|https://boc.sdn.sap.com/developer/library/CR2008SDK]
[Crystal Reports 2008 .NET SDK Tutorial Samples|https://boc.sdn.sap.com/node/6203]
Hope this helps
Falk

Quality Test Certificate Outgoing (Delivery)

Dear QM Gurus,
Here I am having one scenario where I need to print test certificate for delivery considering inspection characteristics of a finished material and semi finished material at different BOM levels.
Ex:
Finished Material : FERT001
SemiFinished Materials : HALB001, HALB002 & HALB003.
Raw Materials: ROH001 and ROH002
Process: FERT001 produced using HALB003 Produced using HALB002 produced using HALB003 Produced using ROH001 and ROH002
At HALB003 we are going to capture some characteristics and FERT001 I will capture some other characteristics, Now at the time of delivery I want to print both(FERT001 and HALB003) inspection characteristics results in Certificate.
Except FERT001 for all other materials batch is maintaining(No batch Characteristics) for tracking purpose.
I tried some standard procedure like assigning both material in quality certificate and all MICs relevant for both materials. Result origin and inspection spec origin as 03 and Material sort no as 2 where i maintained this material in Materials sequence.
With all the above mentioned settings I tried but I con't able to print the characteristic results of HALB003 in test certificate I can able to get only FERT001 Insp Characteristics only.
Please help me in getting it done, it is critical requirement for our client.
Thanks and Regards,
Krishna Mohan.NSL

As Vishal saying in standard fert material must have batch.
Normaly if u want to fetch the characteristics value on certificate then
1. you need to define certificate profile with relevent characteristcis.
2. for Halb and ROH material characterictics relsult and inspection spec origin should be 3
3. related to Halb material and ROH material has to assign in material tab in class characteristics or MIC.
if you done the above setting in your profile correctly you must have to get the details of RR on your certificate.
Thanks & Regards,
Nilesh

Tds cycle mapping and testing

hi,
i have the problem regarding to the tds cycle,so pls inform about the total process of 'TDS CYCLE-MAPPING AND TESTING'
REGARDS
JANA

hai,
the following is the process to get the TDS certificate
TDS Certificate
1.EWT-Basic Settings-Check Recipient type-In-WHTYPE-Rectype-Text
1.Extended WHT Basic Setting-india-define business place- 1000
Enter 1000 as business place and enter description and fill address coloumn.
Assign Business Place to Country Calendar and Day After
Define Section code as 1000 and assign business place and fill address coloumn
Company
Leave on row as blank
Enter TDS circle
Enter TDS No of the company in Search Term ½ and after fillup the address and save it
Extended WHT Posting Certificate numbering for WHT
1.     Define Numbering Class
2.     Define Numbering Group
3.     Define Number Ranges
4.     Assign numbering Group Numbering class
1.Extended WHT Posting-India- Remittance Challan- Document Type
2.Maintain Number Group
Company code Business Area WHT Type Number Group
3.Maintain Number Range for 1,2,3,4,5 under----- text number range from 10001-99999
4.     Assign number range to number group 1-01,2-01,03-01,4-01,5-01
WHT tax certificate for Vendor & Customers
1.     Maintain Number Group and SAP script forms
Company code/Business Place/Offtake Key/form/No.Group
2.Maintain Number Range 2007 0001 -1000
3. Assign Number range to number groups
1-01,2-02 etc.
Pls assign points if it is useful.
Govind.

Develop plugin and test

hello,
I tried to understand the documentation on how to create plugin in acrobat reader, and I think I understand you need the authorization of adobe and I have to pay,
I understand you correctly?
I tried to launch the samples plugins of SDK 9 and after that I set the environment variable demand on the path of the Acrobat Reader plug_ins directory, the file is compiled and copied into the correct directory, but is not loaded by Acrobat Reader X.
How can I create some test before buy what you need any for distribute my software?
thanks.
I have acrobat reader x , win vista and sdk 9.

You can develop and test with Adobe Acrobat (even the trial version).
HOWEVER, as you can NOT ship a plugin for Reader w/o the license from Adobe - you should start that process early - since the license is NOT guaranteed. And you wouldn't want to have spent the time to develop and then not be able to ship...

Need info on BSP tags Test Suite and Test Case

Dear All,
Could any one pls send me some info on the BSP tags Test Suite and Test Case.
Thanks,
Sirisha.

Hi,
I have gone through the sample examples.. for TestSuite and test case.. but im unable to understand it. I need some documentation on the usage of these tags..
Thanks,
Sirisha.

WS-Security: Fail to configure Keystore and Identity Certificates

Hi,
This is my first question here!
I want to set a secure web service, following the guide "Web Services Security Guide" i set up the keystore and Identity Certificates with a keystore that contains two certificates created by me, I set the keys to be used as signature and encryption. Not define any method for authentication.
I deployed the application to the server (oc4j_extended_101350) and up to this point apparently everything went well.
I created a web service proxy to test the web service with jdeveleper, but when I call the web service method the server responds with the error:
java.rmi.ServerException:
start fault message:
Internal Server Error
: End fault message
at oracle.j2ee.ws.client.StreamingSender._raiseFault (StreamingSender.java: 571)
at oracle.j2ee.ws.client.StreamingSender._sendImpl (StreamingSender.java: 401)
at oracle.j2ee.ws.client.StreamingSender._send (StreamingSender.java: 114)
at clientmessageoc4jstda.proxy.runtime.MyWebService1SoapHttp_Stub.getHelloWorld (MyWebService1SoapHttp_Stub.java: 77)
at clientmessageoc4jstda.proxy.MyWebService1SoapHttpPortClient.getHelloWorld (MyWebService1SoapHttpPortClient.java: 42)
at clientmessageoc4jstda.proxy.MyWebService1SoapHttpPortClient.main (MyWebService1SoapHttpPortClient.java: 30)
On the server the following error occurs:
ERROR OWS-04005 error has occurred on port: () http://messagelevelsecurity/ MyWebService1SoapHttpPort: oracle.j2ee.ws.common.soap.fault.SOAP11FaultException: java.lang.NullPointerException.
The client and server are not in the same directory.
The class exposed by the web service is a simple Hello World.
public class HelloWorld {
public HelloWorld() {
public String getHelloWorld(){
return "Hello World";
Thanks in advance
I apologize for my English

I had to add : " outProps.put(WSHandlerConstants.SIG_KEY_ID, "DirectReference");" to the client code and it started working !

Generating and updating URS, FRS and test

Hi folks,
I am trying to find some material in this regard i wanna know what is generating and updating URS, FRS and test script documents
Pls anyhow help me its very urgent
Thanks in advance and waiting for u r answer
prasad

Hi,
More information about the issue....
We are creating the test scripts both manual and automated.
Manual
Using the Tx. STWB_TC, we are creating the manual test cases. While doing so we will provide the test case desctiption
Automated ECATT
using the Tx. SECATT, we are creating the Test Configuration. We are providing description through the documentation option.
The SAP format for both documents is
               &DESCRIPTION&
               &PREPARATION&
               &ENTRANCE&
               &REALIZE&
               &CHECK&
               &FURTHER_HINTS&
But we want the format to be
               <DESIGNSTEPS>
               <INPUTDATA>
               <EXPECTEDRESULT>
               <TARGETSYSTEM>
So we want to update the format / template to reflect the changes.
Please guide us to do so.
Thanks and Regards
Saman

Tables related to test certificate

hi friends,
i am an ABAP consultant now i am developing a smartform for test certificate.
i require data base table where i can get tests that which should be conducted on the material.
for example
tests                                   standard value                        top sample            bottom sample
1.composition of
compartments
2.appearence                  colour less liquid
3.specific gravity            .890
4. TBC content                 redish colouration
5.polymer                        no turbidity
6.%age purity                   99.6% min
like this i have to get the tests of the material and the standard values and the values after test conducted.
i want tables and relations for the above.
than

Dear Venkat
Please find the same
1) QALS - Here you will get the connection between Inspection lot, type, sale order, delivery details
Pass the inspection lot number to these tables to get the actual results and specification
2) QAMR : Characteristic results during inspection processing
3) QAMV Characteristic specifications for inspection processing
Regarding the profile you will get the details in
QCVK Certificate profile header
QCVM Certificate profile characteristic level
QCVMT Certificate profile characteristic level: texts
Regards
Gajesh

Expired encryption and Trust certificates

Suppose:
a Mac OS X 10.8 server shut down for summer,
Linked to Active Directory Win Serv 2008 R2 x64,
Managing Macs and iDevices,
with an encription certificate expired early June 2013
and a Trust certificate expired late August 2013.
1- Do I read correctly that all Macs and iDevice (and Net Boot/Restore/install images) need to be reimaged with the New certificates?
2- Do I unedrstand also that all Update Server's Apple Updates need to be redownloaded. (just read that tonight).
3- What other thing to do in that case and in which order?
4- If nothing very important was done on that OS X server besides being linked to Active Directory and a few test Wikis., it it easier to rinstall from scratch?
==

I'd want a correct, current and valid certificate chain (and would likely set up a private CA, as is my wont), as bad certs can block some sorts of secure network access until either corrected or overridden, and as training the end-users to always "yeah, whatever" with certificate security can potentially lead to... well, other issues.
The software update server will certainly download new and updated changes, but shouldn't need to re-download everything. Disk images will need to be updated.
I'd verify proper local DNS services and correct certs as part of the initial validation of the configuration, yes.
That's entirely your call. Won't really help with the disk images, and will require a re-download of updates.

Output for Quality test certificate

Hi mates
Can anybody help me out in Configuring Output type for Quality test certificate while creating Outbound delivery.
Thanx
regards..,
Karthik

Hi..
Go to QA11 or QA31..
system will ask for Inspection lot.. do the user status(UD completion) wid ststus "A"
and save..
go back and check tab Message type..
hope this will help u...
correct me if i m wrong...
thanks..
mk

Documentation and test - Certificate Crystal

Similar Messages

Maybe you are looking for