Documentation/Example Code for WAPI

Can anybody point me to a place from where i can get Documentation or Example Code for WAPI calls. Especially
SAP_WAPI_START_WORKFLOW
SAP_WAPI_WRITE_CONTAINER.

Similar Messages

Is there example code for using Ni488 and PCI-GPIB card in non controller mode?

Is there example code for using Ni488 and PCI-GPIB card in non controller mode?

cymrieg,
Your code looks good to me. What is the problem? What happens when it fails? What is the IBSTA value on the controller, and at what point in the code does it stop? What is the IBSTA value on the slave, and at what point does it stop?
One thing is that you might not want to call IBCLR() in a loop on the device. At the beginning of the program is fine...This will send a clear command to the device and will clear out any LACS and TACS bits that might be set. Also your IBDEV call shouldn't be in a loop.
Hope this helps, but let me know if you need more information.
Scott B.
GPIB Software
National Instruments

Incoming payments - payment on account example code for 8.8

Hi
Would anyone have example code for SAP B1 8.8 of an incoming payment - payment on account example please
Thanks
Regards Andy

Hi Ed
Thanks
I actually had a problem with my own code but it turned out someone gave me the wrong gl code to use !
Thanks again
Regards Andy

Example codes for each and every class in API

hi,
Is there any place where i can get example code for eacha and every class in java API.
for eample...if i wanna find sample codes for all the clases in java.lang.*
please let me know ASAP.
thanks in advance

Try this
http://www.javaalmanac.com/egs/
It's almost complete, but you could help mr. Patrick Chan to write more samples for the few classes left in the Java API...

Example Code for Routine at Data Target in Info Package.

Hi,
Can any one send the example code for writing the routines at Data Target of Info Package for Deleting the Request from Info Cube after Update.
Thanks in Advance,
Regards,
srinivas

Hi All,
I want to know some examples for guidance in writing the Abap Routine at Data Target of Info Package for Deleting the Request from Info Cube after Update.
In the Data Targets of Info Package for Info Cubes we can delete the previous request based on the Conditions, exceptions and also based on the Abap Routine. I just want to know how do we write the Routine.
This option is adjacent to the Maintain to Data Target in Data Targets of Info Package and will available for Info cube only.
Thanks in Advance,
Regards,
srinivas

Could you provide example code for interactive form

Dear all.
I have got document at link below
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/c2567f2b-0b01-0010-b7b5-977cbf80665d
In that document it has some part of abap code.
Could you have full example code for interactive form online and offline?
Thank you very much.

Hi,
Go to the following link to know more about adobe interactive form.
http://wwwimages.adobe.com/www.adobe.com/enterprise/partners/pdfs/bwp_interactive_forms_adobe.pdf
The following link contains a offline application in ABAP. You can try it.
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/c2567f2b-0b01-0010-b7b5-977cbf80665d
For further questions, check the follow
https://www.sdn.sap.com/irj/sdn/adobe
Improving the Performance of Adobe® LiveCycleu2122 Designer Forms(scripting)
http://www.adobe.com/devnet/livecycle/articles/lc_designer_perf_guidelines.pdf
Interactive Forms Based on Adobe Software: Overview
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/e635e290-0201-0010-a9be-9e8e4ce04770
Adobe Interactive Forms
http://www.saplounge.be/Files/media/pdf/Huberland-Interactive-Forms-2007.10.10.pdf
Taking interactive forms to next level
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/8c103c36-0301-0010-cda8-f6b381bedb6e
Introduction to Adobe PDF Library SDK(PDFL SDK)(Simply scroll the document)
http://partners.adobe.com/public/developer/en/webseminars/PDFL_WebSeminar.pdf
Creating Interactive forms in webdynpro for java
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/5f27e290-0201-0010-ff82-c21557572da1
PDF-Based Print Forms/SAP Interactive Forms by Adobe
http://help.sap.com/saphelp_nw04s/helpdata/en/c8/4adf7ba13c4ac1b4600d4df15f8b84/frameset.htm
Date Objects in Adobe Designer
http://help.sap.com/saphelp_nw04/helpdata/en/dd/60694fddb74ad88cdb7d2a094f3dd2/frameset.htm
Checking and Testing a PDF-Based Print Form
http://help.sap.com/saphelp_nw04s/helpdata/en/c2/1fe9aa4d7b413e8515f90b73729e97/frameset.htm
Architecture
http://help.sap.com/saphelp_nw04/helpdata/en/f2/21021b911f4c0cae11459a4ce0bc62/frameset.htm
http://www.nl4b.com/Adobe/Invitation_SAPBrussels_Q407.pdf
Hope this helps!!
Regards,
Arafat

I want the example code for Calendar() and TimeZone() in java

Hi,
I want the example code for the TimeZone() and Calendar() class in java
because i new to java, i am not able to understand the concepts properly.
Thanks...

Hi Paolo Dema.
What are the exact spefications of your computer?
Also did you computer come with 10.6 ot 10.5?.
You may try entering the MPN (marketing part number) Format: M*****/**
The MPN can be found on the product packaging or the System Profiler.

Example code for each and every class in java API

hi,
Is there any place where i can get example code for eacha and every class in java API.
for eample...if i wanna find sample codes for all the clases in java.lang.*
please let me know ASAP.
thanks in advance

Crossposted here: http://forum.java.sun.com/thread.jsp?thread=570264&forum=54&message=2820774

Is there a reference document(example, code) for developing usb mini port driver?

Hi:
I studied Bus\USB document of WDK. This document forces on developing USB device driver.
And there are some IOCTL Interfaces of usb bus driver exposed to usb device, like IOCTL_INTERNAL_USB_SUBMIT_URB.
But those IOCTL Interfaces seem to belong to USB hub driver(usbhub.sys).
My job is to developing a usb mini port driver, like usbehci.sys. That can work with usbport.sys.
So I should know the communication interfaces(IOCTL...etc) between them and implement these interfaces.
Is there a reference document(example, code) for developing usb mini port driver ?

No there is no reference documents for this, Microsoft stated from the beginning that they own that layer. You really don't want to go there.
Don Burn Windows Filesystem and Driver Consulting Website: http://www.windrvr.com

Awesome Site with Example Code For All Classes

Very cool site that has example code for all the Java classes and APIs. You can submit example code yourself too!
http://www.kickjava.com/

kevjava wrote: Some things that I think would be useful:
Suggestions reordered to suit my reply..
kevjava wrote: 2. Line numbering, and/or a line counter so you can see how much scrolling you're going to be imposing on the forum readers.
Good idea, and since the line count is only a handful of lines of code to implement, I took that option. See the [line count|http://pscode.org/stbc/help.html#linecount] section of the (new) [STBC Help|http://pscode.org/stbc/help.html] page for more details. (Insert plaintiff whining about the arbitrary limits set - here).
I considered adding line length checking, but the [Text Width Checker|http://pscode.org/twc/] ('sold separately') already has that covered, and I would prefer to keep this tool more specific to compilation, which leads me to..
kevjava wrote: 1. A button to run the code, to see that it demonstrates the problem that you wish for the forum to solve...
Interesting idea, but I think that is better suited to a more full blown (but still relatively simple) GUId compiler. I am not fully decided that running a class is unsuited to STBC, but I am more likely to implement a clickable list of compilation errors, than a 'run' button.
On the other hand I am thinking the clickable error list is also better suited to an altogether more abled compiler, so don't hold your breath to see either in the STBC.
You might note I have not bothered to update the screenshots to show the line count label. That is because I am still considering error lists and running code, and open to further suggestion (not because I am just slack!). If the screenshots update to include the line count but nothing else, take that as a sign. ;-)
Thanks for your ideas. The line count alone is worth a few Dukes.

Example code for Trigering a workflow using WAPI from JAVA based tool

Hi Experts,
I am the newest guy in SAP workFlow and BAPI world. I need to trigger a workflow defined in WebFlow engine from a Java client. I know i can use JCo and to use WAPI to get workflow information but i am not sure how it works. Can you give me some example code to trigger one workflow defined in WebFlow using WAPI? If there is any alternative i am interested to know that as well.
Thanks in advance.
Regards,
Riyadh

Use Function Module SWE_EVENT_CReate top trigger event that is linked with a Workflow.
Please reward points if useful
INCLUDE <cntn01> .
DATA:i_emp_details TYPE STANDARD TABLE OF p0001, "Employee Details
 wa_request TYPE p0001, "Workarea for Employee details
 v_country_grp TYPE molga, "Country SubGrouping
 v_object_key TYPE sweinstcou-objkey. "Key for the buisness object ZWOBUSTRIP
CONSTANTS: c_bo_trip TYPE swo_objtyp VALUE 'ZWOBUSTRIP',
 c_event_trip TYPE swo_event VALUE 'TripCreate',
 c_infy_type_1 TYPE infty VALUE '0001'.
Event Container declaration
swc_container i_event_cont.
swc_create_container i_event_cont.
Reading the INFO TYPE 0001 to obtain the
Employee details
CALL FUNCTION 'HR_READ_INFOTYPE'
 EXPORTING
 pernr = i_emp_number
 infty = c_infy_type_1
 begda = sy-datum
 endda = sy-datum
 TABLES
 infty_tab = i_emp_details
 EXCEPTIONS
 infty_not_found = 1
 OTHERS = 2.
SY-SUBRC check is not required as the error
handelling will be done by WorkFlow rule
resolution.
CLEAR wa_request.
READ TABLE i_emp_details INTO wa_request INDEX 1.
IF sy-subrc = 0.
Retrieving the Country SubGrouping for the employee
 SELECT SINGLE molga
 FROM t001p
 INTO v_country_grp
 WHERE werks = wa_request-werks
 AND btrtl = wa_request-persk.
ENDIF.
Sending the relevant data to event container
swc_set_element i_event_cont 'EmpId' i_emp_number.
IF sy-subrc <> 0.
No Processing needed.
ENDIF.
swc_set_element i_event_cont 'PersonnelArea' wa_request-werks.
IF sy-subrc <> 0.
No Processing needed.
ENDIF.
swc_set_element i_event_cont 'CountryGrouping' v_country_grp.
IF sy-subrc <> 0.
No Processing needed.
ENDIF.
swc_set_element i_event_cont 'EmpSubGrp' wa_request-persk.
IF sy-subrc <> 0.
No Processing needed.
ENDIF.
swc_set_element i_event_cont 'EmpTripId' i_emp_trip.
IF sy-subrc <> 0.
No Processing needed.
ENDIF.
Raising the event to trigger the workflow
v_object_key = i_emp_number.
CALL FUNCTION 'SWE_EVENT_CREATE'
 EXPORTING
 objtype = c_bo_trip
 objkey = v_object_key
 event = c_event_trip
 TABLES
 event_container = i_event_cont
 EXCEPTIONS
 objtype_not_found = 1
 OTHERS = 2.
IF sy-subrc <> 0.
No Processing needed.
ENDIF.
COMMIT WORK.
ENDFUNCTION.
Thanks
Arghadip

Need example code for Multiplexer

I have a RTSPServer, MediaServer [based on AVTransmit3] which is sending RTP media packets to a RTPServer [based on AVReceive3]. Now i need to implement a multiplexer in client side. I need at least one example code of multiplexer to start my own implementation. can any one give me any link of a code of multiplexer.
thanx in advance
bye

What doesn't work?
LOB->read can simply be used in a loop. You may be able to print each chunk inside the loop and use http://www.php.net/manual/en/function.flush.php but there are plenty of caveats noted in the flush() documentation
The documentation for LOB->flush is unfortunately ambiguous. "Server" refers to flushing data from PHP to the DB server, not to the web server.
Make sure you bind $id (and also filter your input from $GET): otherwise you have a SQL Injection security problem. Not to mention a scalability issue.

Complete example code for rfc

can anybody give one complete example code for
 1. Synchronous rfc
 2. Asynchronous rfc
 3.Transactional rfc.
i know the theory part. what i wanna complete code for each of the above rfc (not only the calling syntax)with the scenario..
points will be rewarded....

Hi,
Please find a code of : sRFC...(for aRFC and tRFC give me time of 1 week)
1. Server FM Module ( RFC Enabled).
FUNCTION ZRFC_TEST.
""Local interface:
*" EXPORTING
*" VALUE(TEST) TYPE SSTRING
*" TABLES
*" IT_MARA STRUCTURE MARA
Concatenate 'DATE:' sy-datum into TEST separated by ','.
select * from mara into table it_mara up to 100 rows.
ENDFUNCTION.
2. Client Module:
REPORT ZRFC_CLIENT
TABLES: MARA.
DATA: PTEST TYPE SSTRING.
DATA: IT_MARA TYPE TABLE OF MARA.
DATA: WA_MARA TYPE MARA.
CALL FUNCTION 'ZRFC_TEST'
DESTINATION 'DEST_AAAA'
IMPORTING
 TEST = PTEST
TABLES
 IT_MARA = IT_MARA.
WRITE: PTEST.
LOOP AT IT_MARA INTO WA_MARA.
< WRITE: > as per your need.
ENDLOOP.
NOTE: You have to Creat DEST_AAAA using TCODE SM59

How to modify the ni 9237 example code for 3 9237 modules

I am wanting to modify the ni 9237 example vi(for only one module) for three 9237 modules.
I have tried several approaches but it does not seem to work well.
Your help is greatly appreciated.

There are my files. Thanks in anticipation. This code is modified for only 2 ni 9237 modules. I bet it would be a logical extention upon making it work for 2 modules.
Enoch
Attachments:
NI 9237 Getting Started (FPGA).vi ‏148 KB
NI 9237 Getting Started (Host).vi ‏459 KB
NI 9237 Getting Started.lvproj ‏46 KB

Where can I download LabVIEW example codes for NI PCI-6014

I bought an PCI-6014 DAQ device, please tell me where I can download the LabVIEW codes for this device.

Hi,
If you have labview package, you can find lot of examples there.
Start Labview -> Help Menu -> Find Examples-> Hardware input and output -> DAQ -> Here you either you can go to analog input -> then general -> search vi as per your requirement.
Or you can use timer/counter/digital input & output example vi from here.
Hope it helps. Your feedbacks are welcome.
Best Regards,
Nirmal

Documentation/Example Code for WAPI

Similar Messages

Maybe you are looking for