Documentation for Asset Purchase orders and Servicess
Hi,
Plz give me documentation for Asset Purchase orders and Servicess
Hey check it in Building block library
http://help.sap.com/bp_bblibrary/600/BBlibrary_start.htm
Regards,
Raman
Similar Messages
-
Down Payment for Assets Purchase Order and depreciation
I have created one purchase order for assets now when i am making down payment against purchase order it pick up asset and post down payment correctly without depreciation. But when i am clearing down payment against the vendor invoice it is reversing downpayment in asset explorer [AW01N] with Transaction Type 180 and calculating depreciation on reversal amount. I am using down payment spl G/l indicate "M" even i tried with "A".
Can anyone tell me why it is reversing depreciation on downpayment cleared against invoice when original down payment is not calculating depreciation.Hi,
As per as my knowledge is concerned, you should treat the cost element as " Category 90 " , this is a balance sheet account.
Please check at your end.
Thanks
Dasa -
Error when posting invoice for Asset purchase order
Hi,
we are getting the errore message account determination for asset posting with keys not defined in chart of accounts,when posting an invoice for asset purchase order.
Can any one see why this error is coming and what will be the solution.
NageshHi Prabhakar,
Here is the reply,
we have 10 line items,in which 3 items are freight related and other 7 items are related to goods reciept.
i am trying to enter invoice for 3 line items at a time with two relevant to goods reciept and other related to non goods receipt(freight related).
accounting entries generated after the GR are as follows,
asset under construction account,and GR/IR account.
Let me know the details is sufficient or not. -
Automatic account postings (for Intercompany Purchase order and Sales order
Hi all,
I need some help related to the automatic account postings (for Intercompany Purchase order and Sales order)which i can set for the follwoing scenarios. I have looked on the forms and searched alot but not able to a single solution to solve both the pupose. if one scenario works the other doesnt. Please advise.
I have created the master data
Customer receiving--G001
Sales Org.--GXIN
Distr. Channel- 01
Division - 00
Company code receiving - G1
customer supplying- V001
company code for supplying- V1
2 different scenarios
1- Intercompany Purchase order in which a Customer receiving- G001, gets stock replenishment NB purchase order from supplying company V1- GI and GR of stock is done. Biling document for customer receiving G001 is created. But now I need a way to do the opposite side posting at the supplying customer -V001-- this I do using an Idoc which creates a Invoice receipt for creditor(supplying customer) V001.
2. Sales order-- A customer X001 of company code G1 buys stock from the company code V1. the customer G001 of company code G1 bills the customer X001, but the intercompany billing doc/ invoice is created for the customer G001 by company code V1. then now i want an automatic account posting to be created at the supplying customer V001 via idoc.
Can this be achivable via Idoc with automatic account postings.
Please let me know if it doesnt make sense. thanks to all in advance
cheers
JasmeetHi all,
For the Sales order and automatic posting we have created an output type ZR4N- this is creating a batch input session which can be triggered to be processed autmatically.
For the intercompany Purchase order -from Invoice we are creating a different output RD04 (sap standard) which creates invoice receipt at the vendor side.
Rest of the settings are defined using SAP standard functionality within transaction OBCA, OBCB, OBCC, OBCD,OBCE
thanks for viwing the post
Cheers
Jasmeet -
Down payment (F-48) for Asset Purchase Order
Dear Experts,
Please guide me, i am getting one error while doing down payment to vendor through F-48 , I created one asset purchase order, against purchase order making down payment that time i am getting this error message
"You cannot use this transaction type to post to this asset
Message no. AA834
Diagnosis
The transaction type entered belongs to transaction type group 15. According to the specifications for this transaction type group, posting with transactions types belonging to this group are only allowed in specific asset classes (for example, asset classes for assets under construction).
The asset to which you are posting belongs to class 401006 (chart of depreciation WCCD). You cannot post to this class using the transaction type you have entered.
Procedure
Check the asset number entered. You may want to allow posting with this transaction type group for the asset class of the asset. "
my asset is plant and machinery, any configuration is required.
as per my knowledge i checked in T.code : OAYB transaction type groups 15 only assign AUC asset class and Capital Advance. In account determination balance sheet accounts there is Acquistion : Down payment and Clearin G/lL for Down payment g/l a/c not assign .
SAP F1 help in that field (above said) is saying that only for AUC.
Please guid me , What to do.
Thanks & Regards
ChanduHi Chandu,
Can youplease confirm the the Asset Class (the one linked to the asset you are using for carrying out down payment with T.Code F-48) has been set-up in configuration as an AUC asset class. Check on T.Code OAOA for the radio button selected for Status of AUC.
In case your Asset Class - which is Plant & Machinery - has been set up as "No AuC or summary management of AuC" i.e. has been set-up as a final asset class then you will get the error.
Solution Options:
(1) Either change the Asset Class set-up (using T.Code OAOA).
Please note - you might not be permitted/able to do this if the system already has posted transactions for this asset class.
(2) Carry out the downpayment for an AUC Asset (create an AUC Asset using T.Code AS01). Carry out F-48 for this. Later settle this AUC asset to the required/relevant final asset (using T.Codes AIAB and AIBU).
(3) Specify your Asset Class as available for carrying out DownPayment transaction. Use T.Code OAYB and for Transaction Type Group 15, include/add a new entry for your asset class.
(4) Ensure that the Account Determination linked to you asset class (check this in T.Code OAOA) has been correctly and adequately set-up for GL account determination (use T.Code AO90).
Hope this helps.
Regards,
Ruchi -
Table for open Purchase order and pending invoices for vendors
Hi,
Are there any table to know open Purchase orders and pending invoices for vendors.
Quick response will be appreciated.
Thanks & Regardshi,
Purchase Order:
S011:(PURCH: Purch. Group Statistics)
Statistics (SSOUR)
Version (VRSIO)
Month (SPMON)
Day (SPTAG)
Week (SPWOC)
Posting Period (SPBUP)
Purchasing Org (EKORG)
Purchasing Group (EKGRP)
Vendor No (LIFNR)
S012: (PURCHIS: Purchasing Statistics)
Statistics (SSOUR)
Version (VRSIO)
Month (SPMON)
Day (SPTAG)
Week (SPWOC)
Posting Period (SPBUP)
Purchasing Org (EKORG)
Purchasing Group (EKGRP)
Material No (MATNR)
Plant (WERKS)
Info Record Category (ESOKZ)
Material Group (MATKL)
Info Record (INFNR)
Country (LAND1)
EINE: (Purchasing Info Record: Purchasing
Organization Data)
Info Record (INFNR)
Purchasing Org (EKORG)
Info Record Type (ESOKZ)
Plant (WEKS)
EKET: (Delivery Schedules)
Purchasing Doc (EBELN)
Item (EBELP)
Delivery Schedule (ETENR)
EKPO: (Purchasing Document Item)
Purchasing Doc (EBELN)
Item (EBELP)
EKKN: (Account Assignment in Purchasing
Document)
Purchasing Doc (EBELN)
Item (EBELP)
Account Assignment (ZEKKN)
EKKO: (Purchasing Document Header)
Purchasing Doc (EBELN)
EORD: (Purchasing Source List)
Material No (MATNR)
Plant (WERKS)
Source List No (ZEORD)
thx,
Ganpat -
Release Strategy for Asset Purchase order
Hi,
I have the following client Requirement.
1. PO document type will be anything but Po created is for Asset
2. In such case, Release strategy should be approved only be certain groups only. Anyway the Account assignment category will be "A"
As we cannot control the PO Release by Account Assignment category, it has to be controlled via User Exit.
I.e., combination of Acc Assignment category and Purchasing Group should result in a particular strategy.
Can you suggest relevant user exit? This is importantly needed. Please help.
ThanksHi,
Please do the following changes,same is tested by me in Our dev server and works successfully in PO.
Go to Se11 ,open structures -CEKKO (You will find KNTTP-account assignment field is missing)
Click on append structures ,system will ask you object name ,give as anything,then put a description /
Then system will ask you to add new field in CEKKO structures.
Add field KNTTP and save ,system will generate request for the same.
Now create a characteristic as CEKKO_KNTTP and save ,don't give table name here
Once saved,re-open the CEKKO_KNTTP ,here you need to give table name as CEKKO and field name-KNTTP. Define values an save.
then add the same in class ,and then select the required assignment in CL20N ,save.
And check the PO effects,it will works.
Regards,
Sandesh Sawant -
Open Purchase Orders and Open Sales Orders
Hi,
Please let me know the table names for open purchase orders and sales orders.
Regards,
PriiHI Priti,
EKPO-ELIKZ "Delivery completed" indicator, This tell if the given PO line items has any open quantity or not.
Logic to find out if a given PO has Open Quantity or not is do the following:
" select the PO Qunatity.
SELECT SINGLE MENGE FROM EKPO INTO PO_QTY WHERE
EBELN = ITAB_PO_LN-EBELN AND
EBELP = ITAB_PO_LN-EBELP.
" select the GR qunatity which has been received.
SELECT SUM( MENGE ) FROM EKBE INTO GR_QTY WHERE
EBELN = ITAB_PO_LN-EBELN AND
EBELP = ITAB_PO_LN-EBELP AND
BWART = '101'.
" select GR Quantity which has been reversed.
SELECT SUM( MENGE ) FROM EKBE INTO GR_REV_QTY WHERE
EBELN = ITAB_PO_LN-EBELN AND
EBELP = ITAB_PO_LN-EBELP AND
BWART = '102'.
POSTED_QTY = GR_QTY - GR_REV_QTY .
OPEN_QTY = PO_QTY - POSTED_QTY.
Regards,
-Venkat. -
HOW WE FIND OUT OPEN PURCHASE ORDER AND CLOSED PURCHASE IN THE TABLE?
HI,
PLZZ HELP ME.
what are fields names for open purchase order and closed purchase order
thanksHi param,
Go to mseg table, pass the purchase order number and purchase order item. if the mseg-menge = ekpo-menge for the corresponding purchase order then consider the purchase order is close, else it is still open. even check if the entries are not there for corresponding purchase order in mseg table then also it is open.
select mblnr zeile matnr menge from mseg into it_mseg where ebeln = it_ekko-ebeln
and ebelp = it_ekpo-ebeln.
if sy-subrc <> 0.
then consider the purchase order is open.
This is the first case.
even u can consider like this
if sy-subrc = 0.
if it_ekpo-menge > it_mseg-menge.
then also the purchase order is open.
Regards,
Santosh Kumar M.
Award points if it is useful. -
Hi all
Is there a report I can run that will show me all Purchase Orders and the Invoices posted against these P.O.'s. If there isnt can I create areport via SQVI and wjat tables must I join together.
Thanks
VishnuHi Vishnu,
The simplest SQVI you can define for showing purchase orders and their invoices is with tables <b>VBRP</b> and <b>VBFA</b>. VBRP shows the basic information about the invoice items, and VBFA (document flow) shows basic info about the documents in the chain up to the invoice (for instance PO's.) You can later expand your report with EKKO and other tables.
I hope this tip was useful to you.
Best regards //Georg -
Add restriction while create item by "Old Purchase Orders and Templates"
We are consider to add restriction while create shopping cart item by "Old Purchase Orders and Templates". After implement such restriction, create item by copying old shopping cart item is not allow for particular matereial group number.
Is there any BADI can be used in our case? If there is no, could modify HTML template the only solution?
Regards,
DonaldHi,
If the restriction is for certain group of people,then you have 2 options:
1.Make the link invisible for those group of people by implementing the BADI BBP_SC_MODIFY_UI.In the BADI,first check the user attributes like particular role and based on that make the link invisible.
2. Assign certain role to the group of users who should not see the link "Old Purchase order and templates".You can hide this link in the MENU by removing this from the lits of trasctions in that particular role.In PFCG,go in that role and then under MENU tab,remove the entry for "OLD PURCHASE ORDER AND TEMPLATES".
BR,
Disha.
Do reward points for useful answers. -
How to link asset with purchase order and PO Item.
Hello,
I have to generate a report which contains columns
Asset No , po no(ebeln) ,PO Item(ebelp),Material no etc
My query is how to link asset with purchase order and PO Item.
I am selecting asset and po no. from anla but how to get
po item no(ebelp)?
po line item is important in this report because every line item has differrent asset and material no.
i tried to match asset no in mseg table but i am not getting asset no in mseg .
how should i proceed ?Thanks Thomas & Srimanta for the quick response.
When I checked EKKN table by entering PO there is no asset no. in anln1 field.
Also I would like to add that, In me23n for a PO, account assignment category we are entering 'F' for internal order settlement.
Where can i find the link between asset and po no(ebeln) and po item(ebelp)?
Regards,
Rachel
Edited by: Rachel on Aug 11, 2008 7:23 AM -
Not Possible to Process Goods Reciept for an Asset Purchase Order.Pl. Help!
Dear All,
I m not able to do Goods Reciept for a Purchase Order . It is an Asset P.O.As i wants to Process Goods Reciept am getting a System Message in task Bar as --> "No Goods Reciept Possible for Purchase Order
XXXXXXXXXX. Message No. M7036.
Can ne one please help me what to check in this P.O , The Message generated is not an Error it is a Message in task bar with Green Tick, Hope you got it.
Please Help ,
Rgds n thanx in advance.
sap11Hi,
Following could be the possible reasons for this message:
o The purchase order contains no items in the specified plant. - If you have specified plant in MIGO Screen, remove it and keep it blank, let system determine it from PO.
o The item specified does not exist. - If you are entering PO line item in MIGO screen then keep it blank and let it get determined form PO
o Currently, the scheduling agreement has no open schedule lines, or the schedule lines have not yet been transferred. - This is applicable in case of GR against Scheduling Agreement
o The item category of the purchase order items in the plant does not allow goods receipts. - Check the Item Category in PO, it should be blank.
o The purchase order items in the plant have been deleted or are blocked.
o For confirmation control for the order item(s) to be carried out, a confirmation (shipping notification) must have been received. This has not yet been entered. - Check under "Confirmations" Tab in PO whether any confirmation control key has been specified or selected wrongly. If yes then either create Inbound delivery in VL31N and then do MIGO or remove the Confirmation Control Key from PO ans Save and then do MIGO. -
Report for Purchase orders and deliveries
Hi all,
Is there any report in SAP that gives me the list of purchase orders and the deliveries associated with those PO's.
Please advise.
Thanks in advance
SruthiHi,
What kind of delivery are you looking for ??
If it's inbound delivery, use VL06I tcode & for outbound, try VL06O
Thanks & Best Regards,
Devendra Gaware
PS - Reward if found useful. -
Report for purchase requisition, purchase order and schedulling agreement.
Hi, thanks for your help.
I need a report or query just to view in one screen the related docs. as purchase requisition, purchase order and schedulling agreement.
I don´t know if there is a table or trx. with that information.
Is it possible to get that information via query ?
Thanks for your help.
Regards.For PR and PO you can use ME5A
For PR and Scheduling agreements also you can use ME5A.
Maybe you are looking for
-
In dev server my payment advice form f110_prenum_chc is not working
hi, friends i need urgent help. 1) i have copied f110_avis_in frm 000 client to 200 client with form name z_prenum_dup. 2) i have copied f110_prenum_chc frm 000 client to 200 client form name zf110_prenum_chc1. 3) then i modified my both forms i
-
Tab bug in Pages − Some complex-script characters collapse all tabs on a line.
This problem is somewhat serious, since it basically turns tabs into spaces on any line that contains certain very common characters in Devanagari. Basically, if you take the following text: "Hindi हिन्दि Hindi हिन्दि" ...it will render i
-
WLC 5508 v 7.2 - AP1131 / 1131AG
Hi all, after replaced an old 4xxx controller with a new 5508 (AIR-CT5508-50-K9) the old AP and the new one stops to join. In particular the new ones (AP1131 / 1131AG with S113RK9W-12311JX) join the WLC, download an image (I think the full LWAPP imag
-
One apex application, multiple different users
Hi all, I'm developing an application that will be used by multiple different companies, all with their own data. As far as I can see, there are three different approaches for this: - make different applications with different schemas in apex, for ea
-
HT2106 how to import pics from iphone to computer?
How do I import pics from my Iphone 4gs to my computer?