Documentation for getting Webcenter PS4 to work with Exchange Server 2010.

I have a customer who has Microsoft Exchange Server 2010 and wants to have their e-mail in WebCenter Spaces app we have built, using 11.1.1.4 or 11.1.1.5. Do either of these support Xchange Server 2010? Probably not, right? Well has anybody done it and been able to get it to work? Is there any documentation out there that tells how to do it?
Thanks,

This documentation is great. Thanks,
Is there any documentation on this for 11.1.1.6? (PS5)? The documentation you gave me is 11.1.1.5 and it shows Exchange Server 2007. My customer has Exchange Server 2010. Do you know if 11.1.1.5 and/or 11.1.1.6 supports Exchange Server 2010?
Again, thanks for your help.

Similar Messages

How do I get macmail to work with exchange server 2010?

my company upgraded to exchange server 2010 and since then, I can't access ical shared calendars. I've been forced to switch to Outlook for my email client at work. Now I can't receive email at home using macmail. Is there a way for macmail to work with exchange server 2010?
Intel tower running snow leopard 10.6.8 with the latest version of macmail.
Any insight into this problem is greatly appreciated.
Thanks very much.

Hi,
Please refer to the following link http://forums.adobe.com/docs/DOC-3581
For changing the HTTP, you need to do it outside the muse after exporting the site or after uploading it to godaddy.
Regards,
Aish

How to : Configure Project Server 2010 to work with Exchange Server 2013

Hi everybody. I have a problem. I did integration success project server 2010 with exchange server 2010. But now my customer use exchange server 2013. So my question is "Have a way to integration project server 2010 with exchange server 2013 ?"

I haven't seen any document with Project 2010 and Exchange 2013. You could still try the old document with Project 2010 and Exchange 2010.
http://technet.microsoft.com/en-us/library/ff468700(v=office.14).aspx
It might just work.
Thanks Gaurav Wason MCITP, PMP

All sub-folders in Mac Mail cannot synchronize with Exchange Server 2010

Hi all,
All sub-folders under Inbox in Mac Mail cannot be synchronized with Exchange Server 2010. There are 2GB messages size in Inbox folder and 500MB messages size under Inbox's sub-folders. All messages can be sent out and received and it can work in Outlook 2007 and Outlook 2010 normally. However, all messages in sub-folders cannot be synchronized (empty sub-folders).
Does this problem relate to message synchronization order of Mac Mail with Exchange Server? Do all sub-folders messages be synchronized after synchronization complete of Inbox? The synchronization of sub-folders will not happen if the synchronization of Inbox does not complete, doesn't it?
All messages synchronization is over internet. Can anybody help?
Thanks a lot
DT1640759

Hi,
1.please check the mailbox send and receive quota for exchange 2013 migrated mailbox.
2.Please check the email attributes of the exchange 2013 migrated mailbox because it seems to be a problem with that particular mailbox.
3.Then do the message tracking and that would be the only way to find the where the send messages has gone.
4.Please check and confirm you have an enough space on the disk where exchange queue database is residing.
I think I need to create a receive connector in the 2013 to receive from 2010 ?
No need ,by design exchange 2013 cas server default frontend receive connector will be having an
entire ipv4 and ipv6 segment and anonymous connection is checked by default.
I think I also need to create a send and receive connector for 2013 users to each other?
No need , an intra organisation send connector and the default receive connectors in exchange will be used
for internal mail flow between the exchange 2013 users.
Please reply me if you have any queries .
Regards
S.Nithyanandham
Thanks S.Nithyanandham

KB953804 for delegatesentitemsstyle in Outlook 2003 in combination with Exchange Server 2010 SP1 not working.

KB953804 Full title "Hotfix for An e-mail message does not appear in a user's mailbox if the e-mail message was sent on behalf of the user by a delegate in Outlook 2003."
We have this working for ok Outlook 2003 SP3 in combination with Exchange Server 2003 SP2. Now for mailboxes that are moved to our new Exchange 2010 environment the hotfix stopped working. The sent items get stuck in the outbox of the delegate instead
of moving to the user in whose name the mail was sent. It does not matter if the user mailbox is on 2003 or 2010 as long as the delegated user is on Exchange 2010 SP1 it fails. We use Outlook 2003 SP3 in online mode. Does anyone know how to fix this
or maybe someone knows an alternative way to move the mails to the sent items with Exchange2010 SP1.

Hi,
I'd like to know how did you set "send on behalf",from outlook give delegation permission or from Exchange Server give "send as" right?
Please try to use get-adpermission to verify if the user has "send as" right.
Manage Send As Permissions for a Mailbox
http://technet.microsoft.com/en-us/library/bb676368.aspx
Note: After you grant send as right, please try to restart Microsoft Information Store.
By the way, do you receive any NDR or error information when you send on behalf of others?
Xiu

Mail Delivery betweek Exchange Server 2013 co-existance with Exchange server 2010

Hello Guys
I have a mailflow issue, hoping someone can help with detail description, below is the setup
Exchange server 2010 SP3 with all roles in one server
Exchange server 2013 SP1 with CU6 with all roles in one server - this server is in a different subnet to the 2010 server. I am able to see exchange 2010 databases and mailboxes from Exchange 2013. For testing purposes, I have moved 3 mailbox from 2010
to 2013. These 3 mailbox, is able to send and receive email from Internet but to each other via OWA or Outlook. These 3 mailbox also not able to send to receive email from any mailbox that is still in 2010 server via OWA or Outlook. I am not planning the whole
server cutover in a go and planning to do state by stage mailbox migration so I need mailflow working properly. When I send an email from one of the migrated mailbox that is in 2013 server, I can see that the email leaves the mailbox outbox and sits in the
queue ..
Can someone please provide detailed solution what needs to be configured?
MCITP, MCSA, MCSE,VCP - Consultant, Solution Design, Implementation

Hi,
1.please check the mailbox send and receive quota for exchange 2013 migrated mailbox.
2.Please check the email attributes of the exchange 2013 migrated mailbox because it seems to be a problem with that particular mailbox.
3.Then do the message tracking and that would be the only way to find the where the send messages has gone.
4.Please check and confirm you have an enough space on the disk where exchange queue database is residing.
I think I need to create a receive connector in the 2013 to receive from 2010 ?
No need ,by design exchange 2013 cas server default frontend receive connector will be having an
entire ipv4 and ipv6 segment and anonymous connection is checked by default.
I think I also need to create a send and receive connector for 2013 users to each other?
No need , an intra organisation send connector and the default receive connectors in exchange will be used
for internal mail flow between the exchange 2013 users.
Please reply me if you have any queries .
Regards
S.Nithyanandham
Thanks S.Nithyanandham

Mac Reminder (Mountain Lion) cannot sync with Exchange Server 2010

Hi All,
My boss is using iMac reminder (Mountain Lion), iPhone and iPad sync with his Exchange Server account, He cannot sync Mac reminder with Exchange Server last week. However, there are no sync problem of iPhone, iPad and the other iMac.
My boss mail to me 'Just noticed that my iMac reminder is not in sync with the server. IOS device is in sync though. Tried unchecking calendar+reminder on account setup and rechecking but still no good. Any ideas?'
Could anyone help me?
Thanks,

Started experiencing this same issue with new Macs on Moutain Lion connecting to MicroSoft Exchange Server.
ERROR Says:
Calendar can't save the event "event name here" to the Exchange server.
The account "describes calendar name" currently can't be modified. to discard your changes and continue using the version of your calendars that's on the server. click Revert to Server.
Then gives the buttons "Revert to Server" "Try Again" or "Ignore"
!!! Somehow it seems like this is a known issue, otherwise WHY would Apple have given us those 3 buttons to click on?
Needless to say this is causing productivity problems as it disrupts the very busy schedule of many users. Apple needs to provide some workaround for this.

Search in Outlook 2010 with Exchange Server 2010 doesn't work properly

Hi all,
I have a problem with a clients Exchange 2010. Search function in Outlook 2010 doesn't work properly, the employee can't search mails and contact - he doesn't get any result :-(
In application syslog/protocol I get this error:
Function 'CISearch::EcGetRowsetAndAccessor' found, content indexing for database 'Mailbox Database 0139257080' caused by MSSearch-Error '0x80041820' deactivated
Can anybody help me with this, if its necessary I can give further information :-)
Thomas
Thomas Deinert

Hi,
What’s Exchange Version? Sometimes, after Installing Exchange 2010 SP 1, Searching via OWA or Outlook Online Mode may Fail. If so, please try the following solution:
Download the script
Repair-ExchangeSearchSymlinks.ps1 from the Script Center.
Copy the Repair-ExchangeSearchSymlinks.ps1 script to the Scripts directory on the Mailbox server (default installation is C:\Program Files\Microsoft\Exchange Server\v14\Scripts).
On the afflicted Mailbox server, open the Exchange Management Shell by right-clicking the shortcut and selecting “Run as Administrator”.
Within the Exchange Management Shell, navigate to the Exchange Scripts directory.
Within the Exchange Management Shell, run the following script: .\Repair-ExchangeSearchSymlinks.ps1
Within the Exchange Management Shell, run the following script (without the symbols [] and substitute the database name(s) for any databases you wish to reset: .\ResetSearchIndex.ps1 [-force] <dbname> [<dbname>]...
You will receive an Event ID 109 when the rebuilding of the index starts for each database and an Event ID 110 for each database when the index rebuild has completed.
After receiving Event ID 110 for each database, test to make sure search functions correctly with both OWA and Outlook operating in Online Mode.
Similar thread:
https://social.technet.microsoft.com/Forums/exchange/en-US/35db030c-277f-49d6-83d6-772f839a47f8/owa-2010-sp1-search-problems?forum=exchange2010
Best Regards.

Mac performance with Exchange Server 2010 SP1

Hi All,
I have some issue with Mac OS X 10.7.2 performance with when setting up new email connection Microsoft Exchange Server.
1) Use Apple Mail to create a new EMAIL account for an Exchange Account using Auto discover. Note how long it takes. In my case, it takes almost two full minutes or more until it comes back and is fully set up (and starts synchronizing the server folders).
2) Now use Apple mail create a new EMAIL account MANUALLY -- just don't fill in the password... keep hitting Continue until it shows the POP setting. Select EXCHANGE and then fill in the appropriate details (mail.mydmain.com, check SSL enabled, etc.). Setting up an account this way takes only a few seconds.
3) Use Microsoft Outlook 2011 for mac to create new Email account for an Exchange using Auto discover. it takes few second to completed.
I can summarize that:
- Use Apple Mail to create a new EMAIL account for an Exchange Account using Auto discover: Slow
- Use Apple mail create a new EMAIL account MANUALLY: Normal
- Use Microsoft Outlook 2011 for mac to create new Email account for an Exchange using Auto discover: Normal
In any case, do you have any solution to fix this issue.

Hi,
I'd like to know how did you set "send on behalf",from outlook give delegation permission or from Exchange Server give "send as" right?
Please try to use get-adpermission to verify if the user has "send as" right.
Manage Send As Permissions for a Mailbox
http://technet.microsoft.com/en-us/library/bb676368.aspx
Note: After you grant send as right, please try to restart Microsoft Information Store.
By the way, do you receive any NDR or error information when you send on behalf of others?
Xiu

Mac calendar (Mountain Lion) cannot accept an invitation with Exchange Server 2010

Hi all,
My boss are using Mac calendar (Mountain Lion) sync with his Exchange Server account, User sent him an invitation. When he tried to accept all invitations, an error message appear:
Your calendar couldn't be refreshed. There was an unexpercted error with the request (domain EWSExchangeWebServicesErrorDoma / error 285)
Could anyone help me to solve?
Thanks

Started experiencing this same issue with new Macs on Moutain Lion connecting to MicroSoft Exchange Server.
ERROR Says:
Calendar can't save the event "event name here" to the Exchange server.
The account "describes calendar name" currently can't be modified. to discard your changes and continue using the version of your calendars that's on the server. click Revert to Server.
Then gives the buttons "Revert to Server" "Try Again" or "Ignore"
!!! Somehow it seems like this is a known issue, otherwise WHY would Apple have given us those 3 buttons to click on?
Needless to say this is causing productivity problems as it disrupts the very busy schedule of many users. Apple needs to provide some workaround for this.

How to get studio 2 to work with app server 8.1 ??

I'm about giving up.
I have tried to redeploye, to export to war
to recreate the domain (pe-start.bat -reset )
and nothing helps ... appserver at 24848 is not to be started from within
studio 2?. so run/debug is imposible.
I seems confused bout address ( which is not blocked)
or spaces in path ( what ??? it is a ";" delimited list !!)
or it simply does not know about the projects in the studio
(domain xml does not reference any of the projectes (?).)
Is creator2 usable at all ?
Worst of all ... the redo of the domain also killed of the project that was running --- outside of studio2.
the apps disappeared from within domain.xml and cannot be recreated
( F***).
And deploying the war to appserver 8.1 through the admin console is ....
not working .
That is days work out the window.
ERik.

1: windows xp pro
2: f:\sun\creator ....
c:\documents and ....First questions:
Did you install Creator as the same user as which you're trying to run it?
Did you try to install it into multiple places? And possibly trying to use the old user directory (C:\Documents and Settings\<user>\.Creator\2_0 - where Creator keeps it's state)?
3 a: no modification
b: manually inserted project "descriptors"
c: redo : pe-startup.bat -reset
d: deploying projects through admin console
(export war-file)There you're missing the WEB-INF/sun-web.xml. That's the reason for all the server.log entries related to JNDI names beeing null.
: inspection shows :
1: path warning - tried to insert single pings
|2006-04-24T22:56:13.375+0200|WARNING|sun-appserver-pe
8.1_02|javax.enterprise.tools.launcher|_ThreadID=10;|L
AUNCHER005:Spaces in your PATH have been detected.
The PATH must be consistently formated (e.g.
C:\Program Files\Java\jdk1.5.0\bin; ) or the
Appserver may not be able to start and/or stop.
Mixed quoted spaces in your PATH can cause problems,
so the launcher will remove all double quotes before
invoking the process. The most reliable solution
would be to remove all spaces from your path before
starting the Appservers components. |#]
That's a misleading message of the application server:-( Most of the time there is nothing wrong:-(
2: jndi missing name
2006-04-24T23:26:41.203+0200|INFO|sun-appserver-pe8.1_
02|javax.enterprise.system.container.web|_ThreadID=10;
|WEB0100: Loading web module [logoplus1] in virtual
server [server] at [logoplus1]|#]
[#|2006-04-24T23:26:41.203+0200|SEVERE|sun-appserver-p
e8.1_02|javax.enterprise.system.container.web|_ThreadI
D=10;|WEB0123: WebModule [logoplus1] failed to deploy
and has been disabled:
[javax.naming.InvalidNameException: Real JNDI name
cannot be empty for jdbc/LogoFlex].|#]
[#|2006-04-24T23:26:41.203+0200|INFO|sun-appserver-pe8
.1_02|javax.enterprise.system.container.web|_ThreadID=
10;|WEB0100: Loading web module [Insort] in virtual
server [server] at [Insort]|#]
[#|2006-04-24T23:26:41.218+0200|SEVERE|sun-appserver-p
e8.1_02|javax.enterprise.system.container.web|_ThreadI
D=10;|WEB0123: WebModule [Insort] failed to deploy
and has been disabled:
[javax.naming.InvalidNameException: Real JNDI name
cannot be empty for jdbc/LogoFlex].|#]Were those related to your Export War -> deployment attempts? You would have to create the JDBC resources/connection pools by hand and add a WEB-INF/sun-web.xml with the right information to be successful in that case. See http://developers.sun.com/prodtech/javatools/jscreator/learning/tutorials/2/appserverdeploy.html for more.
>
5: yes and there seems to be NO solution
I also noticed that the studio2 do not try to
shutdown the running appserver. and seems to beYes, Creator does not shut down the application server (or DB) when the user stops it.
baffled seing it started (?) Normally Creator connects just fine to a running PE?? What kind of problems do you see?
Thanks,
-- Marco
>
ERik

Can't get Google CAL to work with iCAL "Server with a secure communication unavailable"

I can't add my google account to iCal...
Error message:
"Server with a secure communication unavailable"
"Your calendar acct isn't on a server that can receive your calendar information securely.."
I have had this work just fine in the past, had to remove my accounts a while back, decided to add them back, and this error keeps popping up...
Can anyone help??
Googled and Searched this forum with no success. Found some suggestions but nothing worked.
Thanks,

I have used the CalDAV option from the pop list and the server option is : https://www.google.com/calendar/dav/[email protected]/user , replace with your email the underlined
I've found this here .

Iphone does not work with exchange server 2003

keeps saying server not found....

You have to activate Exchange ActiveSync for each user's mobile device. This is done by the IT folks in the back office.
http://www.google.com/url?sa=t&rct=j&q=&esrc=s&frm=1&source=web&cd=4&sqi=2&ved=0 CDwQFjAD&url=http%3A%2F%2Fimages.apple.com%2Fiphone%2Fbusiness%2Fdocs%2FiPhone_M S_Exchange.pdf&ei=API8UN6UCIiB6AGzgoHYDw&usg=AFQjCNHykbMLl4i_zgFoN2AAF6P5ucjrow

Best practice for creating a new email address to Exchange Server 2010 for share point Library

Hi,
Please advise if there is any best practice for the above issue?
Thanks
srabon

Hi Srabon,
Hope these are what you want.
Use a cmdlet to Create a User account and Mailbox in Exchange 2010
http://technet.microsoft.com/en-us/magazine/ff381465.aspx
Create a Mailbox for an Existing User
http://technet.microsoft.com/en-us/library/aa998319(v=exchg.141).aspx
Thanks
Mavis
Mavis Huang
TechNet Community Support

Palm Pre does not Sync with Exchange Server 2010

Only folder architecture visible. No content. Is there a fix coming or workaround available?
Post relates to: Pre p100eww (Sprint)

This was reported recently in this thread:
Pre and Exchange 14
http://forums.palm.com/palm/board/message?board.id=wireless_email&message.id=8867

Documentation for getting Webcenter PS4 to work with Exchange Server 2010.

Similar Messages

Maybe you are looking for