Documentation for Governance Risk and Compliance Applications Suite

Hello,
Can someone please point me the location where to download install guide of Governance Risk and Compliance Applications Suite.
I check http://www.oracle.com/technology/documentation/grccs.html but download page takes me to a blank page.
Thanks.

Pl check again - your link takes me to the doc website without issues
HTH
Srini

Similar Messages

Clarifying the need for Governance Risk and Compliance in Defense

Since Defense organizations must deal with managing internal compliance efforts and are continually challenged to provide clear evidence of internal controls to stakeholders (executives, legislators, constituents) I beleive there is a need by these organizations to leverage governance, risk and compliance solutions that can help them manage these activities...
I want to put out a call to the community to see where you may see the need beyond the areas I mentioned above for governance, risk and compliance in Defense

Hi Dante,
You are correct; showing compliance is a key driver behind Defense organizations choosing GRC products. However, your question isn't as easy as providing you with a list of standard reasons for investing in GRC. What is required is an understanding of each discipline; Governance, Risk and Compliance, and translating these areas into real business scenarios for the customer. In your example, Compliance is only one aspect in GRC. The Public Sector is open to discussions on Governance and Risk as well. These organizations establish strategy/policy just like the private sector (Governance), and need to use tools/practices like Risk Management to identify and address threats to their objectives. Hope this helps. Dan

Where can I download EGRCM8.0(Governance, Risk and Compliance Manager)

hi all, i would like to know where I can get EGRCM 8.0(Enterprise Governance, Risk and Compliance Manager)? i can't find it in the Download page.

Have you tried http://edelivery.oracle.com ?
HTH
Srini

Governance, Risk, and Compliance

Hi experts,
I am very new to this module. Can anyone provide some material nd s/w regarding this module? one morethng i dnt have assistance like where to strt nd all dat...can anyone help out pls?
Is this related to QM module?and please guide me hw to handle this?
Thanks & Regards
Jani Basha Sk
Edited by: jani sadasivan on May 6, 2010 2:37 PM

Hello Jani,
Kindly visit the BPX page for GRC using the link below. here you will find links to other resources related to GRC.
[http://www.sdn.sap.com/irj/bpx/grc?language=en]
You can find the Various How-To Guides for GRC on the link below
[http://wiki.sdn.sap.com/wiki/display/BPX/Governance%2CRisk%2CandCompliance%28GRC%29How-ToGuides]
For application help for GRC kindly refer to the link below
[http://help.sap.com/saphelp_grcac53/helpdata/en/45/92c7fa00494714a4162ad707d9b328/frameset.htm]
Please try to explore the BPX page for GRC and you will find many resources related to the same. The software you can get from SAP Service Market Place.
Regards, Varun

SAP Governance, Risk, and Compliance groups on LinkedIn

SAP has created GRC groups on professional networking site Linkedin. GRC community members are encouraged to join the groups [SAP BusinessObjects Access Control|http://www.linkedin.com/groups?gid=2242896&trk=anetsrch_name&goback=.gdr_1272963580804_3], [SAP Business Objects Global Trade Services|http://www.linkedin.com/groups?gid=2242865&trk=fulpro_grplogo&goback=.gdr_1272963580804_3.anb_2242865_2], [SAP BusinessObjects Process Control|http://www.linkedin.com/groups?gid=2242885&trk=fulpro_grplogo&goback=.gdr_1272963580804_3.anb_2242865_2], and [SAP BusinessObjects Risk Management|http://www.linkedin.com/groups?gid=2242889&trk=fulpro_grplogo&goback=.gdr_1272963580804_3.anb_2242865_*2].

Hi Pradeep,
As of my knowledge, there is no Certification currently available for any of the component for GRC ACPCRM. So can check the below links to know more on SAP GRC.
Link: [http://help.sap.com/content/bobj/sbu/docu_sbs_grcpc_design.htm#] and also
Link: [http://www.sdn.sap.com/irj/bpx/grc] as suggested by Raghu.
Thanks,
Guru

First I got a wrong password for the network and the application error after a while that I wanted to enter the correct password no longer have access to network settings

First I got a wrong password for the network and the application error after a while that I wanted to enter the correct password no longerhave access to network settings

Unfortunately, it says I can't delete anything without the missing password.

How to create documentation for report programs and how to use it

how to create documentation for report programs and how to use it in the selection screen by placing an icon in the Applicatin Tool bar. If i click this icon the help documentation has to display.
Note: Exaple <b>RSTXSCRP</b> programs selection screen

Hi
1 goto SE38 transaction, give the program name
2 Click on documentation radiobutton & then press change
3 Write your PURPOSE, PREREQUISITES etc details
4 Save the same & Activae it.
The icon will come automatically on selection screen
Thanks
Sandeep
Reward if useful

Standard Documentation for Add-on and Add-on's Data Base?

Hi!
I'd like to know if there is a stantard to create documentation for Add-On and Add-On's Data Base to get the Add-On's Certification.
Thanks!
William

> When applying add-on images to our base the primary MSI's install just
> fine but none of the MST's and MSP's do not apply.
I meant to say that none of the MST's and MSP's apply. Sorry about that.

Why system is capturing Log for Document transfer and Compliance check

Hi All
Although I have removed
TD_MAP Movement Data : Document Replication Mapping (Live)
TD_CCH Movement Data : Compliance check Document (Live)
in custom document configuration , then also system is capturing log for document transfer and Compliance check result.
If my understanding is wrong then what is the use of Log control in customs document configuration for
Document Transfer
Document Check
Thanks
Akhil..

Hi Akhil,
For some situations, GTS allows you some control over the logging by specifying the Profile to use. But if you do not specify a Profile, logging still occurs using the default values in the standard code.
Regards,
Dave

ITunes for Windows, QuickTime, and Apple Application Support

Disclaimer: Apple does not necessarily endorse any suggestions, solutions, or third-party software products that may be mentioned in the topic below. Apple encourages you to first seek a solution at Apple Support. The following links are provided as is, with no guarantee of the effectiveness or reliability of the information. Apple does not guarantee that these links will be maintained or functional at any given time. Use the information below at your own discretion.
*The relationship between iTunes for Windows and QuickTime for Windows*
Conceptually, you don't go too far wrong thinking of iTunes for Windows as a gigantic QuickTime for Windows plug-in. QuickTime for Windows provides the audio and video playback capabilities for iTunes for Windows, the codecs iTunes for Windows uses for importing and burning CDs, and so forth.
So, under normal circumstances, if you uninstall your QuickTime for Windows your iTunes for Windows will no longer launch. The exception is if you install a different application such as QuickTime Alternaltive, which also provides QuickTime playback capabilities. However, most such applications (QuickTime Alternative being a good example) are themselves built from actual QuickTime program files. So there's really no getting away from the requirement to have QuickTime for Windows componentry installed on your computer in order to get your iTunes for Windows to launch and run.
In addition to needing some QuickTime for Windows installed on the computer for iTunes for Windows, a given iTunes for Windows version will require *at mininum a particular version* of QuickTime for Windows to be installed on the computer in order for that iTunes for Windows version to run. For example, iTunes for Windows 5.0.0.35 requires at least a release version of QuickTime for Windows 7.0.2 to run correctly, iTunes for Windows 6.0.0.18 requires at least a QuickTime for Windows 7.0.3, and so on. The same applies for solutions involving other programs like QuickTime Alternative. An iTunes for Windows 6.0.0.18 would require an installed version of QuickTime Alternative to made from (at least) QuickTime for Windows 7.0.3 componentry in order for iTunes to run.
The most straightforward way to go about getting your iTunes for Windows launching again after you've uninstalled your QuickTime for Windows is simply to reinstall QuickTime for Windows. You can get the latest version of QuickTime for Windows XP, Windows Vista and Windows 7 from the following download page at the Apple website. (Use the download link that doesn't mention iTunes.)
[Latest QuickTime for Windows version|http://www.apple.com/quicktime/download>
*The relationship between iTunes and Apple Application Support*
iTunes for Windows uses a number of the same program files as other Apple software for Windows (most notably, QuickTime for Windows and Safari for Windows). Starting with iTunes for Windows version 9.0.0, QuickTime for Windows version 7.6.4, and Safari for Windows 4.0.4, program files common to more than one of the programs have been stored in a single location: "Apple Application Support".
So, if you uninstall your Apple Application Support (using the Add or Remove programs control panel in Windows XP, or using Programs and Features in Windows Vista or Windows 7), your iTunes for Windows 9.0.0 (or higher version) will no longer launch ... because several essential program files for iTunes for Windows 9.0.0 (or higher version) will have been uninstalled.
At the time of writing this user tip, Apple Application Support is not available as a "standalone" download from Apple. It is only available as part of the installer bundles for the most recent versions of iTunes for Windows, Safari for Windows and QuickTime for Windows. So if you have uninstalled your Apple Application Support and your iTunes for Windows 9.0.0 (or higher version) is no longer launching, the most straightforward way of getting your iTunes for Windows launching again is to uninstall your existing version of iTunes for Windows and reinstall the latest version of iTunes for Windows. (The iTunes reinstall should also reinstall your Apple Application Support.)
[Latest iTunes for Windows version|http://www.apple.com/itunes/download>
If, however, you've uninstalled both your Apple Application Support and your QuickTime for Windows, the most straightforward way of getting them both reinstalled is to download the latest QuickTime for Windows installer from the Apple website. (Use the download link that doesn't mention iTunes.)
[Latest QuickTime for Windows version|http://www.apple.com/quicktime/download>
This is the 1st version of this tip. It was submitted on March 7, 2010 by b noir.
Do you want to provide feedback on this User Contributed Tip or contribute your own? If you have achieved Level 2 status, visit the User Tips Library Contributions forum for more information.

Let's try a standalone Apple Application Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of the issue.
Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
http://www.apple.com/itunes/download/
Download and install the free trial version of WinRAR:
http://www.rarlab.com/
Right-click the iTunesSetup.exe (or iTunes64Setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
Go into the folder and doubleclick the AppleApplicationSupport.msi to do a standalone AAS install.
Does it install properly for you?
If instead you get an error message during the install, let us know what it says. (Precise text, please.)

Nvidia CUDA driver update fixes crashes for Premiere Pro and other applications

We are seeing reports that the CUDA 5.5.47 driver update released today addresses the crashing problems introduced by the CUDA 5.5.43 driver update in Premiere Pro and other applications. So, if you have an Nvidia GPU, please update your drivers to use the most recent version of the CUDA driver.
Thanks!

It should be added that only Macs and Quadros need the CUDA driver. That is not required for use with GeForce cards on Windows.

Link between documentation for chars value and chars

Hi,
we need to find out sap transaction or report for link between documentation of chars value and chars.
we know for specific chars through CT04 and going to VALUES sub-tab then selecting perticular chars value and clicking on the documentation for value.

Go to transaction CT10 and select display option 'Allowed values'. You will have the characteristics along with their values.

Project setup for a mobile and desktop application including native extensions (ANE)?

I'm using Flash Builder 4.6 and I want to develop an application that is deployed to mobile and desktop devices. Therefore I tried a setup with three projects; one desktop project for Windows and Mac OSX, one mobile project for iOS and Android and also one library project for shared resources. The library project is used in the mobile and desktop project. Afterwards I placed all stuff like AS classes and UI components in the library project and instanciate them in the devices project. This works so far. (As consensus decision-making I used Flex components that are available vor mobile and desktop.)
But If I want to use native extensions (ANE) like a DLL for Windows or a gyroscop for mobile devices, then I can't add the ANE to the library project. I have to add the ANE file separately to each device project and build a separate UI components. Is this the way it's intend to use ANE files? Is there an even simpler approach?
Or is there a completly different way, e.g. setup just one common project (instead of three) and use different skins for mobile and desktop?
Your answer is appreciated. (Including links to documentation and tutorials.)

This thread doesn't look promising:
http://forums.adobe.com/message/4737831
Same here:
http://stackoverflow.com/questions/11143907/flashbuilder-4-6-how-do-setup-project-for-mobi le-desktop-publishing
Though if you're using Starling, there's some setup instructions here:
http://wiki.starling-framework.org/manual/project_setup

Re: iTunes for Windows, QuickTime, and Apple Application Support

This tip is ready for consideration.

Let's try a standalone Apple Application Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of the issue.
Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
http://www.apple.com/itunes/download/
Download and install the free trial version of WinRAR:
http://www.rarlab.com/
Right-click the iTunesSetup.exe (or iTunes64Setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
Go into the folder and doubleclick the AppleApplicationSupport.msi to do a standalone AAS install.
Does it install properly for you?
If instead you get an error message during the install, let us know what it says. (Precise text, please.)

Shared codebase for both mobile and web applications?

I've been developing a mobile application for a while now. It runs on iOS and Android as well as on the desktop as an AIR app. This is great and I'm very excited about it. However, last week I was asked why I couldn't export a version of the app that ran within a web browser. I said that I assumed I could and that I would look into it.
But why would you want to run mobile code on the desktop?
A couple of reasons:
Greater re-use of code. This doesn't make sense in all cases but it does in many cases. (I won't elaborate because I think this is self-evident. If you disagree I'd be happy to talk about it but I'd rather not clog this description with it.)
Quicker/easier client demos. Rather than having to install an apk or an ipa on a mobile device, I can just send a URL.
So what have I found? Well, from what I've tried so far.. it.. doesn't work. Or rather I haven't been able to make it work.
I started by creating a Flex Library project for all shared code. Then I created 2 application projects that reference it- one for mobile and one for web. The mobile project works fine but the web project does not. Here's what I've tried so far to make it work:
I tried adding the mobilecomponents.swc and the mobile.swc theme to my web project so that Flash Builder knows about MobileSkin (and other mobile-only classes). This enables my app to compile but when I launch it immediately throws a runtime error inside of UIComponent: VerifyError: Error #1014: Class flash.text::StageText could not be found. I've found very little about this error, and the one tip I did find (adding the --swf-version=13 compiler option) does not work.
I tried using conditional compilation to control which class my skin components inherited from: MobileSkin or SparkSkin. This was just a quick experiment to see if it worked. I know it's disgusting and not a production solution. My thinking though was that if MobileSkin was really just an optimized version of SparkSkin, my skins should be okay inheriting from either. This didn't work right away- app wouldn't compile b'c certain methods were missing (ex. layoutContents) and so I bailed on it because it felt dirty to begin with.
I tried replacing MobileSkin with UIComponent as the super class for all of my skins thinking that MobileSkin was probably just a lightweight subclass of UIComponent anyway. This approach resulted in some compiler errors at first (ex. no layoutContents method, no measuredDefaultWidth/measuredDefaultHeight properties, addChild vs addElement, etc.). Once those issues were resolved the app compiled but crashed with runtime errors inside of UIComponent's "getState" method. (Looks like MobileSkin overrides this method to prevent UIComponent's default behavior.)
So none of those approaches have worked for me so far... but what about you guys? I have no hopes of Adobe reading this thread or responding to it in any way, but I would love to hear from other people in the community. Have you encountered this issue yet? Were you able to make it work or can you spot any obvious oversights I've made in the methods I mentioned trying above? Thanks in advance if you can.

Update: I've been able to make progress with the first route mentioned above: adding the mobilecomponents.swc and the mobile.swc theme to my web project
Turns out that Flash Builder had led me wrong in this regard. Adding the mobile SWCs to your Library project with the "merged into code" setting results in the compiler warning:
The swc '/Applications/Adobe Flash Builder 4.6/sdks/4.6.0/frameworks/themes/Mobile/mobile.swc' has style defaults and is in the library-path, which means dependencies will be linked in without the styles. This can cause applications, which use the output swc, to have missing skins. The swc should be put in the external-library-path.
Seeing this the first time, I changed my linkage type to "External" and the warning went away. Then in my web project, I also added the mobile SWCs and set the linkage type to "merged into code" there. Flash Builder seemed happy with that approach, but upon running my application I got bizarre runtime errors (as mentioned above).
Turns out that my first attempt was the correct way. Set the linkage type on the library project to "merged into code" and then don't re-link from your web project. Flash Builder will warn you about it but ignore the warning. Things seem to work pretty well for the most part now! I have an issue or two to look into (ex. List component doens't scroll) but things look pretty promising overall!

Documentation for Governance Risk and Compliance Applications Suite

Similar Messages

Maybe you are looking for