Documentation for HPT and OWA pacakges?

Can anyone shed any light on where you can find documentation on these packages
-- other, that is, than yanking them out of the DB and learning by inspection?
I've spent a couple hours searching the 8i and 9i documentation without luck...

Can anyone shed any light on where you can find documentation on these packages
-- other, that is, than yanking them out of the DB and learning by inspection?
I've spent a couple hours searching the 8i and 9i documentation without luck... I spent 2 secs on Google :-)
http://otn.oracle.com/docs/products/ias/doc_library/90200doc_otn/web.902/a90101/toc.htm
It is for the Release with version 1.0.2.2, but maybe not much have changed/added since then...
Hth,
Fredrik

Similar Messages

  • Documentation for SalesCloud and Rightnow integration.?

    Documentation for SalesCloud and Rightnow integration

    Unfortunately I could not find any references for such documentation. You may want to contact support to see if they have had similar questions.
    Jani Rautiainen
    Fusion Applications Developer Relations
    https://blogs.oracle.com/fadevrel/

  • Enduser documentation for fi and co

    Hi Gurus,
    Any body can provide enduser documentation for fi and co i will assign full points to you
    [email protected]
    Thanks
      RAM

    hi
    What Are SAP End User Manual
    It is the same for every other modules although here I reference it mainly for SAP HR.
    1) You should understand which targeted group for the end-user training is for.  Do they have any computer background or not. 
    2) In what way they are going to make use of the manuals supplied to them during the course of training.
    Let us focus on how to prepare manuals:
    In the client side , End Users are not permanent. If they get any better job outside they will resign and go out. Even if you train them well, again the end-user team disappears after some time. That is why implementing company( Client ) expects SAP Consultants to prepare documents which are self explanatory (even to a layman in SAP) and study themselves and use the sap easy access very comfortably.
    Hence we should prepare a document which explains the following things comfortably:
    A) All the buttons and Screens we have in sap and its importance for an end-user.
    B) All the transaction codes used by end user.
    C) The STEP by STEP usage methodology with screen shots and explanatory foot notes for each Transaction code.
    D) Prepare a book a table and columns which should have the following information:
    - Sl.NO.
    - Transaction Code
    - Navigation path 
    - Use of the Code
    - Expected Result
    - Achieved Result
    - Remarks/Any Comment
    E) Highlight the common troubles during the usage of SAP by an end- user and give the solutions (ready to use)
    These problems you can come across while giving the in house training for the end-users.  You just place them at one place and publish it for their usage in future for any of their new joinees as an end-user.
    F) Every consultant is aware that the entire Organsiational Management is with end user only. Means consultant should train the end user in entire OM.
    G) We should inform the importance of info types and usage for our purposes at expert mode, PA30, PA40 etc.,
    H) Each field in the international infotypes should be explained very clearly and ensure that they are comfortable with the fields of infotypes which have been configured for their company.
    For example : info type 0001 Org Assignment insists about the three structures of the HR. We should explain each sub field like Emp Group, Emp Sub Group, Personnel Area and Sub Area and its importance and relevance to their company so as to understand while processing them from the end- user point of view . 
    When an employee is hired into the company , now the end-user in a position to understand which employee group and subgroup, Personnel Area And Sub Area etc., should allotted..
    Like this whatever comes across in SAP Easy Access should be insisted through the training of end users.
    I) Demo, exercises and solutions should be provided in the manuals.
    J) Glossary of terms and expansion of Acronyms, Abbreviations should be given.  Like this each consultant should focus on end user training and prepare the documents.          
    What is the Difference between Consultant & End users?
    SAP consultant role is to build the system, changes & modification/updation in currently installed SAP system for the end users.
    SAP End user only use the SAP system just to fetch some info, or to create new thing. So a end user is just using the final product which it is meant for and consultnat design the product/updation and modification.
    The roles and responsibilities of end users is working in easy access menu they will not have authorizations of using img settings if they get doubt they will send query to the implemented company and just entering day to day transactions.
    Roles and Responsibilities of End User:
    Using the software at the end or after the implementation is an End User.
    In sap HR , we do come across entire Org Management creation by an end user after the Personnel strucutre is created.  OM objects like creation of Org Unit means functional area or dpt , creation Job and Position and its occupancy is with in the limits of an enduser.  Initiallly the OM is created by sap consultant . In course of time a new department has appeared in the company of the client .. this has to be created by the enduser rather than depending up on the implementor... similarly new job and position..like this small things are always done by the enduser.
    The entire work of OM is purely depends upon the enduser.
    After from this running periodical payroll and Ensuring of the Time schedules ( Work Schedules) of each employee is done from sap easy access by an enduser and the show run of payroll everymonth is by the enduser only.  Like this lot of roles are there for an end user. 
    Whatever the problems come across during the enduser utilisation of sap ...that will reach as ticket to the support team
    Explain what are the job responsibilities of END user & POWER user.
    One would need user id and password to access SAP be it a developer, consultant, administrator, or end user.
    End user is the one who performs transactions in SAP after it goes live. Such as posting an invoice, goods receipt, creating purchase orders, sales orders etc.
    Power Users are users with advanced knowledge in certain applications and with special permissions or roles. They work in the specialist departments in the company and are available to other users as contact persons.
    nagesh

  • Documentation for wwv_flow_utilities and other wwv packages

    Hi,
    Where can I find documentation for wwv_flow_utilities and other wwv packages? It seems we have to use many of the variables/procedures/functions provided in certain situations.
    Thanks,
    Paresh

    Hello Paresh,
    The documentation is here. Click on the 'Application Express API Reference' for detailed info.
    Greetings,
    Roel
    http://roelhartman.blogspot.com/
    http://www.bloggingaboutoracle.org/
    http://www.logica.com/

  • Documentation for LSMW and BDC

    can anybody give me documentation for LSMW and bdc and its relevance in asset accounting.

    Hi Anand,
    there are several threads available in this forum for this topic. kindly do a search- you will get several useful material.
    i have given u couple of useful links
    LSMW
    LSMW demo
    BDC & LSMW
    The last thread has both the topic u have asked about.
    Thanks
    Janani
    award points if helpful

  • Documentation for reporting and printing

    Hi to all dear sap experts.
    I need a little information...
    We have SAP Business One 9.0 PL 08. In SAP Help we have a link to URL  http://service.sap.com/smb/sbocustomer/documentation.
    Opening this URL, we are redirect to https://websmp206.sap-ag.de/smb/sbocustomer/documentation where, after login, we can see the documentation about sap business one 8.0 and 9.0 release.
    But there is nothing about PLD PRINT LAYOUT and CRYSTAL REPORT.
    Can you suggest me a correct link from where a can download the documentation for these 2 software ?
    I would like to understand more about PLD and ("maybe") try to create a layout for eg. Invoice with crystal report..
    Thank's in advance for your time and your help...
    Luca

    Hi,
    There is a documentation for both PLD and crystal report for 8.8 version.
    Under documentation ---> Choose release family 8.8--->Select how to guides for 8.8 & 8.1 (top right corner)---> List of guides will appear.
    Thanks & Regards,
    Nagarajan

  • Different timeout for ECP and OWA possible?

    Hi,
    Is there any trick to change the timeout value of only the ECP?
    I have set the values for public and private OWA, but I´d want another value as ECP timeout.
    It would also be OK if the special timeout value was for a known client computer or user.
    Thanks!
    Nico

    Have you set the values in the registry as shown in Rajith's blog post here:
    http://theucguy.net/changing-outlook-web-app-2010-timeout/
    I think the corresponding location for ECP is here:
    There is a Linkage and Performance subfolder, like for OWA. If you have a test lab, I would test settings in that location.
    Please mark as helpful if you find my contribution useful or as an answer if it does answer your question. That will encourage me - and others - to take time out to help you.

  • Looking for documentation for CSM and the Lync 2010

    hi experts,
    Does anybody knows have Cisco any good documentation for the Lync 2010?
    We have to setup the CSM for the load balancing as we are not able to use DNS load balanbing method. Or we have done so, but we need to very if things are correct.
    Pepi

    Hello Dunc_F,
    Is this what you were looking for?
    http://a248.e.akamai.net/pix.crutchfield.com/Manuals/472/472RADIO2.PDF
    B-rock

  • Documentation for FXML and CSS

    Where can I find documentation that lists all the different things you can do using FXML and CSS for JavaFX?
    For example, how am I supposed to know that I can do "-fx-font-size: 12px" for font size in CSS or "Font name='System' size='12.0' />" for FXML?

    CSS Styling
    Here is the css reference guide, which is an excellent start.
    Complement it by thoroughly studying caspian.css (the JavaFX 2.2. stylesheet) and modena.css (the JavaFX 8 stylesheet).
    There is also css styling info scattered throughout the Oracle JavaFX tutorials.
    Try using the material from the css reference guide to style some of the simple default controls, like buttons etc.
    Once you have the hang of that, move on to more complex things like graphs and tables.
    Don't forget tricks like overriding some of the default paint constants as it makes styling much easier if all you need is a color change, for example try the following stylesheet:
    .root { -fx-base: antiquewhite; }
    FXML Reference
    There is (and never will be) any such thing (as least not a complete one).
    FXML works by reflecting on classes.
    As you can add more classes to your classpath or modify existing classes, you can add more elements and attributes to fxml.
    Best current documentation of fxml is the Introduction to FXML as well as the FXML tutorials from Oracle.
    In terms of learning some of the more common elements and attributes for FXML for standard JavaFX controls, try loading up SceneBuilder and examining the FXML it generates.
    Also, as FXML is a reflection of the JavaFX Java API, you can get to know what attributes and elements it can use by looking at the standard JavaFX javadoc.
    All that said, I think the FXML documentation could be improved, so if, after you go through in detail studying the available information I provided in this post, you have concrete ideas for improvement of the documentation, feel free to file specific detailed requests in the JavaFX issue tracker, or send feedback to the JavaFX documentation team's email address: [email protected]

  • Full Wireless Sync Needed for BIS and OWA

    Is Blackberry working on full wireless sync for those using Blackberry Internet Service with Outlook Web Access?  Coming over from Windows Mobile, where everything wirelessly syncs with OWA, it is like going back to the stone age to have to dock the phone to the computer in order to sync calendar items, contacts and memos.

    Stern,
    In order to wirelessly sync PIM data (Calender, Contacts, Tasks, etc..) you will need to purchase Blackberry Professional Software (geared more for smaller businesses) or the Blackbery Enterprise Server Solution (larger business)
    There is currently no fix or patch to this service - OWA (Outlook Web Access) is Microsoft owned and operated, as well as windows mobile devices and Outlook mail programs, thus the reasoning behind the BB 'license' costs....
    Hope that helped
    If I successfully help you with an issue, thank you for clicking "kudos" in my post.
    If your issue has been solved, please resolve this thread by marking the post which solved it for you!

  • Documentation for RowSet and dataTableNModel

    I want to get a clear understandig of RowSets and DataTableNmodels. How can I get a thorough documentation ?

    you can also look at the Creator api refs:
    http://developers.sun.com/prodtech/javatools/jscreator/reference/apis/index.html
    and the appmodel example shows some ways to code to the datamodel:
    http://developers.sun.com/prodtech/javatools/jscreator/reference/codesamples/sampleapps.html
    hth,
    v

  • Documentation for Setup and use OracleASJms in JDeveloper preview 3

    Hi, Is there any documentation / tutorial that show how to configure and use OracleASJms in JDeveloper Preview 3(11.1.1)with the Embedded OC4J? Thanks!
    - Matthew

    Hi,
    not that I am aware of. However, you may want to try the JDeveloper 11 and OC4J 11 forum at JDeveloper and OC4J 11g Technology Preview
    Frank

  • EXCHANGE 2013 - ECP AND OWA INTERNAL ERROR 500 - NEW INSTALL

    Really hoping someone can help me here.
    I first installed 2012 OS and 2013 exchange and users were getting 'Unable to open your default folder' when trying to open outlook. After much googling and nothing working I decided to put 2008 R2 on the server with 2013 Exchange. Now i am running into massive
    issues. 
    Firstly i get Internal Errror 500 after putting in credentials for ECP and OWA. I did notice that it is also defaulting straight to this URL after entering password https://localhost/owa/auth.owa
    I check the management shell and that connects without any issues. I also logged on to a computer to see what it did. After autodiscover it is not able to log onto server and then it looks like it is look for the old server information from previous server.
    Any help would be appreciated. Can i do another reinstall of OS and how am i meant to remove the previous data that it seems the server has found?

    Hi,
    According to your description, I understand that cannot login internal ECP\OWA with error 500, also autodiscover failed.
    If I misunderstand your concern, please do not hesitate to let me know.
    I notice that autodiscover “looks like it is look for the old server information from previous server”, have you installed multiple version Exchange in your environment?
    Please run below command to double check the virtual directory configuration:
    Get-OutlookAnywhere | FL Identity,*Host*,*Auth*
    Get-OwaVirtualDirectory | FL Identity,*url*,*auth*
    Get-EcpVirtualDirectory | FL Identity,*url*,*auth*
    Get-WebServicesVirtualDirectory | FL Identity,*url*,*auth*
    Get-ClientAccessServer | FL Identity,*URI*,*auth*
    Then, open IIS and check on the Application Pools to view whether MSExchangeOWAAppPool and MSExchangeECPAppPool is running on .NET Framework v4.0, and recycle virtual directory for test.
    Additional, here’s a thread about “Removing Old Exchange and installing a new one”, for your reference:
    https://social.technet.microsoft.com/forums/exchange/en-US/46ca107c-7ece-4da7-8aea-46b705793f37/removing-old-exchange-and-installing-a-new-one
    Thanks
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
    Allen Wang
    TechNet Community Support

  • Documentation for objects, properties, methods

    Hi there,
    I'm sure this is quite simple, but I can't find it.
    Where do I find documentation for properties and methods of objects?
    Specifically, I am looking for the properties and methods of FindGrepPreferences.
    I have the Indesign SDK and am looking at this file: scripting-dom-visualbasic-idr50.html.
    I see FindGrepPreferences, but I don't see the properties and methods.
    I am using MS Access to control Indesign and can use the object browser, but it only lists FindGrepPreferences as a member of the Application object.
    Where do I find the properties and methods of FindGrepPreferences?
    What am I missing here?
    Thanks,
    Ric

    Use the Help menu of ExtendScript Toolkit. Choose the Object Model Viewer.
    Dave

  • Where can I download support documentation for Adobe CS2 programs?

    Adobe makes it ridiculously hard for people who still have CS2 to find or download support documentation for CS2 programs from their site! I need to download support documentation for Illustrator and Photoshop CS2. Where? Or is it just not available on Adobe.com anymore?

    What sort of support information are you looking to download? The
    manuals are installed on your own system, and I don't think the tech
    support stuff is deleted - so what is it that you need?
    Aandi Inston

Maybe you are looking for