Documentation for MSE 7.3.101.0 & Services...

Hey guys-
Just did an upgrade on a MSE from 7.2.110.0 to 7.3.101.0. This image upgraded my Context Aware Services from 7.2.1.54 to 7.3.0.40 and upgraded my WiPS from 1.0.3010.0 to 1.0.4038.0.
Question is.... where do I find the configuration guides for these versions? I'm on the Cisco Configuration Guides page for the MSE 3355 and the only versions displayed are 7.2.103.0 & 7.4.100.0 (for both services).
Any recommendations on what CG I should be using? Or where might I find the appropiate documentation or CG?
http://www.cisco.com/en/US/partner/products/ps9742/products_installation_and_configuration_guides_list.html
Thanks

You need to reference the code you upgraded the MSE to not the CAS or wIPS version. Anywho... The Prime will manage all that anyways so that's where the configuration needs to be configured.
Sent from Cisco Technical Support iPhone App

Similar Messages

Is there any documentation for UCES?

Hi,
I'm searching and searching for documentation for the "Utility Customer E-Services"-component, but I cannot find anything on the SDN or Marketplace. Can anybody help me with a link for documentation, so that I can configure and also work with this component?
Thank you
Silvio Möckel

Hi
Please find under this link
https://websmp108.sap-ag.de/ibc --> SAP for Utilities
Note 740143 - Composite SAP Note SAP IS-U/Utility Customer E-Services
Also please tryout the documents in the installation DVD of UCES, you would get all the documents there.

Documentation for Service Contract API

Hi All,
Sub: Any Documentation For The Public API's OKS_CONTRACTS_PUB,
OKC_CONTRACTS_PUB.
Firstly i would like to say Thank You for spending your valuable time for this Query.
Introduction:
Currently i am working in Oracle Service Contracts module, which is Oracle
Application's CRM module.
Specifications:
oracle application version: 11.5.10.2
Data Base version: oracle 9.2.0.6
Problem:
We are trying to integrate the Service Contracts through following Public API's
with web.
API's are:
OKS_CONTRACTS_PUB,
OKC_CONTRACTS_PUB.
I search so much to the documentation for these API's, but i did not get any thing.
I search in Oracle Meta Link, Google.
Could you help If any Documentation If you find (or) you have ?
Please forward to:
[email protected]
[email protected]
Any help from your side will appreciate.
Thank you.
Regards,
Sai Krishna @cavaya

Look at this link you will be able to get some information about the Api
http://mywebpages.comcast.net/muzaffarl/whitepaper/02d.pdf
If you find any document regarding this Api other than this kindly let me know.

Web Service documentation for all Web Services

Hi,
In March there was a documentation released named "Shop Floor web service field guide".
Unfortunately this only documents a few of the available Web-Services.
I would like to know where I can find:
1) Documentation for other web-services that were part of previous DataExchange XML.
Like BomProcessingInBinding, ItemProcessingInBinding.
2) Updated document for "Shop Floor web service field guide" since I only have the first version. Or information
if there has been no updating. Can't seem to find this document when searching in SAP Support Portal.
Br,
Johan

Hi,
Plese find below service market place link below
https://websmp209.sap-ag.de/~form/sapnet?_FRAME=CONTAINER&_HIER_KEY=501100035870000015092&_HIER_KEY=601100035870000179414&_HIER_KEY=601100035870000222244&_HIER_KEY=601100035870000235182&_HIER_KEY=701100035871000565647&_OBJECT=011000358700000709862011E&_SCENARIO=01100035870000000112&
Thanks,
Ramesh

Deployment issue - Login failed for user 'NT AUTHORITY\NETWORK SERVICE'

I am attempting to deploy a site from my development PC to my server. I have no issues running the site on the server using VS2010 Express Web in debug. All page queries are working within the debugger. The connection strings are identical between the PC
and Server, except the host name.
connectionString
="Data
Source=SOCIALSERVER;Initial Catalog=Intake_be;Integrated Security=True"
However, when using the site normally via IIS, the pages containing data access are failing with a permissions problem. The non-data access pages render normally.
Login failed for user 'NT AUTHORITY\NETWORK SERVICE'
Looking at the SQL2005 instance via SQL Management Studio, I see security folder with Logins under the Server. NTA\NS is listed as a user login. But, I also see similar folders under each
of 3 databases. NTA\NS is not listed as a login specific to my target dB.
My site is for internal (intranet) use only. There is no internet access into my IIS. This is my first deployment into production. I think I only need Windows Authentication but I lack the experience to make a good decision. My goal is to allow domain users
to access pages that produce read only data. But, I also need controlled access to pages that can modify data. I used the native winform template for ASP.NET 4, which includes some roles based security.
How do I grant permissions for internal users on the pages that access SQL data? How does that security model work with the native roles based security? i.e.
add
name="AspNetSqlMembershipProvider"type="System.Web.Security.SqlMembershipProvider"connectionStringName="ApplicationServices"...
etc.
Thanks for your time and patience on this Deployment 101 type issue.
Kurt

hi,
You receive either of these error messages specifically when you use integrated security.
To resolve you can use one of below.
Method 1: Programmatically change the security context of the ASP.NET worker process to a user who has the correct SQL Server permissions.
Method 2: Change the default configuration of ASP.NET so that the ASP.NET worker process starts and runs under the context of a user who has the correct permissions in SQL Server.
Method 3: Grant the correct permissions in SQL Server so that the ASPNET account (or NetworkService account, for an application that runs on IIS 6.0) has the appropriate access to the required resources.(Go to the Computer Management >> Local User and
Groups >> Groups >> Right Click and go to properties on IIS_IUSRS >> Add appropriate user.
Thanx, Mark as answered if you are ok ..

Where is the official documentation for Wireless OTA Enterprise App Distribution?

Where is the official documentation for Wireless OTA Enterprise App Distribution? It used to be here:
http://developer.apple.com/library/ios/#featuredarticles/FA_Wireless_Enterprise_ App_Distribution/Introduction/Introduction.html
The above link is present in many posts in these forums (cf. More Like This below this question.
The information I seek may also have been here:
http://support.apple.com/kb/index?page=answerlink&url=http://manuals.info.apple. com/en_US/Enterprise_Deployment_Guide.pd…
The article in question had official details on
the itms-services:// link,
the app manifest file format and
the general information.
Currently I cannot find anything official on enterprise app distribution - only third party information. Has something changed, or is this a documentation glitch? Surely wireless OTA enterprise app distribution is still available via the enterprise developer program?
Note: We currently use this for one of our enterprise clients. But before recommending other clients to join the enterprise developer program, we would like an official citation on whether this mechanism still exists.

OK, the link in my question is no longer a 404. It's been replaced by a redirect to a new iOS Enterprise Deployment subsite which has been remade for iOS 8.
http://www.apple.com/iphone/business/it/deployment.html
My actual question about the technical reference is now located in the iOS Deployment Reference section of Apple Help:
https://help.apple.com/deployment/ios/#/apda0e3426d7

Cross Application Time Sheet (CATS) - Documentation for ECC 6.0

Hello everybody,
i'm searching for new documentation for customizing of Cross Application Time Sheet (CATS) for
SAP ECC 6.0.
I found on
http://help.sap.com/saphelp_nw04/helpdata/en/64/3fff9a470211d189720000e8322d00/frameset.htm
support SAP link.
I have also Cross Application Time Sheet (CATS) pdf documentation but for SAP R/3 4.6c release.
Can somebody suggest me where to find "how to" pdf documentation for ECC 6.0 release?
Thanks
Jerry

Hi,
you can refer to books by SAP press... Configuration CATS
and can log on to Service.sap.com
Regards,
Kapil Kaushal

Demo Documentation for a Simple Cartridge Creation

Hi,
Thus anyone knows where i could find a Tutorial or a Demo documentation for implementing a Simple Cartridge in OSM 7.0.2?
I'm trying to use all the components supplied from the Design Studio but i'm not understanding how to relate them and how to configure them in the correct way just by reading the documentation supplied in the installation.
All Oracle documentation talks about concepts and the components in a separate matter, but no in a fully detailed How to implement a Cartrigde step by step, using all the components. The only tutorial that i saw was in the Developers Guide and is very, very simple.
Thanks

Hi,
Following are some of the resources:
1. From Design Studio: File -> New -> Example -> 2 examples under "Design Studio Order and Service Management Provisioning Examples"
2. Sample SOM cartridge cartridge on OTN (I will put in some Orchestration Samples soon) -> https://www.samplecode.oracle.com/sf/projects/som/
3. You can download the productize O2A cartridge cartridges from https://edelivery.oracle.com/. However, I would suggest you to look at option 1 & 2 before looking at the O2A cartridges.
Cheers,
Deepankar (Deep) Dey

Documentation for doc literal processing

I'm struggling with an existing that uses doc literal services, but I can't get it to work in oc4j 10g preview.
I've tried the doc_lit demo that Oracle provides -- loading the WSDL from the original source (ws-i.org) works fine, but trying to load it locally produces errors. The first error is a complaint that the WSDL doesn't define a service, so I added the service as suggested in another thread. However, at that point although the first pass through wsa generates things, it does not generate the correct type classes, so the second pass (update-impl) through wsa fails.
I'm confused as to why the WSDL processing is different depending on whether it's loaded from ws-i.org or the filesystem. And I'm confused about how the WSDL should properly look to generate the type classes.
Any pointers to documentation I may have missed, or any other clues or help would be very much appreciated.

I'm looking for the same thing -
Were you able to location any documentation?
I've been trying to get my hands on the documentation
for the C4. Sun's doc site does not have this product
listed at all. The product documentation link
(http://docs.sun.com/app/docs/prod/1878#hic) just
returns " The requested item could not be found."
I've even tried opening up a case with Sun. First,
the support people had no idea what the C4 was. After
3 days and 3 support engineers, I finally found one
who understood what this product was, but I was then
told that getting the documentation would be on a
time and materials basis. I'd rather not have to pay
$400+ for documentation that should be on their
website, just like all their other equipment. I'm
currently using the Quantum PX502 documentation as a
reference, but I'd really like to see Sun specific
documentation.
Any ideas?
Thanks.I'm looking for the same thing -
Were you able to location any documentation?

Backup and restore documentation for outlooksoft 4.2

Any one have backup and restore appset documentation for Outlooksoft 4.2 version? I am interested in both the Server Manager functionality and doing it manually. I haven't had much luck with backing up appset using server manager.
Thank you.

Hi,
Keep in mind that with version 4.2, BPC Server manager backup and restore the OLAP DB (SQL Server 2000) whereas it does not requires it anymore starting version 5.x.
The root reason is that under 4.2 + AS 2000, security access to cube are directly stored in the cube definition.
But there is a side effect about this : If your AS database is over 2GB then BPC Server Manager will not work anymore. This is due to a restriction on SQL Server Analysis Service 2000 on msmdarch.exe process.
Based on previous experience, if you want to do it manually because BPC Server manager is not working :
Backup \webfolder\<<AppSet>>\*
Backup \FileDB\<<AppSet>>\*
Backup AppSet DB
After restore, you will have to process everything to get back Analysis Service DB + Cubes + Security... But i am not very sure it will work. Maybe you should at least create the OLAP DB (even if it's empty) to make it work.
But for sure this is doable, but technical limitation make it hard !

Any pointers to good documentation for APD....

Can someone point out a site or drop here documentation for APD, I have been throught the SDN site already, I am looking for a comprehensive documentation.

Check this link for How to doc on APD.
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/96939c07-0901-0010-bf94-ac8b347dd54.
Check this link for help
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/96939c07-0901-0010-bf94-ac8b347dd541
Check this answer for APD's
[APD]: How to transfer data to SAP CRM?.
APD
Check these blogs and links...
Start with Analysis Process Designer
Launching an APD analysis process from an ABAP program
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/96939c07-0901-0010-bf94-ac8b347dd541
and sap help
http://help.sap.com/saphelp_nw2004s/helpdata/en/39/e45e42ae1fdc54e10000000a155106/frameset.htm
and service.sap.com/bi
https://websmp206.sap-ag.de/~form/sapnet?_SHORTKEY=01100035870000585703&
http://help.sap.com/saphelp_nw04/helpdata/en/49/7e960481916448b20134d471d36a6b/content.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/39/e45e42ae1fdc54e10000000a155106/frameset.htm
SDN;
APD and T-ODS automation questions
Hello Info on APD
Hello Info on APD
APD and T-ODS automation questions
The analysis process designer is the application environment for the SAP data mining solution
"The Analysis Process Designer (APD) makes it possible to find and identify these hidden or complex relationships between data in a simple way.
Various data transformations are provided for this purpose, such as statistical and mathematical calculations, and data cleansing or structuring processes"
Analyzing Customers buying trends using Analysis Process Designer
Start with Analysis Process Designer
Launching an APD analysis process from an ABAP program
Closed loop applications in real world
Thanks...
Shambhu

I need field replaceable unit documentation for Satellite L100-108

Hello, I need field replaceable unit documentation for Toshiba Satellite L100-108 because I want to disassembly the screen.
Can you help me?
Thanks.

I doubt that other notebook manufactures are release her service manuals. Why should they do it?
A few years ago I had a notebook from another manufacture and I couldnt download service manual because its not for public too.
I can understand why these manuals are not for public because notebook disassembling is not so easy. Its pretty tricky and you must remove a lot of screws and parts. I think the most people dont have experience with this and so I go to an authorized service provider. The notebook technicians are the experts for this. ;)

Documentation for changing Server name

Hi,
I'm looking for documentation for changing server name. Ex. from prod1.domainname.com to prod2.domainname.com. We only change the server name, not the server itself.
Does someone know where I can find it?
Thanks
AndrÃ©

On the server side you need to edit two files:
1. ORACLE_HOME/network/admin/listener.ora
depending on the protocols you are accepting connections on, you need to change the value for HOST = <new server name goes here>
2. ORACLE_HOME/dbs/init<SID>.ora
You probably haven't specified this parameter, but if you did specify a value for LOCAL_LISTENER, then change it accordingly.
On the client and server side you need to edit one file
1. ORACLE_HOME/network/admin/tnsnames.ora
Find the service names that refer to the databases that live on the server whose name was changed. If TCP is the protocol being used to connect to these databases, then change the HOST = <new server name goes here> accordingly.

Documentation for ant task wscompile ??

Is there any documentation for the ant task wscompile? In the HelloWorld example, the task is mapped to this class:
com.sun.xml.rpc.tools.ant.Wscompile

I do not know if any documentation exists but I have generated some for my own use. You are welcome to it and please let me know of any inaccuracies :)
Attribute : Description => Required
classpath : Specify where to find input class files. => Yes.
base : Specify where to place generated output files. => No; defaults to present directory.
define : Defines a service using the Java classes. => No, but exactly one of the import, define, or client attributes must be specified.
features : Enable the given features. => No; Features should be specified seperated by a space character.
debug : Generate debugging info. => No; defaults to false.
both : Generate both client and server artifacts (ties, etc.) => No; defaults to false.
client : Generate client artifacts (stubs, etc.). => No, but exactly one of the import, define, or client attributes must be specified.
server : Generate server artifacts (ties, etc.). => No; defaults to false.
source : Generate code for the specified JAXRPC SI version. Supported values are: 1.0.1, 1.0.3 and 1.1 => No; defaults to 1.1
proxyServer : URL of the proxy server including hostname and port. => No; defaults to localhost:8080.
import : Generate interfaces and value types only. => No, but exactly one of the import, define, or client attributes must be specified.
keep : Keep generated files. => No; defaults to true.
mapping : Write the 109 mapping file to the given file. => No.
model : Write the internal model to the given file. => Yes.
nonClassDir : Specify where to place non-class generated files. => No; defaults to present directory.
optimize : Optimize generated code => No; defaults to false.
config : Configuration file for generating webservice. => Yes.
sourceBase : Directory for storing the generated source files. => No; defaults to present directory.
verbose : Output messages about what the compiler is doing. => No; defaults to false.
version : Prints version information. => No; defaults to false.
xPrintStackTrace : Prints stack trace of the errors. => No; defaults to false.
xSerializable : Generate value types that implement Serializable interface. => No; defaults to false.
xDebugModel : Write readable version of the model to a file. => No.

ESS documentation for mySAP ERP2004

Hi,
Can anybody suggest me where can i get complete ESS documentation for mySAP ERP2004 that explains in detail the roles, worksets and iviews involved in it.
Thanks,
Tom

Hi Tom
You can see some documents in service market place and in the below specified links.
https://websmp201.sap-ag.de/ess.
https://www.sdn.sap.com/irj/sdn/developerareas/contentportfolio
https://www2.iviewstudio.com/support_content/_17153/BP_ESS_602_EN.pdf
http://kwhelp.sap.com/SAPIKS/S2de59b4e1b80418dada8bcc618f58c07/KW/IWB_STRUCT9B33383FDB800804E10000000A114084/IWB_EXTHLPE033383FDB800804E10000000A114084/?LANGUAGE=EN&RELEASE=642&IWB_INDUSTRY=&IWB_COUNTRY=&TMP_IWB_TASK=DISPLAY
Also i have some documents.If you want, i can send to you.
Regards,
Yoga

Documentation for MSE 7.3.101.0 & Services...

Similar Messages

Maybe you are looking for