Documentation for the convert servlet

Does anyone know where to find the documentation for the /xmlpserver/convert servlet?

Dear Prasad,
Please change the User profile name as per your requirement.- meaningful name.
You have to create two statuses.
The first status is RRCL.
The Second status Is QFIN.
RRCL and QFIN - u can name them as u like.
There are two statuses.
is it clear?
First you have to create two statuses in the user profile.
You can name them as you like.
For example RRND --> Result recording not done (You can name the first status as RRND)
Second status UDCD --> Usage Decision Can be Done ( You can name the second status as UDCD.
It is your wish.
For each status you have to assign the business transactions .
Hope this is clear.
Best of luck.
Regards,

Similar Messages

I paid for the convertion from pdf to word and its not letting me???

I paid for the convertion from PDF to word i received a confirmation number, but it is not converting, Why?????????

Hi Rosa,
I'd like to assist! Are you receiving a particular error message? I see you have verified your subscription...
There is also this handy 'getting started' guide that may help.
Looking forward to hearing back from you!
Regards, Stacy

DOCUMENTATION FOR THE BENIFIT OF ALL QM CONSULTANTS u2013USER PROFILE

DOCUMENTATION FOR THE BENIFIT OF ALL QM CONSULTANTSu2013
USER PROFILE TO STOP THE UD, WHEN RR IS NOT DONE.
I faced problem in creating the User Profile to fulfill my user requirement.
SHYAMAL JOSHIJI and CRAIG took active participation in solving this issue.
Both of them richly deserve appreciation.
I want to thank CRAIG again, as he insisted me to prepare documentation and publish for the benefit of QM Consultants.
Requirement : User Profile is to be created to block the UD, if RR is not done.
Inspection Type used: 01 or Copy of 01.--> Z10 is used which is copy of Inspection Type 01.
Material Master: For all lab chemicals, Inspection Type Z10 are assigned.
Inspection Plan: For each Lab Chemical the Inspection Plan is created.
                           Usage is 5  Goods Receipt.
                          Status is 4  Released General.
Create one dummy selection set, and corresponding Code Group and Code.
Create one Qualitative Dummy MIC  INVDUMMY
Assign the Selection Set to the Dummy MIC.
Most important  the control parameter of Dummy Qualitative MIC is given below.
Control Parameter Details.
S.No.>Control Title>Requirement
1>Type>Characteristic Attribute
2>Sample>Sampling Procedure
3>Results Confirmation>Required Characteristic
                                       (This is a must)
3--> Results Confirmation --> Single Result
4>Inspection Scope>Fixed Scope
5>Documentation Confirmation>No Documentation
6>Miscellaneous>As per requirements
7>Print>As per requirements
This Dummy MIC has to be added to each and every material whose inspection type is 01 or Z10.
Preferably it must be the first MIC in the Inspection Plan.
Creation of User Profile
1. SAP defined status profile  QM_L_003 is used to stop Stock Posting before the UD.
2. Create user defined status  QM_UDZ10 by coping the SAP defined status Profile  QM_L_003.
3. Create the Status u201CINITu201D and Status u201CQFINu201D.
   Any meaningful name can be given to the user defined Status.
User Status has 9 columns.
FOR THE FIRST ROW VALUES ARE GIVEN BELOW.
Let us discuss for the status  u201CINITu201D
First Column Status Number 1.
Second Column Status  INIT.
Third Column  Short Text  RR NOT DONE
Fourth Column  Long Text Check Box  Do Not Activate
Fifth Column  Initial Status Check Box  Activate
Sixth Column  Lowest Status Number  1
Seventh Column  Highest Status Number  10
Eighth Column  Position  1
Nineth Column  Priority  1
FOR THE SECOND ROW VALUES ARE GIVEN BELOW.
Let us discuss for the status  u201CQFINu201D
First Column Status Number 2.
Second Column Status QFIN.
Third Column  Short Text  RR AND UD DONE
Fourth Column  Long Text Check Box  Do Not Activate
Fifth Column  Initial Status Check Box  Do Not Activate
Sixth Column  Lowest Status Number  2
Seventh Column  Highest Status Number  20
Eighth Column  Position  1
Nineth Column  Priority  1
Please note when multiple status exist, only one status has to be activated for the Initial Status(5th Column).
Initial Status check box can not be activated more than one status.
I have defined two statuses.
I have activated the u201CINITIAL STATUS CHECK BOXu201D for the user defined status u201CINITu201D only.
System will not ALLOW to activate the Initial STATUS CHECK BOX for the second status u201CQFINu201D.
NOW BUSINESS TRANSACTIONS HAVE TO BE DEFINED FOR EACH ROW
Double click the u201CRRCLu201D status.
The new screen appears  u201CChange Status Profile: Transaction Controlu201D.
Two Business Transactions are selected.
First one  u201CMake usage decisionu201D.
Second one  u201CRecord inspection resultsu201D.
First Row  u201CMake usage decisionu201D.
Select the first Business Transaction  u201CMake usage decisionu201D.
In this row there are 6 Radio Buttons exist.
Select the fourth button and fifth button.
Forth Radio Button  Forbidden.
Fifth Radio Button  No Action.
Second Row  u201CRecord inspection resultsu201D.
Select the second Business Transaction  u201CRecord inspection resultsu201D.
In this row there are 4 Radio Buttons exist.
Select the second radio button only.
Second Radio Button  Allowed.
Double click the u201CQFINu201D status.
The new screen appears  u201CChange Status Profile: Transaction Controlu201D.
Three Business Transactions are selected.
First Row  Close inspection u2013 complete
Second Row  Complete insp. - short-term
Third Row  Start inv. pstg bef. Usage Dec
First Row  Close inspection u2013 complete
First Row  Close inspection u2013 complete contains 6 radio buttons.
Select the Second and Sixth Radio Button.
Second Radio Button  u201CAllowedu201D.
Sixth Radio Button  u201CSetu201D.
Second Row  Complete insp. - short-term
Second Row  Complete insp. - short-term contains 6 radio buttons.
Select the Second and Sixth Radio Button.
Second Radio Button  u201CAllowedu201D.
Sixth Radio Button  u201CSetu201D.
Third Row  Start inv. pstg bef. Usage Dec
Third Row  Start inv. pstg bef. Usage Dec contains 6 radio buttons.
Select the fourth and fifth radio button.
Fourth Button  Forbidden.
Fifth Button  No Action.
Save.
Assign this u201CQM_UDZ10u201D to the Inspection Type in customization.
It is working fine for out client.
This document is written for the benefit of all QM Consultants.
Good Luck.

Dear Prasad,
Please change the User profile name as per your requirement.- meaningful name.
You have to create two statuses.
The first status is RRCL.
The Second status Is QFIN.
RRCL and QFIN - u can name them as u like.
There are two statuses.
is it clear?
First you have to create two statuses in the user profile.
You can name them as you like.
For example RRND --> Result recording not done (You can name the first status as RRND)
Second status UDCD --> Usage Decision Can be Done ( You can name the second status as UDCD.
It is your wish.
For each status you have to assign the business transactions .
Hope this is clear.
Best of luck.
Regards,

Documentation for the As-Is and To-Be process.

Can any one send some material regarding how to write documentation for the AS-IS and TO-BE business process for the business blue print.
My requirement is to <u>automate the process which are receiving goods from the gate entry to GR level and finally posting goods issue</u> all should done automatically .
Now we are gathering information from the client according to their business process.
Our client is digital meter product based company.
Its an urgent thanks in advance.

Probably the best thing to do is go to your boss/team lead/project manager/client contact and ask them what documentation they want you to produce and what should go in it. No-one here can guess at that.
Gareth.

Implementation-specific documentation for the Sun/Oracle Java SE ?

Hi,
Some places in the Java SE API specification call for platform-specific documentation. For example, the specification of the method await of class java.util.concurrent.locks.Condition says:
"Implementation Considerations
The current thread is assumed to hold the lock associated with this Condition when this method is called. It is up to the implementation to determine if this is the case and if not, how to respond. Typically, an exception will be thrown (such as IllegalMonitorStateException) and the implementation must document that fact. "
So, implementation-specific documentation is expected to exist in addition to the API specification documentation. Sure, sentences beginning with "Typically..." suggest that that is what the Sun/Oracle reference implementation does, so the behavior of Sun/Oracle implementation can be guessed in many cases... yet sometimes troubling uncertainty remains.
If implementation-specific documentation for the implementation exists, please let me know.
I apologize if I chose an inappropriate forum for this question, but there seems to be no forum for discussing documentation arrangements.

If you want to look at the implementation sepcific documentation, the best place to look is the source.
The reason the docuementation is written generically is because they want you to write portable code, rather than rely on the specific implementation detail of the one you are using.
Even if you don't intend to use another vendor, you might want to upgrade in the future and Java 7 or 8 many change its implementations provided it meets the specification.

Documentation for the AS3.h file

Is there any documentation for the AS3.h file?

http://labs.adobe.com/wiki/index.php/Alchemy:Documentation:Developing_with_Alchemy:C_API
It's listed in the README

Documentation for the Acrobat Document Object Model

Hello
I'm trying to move my first steps in this field, I hope you can bear with my naive questions.
I'm trying to find the documentation for the Acrobat Document Object Model. To my surprise a search in the forum's archives was unsuccessful.
I remember downloading out of curiosity a few PDFs from Adobe about their implementation of JavaScript in Acrobat, one precisely concerning ADOM (but I could be wrong as it was a few years ago and I'm getting old): are those documents a thing of the past?
Thank you very much.
Giordano

Have a look here:
http://www.adobe.com/devnet/acrobat/javascript.html
The link there is for the version 9 reference, which is usually good enough,
but if you want the latest one (in PDF form), you can find it inside the
Acrobat X SDK package, here:
http://www.adobe.com/devnet/acrobat/sdk/eula.html

5641R Documentation for the Input ports

I'm looking for documentation for the inputs for analog inputs and what they do.
These include: "ADC_0_Port_A_RSSI" I know it's a power measurment of something, but when does it get updated? What is the exact output of this?
Thank you

Hi d1sturbanc3,
I believe for the level of detail you are asking for your
best option will be to refer to the AD6654 data sheet found here.Timing diagrams are included which should provide an answer to your questions.
http://www.analog.com/static/imported-files/data_sheets/AD6654.pdf
JaceD
Signal Sources Product Support Engineer
National Instruments

Where do I find documentation for the WinRT / Windows Universal versions of CloudBlockBlob?

I am developing a Windows Universal app in which I need to upload a FileItemThumbnail to Azure blob storage. One thing that is making this tricky is that I cannot find the correct documentation for CloudBlockBlob. For example in the documentation I can find
(https://msdn.microsoft.com/en-us/library/azure/microsoft.windowsazure.storage.blob.cloudblockblob.aspx) the method
UploadFromFileAsync has a number of overloads each including a System.IO.FileMode parameter. But System.IO.FileMode is not available under Windows Universal. Using the metadata in Visual Studio I see that the two overloads of UploadFromFileAsync available
to me are:
public IAsyncAction UploadFromFileAsync(StorageFile source);
public IAsyncAction UploadFromFileAsync(StorageFile source, AccessCondition accessCondition, BlobRequestOptions options, OperationContext operationContext);
Where do I find the documentation for the WinRT / Windows Universal version of CloudBlockBlob?

Hi,
You could refer the following links for documentation on uploading and downloading files from Azure Storage with Windows Universal App.
https://code.msdn.microsoft.com/windowsapps/Universal-Windows-Apps-1ea96689
https://code.msdn.microsoft.com/windowsapps/How-to-operate-Azure-blob-f0210e2e
http://blogs.msdn.com/b/webapps/archive/2014/09/24/upload-and-download-files-from-azure-storage.aspx
Hope this helps.
Regards,
Malar.

Where the converted servlet is stored?

Hi,
when a JSP page is requested by a client, it is internally converted into a servlet. So i would like to know where that servlet is stored....
I am using Tomcat server as web server.
thx,
-Soni.

It should be inside your web-inf (most probably in a temp directory) directory under your tomcat server directory... probably you could search for _jspfilename.class in your server directory...you would find the same
If you want to have a look at the source for the servlet generated with Tomcat 3.0 you need to change the isWorkDirPersistent attribute from false to true in the server.xml file found in your Tomcat directory.
after that you can load the jsp and then source would be available in the tomcatDirectory/work/port-number directory
Regards
G

Where can I find documentation for the HSP* Custom Functions

I can see a number of HSP functions are registered in Essbase but cannot find any documentation for them. I am reluctant to use them for client development without some proper documentation. Does anyone know where it can be found?
The functions are :
@HspNthMbr
@HspNumToString
@HspDateToString
@HspConcat
@HspMbrIndex
@HspMessage
@HspGetMbrCount
@HspCreateCDFSession
@HspRemoveCDFSession
@HspAddPageCombination
@HspCreateEssbaseServerFile
@HspWritePageCombinations
@HspGetFileName
Many of these look interesting. Some of them seem obvious, others might have a number of paramenters and options.
Any help appreciated.
Richard

Here is the contents of essfunc.xml. A little bit more information than what is available than in EAS; for example regarding function @HspGetMbrCount, it has a limited function prototype "@HspGetMbrCount(StringArray)" and purpose "Returns the member count of the range provided". I got this from Oracle/Middleware/user_projects/essbase1/EssbaseServer/essbaseserver1/java. You can view it more easily in Internet Explorer or vim.
<?xml version="1.0" encoding="utf-8" ?>
- <definitions version="6.2.0">
<macros />
- <functions>
- <function name="@HspNthMbr" tssec="1377715749" tsmcs="202567" javaSpec="com.hyperion.essbase.cdf.psb.HSPCDFUtils.getNthMember(String[],int)">
- <spec>
- <![CDATA[ @HspNthMbr(memberRange, PosIndex)
]]>
</spec>
- <comment>
- <![CDATA[ Returns nth member in the range provided
]]>
</comment>
</function>
- <function name="@HspNumToString" tssec="1377715749" tsmcs="224917" javaSpec="com.hyperion.essbase.cdf.psb.HSPCDFUtils.numToString(int)">
- <spec>
- <![CDATA[ @HspNumToString(NumericInput)
]]>
</spec>
- <comment>
- <![CDATA[ Returns String type value for the numeric value provided
]]>
</comment>
</function>
- <function name="@HspDateToString" tssec="1377715749" tsmcs="246968" javaSpec="com.hyperion.essbase.cdf.psb.HSPCDFUtils.dateToString(int)">
- <spec>
- <![CDATA[ @HspDateToString(NumericDateInput)
]]>
</spec>
- <comment>
- <![CDATA[ Returns String type date in DD/MM/YYYY format
]]>
</comment>
</function>
- <function name="@HspConcat" tssec="1377715749" tsmcs="268969" javaSpec="com.hyperion.essbase.cdf.psb.HSPCDFUtils.makeAString(String[])">
- <spec>
- <![CDATA[ @HspConcat(StringArray)
]]>
</spec>
- <comment>
- <![CDATA[ Returns a single string by concatenating all the values passed to it
]]>
</comment>
</function>
- <function name="@HspMbrIndex" tssec="1377715749" tsmcs="291290" javaSpec="com.hyperion.essbase.cdf.psb.HSPCDFUtils.getMbrIndex(String[], String)">
- <spec>
- <![CDATA[ @HspGetMbrIndex(String[], String)
]]>
</spec>
- <comment>
- <![CDATA[ Returns the member position in the dimension based on outline order.
]]>
</comment>
</function>
- <function name="@HspMessage" tssec="1377715749" tsmcs="315045" javaSpec="com.hyperion.essbase.cdf.psb.HSPCDFUtils.getURL(String[])">
- <spec>
- <![CDATA[ @HspMessage(StringArray)
]]>
</spec>
- <comment>
- <![CDATA[ Returns URL format of the message and parameters
]]>
</comment>
</function>
- <function name="@HspGetMbrCount" tssec="1377715749" tsmcs="335521" javaSpec="com.hyperion.essbase.cdf.psb.HSPCDFUtils.getMbrCount (String[])">
- <spec>
- <![CDATA[ @HspGetMbrCount(StringArray)
]]>
</spec>
- <comment>
- <![CDATA[ Returns the member count of the range provided
]]>
</comment>
</function>
- <function name="@HspDateDiff" tssec="1377715749" tsmcs="357494" javaSpec="com.hyperion.essbase.cdf.psb.HSPCDFUtils.dateDiff(int,int)">
- <spec>
- <![CDATA[ @HspDateDiff(fromDate, toDate)
]]>
</spec>
- <comment>
- <![CDATA[ Returns difference between two dates in days, inclusive of dates passed.
]]>
</comment>
</function>
- <function name="@HspDateRoll" tssec="1377715749" tsmcs="379014" javaSpec="com.hyperion.essbase.cdf.psb.HSPCDFUtils.dateRoll(int,int,int)">
- <spec>
- <![CDATA[ @HspDateRoll(startDate, noOfPeriods, periodType)
]]>
</spec>
- <comment>
- <![CDATA[ Returns the next date, resulting from adding noOfPeriods to StartDate.
]]>
</comment>
</function>
- <function name="@HspOffsetIdx" tssec="1377715749" tsmcs="400720" javaSpec="com.hyperion.essbase.cdf.psb.HSPCDFUtils.getDataOffsetIdx(long[],long[],long[],int,int,int)">
- <spec>
- <![CDATA[ @HspOffsetIdx(DataList, StartDateList, EndDateList, BaseValue, OffSet, BaseDate)
]]>
</spec>
- <comment>
- <![CDATA[ Returns the pointer to data which is nth distinct value, where n is the offset and for that data, gets relevant row based on date array.
]]>
</comment>
</function>
- <function name="@HspMbrList" tssec="1377715749" tsmcs="422891" javaSpec="com.hyperion.essbase.cdf.psb.HSPCDFUtils.getMemberList(String[],long[],int)">
- <spec>
- <![CDATA[ @HspMbrList(MemberList, DataList, ChkValue)
]]>
</spec>
- <comment>
- <![CDATA[ Returns the list of members, at positions corresponding to data same as ChkValue in DataList.
]]>
</comment>
</function>
- <function name="@HspNextAllocIdx" tssec="1377715749" tsmcs="445933" javaSpec="com.hyperion.essbase.cdf.psb.HSPCDFUtils.getNextAllocIdx(long[],long[],int)">
- <spec>
- <![CDATA[ @HspNextAllocIdx(dataList,unspAcc,counter)
]]>
</spec>
- <comment>
- <![CDATA[ Returns the pointer for the first row with no allocation or first row positive allocaction and not a modified row or total
]]>
</comment>
</function>
- <function name="@HspStringCompare" tssec="1377715749" tsmcs="469322" javaSpec="com.hyperion.essbase.cdf.psb.HSPCDFUtils.stringcompare(String, String)">
- <spec>
- <![CDATA[ @HspStringCompare(srcstring, trgtstr)
]]>
</spec>
- <comment>
- <![CDATA[ Does a string compare and Returns the true if sourcestring and target string are same.
]]>
</comment>
</function>
- <function name="@JDebug" tssec="1377715749" tsmcs="493564" javaSpec="com.hyperion.calcmgr.common.cdf.DebugFunctions.debug (int , String, String[], double , String)">
<flag value="RUNTIME" />
- <spec>
- <![CDATA[ @JDebug(action, returnAddr, str_array, dblInput, lineKey)
]]>
</spec>
</function>
- <function name="@JSendDebug" tssec="1377715749" tsmcs="521638" javaSpec="com.hyperion.calcmgr.common.cdf.DebugFunctions.sendDebug(int , String , String[] , double[] , String )">
<flag value="RUNTIME" />
- <spec>
- <![CDATA[ @JSendDebug(action, returnAddr, str_array,dblInput_array, lineKey)
]]>
</spec>
</function>
- <function name="@HspCreateCDFSession" tssec="1377715749" tsmcs="548082" javaSpec="com.hyperion.essbase.cdf.psb.HSPCDFUtils.createCDFSession()">
- <spec>
- <![CDATA[ @HspCreateCDFSession()
]]>
</spec>
- <comment>
- <![CDATA[ Creates and returns a unique session Id
]]>
</comment>
</function>
- <function name="@HspRemoveCDFSession" tssec="1377715749" tsmcs="578942" javaSpec="com.hyperion.essbase.cdf.psb.HSPCDFUtils.removeCDFSession(long)">
- <spec>
- <![CDATA[ @HspRemoveCDFSession(sessionId)
]]>
</spec>
- <comment>
- <![CDATA[ Removes the session with the provided sessionId
]]>
</comment>
</function>
- <function name="@HspAddPageCombination" tssec="1377715749" tsmcs="610001" javaSpec="com.hyperion.essbase.cdf.psb.HSPCDFUtils.addPageCombination(long, String[])">
- <spec>
- <![CDATA[ @HspAddPageCombination(sessionId, pages)
]]>
</spec>
- <comment>
- <![CDATA[ Adds a page combination
]]>
</comment>
</function>
- <function name="@HspCreateEssbaseServerFile" tssec="1377715749" tsmcs="640601" javaSpec="com.hyperion.essbase.cdf.psb.HSPCDFUtils.createEssbaseServerFile(long,String,String)">
- <spec>
- <![CDATA[ @HspCreateEssbaseServerFile(sessionId, appName, cubeName)
]]>
</spec>
- <comment>
- <![CDATA[ Creates a unique file on the Essbase server and returns the file path
]]>
</comment>
</function>
- <function name="@HspWritePageCombinations" tssec="1377715749" tsmcs="669640" javaSpec="com.hyperion.essbase.cdf.psb.HSPCDFUtils.writePageCombinations(long, String)">
- <spec>
- <![CDATA[ @HspWritePageCombinations(sessionId, fileName)
]]>
</spec>
- <comment>
- <![CDATA[ Writes all the page combinations with data to the file
]]>
</comment>
</function>
- <function name="@HspGetFileName" tssec="1377715749" tsmcs="705211" javaSpec="com.hyperion.essbase.cdf.psb.HSPCDFUtils.getFileName(String)">
- <spec>
- <![CDATA[ @HspGetFileName(filePath)
]]>
</spec>
- <comment>
- <![CDATA[ Returns the file name for the give path
]]>
</comment>
</function>
</functions>
</definitions>

Need to find the documentation for the Class used in E-recruiting

Hi all,
Can anyone please tell me where can i ge the documentation for all HRRCF classes?.
Thanks
Senthil

Found the answer. :-)

Tools to write documentation for the lazy guy?

Hi all, from some years i'm developing a graphical project, but i've never had the will to write the documentation.
...what a boring task.
But now that i think my project is quite complete and stable, the time has come.
What tools do you suggest? There are a lot of functions,menues,checkboxes and so on to write about, so the natural end would be an hypertext with images.
Any advice for the task?
Thanks!

It depends. What kind of application did you make and which what toolkit and what kind of documentation would you like to provide?
I wrote an application using wxWidgets, which includes a "Help Window" widget that just displays an HTML string. That made it super easy to provide graphical in-application help.
I wrote a couple of man pages (like for packer). I think those are kind of fun to make. I simply did an Internet search for "how to make a man page" or something. It was pretty easy to learn.
kokoko3k wrote:from some years i'm developing a graphical project, but i've never had the will to write the documentation. ...what a boring task.
Some people find programming boring and writing documentation to be an enjoyable contribution. If you release your program and people like it someone might write the documentation for you.

CGI Documentation for the WVC210 PTZ camera

Hi everybody,
I would like to get the OFFICIAL AND COMPLETE LIST OF CGI COMMANDS that can be used to control the Linksys WVC210 PTZ camera.
I could only find a partial (and possibly non-official) list of CGI commands for this camera at:
http://www.myhomeserver.com/?page_id=80
For documentation on how to control cameras made by AXIS, Trendnet, Intellinet and Genius see:
http://pablohoffman.com/cgi-bin/twiki/bin/view/Main/NetworkCameras
The following link can also be useful for developers of IP camera software:
Code Project: Camera Vision
http://www.codeproject.com/KB/audio-video/cameraviewer.aspx?fid=339699&df=90&mpp=25&noise=3&sort=Position&view=Quick&fr=51&select=2769826
That's all for now. Thanks for any help.
CLNJ

Hi,
Can you point me to these third party web sites? I could only find one site and the info there seems to be incomplete: http://www.myhomeserver.com/?page_id=80
I am aware that the LINKSYS makes the GPL code for the camera (firmware) availabe at their site.
However, it is very hard to me to understand why I should look through their code and try to find (or guess) the CGI commands that one could use to control the camera, a task that seems very cumbersome to me. Am I the only one that thinks this way?
Fortunately, there are manufacturers of similar products (in the same price range) that release documentation for advanced users and developers, that is, for those people whose needs are not satisfied by the packaged software that comes with the product and know how to go further. These manufacturers know that not everybody is a dumb happy user. I guess I am forced to give their products a good look.
Thanks,
CLNJ

Updated Documentation for the OEM WIN Embedded Pro 7

Hello,
We have a current configuration that is using WIN PRO EMBEDDED 7 SP1 32/64BIT EMB OEI.
I am having trouble finding updated documentation or support pages for the installation of this product. We have purchased the license and OEM discs from a authorized provider, but these discs were created in 2012. Is there a place to obtain updated documentation
for this product?
PS: Systems with this product installed are set to ship to the customer TODAY.
Thanks,
Justin

Based on your question, I am pointing you to resources that might help, which in this case is the SIM help files and a book I wrote specifically to help install POS Ready 7, Windows 7 and 8.x for embedded systems using SIM. Is there a problem or concern?
BTW - This forum is for POSReady. Unfortunately there is no specific forum for Windows FES other than the answers forum.
www.annabooks.com / www.seanliming.com / Book Author - Pro Guide to WE8S, Pro Guide to WES 7, Pro Guide to POS for .NET

Documentation for the convert servlet

Similar Messages

Maybe you are looking for