Documentation for Workbench Error Messages
Where is the documentation for all workbench error messages. The workbench help says to look in "Oracle 9iAS TopLink: Troubleshooting Guide". Does this documentation exist? If so, where is it?
Thanks.
The 9iAS documentation is available on OTN at:
http://download.oracle.com/docs/cd/A97688_13/index.htm#toplink
Similar Messages
-
Previously posted troubleshooting doesn't work for my error message "iTunes could not back up the iPhone because an error occured". What other options do I have to backup my iPhone data properly?
Hi there kchagape,
You may find the troubleshooting steps in the article below helpful.
iOS: Troubleshooting backup issues in iTunes
http://support.apple.com/kb/ts2529
-Griff W. -
Need a BADI for raising error messages for equi update (IE02)
Hi,
we are trying to raise few error messages while creating equipments through BADI's (Processing through IE02 and BAPI's).
No BADI's are supporting for raising error messages.
SAP doesnt support processing of userexits through BAPI's (refer note 564467).
we actually need to implement these checks and should available for all the below processes:
Through IE02
while doing through BAPI's
While Executing MASS CHANGE functionality (IE05)
Please suggest any other solution to achieve all the three at one go instead of creating some enhancements for every thing.
thanks.Hi,
Try and search for a BADI....for transaction I102...take the package name and go to SE18 and see if BADI's are available...
Alternatively search for key CL_EXITHANDLER or get BADI in the main program of IE02..
if you are using SAP ECC6.0 then implicit or explicit enhancements will be available... Utilize them to meet your requirement...
Thanks -
Mac: couldn't complete update for Ps error message 49 in Creative Cloud
Mac: couldn't complete update for Ps error message 49 in Creative Cloud. Anyone help?
A chat session where an agent may remotely look inside your computer may help
Creative Cloud chat support (all Creative Cloud customer service issues)
http://helpx.adobe.com/x-productkb/global/service-ccm.html -
How to select a locale for parser error messages
Does anybody know how I can select a locale for parser error messages? I found org.xml.sax.Parser.setLocale, but that's for SAX1 and deprecated.
I have a textarea in the user interface where a user can edit XML and, of course, I'd like the parsing error messages to appear in the selected locale...
Any help appreciated.
- MichaelYes, but doing this you changed the locale for the JVM! I know that. My intention was to see whether the parsers even had error messages in languages other than English. If they didn't then there would be no point in proceeding. But they do, so maybe there is some point.
However you don't get to specify the locale for exceptions thrown by other Java classes, so I wouldn't be surprised to find you don't get to specify the locale for exceptions thrown by XML parsers. I'm not saying there is no way to do that, only that I would not be surprised if there were no way. -
Why do I always have "Insufficent Content for Edit" error message ?
Hi all FCE experts,
May I ask why do I always have "Insufficent Content for Edit" error message when I tried to overwrite or replace a clip ?
Ok,this is what happen:
I have a clip A (4 secs) followed by clip B (4 secs). Then in between I add a video transition.
After a while, I reckon I want to change clip B with another clip (say clip C). So, I went to brower & search for clip C which is 2 mins long clip. To make sure there are enough handles, I went to the centre mark an In point then 4 sec later mark an Out point. So I drag this clips C of 4 secs from the Viewer (I marked the In & Out point in the viewer) to the Overlay canvas & do an Overwrite but it says "Insufficent Content for Edit".
I then tried Replace also got the "Insufficent Content for Edit" error message.
I then tried to delete the video transition and repeat the above for overwrite and replace, both times I got the same error.
Any ideas ?
ThanksTom Wolsky wrote:
From your description there is no way either of these things should happen. Without seeing it I would guess there is something else going in your timeline or your clip which you're not telling us. *Perhaps there are I/O pints marked in the timeline*. Or the destination tracks are not set correctly. or something else.
Thanks Tom, you are correct.
I have In Point & Out Point marked on the Timeline. I used it when I did FILE > EXPORT and left it there. But once I cleared it, I am able to replace it with another clip.
But I am still puzzled as to why I cannot do any overwrite or replace when there is I/O points marked on the Timeline ? Especially when the section of clips I wanted to overwrite or replaced are located outside of the I/O points ?
Thanks -
No Matching Connection for ICMP Error Message
I am running into a little bit of an issue with my Clean Access Deployment. We are using a pair of 5520s in conjunction with Clean Access deployed in L3 gateway mode. My active ASA is constantly displaying the message "No Matching Connection for ICMP Error Message source Clean Access Manager destination some client on our VPN subnet." I understand during discovery the Clean Access Agent will ping the Manager, however what I can't understand is why the CAM continues to send ICMP unreachable messages to some clients. It may send hundreds of these messages over a period of two or three minutes. Any ideas?
I am running into a little bit of an issue with my Clean Access Deployment. We are using a pair of 5520s in conjunction with Clean Access deployed in L3 gateway mode. My active ASA is constantly displaying the message "No Matching Connection for ICMP Error Message source Clean Access Manager destination some client on our VPN subnet." I understand during discovery the Clean Access Agent will ping the Manager, however what I can't understand is why the CAM continues to send ICMP unreachable messages to some clients. It may send hundreds of these messages over a period of two or three minutes. Any ideas?
-
ORA-01401 and ORA-12899 : "too large for column" error messages
I posted this already in the Database - General forum.
Sorry for the double post.
For the past 8hours, I have been googling about
the related ORA-01401 and ORA-12899 error
messages.
I noticed that ORA-01401 had been removed from the list
of error messages in Oracle 10g documentation.
http://download-west.oracle.com/docs/cd/B14117_01/server.101/b10744/e900.htm#sthref30
And, ORA-12899 has been added.
http://download-west.oracle.com/docs/cd/B14117_01/server.101/b10744/e12700.htm
1. Is there an official Oracle document (e.g. release notes) stating such facts? If so, please provide the link.
2. Why did Oracle change the error code and not just update ORA-01401?
3. Someone posted in http://asktom.oracle.com/pls/asktom/f?p=100:11:0::::P11_QUESTION_ID:7143933880166
Even if installed Oracle is 10g, when he tried to "insert a 100 into a number(2).",
he supposedly got ORA-01401. So, is ORA-01401 still part of 10g or not?
I have yet to confirm this myself.
Sorry for being meticulous. Our customer just wants to know the
information for the 2nd question. It's hard to convince them without
showing official documents.
Thanks!1)
Well, go to Metalink and check out Note 119119.1 (B.4) and Note:287754.1
2)
Such details are seldom published. One guess is what they changed altered the reason behind the message so using the same code would be a bad idea.
3)
If you are referring to the occurrence of ora-1401 from a select on a XE db, that may be a bug. -
SAVE_TEXT for long error Message not working.
Hi Experts,
I am Using SAVE_TEXT FM to Dynamically Change Long Text for a message.
1. i am able to run succesfully SAVE_TEXT with SY-SUBRC = 0.
2. I can see the entry in STXH.
3. I have also performed COMMIT_TEXT with all the parameters and COMMIT_WORK.
4. I am able to See the changed Text using READ_TEXT FM.
but if i go to SE91 to the message no. and see long text i am not able to see the changed text.
also when change the long text of it in a program and call the error message we should be able to see the changed long text on click of error message in status bar but it shows the same message as in SE91.
Earlier for this Text Object & Text ID in SE75 Save mode was SPACE so i changed the same to Update still its not working.
Following are the details of my code-
REPORT YTEST_MES message-id ZFQM.
parameters : p_text type c.
at selection-screen.
if p_text <> 'C'.
data: HEADER LIKE THEAD.
data: t_lines type standard table of TLINE.
data: ls_lines like line of t_lines.
ls_lines-TDFORMAT = ' '.
ls_lines-TDline = 'TEST1 TEST2 TEST3'.
append ls_lines to t_lines.
Header-TDOBJECT = 'DOKU'.
Header-TDNAME = 'ZFQM093'.
Header-TDID = 'NA'.
Header-TDSPRAS = 'EN'.
Header-TDFORM = 'S_DOCU_SHOW'.
Header-TDSTYLE = 'S_DOCUS1'.
Header-TDLINESIZE = '72'.
CALL FUNCTION 'SAVE_TEXT'
EXPORTING
CLIENT = SY-MANDT
header = header
INSERT = 'X'
tables
lines = t_lines
EXCEPTIONS
ID = 1
LANGUAGE = 2
NAME = 3
OBJECT = 4
OTHERS = 5
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CALL FUNCTION 'COMMIT_TEXT'
EXPORTING
OBJECT = 'DOKU'
NAME = 'ZFQM093'
ID = 'NA'
LANGUAGE = SY-LANGU
COMMIT WORK AND WAIT.
message e093 with 'C' 'XXXX'.
endif.
I have tried calling SAVE_TEXT will possible combination's of INSERT = 'X' or space or
SAVEMODE_DIRECT = 'X' or Both Space or 'X'.
I know i am missing a small thing...but was unable to figure out the same.
Please Help.
Regards,
AkashHi Keshav.T ,
Thanks for your answer, but all the above FM u provided-
read_text
init_text
edit_text
Cannot be used as-
Read_TEXT - I want to change Text not read it.
INIT_TEXT- this cannot be used to change texts.
EDIT_TEXT- this function module Opens the Long text screen
and we have to manually save it, but i want to save the text automaticaly
all this is done using SAVE_TEXT.
Only problem is I am missing something after the call of SAVE_TEXT because text is changed
as i can see that using read_text FM but if i go to SE91 and see long text for the corresponding message no. i cannot see the
changed text done bu SAVE_TEXT.
Please help.
Akash -
I just installed PSE8 for Mac running OSX 10.5.8. When I click on PSE I get an error message "There was an error opening this document. The file is damaged and could not be repaired". I'm not trying to open any documents, just the program. When I create a new file I continue to get the message. I can open pictures and edit them, but this message keeps on appearing every time I want to create a new document. Any suggestions?
Did you install from an administrative account? Did you disable any antivirus software (if you use it) before installing?
-
I keep getting this error message over and over when all I have plugged in is an Apple USB keyboard and Apple Mouse. Please help...this is crippling the computer!
Sometimes you have to reset the SMC two or three times for it to work, don't know why. I've seen that error message before and 100% of the time it was fixed with an SMC reset. I suppose it's possible that your keyboard or mouse IS drawing too much power, do you have access to another you could try?
-
Error message on updates for CS6, error message on updates for CS6
I've been having major issues with CS6 as well as CC - started with both versions of photoshop locking up, then totally refusing to open. Uninstalled both versions, just reinstalled CS6 but it is not opening unless I hit the shift key while initiating, then it refused to open a raw file so I went in to update to accomodate my camera and got these error messages. I have been without a working photoshop program for what seems like a very long time and this is beyond acceptable. Tech support was not helpful.
Adobe Bridge CS6 5.0.2 Update
There was an error installing this update. Please quit and try again later. Error Code: U44M1I200
Extension Manager 6.0.8 Update
There was an error downloading this update. Please quit and try again later. Error Code: U43M1U49
Adobe Bridge CS6 5.0.2 Update
There was an error installing this update. Please quit and try again later. Error Code: U44M1I200
Photoshop 13.1.2 for Creative Cloud
There was an error installing this update. Please quit and try again later. Error Code: U44M1I200
Photoshop Camera Raw 8.4(CS6)
There was an error downloading this update. Please quit and try again later. Error Code: U43M1U49
Adobe CSXS InfrastructureCS6
There was an error installing this update. Please quit and try again later. Error Code: U44M1I200
Dynamic Link Media Server CS6 1.0.1 Update
There was an error installing this update. Please quit and try again later. Error Code: U44M1I200Hello Mitch4815,
Thank you for reaching out for assistance with the New Feeds on your new Droid Bionic. I too own this device and I hope that you are as happy with yours as I am with mine. I've subscribed to the Reuter's Technology News on my Bionic so I can stay in the know on the latest and greatest rumors in the wireless world. Not only is it my job but I enjoy reading the speculation on the latest and upcoming devices. Needless to say I've had an experience that's similar to yours.
When I received a subscription error, I had to do a factory data reset on my new Droid Bionic in order to successfully subscribe to the News Feeds. Although I do recommend that you try this, let's save this step as a last resort. Please try to remove the battery while the device is powered on & re-insert then power the device on. Afterwards, verify that you have a good 3G/4G signal, anything more than 2 bars. If you are still experiencing access issues then the factory data reset would be the next step. Here is a link on how to perform a factory data reset on a Droid Bionic.
http://support.verizonwireless.com/clc/devices/knowledge_base.html?id=46649
Of course you will have to reactivate your device after the factory reset. Prior to completing the reset I recommend verifying that your contacts are backed up on either backup assistant or on your Gmail account. Also, your pictures, videos, and music will be saved on the memory card so this info is not in danger. After you have completed the steps above, please reply to this message as your experience may help others.
Thank you for being the best part of Verizon Wireless. -
Help diagnose Crystal Reports for Enterprise error message
When I attempt to open a specific report from our server using CRE, I receive the error message: "Unable to Open Report", "A problem occurred while opening the report from the server." "Please contact your server administrator."
The report runs fine as part of a publication. I have been able to make copies of the report on the server, but CRE will not open the copies either.
Can anyone please point this newish BOE/CRE user in the right direction for finding a solution to this problem? Where can I look for further information about what the error really means.
THANKS!
Carl LanceHi Abhilash,
I am able to open and edit other reports on the server without problem. I believe that they are the same version and pack. Here are my versions:
CR for Enterprise Version 14.1.3.1257, Build 2013 Support Pack 3.
SAP BusinessObjects BI Platform 4.1 Support Pack 3, Version 14.1.3.1257
When CRE displays an error like this, is there further information in a log or recorded anywhere else? How does one go about finding details? -
How to exclude "Blocked for Purchase" error message in PO creation for particular Order Type
In Article master some times we used to set Site-Specific Article Status = '01'. (MARC-MMSTA)
01
Blocked for Purchase
02
Blocked for Purchase/Sale
My requirement is that when Creating PO in ME21N for a particular Order Type (Purchasing). This check need to be removed.
Now if we try creating the PO we will be getting the below error message.
Status "Blocked for Purchase" of article XXXXXX does not allow external procurement.
Is there any exit or BADI where i can put logic to remove this check.Hi ,
You can use BADI ME_PROCESS_PO_CUST or customer exist EXIT_SAPMM06E_013
Regards,
Pravin -
Setting up a dailog box for an error message
Hello everybody
we need to display the error message that is being displayed at the bottom of the window in the portal through a pop up box.Is there a property that can be changed for an error to appear as a pop up instead of in the status bar.We are in EP6.0 SP2.
any help is appreciated greatly.
ThanksThis issue can be caused by an extension that isn't working properly.
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode
*https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes
Maybe you are looking for
-
Hi we have just done an EHP5 upgrade on ERP but we seem to getting an error on PPM that reads as below, if anyone had once experienced this please assist as to how your fixed it. Error while processing your query What has happened? The URL call http:
-
Is there a way to unblock html images in e-mail
we're using comexp (sun messaging server 6.2-3.04). When our users receive e-mail with html content, the images are blocked. Is there a way to unblock the images? When the e-mail is forwarded to an external account that has the facility to unblock im
-
How to import from desktop (file) avchd in FCE4.0.1
I copied from a camera onto my macbook avchd footage for later use in FCE4. I used the importcommand log and transfer. I have three maps; DCIM (empty), MISC (AUTPRINT.MRK) and PRIVATE with a lot of files. I tried all the maps (or files in it) to drag
-
Blank First Page in Sub Report
Hi, My sub report display the first page blank with data starting from the second page. The first page just displays the Report Header. How can I fix this? Thanks. Reena
-
Home page in internet explorer
Can anyone tell me why it is that when i open internet explorer the homepage is blank? I have to refresh the page to get the homepage to appear?