Documentation in WebDynpro ABAP

Hello Experts,
I have a requiment to diplay the documentation for specific object when i press on a button in WebDynpro ABAP how can i do this please help me,

Hi,
for information on help texts, see the [documentation|http://help.sap.com/saphelp_nw70ehp1/helpdata/en/44/336208da18060be10000000a155369/frameset.htm]
Regards, Heidi

Similar Messages

Webdynpro ABAP & JAVA step by step example

hi experts,
i am new in webdynpro. i want to learn webdynpro so any one plz help me how to create,how to install,connect,and how to execute plz send any documents for webdynpro ABAP & JAVA step by step examples with screen shots.it's really helpful for my carrier.
thanks and regards,
sapbbm.

Hi Bala,
Go through the below link,
https://www.sdn.sap.com/irj/sdn/developerareas/abap?rid=/webcontent/uuid/fed073e5-0901-0010-4eb4-c9882aac7b11 [original link is broken]
Here u can find 6 tutorial applications on Webdynpro Abap with step by step procedure, Using this u can start of with Webdynpro from the basics.
Along with this u can find good documentation in,
http://help.sap.com/saphelp_erp2005/helpdata/en/f6/501b42b5815133e10000000a155106/frameset.htm
Hope this helps,
Regards,
Sachidanand.B

To integrate the Adobe form in webdynpro ABAP

Hi Experts,
How to use the adobe form in Webdynpro ABAP?
Thanks & regads
Vino

That is quite the general question and I think if you search SCN you will find many resources - such as videos, tutorials, how-to guides, documentation - on the subject. Perhaps just starting with the online Help and the associated links form the help article will get you started:
http://help.sap.com/saphelp_nw70ehp1/helpdata/en/0f/128841e8231709e10000000a155106/frameset.htm

How to use webdynpro abap? need separate software? or please help me.. :-)

How to use webdynpro abap? need any separate software? if no, please help me with Transaction Codes..
Thanks in Advance
-Parthi
Moderator message: please search for available information/documentation.
Edited by: Thomas Zloch on Oct 19, 2011 8:18 PM

I don't think you quite understand how hibernation mode works.
"The state of a computer is stored into its main memory, which is also called RAM. When a
computer is powered off, the contents of this memory are irremediably wiped out. Hiberna-
tion works in the following way: before being powered off, the computer saves all the con-
tents of the memory to a ﬁle on the hard disk drive. On wake up, data stored in this ﬁle is
read out and restored to the memory. Therefore, the RAM contents are the same before
and after the hibernation process, and the state of the computer is also the same. The
saved ﬁle is named sleepimage, and is located in the /private/var/vm directory. Hi-
bernation is sometimes also called “software suspend” or “suspend to disk”.
The default suspension feature of Mac OS X, called sleep works in a different way. When
entering sleep, every subsystem of the computer is shut down, except the main memory
which is still powered. This process preserves the contents of the memory, and allows the
computer to wake up quickly. However, a sleeping computer still consumes a small
amount of power. Sleep is sometimes also called “hardware suspend” or “suspend to
RAM”.
Apple introduced the safe sleep feature in Mac OS X 10.4.3 for the Powerbook HD line of
laptops. This feature is a variation of the default suspension behavior. The main memory is
still powered during the sleep, but the contents of the memory are also saved to the disk at
the beginning of the operation. The saved ﬁle will only be used if the laptop runs out of bat-
tery power while sleeping, in order to restore the original state of the computer.
This safe sleep feature is what makes hibernation possible in Mac OS X 10.4.3 and above."
Quoted from *Deep Sleep v. 0.7 documentation*
Matthieu Beaumel, 10/03/2006

Books and Documentation on Webdynpro for Java

Hi,
I'am planning to start developing Webdynpro for Java applicatios.I know only Core java and iam not familiar with J2EE.I need some help on this.Any books on webdynpro for java basics and any documentation avail and prerequisite befor going to strat developing Webdynpro for JAVA
Can anybody please give me suggestions on this.
With Regadrs
Praveen

What is Webdynpro?
What is Web Dynpro?
Webdynpro Sample Applications and Tutorialshttps://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/49f2ea90-0201-0010-ce8e-de18b94aee2d
SAP WebAs Samples And tutorials
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/webcontent/uuid/7d646a6c-0501-0010-b480-bf47b8673143 [original link is broken]
Basis Webdynpro tutorials....
http://help.sap.com/saphelp_erp2005/helpdata/en/15/0d4f21c17c8044af4868130e9fea07/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/e9/1fc0bdb1cdd34f9a11d5321eba5ebc/frameset.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/3a/d08342a7d30d53e10000000a155106/frameset.htm
Web Dynpro Sample Applications and Tutorials:https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/webcontent/uuid/28113de9-0601-0010-71a3-c87806865f26?rid=/library/uuid/49f2ea90-0201-0010-ce8e-de18b94aee2d [original link is broken]
http://searchsap.techtarget.com/searchSAP/downloads/SAPPRESS.pdf
Check the following thread u can get lot of materials,
WeB Dynpro Documents
Refer these linkshttps://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/webas/web%20dynpro%20tutorial%20and%20sample%20applications.faq
Why WebDynpro ?Why WebDynpro ?
Why webdynpro and not BSP or JSP?
Why webdynpro and not BSP or JSP?BSP to WEB Dynpro
BSP to WEB Dynpro
Benifits of using Webdynpro Benifits of using
Webdynpro
Java vs. ABAP WEbDynpro Java vs.
WebDynpro ABAP
regarding Java related webdynpro
Regarding Java related Web Dynpro vs. Struts - a few questions
Web Dynpro vs. Struts - a few What kind of applications are being developed with Web Dynpro?
What kind of applications are being developed with Web Dynpro?
http://www.sappro.com/downloads/OptionComparison.pdf
Hop this will helpful for u..
Urs GS

WebDynPro ABAP - Infrastructure Needed

Hello Folks,
ECC 6 enables programming in WebDynPro for ABAP. On the Java side, you need to have a NetWeaver AS-Java system for it and it is recommended to program on WebDynPro for Java on a separate AS-Java than the one that runs the Portal so as to not load up Portal server and keep it light.
1) Is that true for WebDynPro for Abap too? Do we need to set up a parallel landscape to our ECC landscape of AS-ABAP servers to run WebDynPro for ABAP while ECC does what its best at (ERP) ?
2) Is there a concept of SLD for WebDynPro-ABAP?
3) Is it true that SAP stopped doing future business packages in WD-Java and focusing only on WD-ABAP?
Thanks in advance,
Kiran

Hi,
for information on installation and configuration, see the [documentation|http://help.sap.com/saphelp_nw70/helpdata/en/43/e86de5008b4d9ae10000000a155369/frameset.htm].
See also :
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/80965596-d91c-2a10-5fa4-95302ec186e6
Regards, Heidi

Portal Workprotect in Talent Profile - WebDynpro ABAP FPM application

We are trying to implement Workprotect in ESS - Talent Profile application (HRTMC_EMPLOYEE_PROFILE). The requirement is that when user had entered data in either Internal work experience, External Work experience or other tabs; before he has saved the data, if the user clicks on some other link in portal or try to close the window, Portal work protect that is enabled should prompt the user to save the data or risk losing data.
What has been done so far:
1. Enabled Workprotect on Portal:
Step 1: In the portal, go to System Administration -> System
Configuration -> Service Configuration.
Step 2: In the portal catalog, Select
application "com.sap.portal.epcf.loader" and open the properties for
service "epcfloader" for editing
Step 3: Set property workprotect.mode.default = 3
Step 4: Save -> Restart service
Now, Portal Work protect is enabled.
2. On the Talent application end, I have seen many posts in forum & FPM related workprotect documentation. But, it is not clear as to how this actually works when it comes to FPM application.
The documents says FPM allows application to make use of work protect
mode offered by Portal. To achieve this, the application must u2018tellu2019 the
FPM whether it contains unsaved
(u201Cdirtyu201D) data. For this, the FPM provides the Web Dynpro Interface
IF_FPM_WORK_PROTECTION. In the is dirty method, you have to put
METHOD is_dirty.
if * component contains unsaved data
ev_dirty = abap_true.
else.
ev_dirty = abap_false.
endif.
ENDMETHOD.
Questions:
1. If you see the shared application component HRTMC_TP_SHARED_DATA, it implements interface IF_FPM_WORK_PROTECTION. But, the isdirty method in the component controller has already existing code
METHOD is_dirty.
ev_dirty = wd_this->mv_is_dirty.
ENDMETHOD.
Where should we put the code given below as described in FPM documentation. In shared component or in individual components like HRTMC_TP_WORKEXP_INTERNAL, HRTMC_WORKEXP_INTERNAL, HRTMC_TP_EDUCATION
etc.
METHOD is_dirty.
if * component contains unsaved data
ev_dirty = abap_true.
else.
ev_dirty = abap_false.
endif.
ENDMETHOD.
And, the line "* component contains unsaved data" as described in document- how do we code this for talent profile considering that there are multiple components, shared component etc? My requirement is that if user has entered some data in any of the tabs like internal work experience, external work experience, then work protect should work if
user tries to navigate away or close browser.
2. If you see general documentation for Work protect and webdynpro (not for FPM), it says that the application must define a special status (dirty flag), which tells the portal when there is unsaved data. You can set and cancel this status (TRUE, FALSE) using method
SET_APPLICATION_DIRTY_FLAG in interface IF_WD_PORTAL_INTEGRATION.
And it goes on to say that one must set application flag dirty
SET_APPLICATION_DIRTY_FLAG
exporting
DIRTY_FLAG = TRUE | FALSE
and also set work protect mode
call method L_PORTAL_MANAGER->SET_WORK_PROTECT_MODE
exporting
MODE = NONE | APPLICATION_ONLY | BOTH
3. Which is the correct way to enable Work protect in case of Talent profile applications? Which method of which component should should we add code to? Which of the above ways should we follow ( Interface IF_FPM_WORK_PROTECTION or IF_WD_PORTAL_INTEGRATION) ? Which component and which method should we Set Work protect and Set isdirty
Please advise.

Hi Experts,
Can you please provide some useful info in implementing work protect in Standard FPM WebDynpro ABAP applications? In this case, as mentioned above, the application is ESS Talent Profile application (HRTMC_EMPLOYEE_PROFILE).
Thanks,
Sandeep

Interactive chart in Webdynpro ABAP

Hi Experts,
I would like to use this thread to discuss on SAP's recommendation to develop Interactive chart in Web dynpro ABAP .
Correct me if Iam wrong ,
1) Business graphics can not be made interactive.
2) With Gantt UI element ( I couldn't find documentation ).
3) Interactive Chart in FPM ?
4) Interactive Chart using FLEX Builder ?
5) HTML Island ? Though not available for Customers with lower version of SAP ?
What is SAP's Road map w.r.t Interactive chart in Webdynpro ABAP ?
Regards,
Karthi M

Hi Stuart,
Business graphics can be made interactive only with click action.
Gantt UI , Iam not finding any proper documentation. Cursing SAP for that.
If you are lucky enough to have latest version of SAP. Try with SAP UI5 which has got very good interactive capabilities of graph.
Regards,
Karthi M

Dump in Webdynpro abap. CL_GUI_FRONTEND_SERVICES

Hi ,
my requirement is to copy the clip board data and bring that to internal table.
i have created the Function module for that inside that i have used CL_GUI_FRONTEND_SERVICES=>CLIPBOARD_IMPORT method.
My function module is working fine when i executed in se37. i used the same FM in a Se38 program and its working fine there also.
but when i used the same in webdynpro component it is giving dump.
Can any one help me !!!
Thanks
dhinesh.
The /sap/bc/webdynpro/sap/zmxx_ap_ops was not called due to an error.
Note
The following error text was processed in the system GRD : Exception condition "CNTL_ERROR" raised.
The error occurred on the application server bdhn4751_GRD_11 and in the work process 1 .
The termination type was: RABAX_STATE
The ABAP call stack was:
Method: CLIPBOARD_IMPORT of program CL_GUI_FRONTEND_SERVICES======CP
Function: ZMXX_OPN_MULT_SELECTION of program SAPLZMXX_OPN_FGROUP
Method: ONACTIONONVIEW of program /1BCWDY/MC5EL1ZZ4FF51IFEMMKF==CP
Method: IF_WDR_VIEW_DELEGATE~WD_INVOKE_EVENT_HANDLER of program /1BCWDY/MC5EL1ZZ4FF51IFEMMKF==CP
Method: INVOKE_EVENTHANDLER of program CL_WDR_DELEGATING_VIEW========CP
Method: IF_WDR_ACTION~FIRE of program CL_WDR_ACTION=================CP
Method: DO_HANDLE_ACTION_EVENT of program CL_WDR_WINDOW_PHASE_MODEL=====CP
Method: PROCESS_REQUEST of program CL_WDR_WINDOW_PHASE_MODEL=====CP
Method: PROCESS_REQUEST of program CL_WDR_WINDOW=================CP
Method: EXECUTE of program CL_WDR_MAIN_TASK==============CP
Error Analysis :
A RAISE statement in the program "CL_GUI_FRONTEND_SERVICES======CP" raised the
exception
condition "CNTL_ERROR".
Since the exception was not intercepted by a superior
program, processing was terminated.
Short description of exception condition:
For detailed documentation of the exception condition, use
Transaction SE37 (Function Library). You can take the called
function module from the display of active calls.

Hi dinesh ,
WDA does't have clipboad Functions & you cannot use the CL_GUI_FRONTEND_SERVICES because of the below reason
The class CL_GUI_FRONTEND_SERVICES supports the SAP GUI for Windows, the SAP GUI for the Java Environment and the SAP GUI for HTML. WebDynpro applications are not supported.
you can refer Thomas answer in below link .
[upload from clipboard option in webdynpro abap selection screen|upload from clipboard option in webdynpro abap selection screen]
alternatively you can achive using ABAP memory
creat a button for COPY ..inside that Export the value to the memory ID
and create a button for paste and import the value using the memory ID
Regards
Chinnaiya P

Webdynpro ABAP application integration with portal

Hi,
      Can someone provide me the complete documentation for
       1. webdynpro ABAP application development and
       2. webdynpro ABAP application integration with enterprise portal.
Thanks...
Kundan

hi Kundan ,
design pattern or paradigm followed by Webdynpro ABAP is
MVC concept
           M-Model
           V- View
            C-Controller
and cms with the advantages like Structuring the programming
     Creation of easily manageable application blocks
     Reusability of whole components
for more documentation about WD ABAP , refer
http://help.sap.com/saphelp_nw2004s/helpdata/en/7c/3545415ea6f523e10000000a155106/frameset.htm
https://www.sdn.sap.com/irj/sdn/nw-ui?rid=/webcontent/uuid/fed073e5-0901-0010-4eb4-c9882aac7b11 [original link is broken]
SAP netweaver provides the integrationof ESA , for integartion netweaver provides us wid the People Integartion
refer
http://help.sap.com/saphelp_nw70/helpdata/en/77/3545415ea6f523e10000000a155106/frameset.htm
as well
I hope it helps
rgds,
amit

Uploading and downloading files in webdynpro abap

how to up load axl file and download file in webdynpro abap application .

Hello Pradeep,
you might see the following documentation for [Download|http://help.sap.com/saphelp_nw70/helpdata/EN/09/a5884121a41c09e10000000a155106/frameset.htm] and [Upload|http://help.sap.com/saphelp_nw70/helpdata/EN/b3/be7941601b1d09e10000000a155106/frameset.htm] containing also names of Web Dynpro Components as reference.
Best regards,
Andreas

Floor Plan Manager in Webdynpro ABAP

Hello,
I want to create a Webdynpro ABAP Application based on FPM (Floor Plan Manager) and using UI BB(User Interface Building Blocks). Are there good tutorials/demos on the same.?
Any help would be highly appreciated.
Thanks.

Hi
Please go through this...
it gives documentation.
http://help.sap.com/saphelp_nw70ehp1/helpdata/en/9f/95467bbefc4a808fffeba4c5177258/content.htm
http://help.sap.com/erp2005_ehp_02/helpdata/en/4b/fbb33af3014fdcbde5df8c408cd8b1/frameset.htm
How to create.
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/90f3cfd2-46d0-2b10-b3ab-eabf3452cc50
https://wiki.wdf.sap.corp/display/FPM/Home
and we have seperate forum for FPM.. check
Floorplan Manager for Web Dynpro ABAP
Hope it might help you,
Thanks,
Kris.
Edited by: kissnas on Feb 17, 2011 6:11 AM

ESS MSS Travel & Expenses Customization in WebDynpro Abap

Hi Friends,
I have a requirement to customize the Travel & Expenses module in WebDynpro Abap. Please let me know the standard package (whcih contains webdynpro component) in WebDynpro Abap for this.
And give me some documents which contains steps to customize the standard screens.
Thanks & Regards,
Lakshmi Prasad.

The forum just died on me and my post was discarded, so here's the short form:
Packages: PTRM_WEB_UI, PTRM_WEB_POWL.
My advice: Don't narrow this down on packages, there are numerous used Components in numerous packages you'll inevitably find whilst forward-navigating the the respective Views of the Applications you want to use/configure.
Customizing: Sorry, nothing specific here. The IMG documentation was sufficient for me.
Enhancements: Here's a link I found to be useful. Maybe you'll come across Enhancing some Applications as well:
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/e07268c2-f61b-2e10-05a5-cd4bddfd1980
hope it helps, regards,
Lukas

WebDynpro ABAP : Table with DropDownByKey does not have neat focus

Hi Experts,
I have a table, with one column of type dropdownbyKey, i need this so that i can display the DESCRIPTION rather than key. Issue is when i select a ROW in this table i see a special YELLOW BG COLOR on all columns except the column that has drop down by key it is first thing enduser points out as issue ???
Any help would attract points

>
ramkumarvalluru wrote:
> Hi Eureka,
>
> I am new to webdynpro abap area.Please provide me step by step procedure for working on Dropdown by key,Check boxes Radio buttons aand all UI elements.
>
> Please provide me.
First of all, please don't attach new questions to existing threads. Second asking for step by step procedures on all UI elements is really outside the scope of a forum posting and asking for too much. If you are that new to Web Dynpro ABAP, then start by reading the online documentation, the WDA WIKI section, and the WDA eLearnings.

Webdynpro ABAP Naming Conventions

Hi All
Can any body help me with writing Naming Conventions for development in Webdynpro ABAP. Is there any documentation regarding this........any help will be highly appreciated.
cheers
AJ

I use these that were suggested in the Web Dypro for ABAP book.
View Element     ID Prefix     Example
Business Graphics     BGR_*     BGR_SALES
Button                     BTN_*     BTN_SAVE
ButtonRow                     BTR_*     BTR_DETAILS
Caption                     CPT_*     CPT_COLUMN
DropDownByIndex     DDI_*     DDI_COUNTRY
DropDownByKey     DDK_*     DDK_REGION
FileUpload      FUD_*     FUD_CONTRACT
Group                     GRP_*     GRP_FORM
HorizontalGutter     HOG_*     HOG_ROADMAP
InputField                     INP_*     INP_NAME
InteractiveForm     IFO_*     IFO_CUSTOMS
Label                     LBL_*     LBL_INPUT
LinkToAction     LTA_*     LTA_SEARCH
LinkToURL                     LTU_*     LTU_VENDOR
RadioButton     RBT_*     RBT_MALE
RadioButtonGroupByIndex     RBI_*     RBI_GENDER
RadioButtonGroupByKey     RBK_*     RBK_TYP
RoadMap                     RMP_*     RMP_DIMENSIONS
RoadMapStep     STP_*     STP_DIMENSION
Table                     TBL_*     TBL_ADDRESS
TextEdit                     TXE_*     TXE_INFO
TextView                     TXV_*     TXV_INTRO
TimedTrigger     TTR_*     TTR_NOTIFY
TransparentContainer     TCO_*     TCO_TABLE
Tray                     TRY_*     TRY_FORM
Tree                     TRE_*     TRE_SIMPLE
TeeeNodeType     TNT_*     TNT_FOLDER
TreeItemType     TIT_*     TIT_FILE
ViewContainerUIElement     VCU_*     VCU_ROADMAP
Window                     W_*     W_DEFAULT
View                     V_*     V_DEFAULT
Inbound Plug     IP_*     IP_START
Outbound Plug     OP_*     OP_EXIT
Apologies for the formatting but the table won't paste properly in plain text - only on IE6 here.
Edited by: Ian Stubbings on Jul 3, 2008 12:02 PM

Documentation in WebDynpro ABAP

Similar Messages

Maybe you are looking for