Documentation Issue? Missing IIS Websites

Hi,
Curious if this is a documentation issue or I'm actually missing some web sites. This implementation is CM integrated.
According to this page (Link) for MBAM 2.5, I'm supposed to have the MBAMAdministrationService,MBAMComplianceService and MBAMRecoveryAndHardwareService IIS sites. This information is
listed under the Stand-Alone implementation of MBAM though (not ConfigMgr Integrated). Currently I have the following -
HelpDesk
MBAMAdministrativeService
MBAMRecoveryAndHardwareService
MBAMUserSupportService
SelfService
Notice that I'm missing MBAMComplianceService.
Under the ConfigMgr section, there is nothing about validating the web services in IIS. I know that the compliance portion is technically covered by ConfigMgr, but verification that I have the rest covered would be nice in the documentation.
Any thoughts? Am I covered?
Thanks!
-Michael

In the CMIntegration topology, the compliance reporting will be handled by SCCM itself. You can see two new configuration baseline gets created after the installation along with a collection dedicated to MBAM.
There will not be any IIS Site for the compliance reporting. You can view compliance reporting for machines using SCCM reporting. There will a separate section for all MBAM Reports.
Also don't define the endpoints for the Compliance Reporting in the MBAM GPOs (Client management) in CM Integration topology.
Regards, "Gaurav Ranjan" =========== NOTE: Mark as Answer and Vote as Helpful if it helps =======

Similar Messages

All source codes of jmf documentation are missing ?

Hello,
I'am learnig jmf by reading the jmf documentation in the oracle website.
But all source codes in jmf documentation are missing because the website is oracle, and not sun.
For example, in this page http://www.oracle.com/technetwork/java/javase/documentation/swingjmf-176877.html ,
the link of MDIApp.java source code is broken ( http://java.sun.com/javase/technologies/desktop/media/jmf/2.1.1/solutions/MDIApp.java ).
So where are all source code of jmf documentation ?
Thank you.

Hi,
I am trying to learn Java Media Frame work and am looking for the source to MDIApp.java.
The link is broken.
Please can you guys post the source code.
Thanks

MacBook Air intermittently has issues connecting to websites when wireless shows connected to the internet. The pages show that I am offline, but I can ping Google DNS. Windows PC, iPhone and Android phone have no issue displaying the same web pages.

MacBook Air intermittently has issues connecting to websites when wireless shows connected to the internet. The pages show that I am offline, but I can ping Google DNS. Windows PC, iPhone and Android phone have no issue displaying the same web pages.How do I solve this issue?

Go step by step and test.
1. Power off the router. Unplug it from the wall. Wait a while.
    Plug it back to the wall. Power the router on. Wait until all the lights are lit properly. It will take a while.
    Restart the computer.
    Start up in Safe Mode.
    http://support.apple.com/kb/PH14204
2. Empty Caches
    Safari > Preference > Advanced
    Checkmark the box for "Show Develop menu in menu bar".
    Develop menu will appear in the Safari menu bar.
    Click Develop and select "Empty Caches" from the dropdown.
3. Deselect Proxies if selected.
    System Preference > Network > Advanced > Proxies Tab
    Under "Select Protocol", uncheck any box if selected.
    Click "OK" then "Apply”.

Multiple application pools for ColdFusion possible in the same IIS website?

I would like to set up a single website with CFM11 under IIS8.5
In this website there are several CFM applications, each under a different "Application" subfolder. For security purposes, monitoring and separate maintenance shutdowns per application, these would all need their own "application pool".
However, this means that these applications should run under a different application pool than their website root node. In IIS this causes a 403.18 exception:
HTTP Error 403.18 - Forbidden
The specified request cannot be processed in the application pool that is configured for this resource on the Web server.
Most likely causes:
•An ISAPI filter or custom module changed the URL to run in a different application pool than the original URL.
•An ISAPI extension (or custom module) used ExecuteURL (or ExecuteRequest) to run in a different application pool than the original URL.
•You have a custom error page that is located in one application pool but is referenced by a Web site in another application pool. When the URL is processed, it is determined by IIS that that it should have been processed in the first application pool, not the other pool.
•The Web site has multiple applications configured. The application this request is configured to run in is set to run in an application pool that does not exist.
All works fine if the "applications" in the subfolders run under the same application pool as the website root. However that is not my preferred setup... The behaviour is consistent over all CFM-applications that I deploy, no matter how simple they are...
Two questions:
- is coldfusion actually looking to "higher" folders than I expect it to? (and can that be avoided)
- any hints or experiences on how to avoid / solve this issue?

Here are the steps you need to follow:
When you create connector for your ColdFusion 11 website, you get the “Jakarta” as virtual directory added under your website in IIS. If you don't then add 'jakarta' as virtual directory in your website.
You need to right click on “Jakarta” folder and click on “Convert to Application”.
Select the new Application Pool of the Application (say Test) added under website (CF 11)
Click OK. Restart IIS.
NOTE : You need not to restart IIS as well however if you still face the issue after following the above steps then try to restart IIS.
HTH
Thanks
VJ

Window Server 2008-Issue running my website on local webserver-ie issue

I hosted my website on my local webserver (Window Server 2008), and when I run it on
iE8 & iE11 the website doesn't look good, my navigation bar brakes, and my image slider breaks too. It is not a browser
issue because, I have hosted the same website on the Goddady servers, and it works fine with
iE8&
iE11. And also on my local webserver when I try to run it on the google chrome it works fine, but on the Internet Explorer comes out with that problem. Do you guys think is a problem with my IIS on my Server? Any help/suggestion/advice I would
really appreciate it.
Thanks,
Samet

Might ask them over here.
http://forums.iis.net/
or for web development issues over here.
http://forums.asp.net/
Regards, Dave Patrick ....
Microsoft Certified Professional
Microsoft MVP [Windows]
Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.

Flash Builder 4 LDAP issue on IIS 7 with Coldfusion 8

I have a cfc that returns empty strings back into my project when I attempt an auto login through LDAP. The same files perform correctly on a different server with IIS 6. I set up a simple cfm on the IIS 7 server and received the appropriate data. I set up a cfm on the IIS 7 server to invoke the very same cfc that fails in the flash builder and received the appropriate data. Both servers are inside the company firewall.
The web folder is set up as an application with windows authentication enabled, disabling and enabling the anonymous authentication seems to have no impact on any of the scenarios. I am assuming I am missing some configuration in the ColdFusion Flex integration but I am not sure what it is. Anyone have a shot in the dark on this one?
Enable Flash Remoting support &
Enable Remote Adobe LiveCycle Data Management access are both checked
SSL connections are not being used.

I absolutly did read the guidance notes and it was based in them that we installed.
Quote:
"Now that we have had an opportunity to undertake further testing with the final release of Mac OS X 10.7, we are pleased to report that there are only minor usability issues when using Flash Builder 4.5.1 on Mac OS X 10.7 and, as such, we will be updating our previous statement to confirm compatibility of these releases"
What I am now experiencing on two different machines is what appears to be outside the scope of these notes and either a new issue that is reproducible, or a Java issue related to 10.7. Not being a Java guy I'm not sure were to begin short of trying Eclipse on its own.
I am able to produce a crash of FB 4.5.1 by just trying to close an MXML file by clicking the close button of the tab, or by closing a project. This is on two seperate machines now.

RH10 - Printed Documentation Issues.

Hi!
I'm new to RH10. I've started a new Technical Authoring role having taken 6 years out of the role... In my previous roles I've walked into the company and the styles and templeate were already set up and I just got on with the authoring part of the role. However, this time I'm starting from scratch, so am requiring some help.
I've used Robohelp in the past and decided this was the software to go along with. However, it's quite a bit different to how I remember it!
Currently I am using a trial of Robohelp 10. I have created a test project and managed to generate a Microsoft HTML Help file. I'm now trying to generate this into a printed document. Issues I'm having are:
Firstly I seem to have a line of text which is set as Conditional Build Tag of Online only showing in my printed document. There are other Onliine only bits that are not showing, but this particular line I just cannot seem to remove from the printed document. Any suggestions on how to deal with this? I have removed the conditional tag and re added it.
The company's brand is to use Tahoma font. However, I'm finding that when I print the document it comes out in grey, even though I've set the font colour to be automatic. I've even tried to swap this to being black, but I still seem to get grey print. Is this down to the font type I'm using or could there be an issue with the generation?
I've set my Heading 1 style to be centred for the title page and still it prints out left alligned. Am I missing something with the style?
Finally, each of my topics are coming out printed on a new page, even though I have not selected the 'Start each topic on new page' check box when setting up the generation options. Can you point me in the right direction to adjust this please.
I'm sure that mose of these are user error and probably down to my rusty authoring. But hoping that help on these will help me to move forward and loosen up the rustyness!!!
I look forward to hearing from you soon.

Online Conditional Build Tag: You may want to check what Conditional Build Tag expression is being used in the Printed Documentation single source layout? This controls the content that is included. However be aware that content in a topic (or a topic itself) can have more than one tag assigned to it. I think this will be a case of going back to the topics that have the online tag and doing some investigation. You can easily identify the topics with a CBT by right clicking on a tag in the Conditional Build Tag pod and selecting Properties.
This could be down to the Word styles you are using in the template and how they are mapped to the RH Styles. Check out the following link for an excellent tutorial on producing printed documentation. http://www.grainge.org/pages/authoring/printing/printing.htm
See point 2.
Again this is style related. It sounds like you have a Word style mapped with the pagination option selected. See point 2.

Cold fusion 9 Installation on Windows server 2008 (IIS 7.0) - IIS websites not working ?

I am having a 64 bit machine on which windows server 2008 R2 is installed. IIS 7.0 is configured and running on it. on which I have my organisations main website. I have to install Cold fusion on this machine as some of my site pages are designed with CF.
I used all the default settings for installing cold fusion 9. It got completed succefully. But after I restarted my system and tried accesing my ASP.net website it was not loading the page. Text getting displayed was only as follows '<script> src="'. Later I unsistalled CF and my site was working fine.
Please can any one guide me to successfully install Cold fusion without disturbing my main site deployed on IIS ?

Sarfarajms, I don't recognize what about the CF install would conflict with ASP.NET, but I'll note this:
If you downloaded CF 9 recently, you are still running 9.0--which does NOT formally support IIS 7. If you followed the steps about enabling IIS 6 compatibility and such (in the install guide or some blog entry), perhaps that caused the conflict.
Instead, you will want to install 9.0.1 (CF 9 Updater 1, which is NOT provided in the current 9.0 install). THAT is the first release to formally support IIS 7. And if you read the updater installation guide (http://www.adobe.com/support/documentation/en/coldfusion/901/cf901install.pdf), it discusses how to deal with the upgrade depending on what you had done with respect to IIS, starting at the bottom of its page 8.
Hope that helps.
/charlie

LR 4.4 Import Issues - Missed a Cure?

Hello Everyone,
Since upgrading to 4.4, I have experienced a number of new issues. 4.3 was solid as a rock in comparison. 4.4 is causing me to need to manually terminate and/or restart the application numerous times daily, sometimes numerous times hourly. It clearly needed more bake time.
I am posting this thread because, after reading numerous similar posts (I find I'm hardly alone) and hundreds of responses, it is not clear to me there are any solid solutions. If there are, and I missed them, I am hoping someone will simply point me toward the appropriate URL.
My primary issue surrounds Import.
The Import function has been repeatedly (not just once or twice, but interiminably):
Hanging, becoming unresponsive after telling it to execute the Import. This is frequently noticed immediately, at file #1.
Incredibly slow, eventually grinding to a halt after a handful of files.
Sources are dropped. Initially all sources are listed. Then, especially with sources (e.g. card reader, smartphone) having > 100 files, the source simply is removed from the listing. You can toggle the arrow on other sources (e.g. to expand file folders), but nothing happens other than the arrow toggling up/down.
Only solution, restart (frequently requiring manual process termination) and try again. I have seen discussions regarding smartphones. It was never an issue with 4.3. With 4.4, my iPhone 4S will populate the preview grid, but after about 2 minutes, it disappears and the grid goes blank.
Importing large number of files (regardless of source) will populate the grid but frequently have the exclamation mark with a number of the preview images. Only solution I've found, delete effected files from catalog, then reimport.
Modifying import settings, such as my copyright or related info, will terminate LR altogether, about 30% of the time. This happened to a number of us at a LR training class this past weekend (different machines, OSes).
Importing 764 JPG from my iPhone (while writing this) has been going about :30 and is 1/3 (indicated) complete. We're at the point of about 1 image imported ever ~5 seconds, reinforced by the entire grid object being refreshed each time. I would consider importing a handful of files at a time, but if I do much more than select the iPhone as source and hit Import as soon as the grid populates, the source is lost, and everything starts over.
One instance of an 'insufficient memory' error.
There are other niggling issues but Import is a major mess. From what I've read (and, again, I see I'm not alone), these issues are common for both Windows and Mac, newer PCs and older, and in all manner of mixed environments.
My own situation is a Windows 7 Ultimate, Dell E6400, 4GB RAM, LR 4.4. In all cases I am reading my cards via the built-in card readers. Primary cameras are a Canon SX260 (JPG only) and Konica Minolta Maxxum 7D shooting (almost always) RAW (.MRW). My content is solely pictures, no video.
With regard to the smartphone discussion, I have experienced these problems with the laptop docked, undocked, with or without smartphone attached.
The only relief I have found is, when working with a memory card having >100 images (not many, in the grand scheme), to copy files to a local hard drive, then import from there. The impression I have, is that the speed allows quicker execution, getting ahead of any resource contention issues. Purely a gut feel thing based on observed behavior. Nonetheless importing from HD rather than SD does work better.
Clearly 4.4's Import has issues. Any word of a service patch or 4.5?

Uninstall 4.4 and re-install 4.3 is the normal process for downgrading.
Others don't necessarily have the problems you're seeing, so to me it's less likely a fundamental flaw of LR 4.4 that wasn't tested well enough, and more likely a hardware or driver issues that LR 4.4 is bringing to light.
It may be that LR 4.4 is using different USB libraries or different OS-level functions to interact with the removable devices, perhaps to resolve other issues reported in previous versions, so something working differently wouldn't be unexpected. It is less expected that whatever LR 4.4 is doing would cause problems on a particular computer, though. It might be wise to figure out what is wrong on your system when LR 4.4 is in use, but obviously you also need to have a functioning workflow as well.
For experimentation, I think it is possible to have both LR 4.3 and LR 4.4 installed at the same time, if your rename the LR 4.4 program folder to something completely different before doing the install for LR 4.3, and then rename it back when you're done.
You also might want to try the beta for Lightroom 5 at Adobe Labs http://labs.adobe.com/ to see if it works any better and report any issues to the LR5-beta specific discussion forum (not here).

Is there a CDN Issue? Certain websites half loadin...

Hi,
A few weeks ago my trusty DG834G router decided to stop connecting to the internet (or even acknowledging I had an ADSL connection, very odd) so I've had to (reluctantly!) promote the BT homehub from access point to main router.
I'm fairly sure it's completely unrelated to my router switching but ever since doing so I've had sporadic issues connecting to certain sites. It's extremely frustating.
Half the sites will tend to load, but hang on loading various elements - stylesheets, javascript etc. This happens on multiple devices.
I believe I've tracked the issue down to CDNs (content-distribution-networks), specifically Akamai.
For example, when loading the BBC site my browser hangs loading assets from bbcimg.co.uk. When loading eBay it hangs loading assets from rtm.ebaystatic.com and from Facebook fbstatic-a.akamaihd.net.
Doing an nslookup against these servers show they all appear to be farmed out to Akamai.
(note, my router is correctly at 192.168.0.253)
C:\Users\Andrew>nslookup node1.bbcimg.co.uk
Server: BThomehub.home
Address: 192.168.0.253
Non-authoritative answer:
Name: a1092.g.akamai.net
Addresses: 213.120.157.72
213.120.157.18
Aliases: node1.bbcimg.co.uk
img.bbc.net.uk
node1.bbcimg.co.uk.edgesuite.net
C:\Users\Andrew>nslookup rtm.ebaystatic.com
Server: BThomehub.home
Address: 192.168.0.253
Non-authoritative answer:
Name: a1166.g.akamai.net
Addresses: 213.120.157.64
213.120.157.27
Aliases: rtm.ebaystatic.com
rtm.ebaystatic.georedirector.akadns.net
rtm.ebaystatic.com.edgesuite.net
C:\Users\Andrew>nslookup fbstatic-a.akamaihd.net
Server: BThomehub.home
Address: 192.168.0.253
Non-authoritative answer:
Name: a1168.dsw4.akamai.net
Addresses: 2a02:26f0:5d::173f:632a
2a02:26f0:5d::173f:6328
213.120.157.16
213.120.157.57
Aliases: fbstatic-a.akamaihd.net
fbstatic-a.akamaihd.net.edgesuite.net
I can't even appear to open a telnet connection to them which is why my browser has no chance:
C:\Users\Andrew>telnet a1092.g.akamai.net 80
Connecting To a1092.g.akamai.net...Could not open connection to the host, on port 80: Connect failed
and a tracert fails too:
Tracing route to a1092.g.akamai.net [213.120.157.72]
over a maximum of 30 hops:
1 <1 ms <1 ms <1 ms BThomehub.home [192.168.0.253]
2 27 ms 27 ms 27 ms 217.47.112.250
3 * * * Request timed out.
4 * * * Request timed out.
5 * * * Request timed out.
6 * * * Request timed out.
7 * * * Request timed out.
8 * * * Request timed out.
9 * * * Request timed out.
10 * * * Request timed out.
11 * * * Request timed out.
12 * * * Request timed out.
13 * * * Request timed out.
14 * * * Request timed out.
15 * * * Request timed out.
16
...and so forth
Running the same commands from a dedicated server sat in a datacentre works fine. I imagine this is also the case for other domestic ISPs.
Tracert from dedicated server:
C:\Users\Administrator>tracert a1092.g.akamai.net
Tracing route to a1092.g.akamai.net [23.63.99.224]
over a maximum of 30 hops:
1 3 ms <1 ms 1 ms 213-229-119-129.static.as29550.net [213.229.119.129]
2 <1 ms <1 ms <1 ms hex-b.3.magic.as29550.net [92.48.95.61]
3 1 ms 1 ms 1 ms ae1-cr0.the.as29550.net [91.186.5.249]
4 1 ms 1 ms 1 ms lonap.netarch.akamai.com [5.57.80.72]
5 1 ms 1 ms 1 ms a23-63-99-224.deploy.static.akamaitechnologies.com [23.63.99.224]
Trace complete.
Note that from my connection it resolves to 213.120.157.18 but from our servers it resolves to 23.63.99.224. I can telnet to 23.63.99.224 perfectly fine from my home connection.
I understand the point of a CDN is to split the load between servers so I may expect to see different IPs but 213.120.157.18 appears to be owned by BT. Are BT hosting their own CDN network which is killing my connection?
Please could this be escalated to someone in your networking department to investigate? I can only assume it's not just me having this issue and the issue appear to be fairly simple to fix.
Many thanks.

Hi
I'm having precisely the same problems, and have been for the last couple of weeks - everything works fine, except for CDN-hosted content.
The addresses I cannot connect to are the same as the ones in the original post - eg:
tracert node1.bbcimg.co.uk
Tracing route to a1092.g.akamai.net [213.120.157.72]
over a maximum of 30 hops:
1    <1 ms    <1 ms    <1 ms router [10.X.X.X]
2    42 ms    42 ms    41 ms 217.47.13.186
3     *        *        *     Request timed out.
Changing DNS server (to e.g.: 8.8.8.8) doesn't help - returns the same (unresponsive) IP addresses.
I'm aware of the BBC-related problems from a week or two ago, and my problems seem to have started at around the same time, but I get problems on various websites - anything that doesn't respond seems to be Akamai related.
It's not consistent either. Whilst writing this, the result I get from nslookup has now changed to 213.120.161.186 & 213.120.161.200, and suddenly I can see the BBC News website again.
At the same time, I can't access store.steampowered.com. nslookup on that gives a1507.d.akamai.net, 213.120.157.32 213.120.157.74 213.120.157.67
So - I seem to be getting two ranges back for Akamai CDN servers from DNS queries - sometimes I'm getting 213.120.157.X addresses, which seem to route into nowhere for me, and sometimes I'm getting 213.120.161.X addresses, which work fine.
For reference, my WAN IP is 86.137.32.X, gateway is 217.47.13.186.
Don't suppose there are any hugely knowledgable BT folks passing who can tell which CDN servers I should be seeing, and can say why I seem to be flip-flopping between one set I can see and one I can't?
Cheers

[solved] compiz-core upgrade issue: missing /usr/lib/compiz/libcore.so

After upgrading from compiz-core 0.8.8-3 to 0.8.8-4, but it's persisting even downgrading I got a segfault for the missing file.
Running
LANG=C xinit >xinit.log 2>xinit.log
with the following .xinitrc
if [ -d /etc/X11/xinit/xinitrc.d ]; then
for f in /etc/X11/xinit/xinitrc.d/*; do
[ -x "$f" ] && . "$f"
done
unset f
fi
setxkbmap it -option compose:rctrl -option terminate:ctrl_alt_bksp
urxvtd -f -o
fbpanel &
gtk-redshift &
compiz --debug --replace ccp --indirect-rendering
echo "ARGH -> $?"
I got this output in xinit.log
ARGH -> 139
rver 1.13.0
Release Date: 2012-09-05
X Protocol Version 11, Revision 0
Build Operating System: Linux 3.6.0-1-ARCH x86_64.
Current Operating System: Linux archmini 3.6.2-1-ARCH #1 SMP PREEMPT Fri Oct 12 23:58:58 CEST 2012#
Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=7342087f-b1bb-4133-8b50-d25ff902fcab#
Build Date: 05 October 2012 01:57:18PM
Current version of pixman: 0.26.2
>...Before reporting problems, check http://wiki.x.org
>...to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
>...(++) from command line, (!!) notice, (II) informational,
>...(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Mon Oct 15 22:20:21 2012
(==) Using config directory: "/etc/X11/xorg.conf.d"
Initializing built-in extension Generic Event Extension
Initializing built-in extension SHAPE
Initializing built-in extension MIT-SHM
Initializing built-in extension XInputExtension
Initializing built-in extension XTEST
Initializing built-in extension BIG-REQUESTS
Initializing built-in extension SYNC
Initializing built-in extension XKEYBOARD
Initializing built-in extension XC-MISC
Initializing built-in extension SECURITY
Initializing built-in extension XINERAMA
Initializing built-in extension XFIXES
Initializing built-in extension RENDER
Initializing built-in extension RANDR
Initializing built-in extension COMPOSITE
Initializing built-in extension DAMAGE
Initializing built-in extension MIT-SCREEN-SAVER
Initializing built-in extension DOUBLE-BUFFER
Initializing built-in extension RECORD
Initializing built-in extension DPMS
Initializing built-in extension X-Resource
Initializing built-in extension XVideo
Initializing built-in extension XVideo-MotionCompensation
Initializing built-in extension XFree86-VidModeExtension
Initializing built-in extension XFree86-DGA
Initializing built-in extension XFree86-DRI
Initializing built-in extension DRI2
Loading extension GLX
The XKEYBOARD keymap compiler (xkbcomp) reports:
> Warning: Type "ONE_LEVEL" has 1 levels, but <RALT> has 2 symbols
> Ignoring extra symbols
Errors from xkbcomp are not fatal to the X server
rxvt-unicode daemon listening on /home/milky/.urxvt/urxvtd-archmini.
compiz (core) - Debug: Could not stat() file /home/milky/.compiz/plugins/libcore.so : No such file#
compiz (core) - Debug: Could not stat() file /usr/lib/compiz/libcore.so : No such file or directory
/home/milky/.xinitrc: line 19: 858 Segmentation fault compiz --debug --replace ccp --indire#
xinit: connection to X server lost
^M
waiting for X server to shut down urxvt: X connection to ':0' broken, unable to recover, exiting.
Server terminated successfully (0). Closing log file.
Relevant pacman.log:
[2012-10-15 21:30] Running 'pacman -Syu'
[2012-10-15 21:30] synchronizing package lists
[2012-10-15 21:30] starting full system upgrade
[2012-10-15 21:40] upgraded acpid (2.0.17-1 -> 2.0.17-3)
[2012-10-15 21:40] upgraded cabal-install (1.16.0-1 -> 1.16.0-2)
[2012-10-15 21:40] upgraded chromium (22.0.1229.92-1 -> 22.0.1229.94-1)
[2012-10-15 21:40] upgraded libglapi (8.0.4-3 -> 9.0-1)
[2012-10-15 21:40] upgraded libgl (8.0.4-3 -> 9.0-1)
[2012-10-15 21:40] installed glu (9.0.0-1)
[2012-10-15 21:40] upgraded compiz-core (0.8.8-3 -> 0.8.8-4)
[2012-10-15 21:40] upgraded curl (7.27.0-1 -> 7.28.0-1)
[2012-10-15 21:40] upgraded dnsutils (9.9.1.P3-1 -> 9.9.2-1)
[2012-10-15 21:40] upgraded erlang (R15B01-1 -> R15B01-2)
[2012-10-15 21:40] upgraded firefox (15.0.1-1 -> 16.0.1-1)
[2012-10-15 21:40] upgraded firefox-i18n-it (15.0.1-1 -> 16.0.1-1)
[2012-10-15 21:40] upgraded freeglut (2.8.0-1 -> 2.8.0-2)
[2012-10-15 21:40] upgraded gegl (0.2.0-3 -> 0.2.0-4)
[2012-10-15 21:40] upgraded git (1.7.12.2-1 -> 1.7.12.3-1)
[2012-10-15 21:40] upgraded gnutls (3.1.2-1 -> 3.1.3-1)
[2012-10-15 21:40] upgraded gparted (0.13.1-1 -> 0.14.0-1)
[2012-10-15 21:40] upgraded hwids (20120922-1 -> 20121012-1)
[2012-10-15 21:40] upgraded intel-dri (8.0.4-3 -> 9.0-1)
[2012-10-15 21:40] upgraded jasper (1.900.1-7 -> 1.900.1-8)
[2012-10-15 21:40] upgraded khrplatform-devel (8.0.4-3 -> 9.0-1)
[2012-10-15 21:40] upgraded pam (1.1.5-4 -> 1.1.6-1)
[2012-10-15 21:40] upgraded util-linux (2.22-7 -> 2.22.1-1)
[2012-10-15 21:40] upgraded systemd (194-1 -> 194-3)
[2012-10-15 21:40] upgraded libgbm (8.0.4-3 -> 9.0-1)
[2012-10-15 21:40] upgraded libegl (8.0.4-3 -> 9.0-1)
[2012-10-15 21:40] upgraded libldap (2.4.32-1 -> 2.4.33-1)
[2012-10-15 21:40] >>> Updating module dependencies. Please wait ...
[2012-10-15 21:40] >>> Generating initial ramdisk, using mkinitcpio. Please wait...
[2012-10-15 21:40] ==> Building image from preset: 'default'
[2012-10-15 21:40] -> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux.img
[2012-10-15 21:40] ==> Starting build: 3.6.2-1-ARCH
[2012-10-15 21:40] -> Running build hook: [base]
[2012-10-15 21:40] -> Running build hook: [udev]
[2012-10-15 21:40] -> Running build hook: [autodetect]
[2012-10-15 21:40] -> Running build hook: [pata]
[2012-10-15 21:40] -> Running build hook: [scsi]
[2012-10-15 21:40] -> Running build hook: [sata]
[2012-10-15 21:40] -> Running build hook: [filesystems]
[2012-10-15 21:40] -> Running build hook: [usbinput]
[2012-10-15 21:40] -> Running build hook: [fsck]
[2012-10-15 21:40] ==> Generating module dependencies
[2012-10-15 21:40] ==> Creating gzip initcpio image: /boot/initramfs-linux.img
[2012-10-15 21:40] ==> Image generation successful
[2012-10-15 21:40] ==> Building image from preset: 'fallback'
[2012-10-15 21:40] -> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux-fallback.img -S autodetect
[2012-10-15 21:40] ==> Starting build: 3.6.2-1-ARCH
[2012-10-15 21:40] -> Running build hook: [base]
[2012-10-15 21:40] -> Running build hook: [udev]
[2012-10-15 21:40] -> Running build hook: [pata]
[2012-10-15 21:40] -> Running build hook: [scsi]
[2012-10-15 21:40] -> Running build hook: [sata]
[2012-10-15 21:40] -> Running build hook: [filesystems]
[2012-10-15 21:40] -> Running build hook: [usbinput]
[2012-10-15 21:40] -> Running build hook: [fsck]
[2012-10-15 21:40] ==> Generating module dependencies
[2012-10-15 21:40] ==> Creating gzip initcpio image: /boot/initramfs-linux-fallback.img
[2012-10-15 21:40] ==> Image generation successful
[2012-10-15 21:40] upgraded linux (3.5.6-1 -> 3.6.2-1)
[2012-10-15 21:40] upgraded linux-headers (3.5.6-1 -> 3.6.2-1)
[2012-10-15 21:40] upgraded lirc-utils (1:0.9.0-30 -> 1:0.9.0-31)
[2012-10-15 21:40] upgraded mesa (8.0.4-3 -> 9.0-1)
[2012-10-15 21:40] upgraded mtdev (1.1.2-1 -> 1.1.3-1)
[2012-10-15 21:40] upgraded nodejs (0.8.11-1 -> 0.8.12-1)
[2012-10-15 21:40] upgraded subversion (1.7.6-1 -> 1.7.7-1)
[2012-10-15 21:40] upgraded sysvinit-tools (2.88-8 -> 2.88-9)
[2012-10-15 21:40] upgraded systemd-sysvcompat (194-1 -> 194-3)
[2012-10-15 21:40] upgraded thunderbird (15.0.1-1 -> 16.0.1-1)
[2012-10-15 21:40] upgraded tmux (1.6-2 -> 1.7-1)
[2012-10-15 21:40] upgraded wpa_supplicant (1.0-1 -> 1.0-2)
[2012-10-15 21:40] upgraded xf86-input-evdev (2.7.3-1 -> 2.7.3-2)
[2012-10-15 21:40] upgraded xf86-video-intel (2.20.9-1 -> 2.20.9-2)
[2012-10-15 21:40] upgraded xorg-server-common (1.12.4-1 -> 1.13.0-2)
[2012-10-15 21:40] upgraded xorg-server (1.12.4-1 -> 1.13.0-2)
[2012-10-15 21:40] upgraded youtube-dl (2012.09.27-1 -> 2012.10.09-1)
Anyone can help me tracing in which package the missing file is located (if it's not in compiz-core)?
Last edited by dexgeh (2012-10-16 17:58:39)

I managed to solve the issue commenting the --indirect-rendering flag and installing and launching driconf to create a default ~/.drirc file.
I just noticed that in the same upgrade I got intel-dri from 8.x to 9.x version, maybe it's related.
Launching a terminal in .xinitrc and manually launching
LIBGL_DEBUG=verbose compiz --debug --replace ccp
show me a lot of errors, but it's working, and I don't need anymore the --indirect-rendering flag (in the past I put that flag in the command because of the bad performance that compiz had without).

Issue with viewing website in internet explorer

Hello. I created a website in dreamweaver using rollover images for the links. When I load the webpage in the firefox, google, or opera browsers it loads fine, however when I load it in internet explorer I get an "allow activex" message. When I tried to view it on my tablet in google it loaded fine, but when I tried to load it in my tablet using internet explorer it didn't show any links at all and than it crashed the browser. What can cause this and how can I fix it? is there a better way to create rollover images that I'm not aware of? I tried to use CSS code in the stylesheet to make rollover images, but couldn't figure out how to do that.
Thanks,
Mike Irvan

Any server you have access to would work fine, you just upload to a temporary folder, like TEST, then delete it after the problem is found.
However, if you're not online yet, and having issue with IE, it's very likely you just need to drop IE's security settings to allow it to display local file attachments correctly (yeah, don't ask, it's a Microsoft thing).
Go into IE and choose Tools > Internet Options > Security and drop the scrubber bar down a notch or two, restart and try again.
When the site is uploaded to an actual server, that error won't come up because all files are coming from the same remote source (Microsoft, it doesn't have to make sense®)
You can do a search online to get more info on customizing the settings manually, somehting like this page will come up if you search allow blocked local files: IE 10 is blocking javascript on local html files - Microsoft Community

Issues with BBC website video + Audio

I've been having issues using the video and audio content on the BBC website for a few months, it's started to get really annoying so I thought I would ask and see if anyone has a solution.
First I have uninstalled and reinstalled Flash, repaired permissions, updated Safari, Firefox, Chrome, repaired permissions, deleted prefs, basically done everything from a system point that I can think of.
I'm still having a problem of the video and audio locking up the browser and taking AGES to actually display. I've done a video for it to show what I mean:
http://www.youtube.com/watch?v=CzFw3qqKADc&hd=1
The first part where I view the video story is actually not 'too' bad, still on the slow side but that's rare, keep watching and you'll see how slow it is!
It's very annoying because not only does it take ages to load, the browser just totally locks up, so there's not much chance of doing anything else, it's just slows right down. This actually happens in any browser I try. (I think in the video it was Firefox but that's just because of what I was using at the time, same goes for Safari)
I created a new user account and it's actually fine in that so there must be a conflict somewhere in my system, I'm just not sure how to resolve it.
Any solutions or thoughts?

It seems to take too long to buffer. How much free space do you have on your hard drive?
Do you have any third-party add-ons or enhancers installed?
As for general browser slowness:
If Safari is getting very slow:
Adding Open DNS codes to your Network Preferences, should give good results in terms of speed-up as well as added security:
If you are using a single computer: Open System Preferences/Network. Double click on your connection type, or select it in the drop-down menu, and in the box marked 'DNS Servers' add the following two numbers:
208.67.222.222
208.67.220.220
(You can also enter them if you click on Advanced and then DNS)
Sometimes reversing the order of the DNS numbers can be beneficial in cases where there is a long delay before web pages start to load, and then suddenly load at normal speed:
http://support.apple.com/kb/TS2296
If your computer is part of a network: please refer to this page: http://www.opendns.com/start/bestpractices/#yournetwork and follow the advice given.
You could also try these codes as well: 4.2.2.1 & 4.2.2.2
If you use a Router, make sure it has the latest firmware installed.
One reason for a slowness in page loading may be the 'DNS Pre-fetching' feature of Safari 5.x
This is described here:
http://support.apple.com/kb/TS3408?viewlocale=en_US
If Safari seems to hang for ages:
If you have a lot of tabs open and/or a lot of pages running Flash, Safari can sometimes 'hang', requiring a restart of Safari. This can often be inconvenient, and as it is rarely Safari itself that is hanging but merely one of its plug-ins, usually Flash, there is a way using Terminal to restart the plug-ins (without restarting Safari and losing your tabs) by quitting the WebPluginHost process:
Open the Terminal from the Utilities folder in /Applications and type
killall -9 WebKitPluginHost
Note that this command kills all Safari plug-ins, not just Flash. All plug-ins should start back up when you reload the page.
Then go back to Safari and refresh any pages that were using the Flash plug-in. This also fixes the Beachball of Death. Try this whenever Safari gets slow or freezes. The latest versions of Flash 10.1 appear to have improved the situation somewhat, but haven't completed eliminated it.

Issues with this website

Is this a Safari issue or a Dice issue, or both?
http://community.dice.com/t5/Customer-Support/Using-Safari-with-this-website/td- p/191198
My post
The font size is WAY WAY too small, and I have had some other issues as well. One of which is when I close the browser window and come back to a thread and hit the reply button, I am taken to some search screen, and have to completely log out and log back in before I can reply. Its very annoying and needs to be done everytime I reply to a post. I have deleted all my cookies, cleared my cache, etc.. I am thinking its a issue with how this website talks with safari but I could be wrong. I could ISOLATE the problem by creating or logging into another Mac account I setup for testing problems, but I am too lazy to do so, as I am thinking this is a Dice + Safari issue because I never had the problems when I used FireFox full time.
John

I bet a donut that the problems I am experiencing have nothing to do with logging in as a admin. I bet its a Dice + Safari issue.

X60T Driver issues/missing

Hi, I thought I'd better join up as I've scanned through many similar issues on the site & none seem the same as my or have any useful tips.
A couple of weeks ago my HDD destroyed itself so I had to install WinXP from scratch
I also have SP2 & 3 installed.
I Dloaded all of the drivers I thought I would need from Lenovo Driver Support page & installed them
So, my Standby doesn't work & neither does the Audio (I get system sounds but no actual Audio). I have tried to install the WiFi Net driver & that doesn't appear to work either
Also in Device Manager it's saying I have 6 drivers missing which are - Network Controller, PCI Device, Unknown Device, Video Controller & Video Controller (VGA) - how many drivers do these **bleep** things require???
Video controller is installed already
Device Manager looks like this-
[IMG]http://i298.photobucket.com/albums/mm246/THE_MAD_RKH/20130315_124626_zps68d7a969.jpg[/IMG]
[IMG]http://i298.photobucket.com/albums/mm246/THE_MAD_RKH/20130315_124712_zpse3cc171f.jpg[/IMG]
Any help much appreciated, Thanks

Sorry you're having problems with this.
SP3 isn't just for Office. MS Windows Update should give you a download update for SP3. Don't do the standalone update as that's for developers. Windows Update should give you a smaller version to install. I don't think TVSU will run without it.
Use IE8
Dave
T430u, x301, x200T, x61T, x61, x32, x41T, x40, U160, ThinkPad Tablet 1838-22R, Z500 touch, Yoga Tab 2 Windows 8.1, Yoga Tablet 3 Pro
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
If someone helped you today, pay it forward. Help Someone Else!
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество

Documentation Issue? Missing IIS Websites

Similar Messages

Maybe you are looking for