Documentation of using XSLT-Mappings

Hi,
does anybody know where I can find a documentation of a mapping with xslt??
Thanks for your help.
Regards
Stefan

Hi Stefan,
          Everything has been said, but i though i would suggest an example for xslt mapping in sap xi,
Please refer "Generic XSLT Mapping for SAP XI,part 1 and 2" of the pdf.
https://sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/xi/xi-code-samples/generic xslt mapping in sap xi, part i.pdf
Also, you can refer an example in this weblog,
/people/anish.abraham2/blog/2005/12/22/file-to-multiple-idocs-xslt-mapping
Just thought of sharing these things,
Regards,
Anirban.

Similar Messages

  • Generating multiple target xmls from one source xml using xslt mappings

    Hi,
    I need to create more than one xml file from one source xml file using xslt mappings in file to file scenario.
    Can you please let me know how this can be achieved.
    Thanks,
    Rajesh

    Rajesh,
    If you must use the XSL Transformation then you can find a nice simple example here.  It's based on the Xalan XSLT Processor which to my knowledge is incorporated in PI7.1.  I've not actually tried this but it makes for an interesting mapping case so please let us know the results: 
    [XSLT Split for multiple XML file output|http://abbeyworkshop.com/howto/xslt/xslt_split/index.html]
    The XSL file will require a namespace addition:
    <xsl:stylesheet xmlns:xsl="http://www.w3.org/1999/XSL/Transform" xmlns:redirect="http://xml.apache.org/xalan/redirect" extension-element-prefixes="redirect" version="1.0">
    The redirect prefix is used for the write tags in the XSL file.
    The details cover the transformation of the source file:
    1:<student_list>
       2:    <student id="1">
       3:        <name>George Washington</name>
       4:        <major>Politics</major>
       5:        <phone>312-123-4567</phone>
       6:        <email>gw_at_example.edu</email>
       7:    </student>
       8:    <student id="2">
       9:        <name>Janet Jones</name>
      10:        <major>Undeclared</major>
      11:        <phone>311-122-2233</phone>
      12:        <email>janetj_at_example.edu</email>
      13:    </student>
      14:    <student id="3">
      15:        <name>Joe Taylor</name>
      16:        <major>Engineering</major>
      17:        <phone>211-111-2333</phone>
      18:        <email>joe_at_example.edu</email>
      19:    </student>
      20:</student_list>
    Using this transformation:
    2:<xsl:stylesheet xmlns:xsl="http://www.w3.org/1999/XSL/Transform"
    3:    xmlns:redirect="http://xml.apache.org/xalan/redirect"
    4:    extension-element-prefixes="redirect"
    5:    version="1.0"
    6:>
    7:<xsl:output method="xml"/>
    8:
    9:<xsl:template match="/">
    10:    <xsl:apply-templates />
    11:</xsl:template>
    12:
    13:<xsl:template match="student_list">
    14:    <xsl:apply-templates />
    15:</xsl:template>
    16:
    17:<xsl:template match="student">
    18:    <xsl:variable name="filename" select="concat(@id,'.xml')" />
    19:    <redirect:write select="$filename">
    20:        <student id="{@id}">
    21:            <xsl:apply-templates />
    22:        </student>
    23:    </redirect:write>
    24:</xsl:template>
    25:
    26:<xsl:template match="name | major | phone | email">
    27:    <xsl:copy-of select="." />
    28:</xsl:template>
    29:
    30:</xsl:stylesheet>

  • Code Sample: Easy RFC Lookup From XSLT Mappings Using a Java Helper Class

    Hi everyone,
    This is just a shameless plug for my article: <a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/05a3d62e-0a01-0010-14bc-adc8efd4ee14">Easy RFC Lookup From XSLT Mappings Using a Java Helper Class</a>. I hope you're interested in reading it, and I welcome your comments in this thread.
    Kind regards,
    Thorsten

    Hi Stefan. Thanks for your post. I have already done that. It still does not work. As a base for my java helper class I have usesd Thorstens code.
    The problem is quite confusing. I will try to ouline both issues here.
    First of all, when try to test from within the Operation Mapping, I always get a java error saying it cannot find the communication channel (it is there and working because I have tested it with the RFCLookup in graphical mapping). I have found a way to work around this, and that is to uncheck the "Use SAP XMLToolkit" checkbox --> switch to test tab, enter my ReceiverService in the parameter tab (header parameter) --> switch back to Definition tab, check the "Use SAP XMLToolkit" checkbox --> switch to Test tab and run the test. Then the XSLT and call to java helper class will work. Of course this is not really something you want to do all the time. Maybe there is a bug.
    Secondly, it never works when I try to do it "live". I am using a file adapter to pick up one file, convert it and a file adapter to drop the converted file. I get the following error code in SXMB_MONI.
    <?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
    <!--  Request Message Mapping   -->
    <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
      <SAP:Category>Application</SAP:Category>
      <SAP:Code area="MAPPING">TRANSFORMER_CONF_EX</SAP:Code>
      <SAP:P1>ATJ_Accounting2XML_Accounting.xsl</SAP:P1>
      <SAP:P2>http://rd.accounting.logica.com</SAP:P2>
      <SAP:P3>fd552c30-bad9-11dd-9761-c21dac1b818c</SAP:P3>
      <SAP:P4>-1</SAP:P4>
      <SAP:AdditionalText />
      <SAP:Stack>TransformerConfigurationException triggered while loading XSLT mapping ATJ_Accounting2XML_Accounting.xsl; http://rd.accounting.logica.comfd552c30-bad9-11dd-9761-c21dac1b818c-1</SAP:Stack>
      <SAP:Retry>M</SAP:Retry>
      </SAP:Error>
    Using an XSLT without a call to a java helper class, works just fine.
    I am totally at a loss here. Any more input would be much appreciated.
    /Patrik

  • XML to Internal table using XSLT by CALL TRANSFORMATION error

    Dear experts,
    I have to fetch the data from an XML file using XSLT into internal tables. The XML file is very big as following:-
    <?xml version="1.0" standalone="yes" ?>
    - <Shipment>
      <shipmentID>25091203S000778</shipmentID>
      <manifestDateTime>2009-12-03T20:16:52.00</manifestDateTime>
      <shipmentFacilityNumber>025</shipmentFacilityNumber>
      <shipmentFacilityAbbreviation>CHI</shipmentFacilityAbbreviation>
      <shipmentFacilityAddress1>810 KIMBERLY DRIVE</shipmentFacilityAddress1>
      <shipmentFacilityAddress2 />
      <shipmentFacilityCity>CAROL STREAM</shipmentFacilityCity>
      <shipmentFacilityState>IL</shipmentFacilityState>
      <shipmentFacilityPostalCode>601880000</shipmentFacilityPostalCode>
      <shipmentTruckCarrierCode>X150</shipmentTruckCarrierCode>
      <shipmentSourceCode>T</shipmentSourceCode>
      <userID>CAMPOSG</userID>
    - <Delivery>
      <primaryCustomerNumber>954371</primaryCustomerNumber>
      <primaryCustomerName>MIDWEST OFFICE SUPPLY</primaryCustomerName>
      <primaryCustomerAddress1 />
      <primaryCustomerAddress2>4765 INDUSTRIAL DR</primaryCustomerAddress2>
      <primaryCustomerCity>SPRINGFIELD</primaryCustomerCity>
      <primaryCustomerState>IL</primaryCustomerState>
      <primaryCustomerPostalCode>627030000</primaryCustomerPostalCode>
      <primaryCustomerPhoneNumber>2177535555</primaryCustomerPhoneNumber>
      <shuttleStopFacilityNumber />
      <billOfLadingNumber>25HZK99</billOfLadingNumber>
      <carrierProNumber />
      <shipmentTotalCartonCount>6</shipmentTotalCartonCount>
      <shipmentTotalWeight>266</shipmentTotalWeight>
    - <order>
      <orderNumber>25HZK99</orderNumber>
      <subOrderNumber />
      <dateProcessed>2009-12-03</dateProcessed>
      <primaryOrderNumber />
      <shipTruckCode>X150</shipTruckCode>
      <shipTruckDescription>UDS - ADDISON</shipTruckDescription>
      <shipTruckPriorityCode>01</shipTruckPriorityCode>
      <shipTruckGroupCode>01</shipTruckGroupCode>
      <shipTruckDepartureTime>20.00.00</shipTruckDepartureTime>
      <shipTruckDockID>07</shipTruckDockID>
      <ldpFacilityAbbreviation />
      <shuttleAvailableIndicator>N</shuttleAvailableIndicator>
      <shuttleMessageText />
      <crossDockFacilityCode />
      <crossDockTruckCode />
      <crossDockID />
      <subsidizedFreightTruckID />
      <customerPurchaseOrderNumber>623559</customerPurchaseOrderNumber>
      <headerTypeCode>P</headerTypeCode>
      <orderTypeID>RG</orderTypeID>
      <deliveryTypeID>DS</deliveryTypeID>
      <deliveryMethodCode />
      <customerBarCode />
      <customerReferenceData>25HZK99</customerReferenceData>
      <customerReferenceText />
      <customerRouteData>ZNED UNTED</customerRouteData>
      <customerRouteText>ROUTE</customerRouteText>
      <endConsumerPurchaseOrderNumber />
      <endConsumerPurchaseOrderText />
      <endConsumerName>CHARLESTON TRANS. FACILITY</endConsumerName>
      <endConsumerAddress1>HOMEWOOD DT PROGRAM DEPT. 3</endConsumerAddress1>
      <endConsumerAddress2>17341 PALMER BLVD.</endConsumerAddress2>
      <endConsumerAddress3 />
      <endConsumerCity>HOMEWOOD</endConsumerCity>
      <endConsumerState>IL</endConsumerState>
      <endConsumerPostalCode>60430</endConsumerPostalCode>
      <endConsumerCountryCode />
      <fillFacilityNumber>025</fillFacilityNumber>
      <shpFacilityNumber>025</shpFacilityNumber>
      <homeFacilityAbbrCode>STL</homeFacilityAbbrCode>
      <homeFacilityNumber>015</homeFacilityNumber>
      <multiCartonIndicator>Y</multiCartonIndicator>
      <primaryCustomerIndicator>Y</primaryCustomerIndicator>
      <shipToCustomerNumber>954371001</shipToCustomerNumber>
      <customerCompanyID>01</customerCompanyID>
      <customerTruckID>U888</customerTruckID>
      <customerTruckDescription>UDS - ADDISON</customerTruckDescription>
      <customerTruckDockID>13</customerTruckDockID>
      <thirdPartyBillCarrier />
      <thirdPartyBillID />
      <thirdPartyBillType />
      <qualityCheckIndicator>N</qualityCheckIndicator>
      <warehouseLaydownID />
      <packListPosition>I</packListPosition>
      <preferredPackingType>CTN</preferredPackingType>
      <preferredPackingMaterial>PAPER</preferredPackingMaterial>
      <preferedPackingInstructions />
      <totalOrderCartonQty>6</totalOrderCartonQty>
      <convertAddressIndicator>N</convertAddressIndicator>
      <dealerInstructionIndicator>Y</dealerInstructionIndicator>
      <dealerinstructions1>CPO#: 623559</dealerinstructions1>
      <dealerinstructions2>ATTN: DANA GRIFFIN</dealerinstructions2>
      <dealerinstructions3>INFO: 612</dealerinstructions3>
      <dealerinstructions4>ROUTE: ZNED UNTED</dealerinstructions4>
      <dealerinstructions5 />
      <dealerinstructions6 />
      <shippingInstructionsIndicator>N</shippingInstructionsIndicator>
      <shippingInstructions1 />
      <shippingInstructions2 />
      <shippingInstructions3 />
      <shippingInstructions4 />
      <shippingInstructions5 />
      <shippingInstructions6 />
      <specialInstructionsIndicator>N</specialInstructionsIndicator>
      <specialInstructions1 />
      <specialInstructions2 />
      <customeContainerDesc />
    - <carton>
      <deliveryCartonID>253370905995</deliveryCartonID>
      <shipIndicator>Y</shipIndicator>
      <deliveryPalletID>X150</deliveryPalletID>
      <consolidatedDeliveryCartonID />
      <scanDateTime>2009-12-03T19:36:12.00</scanDateTime>
      <cartonWeight>52</cartonWeight>
      <dropShipFlag>1</dropShipFlag>
      <carrierTrackingNumber />
      <carrierZoneID>0</carrierZoneID>
      <codAmount />
      <customerPackageAmount />
      <declaredValue />
      <residentialDeliveryIndicator />
      <serviceTypeCode>00</serviceTypeCode>
      <ssccCode>006860244400829393</ssccCode>
    - <Item>
      <shipPrefix>UNV</shipPrefix>
      <shipStockNumber>21200</shipStockNumber>
      <itemDescription>PAPER XERO/DUP WE LTR 20#</itemDescription>
      <orderQuantity>1</orderQuantity>
      <originalShipQuantity>1</originalShipQuantity>
      <shipQuantity>1</shipQuantity>
      <inventoryUnitCode>CT</inventoryUnitCode>
      <inventoryWeightQuantity>52.000</inventoryWeightQuantity>
      <upcNumber>00000000000000</upcNumber>
      <upcRetailCode>087547212004</upcRetailCode>
      <hazmatIndicator>N</hazmatIndicator>
      <serialRequiredIndicator>N</serialRequiredIndicator>
      <dealerMemoPO>S</dealerMemoPO>
      <cartonLineNumber>1</cartonLineNumber>
      <orderLineNumber>11</orderLineNumber>
      <originalOrderPrefix>UNV</originalOrderPrefix>
      <originalOrderStockNumber>21200</originalOrderStockNumber>
      <reasonCode />
    - <Item_Serial>
      <serialNumber />
      </Item_Serial>
        </Item>
      </carton>
       </order>
      </Delivery>
      </Shipment>
    This is not the complete XML file as it exceeds the 15000 characters and then I cann't post here. So I have deleted much part of it.
    The hierarchy is as following: Shipment->Delivery->Order->Carton->Item.
    I have created a XSLT for it which is working fine.
    But when I execute my report program it gives CX_SY_XSLT_FORMAT_ERROR saying that
    Transformation error:  Non-canonical structure of element name XML_OUTPUT.

    Dear experts,
    My report program is as following:-
    *& Report  Z_ASNTRNS
    REPORT  Z_ASNTRNS.
    *& Report  Z_ASNTRNS
    TYPE-POOLS: abap, ixml.
    TABLES: ZASN_SHIPMENT,ZASN_DELIVERY,ZASN_ORDER,ZASN_CARTON,ZASN_ITEM.
    *CONSTANTS gs_file TYPE string VALUE 'C:Documents and SettingsC5134126DesktopRajesh_kandakatlaSampleASNFile.xml'.
    This is the structure for the data from the XML file
    TYPES: BEGIN OF ts_item,
          ZSHIPMENT LIKE ZASN_ITEM-ZSHIPMENT,
          VBELN LIKE ZASN_ITEM-VBELN,
          ORDER_NUMBER LIKE ZASN_ITEM-ORDER_NUMBER,
          CARTON_ID LIKE ZASN_ITEM-CARTON_ID,
           ITEM LIKE ZASN_ITEM-ITEM,
           CARTON_LINE_NUM LIKE ZASN_ITEM-CARTON_LINE_NUM,
           CARTON_LINE_NUMBER LIKE ZASN_ITEM-CARTON_LINE_NUM,
          AEDAT(8),
          AEZET(6),
           ITEM_DESCRIPTION LIKE ZASN_ITEM-ITEM_DESCRIPTION,
           ORD_QTY(16),
           ORIGINAL_SHIP(16),
           SHIP_QTY(16),
           UPC_NUMBER LIKE ZASN_ITEM-UPC_NUMBER,
           DEALER_MEMO_PO(5),
           ORDER_LINE_NUM LIKE ZASN_ITEM-ORDER_LINE_NUM,
          STATUS LIKE ZASN_ITEM-STATUS,
           END OF ts_item.
    TYPES: BEGIN OF ts_carton,
          ZSHIPMENT LIKE ZASN_CARTON-ZSHIPMENT,
          VBELN LIKE ZASN_CARTON-VBELN,
          ORDER_NUMBER LIKE ZASN_CARTON-ORDER_NUMBER,
           CARTON_ID LIKE ZASN_CARTON-CARTON_ID,
          AEDAT(8),
          AEZET(6),
           SHIP_INDICATOR LIKE ZASN_CARTON-SHIP_INDICATOR,
           TRACKING_NUMBER LIKE ZASN_CARTON-TRACKING_NUMBER,
           ZZCARTON_WGT(18),
           Item type ts_item,
           END OF ts_carton.
    TYPES: BEGIN OF ts_order,
          ZSHIPMENT LIKE ZASN_ORDER-ZSHIPMENT,
          VBELN LIKE ZASN_ORDER-VBELN,
           ORDER_NUMBER LIKE ZASN_ORDER-ORDER_NUMBER,
          AEDAT(8),
          AEZET(6),
           SUB_ORDER LIKE ZASN_ORDER-SUB_ORDER,
           ORDER_DATE(8),
           PRIMARY_ORDER LIKE ZASN_ORDER-PRIMARY_ORDER,
           CUSTOMER_PO LIKE ZASN_ORDER-CUSTOMER_PO,
           PRIMARY_ID LIKE ZASN_ORDER-PRIMARY_ID,
           SHIP_TO LIKE ZASN_ORDER-SHIP_TO,
          ANZPK(5),
           carton type ts_carton,
           END OF ts_order.
    TYPES: BEGIN OF ts_delivery,
          ZSHIPMENT LIKE ZASN_DELIVERY-ZSHIPMENT,
          VBELN LIKE ZASN_DELIVERY-VBELN,
          AEDAT(8) TYPE C,
          AEZET(6) TYPE C,
           PRIMARY_CUSTOMER LIKE ZASN_DELIVERY-PRIMARY_CUSTOMER,
           BILL_OF_LADING LIKE ZASN_DELIVERY-BILL_OF_LADING,
           CARTON_COUNT(5),
           TOTAL_WEIGHT(18),
           order type ts_order,
           END OF ts_delivery.
    TYPES: BEGIN OF ts_shipment,
           ZSHIPMENT LIKE ZASN_SHIPMENT-ZSHIPMENT,
           MANIFEST_DATE_TIME(25),
          AEDAT(8) TYPE C,
          AEZET(6) TYPE C,
          SDATE(8) TYPE C,
          STIME(6) TYPE C,
           SFACILITY_NUMBER LIKE ZASN_SHIPMENT-SFACILITY_NUMBER,
           ZZCARRIERCODE LIKE ZASN_SHIPMENT-ZZCARRIERCODE,
           Delivery type ts_delivery,
           END OF ts_shipment.
    TYPES: BEGIN OF ts_shipment1,
           ZSHIPMENT LIKE ZASN_SHIPMENT-ZSHIPMENT,
           MANIFEST_DATE_TIME(25),
           SFACILITY_NUMBER LIKE ZASN_SHIPMENT-SFACILITY_NUMBER,
           ZZCARRIERCODE LIKE ZASN_SHIPMENT-ZZCARRIERCODE,
           PRIMARY_CUSTOMER LIKE ZASN_DELIVERY-PRIMARY_CUSTOMER,
           BILL_OF_LADING LIKE ZASN_DELIVERY-BILL_OF_LADING,
           CARTON_COUNT(5),
           TOTAL_WEIGHT(18),
           ORDER_NUMBER LIKE ZASN_ORDER-ORDER_NUMBER,
           SUB_ORDER LIKE ZASN_ORDER-SUB_ORDER,
           ORDER_DATE(8),
           PRIMARY_ORDER LIKE ZASN_ORDER-PRIMARY_ORDER,
           CUSTOMER_PO LIKE ZASN_ORDER-CUSTOMER_PO,
           PRIMARY_ID LIKE ZASN_ORDER-PRIMARY_ID,
           SHIP_TO LIKE ZASN_ORDER-SHIP_TO,
           CARTON_ID LIKE ZASN_CARTON-CARTON_ID,
           SHIP_INDICATOR LIKE ZASN_CARTON-SHIP_INDICATOR,
           TRACKING_NUMBER LIKE ZASN_CARTON-TRACKING_NUMBER,
           ZZCARTON_WGT(18),
           ITEM LIKE ZASN_ITEM-ITEM,
           CARTON_LINE_NUM LIKE ZASN_ITEM-CARTON_LINE_NUM,
           CARTON_LINE_NUMBER LIKE ZASN_ITEM-CARTON_LINE_NUM,
           ITEM_DESCRIPTION LIKE ZASN_ITEM-ITEM_DESCRIPTION,
           ORD_QTY(16),
           ORIGINAL_SHIP(16),
           SHIP_QTY(16),
           UPC_NUMBER LIKE ZASN_ITEM-UPC_NUMBER,
           DEALER_MEMO_PO(5),
           ORDER_LINE_NUM LIKE ZASN_ITEM-ORDER_LINE_NUM,
           END OF ts_shipment1.
    TYPES: BEGIN OF t_xml_line,
                 data(256) TYPE x,
               END OF t_xml_line.
    *Typdefinition für Airplus
    *READ THE DOCUMENTATION "LASG_XML_INVOICE_BTM"!!!
    VARs beginning with "a_" are ATTRIBUTES
    DATA: l_ixml            TYPE REF TO if_ixml,
          l_streamfactory   TYPE REF TO if_ixml_stream_factory,
          l_parser          TYPE REF TO if_ixml_parser,
          l_istream         TYPE REF TO if_ixml_istream,
          l_ostream         TYPE REF TO if_ixml_ostream,
          l_document        TYPE REF TO if_ixml_document,
          l_node            TYPE REF TO if_ixml_node,
          l_xml TYPE REF TO cl_xml_document,
          l_xmldata         TYPE string.
    DATA: l_xml_table       TYPE TABLE OF t_xml_line,
             l_xml_line        TYPE t_xml_line,
             l_xml_table_size  TYPE i.
    DATA: l_filename        TYPE string.
    DATA: xml_out TYPE string ,
          size type i.
    DATA: l_xml_x1   TYPE xstring.
    DATA: l_len      TYPE i,
              l_len2     TYPE i,
              l_tab      TYPE tsfixml,
              l_content  TYPE string,
              l_str1     TYPE string,
              c_conv     TYPE REF TO cl_abap_conv_in_ce.
             l_itab     TYPE TABLE OF string.
    DATA: BEGIN OF l_itab occurs 0,
          data(256) type c,
          end of l_itab.
    TYPES : BEGIN OF TY_TEXT,
              data(255) type C,
            END OF TY_TEXT.
    DATA: F_XML TYPE STRING.
    DATA : LT_TEXT_OUT type table of TY_TEXT with header line.
    tables
    DATA: it_shipment    TYPE STANDARD TABLE OF ts_shipment,
          wa_shipment    TYPE  ts_shipment.
    *Errorvariables
    DATA: xslt_err   TYPE REF TO cx_xslt_exception,
          err_string TYPE string.
    PARAMETERS: pa_file TYPE localfile OBLIGATORY
    DEFAULT 'C:Documents and SettingsC5134126DesktopRajesh_kandakatlaSampleASNFile.xml'.
    START-OF-SELECTION.
      Creating the main iXML factory
        l_ixml = cl_ixml=>create( ).
      Creating a stream factory
        l_streamfactory = l_ixml->create_stream_factory( ).
        PERFORM get_xml_table CHANGING l_xml_table_size l_xml_table.
    here we use the CALL TRANSFORMATION method which calls
    the XSLT program "z_asnfile"
    TRY.
        CALL TRANSFORMATION ('Z_ASNFILE')
          SOURCE xml LT_TEXT_OUT[]
          RESULT xml_output = it_shipment
    catch any error, very helpful if the XSLT isn't correct
        CATCH cx_xslt_exception INTO xslt_err.
        err_string = xslt_err->get_text( ).
        WRITE: / 'Transformation error: ', err_string.
        EXIT.
      ENDTRY." setting a breakpoint to watch the workarea
    by the internal table "it_airplus"
           break-point.
      LOOP AT it_shipment INTO wa_shipment.
      ENDLOOP.
    *&      Form  get_xml_table
      FORM get_xml_table CHANGING l_xml_table_size TYPE i
                                  l_xml_table      TYPE STANDARD TABLE.
        l_filename = pa_file.
      upload a file from the client's workstation
        CALL METHOD cl_gui_frontend_services=>gui_upload
          EXPORTING
            filename   = l_filename
            filetype   = 'BIN'
          IMPORTING
            filelength = l_xml_table_size
          CHANGING
            data_tab   = l_xml_table
          EXCEPTIONS
            OTHERS     = 19.
        IF sy-subrc <> 0.
          MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
                     WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
        ENDIF.
    Convert binary to text.
    CALL FUNCTION 'SCMS_BINARY_TO_TEXT'
      EXPORTING
        INPUT_LENGTH          = 70000
                FIRST_LINE            = 0
                LAST_LINE             = 0
                APPEND_TO_TABLE       = ' '
                MIMETYPE              = ' '
        WRAP_LINES            = 'X'
              IMPORTING
                OUTPUT_LENGTH         =
      TABLES
        BINARY_TAB            = l_xml_table
        TEXT_TAB              = LT_TEXT_OUT
              EXCEPTIONS
                FAILED                = 1
                OTHERS                = 2
    IF SY-SUBRC <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
    ENDFORM.                    "get_xml_table

  • Advantages of using XSLT mapping

    Can any one explain me the advantages of using XSLT mapping compare to graphical.java and abap mappings

    Hi
    Please go through the below links for details on XSLT Mappings..
    XSLT Mapping
    /people/udo.martens/blog/2006/04/26/xslt-recursive-templates
    Thread:
    Sample XSLT mapping required
    XSLT Mapping Links::->
    /people/prasadbabu.nemalikanti3/blog/2006/03/30/xpath-functions-in-xslt-mapping
    /people/sreekanth.babu2/blog/2005/01/05/design-time-value-mappings-in-xslt
    /people/anish.abraham2/blog/2005/12/22/file-to-multiple-idocs-xslt-mapping
    XSLT Mapping with java enhancement
    /people/pooja.pandey/blog/2005/06/27/xslt-mapping-with-java-enhancement-for-beginners
    XSLT - ABAP.
    /people/r.eijpe/blog/2005/11/04/using-abap-xslt-extensions-for-xi-mapping
    exception handling errors in respect with XSLT mapping
    http://help.sap.com/saphelp_nw2004s/helpdata/en/8a/7672f7d7e444439fd7024f806221a4/content.htm
    Hope this will help
    Regards
    Piyush
    **reward points if found useful.

  • Can someone pleas tell me about abap, java and xslt mappings

    Hi,
    can someone please tell me about abap, java and xslt mappings.
    Thanks,
    Bernard.

    HI,
    JAVA mapping
    /people/prasad.ulagappan2/blog/2005/06/29/java-mapping-part-i /people/prasad.ulagappan2/blog/2005/06/29/java-mapping-part-ii /people/prasad.ulagappan2/blog/2005/06/29/java-mapping-part-iii /people/ravikumar.allampallam/blog/2005/06/24/convert-any-flat-file-to-any-idoc-java-mapping /people/amol.joshi2/blog/2006/03/10/think-objects-when-creating-java-mappings /people/sameer.shadab/blog/2005/09/29/testing-abap-mapping sample code for java mapping blog=/pub/wlg/4143 tutorial sax and dom
    ABAP mapping
    ABAP mappings run on ABAP Stack and are developed in the ABAP workbench of the Integration Server.
    You normally do not need to use the ABAP mappings and is preferable for someone with ABAP programming background. I should say JAVA functions would suffice any complex scenarios.
    refer step by step guides for ABAP Mapping
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/5c46ab90-0201-0010-42bd-9d0302591383
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/e3ead790-0201-0010-64bb-9e4d67a466b4
    /people/sameer.shadab/blog/2005/09/29/testing-abap-mapping
    ABAP Mapping
    /people/udo.martens/blog/2006/08/23/comparing-performance-of-mapping-programs
    https://websmp101.sap-ag.de/~sapdownload/011000358700003082332004E/HowToABAPMapping.pdf
    /people/ravikumar.allampallam/blog/2005/02/10/different-types-of-mapping-in-xi
    /people/r.eijpe/blog
    ABAP Mapping Vs Java Mapping.
    Re: Message Mapping of type ABAP Class not being shown
    Re: Performance of mappings (JAVA, XSLT, ABAP)
    XSLT Mapping
    XSLT stands for EXtensible Stylesheet Language Transformations. It is an XML based language for transforming XML documents into any other formats suitable for browser to display, on the basis of set of well-defined rules.
    /people/sap.user72/blog/2005/03/15/using-xslt-mapping-in-a-ccbpm-scenario
    /people/anish.abraham2/blog/2005/12/22/file-to-multiple-idocs-xslt-mapping
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/01a57f0b-0501-0010-3ca9-d2ea3bb983c1
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/9692eb84-0601-0010-5ca0-923b4fb8674a
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/006aa890-0201-0010-1eb1-afc5cbae3f15
    /people/prasadbabu.nemalikanti3/blog/2006/03/30/xpath-functions-in-xslt-mapping
    https://www.sdn.sap.com/irj/sdn/advancedsearch?cat=sdn_all&query=xslt+mapping&adv=false&sortby=cm_rnd_rankvalue#
    Steps required for developing XSLT Mapping
    u2022 Create a source data type and a target data type
    u2022 Create Message types for the source and target data types.
    u2022 Create Message Interfaces includes Inbound Message interface and Outbound Message interface.
    u2022 XSLT Mapping does not require creation of Message mapping, so donu2019t create any Message mapping.
    u2022 Create an .XSL file which converts source data type into target data type.
    u2022 Zip that .xsl file and import it into Integration Repository under Imported Archives.
    u2022 In Interface Mapping choose mapping program as XSL and specify this zip program. (Through search help you will get XSL Mapping programs that you imported under Imported Archives, select your corresponding XSL Program)
    u2022 Test this mapping program by navigating to Test tab.
    By having look at above steps you can easily find out that this mapping is no where different from other mapping programs, here the challenging lies in creating an XSLT file. If you spend couple of minutes in studying XPATH tutorial you would be in ideal position to create an XSL Transformation (.xsl extension).
    If you still find difficulties in generating XSL Transformation, then you can make use of a tool u201CAltova MapForceu201D which will create XSL file for you.
    Steps for creating XSL file using this tool:
    1. Open the Alto MapForce, import the source .xml and .xsd file in it
    2. Similarly import the target .xml and .xsd in MapForce.
    3. These two data files should match with source and target data types in Integration Repository.
    4. Complete the graphical mapping using extensive list of XSLT functions available there.
    5. Save the mapping file.
    6. Click the XSLT tab. You will have the entire xslt logic there.
    7. Copy that content and save it as .xsl file.
    8. Zip above .xsl file and import the same into IR under Imported Archives.
    Hope this clears your doubts
    Thanks
    Saiyog

  • XSLT  - Exception error when using XSLT 2.0 code in Transform on LiveCycle ES2

    I'm new to using this forum, so apologies in advance in I have posted this to the wrong place.
    I'm using Adobe LiveCycle ES2.5 (Jboss) and have written several complex XSLT scripts.  All have worked, with the exception of the latest one in which I have to sum a repeating subnode that maynot exist and if it does, may contain a number or be empty.  When I have used SUM by itself, it works perfectly if I all the nodes have values, but returns zero if any are missing or are empty.  After some searching I found a solution (which I have made bold) in the fragment below.
    <xsl:stylesheet version="2.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform" ...>
    <xsl:variable name="varUnitValueTotal" select="sum( (if(SOURCEUNITVALUE='') then 0 else SOURCEUNITVALUE) )"/>
    </xsl:stylesheet>
    I developed and tested this xslt in XMLSpy 2011 and it works a treat.  However, when I invoke the XSLT using the Services\XSLT Transformation 1.0\Transform, I get the following exception error:
    javax.xml.transform.TransformerConfigurationException: javax.xml.transform.TransformerException: javax.xml.transform.TransformerException: Could not find function: if
        at org.apache.xalan.processor.TransformerFactoryImpl.newTemplates(TransformerFactoryImpl.jav a:936)
        at org.apache.xalan.processor.TransformerFactoryImpl.newTransformer(TransformerFactoryImpl.j ava:774)
        at com.adobe.livecycle.xslt.XsltTransformer.transform(XsltTransformer.java:151)
    Now as far as the documentation is concerned ES2 and better should be using XSLT 2.0.  However to test a theory I changed the stylesheet version from 2.0 to 1.0 and re-ran the xslt in XMLSpy and it fell over at exactly the same place as the exception error.  Which makes me conclude that LC ES2+ is still using XSLT 1.0.
    Now I am stuck.  The only work around that I can see is to attempt to do the calculation in the form (which sort of defeats the point of usng XSLT).  That said I am reluctant to go down that path, since the maintenance overhead is going to be shocking if I have to apply to dozens of forms.
    Is there a way to tell the Transform service to use XSLT 2.0 and if so, how and what are the settings?  Or do I need to find and use a different transform engine, again if so which one should I use and what settings should I make at either JBoss and/or AdminUI level.
    Really hoping that someone can help.

    The XSLT service is configurable.
    http://help.adobe.com/en_US/LiveCycle/9.5/WorkbenchHelp/WS92d06802c76abadb-1cc35bda128261a 20dd-6750.html
    1) Stop LiveCycle.
    2) Add the .jars of your XSLT processor of choice to the LiveCycle server lib folder.
    3) Restart LiveCycle.
    4) Go to Workbench and stop the XSLT service. Right-click on XSLTService:1.0 and Edit Service Configuration.
    5) Enter the factory name for the given XSLT processor. I think for Xalan 2.7.1 it is org.apache.xalan.processor.TransformerFactoryImpl (but I could be wrong).
    6) Restart the service.
    Steve

  • Can we use XSLT mapping after graphical Mapping

    Hi,
    Can we use XSLT mapping after graphical mapping?
    My requirement is to generate two namespace attributes in the target output.
    So first I want to generate a structure using graphical mapping and then want to use XSLT mapping only to generate the second namespace XSI (leaving the rest of the structure as it is). Is it possible?
    <ns1:Test xmlns:ns1="wmdata.dwbi.interface" xsi:schemaLocation="wmdata.dwbi.interface w_interface_1.xsd" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
    Please post some solution. (I will reward points)
    Br,
    Madan Agrawal

    Hi Madan,
    Can we use XSLT mapping after graphical mapping?
    To me it seems feasible...
    But to using the two mappings one after another you will have to use BPM .
    Use transformation step for this to use the mapping and change in structure.
    Regards,

  • How to ignore prefix from XML while converting XML to csv using XSLT

    Hi All,
    I am trying to convert XML to csv file.
    the XML i have is like....
    <?xml version="1.0"?>
    <bulkCmConfigDataFile xmlns:es="SpecificAttributes.3.0.xsd" xmlns:un="utranNrm.xsd" xmlns:xn="genericNrm.xsd" xmlns:gn="geranNrm.xsd" xmlns="configData.xsd">
    <configData dnPrefix="Undefined">
            <xn:SubNetwork id="AU_R">
                <xn:SubNetwork id="H5RG_0501">
                    <xn:MeContext id="Firle_5070020">
                        <xn:ManagedElement id="1">
                   <un:RncFunction id="1">
                   <un:UtranCell id="50390303">
                                    <un:attributes>
                                        <un:userLabel>UtranCell 50390303</un:userLabel>
                                        <un:cId>52383</un:cId>
                                        <un:localCellId>50390303</un:localCellId>
                                        <un:uarfcnUl>9613</un:uarfcnUl>
                                        <un:uarfcnDl>10563</un:uarfcnDl>
                                        <un:primaryScramblingCode>502</un:primaryScramblingCode>
                                        <un:primaryCpichPower>287</un:primaryCpichPower>
                                        <un:maximumTransmissionPower>403</un:maximumTransmissionPower>
                                        <un:primarySchPower>-18</un:primarySchPower>
                                        <un:secondarySchPower>-20</un:secondarySchPower>
                                        <un:bchPower>-20</un:bchPower>
                                        <un:lac>50301</un:lac>
                                        <un:rac>1</un:rac>
                                        <un:sac>52383</un:sac>
                                        <un:utranCellIubLink>SubNetwork=AU_R,SubNetwork=H5RG_0501,MeContext=H5RG_0501,ManagedElement=1,RncFunction=1,IubLink=5039030</un:utranCellIubLink>
                                    </un:attributes>
                                </un:UtranCell>     
                   </un:RncFunction>
                        </xn:ManagedElement>   
                    </xn:MeContext>
             </xn:SubNetwork>
            </xn:SubNetwork>
        </configData>
    </bulkCmConfigDataFile>now when i am using XSLT functionality to convert this XML into a csv i want ignore all the prefix from this xml like "un" , "xn" etc....
    can anybody has idea how i can ignore all this value using XSLT

    I just dont understand why factory.setIgnoringElementContentWhitespace(true) did not work.That only does something if the XML has a DTD that enables it to know what whitespace can be ignored and what is significant. The API documentation for the method refers you to this document:
    http://www.w3.org/TR/REC-xml#sec-white-space

  • How to Count schedule lines in IDoc ORDERS05 using XSLT Mapping

    Hi Experts,
    In a Scenario where we are sending Purchase order (ORDERS05) to SAP SNC using XSLT Mapping,
    where in we need to count the no. of schedule lines against the Purchase Order line.
    As in Schedule line segment there is no such provision, so it needs to be handle in XSLT mapping to count the schedule lines.
    Can you all please guide me how to go about the same.
    Regards,
    Nitin P

    Hi Satish,
    Thank you very much for the reply,
    as there is only Quantity and other information is maintained against schedule lines how we can count the schedule line repeatation against PO line ? Is that very simple as you suggested or some other consideration also needs to be taken.
    Please clarify the same and let me also know if there are some standard documents also for the same.
    Regards,
    Nitin P

  • How to feed data to generate a html file using XSLT?

    I need to implement email content generation in the hmtl format using XSLT. The document information is stored in a xsl file and the data is generated dynmically in the application. How to feed the data to have the file?
    Thanks,
    v.

    Thanks for your information. I, however, already thought about using string stream instand of a XML file to pass in data. I am looking for a more intelligent method. It doesn't seem to have one so far.

  • How to use Value Mappings for simple translations?

    Hello,
    I want to use Value Mappings for simple translations in mappings, e.g. from IDoc to Inhouse structures.
    For example unit of quantity:
    IDOC    -->    INHOUSE
    PCE               P
    ABC               A
    How can I use Value Mapping for this? What should be used as Agency, what should be used for Scheme? What about groups? I tried the following: I created a new Value Mapping in Integration Directory:
    - Source Agency: DELVRY05
    - Source Scheme: MENEE (IDoc field name)
    - Target Acency: INHOUSE_DESADV (Name of structure)
    - Target scheme: UNIT (Name of field)
    Then, in the table, I added several lines for translating PCE to P and ABC to A and so on. But I have to define a group name for each line. I used INHOUSE. But than I get one INHOUSE group for each line.
    This seems very complicated for simple translations from A to B. I don't want to use FixValue in Message mappings.
    Any help appreciated.
    Thanks,
    Christoph

    Hello,
    @pavan kumar: Thanks, but I know all Blogs about Value Mappings. That does not help me. And I refer to PI 7.1.
    Lets get it very simple: I want to have exactly the same functionality of "FixValues" as ValueMappings. In 7.1, I need to define a Group for every row / line in the conversion table (e.g. for units of measurement conversion between IDoc and FlatFile). That does not make sense for me, as the Group is always the same, e.g. "Unit of measurement". So I will get dozens of same groups called "Unit of measurement".
    I don't really understand the concept of Groups. Maybe this is just not appropiate for my intenses? Maybe the Group has to be defined as one specific value of Unit of measurement, e.g. "pieces"?
    CHRISTOPH

  • ERROR WHILE USING XSLT MAPPING IN INTERFACE MAPPING

    Hi,
      We are using an xslt mapping in our scenario but while i load the XSLT mapping in the interface mapping i get a message :
    Transformer configuration exception occurred when loading XSLT
    sorce interface :outbound and asyncronous.
    mapping : XSLT mapping (imported as a zip file)
    target interface: abstract,asyncronous.
    The xslt runs well in standalone and its well formed and there is no name space issue.
    please help if any one has faced such a situation while using XSLT mapping.
    regards,
    Anirban.

    Hi Anirban
    When you say it runs well <i>standalone</i> what exactly do you mean? Which XSLT processor are you using to run it? There are subtle difference between XSTL processors that can sometimes result in incompatibilities. For instance, I have seen XSLTs run correctly in XMLSpy but incorrectly (or at least slightly differently) in XI.
    Regards,
    Thorsten

  • String to XML using XSLT..

    Hey folks
    Am having a XML in a single string in ma request and wanna convert that into a XML. Tried that using XSLT but seems am missing out on some point...It works fine with Stylus but fails within PI 
    Following code am using :
    <?xml version="1.0" encoding="UTF-8"?>
    <xsl:stylesheet version="2.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform" xmlns:a="http://www.sdn.com/xslt">
    <xsl:output method="xml" omit-xml-declaration="yes"/>
       <xsl:template match="/">
            <xsl:for-each select="//*:string">
             <xsl:value-of select="." disable-output-escaping="yes"/>
          </xsl:for-each>
    </xsl:template>
    </xsl:stylesheet>
    The name of the element in which i get the whole XML is  "string".
    My request string is something liek this :
    <xml version="1.0" encoding="UTF-8"?><ProductDefinition><RefNo>23232323</RefNo><Description>dfdfdfdfdf</Description></ProductDefinition>
    Now am trying to generate a XML using the XSL but its failing in PI...
    Kindly point out where am i going wrong?

    Thanks, but graphical mapping does not expose <![CDATAhttp:// ... ] to be removed. Surely this must be done with XSLT?+
    Don't worry about <![CDATA ... pass your whole string in source message like this : <![CDATAhttp://<?xml version=\"1.0\" encoding=\"UTF-8\"?><ProductDefinition><RefNo>12345</RefNo><Description>Test</Description></ProductDefinition>]>
    1st the graphical mapping where you use replace string will replace <?xml version=\"1.0\" encoding=\"UTF-8\"?>  and then the XSLT mapping would get a input like this : <![CDATAhttp://<ProductDefinition><RefNo>12345</RefNo><Description>Test</Description></ProductDefinition>]> which would eventually form your target structure...
    I tried it myself few days back so its a sure shot method ... just try it 
    Cheers!!!
    Soumen 

  • String to XML conversion using XSLT

    Hi all,
    I have a scenario when my source input XML is in the form of a string which needs to be transformed into an XML target fields.
    I am using XSLT mapping to do that and its working but unfortunately, input XML contain xml declaration <?xml version='1.0'?>. Because of which it fails.
    I need to remove this. Can any body please suggest how to do this?
    Any help will be appriciated.
    Regards
    -Kulwant

    Hi,
    Refer these links
    XI/PI: Convert Flat File to Deeply Nested XML Structures Using Only Graphical Mapping
    Regards,
    Surya

Maybe you are looking for

  • Images Aren't Showing Up In Flash

    My images aren't showing in my .swf file and they used to work.  I was wondering what happened.  Some help would be greatly appreciated.  Also wondering if there is a way to save a .swf file back as a flash file, I tried recreating the work that was

  • Hi my friend gave me an iphone but on the screen it says 'iphone disabled connect to itunes

    I have got an iphone 3 from my friend that had been used by his ex wife. The phone says ' iphone disabled connect to itunes. She 'cant remember her passcode' I have put the phone into restore mode and connected to itunes, ( i downloaded the latest ed

  • OID/DAS migrate content to new install with a different realm - help

    Hi all. Need some advice. We have a dev/test 9.0.4 (10gr1) apps environment that has a specific domain. However the PROD domain is different as the person who installed it couldn't work around the fact that the server had a different domain name than

  • IPod classic and Uconnect

    I have recently purchased a 2014 Dodge Ram. When I plug my iPod classic into the USB port, it plays - but it sounds like Alvin and the Chipmunks!  Has anyone else had this problem? The dealer says an iPod classic is not supported.  I'm playing though

  • Loop with dynamic where clause

    hi,     In a program we need to use a loop into an internal table with a where condition is decided on run time. "Select" from database table is using dynamic where clause and it is working fine. For the loop part does any one have any idea on this?