Documentation on cFolders and cProjects

Hi Friends,
If you are having any documentation on cFolders or cProjects, please help.
Any master guide or config guide would help.
Thanks & regards,
Nitisha Madan

Hi Nitish,
Please go through the following link from SAP Help, which will provides all the information about cProjects & cFolders
http://help.sap.com/saphelp_ppm450/helpdata/en/43/054880bbe822f5e10000000a1553f7/frameset.htm
http://help.sap.com/saphelp_cpro31/helpdata/en/48/8c8a3223ef1a42a0d45a67ecd8e5ac/frameset.htm
I hope you will find above urls very useful
Regrads,
Pramod

Similar Messages

Integration with cfolders and cprojects

Dear Experts,
Provide me cookbook for integration of cfolders and cprojects through KM.OR can anyone guide me about how we can do ?
Rewarded for the answer.
Thanks

Hi,
WebDAV interface enables a connection to be set up between cProjects or cFolders and SAP KM in the Portal.
Please find the below helpful links,
http://help.sap.com/saphelp_ppm400/helpdata/en/1b/8688428b42c553e10000000a1550b0/frameset.htm
https://forums.sdn.sap.com/message.jspa?messageID=7916774
Regards,
Vasu

Integration of cfolders and cprojects with KM

Dear experts,
can anyone guide me and tell the process or cookbook material for cprojects.
My requirement is ..
1) what is cprojects and cfolders what are its benefits in organisation ?
2) How it can integrate with KM?
Thanks in advance and provide you valuable marks for gud answer.
Regards
RS

Hi RS,
1. cProjects has additional functionality over Project Systems in being web based (webdynpro) so can be accesses externally to the organisation (hence the "c" for collaboration projects). It follows a stage gate methodology and has better resource management functions that PS. cFolders is complimentary to cProjects for sharing project documentation, which is better than say using DMS in ERP.
2. cFolders can integrate to collaboration rooms on the Enterprise Portal and hence to KM. There is standard Portal content for this.
Hope this helps.
BR
Dave

Cfolders and Cprojects

Hi there, I got a couple of questions, I couldn't find answers to these in any of the literature. Plz direct me to relevant documentation. My Questions are,
does Cproject differ from Cfolder?
does a Cproject have a Cfolder within itself?
Thx in advance!
Naga

Hi Naga,
in general cProject and cFolder are both part of the
SAP cProject Suite.
cFolder is used to handle and structure the communication within a project team and helps so to reduce the duration of a project.
On the other hand cProject is a tool which supports the whole project working process.
So from this point of view I would say the cProject deals with other functionalities then cFolder. So cProject also doesn't have a cFolder within but both create the SAP Project Suite.
For more information please see the SAP Online Help (http://help.sap.com) under
- mySAP ERP
- SAP cProject Suite
Best regards,
Christoph

CFolders and DMS Integration

Hi,
At present we have DMS. We are going in for cFolders now.
How do we integrate cFolders and DMS? What are the pre-requisites / configurations needed?
Where can I find the related documents?
Regards,
Rajesh

Hi,
please check the cFolders configuration guide (for release 4.0, the guide is also attached in note 973764), chapter u2018cFolders Back-End Integrationu2019 or the Online Help in the SAP Help Portal under http://help.sap.com/ > SAP ERP > SAP cProject Suite > Project and Portfolio Management XX > Design Collaboration with cFolders > cFolders Functions > cFolders Back-End Integration.
For example, you can use the back-end integration for cFolders to exchange DMS documents. In the DMS system (or so-called back-end system), use transaction CFE02 to export DMS documents to cFolders and CFI01 to import documents from cFolders into DMS.
Please read the above documentations to see the system and installation requirements.
Besides creating a RFC destination in transaction sm59, you need to maintain the backend system using transaction CFC01 in the DMS system. At least one cFolders system must be defined in the customizing before backend integration can be used.
In order to allow the user to create new documents in cFolders, he/she needs write and create authorization in the relevant folder.
Regards,
Silvia

General Info on integration between Project Systems (PS) and cProjects

Hi,
I would like some general info on the integration scenarios between PS and cProjects. Links to any documentation/blogs on this would also be very helpful.
Thanks,
Lashan

Hi Srini,
Thanks very much for the links. However, I've already gone through the standard documentation in SAP and they are a bit too high level/vague for me. I have considerable experience in xRPM, cProjects Suite and have good grasp of project management concepts, tool and techniques. My knowledge of PS is somewhat limited though.
What I am specifically looking for is what type integration options and scenarios are available. For example, cProjects can have phases and tasks defined. How would these integrate with for example WBS elements and networks in PS? What are the things you would do in cProjects and not PS and vice versa? Hope my question is clearer now.
Appreciate any further information you may have on the above.
Thanks,
Lashan

CS6 problem. When I open the Mask panel, it takes up the entire screen width and the Looks controls disappear, Also, there is a new panel below the Mask panel that seems to have no purpose that I can find. The documentation says "Mask and Look panels - Th

CS6 problem. When I open the Mask panel, it takes up the entire screen width and the Looks controls disappear, Also, there is a new panel below the Mask panel that seems to have no purpose that I can find. The documentation says "Mask and Look panels - The Mask panel is now placed next to the Look panel. WIth the masking and grading tools placed side-by-side, you can now work faster on the mask workflow." Is there a way to move, hide, or otherwise manipulate the panels for a custom layout? All the examples I can find on the Web show the Looks panel to the left of the Mask panel where the controls are available.

Ok, here is what I have so far. Appdelete the iWork and reinstalled. Pages and Number work, but not Keynote.
Now, I downloaded a couple apps that I need, and no matter what I did, the spinning ball came up and the download stopped till it unlocked itself. It is really frustrating because the download was not completed and whatever came through would not mount. Could this issue be the internet connection? Permission fix showed a lot of Airport issues. I will try to run permissions fix again.

Documentation for SalesCloud and Rightnow integration.?

Documentation for SalesCloud and Rightnow integration

Unfortunately I could not find any references for such documentation. You may want to contact support to see if they have had similar questions.
Jani Rautiainen
Fusion Applications Developer Relations
https://blogs.oracle.com/fadevrel/

Any one pls send me documentation on blocked and hierachi alv with example

hi experts,
any one pls send me documentation on blocked and hierachi alv with example
rewad points.........

Hi,
Check this prg:
BCALV_TEST_HIERSEQ_LIST
Regards,
Subramanian

Enduser documentation for fi and co

Hi Gurus,
Any body can provide enduser documentation for fi and co i will assign full points to you
[email protected]
Thanks
RAM

hi
What Are SAP End User Manual
It is the same for every other modules although here I reference it mainly for SAP HR.
1) You should understand which targeted group for the end-user training is for. Do they have any computer background or not.
2) In what way they are going to make use of the manuals supplied to them during the course of training.
Let us focus on how to prepare manuals:
In the client side , End Users are not permanent. If they get any better job outside they will resign and go out. Even if you train them well, again the end-user team disappears after some time. That is why implementing company( Client ) expects SAP Consultants to prepare documents which are self explanatory (even to a layman in SAP) and study themselves and use the sap easy access very comfortably.
Hence we should prepare a document which explains the following things comfortably:
A) All the buttons and Screens we have in sap and its importance for an end-user.
B) All the transaction codes used by end user.
C) The STEP by STEP usage methodology with screen shots and explanatory foot notes for each Transaction code.
D) Prepare a book a table and columns which should have the following information:
- Sl.NO.
- Transaction Code
- Navigation path
- Use of the Code
- Expected Result
- Achieved Result
- Remarks/Any Comment
E) Highlight the common troubles during the usage of SAP by an end- user and give the solutions (ready to use)
These problems you can come across while giving the in house training for the end-users. You just place them at one place and publish it for their usage in future for any of their new joinees as an end-user.
F) Every consultant is aware that the entire Organsiational Management is with end user only. Means consultant should train the end user in entire OM.
G) We should inform the importance of info types and usage for our purposes at expert mode, PA30, PA40 etc.,
H) Each field in the international infotypes should be explained very clearly and ensure that they are comfortable with the fields of infotypes which have been configured for their company.
For example : info type 0001 Org Assignment insists about the three structures of the HR. We should explain each sub field like Emp Group, Emp Sub Group, Personnel Area and Sub Area and its importance and relevance to their company so as to understand while processing them from the end- user point of view .
When an employee is hired into the company , now the end-user in a position to understand which employee group and subgroup, Personnel Area And Sub Area etc., should allotted..
Like this whatever comes across in SAP Easy Access should be insisted through the training of end users.
I) Demo, exercises and solutions should be provided in the manuals.
J) Glossary of terms and expansion of Acronyms, Abbreviations should be given. Like this each consultant should focus on end user training and prepare the documents.
What is the Difference between Consultant & End users?
SAP consultant role is to build the system, changes & modification/updation in currently installed SAP system for the end users.
SAP End user only use the SAP system just to fetch some info, or to create new thing. So a end user is just using the final product which it is meant for and consultnat design the product/updation and modification.
The roles and responsibilities of end users is working in easy access menu they will not have authorizations of using img settings if they get doubt they will send query to the implemented company and just entering day to day transactions.
Roles and Responsibilities of End User:
Using the software at the end or after the implementation is an End User.
In sap HR , we do come across entire Org Management creation by an end user after the Personnel strucutre is created. OM objects like creation of Org Unit means functional area or dpt , creation Job and Position and its occupancy is with in the limits of an enduser. Initiallly the OM is created by sap consultant . In course of time a new department has appeared in the company of the client .. this has to be created by the enduser rather than depending up on the implementor... similarly new job and position..like this small things are always done by the enduser.
The entire work of OM is purely depends upon the enduser.
After from this running periodical payroll and Ensuring of the Time schedules ( Work Schedules) of each employee is done from sap easy access by an enduser and the show run of payroll everymonth is by the enduser only. Like this lot of roles are there for an end user.
Whatever the problems come across during the enduser utilisation of sap ...that will reach as ticket to the support team
Explain what are the job responsibilities of END user & POWER user.
One would need user id and password to access SAP be it a developer, consultant, administrator, or end user.
End user is the one who performs transactions in SAP after it goes live. Such as posting an invoice, goods receipt, creating purchase orders, sales orders etc.
Power Users are users with advanced knowledge in certain applications and with special permissions or roles. They work in the specialist departments in the company and are available to other users as contact persons.
nagesh

Documentation of ALE and IDOC

Hi,
I am Beginer of ALE and IDOC .Could you please provide the processing documentation of ALE and IDOC with an example.
Thanks
Satya

Hi,
Read out ALE, EDI & IDOC of Arvind Nagpal. Its a very good book to understand the ALE\IDOC Concept.
or
http://www.riyaz.net/blog/beginners-guide-to-ale-and-idocs-a-step-by-step-approach/technology/sap/18/
Regards,
Narendra
Edited by: Narendra GSTIT on Jun 14, 2010 3:01 PM
Edited by: Narendra GSTIT on Jun 14, 2010 3:03 PM

Documentation on execCommand and postMessage

Hi,
Where can I find documentation on execCommand and postMessage of the AcroPDF control (used from c#,WPF)?
I am looking for a command which does search in the acro control and I am not successful at all.

Ah, this is the right forum. The Acrobat SDK isn't a separate thing you use or don't use. The SDK (Software Development Kit) is just information that developers need to work with Acrobat (and Adobe Reader). It's mostly documentation; a few samples (not the sort to copy/paste as complete projects); header files and so on.
Acrobat/Reader have several controls and you need the documentation; you won't find what you need by guesswork. They are all pretty limited, the heavy guns in the SDK are JavaScript and plug-ins. They are described in the section called Interapplication Communication (IAC). It's very strongly recommended to use ONLY what you find in the documentation; anything else you discover in object browsers etc. could leave you in trouble.
AxAcroPDF - available with Acrobat and Reader - has no FInd method. AcroExch - available with Acrobat only - offers a lot more facilities.

Documentation for wwv_flow_utilities and other wwv packages

Hi,
Where can I find documentation for wwv_flow_utilities and other wwv packages? It seems we have to use many of the variables/procedures/functions provided in certain situations.
Thanks,
Paresh

Hello Paresh,
The documentation is here. Click on the 'Application Express API Reference' for detailed info.
Greetings,
Roel
http://roelhartman.blogspot.com/
http://www.bloggingaboutoracle.org/
http://www.logica.com/

Documentation for LSMW and BDC

can anybody give me documentation for LSMW and bdc and its relevance in asset accounting.

Hi Anand,
there are several threads available in this forum for this topic. kindly do a search- you will get several useful material.
i have given u couple of useful links
LSMW
LSMW demo
BDC & LSMW
The last thread has both the topic u have asked about.
Thanks
Janani
award points if helpful

Documentation about SD and MM business flow

Hi,
Can any one send some documentation about SD and MM business flow.
My mail id is: <REMOVED>
thanks inadvance.
surya

chk the following links, they will give you all the required info
SD & MM flow
SD & MM Flow with Transaction Codes in SAP R/3 ystem
SD & MM Flow
how explain SD & MM flow in an interview?
Regards
AK
<REMOVED>

Documentation on cFolders and cProjects

Similar Messages

Maybe you are looking for