Documentation or guide for DB host to run SAPInst for Unicode Conversion

Hi,
In a distributed (CI and DB installed on separate host) SAP NW 7.0 ABAP+JAVA system Usage Type MI , I run SAPInst to export DB for Unicode conversion in DB host. But SAPInst failed to locate the java tools that I found them in the \usr\sap\<SID>\sys\globlal folder in CI host only.
Any documentation or guide with detail on the preparation of tool or files in a standalone DB host prior to execute System Copy -> Export DB with SAPInst.
Regards,
Ricky

Thanks Deepak, I'm trying to understand how a 220GB+ system can be compressed to 7GB. I can understand some shrinkage because of temp space and indexes, but that seems pretty extreme. I would have expected 70-90GB. Even 10% is 3x what I have.
The problem I am having is with sapinst. When I run the Export steps, all I am left with is exactly what you list. Just the LABEL, and the empty DATA and DB dir trees. sapinst finishes, says it was sucessful, but then when I fire up MIGMON to actually start the export, it is looking for DDLORA.TPL, and the EXT and STR files. Based on what I am reading, sapinst is supposed to create those (and I see them being generated during the PREP phase), but if I don't move things manually, export_monitor.sh just sees empty directories.
Let's do it a different way. Once you have completed running the sapinst export steps, what files are in the <export dir> that MIGMON is supposed to pick up and use?

Similar Messages

Server for Web hosting and email (only for 3 domains)

Hello guys,
I want to setup mac mini server for my company which will host only 3 web sites and email server for the moment.
What i got so far,
01. I have Macmini server
02. I have static ip address
03. I have router (vigor 2700) which forward the external ip address (my ip start from 87.197.XXX.XXX) in to my Server using DMZ hosts
(So i have 192.168.1.20 as my server ip address(local) and when i point 87.197.132.48 from out side (using web browser) i can see Mac server page)
So can i setup the server using this infomation. Just want to make sure that i allready got everythign to setup the server.
1st question : Do i have to all information to start this ?
Please help me with this first, then i will have more questions latter.
Thanks in advance

Migrate out of 192.168.1.0/24 (and 192.168.0.0/24) as those will cause problems for your eventual use of VPNs to connect into your network. Most every coffee shop and home network on the planet uses those, and the IP routing inherent in a VPN doesn't appreciate finding the same subnet on both ends of the VPN. The earlier you get your network out of those particular subnets - and preferably over to a subnet somewhere within the 172.16.0.0/12 or 10.0.0.0/8 blocks - the easier the network migration will be.
Set up your internal DNS services and your external DNS services (I'm assuming your local DNS server will not be delegated to serve DNS publicly) and particularly establish an A record in (at least) your public DNS referencing your mail server, and then enter that mail server A record entry as the MX mail exchange host for each of the three domains, and set up three virtual domains on the mail server.
If your gateway is sufficiently capable, you can have a separate domain or subdomain within your network, and have all your "public" names hosted externally. You can then use example.com outside, and example.net inside, and any example.com references from the outside or from the inside will resolve to your external static IP address and (if your gateway has the ability to "reflect" traffic to the public static IP) it'll all work most easily. If your gateway isn't capable, then you can also host the example.com domain internally in your local DNS server, but that means maintaining two parallel sets of DNS entries. Or you can get a more capable gateway. (I did not research your gateway.)
You'll want to read the Apple mail service documentation around alias entries, as there are two ways to do this. See the stuff around pages 73 and 77 in that document. Better still, just skim that mail service administration manual; that'll get you an introduction to the whole area and some familiarity with the general terms and concepts, and that manual is fairly readable.
Then read the TopicDesk Spam Documentation.
If you don't have IT staff around (some of your time, as well as that of others) to dedicate to this mail server management (including user management, troubleshooting, backups, etc.) hosting mail externally can be a good trade-off.

Error while running sapinst for system copy

Hi all,
For system copy activity of our ECC 6 system, we ran sapinst to take data export but it is not getting started and giving error "Login in process error -
An attempt to write to socket 1684 failed; reason: This application has requested the runtime to terminate it in an unusual way."
Any idea how to fix this !!!!!!
Thanks & Regards,
Pavan I

Hi,
Here is my opinion on this error, please try this out if you have downtime on your ECC system.
1. Reboot your windows system and then try exporting your DB.
2. Alternatively bring down your SAP system and DB and then try running the export and see whether it is moving fine.
Keep us posted with your feedback which will help to provide you with any other additional troubleshooting points.
Best Regards,
Vasanth G

Stored procedure for getting host name, host instance and status of that host is it running or stopped.

Hello all,
yesterday I got one task in that I have to stored procedure for getting host name, host instance and status of that host is it running or stopped.
any body knows where exactly, In which table this details are there in BizTalk databases.
thanks

Status of the host instance is not stored in the SQL database for you to query the status using stored procedure. You have to either use Powershell or WMI to get the status.
In SQL, following table contains the details about the host like Name, LoginName, IsDisables etc but status of the host instance is not stored in the database.
SELECT * FROM BizTalkMgmtDb..adm_HostInstance
Powershell to get the status:
http://axonolympus.nl/?page_id=186&post_id=969&cat_id=6&lang=en
WMI to get the status:
https://msdn.microsoft.com/en-us/library/aa561820.aspx?f=255&MSPPError=-2147217396
https://msdn.microsoft.com/en-us/library/aa578621.aspx
Regards,
M.R.Ashwin Prabhu
If this answers your question please mark it accordingly. If this post is helpful, please vote as helpful by clicking the upward arrow mark next to my reply.

Can I open a port range in the firewall for one host?

Can I open a port range in the firewall for one host? In other words, I want to be able to open ports 54001 to 54050 to allow one remote host in my LAN to access that port range in my Mac Server. Is this possible? Currently, the only option I see is to open individual ports for all external hosts (eg http or https)
Thanks in advance!

Which version of OS X Server are you using?
Server 2.2 and earlier includes an interface to a software firewall that can be configured to open specific ports very easily. Descriptions of how to configure the firewall can be found in the documentation for these versions.
Server 3.x no longer has an interface to the software firewall - it is still there, but you need to use other methods do configure it. A popular example of such a method is the icefloor utility.
Apple suggest that for Server 3 you delegate firewall duties to an external router. Server 3 includes the ability to configure the firewall component of Apple Airport routers 'automatically'
if you connect a machine running Server 3 directly to an Airport Router the router appears in the LH pane in the Server.app window (usually second line, below the entry for the server itself), and you can control what services are 'enabled' through the firewall there.
a more common solution perhaps is to use a non-apple router, and configure the firewall (and so open specific ports) through whatever control interface is provided for that router. There are many many kinds of hardware router you could use, and the control interfaces used vary widely - so you will have to consulting the documentation for your own router to work out how to do this.
If you post information about your software versions, and hardware configuration, it is possible that you can get more specific help with the tasks involved in opening the ports.
Hope this helps.

Acmcneill1ug 14, 2014 7:16 AM I have IMac OSX 10.9.4, 4GB,Processor 3.06 with Intell2Duo. I would like to check for Malware. I run a TechTool Pro 6 every month and that comes up great. When check how much memory I am using, with only Safar

Acmcneill1ug 14, 2014 7:16 AM
I have IMac OSX 10.9.4, 4GB,Processor 3.06 with Intell2Duo. I would like to check for Malware. I run a TechTool Pro 6 every month and that comes up great.
When check how much memory I am using, with only Safari open I am using 3.9 and more of her 4.0 memory. She is very. very slow in processing. I had 4000
trash to clean out and it took her over an hour to expel. Also for some reason Safari will not allow me to click on a link, in my G-mail, and let it go to the page.
It has a sign saying a pop-up blocker is on and will not let me do it. I must open the stamp to look at my e-mails and if I have redirected link now I can do it.
I have not changed my preferences so where is this pop-up blocker?
I have looked at preferences on Safari and Google, which I do not understand Google, and do not see where this blocker could be.
Malware is something I want to make sure is not on my computer. Tech Tool Pro 6 is all I know of and it does not detect Malware.
Help.
Ceil

Try Thomas Reed's Adware removal tool. He posts extensively in the communities.
Malware Guide - Adware
Malware Discussion

I have an early 2011 MacBook Pro which has been running slow for a while. After looking at responses to similar problems I have downloaded and run EtreCheck and will post the output. Please can someone help me with what it all means.Thanks in advance

I have an early 2011 MacBook Pro which has been running slow for a while. After looking at responses to similar problems I have downloaded and run EtreCheck. Please can someone help me with what it all means.
Thanks in advance.
EtreCheck version: 1.9.15 (52)
Report generated 19 September 2014 08:07:14 GMT+8
Hardware Information: ?
MacBook Pro (13-inch, Early 2011) (Verified)
MacBook Pro - model: MacBookPro8,1
1 2.3 GHz Intel Core i5 CPU: 2 cores
4 GB RAM
Video Information: ?
Intel HD Graphics 3000 - VRAM: 384 MB
Color LCD 1280 x 800
System Software: ?
OS X 10.9.4 (13E28) - Uptime: 0 days 0:4:29
Disk Information: ?
Hitachi HTS545032B9A302 disk0 : (320.07 GB)
S.M.A.R.T. Status: Verified
EFI (disk0s1) <not mounted>: 209.7 MB
Macintosh HD (disk0s2) / [Startup]: 319.21 GB (147 GB free)
Recovery HD (disk0s3) <not mounted>: 650 MB
MATSHITADVD-R UJ-898
USB Information: ?
Apple Inc. FaceTime HD Camera (Built-in)
Apple Inc. BRCM2070 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Inc. Apple Internal Keyboard / Trackpad
Apple Computer, Inc. IR Receiver
Thunderbolt Information: ?
Apple Inc. thunderbolt_bus
Gatekeeper: ?
Mac App Store and identified developers
Kernel Extensions: ?
[not loaded] com.seagate.driver.PowSecDriverCore (5.2.4 - SDK 10.4) Support
[not loaded] com.seagate.driver.PowSecLeafDriver_10_4 (5.2.4 - SDK 10.4) Support
[not loaded] com.seagate.driver.PowSecLeafDriver_10_5 (5.2.4 - SDK 10.5) Support
[not loaded] com.seagate.driver.SeagateDriveIcons (5.2.4 - SDK 10.4) Support
[loaded] com.sophos.kext.sav (9.1.55 - SDK 10.7) Support
[loaded] com.sophos.nke.swi (9.1.50 - SDK 10.8) Support
Launch Daemons: ?
[loaded] com.adobe.fpsaud.plist Support
[loaded] com.microsoft.office.licensing.helper.plist Support
[running] com.sophos.autoupdate.plist Support
[running] com.sophos.configuration.plist Support
[running] com.sophos.intercheck.plist Support
[running] com.sophos.notification.plist Support
[running] com.sophos.scan.plist Support
[running] com.sophos.sxld.plist Support
[running] com.sophos.webd.plist Support
[running] com.trusteer.rooks.rooksd.plist Support
Launch Agents: ?
[loaded] com.divx.dms.agent.plist Support
[loaded] com.divx.update.agent.plist Support
[running] com.sophos.uiserver.plist Support
[running] com.trusteer.rapport.rapportd.plist Support
User Launch Agents: ?
[loaded] com.adobe.ARM.[...].plist Support
[running] com.amazon.music.plist Support
[loaded] com.google.keystone.agent.plist Support
[not loaded] jp.co.canon.Inkjet_Extended_Survey_Agent.plist Support
User Login Items: ?
iTunesHelper
TomTomHOMERunner
AdobeResourceSynchronizer
Dropbox
Internet Plug-ins: ?
FlashPlayer-10.6: Version: 15.0.0.152 - SDK 10.6 Support
DivX Web Player: Version: 3.2.1.977 - SDK 10.6 Support
AdobePDFViewerNPAPI: Version: 11.0.09 - SDK 10.6 Support
AdobePDFViewer: Version: 11.0.09 - SDK 10.6 Support
Flash Player: Version: 15.0.0.152 - SDK 10.6 Support
EPPEX Plugin: Version: 10.0 Support
Default Browser: Version: 537 - SDK 10.9
OVSHelper: Version: 1.1 Support
QuickTime Plugin: Version: 7.7.3
SharePointBrowserPlugin: Version: 14.4.4 - SDK 10.6 Support
iPhotoPhotocast: Version: 7.0 - SDK 10.7
Safari Extensions: ?
Ultimate
Audio Plug-ins: ?
BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
AirPlay: Version: 2.0 - SDK 10.9
AppleAVBAudio: Version: 203.2 - SDK 10.9
iSightAudio: Version: 7.7.3 - SDK 10.9
iTunes Plug-ins: ?
Quartz Composer Visualizer: Version: 1.4 - SDK 10.9
3rd Party Preference Panes: ?
Flash Player Support
Perian Support
Trusteer Endpoint Protection Support
Time Machine: ?
Skip System Files: NO
Auto backup: YES
Volumes being backed up:
Macintosh HD: Disk size: 297.29 GB Disk used: 160.38 GB
Destinations:
Data [Network] (Last used)
Total size: 2 TB
Total number of backups: 99
Oldest backup: 2012-04-20 17:05:32 +0000
Last backup: 2014-09-18 23:49:25 +0000
Size of backup disk: Excellent
Backup size 2 TB > (Disk size 297.29 GB X 3)
Time Machine details may not be accurate.
All volumes being backed up may not be listed.
Top Processes by CPU: ?
 6% InterCheck
 5% iCalExternalSync
 3% WindowServer
 2% CalendarAgent
 2% SystemUIServer
Top Processes by Memory: ?
152 MB SophosScanD
147 MB InterCheck
106 MB SophosAntiVirus
66 MB Dropbox
57 MB com.apple.iTunesLibraryService
Virtual Memory Information: ?
161 MB Free RAM
1.55 GB Active RAM
1.41 GB Inactive RAM
902 MB Wired RAM
611 MB Page-ins
0 B Page-outs

Uninstall Trusteer software
http://www.trusteer.com/support/uninstalling-rapport-mac-os-x
Remove Sophos
https://discussions.apple.com/message/21069437#21069437

*UPDATED 7/15/04* Complete guide to bioses, drivers, and needed files for the MSI K8N Neo Platinum

Complete newbie's guide to bioses, drivers, and needed files for the MSI K8N Neo Platinum:
Last Updated: Thursday July 15th, 2004
Bioses:
(In order of date released.)
1.1b3 - (Download)
- Pre-1.1, given to reviewers to use in their reviews and benchmarks.
- Less stable, but supposedly you get slightly better overclocks.
1.1 Official - (Download)
1. This is AWARD BIOS release
2. This BIOS fixes the following problems of the previous version:
- Memory always run DDR 200 when install single side DDR on DIMM2 & DIMM3.
- Windows 2000 can't format the RAID IDE HDD when plug in Promise 378 controller.
1.2b5 - (Download)
1.2b7 - (No Download Yet)
1.2b10 - (Download)
- First attempt to fix false temperature readings. Fixes it for some people with Newcastle cores and doesn't fix it for anybody with Clawhammer cores.
1.2b12 - (Download)
- Second attempt to fix false temperature readings. Fixes it for some people with Newcastle cores and some people with Clawhammer cores.
1.3b1 - (Download)
- Another attempt to fix temperature problems?
- Possibly fixes cold boot/power light issues?
1.2 Official - (Download)
1. This is AWARD BIOS release
2. This BIOS fixes the following problems of the previous version:
- System can't resume from S3 sometimes when install USB device.
- Support K8 Sempron CPU.
- Turn off keyboard LED in S3.
--Quick Guide for flashing BIOS, provided by MSI--
1. Create a MS-DOS boot diskette, then copy the the .exe and the bios file to the floppy disk. Both of these files can be found in the package you downloaded.
2. Press "Delete" and go to BIOS setup while computer bootup.
Check BIOS advanced features and see if BIOS flash write control is enabled
(This option must be enabled. If you can not find this setting, it means the BIOS can be
flashed.)
3. Boot from MS-DOS boot diskette and get a:\> prompt.
4. Type "", then press ENTER
5. The flash program will then ask "Do you want to save BIOS?", please press "N" for no. The when you see Press 'Y' to program or 'N' to Exit, please press "Y" to continue.
6. After flashing complete, remove floppy and reset the system .
7. Press DELETE or F1 when prompted at first reboot after flashing.
8. Load BIOS optimized defaults, then save settings and exits.
Drivers & Needed Files:
(Note: All these drivers are for Windows XP.)
Leaked Nvidia nForce3 Chipset Drivers Version 4.40
(Please use at your own risk, these are LEAKED drivers. Password for the .zip file is "ocworkbench rules". Also, you will need to rename the WinXP_2K folder in IDE to either WinXP or Win2K else the installer doesn't pick it up.) Thanks for the link Wonkanoby!
*NEW* Leaked Nvidia nForce3 Chipset Drivers Version 5.03
More leaked drivers? Seems some parts of the drivers are older and some are newer.
1. Windows XP Service Pack 1A (Web Install) -or- Windows XP Service Pack 1A (Full Install)
2. Microsoft DirectX 9.0b (Web Install) -or- Microsoft DirectX 9.0b (Full Install)
3. Nvidia nForce3 Chipset Drivers Version 4.24
4. AMD Athlon 64 Processor Driver Version 1.1.0.14
5. Nvidia Video Card Driver Version 56.72 -or- Omega Nvidia Video Card Driver Version v1.5303
(The Omega drivers are third party drivers optimized for gaming, most prefer these over the standard Nvidia drivers.)
5. ATI Video Card Driver Version 4.7 -or- Omega ATI Video Card Driver Version 2.5.51
(The Omega drivers are third party drivers optimized for gaming, most prefer these over the standard ATI drivers.)
6. Onboard Sound Driver (Realtek AC'97 Audio Codec) Version A3.61
It is HIGHLY reccomended that you install the drivers/needed files in the order listed above. Please note that there are two #5's because you either install one or the other depending on your video card, do not install both of them.
You will come across a problem here though. You can't install the chipset drivers without installing the Windows service pack and DirectX first, but the Windows service pack and DirectX installs need the internet to download files and you won't have working internet until you install the chipset drivers. Here's what I did to get around this. Instead of downloading the web install versions of Windows service pack and DirectX, download the full version and and put them along with all the other drivers on a backup hard drive or burn them to a CD, this way you will have all the drivers you need when it's time to install them and none of them will require the internet to download files.
Another note when installing drivers. Apparently the Nvidia chipset drivers also come with drivers for the onboard sound, but people seem to agree that the Realtek onboard sound drivers are better. When you are installing the Nvidia chipset drivers, just be sure to uncheck the box for sound drivers when it asks you which drivers you would like to install. Now you can safely install the Realtek drivers without any chance of conflicting sound drivers. Thanks for the tip Wonkanoby!

Quote
Originally posted by RLiu818
Quote
Originally posted by Deviation56
Quote
Originally posted by RLiu818
You CAN install the nforce drivers BEFORE installing SP1. The only requirement to install the nforce drivers is DX9.
So is SP1 still recommended to install before the nforce drivers?
The installer still reccomends to install it beforehand for full USB 2.0 functionality... I would have put what you said in there but I wanted to keep it as simple as possible.
oh. IIRC the installer just says USB 2.0 will be fully functional after SP1 is installed. So after you install SP1 you go into device manager and u click update driver and it will auto search and update the driver.
Simplicity-wise, i guess its pretty much equal. It might take less preparation to just copy DX9 full onto a CD and install that first, then nforce driver, then right away you have yoru internet connection.
but i dunno.. i guess i will try it your way this time when my RMA"d board comes.
i will be fomratting and doing a fresh install later on today and will let you know if i come across any problems

Using MD50 to run MRP for Sale Order

Dear all,
I have some problem when using MD50 with Mill Product Industry.
When SAP system not activate Mill Product yet. I used transaction code MD50 to run MRP for Sale Order, the system have generated planned order for multilevel. But when SAP system have activated Mill Product, I used transaction code MD50 to run MRP for Sale Order, the system only generate planned order for single level. I think that we have to configure something based on Mill Product Industry. So can you help me for this
Thanks, Regards

Hi,
Check with following links which may help you resolve your issue :
http://www.sap.com/sme/whysap/industries/millproducts/index.epx
http://help.sap.com/saphelp_di471/helpdata/en/4e/1796374b088e5ce10000009b38f8cf/frameset.htm
http://help.sap.com/content/documentation/industry/docu_is_mill.htm
Regards,
Tejas

My macbook pro has been running slow for quite some time

Hello, my MacBook Pro has been running slow for quite some time now and it's frustrating. I hope you'll be able to help me. I've read this thread and figured out I should open a new one, so here it is.
I've already downloaded Etrechech and ran it and this is what I got:
EtreCheck version: 2.0.6 (91)
Report generated 22 Oct 2014 08:21:16 GMT+2
Hardware Information: ℹ️
MacBook Pro (13-inch, Late 2011) (Verified)
MacBook Pro - model: MacBookPro8,1
1 2.4 GHz Intel Core i5 CPU: 2-core
4 GB RAM Upgradeable
BANK 0/DIMM0
2 GB DDR3 1333 MHz ok
BANK 1/DIMM0
2 GB DDR3 1333 MHz ok
Bluetooth: Old - Handoff/Airdrop2 not supported
Wireless: en1: 802.11 a/b/g/n
Video Information: ℹ️
Intel HD Graphics 3000 - VRAM: 384 MB
Color LCD 1280 x 800
System Software: ℹ️
OS X 10.9.4 (13E28) - Uptime: 1:19:18
Disk Information: ℹ️
Hitachi HTS545050B9A302 disk0 : (500,11 GB)
S.M.A.R.T. Status: Verified
EFI (disk0s1) <not mounted> : 210 MB
Macintosh HD (disk0s2) / [Startup]: 499.25 GB (312.03 GB free)
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
MATSHITADVD-R UJ-8A8
USB Information: ℹ️
Apple Inc. FaceTime HD Camera (Built-in)
Apple Inc. Apple Internal Keyboard / Trackpad
Apple Inc. BRCM2070 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Computer, Inc. IR Receiver
Thunderbolt Information: ℹ️
Apple Inc. thunderbolt_bus
Gatekeeper: ℹ️
Mac App Store and identified developers
Launch Agents: ℹ️
[invalid?] com.genieo.engine.plist Support
[loaded] com.google.keystone.agent.plist Support
[loaded] com.hp.help.tocgenerator.plist Support
[loaded] com.oracle.java.Java-Updater.plist Support
Launch Daemons: ℹ️
[loaded] com.adobe.fpsaud.plist Support
[loaded] com.barebones.authd.plist Support
[loaded] com.google.keystone.daemon.plist Support
[loaded] com.microsoft.office.licensing.helper.plist Support
[loaded] com.oracle.java.Helper-Tool.plist Support
User Launch Agents: ℹ️
[loaded] com.adobe.ARM.[...].plist Support
User Login Items: ℹ️
Garmin Express Service Application (/Applications/Garmin Express.app/Contents/Library/LoginItems/Garmin Express Service.app)
Dropbox Application (/Applications/Dropbox.app)
HPEventHandler UNKNOWN (missing value)
Internet Plug-ins: ℹ️
o1dbrowserplugin: Version: 5.4.2.18903 Support
Unity Web Player: Version: UnityPlayer version 4.0.1f1 Support
Default Browser: Version: 537 - SDK 10.9
AdobePDFViewerNPAPI: Version: 10.1.3 Support
FlashPlayer-10.6: Version: 15.0.0.152 - SDK 10.6 Support
Silverlight: Version: 4.1.10329.0 Support
Flash Player: Version: 15.0.0.152 - SDK 10.6 Mismatch! Adobe recommends 15.0.0.189
QuickTime Plugin: Version: 7.7.3
googletalkbrowserplugin: Version: 5.4.2.18903 Support
SharePointBrowserPlugin: Version: 14.0.0 Support
AdobePDFViewer: Version: 10.1.3 Support
GarminGpsControl: Version: 4.1.0.0 Release - SDK 10.7 Support
ViewRightWebPlayer: Version: 3.3.0.0 Support
proXSignXML: Version: 1.2.21 - SDK 10.5 Support
JavaAppletPlugin: Version: Java 7 Update 55 Check version
User Internet Plug-ins: ℹ️
OctoshapeWeb: Version: 1.0 - SDK 10.8 Support
Picasa: Version: 1.0 Support
Google Earth Web Plug-in: Version: 7.1 Support
Safari Extensions: ℹ️
AdBlock
3rd Party Preference Panes: ℹ️
Flash Player Support
Java Support
Spelling Support
Time Machine: ℹ️
Skip System Files: NO
Mobile backups: OFF
Auto backup: NO - Auto backup turned off
Volumes being backed up:
Macintosh HD: Disk size: 499.25 GB Disk used: 187.22 GB
Destinations:
VERBATIM HD [Local]
Total size: 999.86 GB
Total number of backups: 0
Oldest backup: 2012-10-07 19:12:45 +0000
Last backup: 2012-10-07 19:12:45 +0000
Size of backup disk: Adequate
Backup size 999.86 GB > (Disk used 187.22 GB X 3)
Top Processes by CPU: ℹ️
 14% Safari
 12% WindowServer
 4% coreaudiod
 3% com.apple.WebKit.Networking
 2% hidd
Top Processes by Memory: ℹ️
220 MB Safari
43 MB WindowServer
26 MB mds
26 MB com.apple.WebKit.Networking
26 MB Microsoft Word
Virtual Memory Information: ℹ️
21 MB Free RAM
1.01 GB Active RAM
992 MB Inactive RAM
1.00 GB Wired RAM
1.14 GB Page-ins
49 MB Page-outs
I hope you'll be able to help me.

Right, sorry. I'm new at this stuff and I got confused. Here's the list:
EtreCheck version: 2.0.6 (91)
Report generated 22 Oct 2014 15:43:33 GMT+2
Hardware Information: ℹ️
MacBook Pro (13-inch, Late 2011) (Verified)
MacBook Pro - model: MacBookPro8,1
1 2.4 GHz Intel Core i5 CPU: 2-core
4 GB RAM Upgradeable
BANK 0/DIMM0
2 GB DDR3 1333 MHz ok
BANK 1/DIMM0
2 GB DDR3 1333 MHz ok
Bluetooth: Old - Handoff/Airdrop2 not supported
Wireless: en1: 802.11 a/b/g/n
Video Information: ℹ️
Intel HD Graphics 3000 - VRAM: 384 MB
Color LCD 1280 x 800
System Software: ℹ️
OS X 10.9.5 (13F34) - Uptime: 2:39:48
Disk Information: ℹ️
Hitachi HTS545050B9A302 disk0 : (500,11 GB)
S.M.A.R.T. Status: Verified
EFI (disk0s1) <not mounted> : 210 MB
Macintosh HD (disk0s2) / [Startup]: 499.25 GB (310.28 GB free)
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
MATSHITADVD-R UJ-8A8
USB Information: ℹ️
Apple Computer, Inc. IR Receiver
Apple Inc. FaceTime HD Camera (Built-in)
Apple Inc. BRCM2070 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Inc. Apple Internal Keyboard / Trackpad
Thunderbolt Information: ℹ️
Apple Inc. thunderbolt_bus
Gatekeeper: ℹ️
Mac App Store and identified developers
Launch Agents: ℹ️
[loaded] com.google.keystone.agent.plist Support
[loaded] com.oracle.java.Java-Updater.plist Support
Launch Daemons: ℹ️
[loaded] com.adobe.fpsaud.plist Support
[loaded] com.barebones.authd.plist Support
[loaded] com.google.keystone.daemon.plist Support
[loaded] com.microsoft.office.licensing.helper.plist Support
[loaded] com.oracle.java.Helper-Tool.plist Support
User Launch Agents: ℹ️
[loaded] com.adobe.ARM.[...].plist Support
User Login Items: ℹ️
HPEventHandler UNKNOWN (missing value)
Internet Plug-ins: ℹ️
o1dbrowserplugin: Version: 5.4.2.18903 Support
Unity Web Player: Version: UnityPlayer version 4.0.1f1 Support
Default Browser: Version: 537 - SDK 10.9
AdobePDFViewerNPAPI: Version: 10.1.3 Support
FlashPlayer-10.6: Version: 15.0.0.189 - SDK 10.6 Support
Silverlight: Version: 4.1.10329.0 Support
Flash Player: Version: 15.0.0.189 - SDK 10.6 Support
QuickTime Plugin: Version: 7.7.3
googletalkbrowserplugin: Version: 5.4.2.18903 Support
SharePointBrowserPlugin: Version: 14.0.0 Support
AdobePDFViewer: Version: 10.1.3 Support
GarminGpsControl: Version: 4.1.0.0 Release - SDK 10.7 Support
ViewRightWebPlayer: Version: 3.3.0.0 Support
proXSignXML: Version: 1.2.21 - SDK 10.5 Support
JavaAppletPlugin: Version: Java 7 Update 55 Check version
User Internet Plug-ins: ℹ️
OctoshapeWeb: Version: 1.0 - SDK 10.8 Support
Picasa: Version: 1.0 Support
Google Earth Web Plug-in: Version: 7.1 Support
Safari Extensions: ℹ️
AdBlock
3rd Party Preference Panes: ℹ️
Flash Player Support
Java Support
Spelling Support
Time Machine: ℹ️
Skip System Files: NO
Mobile backups: ON
Auto backup: YES
Volumes being backed up:
Macintosh HD: Disk size: 499.25 GB Disk used: 188.97 GB
Destinations:
VERBATIM HD [Local]
Total size: 999.86 GB
Total number of backups: 2
Oldest backup: 2012-10-07 19:12:45 +0000
Last backup: 2012-10-07 19:12:45 +0000
Size of backup disk: Adequate
Backup size 999.86 GB > (Disk used 188.97 GB X 3)
Top Processes by CPU: ℹ️
 5% Safari
 4% coreaudiod
 3% WindowServer
 1% hidd
 0% Microsoft Word
Top Processes by Memory: ℹ️
193 MB Safari
26 MB WindowServer
26 MB Skype
21 MB PluginProcess
21 MB mds
Virtual Memory Information: ℹ️
32 MB Free RAM
852 MB Active RAM
828 MB Inactive RAM
1.02 GB Wired RAM
2.15 GB Page-ins
95 MB Page-outs

Setting apache as a front end host-proxy web server for weblogic 10.3.3

Hi ,
i have installed apache 2.2.21 in the red hat linux 6 environment.Now i am trying to set that apache web server as a front end host ,proxy web server for my weblogic 10.3 application server cluster. My apache is listening to the port 8080.
What changes i had to made in admin console of my server as well as in the httpd.conf file of apache.
Can any one guide me how to proceed ?
Any help is highly appreciated......

Thanks Ravi,
i have already gone through http://docs.oracle.com/cd/E12840_01/wls/docs103/plugins/apache.html.
In my case "mod_wl_22.so" was not available but i downloaded this p10051826_1033_Generic.zip file from where i got that file and make it available in the modules directory, changed the file permissions (using chmod 755 mod_wl_22.so) and also changed the httpd.conf file as below :
LoadModule weblogic_module modules/mod_wl_22.so
<IfModule mod_weblogic.c>
WebLogicCluster wlserv1:7001,wlserv2.com:7001
MatchExpression *.jsp
</IfModule>
By using /bin/ls command i checked the following :
/bin/ls: ELF 64-bit LSB executable, x86-64, version 1 (SYSV), dynamically linked (uses shared libs), for GNU/Linux 2.6.18, stripped
Using file mod_wl_22.so i checked the following:
mod_wl_22.so: ELF 64-bit LSB shared object, x86-64, version 1 (SYSV), dynamically linked, not stripped
My problem is when i used ./apachectl -t i got the following error :
httpd: Syntax error on line 112 of /u40/app/apache/conf/httpd.conf:
Cannot load /u40/app/apache/modules/mod_wl_22.so into server: libstdc++.so.5:
cannot open shared object file: No such file or directory
So can u please guide me where my problem is and how to rectify it ? Its urgent. please help me.
Thanks
Jyoti Ranjan

BT2010 Installed Cum Update Packs for Adapters and getting run-time errors with WCF-SQL

The process has been working fine for months. Then we installed Cum Update packs to BT2010 (I'll get the exact C.U.'s from our admin guy) and last night got probably 20 errors similar to below.
   - Installed CU6 for BT2010
   - Installed CU3 for LOB (Adapters)
The SQL stored proc returns a mix of strings, integers, Guids, and dates; the BizTalk schema looks like matches perfectly. The stored proc runs fine in SSMS.
Got two errors for each, 1 in XLANG/s for the orchestration, and 1 for the Send port that calls the WCF-SQL adapter from the orchestration, and also 1 warning.
NOTE: This orchestration runs every 15 minutes 24x7. It calls the Stored Proc to find out which extracts it needs to create. Most all the extracts run at night. So if I run the stored proc during the day, it normally returns an empty result
set. Yet, the error below is happening every 15 minutes, even when the result set is empty. How can it generate a data conversion error when there is no data to be converted?
ORCHESTRATION/XLANG ERROR:
xlang/s engine event log entry: Uncaught exception (see the 'inner exception' below) has suspended an instance of service 'Common.Extract.Orchestrations.EFSRExtractHandler(2b35190e-5f11-e360-9ae8-daaf0372cbc3)'.
The service instance will remain suspended until administratively resumed or terminated.
If resumed the instance will continue from its last persisted state and may re-throw the same unexpected exception.
InstanceId: dc354922-73ef-46fc-ac3d-dbf793e5aaf8
Shape name:
ShapeId:
Exception thrown from: segment -1, progress -1
Inner exception: An error occurred while processing the message, refer to the details section for more information
Message ID: {066027B8-4750-4D63-A746-1390E9959E49}
Instance ID: {5A978538-5DD7-40D1-8826-D0486D129F84}
Error Description: System.InvalidCastException: Failed to convert parameter value from a String to a Guid. ---> System.InvalidCastException: Invalid cast from 'System.String' to 'System.Guid'.
   at System.Convert.DefaultToType(IConvertible value, Type targetType, IFormatProvider provider)
   at System.Convert.ChangeType(Object value, Type conversionType, IFormatProvider provider)
   at System.Data.SqlClient.SqlParameter.CoerceValue(Object value, MetaType destinationType, Boolean& coercedToDataFeed, Boolean& typeChanged, Boolean allowStreaming)
   --- End of inner exception stack trace ---
Server stack trace:
   at System.Runtime.AsyncResult.End[TAsyncResult](IAsyncResult result)
   at System.ServiceModel.Channels.ServiceChannel.SendAsyncResult.End(SendAsyncResult result)
   at System.ServiceModel.Channels.ServiceChannel.EndCall(String action, Object[] outs, IAsyncResult result)
   at System.ServiceModel.Channels.ServiceChannel.EndRequest(IAsyncResult result)
Exception rethrown at [0]:
   at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage reqMsg, IMessage retMsg)
   at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData& msgData, Int32 type)
   at System.ServiceModel.Channels.IRequestChannel.EndRequest(IAsyncResult result)
   at Microsoft.BizTalk.Adapter.Wcf.Runtime.WcfClient`2.RequestCallback(IAsyncResult result)
Exception type: XlangSoapException
Source: Microsoft.XLANGs.BizTalk.Engine
Target Site: Void VerifyTransport(Microsoft.XLANGs.Core.Envelope, Int32, Microsoft.XLANGs.Core.Context)
The following is a stack trace that identifies the location where the exception occured
   at Microsoft.BizTalk.XLANGs.BTXEngine.BTXPortBase.VerifyTransport(Envelope env, Int32 operationId, Context ctx)
   at Microsoft.XLANGs.Core.Subscription.Receive(Segment s, Context ctx, Envelope& env, Boolean topOnly)
   at Microsoft.XLANGs.Core.PortBase.GetMessageIdForSubscription(Subscription subscription, Segment currentSegment, Context cxt, Envelope& env, CachedObject location)
   at Common.Extract.Orchestrations.EFSRExtractHandler.segment1(StopConditions stopOn)
   at Microsoft.XLANGs.Core.SegmentScheduler.RunASegment(Segment s, StopConditions stopCond, Exception& exp)
SEND PORT ERROR:
A message sent to adapter "WCF-Custom" on send port "Send_SQL_Orch_Call_GetAirportsForExtract" with URI "mssql://QADBAlias.datacenter.local//QTAviation?" is suspended.
Error details: System.InvalidCastException: Failed to convert parameter value from a String to a Guid. ---> System.InvalidCastException: Invalid cast from 'System.String' to 'System.Guid'.
   at System.Convert.DefaultToType(IConvertible value, Type targetType, IFormatProvider provider)
   at System.Convert.ChangeType(Object value, Type conversionType, IFormatProvider provider)
   at System.Data.SqlClient.SqlParameter.CoerceValue(Object value, MetaType destinationType, Boolean& coercedToDataFeed, Boolean& typeChanged, Boolean allowStreaming)
   --- End of inner exception stack trace ---
Server stack trace:
   at System.Runtime.AsyncResult.End[TAsyncResult](IAsyncResult result)
   at System.ServiceModel.Channels.ServiceChannel.SendAsyncResult.End(SendAsyncResult result)
   at System.ServiceModel.Channels.ServiceChannel.EndCall(String action, Object[] outs, IAsyncResult result)
   at System.ServiceModel.Channels.ServiceChannel.EndRequest(IAsyncResult result)
Exception rethrown at [0]:
   at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage reqMsg, IMessage retMsg)
   at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData& msgData, Int32 type)
   at System.ServiceModel.Channels.IRequestChannel.EndRequest(IAsyncResult result)
   at Microsoft.BizTalk.Adapter.Wcf.Runtime.WcfClient`2.RequestCallback(IAsyncResult result)
MessageId: {C1FB3913-42EB-4957-9289-16D03B02674E}
InstanceID: {46C9D190-902F-48CE-86CF-D8C3C5B8944D}

Hi,
About the error System.InvalidCastException: Failed to convert parameter value from a String to a Guid
, maybe the field on the database is varchar(string type).
And you can refer to the similar discussion:
http://stackoverflow.com/questions/12816641/failed-to-convert-parameter-value-from-string-to-guid
Hope it can help you.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Technical Monitoring for Logical host name

Dear experts,
We are in mid of technical monitoring finalisation.
one of the interesting thing which i found with respect to the logical host name, we installed SMD agent on Virtual host name and our system is not with HA environment and no clustering. It is just a system with single instance.
During the managed system configuration all the physical and logical host name reported by SMD autodiscovery, all went fine. But in Technical monitoring shows only virtual host name with the updated alerts , and logical host name only shows grey alert.
virtual host shows alert here
logical host name shows grey
how can i get alert displayed for logical host name too? do i need to do some settings at the OS level , could you guide us?
Thanks
Jansi

Hi Giri Raju Ayyagari,
I am sorry, seems you are still not able to get my issue, moreover you get diverting my issue
Here the problem is not at all related to agents on fly. thats the separate topic.
We are having issue on Logical Host names where there is no HA environment, means only One logical host name created.
I raised to SAP, l will update once the update from SAP given.
Best regards
Jansi

Run MRP for production order/maintenance order has been release

Hi all,
please tell me how to configure for running mrp for production order/maintenance order has been release. as you know, i want production order has not release will not appear in MD04. I think that is the way for running mrp will not take care about this production order has not release
Thanks all

Hi Hoai,
It is impossible to exclude production order from net requirement calculation in MRP run. You may take a look at the online documentation under the PP-MRP area.
Material Requirements Planning (PP-MRP)
   Planning Process
     Net Requirements Calculation
       Net Requirements Calculation for MRP
But there is a way to temporarily exclude production order from MRP. That is you can set the 'delivery completed' indicator in 'Goods receipt' Tab in in production order. Please note that this order will not appear in MD04. Actually to some degree, this order could be considered as completed because ticking the indicator could set status 'DLV' for the order. But you still can execute confirmation, goods issue and goods receipt activities. This way is just a workaround. You may
consider it.
Or maybe you can consider the useage of BADI: MD_CHANGE_MRP_DATA to change the MRP run data to see if this could fulfill your requirement.
Regards,
Rachel

ISE MAB is not Triggered for Linux Host

Hello,
We have configured MAB for hostst that do not support 802.1x, and in general working for most of the devices. For Some linux machines however, MAB is never triggered, i.e "debug mab all" and "debug radius" commands do not produce any output for the port. "show authentication session interface" command shows the 802.1x fail over to MAB, and after it MAB process starts to run but stays in running state without finishing.
If we put another MAB host as Windows 7 or XP or Printer, it works properly passsing tthe MAB Authentication and assigned Vlan. If we put the port as to the normal "switchport mode access" and "switchport access vlan x", the device shows up in the MAC address table of the switch, and starts to work.
As additional steps we have configured "authentication mode open" and "dot1x control-direction in" inorder to trigger or start the MAB Process allowing the packets out, but the "show interface " command the input packets counter remains 0, although output packet counters seem to increase continously to 1000 and above.
The IP Addresses are static, and it is a requirement, so dhcp may trigger MAB but this is not a choice currently.
IP device tracking is enabled, but again this did not change anything
Any recommendations or workarounds for this Problem? Although seems an endpoint issue, that it never produces a single packet , there may be some
solutions to trigger MAB or learn the switch the Mac address of the Linux host, i.e. keepalive. We are also looking at the host side,
The port configuration is:
switchport access vlan 98
switchport mode access
ip access-group ACL-ALLOW in
authentication event fail action next-method
authentication event server dead action reinitialize vlan 97
authentication event server alive action reinitialize
authentication host-mode multi-auth
authentication open
authentication order dot1x mab
authentication priority dot1x mab
authentication port-control auto
authentication periodic
authentication timer reauthenticate server
authentication violation restrict
mab
dot1x pae authenticator
dot1x timeout tx-period 10
spanning-tree portfast
Thanks in Advance,
Best Regards,

Hi Ravi,
Since the linux is some kind of embedded linux, we could not get the tcp dump on the PC itself, but tried to see what is going on with a span of this port. What is interesting is that the machine does not produce even a single ethernet or IP packet and remains completely silent. (We thought dhcp would be solution but the configuration file only allows to statically assign IP address).
What we think is that somehow the machine starts to send packets after receiving a packet like Wake on LAN or arp. As you see on the port configuration the machine starts in Vlan 98, so in this Vlan it is not possible to get this packet from any other hosts on the same IP subnet since the IP of the host is Vlan 6. But in order to ISE to assign this Vlan 6 to the port with MAB, Mac Address of the host needs to be authenticated, which is not occuring because of the silence problem.
As a workaround to a similar problem, we changed the "switchport access vlan 98" to "switchport access vlan 6" and with this configuration the Mac address is learned and the host is authenticated by ISE and port is assigned to Vlan 6 dynamically which is observed on "show authentication session interface" command output. This is also not accepted because the access port configuration is required to be as standard as possible due to changing of the cabling frequently. So every MAB host should start with a PreAuthentication Vlan, and go to final Vlan after Authentication and authorizaiton with Posture checking or profiling.
As a second workaround these kind of machines are being worked on supporting dot1x, but this is a tedious process because often you need to escalate to the producer, and enhancement requests often prolong to be confirmed or denied.
Since we meet this problem also with some Printers, we think this is a problem of the TCP/IP Stack of the Operating System of the host. We are searching if there can be some mechanism to be able to make the host start conversation with a packet through a keepalive or some other protocol (or a script) that can be enabled.
Best Regards,

Documentation or guide for DB host to run SAPInst for Unicode Conversion

Similar Messages

Maybe you are looking for