Documentation problem with jdev_suite_121200_win32
I've installed jdev_suite_121200_win32
Everything is ok, but I have no code documentation while pressing Ctrl+Space on code.
"No information available" appears on Documentation tab.
Please help! ))) How can I fix it.
Ctrl-Space is 'Completion Insight' on my installation and it's missing in my installation too jdev12cx64.
Might be a bug, but as the whole documentation has changed (look & feel) there might be a property which activates the doc insight.
Timo
Similar Messages
-
Any documented problems with the 7200 over the 5400?
Are there any documented problems in MBP17s that have the 100GB 7200 over the 120GB 5400?
Not that I've heard of. I have a week 16 MBP with a BTO 7200RPM Seagate Momentus and its working just fine.
The area above the hard drive, where your left wrist sits, gets a little warm after a while but nothing serious, just a matter of getting used to it. -
Unified/Documented problems with Creative WOW Wireless/wired headsets
This thread is to properly present the problems encountered with the WOW Wireless/wired headsets. I will be linking this post to the facebook page as well as World of Warcraft's facebook and Blizzards facebook if I can find one. Also Lucas Arts and THX. Lets see if we can get some eyes on this and move forward. If you frequent a popular site where others are discussing this please bring this thread to light there also.
If it continues unrespondid to my next step will be to notify consumerist.com.
Please note I am to date not having these issues but they seem to be common enough of an issue. (I suspect we may be able to find our own solution also.)
When posting Please follow the below template.
Problem Description:
A non superlative description of your problem. Please just the facts here so we can all be very clear. Include any software tested with such as Ventrillo or WOW or games used that exhibited the problem.
Problem Impact:
Here is where we want to share how this makes you Feel. Describe the negative impact to your leisure or professional time with this product.
System:
Make/Model: (IE homegrown or Dell Optiplex xxxxx)
OS: (Operating System. Please include 64bit or 32 Bit.)
Processor: (i7920 or C2d6600 or whatever you have.)
Memory: (Amount of ram installed and running in the system.)
Video card: (What is the model of the video card in question? Memory installed on it? Manufacturer and such.)
Motherboard: (If you know the model. For instance. MSI x58M.)
Harddrives: (How many drives. What speed if you have them.)
Case: (what is the case? Normally I wouldn't ask but we are talking about Wireless transmission Who knows if that could matter right?)
Environment: (Where is the Wireless Dongle. About how far are you from it. Is something between you and the dongle normally? if so what is it? Do you plug it into the back usb port of your system behind a military grade metal desk from the 40's? That could matter.)
Troubleshooting:
This is where we describe in as much detail as you can what was done. Lets keep this to facts and try and remove feelings from this portion.
I can only hope with this information I or others can come up with a good solution for us all. Or Creative labs and their associated partners involved on this headset can drive this to a resonable conclusion for us all.
I do want to remind everyone here that we are in a new consumer technology area. There WILL be problems. Creative labs had to know this. Blizzard had to know this. And THX/Lucas Arts had to know this. How this problem is handled will impact all three of these organizations. To what extent is yet to be seen.Problem Description:
Voice randomly becomes unintelligible and extremely distorted (think 70's robotic, accept you can't understand it) while in Ventrillo. My brother and I both have the same model headphones and we BOTH have this problem.
Problem Impact:
I feel cheated out of $119.00 + tax. The main reason for these headphones is for raids and they do not perform the task they were designed for. My guildmates have to be tired of telling me and my brother " Dude your headphones screwed up again." I have sent tickets in and the solutions provided were lame. Reinstall software... mute the microphone? Seriously? All of which did nothing. By the 3rd Email I got nothing at all. Newegg has tons of complaints about this on their site and creative reponded to 1 complaint that was not about this issue, but skipped all with this problem which tells me they do not want to deal with it. I have been a LONG time customer and supporter of creative. This is making me reconsider. If I can't find a solution soon I will return them.
System:
System:
Make Model: Homebuilt
OS: Windows Vista 64 bit
Processor: Core 2 duo E8400
Memory: 8 gigs of Corsair Dominator 1600 mhz
Video Card: 2 x GeForce GTX 260
Motherboard: XFX 3-way SLI Motherboard
Hard Drives 2 300 gig Western digitals 7200rpm
Case:Thermaltake Cosmos S
Enviroment: Wired WOW headset
Troubleshooting:
So far the only make shift solution I have found to temporarily fix the problem is to disconnect and reconnect Ventrillo. The problem will definately happen again but buys a little time between distortion. The only firmaware I have found is for the wireless headset not the wired. The auto update feature says all software is current. -
Problems with RH 9, CBT, and Printed Documentation
When I upgrade an x5 project in the new RH9, all appears to go fine until I try to generate the Printed Documentation. I was disappointed that the printed documentation STILL requires so much cleanup. Text tagged with the Online condition sometimes displays on some topics, even when Online is excluded from the output. Also, some of the cleanup issues surrounding headings and index entries are still necessary.
The four biggest issues are:
1) If a "book" TOC heading also has content (a topic associated with it), a double-heading appears in the printed output. You have to manually remove all these extra headings in the cleanup process.
2) All index entries appear in the paragraph BEFORE the actual heading they mark, instead of after the heading, resulting in the Index not being correct (if a heading appears at the top of the page, the Index points to the previous page where the index entry resides, instead of the correct page). I have to manually go through the entire document and move each index entry to the paragraph AFTER the heading it marks.
3) Robohelp ignores the exclusion of Online conditions on some random topics. There is a workaround to "trick" Robohelp, but it takes *a lot* of time to do. To "trick" Robohelp, I had to generate a printed manual and make a list of all topics that "slipped" through. And, then edit each topic where the online condition was ignored, by adding an extra, empty paragraph to the end of each topic that had:
· a single paragraph of text (aside from header and footer info)
· ends with bulleted list (and no extra paragraph marker following)
· ends with a table (and no extra paragraph marker following)
· ends with a figure (and no extra paragraph marker following)
· ends with see also\How do I\misc button text (and no extra paragraph marker before the seealso/how do I listings)
4) I noticed that when I opened a topic for the first time in Robohelp, the Online condition sometimes gets applied to incorrectly tagged text (it wasn't tagged this way in the x5 content). This requires me opening each topic in the upgraded project, and checking each topic to make sure the online condition is applied correctly in each one (a very tedious process, especiallly if you have a doc set of over 1 mil words!).
Expected results:
Printed doc does not contain double headings. Index entries appear after headings. Conditional text behaves as it is supposed to behave (and if you tell Robohelp to exclude the ONLINE condition, it does it for ALL topics).
Does anyone have any suggestions/recommendations for this? Yes, I have the latest build. We held off on upgrading to previous releases of Robohelp because of the Printed Manual problem too (it seems like each version created more clean up work). :-( I logged a bug on the Adobe forum.Any and all suggestions appreciated. Thanks!Mr. Grainge,
Thank you so much for your thoughtful answers back! I appreciate you taking time out to write such a thorough reply. I hope Adobe appreciates you! You're number one in follow ups!
Unfortunately, your answers did not solve my problems. But, you did give me some ideas on where the problems could be occurring. So, thank you!! Before I begin: In answer to your question, yes I *am* using the supplied Style Mapping template (I never had luck with the custom one myself). Also, I am going to hold off on replying to 1) and 2), but I'd like to share my answer on 3) and 4), which is really just what I need to get Printed Documentation working in Robohelp 9 the same way it worked in x5.
A little history: I have a set of about 50 help projects that span many versions of our company's product, and multiple versions of Robohelp (some even go back to the 90s!). They even include some help projects that were originally in Frame/WebWorks but were later ported to Robohelp. There's a lot of history to them.
Investigating the Problem: When I opened an x5 project in RH 9, I noticed that some of the timestamps on the .htm files didn't match the rest of the files. It turned out, that these very same files that were the ones giving me problems with the Conditional text! That's when your thoughts about the mapping came to mind...As I said, my project spanned mutiple versions of Robohelp. I wondered if some of the coding on the .htm page was being parsed incorrectly on upgrade, and if if that was the reason why RH couldn't update the pages (which explain the unchanged timestamps). In other words, I wondered if Robohelp was mapping the styles correctly on import. So, I compared these unupgraded .htm files with ones that did upgrade, to see if there was something on the code page that could be causing the problem.
Solution to Fix 3) and 4) above:
I'm going to list out everything that I did below, however, not everything on this list applies to everyone. But, hopefully it will help you, if you ever run into this scenario yourself, and it might give you some ideas on how to get your HTML files working. So, before upgrading, here is what I did:
I opened my old CSS in a text editor and removed all the Robohelp autogenerated comments.
In Homesite, I did a bunch of Search and Replaces on a copy of the older x5 project. I looked for code that may have been generated in an earlier version of RH,and for unusual structures in the meta and style declaration area that could be causing conflicts. Here is a list of my search and replaces below:
Search for:
<!--(Title)=========================================================-->
Replace With:
nothing
Search for:
<!--(See Also)======================================================-->
Replace With:
nothing
Search for:
<!--(Content)=======================================================-->
Replace With:
nothing
Search for:
<p> </p>
Replace With:
nothing
Search for:
<p> </p>
Replace With:
nothing
Search for:
<html>
<head>
Replace With:
<html>
<!--(==============================================================)-->
<!--(Document created with RoboEditor. )============================-->
<!--(==============================================================)-->
<head>
Search for:
<!--(Meta)==========================================================-->
<meta http-equiv="Content-Type" content="text/html; charset=ISO-8859-1">
<!--(Links)=========================================================-->
<link href="MyHelp.css" rel="stylesheet" type="text/css">
<!--(Scripts)=======================================================-->
<script language="javaScript" type="text/javascript" src="MyHelp.js"></script>
<script language="javascript" src="eHlpDhtm.js"></script>
</head>
<!--(Body)==========================================================-->
<body TABINDEX=1>
Replace With:
<!--(Meta)==========================================================-->
<meta http-equiv=Content-Type content="text/html; charset=windows-1252">
<meta name=generator content="RoboHELP by eHelp Corporation - www.ehelp.com">
<meta name=generator-major-version content=0.1>
<meta name=generator-minor-version content=1>
<meta name=filetype content=kadov>
<meta name=filetype-version content=1>
<meta name=page-count content=1>
<meta name=layout-height content=597>
<meta name=layout-width content=662>
<!--(Links)=========================================================-->
<link href="MyHelp.css" rel="stylesheet" type="text/css">
<!--(Scripts)=======================================================-->
<script language=javaScript
type="text/javascript"
src="MyHelp.js"></script>
<script language=javascript
src="eHlpDhtm.js"></script>
</head>
<!--(Body)==========================================================-->
<body TABINDEX=1>
Search for:
<a class=toplinks href="#top"> Top</a>
…or…
<a class=toplinks href="#top">Top</a>
Replace With:
<a class=toplinks
href="#top">Top</a>
Search for:
<h3 id=SeeAlsoTitle
class=SeeAlsoTitle
style="x-condition: Online;">See Also</h3>
<div id=seeAlso
Replace With:
<h3 id=SeeAlsoTitle
class=SeeAlsoTitle
style="x-condition: Online;">See Also</h3>
<div id=seeAlso
After I did these all these search and replaces in the copy of the x5 version of the project, I opened the project again in RH 9 and upgraded it. After the upgrade, I checked the timestamps on the .htm files to make sure they all changed. They did! It worked! Everything upgraded properly this time... I tested the Printed Manual output and no conditional text slipped through this time. Yay!
In Summary:
This is what I learned if you are having problems with Conditional text and Printed Manuals in an upgraded RH project:
Always make backups of your older projects before you upgrade anything. I know this is elementary, but I thought it was worth reminding.
Check the timestamps of the files after you upgrade the project. If there are a group of files with timestamps that aren't similar to the rest of the files, chances are Robohelp was having trouble converting those files.
Try looking at the HTML code in those files and see if anything looks out of the ordinary. Some examples are above.
If you have already ported the RH project and it's too late to go back, go look at the file timestamps anyhow. For all the older files, try opening each one in Robohelp and add a space or something (to force RH to change it), and save it. I didn't have the time to verify this, but it seemed on most instances: when I forced RH to save the file manually, it updated correctly and the problem with the conditional text went away. (This option takes longer, especially if you have to do each page individually, but it's worth a try, IMHO.)
Aside from the initial Printed Manual woes, which are resolved, the upgrade process from RH 9 really was seamless! Best I have ever seen! Everything just works! Awesome is a word that comes to mind.
Printed Documentation output does work on upgrade, but in my opinion is: it is no better than it was before, in previous versions.
I wish there were more fixes to the Printed Manual output. When you have a product help system that spans multiple versions, contains over 2.5 million words, and 10,000+ topics, having a lot of cleanup on the production end is costly. What use to take a person on my team less than a day to generate 50+ PDFs in FrameMaker, takes 4-5 weeks man-time in RH. I will outline my opinions in my next reply to this thread.
Thanks again, Mr. Grainge! -
Problem with RoboHelp 7 and Batch Generate "Printed Documentation"
Hello people! I have a problem with Batch Generate of Word documenttion in RoboHelp 7, when launch the Batch Generate with "Printed Documention" option selected send me a error message like this "Adobe Acrobat or Adobe Elments version 7 or Higher is not installed on your system".
RoboHelp generate de .chm file without problems.
I have the last version of Adobe Acrobat Reader Installed in my computer, my RoboHelp's project is not very complicated, the only to remarks is in spanish lenguage and the computer is in spanish too, but anothers projects in english US generate documentation without problems, I dont know if this had anything to do..
I have windows XP SP 3,so I test in another computer to generate documentation and I have the same problem. What´s happend ??
Thank you for all.I too am having this issue with the TOC. Firefox simply
doesn't handle it correctly and I have no idea how to fix
it. -
I have a problem with my ipad. Before I can make online documentation but when I updated my iOS, I can no longer make notes. How can I fix this?
What does "online documentation" mean exactly? Are you using the Notes app to try to create notes in iCloud, for example?
If so, that should still work in iOS 7.1.
If not, please tell us specific symptoms of what is (or is not) happening. -
Studio 12.1 Performace Analyzer 7.7 problem, with 'er_print' utility.
I am having a minor but nagging problem with a regression in the er_print utility of the Sun Performance Analyzer suite bundled in Studio 12. is there maybe a patch available or in the works?
I have not had any success in finding a resolution by searching the open literature
The issue is that the callers-callees listing only dumps functions in alphabetical order, ignoring the sort order specified by sort. This is a regression from the Performance Analyzer (7.4) behavior from Sun Studio 10. We only recently jumped to studio 12.1.
This functionality is documented here: http://docs.sun.com/app/docs/doc/821-0304/afaid?a=view (as well as many other references). To quote:
callers-callees
Print the callers-callees panel for each of the functions, in the order specified by the function sort metric (sort)."
I use a script input to er_print that in the past analyzed the top N functions sorted on inclusive thread time. Now I have to be sure to dump ALL functions and need a third-party search tool to find that information in the resulting report.
Has anyone heard of this problem or are there Performance Analyzer patch(es) available. I saw some for 7.6 and another for unspecified but have not seen this problem in patch notices.
Thanks.
Regards,
SteveNik, thanks for taking a look. We can't go to 12.2 because we're a software developer and we'll lose our binary compatibility with the release we've been building for the last few months. I'm a systems guy and will paste in a developer's example below.
Note Marc's url shows a 12.1 Performance Analyzer patch 142369-01 we have not yet installed. The patch notice description doesn't show much. I'll pass on patch info to remote user/developer.
Developer example:
I use a script input to er_print that in the past analyzed the top N functions sorted on inclusive thread time. Now I have to be sure to dump ALL functions and need a third-party search tool to find that information in the resulting report.
Heres a shortened (only 4) example of the behavior Im seeing the focus of the functions in callers-callees are NOT those of the functions determined by the sort metric.
= = = =
sysun046% er_print /scratch/test.4.er
/scratch/test.4.er: Experiment has warnings, see header for details
(/opt/sunstudio12.1/bin/../prod/bin/sparcv9/er_print) sort i.total
Current Sort Metric: Inclusive Total Thread Time ( i.total )
(/opt/sunstudio12.1/bin/../prod/bin/sparcv9/er_print) cmetrics a.total:e.user:i.user:e.total:i.total
Current caller-callee metrics: a.total:e.user:i.user:e.total:i.total:name
Current caller-callee sort metric: Attributed Total Thread Time ( a.total )
(/opt/sunstudio12.1/bin/../prod/bin/sparcv9/er_print) limit 4
(/opt/sunstudio12.1/bin/../prod/bin/sparcv9/er_print) sample_select 22-53
Exp Sel Total
=== ===== =====
1 22-53 57
(/opt/sunstudio12.1/bin/../prod/bin/sparcv9/er_print) functions
Functions sorted by metric: Inclusive Total Thread Time
Excl. Incl. Incl. Total Name
User CPU User CPU Thread
sec. sec. sec.
26.015 26.015 113.530 <Total>
0. 26.015 113.530 ACE_Task_Base::svc_run(void*)
0. 26.015 113.530 ACE_Thread_Adapter::invoke()
0. 26.015 113.530 ORB_Task::svc()
(/opt/sunstudio12.1/bin/../prod/bin/sparcv9/er_print) callers-callees
Functions sorted by metric: Inclusive Total Thread Time
Callers and callees sorted by metric: Attributed Total Thread Time
Attr. Total Excl. Incl. Excl. Total Incl. Total Name
Thread User CPU User CPU Thread Thread
sec. sec. sec. sec. sec.
113.530 26.015 26.015 113.530 113.530 *<Total>
113.530 0. 26.015 0. 113.530 lwpstart
Attr. Total Excl. Incl. Excl. Total Incl. Total Name
Thread User CPU User CPU Thread Thread
sec. sec. sec. sec. sec.
0.010 0. 0.010 0. 0.010 ACE_Message_Block::clone(unsigned long)const
0. 0. 0.010 0. 0.010 *ACE_Data_Block::clone(unsigned long)const
0.010 0.398 0.398 0.398 0.398 memcpy
Attr. Total Excl. Incl. Excl. Total Incl. Total Name
Thread User CPU User CPU Thread Thread
sec. sec. sec. sec. sec.
0.001 0. 0.003 0. 0.011 ACE_Select_Reactor_T<ACE_Select_Reactor_Token_T<ACE_Token> >::resume_handler(int)
0.001 0.001 0.001 0.001 0.001 *ACE_Guard<ACE_Select_Reactor_Token_T<ACE_Token> >::release()
Attr. Total Excl. Incl. Excl. Total Incl. Total Name
Thread User CPU User CPU Thread Thread
sec. sec. sec. sec. sec.
0.010 0. 0.010 0. 0.010 TAO_Synch_Queued_Message::clone(ACE_Allocator*)
0. 0. 0.010 0. 0.010 *ACE_Message_Block::clone(unsigned long)const
0.010 0. 0.010 0. 0.010 ACE_Data_Block::clone(unsigned long)const
= = = = =
Nik, thanks for taking a look.
Steve -
Steps to troubleshoot and get past common problems with Audition
When you encounter a problem with Audition, the following steps are often useful for getting past the problem and/or determining the cause of the problem:
1. Hold down SHIFT while you launch Audition
This overrides the preference files and launches Audition using the default settings.
2. Manually rename or delete the preferences folder
Step 1 only overrides certain preference files, while others such as Workspace preference files, may be the cause of the problem. Depending on your OS, locate the "5.0" folder in the location below and rename it or delete it.
Windows XP: C:\Document and Settings\<username>\Application Data\Adobe\Audition\5.0\
Windows Vista/7: C:\Users\<username>\AppData\Roaming\Adobe\Audition\5.0\ *
Mac OS X: ~\Library\Preferences\Adobe\Audition\5.0\ **
* "AppData" may be a hidden folder. You can type it into the location bar, or enable "Show Hidden Files" in Windows.
** This is your user-level Library folder, not the system-level tree.
3. Check your Audition Log.txt file
To enable a log file with CS 5.5, you must create an empty file in your preferences folder called "Audition Log.txt" using notepad, text edit, or any other editor. After you create this file, launch Audition and if it fails, open and/or share the log file for more specific information about what's happening.
4. Check the Operating System console or error log
Both OS X and Windows can track application errors, and if the problem is occurring outside of the application code - a driver conflict, for example - then the OS error report may be more informative than what we can get from the application.
OS X: launch /Applications/Utilities/Console.app Clear the view, then launch Audition and note any error messages that appear.
Windows: launch Control Panel > Administrative Tools > Event Viewer > Windows Logs > Application then launch Audition and note any error messages that appear.
5. Re-install Audition
If at this point, nothing has resolved the issue or the error logs are inconclusive, it's a good time to uninstall Audition, reboot, and reinstall Audition.
6. Obtain the full crash dump and send it to the Adobe team
So you've walked through all the above steps, you've disconnected any external hardware interfaces to rule out any device or driver conflicts, and you've exhausted the basic troubleshooting steps. Visit http://forums.adobe.com/thread/900619 and follow the steps for your OS that Charles has documented to best obtain a full crash memory dump for Audition, and send that to [email protected] with a description of the problem and the steps you've taken, and we'll take a look.Firstly yes these are common problems and secondly hopefully they will be fixed with updated software 2.1 which is due for release this coming Firday!
-
Hyperion planning installation(Problem with application server deployment)
Hi There:
I am new to hyperion planning.I am trying to install planning.I got problem with Hyperion Configuration utility while configuring application server deployment.Its show message failed.Please guide me how to fix this.If it is possible can you please send me any personal documentation on installation.I am trying this for past 4 day's.Below is the error its showing in configtool
... 10 more
(Mar 09, 2008, 08:26:04 PM), com.hyperion.cis.config.wizard.ProductTaskSelectionPanel, INFO, Validating dependencies...
(Mar 09, 2008, 08:26:04 PM), com.hyperion.cis.config.wizard.ProductTaskSelectionPanel$5, DEBUG, Product: Planning; Dependencies: []
(Mar 09, 2008, 08:26:04 PM), com.hyperion.cis.config.wizard.ProductTaskSelectionPanel, DEBUG, task to execute: HspDBPropertyLocation
(Mar 09, 2008, 08:26:04 PM), com.hyperion.cis.config.wizard.ProductTaskSelectionPanel, DEBUG, task to execute: applicationServerDeployment
(Mar 09, 2008, 08:26:04 PM), com.hyperion.cis.config.wizard.PanelEventDispatcher, DEBUG, constructor
(Mar 09, 2008, 08:26:04 PM), com.hyperion.cis.config.wizard.AppServerSelectionPanel, INFO, AppServerSelectionPanel in queryEnter
(Mar 09, 2008, 08:26:04 PM), com.hyperion.cis.config.wizard.AppServerSelectionPanel, INFO, Server: WebLogic 8.1; deployment type = both
(Mar 09, 2008, 08:26:04 PM), com.hyperion.cis.config.wizard.AppServerSelectionPanel, INFO, Server: WebSphere 5.1; deployment type = both
(Mar 09, 2008, 08:26:04 PM), com.hyperion.cis.config.wizard.AppServerSelectionPanel, INFO, Server: Tomcat 5.0.28; deployment type = both
(Mar 09, 2008, 08:26:08 PM), com.hyperion.cis.config.wizard.AppServerSelectionPanel, INFO, AppServerSelectionPanel in queryExit
(Mar 09, 2008, 08:26:08 PM), com.hyperion.cis.config.wizard.AppServerSelectionPanel, DEBUG, AppServer selected: WebLogic 8.1
(Mar 09, 2008, 08:26:08 PM), com.hyperion.cis.config.wizard.ProductCustomInputPanel, ERROR, Error:
java.lang.NullPointerException
at com.hyperion.cis.config.wizard.ProductCustomInputPanel.queryEnter(ProductCustomInputPanel.java:88)
at com.installshield.wizard.awt.AWTWizardUI.currentBeanChanged(Unknown Source)
at com.installshield.wizard.swing.SwingWizardUI.currentBeanChanged(Unknown Source)
at com.installshield.wizard.StandardWizardListener.currentBeanChanged(Unknown Source)
at com.installshield.wizard.Wizard$RunThread.run(Unknown Source)
(Mar 09, 2008, 08:26:09 PM), com.hyperion.cis.config.AppServerDeployer, DEBUG, Starting WebLogic 8.1 deployment...
(Mar 09, 2008, 08:26:09 PM), com.hyperion.cis.config.AppServerDeployer, DEBUG, pre-Deploy: Planning
(Mar 09, 2008, 08:26:09 PM), com.hyperion.cis.config.AppServerDeployer, DEBUG, Deploy: Planning
(Mar 09, 2008, 08:26:09 PM), com.hyperion.cis.config.wizard.RunAllTasksWizardAction, ERROR, Error:
java.lang.NullPointerException
at com.hyperion.cis.config.AppServerDeployer.initContexts(AppServerDeployer.java:628)
at com.hyperion.cis.config.AppServerDeployer.deploy(AppServerDeployer.java:548)
at com.hyperion.cis.config.AppServerDeployer.deploy(AppServerDeployer.java:526)
at com.hyperion.cis.config.wizard.RunAllTasksWizardAction.executeDeployerTask(RunAllTasksWizardAction.java:251)
at com.hyperion.cis.config.wizard.RunAllTasksWizardAction.execute(RunAllTasksWizardAction.java:156)
at com.installshield.wizard.RunnableWizardBeanContext.run(Unknown Source)
(Mar 09, 2008, 08:26:13 PM), com.hyperion.cis.config.wizard.CustomSummaryPanel, DEBUG, CustomSummaryPanel in queryExit
Please help me.Email id:[email protected]
Thanks
Harsha.
Message was edited by:
user603943I think the installation of planning on Vista is difficult. As some of the files doesn't support even i am tired of doing that.
But tell me one thing have you installed all other products , I mean Essbase, (server, client) , AAS and Shared services.
Are they working good .
I have formatted my system to XP and installed everything , but the problem is when i install planning it prompts me that IIS 5 should be greater other wise EPM will not install...
there are lot of things with planning 1) i can't datasource as it is not highlighting when we configure with Shared services
2) It does not create product instance .
If any one can fix this thing by giving me a suggestions.
Advance Thanks -
Problem with htmldb 2 (Sorry APEX)!
I installed htmldb 2 on a windows XP, Oracle 10gR1 (which has enhanced by companion CD downloaded form Oracle's site). Everything went OK but when I want to connect to it by this url: http://localhost:7777/pls/htmldb it takes my username,pass but says:
"Service Temporarily Unavailable
The server is temporarily unable to service your request due to maintenance downtime or capacity problems. Please try again later.
Oracle-HTTP-Server/1.3.28 Server at localhost Port 7777"
I noticed many differences between my installed Apache and documents of htmldb. I run a 9.0.4.0.0 Apache server and the dads.conf and httpd.conf are as following:
# ============================================================================
# mod_plsql DAD Configuration File
# ============================================================================
# 1. Please refer to dads.README for a description of this file
# ============================================================================
# Note: This file should typically be included in your plsql.conf file with
# the "include" directive.
# Hint: You can look at some sample DADs in the dads.README file
# ============================================================================
Alias /i/ "E:\oracle\product\10.1.0\Companion\Apache\Apache\images/"
<Location /pls/htmldb>
SetHandler pls_handler
Order deny,allow
Allow from all
AllowOverride None
PlsqlDatabaseUsername HTMLDB_PUBLIC_USER
PlsqlDatabasePassword @BI+fAonVS+7xU8G04irVINWznM6s+A9fuQ==
PlsqlDatabaseConnectString chagh
PlsqlDefaultPage htmldb
PlsqlDocumentTablename wwv_flow_file_objects$
PlsqlDocumentPath docs
PlsqlDocumentProcedure wwv_flow_file_mgr.process_download
PlsqlAuthenticationMode Basic
PlsqlNLSLanguage AMERICAN_AMERICA.AL32UTF8
</Location>
# Based upon the NCSA server configuration files originally by Rob McCool.
# This is the main Apache server configuration file. It contains the
# configuration directives that give the server its instructions.
# See <URL:http://www.apache.org/docs/> for detailed information about
# the directives.
# Do NOT simply read the instructions in here without understanding
# what they do. They're here only as hints or reminders. If you are unsure
# consult the online docs. You have been warned.
# After this file is processed, the server will look for and process
# E:\oracle\product\10.1.0\Companion\Apache\Apache/conf/srm.conf and then E:\oracle\product\10.1.0\Companion\Apache\Apache/conf/access.conf
# unless you have overridden these with ResourceConfig and/or
# AccessConfig directives here.
# The configuration directives are grouped into three basic sections:
# 1. Directives that control the operation of the Apache server process as a
# whole (the 'global environment').
# 2. Directives that define the parameters of the 'main' or 'default' server,
# which responds to requests that aren't handled by a virtual host.
# These directives also provide default values for the settings
# of all virtual hosts.
# 3. Settings for virtual hosts, which allow Web requests to be sent to
# different IP addresses or hostnames and have them handled by the
# same Apache server process.
# Configuration and logfile names: If the filenames you specify for many
# of the server's control files begin with "/" (or "drive:/" for Win32), the
# server will use that explicit path. If the filenames do not begin
# with "/", the value of ServerRoot is prepended -- so "logs/foo.log"
# with ServerRoot set to "E:\oracle\product\10.1.0\Companion\Apache\Apache" will be interpreted by the
# server as "E:\oracle\product\10.1.0\Companion\Apache\Apache/logs/foo.log".
# NOTE: Where filenames are specified, you must use forward slashes
# instead of backslashes (e.g., "c:/apache" instead of "c:\apache").
# If a drive letter is omitted, the drive on which Apache.exe is located
# will be used by default. It is recommended that you always supply
# an explicit drive letter in absolute paths, however, to avoid
# confusion.
### Section 1: Global Environment
# The directives in this section affect the overall operation of Apache,
# such as the number of concurrent requests it can handle or where it
# can find its configuration files.
# ServerType is either inetd, or standalone. Inetd mode is only supported on
# Unix platforms.
ServerType standalone
# ServerRoot: The top of the directory tree under which the server's
# configuration, error, and log files are kept.
# Do NOT add a slash at the end of the directory path.
ServerRoot "E:\oracle\product\10.1.0\Companion\Apache\Apache"
# PidFile: The file in which the server should record its process
# identification number when it starts.
PidFile logs/httpd.pid
# ScoreBoardFile: File used to store internal server process information.
# Not all architectures require this. But if yours does (you'll know because
# this file will be created when you run Apache) then you must ensure that
# no two invocations of Apache share the same scoreboard file.
ScoreBoardFile logs/httpd.scoreboard
# In the standard configuration, the server will process httpd.conf (this
# file, specified by the -f command line option), srm.conf, and access.conf
# in that order. The latter two files are now distributed empty, as it is
# recommended that all directives be kept in a single file for simplicity.
# The commented-out values below are the built-in defaults. You can have the
# server ignore these files altogether by using "/dev/null" (for Unix) or
# "nul" (for Win32) for the arguments to the directives.
#ResourceConfig conf/srm.conf
#AccessConfig conf/access.conf
# Timeout: The number of seconds before receives and sends time out.
Timeout 300
# SendBufferSize: controls setsockopt() call made to set send buffer size on
# all sockets. Default OS value on most Windows platforms is too small.
# Larger values can help if the average page size served by OHS is
# large (~64 k)
SendBufferSize 16384
# KeepAlive: Whether or not to allow persistent connections (more than
# one request per connection). Set to "Off" to deactivate.
KeepAlive On
# MaxKeepAliveRequests: The maximum number of requests to allow
# during a persistent connection. Set to 0 to allow an unlimited amount.
# We recommend you leave this number high, for maximum performance.
MaxKeepAliveRequests 100
# KeepAliveTimeout: Number of seconds to wait for the next request from the
# same client on the same connection.
KeepAliveTimeout 15
# Apache on Win32 always creates one child process to handle requests. If it
# dies, another child process is created automatically. Within the child
# process multiple threads handle incoming requests. The next two
# directives control the behaviour of the threads and processes.
# MaxRequestsPerChild: the number of requests each child process is
# allowed to process before the child dies. The child will exit so
# as to avoid problems after prolonged use when Apache (and maybe the
# libraries it uses) leak memory or other resources. On most systems, this
# isn't really needed, but a few (such as Solaris) do have notable leaks
# in the libraries. For Win32, set this value to zero (unlimited)
# unless advised otherwise.
# NOTE: This value does not include keepalive requests after the initial
# request per connection. For example, if a child process handles
# an initial request and 10 subsequent "keptalive" requests, it
# would only count as 1 request towards this limit.
MaxRequestsPerChild 0
# Number of concurrent threads (i.e., requests) the server will allow.
# Set this value according to the responsiveness of the server (more
# requests active at once means they're all handled more slowly) and
# the amount of system resources you'll allow the server to consume.
ThreadsPerChild 50
# Server-pool size regulation. Rather than making you guess how many
# server processes you need, Apache dynamically adapts to the load it
# sees --- that is, it tries to maintain enough server processes to
# handle the current load, plus a few spare servers to handle transient
# load spikes (e.g., multiple simultaneous requests from a single
# Netscape browser).
# It does this by periodically checking how many servers are waiting
# for a request. If there are fewer than MinSpareServers, it creates
# a new spare. If there are more than MaxSpareServers, some of the
# spares die off. The default values are probably OK for most sites.
#MinSpareServers 5
#MaxSpareServers 20
# Limit on total number of servers running, i.e., limit on the number
# of clients who can simultaneously connect --- if this limit is ever
# reached, clients will be LOCKED OUT, so it should NOT BE SET TOO LOW.
# It is intended mainly as a brake to keep a runaway server from taking
# the system with it as it spirals down...
#MaxClients 150
# Listen: Allows you to bind Apache to specific IP addresses and/or
# ports, in addition to the default. See also the <VirtualHost>
# directive.
#Listen 3000
#Listen 12.34.56.78:80
# BindAddress: You can support virtual hosts with this option. This directive
# is used to tell the server which IP address to listen to. It can either
# contain "*", an IP address, or a fully qualified Internet domain name.
# See also the <VirtualHost> and Listen directives.
#BindAddress *
# Dynamic Shared Object (DSO) Support
# To be able to use the functionality of a module which was built as a DSO you
# have to place corresponding `LoadModule' lines at this location so the
# directives contained in it are actually available before they are used.
# Please read the file README.DSO in the Apache 1.3 distribution for more
# details about the DSO mechanism and run `apache -l' for the list of already
# built-in (statically linked and thus always available) modules in your Apache
# binary.
# Note: The order in which modules are loaded is important. Don't change
# the order below without expert advice.
# Example:
# LoadModule foo_module libexec/mod_foo.dll
LoadModule mime_magic_module modules/ApacheModuleMimeMagic.dll
LoadModule mime_module modules/ApacheModuleMime.dll
LoadModule dbm_auth_module modules/ApacheModuleAuthDBM.dll
LoadModule digest_auth_module modules/ApacheModuleAuthDigest.dll
LoadModule anon_auth_module modules/ApacheModuleAuthAnon.dll
LoadModule cern_meta_module modules/ApacheModuleCERNMeta.dll
LoadModule digest_module modules/ApacheModuleDigest.dll
LoadModule expires_module modules/ApacheModuleExpires.dll
LoadModule headers_module modules/ApacheModuleHeaders.dll
LoadModule proxy_module modules/ApacheModuleProxy.dll
LoadModule speling_module modules/ApacheModuleSpeling.dll
LoadModule status_module modules/ApacheModuleStatus.dll
LoadModule info_module modules/ApacheModuleInfo.dll
LoadModule usertrack_module modules/ApacheModuleUserTrack.dll
LoadModule vhost_alias_module modules/ApacheModuleVhostAlias.dll
LoadModule agent_log_module modules/ApacheModuleLogAgent.dll
LoadModule referer_log_module modules/ApacheModuleLogReferer.dll
LoadModule perl_module modules/ApacheModulePerl.DLL
LoadModule fastcgi_module modules/ApacheModuleFastCGI.dll
LoadModule onsint_module modules/ApacheModuleOnsint.dll
LoadModule wchandshake_module modules/ApacheModuleWchandshake.dll
ClearModuleList
AddModule mod_so.c
AddModule mod_onsint.c
AddModule mod_mime_magic.c
AddModule mod_mime.c
AddModule mod_access.c
AddModule mod_auth.c
AddModule mod_negotiation.c
AddModule mod_include.c
AddModule mod_autoindex.c
AddModule mod_dir.c
AddModule mod_cgi.c
AddModule mod_userdir.c
AddModule mod_alias.c
AddModule mod_env.c
AddModule mod_log_config.c
AddModule mod_asis.c
AddModule mod_imap.c
AddModule mod_actions.c
AddModule mod_setenvif.c
AddModule mod_isapi.c
AddModule mod_vhost_alias.c
AddModule mod_log_referer.c
AddModule mod_log_agent.c
AddModule mod_auth_anon.c
AddModule mod_auth_dbm.c
AddModule mod_auth_digest.c
AddModule mod_cern_meta.c
AddModule mod_digest.c
AddModule mod_expires.c
AddModule mod_headers.c
AddModule mod_proxy.c
AddModule mod_speling.c
AddModule mod_info.c
AddModule mod_status.c
AddModule mod_usertrack.c
AddModule mod_perl.c
AddModule mod_fastcgi.c
AddModule mod_wchandshake.c
<IfDefine SSL>
LoadModule ossl_module modules/ApacheModuleOSSL.DLL
</IfDefine>
# ExtendedStatus controls whether Apache will generate "full" status
# information (ExtendedStatus On) or just basic information (ExtendedStatus
# Off) when the "server-status" handler is called. The default is Off.
ExtendedStatus On
### Section 2: 'Main' server configuration
# The directives in this section set up the values used by the 'main'
# server, which responds to any requests that aren't handled by a
# <VirtualHost> definition. These values also provide defaults for
# any <VirtualHost> containers you may define later in the file.
# All of these directives may appear inside <VirtualHost> containers,
# in which case these default settings will be overridden for the
# virtual host being defined.
# Port: The port to which the standalone server listens. Certain firewall
# products must be configured before Apache can listen to a specific port.
# Other running httpd servers will also interfere with this port. Disable
# all firewall, security, and other services if you encounter problems.
# To help diagnose problems use the Windows NT command NETSTAT -a
Port 7777
Listen 7777
# ServerAdmin: Your address, where problems with the server should be
# e-mailed. This address appears on some server-generated pages, such
# as error documents.
ServerAdmin [email protected]
# ServerName allows you to set a host name which is sent back to clients for
# your server if it's different than the one the program would get (i.e., use
# "www" instead of the host's real name).
# Note: You cannot just invent host names and hope they work. The name you
# define here must be a valid DNS name for your host. If you don't understand
# this, ask your network administrator.
# If your host doesn't have a registered DNS name, enter its IP address here.
# You will have to access it by its address (e.g., http://123.45.67.89/)
# anyway, and this will make redirections work in a sensible way.
# 127.0.0.1 is the TCP/IP local loop-back address, often named localhost. Your
# machine always knows itself by this address. If you use Apache strictly for
# local testing and development, you may use 127.0.0.1 as the server name.
ServerName localhost
# DocumentRoot: The directory out of which you will serve your
# documents. By default, all requests are taken from this directory, but
# symbolic links and aliases may be used to point to other locations.
DocumentRoot "E:\oracle\product\10.1.0\Companion\Apache\Apache\htdocs"
# Each directory to which Apache has access, can be configured with respect
# to which services and features are allowed and/or disabled in that
# directory (and its subdirectories).
# First, we configure the "default" to be a very restrictive set of
# permissions.
<Directory />
Options FollowSymLinks
AllowOverride None
</Directory>
# Note that from this point forward you must specifically allow
# particular features to be enabled - so if something's not working as
# you might expect, make sure that you have specifically enabled it
# below.
# This should be changed to whatever you set DocumentRoot to.
<Directory "E:\oracle\product\10.1.0\Companion\Apache\Apache\htdocs">
# This may also be "None", "All", or any combination of "Indexes",
# "Includes", "FollowSymLinks", "ExecCGI", or "MultiViews".
# Note that "MultiViews" must be named explicitly --- "Options All"
# doesn't give it to you.
Options Indexes FollowSymLinks MultiViews
# This controls which options the .htaccess files in directories can
# override. Can also be "All", or any combination of "Options", "FileInfo",
# "AuthConfig", and "Limit"
AllowOverride None
# Controls who can get stuff from this server.
Order allow,deny
Allow from all
</Directory>
# UserDir: The name of the directory which is appended onto a user's home
# directory if a ~user request is received.
# Under Win32, we do not currently try to determine the home directory of
# a Windows login, so a format such as that below needs to be used. See
# the UserDir documentation for details.
<IfModule mod_userdir.c>
UserDir "E:\oracle\product\10.1.0\Companion\Apache\Apache\users\"
</IfModule>
# Control access to UserDir directories. The following is an example
# for a site where these directories are restricted to read-only.
#<Directory /home/*/public_html>
# AllowOverride FileInfo AuthConfig Limit
# Options MultiViews Indexes SymLinksIfOwnerMatch IncludesNoExec
# <Limit GET POST OPTIONS PROPFIND>
# Order allow,deny
# Allow from all
# </Limit>
# <LimitExcept GET POST OPTIONS PROPFIND>
# Order deny,allow
# Deny from all
# </LimitExcept>
#</Directory>
# DirectoryIndex: Name of the file or files to use as a pre-written HTML
# directory index. Separate multiple entries with spaces.
<IfModule mod_dir.c>
DirectoryIndex index.html
</IfModule>
# AccessFileName: The name of the file to look for in each directory
# for access control information.
AccessFileName .htaccess
# The following lines prevent .htaccess files from being viewed by
# Web clients. Since .htaccess files often contain authorization
# information, access is disallowed for security reasons. Comment
# these lines out if you want Web visitors to see the contents of
# .htaccess files. If you change the AccessFileName directive above,
# be sure to make the corresponding changes here.
# Also, folks tend to use names such as .htpasswd for password
# files, so this will protect those as well.
<Files ~ "^\.ht">
Order allow,deny
Deny from all
</Files>
# CacheNegotiatedDocs: By default, Apache sends "Pragma: no-cache" with each
# document that was negotiated on the basis of content. This asks proxy
# servers not to cache the document. Uncommenting the following line disables
# this behavior, and proxies will be allowed to cache the documents.
#CacheNegotiatedDocs
# UseCanonicalName: (new for 1.3) With this setting turned on, whenever
# Apache needs to construct a self-referencing URL (a URL that refers back
# to the server the response is coming from) it will use ServerName and
# Port to form a "canonical" name. With this setting off, Apache will
# use the hostname:port that the client supplied, when possible. This
# also affects SERVER_NAME and SERVER_PORT in CGI scripts.
UseCanonicalName On
# TypesConfig describes where the mime.types file (or equivalent) is
# to be found.
<IfModule mod_mime.c>
TypesConfig conf/mime.types
</IfModule>
# DefaultType is the default MIME type the server will use for a document
# if it cannot otherwise determine one, such as from filename extensions.
# If your server contains mostly text or HTML documents, "text/plain" is
# a good value. If most of your content is binary, such as applications
# or images, you may want to use "application/octet-stream" instead to
# keep browsers from trying to display binary files as though they are
# text.
DefaultType text/plain
# The mod_mime_magic module allows the server to use various hints from the
# contents of the file itself to determine its type. The MIMEMagicFile
# directive tells the module where the hint definitions are located.
# mod_mime_magic is not part of the default server (you have to add
# it yourself with a LoadModule [see the DSO paragraph in the 'Global
# Environment' section], or recompile the server and include mod_mime_magic
# as part of the configuration), so it's enclosed in an <IfModule> container.
# This means that the MIMEMagicFile directive will only be processed if the
# module is part of the server.
<IfModule mod_mime_magic.c>
MIMEMagicFile conf/magic
</IfModule>
# HostnameLookups: Log the names of clients or just their IP addresses
# e.g., www.apache.org (on) or 204.62.129.132 (off).
# The default is off because it'd be overall better for the net if people
# had to knowingly turn this feature on, since enabling it means that
# each client request will result in AT LEAST one lookup request to the
# nameserver.
HostnameLookups Off
# ErrorLog: The location of the error log file.
# If you do not specify an ErrorLog directive within a <VirtualHost>
# container, error messages relating to that virtual host will be
# logged here. If you do define an error logfile for a <VirtualHost>
# container, that host's errors will be logged there and not here.
ErrorLog "|E:\oracle\product\10.1.0\Companion\Apache\Apache\bin\rotatelogs logs/error_log 43200"
# LogLevel: Control the number of messages logged to the error.log.
# Possible values include: debug, info, notice, warn, error, crit,
# alert, emerg.
LogLevel warn
# The following directives define some format nicknames for use with
# a CustomLog directive (see below).
# Alternate "common" format to use when fronted by webcache:
# LogFormat "%{ClientIP}i %l %u %t \"%r\" %>s %b %h" common_webcache
# When webcache is forwarding requests to OHS, %h becomes the IP of
# the originating webcache server and the real client IP is stored
# in the ClientIP header. The common_webcache format can be used
# in place of the common format when using webcache but with one
# important caveat: if clients are capable of bypassing webcache
# then it is possible to spoof the client IP by manually setting
# the ClientIP header so the %h field should be monitored in such
# an environment. Another alternative to specifying the ClientIP
# header directly in a LogFormat is to use the "UseWebCacheIp"
# directive:
# UseWebCacheIp On
# When this is specified, %h is derived internally from the ClientIP
# header and the access log format does not need to be modified.
LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined
LogFormat "%h %l %u %t \"%r\" %>s %b" common
LogFormat "%{Referer}i -> %U" referer
LogFormat "%{User-agent}i" agent
# The location and format of the access logfile (Common Logfile Format).
# If you do not define any access logfiles within a <VirtualHost>
# container, they will be logged here. Contrariwise, if you do
# define per-<VirtualHost> access logfiles, transactions will be
# logged therein and not in this file.
CustomLog "|E:\oracle\product\10.1.0\Companion\Apache\Apache\bin\rotatelogs logs/access_log 43200" common
# If you would like to have agent and referer logfiles, uncomment the
# following directives.
#CustomLog logs/referer.log referer
#CustomLog logs/agent.log agent
# If you prefer a single logfile with access, agent, and referer information
# (Combined Logfile Format) you can use the following directive.
#CustomLog logs/access.log combined
# Optionally add a line containing the server version and virtual host
# name to server-generated pages (error documents, FTP directory listings,
# mod_status and mod_info output etc., but not CGI generated documents).
# Set to "EMail" to also include a mailto: link to the ServerAdmin.
# Set to one of: On | Off | EMail
ServerSignature On
# Apache parses all CGI scripts for the shebang line by default.
# This comment line, the first line of the script, consists of the symbols
# pound (#) and exclamation (!) followed by the path of the program that
# can execute this specific script. For a perl script, with perl.exe in
# the C:\Program Files\Perl directory, the shebang line should be:
#!c:/program files/perl/perl
# Note you mustnot_ indent the actual shebang line, and it must be the
# first line of the file. Of course, CGI processing must be enabled by
# the appropriate ScriptAlias or Options ExecCGI directives for the files
# or directory in question.
# However, Apache on Windows allows either the Unix behavior above, or can
# use the Registry to match files by extention. The command to execute
# a file of this type is retrieved from the registry by the same method as
# the Windows Explorer would use to handle double-clicking on a file.
# These script actions can be configured from the Windows Explorer View menu,
# 'Folder Options', and reviewing the 'File Types' tab. Clicking the Edit
# button allows you to modify the Actions, of which Apache 1.3 attempts to
# perform the 'Open' Action, and failing that it will try the shebang line.
# This behavior is subject to change in Apache release 2.0.
# Each mechanism has it's own specific security weaknesses, from the means
# to run a program you didn't intend the website owner to invoke, and the
# best method is a matter of great debate.
# To enable the this Windows specific behavior (and therefore -disable- the
# equivilant Unix behavior), uncomment the following directive:
#ScriptInterpreterSource registry
# The directive above can be placed in individual <Directory> blocks or the
# .htaccess file, with either the 'registry' (Windows behavior) or 'script'
# (Unix behavior) option, and will override this server default option.
# Aliases: Add here as many aliases as you need (with no limit). The format is
# Alias fakename realname
<IfModule mod_alias.c>
# Note that if you include a trailing / on fakename then the server will
# require it to be present in the URL. So "/icons" isn't aliased in this
# example, only "/icons/"..
Alias /jservdocs/ "E:\oracle\product\10.1.0\Companion\Apache\Jserv\docs/"
Alias /javacachedocs/ "E:\oracle\product\10.1.0\Companion\javacache\javadoc/"
Alias /icons/ "E:\oracle\product\10.1.0\Companion\Apache\Apache\icons/"
Alias /i/ "E:\oracle\product\10.1.0\Companion\Apache\Apache\images/"
<Directory "icons">
Options Indexes MultiViews
AllowOverride None
Order allow,deny
Allow from all
</Directory>
<IfModule mod_perl.c>
Alias /perl/ "E:\oracle\product\10.1.0\Companion\Apache\Apache/cgi-bin/"
</IfModule>
# ScriptAlias: This controls which directories contain server scripts.
# ScriptAliases are essentially the same as Aliases, except that
# documents in the realname directory are treated as applications and
# run by the server when requested rather than as documents sent to the client.
# The same rules about trailing "/" apply to ScriptAlias directives as to
# Alias.
ScriptAlias /cgi-bin/ "E:\oracle\product\10.1.0\Companion\Apache\Apache\cgi-bin/"
# "E:\oracle\product\10.1.0\Companion\Apache\Apache/cgi-bin" should be changed to whatever your ScriptAliased
# CGI directory exists, if you have that configured.
<Directory "E:\oracle\product\10.1.0\Companion\Apache\Apache\cgi-bin">
AllowOverride None
Options None
Order allow,deny
Allow from all
</Directory>
</IfModule>
# End of aliases.
# Redirect allows you to tell clients about documents which used to exist in
# your server's namespace, but do not anymore. This allows you to tell the
# clients where to look for the relocated document.
# Format: Redirect old-URI new-URL
# Directives controlling the display of server-generated directory listings.
<IfModule mod_autoindex.c>
# FancyIndexing is whether you want fancy directory indexing or standard
# Note, add the option TrackModified to the IndexOptions default list only
# if all indexed directories reside on NTFS volumes. The TrackModified flag
# will report the Last-Modified date to assist caches and proxies to properly
# track directory changes, but it does not work on FAT volumes.
IndexOptions FancyIndexing
# AddIcon* directives tell the server which icon to show for different
# files or filename extensions. These are only displayed for
# FancyIndexed directories.
AddIconByEncoding (CMP,/icons/compressed.gif) x-compress x-gzip
AddIconByType (TXT,/icons/text.gif) text/*
AddIconByType (IMG,/icons/image2.gif) image/*
AddIconByType (SND,/icons/sound2.gif) audio/*
AddIconByType (VID,/icons/movie.gif) video/*
AddIcon /icons/binary.gif .bin .exe
AddIcon /icons/binhex.gif .hqx
AddIcon /icons/tar.gif .tar
AddIcon /icons/world2.gif .wrl .wrl.gz .vrml .vrm .iv
AddIcon /icons/compressed.gif .Z .z .tgz .gz .zip
AddIcon /icons/a.gif .ps .ai .eps
AddIcon /icons/layout.gif .html .shtml .htm .pdf
AddIcon /icons/text.gif .txt
AddIcon /icons/c.gif .c
AddIcon /icons/p.gif .pl .py
AddIcon /icons/f.gif .for
AddIcon /icons/dvi.gif .dvi
AddIcon /icons/uuencoded.gif .uu
AddIcon /icons/script.gif .conf .sh .shar .csh .ksh .tcl
AddIcon /icons/tex.gif .tex
AddIcon /icons/bomb.gif core
AddIcon /icons/back.gif ..
AddIcon /icons/hand.right.gif README
AddIcon /icons/folder.gif ^^DIRECTORY^^
AddIcon /icons/blank.gif ^^BLANKICON^^
# DefaultIcon is which icon to show for files which do not have an icon
# explicitly set.
DefaultIcon /icons/unknown.gif
# AddDescription allows you to place a short description after a file in
# server-generated indexes. These are only displayed for FancyIndexed
# directories.
# Format: AddDescription "description" filename
#AddDescription "GZIP compressed document" .gz
#AddDescription "tar archive" .tar
#AddDescription "GZIP compressed tar archive" .tgz
# ReadmeName is the name of the README file the server will look for by
# default, and append to directory listings.
# HeaderName is the name of a file which should be prepended to
# directory indexes.
# If MultiViews are amongst the Options in effect, the server will
# first look for name.html and include it if found. If name.html
# doesn't exist, the server will then look for name.txt and include
# it as plaintext if found.
ReadmeName README
HeaderName HEADER
# IndexIgnore is a set of filenames which directory indexing should ignore
# and not include in the listing. Shell-style wildcarding is permitted.
IndexIgnore .??* *~ *# HEADER* README* RCS CVS *,v *,t
</IfModule>
# End of indexing directives.
# Document types.
<IfModule mod_mime.c>
# AddEncoding allows you to have certain browsers (Mosaic/X 2.1+) uncompress
# information on the fly. Note: Not all browsers support this.
# Despite the name similarity, the following Add* directives have nothing
# to do with the FancyIndexing customization directives above.
AddEncoding x-compress Z
AddEncoding x-gzip gz tgz
# AddLanguage allows you to specify the language of a document. You can
# then use content negotiation to give a browser a file in a language
# it can understand.
# Note 1: The suffix does not have to be the same as the language
# keyword --- those with documents in Polish (whose net-standard
# language code is pl) may wish to use "AddLanguage pl .po" to
# avoid the ambiguity with the common suffix for perl scripts.
# Note 2: The example entries below illustrate that in quite
# some cases the two character 'Language' abbriviation is not
# identical to the two character 'Country' code for its country,
# E.g. 'Danmark/dk' versus 'Danish/da'.
# Note 3: In the case of 'ltz' we violate the RFC by using a three char
# specifier. But there is 'work in progress' to fix this and get
# the reference data for rfc1766 cleaned up.
# Danish (da) - Dutch (nl) - English (en) - Estonian (ee)
# French (fr) - German (de) - Greek-Modern (el)
# Italian (it) - Korean (kr) - Norwegian (no)
# Portugese (pt) - Luxembourgeois* (ltz)
# Spanish (es) - Swedish (sv) - Catalan (ca) - Czech(cz)
# Polish (pl) - Brazilian Portuguese (pt-br) - Japanese (ja)
# Russian (ru)
AddLanguage ar .ar
AddLanguage da .dk .da
AddLanguage nl .nl
AddLanguage en .en
AddLanguage et .ee
AddLanguage fi .fi
AddLanguage fr .fr
AddLanguage de .de
AddLanguage el .el
AddLanguage es .es_ES .es
AddLanguage he .he .iw
AddLanguage hu .hu
AddCharset ISO-8859-8 .iso8859-8
AddLanguage it .it
AddLanguage ja .ja
AddCharset ISO-2022-JP .jis
AddLanguage ko .ko
AddLanguage kr .kr
AddCharset ISO-2022-KR .iso-kr
AddLanguage nn .nn
AddLanguage no .no
AddLanguage pl .po
AddCharset ISO-8859-2 .iso-pl
AddLanguage pt .pt
AddLanguage pt-br .pt_BR .pt-br
AddLanguage ltz .lu
AddLanguage ca .ca
AddLanguage sk .sk
AddLanguage sv .sv
AddLanguage th .th
AddLanguage tr .tr
AddLanguage cz .cz .cs
AddLanguage ro .ro
AddLanguage ru .ru
AddLanguage zh-cn .zh_CN
AddLanguage zh-tw .zh_TW
AddCharset Big5 .Big5 .big5
AddCharset WINDOWS-1251 .cp-1251
AddCharset CP866 .cp866
AddCharset ISO-8859-5 .iso-ru
AddCharset KOI8-R .koi8-r
AddCharset UCS-2 .ucs2
AddCharset UCS-4 .ucs4
AddCharset UTF-8 .utf8
# LanguagePriority allows you to give precedence to some languages
# in case of a tie during content negotiation.
# Just list the languages in decreasing order of preference. We have
# more or less alphabetized them here. You probably want to change this.
<IfModule mod_negotiation.c>
LanguagePriority ar en da nl et fi fr de el it ja ko kr no pl pt pt-br ro ru ltz ca es sk sv th tr zh-cn zh-tw zh-cn
</IfModule>
# AddType allows you to tweak mime.types without actually editing it, or to
# make certain files to be certain types.
# For example, the PHP 3.x module (not part of the Apache distribution - see
# http://www.php.net) will typically use:
#AddType application/x-httpd-php3 .php3
#AddType application/x-httpd-php3-source .phps
# And for PHP 4.x, use:
#AddType application/x-httpd-php .php
#AddType application/x-httpd-php-source .phps
AddType application/x-tar .tgz
# AddHandler allows you to map certain file extensions to "handlers",
# actions unrelated to filetype. These can be either built into the server
# or added with the Action command (see below)
# If you want to use server side includes, or CGI outside
# ScriptAliased directories, uncomment the following lines.
# To use CGI scripts:
#AddHandler cgi-script .cgi
# To use server-parsed HTML files
#AddType text/html .shtml
#AddHandler server-parsed .shtml
AddType text/xml xbl
AddType text/x-component htc
# Uncomment the following line to enable Apache's send-asis HTTP file
# feature
#AddHandler send-as-is asis
# If you wish to use server-parsed imagemap files, use
#AddHandler imap-file map
# To enable type maps, you might want to use
#AddHandler type-map var
</IfModule>
# End of document types.
# Action lets you define media types that will execute a script whenever
# a matching file is called. This eliminates the need for repeated URL
# pathnames for oft-used CGI file processors.
# Format: Action media/type /cgi-script/location
# Format: Action handler-name /cgi-script/location
# MetaDir: specifies the name of the directory in which Apache can find
# meta information files. These files contain additional HTTP headers
# to include when sending the document
#MetaDir .web
# MetaSuffix: specifies the file name suffix for the file containing the
# meta information.
#MetaSuffix .meta
# Customizable error response (Apache style)
# these come in three flavors
# 1) plain text
#ErrorDocument 500 "The server made a boo boo.
# n.b. the single leading (") marks it as text, it does not get output
# 2) local redirects
#ErrorDocument 404 /missing.html
# to redirect to local URL /missing.html
#ErrorDocument 404 /cgi-bin/missing_handler.pl
# N.B.: You can redirect to a script or a document using server-side-includes.
# 3) external redirects
#ErrorDocument 402 http://some.other_server.com/subscription_info.html
# N.B.: Many of the environment variables associated with the original
# request will not be available to such a script.
# Customize behaviour based on the browser
<IfModule mod_setenvif.c>
# The following directives modify normal HTTP response behavior.
# The first directive disables keepalive for Netscape 2.x and browsers that
# spoof it. There are known problems with these browser implementations.
# The second directive is for Microsoft Internet Explorer 4.0b2
# which has a broken HTTP/1.1 implementation and does not properly
# support keepalive when it is used on 301 or 302 (redirect) responses.
BrowserMatch "Mozilla/2" nokeepalive
BrowserMatch "MSIE 4\.0b2;" nokeepalive downgrade-1.0 force-response-1.0
# The following directive disables HTTP/1.1 responses to browsers which
# are in violation of the HTTP/1.0 spec by not being able to grok a
# basic 1.1 response.
BrowserMatch "RealPlayer 4\.0" force-response-1.0
BrowserMatch "Java/1\.0" force-response-1.0
BrowserMatch "JDK/1\.0" force-response-1.0
</IfModule>
# End of browser customization directives
# Allow server status reports, with the URL of http://servername/server-status
# Change the ".your_domain.com" to match your domain to enable.
<Location /server-status>
SetHandler server-status
Order deny,allow
Deny from all
Allow from localhost localhost localhost
</Location>
# Allow remote server configuration reports, with the URL of
# http://servername/server-info (requires that mod_info.c be loaded).
# Change the ".your_domain.com" to match your domain to enable.
#<Location /server-info>
# SetHandler server-info
# Order deny,allow
# Deny from all
# Allow from .your_domain.com
#</Location>
# There have been reports of people trying to abuse an old bug from pre-1.1
# days. This bug involved a CGI script distributed as a part of Apache.
# By uncommenting these lines you can redirect these attacks to a logging
# script on phf.apache.org. Or, you can record them yourself, using the script
# support/phf_abuse_log.cgi.
#<Location /cgi-bin/phf*>
# Deny from all
# ErrorDocument 403 http://phf.apache.org/phf_abuse_log.cgi
#</Location>
# Proxy Server directives. Uncomment the following lines to
# enable the proxy server:
#<IfModule mod_proxy.c>
# ProxyRequests On
# <Directory proxy:*>
# Order deny,allow
# Deny from all
# Allow from .your_domain.com
# </Directory>
# Enable/disable the handling of HTTP/1.1 "Via:" headers.
# ("Full" adds the server version; "Block" removes all outgoing Via: headers)
# Set to one of: Off | On | Full | Block
# ProxyVia On
# To enable the cache as well, edit and uncomment the following lines:
# (no cacheing without CacheRoot)
# CacheRoot "E:\oracle\product\10.1.0\Companion\Apache\Apache\proxy"
# CacheSize 5
# CacheGcInterval 4
# CacheMaxExpire 24
# CacheLastModifiedFactor 0.1
# CacheDefaultExpire 1
# NoCache a_domain.com another_domain.edu joes.garage_sale.com
#</IfModule>
# End of proxy directives.
### Section 3: Virtual Hosts
# VirtualHost: If you want to maintain multiple domains/hostnames on your
# machine you can setup VirtualHost containers for them. Most configurations
# use only name-based virtual hosts so the server doesn't need to worry about
# IP addresses. This is indicated by the asterisks in the directives below.
# Please see the documentation at <URL:http://www.apache.org/docs/vhosts/>
# for further details before you try to setup virtual hosts.
# You may use the command line option '-S' to verify your virtual host
# configuration.
# Use name-based virtual hosting.
#NameVirtualHost *
#NameVirtualHost 12.34.56.78:80
#NameVirtualHost 12.34.56.78
# VirtualHost example:
# Almost any Apache directive may go into a VirtualHost container.
# The first VirtualHost section is used for requests without a known
# server name.
#<VirtualHost *>
# ServerAdmin [email protected]
# DocumentRoot /www/docs/dummy-host.example.com
# ServerName dummy-host.example.com
# ErrorLog logs/dummy-host.example.com-error_log
# CustomLog logs/dummy-host.example.com-access_log common
#</VirtualHost>
#<VirtualHost default:*>
#</VirtualHost>
SetEnv PERL5LIB "E:\oracle\product\10.1.0\Companion\perl\5.6.1\lib:E:\oracle\product\10.1.0\Companion\perl\site\5.6.1\lib"
<IfModule mod_perl.c>
# Perl Directives
# PerlWarn On
# PerlFreshRestart On
# PerlSetEnv PERL5OPT Tw
# PerlSetEnv PERL5LIB "E:\oracle\product\10.1.0\Companion\perl\5.6.1\lib:E:\oracle\product\10.1.0\Companion\perl\site\5.6.1\lib"
PerlModule Apache
# PerlModule Apache::Status
PerlModule Apache::Registry
# PerlModule Apache::CGI
# PerlModule Apache::DBI
# PerlRequire
<Location /perl>
SetHandler perl-script
PerlHandler Apache::Registry
AddHandler perl-script .pl
Options +ExecCGI
PerlSendHeader On
</Location>
# <Location /perl-status>
# SetHandler perl-script
# PerlHandler Apache::Status
# order deny,allow
# deny from all
# allow from localhost
# </Location>
</IfModule>
#Protect WEB-INF directory
<DirectoryMatch /WEB-INF/>
Order deny,allow
Deny from all
</DirectoryMatch>
# Setup of FastCGI module
<IfModule mod_fastcgi.c>
Alias /fastcgi/ "E:\oracle\product\10.1.0\Companion\Apache\fastcgi/"
ScriptAlias /fcgi-bin/ "E:\oracle\product\10.1.0\Companion\Apache\Apache\fcgi-bin/"
<Directory "E:\oracle\product\10.1.0\Companion\Apache\Apache\fcgi-bin">
AllowOverride None
Options None
Order allow,deny
Allow from all
SetHandler fastcgi-script
<IfModule mod_ossl.c>
SSLOptions +StdEnvVars
</IfModule>
</Directory>
</IfModule>
# Include the configuration for Apache JServ 1.1
#include "E:\oracle\product\10.1.0\Companion\Apache\Jserv\conf\jserv.conf"
# Setup of oprocmgr module.
# This directive identifies each remote apache instance that will be
# sending requests to processes (e.g., JServs), managed by local Apache
# instances. This directive is used by the local process manager to share
# routing information with remote apache instances via non-SSL HTTP messages.
# The directive is repeated for each remote apache instance that will be
# sending requests. The ProcNode directive that refers to the local apache
# instance will be ignored, but may be supplied to facilitate uniformity
# in configuration across apache instances. Arguments to the ProcNode must
# be sufficient to reach the remote instance of apache via non-SSL HTTP
# messages. It is not considered an error if the remote apache instance is
# unreachable, as no assumption is made about the starting order or
# availability of apache instances.
# Syntax: ProcNode <hostname> <port>
# Example: ProcNode abc.com 7777
<IfModule mod_oprocmgr.c>
<Location /oprocmgr-service>
SetHandler oprocmgr-service
Order deny,allow
Deny from all
Allow from localhost localhost localhost
</Location>
<Location /oprocmgr-status>
SetHandler oprocmgr-status
Order deny,allow
Deny from all
Allow from localhost localhost localhost
</Location>
</IfModule>
# Include the mod_oc4j configuration file
include "E:\oracle\product\10.1.0\Companion\Apache\Apache\conf\mod_oc4j.conf"
# Include the mod_dms configuration file
include "E:\oracle\product\10.1.0\Companion\Apache\Apache\conf\dms.conf"
# Loading rewrite_module here so it loads before mod_oc4j
LoadModule rewrite_module modules/ApacheModuleRewrite.dll
# Include the SSL definitions and Virtual Host container
include "E:\oracle\product\10.1.0\Companion\Apache\Apache\conf\ssl.conf"
# Include the mod_osso configuration file
#include "E:\oracle\product\10.1.0\Companion\Apache\Apache\conf\mod_osso.conf"
# Include the Oracle configuration file for custom settings
include "E:\oracle\product\10.1.0\Companion\Apache\Apache\conf\oracle_apache.conf"
------------------------------------------------------------------------------------------------------------------Firstly, there's no such thing as Apache 9.3, there's Apache 1 (and subversions) and Apache 2 (and subversions). Your error message -
Oracle-HTTP-Server/1.3.28Shows you're using Apache 1.3.28
Secondly, I'm confused by your comment -
I do not have Apache 9.3 or higher but I think oracle should offer this in its companion CDOracle does offer the Apache server, if you're saying you didn't get it from Oracle then where did your Apache server come from?
Thirdly, I notice from your config file -
ErrorLog "|E:\oracle\product\10.1.0\Companion\Apache\Apache\bin\rotatelogs logs/error_log 43200"That you're piping the logs through rotatelogs, are you sure the logfiles haven't just been renamed? -
Problem with Configuring Tomcat for running jsp web applications..Plz HELP
I am using Tomcat 5.5 and Jdk 1.5.0_12 and Oracle 10g. I am using jdbc-odbc bridge connection
to connect to the database. I have placed my project folder called
tdm under the webapps folder in Tomcat. This 'tdm' folder consists of
a collection of html pages,jsp pages and images of my project. Also I created a
WEB-INF folderand in that I have lib folder which contains catalina-root.jar
, classes12.jar and nls_charset.jar files. And also in the WEB-INF folder I have the web.xml
file which looks like this
<?xml version="1.0" encoding="ISO-8859-1"?>
<!--
Copyright 2004 The Apache Software Foundation
Licensed under the Apache License, Version 2.0 (the "License");
you may not use this file except in compliance with the License.
You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software
distributed under the License is distributed on an "AS IS" BASIS,
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
See the License for the specific language governing permissions and
limitations under the License.
-->
<web-app>
<resource-ref>
<description>Oracle Datasource example</description>
<res-ref-name>jdbc/gdn</res-ref-name>
<res-type>javax.sql.DataSource</res-type>
<res-auth>Container</res-auth>
</resource-ref>
</web-app>
My Server.xml file in Tomcat\conf folder is as follows
<!-- Example Server Configuration File -->
<!-- Note that component elements are nested corresponding to their
parent-child relationships with each other -->
<!-- A "Server" is a singleton element that represents the entire JVM,
which may contain one or more "Service" instances. The Server
listens for a shutdown command on the indicated port.
Note: A "Server" is not itself a "Container", so you may not
define subcomponents such as "Valves" or "Loggers" at this level.
-->
<Server port="8005" shutdown="SHUTDOWN">
<!-- Comment these entries out to disable JMX MBeans support used for the
administration web application -->
<Listener className="org.apache.catalina.mbeans.ServerLifecycleListener" />
<Listener className="org.apache.catalina.mbeans.GlobalResourcesLifecycleListener" />
<!-- Global JNDI resources -->
<GlobalNamingResources>
<!-- Test entry for demonstration purposes -->
<Environment name="simpleValue" type="java.lang.Integer" value="30"/>
<!-- Editable user database that can also be used by
UserDatabaseRealm to authenticate users -->
<Resource name="UserDatabase" auth="Container"
type="org.apache.catalina.UserDatabase"
description="User database that can be updated and saved"
factory="org.apache.catalina.users.MemoryUserDatabaseFactory"
pathname="conf/tomcat-users.xml" />
<Resource name="jdbc/gdn" auth="Container"
type="javax.sql.DataSource" driverClassName="sun.jdbc.odbc.JdbcOdbcDriver"
url="jdbc:odbc:gdn"
username="system" password="tiger" maxActive="20" maxIdle="10"
maxWait="-1"/>
</GlobalNamingResources>
<!-- A "Service" is a collection of one or more "Connectors" that share
a single "Container" (and therefore the web applications visible
within that Container). Normally, that Container is an "Engine",
but this is not required.
Note: A "Service" is not itself a "Container", so you may not
define subcomponents such as "Valves" or "Loggers" at this level.
-->
<!-- Define the Tomcat Stand-Alone Service -->
<Service name="Catalina">
<!-- A "Connector" represents an endpoint by which requests are received
and responses are returned. Each Connector passes requests on to the
associated "Container" (normally an Engine) for processing.
By default, a non-SSL HTTP/1.1 Connector is established on port 8080.
You can also enable an SSL HTTP/1.1 Connector on port 8443 by
following the instructions below and uncommenting the second Connector
entry. SSL support requires the following steps (see the SSL Config
HOWTO in the Tomcat 5 documentation bundle for more detailed
instructions):
* If your JDK version 1.3 or prior, download and install JSSE 1.0.2 or
later, and put the JAR files into "$JAVA_HOME/jre/lib/ext".
* Execute:
%JAVA_HOME%\bin\keytool -genkey -alias tomcat -keyalg RSA (Windows)
$JAVA_HOME/bin/keytool -genkey -alias tomcat -keyalg RSA (Unix)
with a password value of "changeit" for both the certificate and
the keystore itself.
By default, DNS lookups are enabled when a web application calls
request.getRemoteHost(). This can have an adverse impact on
performance, so you can disable it by setting the
"enableLookups" attribute to "false". When DNS lookups are disabled,
request.getRemoteHost() will return the String version of the
IP address of the remote client.
-->
<!-- Define a non-SSL HTTP/1.1 Connector on port 8080 -->
<Connector
port="5050" maxThreads="150" minSpareThreads="25" maxSpareThreads="75"
enableLookups="false" redirectPort="8443" acceptCount="100"
connectionTimeout="20000" disableUploadTimeout="true" />
<!-- Note : To disable connection timeouts, set connectionTimeout value
to 0 -->
<!-- Note : To use gzip compression you could set the following properties :
compression="on"
compressionMinSize="2048"
noCompressionUserAgents="gozilla, traviata"
compressableMimeType="text/html,text/xml"
-->
<!-- Define a SSL HTTP/1.1 Connector on port 8443 -->
<!--
<Connector port="8443"
maxThreads="150" minSpareThreads="25" maxSpareThreads="75"
enableLookups="false" disableUploadTimeout="true"
acceptCount="100" scheme="https" secure="true"
clientAuth="false" sslProtocol="TLS" />
-->
<!-- Define an AJP 1.3 Connector on port 8009 -->
<Connector port="8009"
enableLookups="false" redirectPort="8443" protocol="AJP/1.3" />
<!-- Define a Proxied HTTP/1.1 Connector on port 8082 -->
<!-- See proxy documentation for more information about using this. -->
<!--
<Connector port="8082"
maxThreads="150" minSpareThreads="25" maxSpareThreads="75"
enableLookups="false" acceptCount="100" connectionTimeout="20000"
proxyPort="80" disableUploadTimeout="true" />
-->
<!-- An Engine represents the entry point (within Catalina) that processes
every request. The Engine implementation for Tomcat stand alone
analyzes the HTTP headers included with the request, and passes them
on to the appropriate Host (virtual host). -->
<!-- You should set jvmRoute to support load-balancing via AJP ie :
<Engine name="Standalone" defaultHost="localhost" jvmRoute="jvm1">
-->
<!-- Define the top level container in our container hierarchy -->
<Engine name="Catalina" defaultHost="localhost">
<!-- The request dumper valve dumps useful debugging information about
the request headers and cookies that were received, and the response
headers and cookies that were sent, for all requests received by
this instance of Tomcat. If you care only about requests to a
particular virtual host, or a particular application, nest this
element inside the corresponding <Host> or <Context> entry instead.
For a similar mechanism that is portable to all Servlet 2.4
containers, check out the "RequestDumperFilter" Filter in the
example application (the source for this filter may be found in
"$CATALINA_HOME/webapps/examples/WEB-INF/classes/filters").
Request dumping is disabled by default. Uncomment the following
element to enable it. -->
<!--
<Valve className="org.apache.catalina.valves.RequestDumperValve"/>
-->
<!-- Because this Realm is here, an instance will be shared globally -->
<!-- This Realm uses the UserDatabase configured in the global JNDI
resources under the key "UserDatabase". Any edits
that are performed against this UserDatabase are immediately
available for use by the Realm. -->
<Realm className="org.apache.catalina.realm.UserDatabaseRealm"
resourceName="UserDatabase"/>
<!-- Comment out the old realm but leave here for now in case we
need to go back quickly -->
<!--
<Realm className="org.apache.catalina.realm.MemoryRealm" />
-->
<!-- Replace the above Realm with one of the following to get a Realm
stored in a database and accessed via JDBC -->
<!--
<Realm className="org.apache.catalina.realm.JDBCRealm"
driverName="org.gjt.mm.mysql.Driver"
connectionURL="jdbc:mysql://localhost/authority"
connectionName="test" connectionPassword="test"
userTable="users" userNameCol="user_name" userCredCol="user_pass"
userRoleTable="user_roles" roleNameCol="role_name" />
-->
<!--
<Realm className="org.apache.catalina.realm.JDBCRealm"
driverName="oracle.jdbc.driver.OracleDriver"
connectionURL="jdbc:oracle:thin:@ntserver:1521:ORCL"
connectionName="scott" connectionPassword="tiger"
userTable="users" userNameCol="user_name" userCredCol="user_pass"
userRoleTable="user_roles" roleNameCol="role_name" />
-->
<!--
<Realm className="org.apache.catalina.realm.JDBCRealm"
driverName="sun.jdbc.odbc.JdbcOdbcDriver"
connectionURL="jdbc:odbc:CATALINA"
userTable="users" userNameCol="user_name" userCredCol="user_pass"
userRoleTable="user_roles" roleNameCol="role_name" />
-->
<!-- Define the default virtual host
Note: XML Schema validation will not work with Xerces 2.2.
-->
<Host name="localhost" appBase="webapps"
unpackWARs="true" autoDeploy="true"
xmlValidation="false" xmlNamespaceAware="false">
<!-- Defines a cluster for this node,
By defining this element, means that every manager will be changed.
So when running a cluster, only make sure that you have webapps in there
that need to be clustered and remove the other ones.
A cluster has the following parameters:
className = the fully qualified name of the cluster class
name = a descriptive name for your cluster, can be anything
mcastAddr = the multicast address, has to be the same for all the nodes
mcastPort = the multicast port, has to be the same for all the nodes
mcastBindAddr = bind the multicast socket to a specific address
mcastTTL = the multicast TTL if you want to limit your broadcast
mcastSoTimeout = the multicast readtimeout
mcastFrequency = the number of milliseconds in between sending a "I'm alive" heartbeat
mcastDropTime = the number a milliseconds before a node is considered "dead" if no heartbeat is received
tcpThreadCount = the number of threads to handle incoming replication requests, optimal would be the same amount of threads as nodes
tcpListenAddress = the listen address (bind address) for TCP cluster request on this host,
in case of multiple ethernet cards.
auto means that address becomes
InetAddress.getLocalHost().getHostAddress()
tcpListenPort = the tcp listen port
tcpSelectorTimeout = the timeout (ms) for the Selector.select() method in case the OS
has a wakup bug in java.nio. Set to 0 for no timeout
printToScreen = true means that managers will also print to std.out
expireSessionsOnShutdown = true means that
useDirtyFlag = true means that we only replicate a session after setAttribute,removeAttribute has been called.
false means to replicate the session after each request.
false means that replication would work for the following piece of code: (only for SimpleTcpReplicationManager)
<%
HashMap map = (HashMap)session.getAttribute("map");
map.put("key","value");
%>
replicationMode = can be either 'pooled', 'synchronous' or 'asynchronous'.
* Pooled means that the replication happens using several sockets in a synchronous way. Ie, the data gets replicated, then the request return. This is the same as the 'synchronous' setting except it uses a pool of sockets, hence it is multithreaded. This is the fastest and safest configuration. To use this, also increase the nr of tcp threads that you have dealing with replication.
* Synchronous means that the thread that executes the request, is also the
thread the replicates the data to the other nodes, and will not return until all
nodes have received the information.
* Asynchronous means that there is a specific 'sender' thread for each cluster node,
so the request thread will queue the replication request into a "smart" queue,
and then return to the client.
The "smart" queue is a queue where when a session is added to the queue, and the same session
already exists in the queue from a previous request, that session will be replaced
in the queue instead of replicating two requests. This almost never happens, unless there is a
large network delay.
-->
<!--
When configuring for clustering, you also add in a valve to catch all the requests
coming in, at the end of the request, the session may or may not be replicated.
A session is replicated if and only if all the conditions are met:
1. useDirtyFlag is true or setAttribute or removeAttribute has been called AND
2. a session exists (has been created)
3. the request is not trapped by the "filter" attribute
The filter attribute is to filter out requests that could not modify the session,
hence we don't replicate the session after the end of this request.
The filter is negative, ie, anything you put in the filter, you mean to filter out,
ie, no replication will be done on requests that match one of the filters.
The filter attribute is delimited by ;, so you can't escape out ; even if you wanted to.
filter=".*\.gif;.*\.js;" means that we will not replicate the session after requests with the URI
ending with .gif and .js are intercepted.
The deployer element can be used to deploy apps cluster wide.
Currently the deployment only deploys/undeploys to working members in the cluster
so no WARs are copied upons startup of a broken node.
The deployer watches a directory (watchDir) for WAR files when watchEnabled="true"
When a new war file is added the war gets deployed to the local instance,
and then deployed to the other instances in the cluster.
When a war file is deleted from the watchDir the war is undeployed locally
and cluster wide
-->
<!--
<Cluster className="org.apache.catalina.cluster.tcp.SimpleTcpCluster"
managerClassName="org.apache.catalina.cluster.session.DeltaManager"
expireSessionsOnShutdown="false"
useDirtyFlag="true"
notifyListenersOnReplication="true">
<Membership
className="org.apache.catalina.cluster.mcast.McastService"
mcastAddr="228.0.0.4"
mcastPort="45564"
mcastFrequency="500"
mcastDropTime="3000"/>
<Receiver
className="org.apache.catalina.cluster.tcp.ReplicationListener"
tcpListenAddress="auto"
tcpListenPort="4001"
tcpSelectorTimeout="100"
tcpThreadCount="6"/>
<Sender
className="org.apache.catalina.cluster.tcp.ReplicationTransmitter"
replicationMode="pooled"
ackTimeout="15000"/>
<Valve className="org.apache.catalina.cluster.tcp.ReplicationValve"
filter=".*\.gif;.*\.js;.*\.jpg;.*\.htm;.*\.html;.*\.txt;"/>
<Deployer className="org.apache.catalina.cluster.deploy.FarmWarDeployer"
tempDir="/tmp/war-temp/"
deployDir="/tmp/war-deploy/"
watchDir="/tmp/war-listen/"
watchEnabled="false"/>
</Cluster>
-->
<!-- Normally, users must authenticate themselves to each web app
individually. Uncomment the following entry if you would like
a user to be authenticated the first time they encounter a
resource protected by a security constraint, and then have that
user identity maintained across all web applications contained
in this virtual host. -->
<!--
<Valve className="org.apache.catalina.authenticator.SingleSignOn" />
-->
<!-- Access log processes all requests for this virtual host. By
default, log files are created in the "logs" directory relative to
$CATALINA_HOME. If you wish, you can specify a different
directory with the "directory" attribute. Specify either a relative
(to $CATALINA_HOME) or absolute path to the desired directory.
-->
<!--
<Valve className="org.apache.catalina.valves.AccessLogValve"
directory="logs" prefix="localhost_access_log." suffix=".txt"
pattern="common" resolveHosts="false"/>
-->
<!-- Access log processes all requests for this virtual host. By
default, log files are created in the "logs" directory relative to
$CATALINA_HOME. If you wish, you can specify a different
directory with the "directory" attribute. Specify either a relative
(to $CATALINA_HOME) or absolute path to the desired directory.
This access log implementation is optimized for maximum performance,
but is hardcoded to support only the "common" and "combined" patterns.
-->
<!--
<Valve className="org.apache.catalina.valves.FastCommonAccessLogValve"
directory="logs" prefix="localhost_access_log." suffix=".txt"
pattern="common" resolveHosts="false"/>
-->
<Context path="/tdm" docBase="tdm" debug="0" reloadable="true" />
</Host>
</Engine>
</Service>
</Server>
I have set the context path to /tdm in the server.xml file. Should this be placed in context.xml?
My first page in the project is called Homepage.html. To start my project I give http://localhost:5050/tdm/homepage.html
in a browser. Here I accept a username and password from the user and then do the validation in
a valid.jsp file, where I connect to the database and check and use jsp:forward to go to next pages
accordingly. However when I enter the username and password and click Go in the homepage, nothing is
displayed on the next page. The URL in the browser says valid.jsp but a blank screen appears.
WHY DOES IT HAPPEN SO? DOES IT MEAN THAT TOMCAT IS NOT RECOGNIZING JAVA IN MY SYSTEM OR IS IT A PROBLEM
WITH THE DATABASE CONNECTION OR SOMETHING ELSE? I FEEL THAT TOMCAT IS NOT EXECUTING JSP COMMANDS?
IS IT POSSIBLE?WHY WILL THIS HAPPEN?
I set the JAVA_HOME and CATALINA_HOME environment to the jdk and tomcat folders resp.
Is there any other thing that I need to set in classpath? Should I have my project as a
WAR file in the webapps of TOMCAT or just a folder i.e. directory structure will fine?I am using Tomcat 5.5 and Jdk 1.5.0_12 and Oracle 10g. I am using jdbc-odbc bridge connection
to connect to the database. I have placed my project folder called
tdm under the webapps folder in Tomcat. This 'tdm' folder consists of
a collection of html pages,jsp pages and images of my project. Also I created a
WEB-INF folderand in that I have lib folder which contains catalina-root.jar
, classes12.jar and nls_charset.jar files. And also in the WEB-INF folder I have the web.xml
file which looks like this
<?xml version="1.0" encoding="ISO-8859-1"?>
<!--
Copyright 2004 The Apache Software Foundation
Licensed under the Apache License, Version 2.0 (the "License");
you may not use this file except in compliance with the License.
You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software
distributed under the License is distributed on an "AS IS" BASIS,
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
See the License for the specific language governing permissions and
limitations under the License.
-->
<web-app>
<resource-ref>
<description>Oracle Datasource example</description>
<res-ref-name>jdbc/gdn</res-ref-name>
<res-type>javax.sql.DataSource</res-type>
<res-auth>Container</res-auth>
</resource-ref>
</web-app>
My Server.xml file in Tomcat\conf folder is as follows
<!-- Example Server Configuration File -->
<!-- Note that component elements are nested corresponding to their
parent-child relationships with each other -->
<!-- A "Server" is a singleton element that represents the entire JVM,
which may contain one or more "Service" instances. The Server
listens for a shutdown command on the indicated port.
Note: A "Server" is not itself a "Container", so you may not
define subcomponents such as "Valves" or "Loggers" at this level.
-->
<Server port="8005" shutdown="SHUTDOWN">
<!-- Comment these entries out to disable JMX MBeans support used for the
administration web application -->
<Listener className="org.apache.catalina.mbeans.ServerLifecycleListener" />
<Listener className="org.apache.catalina.mbeans.GlobalResourcesLifecycleListener" />
<!-- Global JNDI resources -->
<GlobalNamingResources>
<!-- Test entry for demonstration purposes -->
<Environment name="simpleValue" type="java.lang.Integer" value="30"/>
<!-- Editable user database that can also be used by
UserDatabaseRealm to authenticate users -->
<Resource name="UserDatabase" auth="Container"
type="org.apache.catalina.UserDatabase"
description="User database that can be updated and saved"
factory="org.apache.catalina.users.MemoryUserDatabaseFactory"
pathname="conf/tomcat-users.xml" />
<Resource name="jdbc/gdn" auth="Container"
type="javax.sql.DataSource" driverClassName="sun.jdbc.odbc.JdbcOdbcDriver"
url="jdbc:odbc:gdn"
username="system" password="tiger" maxActive="20" maxIdle="10"
maxWait="-1"/>
</GlobalNamingResources>
<!-- A "Service" is a collection of one or more "Connectors" that share
a single "Container" (and therefore the web applications visible
within that Container). Normally, that Container is an "Engine",
but this is not required.
Note: A "Service" is not itself a "Container", so you may not
define subcomponents such as "Valves" or "Loggers" at this level.
-->
<!-- Define the Tomcat Stand-Alone Service -->
<Service name="Catalina">
<!-- A "Connector" represents an endpoint by which requests are received
and responses are returned. Each Connector passes requests on to the
associated "Container" (normally an Engine) for processing.
By default, a non-SSL HTTP/1.1 Connector is established on port 8080.
You can also enable an SSL HTTP/1.1 Connector on port 8443 by
following the instructions below and uncommenting the second Connector
entry. SSL support requires the following steps (see the SSL Config
HOWTO in the Tomcat 5 documentation bundle for more detailed
instructions):
* If your JDK version 1.3 or prior, download and install JSSE 1.0.2 or
later, and put the JAR files into "$JAVA_HOME/jre/lib/ext".
* Execute:
%JAVA_HOME%\bin\keytool -genkey -alias tomcat -keyalg RSA (Windows)
$JAVA_HOME/bin/keytool -genkey -alias tomcat -keyalg RSA (Unix)
with a password value of "changeit" for both the certificate and
the keystore itself.
By default, DNS lookups are enabled when a web application calls
request.getRemoteHost(). This can have an adverse impact on
performance, so you can disable it by setting the
"enableLookups" attribute to "false". When DNS lookups are disabled,
request.getRemoteHost() will return the String version of the
IP address of the remote client.
-->
<!-- Define a non-SSL HTTP/1.1 Connector on port 8080 -->
<Connector
port="5050" maxThreads="150" minSpareThreads="25" maxSpareThreads="75"
enableLookups="false" redirectPort="8443" acceptCount="100"
connectionTimeout="20000" disableUploadTimeout="true" />
<!-- Note : To disable connection timeouts, set connectionTimeout value
to 0 -->
<!-- Note : To use gzip compression you could set the following properties :
compression="on"
compressionMinSize="2048"
noCompressionUserAgents="gozilla, traviata"
compressableMimeType="text/html,text/xml"
-->
<!-- Define a SSL HTTP/1.1 Connector on port 8443 -->
<!--
<Connector port="8443"
maxThreads="150" minSpareThreads="25" maxSpareThreads="75"
enableLookups="false" disableUploadTimeout="true"
acceptCount="100" scheme="https" secure="true"
clientAuth="false" sslProtocol="TLS" />
-->
<!-- Define an AJP 1.3 Connector on port 8009 -->
<Connector port="8009"
enableLookups="false" redirectPort="8443" protocol="AJP/1.3" />
<!-- Define a Proxied HTTP/1.1 Connector on port 8082 -->
<!-- See proxy documentation for more information about using this. -->
<!--
<Connector port="8082"
maxThreads="150" minSpareThreads="25" maxSpareThreads="75"
enableLookups="false" acceptCount="100" connectionTimeout="20000"
proxyPort="80" disableUploadTimeout="true" />
-->
<!-- An Engine represents the entry point (within Catalina) that processes
every request. The Engine implementation for Tomcat stand alone
analyzes the HTTP headers included with the request, and passes them
on to the appropriate Host (virtual host). -->
<!-- You should set jvmRoute to support load-balancing via AJP ie :
<Engine name="Standalone" defaultHost="localhost" jvmRoute="jvm1">
-->
<!-- Define the top level container in our container hierarchy -->
<Engine name="Catalina" defaultHost="localhost">
<!-- The request dumper valve dumps useful debugging information about
the request headers and cookies that were received, and the response
headers and cookies that were sent, for all requests received by
this instance of Tomcat. If you care only about requests to a
particular virtual host, or a particular application, nest this
element inside the corresponding <Host> or <Context> entry instead.
For a similar mechanism that is portable to all Servlet 2.4
containers, check out the "RequestDumperFilter" Filter in the
example application (the source for this filter may be found in
"$CATALINA_HOME/webapps/examples/WEB-INF/classes/filters").
Request dumping is disabled by default. Uncomment the following
element to enable it. -->
<!--
<Valve className="org.apache.catalina.valves.RequestDumperValve"/>
-->
<!-- Because this Realm is here, an instance will be shared globally -->
<!-- This Realm uses the UserDatabase configured in the global JNDI
resources under the key "UserDatabase". Any edits
that are performed against this UserDatabase are immediately
available for use by the Realm. -->
<Realm className="org.apache.catalina.realm.UserDatabaseRealm"
resourceName="UserDatabase"/>
<!-- Comment out the old realm but leave here for now in case we
need to go back quickly -->
<!--
<Realm className="org.apache.catalina.realm.MemoryRealm" />
-->
<!-- Replace the above Realm with one of the following to get a Realm
stored in a database and accessed via JDBC -->
<!--
<Realm className="org.apache.catalina.realm.JDBCRealm"
driverName="org.gjt.mm.mysql.Driver"
connectionURL="jdbc:mysql://localhost/authority"
connectionName="test" connectionPassword="test"
userTable="users" userNameCol="user_name" userCredCol="user_pass"
userRoleTable="user_roles" roleNameCol="role_name" />
-->
<!--
<Realm className="org.apache.catalina.realm.JDBCRealm"
driverName="oracle.jdbc.driver.OracleDriver"
connectionURL="jdbc:oracle:thin:@ntserver:1521:ORCL"
connectionName="scott" connectionPassword="tiger"
userTable="users" userNameCol="user_name" userCredCol="user_pass"
userRoleTable="user_roles" roleNameCol="role_name" />
-->
<!--
<Realm className="org.apache.catalina.realm.JDBCRealm"
driverName="sun.jdbc.odbc.JdbcOdbcDriver"
connectionURL="jdbc:odbc:CATALINA"
userTable="users" userNameCol="user_name" userCredCol="user_pass"
userRoleTable="user_roles" roleNameCol="role_name" />
-->
<!-- Define the default virtual host
Note: XML Schema validation will not work with Xerces 2.2.
-->
<Host name="localhost" appBase="webapps"
unpackWARs="true" autoDeploy="true"
xmlValidation="false" xmlNamespaceAware="false">
<!-- Defines a cluster for this node,
By defining this element, means that every manager will be changed.
So when running a cluster, only make sure that you have webapps in there
that need to be clustered and remove the other ones.
A cluster has the following parameters:
className = the fully qualified name of the cluster class
name = a descriptive name for your cluster, can be anything
mcastAddr = the multicast address, has to be the same for all the nodes
mcastPort = the multicast port, has to be the same for all the nodes
mcastBindAddr = bind the multicast socket to a specific address
mcastTTL = the multicast TTL if you want to limit your broadcast
mcastSoTimeout = the multicast readtimeout
mcastFrequency = the number of milliseconds in between sending a "I'm alive" heartbeat
mcastDropTime = the number a milliseconds before a node is considered "dead" if no heartbeat is received
tcpThreadCount = the number of threads to handle incoming replication requests, optimal would be the same amount of threads as nodes
tcpListenAddress = the listen address (bind address) for TCP cluster request on this host,
in case of multiple ethernet cards.
auto means that address becomes
InetAddress.getLocalHost().getHostAddress()
tcpListenPort = the tcp listen port
tcpSelectorTimeout = the timeout (ms) for the Selector.select() method in case the OS
has a wakup bug in java.nio. Set to 0 for no timeout
printToScreen = true means that managers will also print to std.out
expireSessionsOnShutdown = true means that
useDirtyFlag = true means that we only replicate a session after setAttribute,removeAttribute has been called.
false means to replicate the session after each request.
false means that replication would work for the following piece of code: (only for SimpleTcpReplicationManager)
<%
HashMap map = (HashMap)session.getAttribute("map");
map.put("key","value");
%>
replicationMode = can be either 'pooled', 'synchronous' or 'asynchronous'.
* Pooled means that the replication happens using several sockets in a synchronous way. Ie, the data gets replicated, then the request return. This is the same as the 'synchronous' setting except it uses a pool of sockets, hence it is multithreaded. This is the fastest and safest configuration. To use this, also increase the nr of tcp threads that you have dealing with replication.
* Synchronous means that the thread that executes the request, is also the
thread the replicates the data to the other nodes, and will not return until all
nodes have received the information.
* Asynchronous means that there is a specific 'sender' thread for each cluster node,
so the request thread will queue the replication request into a "smart" queue,
and then return to the client.
The "smart" queue is a queue where when a session is added to the queue, and the same session
already exists in the queue from a previous request, that session will be replaced
in the queue instead of replicating two requests. This almost never happens, unless there is a
large network delay.
-->
<!--
When configuring for clustering, you also add in a valve to catch all the requests
coming in, at the end of the request, the session may or may not be replicated.
A session is replicated if and only if all the conditions are met:
1. useDirtyFlag is true or setAttribute or removeAttribute has been called AND
2. a session exists (has been created)
3. the request is not trapped by the "filter" attribute
The filter attribute is to filter out requests that could not modify the session,
hence we don't replicate the session after the end of this request.
The filter is negative, ie, anything you put in the filter, you mean to filter out,
ie, no replication will be done on requests that match one of the filters.
The filter attribute is delimited by ;, so you can't escape out ; even if you wanted to.
filter=".*\.gif;.*\.js;" means that we will not replicate the session after requests with the URI
ending with .gif and .js are intercepted.
The deployer element can be used to deploy apps cluster wide.
Currently the deployment only deploys/undeploys to working members in the cluster
so no WARs are copied upons startup of a broken node.
The deployer watches a directory (watchDir) for WAR files when watchEnabled="true"
When a new war file is added the war gets deployed to the local instance,
and then deployed to the other instances in the cluster.
When a war file is deleted from the watchDir the war is undeployed locally
and cluster wide
-->
<!--
<Cluster className="org.apache.catalina.cluster.tcp.SimpleTcpCluster"
managerClassName="org.apache.catalina.cluster.session.DeltaManager"
expireSessionsOnShutdown="false"
useDirtyFlag="true"
notifyListenersOnReplication="true">
<Membership
className="org.apache.catalina.cluster.mcast.McastService"
mcastAddr="228.0.0.4"
mcastPort="45564"
mcastFrequency="500"
mcastDropTime="3000"/>
<Receiver
className="org.apache.catalina.cluster.tcp.ReplicationListener"
tcpListenAddress="auto"
tcpListenPort="4001"
tcpSelectorTimeout="100"
tcpThreadCount="6"/>
<Sender
className="org.apache.catalina.cluster.tcp.ReplicationTransmitter"
replicationMode="pooled"
ackTimeout="15000"/>
<Valve className="org.apache.catalina.cluster.tcp.ReplicationValve"
filter=".*\.gif;.*\.js;.*\.jpg;.*\.htm;.*\.html;.*\.txt;"/>
<Deployer className="org.apache.catalina.cluster.deploy.FarmWarDeployer"
tempDir="/tmp/war-temp/"
deployDir="/tmp/war-deploy/"
watchDir="/tmp/war-listen/"
watchEnabled="false"/>
</Cluster>
-->
<!-- Normally, users must authenticate themselves to each web app
individually. Uncomment the following entry if you would like
a user to be authenticated the first time they encounter a
resource protected by a security constraint, and then have that
user identity maintained across all web applications contained
in this virtual host. -->
<!--
<Valve className="org.apache.catalina.authenticator.SingleSignOn" />
-->
<!-- Access log processes all requests for this virtual host. By
default, log files are created in the "logs" directory relative to
$CATALINA_HOME. If you wish, you can specify a different
directory with the "directory" attribute. Specify either a relative
(to $CATALINA_HOME) or absolute path to the desired directory.
-->
<!--
<Valve className="org.apache.catalina.valves.AccessLogValve"
directory="logs" prefix="localhost_access_log." suffix=".txt"
pattern="common" resolveHosts="false"/>
-->
<!-- Access log processes all requests for this virtual host. By
default, log files are created in the "logs" directory relative to
$CATALINA_HOME. If you wish, you can specify a different
directory with the "directory" attribute. Specify either a relative
(to $CATALINA_HOME) or absolute path to the desired directory.
This access log implementation is optimized for maximum performance,
but is hardcoded to support only the "common" and "combined" patterns.
-->
<!--
<Valve className="org.apache.catalina.valves.FastCommonAccessLogValve"
directory="logs" prefix="localhost_access_log." suffix=".txt"
pattern="common" resolveHosts="false"/>
-->
<Context path="/tdm" docBase="tdm" debug="0" reloadable="true" />
</Host>
</Engine>
</Service>
</Server>
I have set the context path to /tdm in the server.xml file. Should this be placed in context.xml?
My first page in the project is called Homepage.html. To start my project I give http://localhost:5050/tdm/homepage.html
in a browser. Here I accept a username and password from the user and then do the validation in
a valid.jsp file, where I connect to the database and check and use jsp:forward to go to next pages
accordingly. However when I enter the username and password and click Go in the homepage, nothing is
displayed on the next page. The URL in the browser says valid.jsp but a blank screen appears.
WHY DOES IT HAPPEN SO? DOES IT MEAN THAT TOMCAT IS NOT RECOGNIZING JAVA IN MY SYSTEM OR IS IT A PROBLEM
WITH THE DATABASE CONNECTION OR SOMETHING ELSE? I FEEL THAT TOMCAT IS NOT EXECUTING JSP COMMANDS?
IS IT POSSIBLE?WHY WILL THIS HAPPEN?
I set the JAVA_HOME and CATALINA_HOME environment to the jdk and tomcat folders resp.
Is there any other thing that I need to set in classpath? Should I have my project as a
WAR file in the webapps of TOMCAT or just a folder i.e. directory structure will fine? -
Installation Problem with APEX 3.1 on 11g
Hey,
I've a big problem with apex3.1 on 11g. Yesterday i wanted to install the new version, which i've downloaded from the oracle server. Furthermore i have followed the instructions by the documentation.
i executed:
1. apexins.sql FLOW_1 USERS TEMP /i/ Is that correct?
2. apxconf.sql
Do i have do remove the old version (3.0)?
Thanks for your help
Best Regards,
AndiHi Andrea,
I tried to reproduce this and could not.
I created a new 11.1.0.6 database on Oracle Enterprise Linux with character set WE8MSWIN1252. I even did this with an OS locale of Italian (and trust me, it was a struggle, as my Italian is about as weak as my German). The only thing that is different between my test and your configuration is the server OS.
I then installed APEX 3.1, tried it in browser language 'it' and 'en-us', but I could not reproduce the issue.
Can you think of anything atypical in your configuration, installation, or database parameter settings?
Joel -
Problem with WebLogic 10.3.3, Apache 2.2.3 and WebLogic Apache proxy plugin
I have a problem with using Apache 2.2.3 as a WebLogic SSL proxy. I have Apache 2.2 running and successfully configured an SSL cert, config in ssl.conf is...
<VirtualHost secure.daftdonkey.com>
# Setup SSL for secure.daftdonkey.com
ServerName secure.daftdonkey.com
SSLEngine On
SSLCertificateFile /oracle/secure/secure.daftdonkey.com.crt
SSLCertificateKeyFile /oracle/secure/secure.daftdonkey.com.key
SSLCertificateChainFile /oracle/secure/gd_bundle.crt
</VirtualHost>
This works fine
Now I want Apache to proxy requests to my WebLogic Server and secure them over SSL as well
e.g. a request to https://secure.daftdonkey.com/service goes to https://weblogic.internal.site/service
I have downloaded and configured the weblogic module and tested it handling traffic for HTTP and that worked, then I switched the WebLogic module to use SSL.
LoadModule weblogic_module modules/mod_wl.so
<IfModule mod_weblogic.c>
WebLogicHost weblogic.internal.site
WebLogicPort 16101
Debug ALL
SecureProxy ON
WLSSLWallet /oracle/secure/my-wallet
WLLogFile /tmp/wl-proxy.log
</IfModule>
<Location /service>
SetHandler weblogic-handler
</Location>
Starting Apache throws the error. I think this is my main problem, i've searched support.oracle.com and not found anything.
[Mon Jun 07 23:00:48 2010] [crit] (20014)Internal error: WL SSL Init failed for server: (null) on 0
but Apache starts... I get this error when I make a request to https://secure.daftdonkey.com/service
Failure of server APACHE bridge:
No backend server available for connection: timed out after 10 seconds or idempotent set to OFF.
Looking into the log /tmp/wl-proxy.log I see....
Mon Jun 7 22:30:10 2010 <393212759749971> URLfactory Created
Mon Jun 7 22:30:10 2010 <393312759750102> ================New Request: [GET /service HTTP/1.1] =================
Mon Jun 7 22:30:10 2010 <393312759750102> INFO: SSL is configured
Mon Jun 7 22:30:10 2010 <393312759750102> Using Uri /service
Mon Jun 7 22:30:10 2010 <393312759750102> After trimming path: '/service'
Mon Jun 7 22:30:10 2010 <393312759750102> The final request string is '/service'
Mon Jun 7 22:30:10 2010 <393312759750102> parseServerList: Socket Address hostnames 'weblogic.internal.site:16101'
Mon Jun 7 22:30:10 2010 <393312759750102> Host extracted from serverlist is [weblogic.internal.site]
Mon Jun 7 22:30:10 2010 <393312759750102> parseServerList: IP from socket Address [192.168.100.15]
Mon Jun 7 22:30:10 2010 <393312759750102> Initializing lastIndex=0 for a list of length=1
Mon Jun 7 22:30:10 2010 <393312759750102> getListNode: created a new server node: id='weblogic.internal.site:16101' server_name='secure.daftdonkey.com', port='443'
Mon Jun 7 22:30:10 2010 <393312759750102> attempt #0 out of a max of 5
Mon Jun 7 22:30:10 2010 <393312759750102> Trying a pooled connection for '192.168.100.15/16101/16101'
Mon Jun 7 22:30:10 2010 <393312759750102> getPooledConn: found a host and port/securePort match
Mon Jun 7 22:30:10 2010 <393312759750102> getPooledConn: No more connections in the pool for Host[192.168.100.15] Port[16101] SecurePort[16101]
Mon Jun 7 22:30:10 2010 <393312759750102> general list: trying connect to '192.168.100.15'/16101/16101 at line 3188 for '/service'
Mon Jun 7 22:30:10 2010 <393312759750102> SSL is not configured for this connection
Mon Jun 7 22:30:10 2010 <393312759750102> Local Port of the socket is 45580
Mon Jun 7 22:30:10 2010 <393312759750102> Remote Host 192.168.100.15 Remote Port 16101
Mon Jun 7 22:30:10 2010 <393312759750102> URL::connect SSLConn for reader is not set as it is NULL
Mon Jun 7 22:30:10 2010 <393312759750102> general list: created a new connection to '192.168.100.15'/16101 for '/service', Local port:0
Mon Jun 7 22:30:10 2010 <393312759750102> Hdrs from clnt:[Host]=[secure.daftdonkey.com]
Mon Jun 7 22:30:10 2010 <393312759750102> Hdrs from clnt:[User-Agent]=[Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US; rv:1.9.1.9) Gecko/20100315 Firefox/3.5.9 ( .NET CLR 3.5.30729)]
Mon Jun 7 22:30:10 2010 <393312759750102> Hdrs from clnt:[Accept]=[text/html,application/xhtml+xml,application/xml;q=0.9,*/*;q=0.8]
Mon Jun 7 22:30:10 2010 <393312759750102> Hdrs from clnt:[Accept-Language]=[en-us,en;q=0.5]
Mon Jun 7 22:30:10 2010 <393312759750102> Hdrs from clnt:[Accept-Encoding]=[gzip,deflate]
Mon Jun 7 22:30:10 2010 <393312759750102> Hdrs from clnt:[Accept-Charset]=[ISO-8859-1,utf-8;q=0.7,*;q=0.7]
Mon Jun 7 22:30:10 2010 <393312759750102> Hdrs from clnt:[Keep-Alive]=[300]
Mon Jun 7 22:30:10 2010 <393312759750102> Hdrs from clnt:[Connection]=[keep-alive]
Mon Jun 7 22:30:10 2010 <393312759750102> parse_header is done
Mon Jun 7 22:30:10 2010 <393312759750102> Method is GET
Mon Jun 7 22:30:10 2010 <393312759750102> About to call parseHeaders
Mon Jun 7 22:30:10 2010 <393312759750102> URL::parseHeaders: Value of parsedHeaders = [0]
Mon Jun 7 22:30:10 2010 <393312759750102> URL::sendHeaders(): meth='GET' file='/service' protocol='HTTP/1.1'
Mon Jun 7 22:30:10 2010 <393312759750102> Hdrs to WLS: [Host]=[secure.daftdonkey.com]
Mon Jun 7 22:30:10 2010 <393312759750102> Hdrs to WLS: [User-Agent]=[Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US; rv:1.9.1.9) Gecko/20100315 Firefox/3.5.9 ( .NET CLR 3.5.30729)]
Mon Jun 7 22:30:10 2010 <393312759750102> Hdrs to WLS: [Accept]=[text/html,application/xhtml+xml,application/xml;q=0.9,*/*;q=0.8]
Mon Jun 7 22:30:10 2010 <393312759750102> Hdrs to WLS: [Accept-Language]=[en-us,en;q=0.5]
Mon Jun 7 22:30:10 2010 <393312759750102> Hdrs to WLS: [Accept-Encoding]=[gzip,deflate]
Mon Jun 7 22:30:10 2010 <393312759750102> Hdrs to WLS: [Accept-Charset]=[ISO-8859-1,utf-8;q=0.7,*;q=0.7]
Mon Jun 7 22:30:10 2010 <393312759750102> Hdrs to WLS: [Keep-Alive]=[300]
Mon Jun 7 22:30:10 2010 <393312759750102> Hdrs to WLS: [Connection]=[Keep-Alive]
Mon Jun 7 22:30:10 2010 <393312759750102> Hdrs to WLS: [WL-Proxy-SSL]=[true]
Mon Jun 7 22:30:10 2010 <393312759750102> Hdrs to WLS: [WL-Proxy-Client-IP]=[192.168.100.245]
Mon Jun 7 22:30:10 2010 <393312759750102> Hdrs to WLS: [Proxy-Client-IP]=[192.168.100.245]
Mon Jun 7 22:30:10 2010 <393312759750102> Hdrs to WLS: [X-Forwarded-For]=[192.168.100.245]
Mon Jun 7 22:30:10 2010 <393312759750102> Hdrs to WLS: [X-WebLogic-KeepAliveSecs]=[30]
Mon Jun 7 22:30:10 2010 <393312759750102> Hdrs to WLS: [X-WebLogic-Force-JVMID]=[unset]
Mon Jun 7 22:30:10 2010 <393312759750102> Reader::fill(): first=0 last=0 toRead=4096
Mon Jun 7 22:30:10 2010 <393312759750102> Reader::fill(): sysRecv returned -1
Mon Jun 7 22:30:10 2010 <393312759750102> *******Exception type [READ_ERROR_FROM_SERVER] (socket read failure) raised at line 251 of ../nsapi/Reader.cpp
Mon Jun 7 22:30:10 2010 <393312759750102> caught exception in readStatus: READ_ERROR_FROM_SERVER [os error=104, line 251 of ../nsapi/Reader.cpp]: socket read failure at line 963
Mon Jun 7 22:30:10 2010 <393312759750102> PROTOCOL_ERROR: Backend Server not responding - isRecycled:0
Mon Jun 7 22:30:10 2010 <393312759750102> Marking 192.168.100.15:16101 as bad
Mon Jun 7 22:30:10 2010 <393312759750102> got exception in sendRequest phase: Backend Server not responding at line 3702
Mon Jun 7 22:30:10 2010 <393312759750102> Failing over after sendRequest() exception: PROTOCOL_ERROR as Idempotent is set to ON
Mon Jun 7 22:30:10 2010 <393312759750102> attempt #1 out of a max of 5
However connecting directly to https://192.168.100.15:16101/irm_rights is successful.
Ouput from orapki seems to show a valid wallet.
[root@content my-wallet]# /oracle/install/bin/orapki wallet display -wallet /oracle/secure/my-wallet/
Oracle PKI Tool : Version 11.1.1.2.0
Copyright (c) 2004, 2009, Oracle and/or its affiliates. All rights reserved.
Requested Certificates:
User Certificates:
Trusted Certificates:
Subject: OU=Class 2 Public Primary Certification Authority,O=VeriSign\, Inc.,C=US
Subject: OU=Secure Server Certification Authority,O=RSA Data Security\, Inc.,C=US
Subject: OU=Class 3 Public Primary Certification Authority,O=VeriSign\, Inc.,C=US
Subject: OU=Class 1 Public Primary Certification Authority,O=VeriSign\, Inc.,C=US
Subject: CN=weblogic.internal.site,OU=FOR TESTING ONLY,O=MyOrganization,L=MyTown,ST=MyState,C=US
Subject: CN=GTE CyberTrust Global Root,OU=GTE CyberTrust Solutions\, Inc.,O=GTE Corporation,C=US
Also the apache log at /var/log/httpd/ssl_error_log shows.
[Mon Jun 07 23:59:03 2010] [error] [client 192.168.100.245] ap_proxy: trying GET /service/ at backend host '192.168.100.15/16101; got exception 'Backend Server not responding'
[Mon Jun 07 23:59:03 2010] [error] [client 192.168.100.245] ap_proxy: trying GET /service/ at backend host '192.168.100.15/16101; got exception 'Backend Server not responding'
[Mon Jun 07 23:59:03 2010] [error] [client 192.168.100.245] ap_proxy: trying GET /service/ at backend host '192.168.100.15/16101; got exception 'Backend Server not responding'
[Mon Jun 07 23:59:03 2010] [error] [client 192.168.100.245] ap_proxy: trying GET /service/ at backend host '192.168.100.15/16101; got exception 'Backend Server not responding'
[Mon Jun 07 23:59:03 2010] [error] [client 192.168.100.245] ap_proxy: trying GET /service/ at backend host '192.168.100.15/16101; got exception 'Backend Server not responding'
[Mon Jun 07 23:59:03 2010] [error] [client 192.168.100.245] ap_proxy: trying GET /service/ at backend host '192.168.100.15/16101; got exception 'Backend Server not responding'
Editing the httpd.conf and sending traffic from Apache to WebLogic over regular HTTP works, config is...
LoadModule weblogic_module modules/mod_wl.so
<IfModule mod_weblogic.c>
WebLogicHost weblogic.internal.site
WebLogicPort 16100
Debug ALL
# SecureProxy ON
# WLSSLWallet /oracle/secure/my-wallet
WLLogFile /tmp/wl-proxy.log
</IfModule>
Resulting detail from /tmp/wl-proxy.log
Mon Jun 7 23:20:50 2010 <415912759780351> URLfactory Created
Mon Jun 7 23:20:50 2010 <416012759780502> ================New Request: [GET /service/ HTTP/1.1] =================
Mon Jun 7 23:20:50 2010 <416012759780502> Using Uri /service/
Mon Jun 7 23:20:50 2010 <416012759780502> After trimming path: '/service/'
Mon Jun 7 23:20:50 2010 <416012759780502> The final request string is '/service/'
Mon Jun 7 23:20:50 2010 <416012759780502> parseServerList: Socket Address hostnames 'weblogic.internal.site:16100'
Mon Jun 7 23:20:50 2010 <416012759780502> Host extracted from serverlist is [weblogic.internal.site]
Mon Jun 7 23:20:50 2010 <416012759780502> parseServerList: IP from socket Address [192.168.100.15]
Mon Jun 7 23:20:50 2010 <416012759780502> Initializing lastIndex=0 for a list of length=1
Mon Jun 7 23:20:50 2010 <416012759780502> getListNode: created a new server node: id='weblogic.internal.site:16100' server_name='secure.daftdonkey.com', port='443'
Mon Jun 7 23:20:50 2010 <416012759780502> attempt #0 out of a max of 5
Mon Jun 7 23:20:50 2010 <416012759780502> Trying a pooled connection for '192.168.100.15/16100/16100'
Mon Jun 7 23:20:50 2010 <416012759780502> getPooledConn: found a host and port/securePort match
Mon Jun 7 23:20:50 2010 <416012759780502> getPooledConn: No more connections in the pool for Host[192.168.100.15] Port[16100] SecurePort[16100]
Mon Jun 7 23:20:50 2010 <416012759780502> general list: trying connect to '192.168.100.15'/16100/16100 at line 3188 for '/service/'
Mon Jun 7 23:20:50 2010 <416012759780502> SSL is not configured for this connection
Mon Jun 7 23:20:50 2010 <416012759780502> Local Port of the socket is 56647
Mon Jun 7 23:20:50 2010 <416012759780502> Remote Host 192.168.100.15 Remote Port 16100
Mon Jun 7 23:20:50 2010 <416012759780502> URL::connect SSLConn for reader is not set as it is NULL
Mon Jun 7 23:20:50 2010 <416012759780502> general list: created a new connection to '192.168.100.15'/16100 for '/service/', Local port:0
Mon Jun 7 23:20:50 2010 <416012759780502> Hdrs from clnt:[Host]=[secure.daftdonkey.com]
Mon Jun 7 23:20:50 2010 <416012759780502> Hdrs from clnt:[User-Agent]=[Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US; rv:1.9.1.9) Gecko/20100315 Firefox/3.5.9 ( .NET CLR 3.5.30729)]
Mon Jun 7 23:20:50 2010 <416012759780502> Hdrs from clnt:[Accept]=[text/html,application/xhtml+xml,application/xml;q=0.9,*/*;q=0.8]
Mon Jun 7 23:20:50 2010 <416012759780502> Hdrs from clnt:[Accept-Language]=[en-us,en;q=0.5]
Mon Jun 7 23:20:50 2010 <416012759780502> Hdrs from clnt:[Accept-Encoding]=[gzip,deflate]
Mon Jun 7 23:20:50 2010 <416012759780502> Hdrs from clnt:[Accept-Charset]=[ISO-8859-1,utf-8;q=0.7,*;q=0.7]
Mon Jun 7 23:20:50 2010 <416012759780502> Hdrs from clnt:[Keep-Alive]=[300]
Mon Jun 7 23:20:50 2010 <416012759780502> Hdrs from clnt:[Connection]=[keep-alive]
Mon Jun 7 23:20:50 2010 <416012759780502> Hdrs from clnt:[Cookie]=[JSESSIONID=YF4nMNfZ3lJ5ZrVV9HGpKwj3hf12yRvlf4zksQf6pkKx2LhJ2ywY!34167467]
Mon Jun 7 23:20:50 2010 <416012759780502> parse_header is done
Mon Jun 7 23:20:50 2010 <416012759780502> Method is GET
Mon Jun 7 23:20:50 2010 <416012759780502> About to call parseHeaders
Mon Jun 7 23:20:50 2010 <416012759780502> URL::parseHeaders: Value of parsedHeaders = [0]
Mon Jun 7 23:20:50 2010 <416012759780502> URL::sendHeaders(): meth='GET' file='/service/' protocol='HTTP/1.1'
Mon Jun 7 23:20:50 2010 <416012759780502> Hdrs to WLS: [Host]=[secure.daftdonkey.com]
Mon Jun 7 23:20:50 2010 <416012759780502> Hdrs to WLS: [User-Agent]=[Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US; rv:1.9.1.9) Gecko/20100315 Firefox/3.5.9 ( .NET CLR 3.5.30729)]
Mon Jun 7 23:20:50 2010 <416012759780502> Hdrs to WLS: [Accept]=[text/html,application/xhtml+xml,application/xml;q=0.9,*/*;q=0.8]
Mon Jun 7 23:20:50 2010 <416012759780502> Hdrs to WLS: [Accept-Language]=[en-us,en;q=0.5]
Mon Jun 7 23:20:50 2010 <416012759780502> Hdrs to WLS: [Accept-Encoding]=[gzip,deflate]
Mon Jun 7 23:20:50 2010 <416012759780502> Hdrs to WLS: [Accept-Charset]=[ISO-8859-1,utf-8;q=0.7,*;q=0.7]
Mon Jun 7 23:20:50 2010 <416012759780502> Hdrs to WLS: [Keep-Alive]=[300]
Mon Jun 7 23:20:50 2010 <416012759780502> Hdrs to WLS: [Cookie]=[JSESSIONID=YF4nMNfZ3lJ5ZrVV9HGpKwj3hf12yRvlf4zksQf6pkKx2LhJ2ywY!34167467]
Mon Jun 7 23:20:50 2010 <416012759780502> Hdrs to WLS: [Connection]=[Keep-Alive]
Mon Jun 7 23:20:50 2010 <416012759780502> Hdrs to WLS: [WL-Proxy-SSL]=[true]
Mon Jun 7 23:20:50 2010 <416012759780502> Hdrs to WLS: [WL-Proxy-Client-IP]=[192.168.100.245]
Mon Jun 7 23:20:50 2010 <416012759780502> Hdrs to WLS: [Proxy-Client-IP]=[192.168.100.245]
Mon Jun 7 23:20:50 2010 <416012759780502> Hdrs to WLS: [X-Forwarded-For]=[192.168.100.245]
Mon Jun 7 23:20:50 2010 <416012759780502> Hdrs to WLS: [X-WebLogic-KeepAliveSecs]=[30]
Mon Jun 7 23:20:50 2010 <416012759780502> Hdrs to WLS: [X-WebLogic-Force-JVMID]=[unset]
Mon Jun 7 23:20:50 2010 <416012759780502> Reader::fill(): first=0 last=0 toRead=4096
Mon Jun 7 23:20:50 2010 <416012759780502> Reader::fill(): sysRecv returned 568
Mon Jun 7 23:20:50 2010 <416012759780502> URL::parseHeaders: CompleteStatusLine set to [HTTP/1.1 302 Moved Temporarily]
Mon Jun 7 23:20:50 2010 <416012759780502> URL::parseHeaders: StatusLine set to [302 Moved Temporarily]
Mon Jun 7 23:20:50 2010 <416012759780502> Hdrs from WLS:[Date]=[Tue, 08 Jun 2010 06:20:50 GMT]
Mon Jun 7 23:20:50 2010 <416012759780502> Hdrs from WLS:[Transfer-Encoding]=[chunked]
Mon Jun 7 23:20:50 2010 <416012759780502> Hdrs from WLS:[Location]=[https://secure.daftdonkey.com/service/faces/LoginPage.jspx]
Mon Jun 7 23:20:50 2010 <416012759780502> Hdrs from WLS:[X-WebLogic-JVMID]=[34167467]
Mon Jun 7 23:20:50 2010 <416012759780502> Hdrs from WLS:[X-Powered-By]=[Servlet/2.5 JSP/2.1]
Mon Jun 7 23:20:50 2010 <416012759780502> parsed all headers OK
Mon Jun 7 23:20:50 2010 <416012759780502> done with sendRequest
Mon Jun 7 23:20:50 2010 <416012759780502> sendResponse() : r->status = '302'
Mon Jun 7 23:20:50 2010 <416012759780502> Hdrs to client (add):[Date]=[Tue, 08 Jun 2010 06:20:50 GMT]
Mon Jun 7 23:20:50 2010 <416012759780502> Hdrs to client (add):[Location]=[https://secure.daftdonkey.com/service/faces/LoginPage.jspx]
Mon Jun 7 23:20:50 2010 <416012759780502> for 192.168.100.15/16100/16100, updated JVMID: 34167467
Mon Jun 7 23:20:50 2010 <416012759780502> Hdrs to client (add):[X-Powered-By]=[Servlet/2.5 JSP/2.1]
Mon Jun 7 23:20:50 2010 <416012759780502> calling closeConn() with non-null URL* at 3826
Mon Jun 7 23:20:50 2010 <416012759780502> canRecycle: conn=1 status=302 isKA=1 clen=-1 isCTE=1
Mon Jun 7 23:20:50 2010 <416012759780502> closeConn: pooling for '192.168.100.15/16100'
Mon Jun 7 23:20:50 2010 <416012759780502> closeConn: pooling '0'
Mon Jun 7 23:20:50 2010 <416012759780502> request [irm_rights/] processed successfully..................
Mon Jun 7 23:20:50 2010 <415912759780351> Cleaning up the list node 'weblogic.internal.site:16100'list Length '1'I found the answer to this. The documentation is not clear enough, LD_LIBRARY_PATH MUST be set and MUST have a pointer to the directory where the SSL .so modules are. I wrote up a blog article explaining the configuration and detailed this issue.
http://blogs.oracle.com/irm/2010/06/quick_guide_to_oracle_irm_11g_1.html -
Cisco ASA 5505 - problem with ssh, icmp on OUTSIDE interface
Hi all,
I have a very strange problem with OUTSIDE interface and remote ssh. Well, I have followed documentation and configure remote access for ssh like this [1.]. If I want to connect from internet to OUTSIDE interface [2.] get no response and in log I can see this message [3.]. I really do not understand why is ssh connection dropped by OUTSIDE access-list [4.]? If I understand documentation correctly there is no impact for remote mangement/access like icmp, ssh, http(s) by interface access-list. So, why?
When I try ssh connection form internal network to INSIDE interface everything works fine and I can log in to ASA. If I try allow ssh in OUTSIDE access-list still no success and a get this message [5.]? It is strange, isn't?
The same problem with icmp if I want to "ping" OUTSIDE interface from internet a get thish message in log [6.] and configuration for ICMP like this [7.].
Full ASA config is in attachment.
Can anybody help how to fix it and explain what is exactly wrong.Thanks.
Regards,
Karel
[1.]
ssh stricthostkeycheck
ssh 10.0.0.0 255.255.255.0 INSIDE
ssh 0.0.0.0 0.0.0.0 OUTSIDE
ssh timeout 60
ssh version 2
ssh key-exchange group dh-group1-sha1
ASA-FW01# show ssh
Timeout: 60 minutes
Version allowed: 2
10.0.0.0 255.255.255.0 INSIDE
0.0.0.0 0.0.0.0 OUTSIDE
[2.]
ASA-FW01# show nameif
Interface Name Security
Vlan10 INSIDE 100
Vlan20 EXT-VLAN20 0
Vlan30 EXT-WIFI-VLAN30 10
Vlan100 OUTSIDE 0
ASA-FW01# show ip
System IP Addresses:
Interface Name IP address Subnet mask Method
Vlan10 INSIDE 10.0.0.1 255.255.255.0 CONFIG
Vlan20 EXT-VLAN20 10.0.1.1 255.255.255.0 CONFIG
Vlan30 EXT-WIFI-VLAN30 10.0.2.1 255.255.255.0 CONFIG
Vlan100 OUTSIDE 85.71.188.158 255.255.255.255 CONFIG
Current IP Addresses:
Interface Name IP address Subnet mask Method
Vlan10 INSIDE 10.0.0.1 255.255.255.0 CONFIG
Vlan20 EXT-VLAN20 10.0.1.1 255.255.255.0 CONFIG
Vlan30 EXT-WIFI-VLAN30 10.0.2.1 255.255.255.0 CONFIG
Vlan100 OUTSIDE 85.71.188.158 255.255.255.255 CONFIG
ASA-FW01# show interface OUTSIDE detail
Interface Vlan100 "OUTSIDE", is up, line protocol is up
Hardware is EtherSVI, BW 100 Mbps, DLY 100 usec
Description: >>VLAN pro pripojeni do internetu<<
MAC address f44e.05d0.6c17, MTU 1480
IP address 85.71.188.158, subnet mask 255.255.255.255
Traffic Statistics for "OUTSIDE":
90008 packets input, 10328084 bytes
60609 packets output, 13240078 bytes
1213 packets dropped
1 minute input rate 15 pkts/sec, 994 bytes/sec
[3.]
Jan 13 2015 06:45:30 ASA-FW01 : %ASA-6-106100: access-list OUTSIDE denied tcp OUTSIDE/193.86.236.70(46085) -> OUTSIDE/85.71.188.158(22) hit-cnt 1 first hit [0xb74026ad, 0x0]
[4.]
access-list OUTSIDE remark =======================================================================================
access-list OUTSIDE extended permit icmp any any echo-reply
access-list OUTSIDE extended deny ip any any log
access-group OUTSIDE in interface OUTSIDE
[5.]
Jan 12 2015 23:00:46 ASA-FW01 : %ASA-2-106016: Deny IP spoof from (193.86.236.70) to 85.71.188.158 on interface OUTSIDE
[6.]
Jan 13 2015 06:51:16 ASA-FW01 : %ASA-4-400014: IDS:2004 ICMP echo request from 193.86.236.70 to 85.71.188.158 on interface OUTSIDE
[7.]
icmp unreachable rate-limit 1 burst-size 1
icmp permit 10.0.0.0 255.0.0.0 INSIDE
icmp permit 10.0.0.0 255.0.0.0 EXT-WIFI-VLAN30
icmp permit any OUTSIDEYou're right that the ACL should not affect otherwise allowed communications to the interface address.
Try disabling the ip audit feature on your outside interface.
no ip audit interface OUTSIDE AP_OUTSIDE_INFO
no ip audit interface OUTSIDE AP_OUTSIDE_ATTACK -
Hi. I have an ASA 5505 configured for Transparent Mode. The Outside interface connects to a router (RV042). The router manages DHCP. With the 5505 in the system, all computers can connect to the internet and to each other, except for a few. The problem computers can be made to work if they are set to a specific address, rather than automatically assigned by the router. Some of the iPads work correctly, some do not. At least one Apple Notebook cannot connect even if I enter a static address.
Consulting the documentation, I found that DHCP traffic (UPD Port 67 and 68) needed to be enabled via rules for the Inside and Outside interfaces. I did that in ASDM but now nothing works.
I have pulled the 5505 out of the system and restored it to the configuration that worked for most of the computers.
Any suggestions would be appreciated. I can pull a "show" run from CLI if it is useful.
Thanks...Understood. I tried adding the "inside_out extended permit ip any any" command, but it made no difference. Because the implicit rule (permit ip traffic to any less secure interface) is still in the access list table, it would seem the additional extended rule is not needed.
When I first received the 5505, it had an older version of firmware. At the time, when I entered any rule in ASDM it deleted the "less secure" implicit rule, which then broke the system since there was no path for internet traffic from inside to outside, as you have stated. With the newest firmware release, however, when I enter a rule, the "less secure" implicit rule does not go away.
So, with help from the folks here I have made progress. Right now the issue is that when the 5505 in Transparent Mode is between the router and user computers, the computers cannot reliably get addresses that are auto-assigned by the router.
Looking through the logs displayed on ASDM, I noticed the following curious statement:
"6 Mar 31 2014 07:16:42 fe80::1131:41c2:3627:8339 63575 ff02::1:3 5355 No management IP address configured for transparent firewall. Dropping protocol UDP packet from outside:fe80::1131:41c2:3627:8339/63575 to inside:ff02::1:3/5355"
However, I have configured a management IP address, and it is listed in the "show" document that I posted yesterday:
interface BVI1
ip address 192.168.1.10 255.255.255.0
So, I am confused.
I appreciate the help. I am new to the 5505, although I participated as a "friendly" in the ASA program some years ago. I recall a similar problem with that setup. Regrettably, I can't remember how we fixed it...
Regards...
Maybe you are looking for
-
I'm setting up an htpc and I can not get xrandr to allow me to set the resolution I want. I want either 1280x720 or 1366x768 (monitors recommended resolution through pc output on it). Currently its hooked up through hdmi, so I would like to set the
-
Dedicated SolMan required for ...?
Hi, i have a question which i was not able to answer by reading guides or searching in the sdn, so maybe there is not such a question in this forum already or i am blind. My question is: As it is finally possible to use a SolMan for totally different
-
How can an ipad be hooked up to projecor?
how can an ipad be hooked up to projecor?
-
Hi, I have been putting links to jar files on my website, and I just decided to use java web start because Internet Explorer tries to download jars as zip files. Here are the directions I found on the site: http://java.sun.com/developer/technicalArti
-
VA41, Vers. 4.5 : does the management of the text exist in the tab "Sale"s
In the SAP Version 4.5, does the management of the text exist in the tab "Sale" for the transactionVA41 ? I'm sure that it exists in version 4.7. Thank you in advance.