Documentation repository configuration

Hi Experts,
I am currently looking for configuring the document repository in SolMan. is there any document or implementation guide available for this?

Hi
https://websmp110.sap-ag.de/~sapdownload/011000358700002006042008E/HowTo_Impl_Bus_Proc.pdf
for manual processes you can directly write the name in Structure tab and save it.
then you can upload doc in proj doc...
i hop prb is solved.
Regards
Prakhar

Similar Messages

Solution Manager as documention repository?

Hi,
We're planning to configure our Sol Man as documentation repository wherein we will transfer all the files in our shared drive to the Solution Manager. However, I'm not sure if this is possible or not. If yes, kindly provide me the link or files that would help me in the configuration.
Thanks,
Carter

Hi,
SAP Solution Manager is a centralized, robust solution management toolset that facilitates technical support for distributed systems -- with functionality that covers all key aspects of solution deployment, operation, and continuous improvement. It combines tools, content, and direct access to SAP to increase the reliability of solutions and lower total cost of ownership.
First of all create a project in solar_project_admin.
Secondly create the scenarios or recongnize the process in solar01.
Here you can upload all the doc in solar01 project doc tab.
http://service.sap.com/rkt-solman
and go to solution manager4.0 technical settings.
Visit the following links also in addition to above.
http://www.saphosting.com/partners/Change%20Request%20Management.pdf
http://www.asug.com/client_files/Calendar/Upload/Best%20practices%20in%20project%20management%20-%20Indiana%20ASUG%20June%202005.PPT
http://www.sap.com/services/pdf/BWP_SB_SAP_Solution_Manager.pdf
http://eiisolutions.net/files/Evolution%20of%20SAP%20Implementation%20Environments%20White%20paper.pdf
http://www.saphosting.com/partners/Service%20Desk.pdf
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/webcontent/uuid/16eaf8ea-0c01-0010-c1af-b3febfa33574 [original link is broken]
view the following threads,
/people/community.user/blog/2006/12/07/organize-and-perform-testing-using-solution-manager
/people/luisfelipe.lanz/blog/2006/02/07/installing-a-solution-manager-diagnostics-the-easy-way
/people/federico.babelis2/blog/2006/05/03/solution-manager-cen-and-alerting-configuration-guide-for-dummies
/people/federico.babelis2/blog/2006/04/26/ccms-rule-based-monitors-configuration-guide-for-dummies
/people/federico.babelis2/blog/2006/04/25/system-monitoring-configuration-guide-for-dummies
/people/kamran.ellahi2/blog/2006/01/13/setting-up-sap-service-desk-123-and-go
/people/sapna.modi/blog/2007/04/20/sap-solution-manager--a-concern-area
Feel free to ask further.
Please reward points.
Message was edited by:
Prakhar Saxena

OBIEE 11g installation failed multiple times at Distributing Repository Configuration Step

Hi,
I am getting the following error during the Distributing Repository Configuration step in the OBIEE 11g 11.1.1.7 enterprise installation in Windows 8 system.
Severe: Element Type:Domain
Element id: null
Operation result: failed to obtain domain file lock
Detail Message: java.util.concurrent.timeoutException.Timeout;
waiting for lock: Domain config lock;
c:\OBIEE\MIDDLE~1\USER_p~1\domains\EAM_DO~1\config\FMWCON~1\biee-config.lock;[121 secs]
Step Distributing Repository failed
Configuration Action 'Distributing Repository' has failed. Please check logs for details.
Step Distributing repository failed
I checked another blog for this https://forums.oracle.com/thread/2565716 and even there the explanation doesn't convince me.
I tried to look at the Locale of my system where I am installing and I could see it is using Eng-Us by default. One way suggested to check the Unicode format from the web browser and I could check that too to be UTF-8 as suggested by someone on some other blog.
I checked in the logs too as suggested by the Installation dialogue box but it didn't seem much conclusive too.
Here is the snapshot of the log file which I could found.
INFO: Current Inventory:
Oracle Home: OraDb11g_home1
This Oracle Home has not been changed in this session.
Oracle Home: OH1858390736
This Oracle Home has not been changed in this session.
Oracle Home: OH440082373
This Oracle Home has not been changed in this session.
Oracle Home: OH440082374
This Oracle Home has not been changed in this session.
Oracle Home: OH1597391518
This Oracle Home has not been changed in this session.
Oracle Home: OH1285215443
This Oracle Home has not been changed in this session.
INFO: Ending the inventory Session
INFO: Using an existing InstallAreaControl for this Inventory Session with existing access level 1
INFO: Using an existing InstallAreaControl for this Inventory Session with existing access level 1
INFO: Using an existing InstallAreaControl for this Inventory Session with existing access level 1
INFO: The ORACLE_CONFIG_HOME env var is set to
INFO: The ORACLE_CONFIG_HOME env var is set to
INFO: The ORACLE_CONFIG_HOME env var is set to
INFO: The ORACLE_CONFIG_HOME env var is set to
INFO: The ORACLE_CONFIG_HOME env var is set to
INFO: The ORACLE_CONFIG_HOME env var is set to
INFO: The ORACLE_CONFIG_HOME env var is set to
INFO: The ORACLE_CONFIG_HOME env var is set to
INFO: The ORACLE_CONFIG_HOME env var is set to
INFO: The ORACLE_CONFIG_HOME env var is set to
INFO: The ORACLE_CONFIG_HOME env var is set to
INFO: The ORACLE_CONFIG_HOME env var is set to
INFO: The ORACLE_CONFIG_HOME env var is set to
INFO: The ORACLE_CONFIG_HOME env var is set to
INFO: The ORACLE_CONFIG_HOME env var is set to
INFO: The ORACLE_CONFIG_HOME env var is set to
Can someone please help me with this since I am stuck with for quite some time now.
Is there any way to check in command prompt to check the locale as required by the system.
What could be the issue here?
Thanks,
Nitin

Hi all,
We are able to resolve the above issue with the below solution.
Root cause of the issue:
You may have a temp directory in the path C:\Documents and Settings\user_name\Local Settings\Temp. You got the above mentioned exception because of the temp directory path having spaces_+ in it.
Solution:
1. Create a new directory called TEMP in a different location for ex: C:\TEMP
2. Now, Right click on My computer --> Properties --> Advanced --> click on Environment Variables.
3. You should be having TEMP and TMP as variables under user variables section pointing to the C:\Documents and Settings\user_name\Local Settings\Temp path.
4. Edit the TEMP and TMP variables and mention C:\TEMP in the variable value.
5. Deinstall and re-install OBIEE 11g.
Happy OBIEE 11g installation!!
Thanks,
Rajesh Gurram

Metadata Manager Repository configuration failed

Hello,
I am tring to install Metadata Manager. I am running BOE XI 3.1 SP2 FP2.5. I am installing "SBOP Metadata Management XI 3.1 (12.1) on Windows". My database is a local install of MS SQL Server 2005.
I get all the way through the install process and the following error message pops up:
Metadata Management Repository configuration failed with the following error.
The TCP/IP connection to the host has failed. java.net.ConnectException: Connection refused: connect
The TCP/IP connection to the host has failed. java.net.ConnectException: Connection refused: connect
SQLSTATE=08S01, SQLCODE=0.
Utility failed with code 4.
You need to re-run the installer again.
Once I click the "OK" button, the install reverses and uninstalls everything.
Any help would be greatly appreciated.
Thank you,
Scott

how are you specifying the SQL Server 2005 server name in the repository configuration screen ?
are you able to ping the machine where SQL Server is running ?
you have to give the Machine Name or IP address in the Repository connection screen, don't give machine\instanceName

Grid Control 11g step Repository Configuration running for 24 hours+

Got through all the prerequisites and am installing GC 11g on an Oracle Linux 5 machine which is also running my repository database instance (11.2.0.1). The GC install went rather smoothly until I hit the 'Repository Configuration' step. It's been sitting there for over a day.
It does look like it's doing something as running a
select count(*) from dba_objects where owner = 'SYSMAN';
the number creeps up.. slowly.. sometimes.. right now it's at 5888.
No errors in the GC install error log. every half hour or so I am seeing a 'Warning inbound connection timed out ORA-3136' error in my database alert log. I tried setting my inbound_connection_timeout in my listener to 0 as well as updating the sqlnet.ora file, but i still get these now and again. GC doesn't seem to notice or mind. There is nothing else running on this machine (Dell Optiplex 755 4Gb ram 2 cpus).
I'm just trying to get a feel for how the install is and get familiar with the 11g GC before upgrading our 10g GC..
any ideas?

fwiw I am seeing some dismal performance running DDL in the sysman schema..
for instance in the following example creating a table in the sys schema happens instantly, as does dropping it.. creating the same table in sysman takes about 50 seconds and dropping the table takes about 15 seconds.. weird, eh?
SQL*Plus: Release 11.2.0.1.0 Production on Thu Oct 21 11:25:37 2010
Copyright (c) 1982, 2009, Oracle. All rights reserved.
SQL> connect / as sysdba
Connected.
SQL> create table x (a varchar2(20), b number(12));
Table created.
SQL> drop table x;
Table dropped.
SQL> create table sysman.x (a varchar2(20), b number(12));
Table created.
SQL> drop table sysman.x;
Table dropped.

Documenting GTS Configuration

GTS Experts,
What is the best practice for documenting the configuration settings in GTS? Are there system reports available to control and report this, or is it expected that this information is kept manually in spreadsheets?
Also, what is best practice for system instance cutover, to ensure anyting not on a transport is put in the new system the same as the previous systm. Is there a compare functionality to identify deltas between the instances that need to be addressed?
Thank you!

Hi,
as far as i know there is not such report which would download all customizing settings/views into the excel file. Actually, that would be a quite useful mass function.
For your second question, check transactions SCU0 and SCMP. Here you can compare settings between systems connected via RFC.
http://www.sap-img.com/bc005.htm
@Your RFC user would need S_TABU_RFC autorization.
BR,
Gabriel.

A self documenting DSC Configuration wich contains all Resources

One funny thing with PowerShell is allways: It can document himself.
Inspired by Steven Murawskis video on Desired State Configuration (DSC) I have done a full Blowen full self documenting DSC Configuration:
Not perfect but it works for the first shot...
This code:
$ConfigOut = @"
Configuration Name {
param(
[String]`$Parameter1
# One can evaluate expression
# E.g.: `$AllNodes.Where("Role -eq Web").NodeName
Node ('Node1','Node2','Node3') {
$(
Get-DscResource | ForEach {
"`n`t`t# Call the '$($_.Name)' Resource the Provider`n"
"`t`t$($_.Name) FriendlyName {`n`n"
"`t`t`t# Possible Resource Options`n"
$Ofs = "','"
$_.Properties | ForEach {
"`t`t`t$($_.Name) = '$($_.Values)' # Type:$($_.PropertyType) $(If($_.IsMandatory) {'is Mandatory!'})`n"
$Ofs = ' '
"`t`t}`n"
} # end Node
} # end Configuration
$ConfigOut
Produces this output on my Windows 8.1:
Configuration Name {
param(
[String]$Parameter1
# One can evaluate expression
# E.g.: $AllNodes.Where("Role -eq Web").NodeName
Node ('Node1','Node2','Node3') {
# Call the 'File' Resource the Provider
File FriendlyName {
# Possible Resource Options
DestinationPath = '' # Type:[string] is Mandatory!
Attributes = 'Archive','Hidden','ReadOnly','System' # Type:[string[]]
Checksum = 'CreatedDate','ModifiedDate','SHA-1','SHA-256','SHA-512' # Type:[string]
Contents = '' # Type:[string]
Credential = '' # Type:[PSCredential]
DependsOn = '' # Type:[string[]]
Ensure = 'Absent','Present' # Type:[string]
Force = '' # Type:[bool]
MatchSource = '' # Type:[bool]
Recurse = '' # Type:[bool]
SourcePath = '' # Type:[string]
Type = 'Directory','File' # Type:[string]
# Call the 'Archive' Resource the Provider
Archive FriendlyName {
# Possible Resource Options
Destination = '' # Type:[string] is Mandatory!
Path = '' # Type:[string] is Mandatory!
Checksum = 'CreatedDate','ModifiedDate','SHA-1','SHA-256','SHA-512' # Type:[string]
DependsOn = '' # Type:[string[]]
Ensure = 'Absent','Present' # Type:[string]
Force = '' # Type:[bool]
Validate = '' # Type:[bool]
# Call the 'Environment' Resource the Provider
Environment FriendlyName {
# Possible Resource Options
Name = '' # Type:[string] is Mandatory!
DependsOn = '' # Type:[string[]]
Ensure = 'Absent','Present' # Type:[string]
Path = '' # Type:[bool]
Value = '' # Type:[string]
# Call the 'Group' Resource the Provider
Group FriendlyName {
# Possible Resource Options
GroupName = '' # Type:[string] is Mandatory!
Credential = '' # Type:[PSCredential]
DependsOn = '' # Type:[string[]]
Description = '' # Type:[string]
Ensure = 'Absent','Present' # Type:[string]
Members = '' # Type:[string[]]
MembersToExclude = '' # Type:[string[]]
MembersToInclude = '' # Type:[string[]]
# Call the 'Log' Resource the Provider
Log FriendlyName {
# Possible Resource Options
Message = '' # Type:[string] is Mandatory!
DependsOn = '' # Type:[string[]]
# Call the 'Package' Resource the Provider
Package FriendlyName {
# Possible Resource Options
Name = '' # Type:[string] is Mandatory!
Path = '' # Type:[string] is Mandatory!
ProductId = '' # Type:[string] is Mandatory!
Arguments = '' # Type:[string]
Credential = '' # Type:[PSCredential]
DependsOn = '' # Type:[string[]]
Ensure = 'Absent','Present' # Type:[string]
LogPath = '' # Type:[string]
ReturnCode = '' # Type:[UInt32[]]
# Call the 'Registry' Resource the Provider
Registry FriendlyName {
# Possible Resource Options
Key = '' # Type:[string] is Mandatory!
ValueName = '' # Type:[string] is Mandatory!
DependsOn = '' # Type:[string[]]
Ensure = 'Absent','Present' # Type:[string]
Force = '' # Type:[bool]
Hex = '' # Type:[bool]
ValueData = '' # Type:[string[]]
ValueType = 'Binary','Dword','ExpandString','MultiString','Qword','String' # Type:[string]
# Call the 'Script' Resource the Provider
Script FriendlyName {
# Possible Resource Options
GetScript = '' # Type:[string] is Mandatory!
SetScript = '' # Type:[string] is Mandatory!
TestScript = '' # Type:[string] is Mandatory!
Credential = '' # Type:[PSCredential]
DependsOn = '' # Type:[string[]]
# Call the 'Service' Resource the Provider
Service FriendlyName {
# Possible Resource Options
Name = '' # Type:[string] is Mandatory!
BuiltInAccount = 'LocalService','LocalSystem','NetworkService' # Type:[string]
Credential = '' # Type:[PSCredential]
DependsOn = '' # Type:[string[]]
StartupType = 'Automatic','Disabled','Manual' # Type:[string]
State = 'Running','Stopped' # Type:[string]
# Call the 'User' Resource the Provider
User FriendlyName {
# Possible Resource Options
UserName = '' # Type:[string] is Mandatory!
DependsOn = '' # Type:[string[]]
Description = '' # Type:[string]
Disabled = '' # Type:[bool]
Ensure = 'Absent','Present' # Type:[string]
FullName = '' # Type:[string]
Password = '' # Type:[PSCredential]
PasswordChangeNotAllowed = '' # Type:[bool]
PasswordChangeRequired = '' # Type:[bool]
PasswordNeverExpires = '' # Type:[bool]
# Call the 'WindowsFeature' Resource the Provider
WindowsFeature FriendlyName {
# Possible Resource Options
Name = '' # Type:[string] is Mandatory!
Credential = '' # Type:[PSCredential]
DependsOn = '' # Type:[string[]]
Ensure = 'Absent','Present' # Type:[string]
IncludeAllSubFeature = '' # Type:[bool]
LogPath = '' # Type:[string]
Source = '' # Type:[string]
# Call the 'WindowsProcess' Resource the Provider
WindowsProcess FriendlyName {
# Possible Resource Options
Arguments = '' # Type:[string] is Mandatory!
Path = '' # Type:[string] is Mandatory!
Credential = '' # Type:[PSCredential]
DependsOn = '' # Type:[string[]]
Ensure = 'Absent','Present' # Type:[string]
StandardErrorPath = '' # Type:[string]
StandardInputPath = '' # Type:[string]
StandardOutputPath = '' # Type:[string]
WorkingDirectory = '' # Type:[string]
} # end Node
} # end Configuration
Watch:
Steven Murawskis and Joel Bennett: Video on Desired State Configuration (DSC)
http://www.youtube.com/watch?v=EN8eJA9rpXw
hope this helps....
PowerShell Artikel, Buchtipps und kostenlose PowerShell Tutorials + E-Books
auf der deutschsprachigen PowerShell Community
Mein 21 Teiliger PowerShell Video Grundlehrgang
Deutsche PowerShell Videos auf Youtube
Folge mir auf:
Twitter |
Facebook |
Google+

One funny thing with PowerShell is allways: It can document himself.
Inspired by Steven Murawskis video on Desired State Configuration (DSC) I have done a full Blowen full self documenting DSC Configuration:
Not perfect but it works for the first shot...
This code:
$ConfigOut = @"
Configuration Name {
param(
[String]`$Parameter1
# One can evaluate expression
# E.g.: `$AllNodes.Where("Role -eq Web").NodeName
Node ('Node1','Node2','Node3') {
$(
Get-DscResource | ForEach {
"`n`t`t# Call the '$($_.Name)' Resource the Provider`n"
"`t`t$($_.Name) FriendlyName {`n`n"
"`t`t`t# Possible Resource Options`n"
$Ofs = "','"
$_.Properties | ForEach {
"`t`t`t$($_.Name) = '$($_.Values)' # Type:$($_.PropertyType) $(If($_.IsMandatory) {'is Mandatory!'})`n"
$Ofs = ' '
"`t`t}`n"
} # end Node
} # end Configuration
$ConfigOut
Produces this output on my Windows 8.1:
Configuration Name {
param(
[String]$Parameter1
# One can evaluate expression
# E.g.: $AllNodes.Where("Role -eq Web").NodeName
Node ('Node1','Node2','Node3') {
# Call the 'File' Resource the Provider
File FriendlyName {
# Possible Resource Options
DestinationPath = '' # Type:[string] is Mandatory!
Attributes = 'Archive','Hidden','ReadOnly','System' # Type:[string[]]
Checksum = 'CreatedDate','ModifiedDate','SHA-1','SHA-256','SHA-512' # Type:[string]
Contents = '' # Type:[string]
Credential = '' # Type:[PSCredential]
DependsOn = '' # Type:[string[]]
Ensure = 'Absent','Present' # Type:[string]
Force = '' # Type:[bool]
MatchSource = '' # Type:[bool]
Recurse = '' # Type:[bool]
SourcePath = '' # Type:[string]
Type = 'Directory','File' # Type:[string]
# Call the 'Archive' Resource the Provider
Archive FriendlyName {
# Possible Resource Options
Destination = '' # Type:[string] is Mandatory!
Path = '' # Type:[string] is Mandatory!
Checksum = 'CreatedDate','ModifiedDate','SHA-1','SHA-256','SHA-512' # Type:[string]
DependsOn = '' # Type:[string[]]
Ensure = 'Absent','Present' # Type:[string]
Force = '' # Type:[bool]
Validate = '' # Type:[bool]
# Call the 'Environment' Resource the Provider
Environment FriendlyName {
# Possible Resource Options
Name = '' # Type:[string] is Mandatory!
DependsOn = '' # Type:[string[]]
Ensure = 'Absent','Present' # Type:[string]
Path = '' # Type:[bool]
Value = '' # Type:[string]
# Call the 'Group' Resource the Provider
Group FriendlyName {
# Possible Resource Options
GroupName = '' # Type:[string] is Mandatory!
Credential = '' # Type:[PSCredential]
DependsOn = '' # Type:[string[]]
Description = '' # Type:[string]
Ensure = 'Absent','Present' # Type:[string]
Members = '' # Type:[string[]]
MembersToExclude = '' # Type:[string[]]
MembersToInclude = '' # Type:[string[]]
# Call the 'Log' Resource the Provider
Log FriendlyName {
# Possible Resource Options
Message = '' # Type:[string] is Mandatory!
DependsOn = '' # Type:[string[]]
# Call the 'Package' Resource the Provider
Package FriendlyName {
# Possible Resource Options
Name = '' # Type:[string] is Mandatory!
Path = '' # Type:[string] is Mandatory!
ProductId = '' # Type:[string] is Mandatory!
Arguments = '' # Type:[string]
Credential = '' # Type:[PSCredential]
DependsOn = '' # Type:[string[]]
Ensure = 'Absent','Present' # Type:[string]
LogPath = '' # Type:[string]
ReturnCode = '' # Type:[UInt32[]]
# Call the 'Registry' Resource the Provider
Registry FriendlyName {
# Possible Resource Options
Key = '' # Type:[string] is Mandatory!
ValueName = '' # Type:[string] is Mandatory!
DependsOn = '' # Type:[string[]]
Ensure = 'Absent','Present' # Type:[string]
Force = '' # Type:[bool]
Hex = '' # Type:[bool]
ValueData = '' # Type:[string[]]
ValueType = 'Binary','Dword','ExpandString','MultiString','Qword','String' # Type:[string]
# Call the 'Script' Resource the Provider
Script FriendlyName {
# Possible Resource Options
GetScript = '' # Type:[string] is Mandatory!
SetScript = '' # Type:[string] is Mandatory!
TestScript = '' # Type:[string] is Mandatory!
Credential = '' # Type:[PSCredential]
DependsOn = '' # Type:[string[]]
# Call the 'Service' Resource the Provider
Service FriendlyName {
# Possible Resource Options
Name = '' # Type:[string] is Mandatory!
BuiltInAccount = 'LocalService','LocalSystem','NetworkService' # Type:[string]
Credential = '' # Type:[PSCredential]
DependsOn = '' # Type:[string[]]
StartupType = 'Automatic','Disabled','Manual' # Type:[string]
State = 'Running','Stopped' # Type:[string]
# Call the 'User' Resource the Provider
User FriendlyName {
# Possible Resource Options
UserName = '' # Type:[string] is Mandatory!
DependsOn = '' # Type:[string[]]
Description = '' # Type:[string]
Disabled = '' # Type:[bool]
Ensure = 'Absent','Present' # Type:[string]
FullName = '' # Type:[string]
Password = '' # Type:[PSCredential]
PasswordChangeNotAllowed = '' # Type:[bool]
PasswordChangeRequired = '' # Type:[bool]
PasswordNeverExpires = '' # Type:[bool]
# Call the 'WindowsFeature' Resource the Provider
WindowsFeature FriendlyName {
# Possible Resource Options
Name = '' # Type:[string] is Mandatory!
Credential = '' # Type:[PSCredential]
DependsOn = '' # Type:[string[]]
Ensure = 'Absent','Present' # Type:[string]
IncludeAllSubFeature = '' # Type:[bool]
LogPath = '' # Type:[string]
Source = '' # Type:[string]
# Call the 'WindowsProcess' Resource the Provider
WindowsProcess FriendlyName {
# Possible Resource Options
Arguments = '' # Type:[string] is Mandatory!
Path = '' # Type:[string] is Mandatory!
Credential = '' # Type:[PSCredential]
DependsOn = '' # Type:[string[]]
Ensure = 'Absent','Present' # Type:[string]
StandardErrorPath = '' # Type:[string]
StandardInputPath = '' # Type:[string]
StandardOutputPath = '' # Type:[string]
WorkingDirectory = '' # Type:[string]
} # end Node
} # end Configuration
Watch:
Steven Murawskis and Joel Bennett: Video on Desired State Configuration (DSC)
http://www.youtube.com/watch?v=EN8eJA9rpXw
hope this helps....
PowerShell Artikel, Buchtipps und kostenlose PowerShell Tutorials + E-Books
auf der deutschsprachigen PowerShell Community
Mein 21 Teiliger PowerShell Video Grundlehrgang
Deutsche PowerShell Videos auf Youtube
Folge mir auf:
Twitter |
Facebook |
Google+

Configuration assistant "Repository Configuration" Failed

Installing OEM Grid Control 11gR1 I get:
Running Configuration assistant "Repository Configuration"
Calling the EMSCHEMA MANAGER: CREATE
Please check the Repository Configuration Assistant logs at: /opt/oracle/Middleware/oms11g/sysman/log/schemamanager
Configuration assistant "Repository Configuration" Failed
Below is the only error I could identify in the logs:
more emschema.log.TRANSX
2010-09-21 20:59:45,977 [main] INFO emschema.tzinrtwcdst3 - created action logger....
2010-09-21 20:59:45,982 [tzinrtwcdst3] INFO emschema.tzinrtwcdst3 - logger is set properly..
2010-09-21 20:59:50,985 [tzinrtwcdst3] INFO emschema.tzinrtwcdst3 - repos connection is null, creating a new one
2010-09-21 20:59:55,436 [tzinrtwcdst3] INFO emschema.tzinrtwcdst3 - repos connection is created and saving it...
2010-09-21 20:59:55,436 [tzinrtwcdst3] INFO emschema.tzinrtwcdst3 - repos connection found: true on try: 0
2010-09-21 21:00:01,438 [tzinrtwcdst3] INFO emschema.tzinrtwcdst3 - repos connection found
2010-09-21 21:00:01,438 [tzinrtwcdst3] INFO emschema.tzinrtwcdst3 - repos connection is not null, using old one
2010-09-21 21:00:01,438 [tzinrtwcdst3] INFO emschema.tzinrtwcdst3 - check if repos user exists
2010-09-21 21:00:01,438 [tzinrtwcdst3] INFO emschema.tzinrtwcdst3 - check if repos user exists..
2010-09-21 21:00:01,438 [tzinrtwcdst3] INFO emschema.tzinrtwcdst3 - REPOS_CONN is found for checking for repos user... u
sing it
2010-09-21 21:00:01,438 [tzinrtwcdst3] INFO emschema.tzinrtwcdst3 - query DB for repos user existence check
2010-09-21 21:00:02,012 [tzinrtwcdst3] INFO emschema.tzinrtwcdst3 - repos user exists: true on try: 0
2010-09-21 21:00:08,015 [tzinrtwcdst3] INFO emschema.tzinrtwcdst3 - repos user exists: true on try: 1
2010-09-21 21:00:14,017 [tzinrtwcdst3] INFO emschema.tzinrtwcdst3 - found repos user
2010-09-21 21:00:14,064 [tzinrtwcdst3] INFO emschema.tzinrtwcdst3 - repos connection is not null, using old one
2010-09-21 21:00:14,064 [tzinrtwcdst3] INFO emschema.tzinrtwcdst3 - executing: SELECT count(*) FROM all_objects WHERE ob
ject_name='MGMT_MESSAGES' AND owner='SYSMAN'
2010-09-21 21:00:14,444 [tzinrtwcdst3] INFO emschema.tzinrtwcdst3 - mgmt_messages found: true on try: 0
2010-09-21 21:00:20,446 [tzinrtwcdst3] INFO emschema.tzinrtwcdst3 - mgmt_messages found: true on try: 1
2010-09-21 21:00:26,448 [tzinrtwcdst3] INFO emschema.tzinrtwcdst3 - found mgmt_messages
2010-09-21 21:00:26,448 [tzinrtwcdst3] INFO emschema.tzinrtwcdst3 - Running the Schema Action
2010-09-21 21:00:26,449 [tzinrtwcdst3] INFO emschema.tzinrtwcdst3 - Running the Schema Action
2010-09-21 21:00:26,708 [tzinrtwcdst3] INFO emschema.tzinrtwcdst3 - */opt/oracle/Middleware/oms11g/sysman/admin/emdrep/bin/classpath.properties does not exist*
2010-09-21 21:08:57,758 [tzinrtwcdst3] DEBUG emschema.tzinrtwcdst3 - transx completed
2010-09-21 21:08:57,758 [tzinrtwcdst3] INFO emschema.tzinrtwcdst3 - Schema Action Completed Successfully
2010-09-21 21:08:57,758 [tzinrtwcdst3] INFO emschema.tzinrtwcdst3 - Schema Action Completed Successfully
Does anybody have any idea of what is going on?

I have tagged this question as answered, and opened it on the Entreprise Manager / Grid control forumHi user12987613, Congratulate on you have the question answered. Can you share the solution with me. I see the exact error. Where can I find the file?

Repository Configuration Failed:

while installing EMGC 11g, "Repository Configuration" Failed
log files:
INFO: oracle.sysman.top.oms: action logger path calculated finally: /export/home/oracle/Oracle/Middleware_1032v/oms11g/sysman/log/schemamanager/m_101410_0756_PM/m_101410_0756_PM.TRANSX/
INFO: oracle.sysman.top.oms:The transx command execution is completed with the status 0
INFO: oracle.sysman.top.oms:process_id:1dh4pzuderxtx
INFO: oracle.sysman.top.oms:Failure...
INFO: oracle.sysman.top.oms:1 error(s) happened in performing the action:
INFO: oracle.sysman.top.oms:1):
ORA-00955: name is already used by an existing object
File:/export/home/oracle/Oracle/Middleware_1032v/oms11g/sysman/admin/emdrep/sql/core/latest/availability/availability_synonyms.sql
Statement:CREATE PUBLIC SYNONYM MGMT_AVAILABILITY FOR MGMT_AVAILABILITY
INFO: oracle.sysman.top.oms:The plug-in Repository Configuration has failed its perform method
Thanks.

It seems repository was not clean prior to installing gc, drop the repository as below and install again
SELECT COUNT(*) FROM ALL_USERS WHERE USERNAME IN ('SYSMAN','SYSMAN_MDS');
If the result of this query is 1, then the database has these schemas, so drop them.
Before dropping the schema, set the environment variable LD_LIBRARY_PATH to the ORACLE_HOME/lib directory of the OMS. Also set the ORACLE_HOME to the Oracle home of the OMS.
Drop the schema by running the following command from the Oracle home of the OMS.
$<ORACLE_HOME>/sysman/admin/emdrep/bin/RepManager <repository_database_host> <repository_database_port> <repository_database_sid> -action dropall -dbUser <repository_database_user> -dbPassword <repository_database_password> -dbRole <repository_database_user_role> -mwHome <middleware_home> -mwOraHome <oms_oracle_home> -oracleHome <oms_oracle_home>
After dropping the schema, manually delete the database files mgmt.dbf and mgmt_ecm_depot1.dbf.

Repository Configuration Metadata issue for OBIEE11g

Hi,
I am having an issue while using RCU to created BI schema.
On database connection details wizard, after giving all details, on checking prerequisites, on Initializing repository configuration metadata, it gives an error:
The version 11.2.0.1.0 of the database that you are using is not a supported version or
The specified user may not have sufficient privileges to perform this operation. User should have sysdba or dba privileges.
But I successfully reached at Map Tablespaces step on previous attempt.
Only thing I change before re-running the RCU is, delete unwanted tablespaces.
On db connection details I am using user SYS and role SYSDBA.
Please, can anyone suggest to solve this.

Some where you might have to rename the PREFIX from DEV to DEV1 or some thing else.

Metadata Manager Repository Configuration Error

I'm trying to install XI 3.1 Metadata Manager FP1, and run into the following error:
"Metadata Management Repository Configuration
Metadata Management Repository configuration failed with the following error.
The plugin CrystalEnterprise.MM.Repository does not exist in the CMS (FWM 0217)
IDL:img.seagatesoftware.com/OCA/oca_abuse:3.2
InfoObject CrystalEnterprise.MM.Repository was not found.
Unable to initialize Metadata Management Core.
Utility failed with code 3.
You need to re-run the installer again."
I ran it again and got the same error. I have a SQL Server database set up, ODBC connections test successfully. Anyone know how to resolve this issue?

I ran into the same error, and a colleague was able to figure it out. I thought I'd share that in case someone else runs into this.
We have two CMS servers. When I was installing MM's CMS components on the first server, it failed late in the install because it couldn't find an object that was installed earlier. It must have been accessing the second server, even though I entered "localhost" as the CMS location. By disabling and stopping the second server in the CMC, I was able to complete the install.
Regards,
Sean

Repository configuration error

Hello,
Does anyone know what might be causing the following exception? We're getting this thrown as soon as we try to establish a connection with the following line of code:
repositoryManager = RepositoryManagerFactory.connect();
I greatly appreciate any insight.
The source of this error is com.bea.content.RepositoryRuntimeException: Repository configuration error. at com.bea.content.manager.internal.RepositoryManagerImpl.getRepositoryOps()Lcom.bea.content.manager.RepositoryOps;(RepositoryManagerImpl.java:159) at com.bea.content.manager.internal.RepositoryManagerImpl.connect()[Lcom.bea.content.manager.RepositorySession;(RepositoryManagerImpl.java:107) at com.bea.content.manager.RepositoryManagerFactory.connect()Lcom.bea.content.manager.RepositoryManager;(RepositoryManagerFactory.java:36) at com.radian.portal.portalContent.PortalContent.Initialize()V(PortalContent.java:461) at com.radian.portal.portalContent.PortalContent.()V(PortalContent.java:55) at com.radian.portal.portalContent.GetSnippetTag.doStartTag()I(GetSnippetTag.java:25) at jsp_servlet._portlets._divisions.__showsnippet._jspService(Ljavax.servlet.http.HttpServletRequest;Ljavax.servlet.http.HttpServletResponse;)V(showSnippet.jsp:10) at weblogic.servlet.jsp.JspBase.service(Ljavax.servlet.ServletRequest;Ljavax.servlet.ServletResponse;)V(JspBase.java:33) at weblogic.servlet.internal.ServletStubImpl$ServletInvocationAction.run()Ljava.lang.Object;(ServletStubImpl.java:971) at weblogic.servlet.internal.ServletStubImpl.invokeServlet(Ljavax.servlet.ServletRequest;Ljavax.servlet.ServletResponse;Lweblogic.servlet.internal.FilterChainImpl;)V(ServletStubImpl.java:402) at weblogic.servlet.internal.TailFilter.doFilter(Ljavax.servlet.ServletRequest;Ljavax.servlet.ServletResponse;Ljavax.servlet.FilterChain;)V(TailFilter.java:28) at weblogic.servlet.internal.FilterChainImpl.doFilter(Ljavax.servlet.ServletRequest;Ljavax.servlet.ServletResponse;)V(FilterChainImpl.java:27) at com.documentum.eip.integration.bea.BeaRequestParameterFilter.doFilter(Ljavax.servlet.ServletRequest;Ljavax.servlet.ServletResponse;Ljavax.servlet.FilterChain;)V(BeaRequestParameterFilter.java:37) at weblogic.servlet.internal.FilterChainImpl.doFilter(Ljavax.servlet.ServletRequest;Ljavax.servlet.ServletResponse;)V(FilterChainImpl.java:27) at com.bea.p13n.servlets.PortalServletFilter.doFilter(Ljavax.servlet.ServletRequest;Ljavax.servlet.ServletResponse;Ljavax.servlet.FilterChain;)V(PortalServletFilter.java:313) at weblogic.servlet.internal.FilterChainImpl.doFilter(Ljavax.servlet.ServletRequest;Ljavax.servlet.ServletResponse;)V(FilterChainImpl.java:27) at com.bea.wlw.netui.pageflow.PageFlowJspFilter.doFilter(Ljavax.servlet.ServletRequest;Ljavax.servlet.ServletResponse;Ljavax.servlet.FilterChain;)V(PageFlowJspFilter.java:101) at weblogic.servlet.internal.FilterChainImpl.doFilter(Ljavax.servlet.ServletRequest;Ljavax.servlet.ServletResponse;)V(FilterChainImpl.java:27) at weblogic.servlet.internal.RequestDispatcherImpl.include(Ljavax.servlet.ServletRequest;Ljavax.servlet.ServletResponse;Z)V(RequestDispatcherImpl.java:613) at weblogic.servlet.internal.RequestDispatcherImpl.include(Ljavax.servlet.ServletRequest;Ljavax.servlet.ServletResponse;)V(RequestDispatcherImpl.java:400) at weblogic.servlet.jsp.PageContextImpl.include(Ljava.lang.String;)V(PageContextImpl.java:154) at jsp_servlet._portlets._divisions.__snippetexample._jspService(Ljavax.servlet.http.HttpServletRequest;Ljavax.servlet.http.HttpServletResponse;)V(snippetExample.jsp:19) at weblogic.servlet.jsp.JspBase.service(Ljavax.servlet.ServletRequest;Ljavax.servlet.ServletResponse;)V(JspBase.java:33) at weblogic.servlet.internal.ServletStubImpl$ServletInvocationAction.run()Ljava.lang.Object;(ServletStubImpl.java:971) at weblogic.servlet.internal.ServletStubImpl.invokeServlet(Ljavax.servlet.ServletRequest;Ljavax.servlet.ServletResponse;Lweblogic.servlet.internal.FilterChainImpl;)V(ServletStubImpl.java:402) at weblogic.servlet.internal.TailFilter.doFilter(Ljavax.servlet.ServletRequest;Ljavax.servlet.ServletResponse;Ljavax.servlet.FilterChain;)V(TailFilter.java:28) at weblogic.servlet.internal.FilterChainImpl.doFilter(Ljavax.servlet.ServletRequest;Ljavax.servlet.ServletResponse;)V(FilterChainImpl.java:27) at com.documentum.eip.integration.bea.BeaRequestParameterFilter.doFilter(Ljavax.servlet.ServletRequest;Ljavax.servlet.ServletResponse;Ljavax.servlet.FilterChain;)V(BeaRequestParameterFilter.java:37) at weblogic.servlet.internal.FilterChainImpl.doFilter(Ljavax.servlet.ServletRequest;Ljavax.servlet.ServletResponse;)V(FilterChainImpl.java:27) at com.bea.p13n.servlets.PortalServletFilter.doFilter(Ljavax.servlet.ServletRequest;Ljavax.servlet.ServletResponse;Ljavax.servlet.FilterChain;)V(PortalServletFilter.java:313) at weblogic.servlet.internal.FilterChainImpl.doFilter(Ljavax.servlet.ServletRequest;Ljavax.servlet.ServletResponse;)V(FilterChainImpl.java:27) at com.bea.wlw.netui.pageflow.PageFlowJspFilter.doFilter(Ljavax.servlet.ServletRequest;Ljavax.servlet.ServletResponse;Ljavax.servlet.FilterChain;)V(PageFlowJspFilter.java:101) Caused by: javax.naming.LinkException: [Root exception is javax.naming.NameNotFoundException: remaining name: /app/ejb/content.jar#RepositoryOpsEJB/local-home]; Link Remaining Name: 'java:app/ejb/content.jar#RepositoryOpsEJB/local-home' at weblogic.jndi.internal.WLNamingManager.getObjectInstance(Ljava.lang.Object;Ljavax.naming.Name;Ljavax.naming.Context;Ljava.util.Hashtable;)Ljava.lang.Object;(WLNamingManager.java:98) at weblogic.jndi.internal.ServerNamingNode.resolveObject(Ljava.lang.String;Ljava.lang.Object;ILjava.util.Hashtable;)Ljava.lang.Object;(ServerNamingNode.java:265) at weblogic.jndi.internal.BasicNamingNode.resolveObject(Ljava.lang.String;Ljava.lang.Object;Ljava.util.Hashtable;)Ljava.lang.Object;(BasicNamingNode.java:732) at weblogic.jndi.internal.BasicNamingNode.lookup(Ljava.lang.String;Ljava.util.Hashtable;)Ljava.lang.Object;(BasicNamingNode.java:191) at weblogic.jndi.internal.BasicNamingNode.lookup(Ljava.lang.String;Ljava.util.Hashtable;)Ljava.lang.Object;(BasicNamingNode.java:196) at weblogic.jndi.internal.BasicNamingNode.lookup(Ljava.lang.String;Ljava.util.Hashtable;)Ljava.lang.Object;(BasicNamingNode.java:196) at weblogic.jndi.internal.WLEventContextImpl.lookup(Ljavax.naming.Name;Ljava.lang.String;)Ljava.lang.Object;(WLEventContextImpl.java:237) at weblogic.jndi.internal.WLContextImpl.lookup(Ljava.lang.String;)Ljava.lang.Object;(WLContextImpl.java:336) at javax.naming.InitialContext.lookup(Ljava.lang.String;)Ljava.lang.Object;(InitialContext.java:347) at com.bea.p13n.util.JndiHelper.lookupNarrow(Ljava.lang.String;Ljava.lang.Class;)Ljava.lang.Object;(JndiHelper.java:83) at com.bea.content.manager.internal.RepositoryManagerImpl.getRepositoryOps()Lcom.bea.content.manager.RepositoryOps;(RepositoryManagerImpl.java:152) at com.bea.content.manager.internal.RepositoryManagerImpl.connect()[Lcom.bea.content.manager.RepositorySession;(RepositoryManagerImpl.java:107) at com.bea.content.manager.RepositoryManagerFactory.connect()Lcom.bea.content.manager.RepositoryManager;(RepositoryManagerFactory.java:36) at com.radian.portal.portalContent.PortalContent.Initialize()V(PortalContent.java:461) at com.radian.portal.portalContent.PortalContent.()V(PortalContent.java:55) at com.radian.portal.portalContent.GetSnippetTag.doStartTag()I(GetSnippetTag.java:25) at jsp_servlet._portlets._divisions.__showsnippet._jspService(Ljavax.servlet.http.HttpServletRequest;Ljavax.servlet.http.HttpServletResponse;)V(showSnippet.jsp:10) at weblogic.servlet.jsp.JspBase.service(Ljavax.servlet.ServletRequest;Ljavax.servlet.ServletResponse;)V(JspBase.java:33) at weblogic.servlet.internal.ServletStubImpl$ServletInvocationAction.run()Ljava.lang.Object;(ServletStubImpl.java:971) at weblogic.servlet.internal.ServletStubImpl.invokeServlet(Ljavax.servlet.ServletRequest;Ljavax.servlet.ServletResponse;Lweblogic.servlet.internal.FilterChainImpl;)V(ServletStubImpl.java:402) at weblogic.servlet.internal.TailFilter.doFilter(Ljavax.servlet.ServletRequest;Ljavax.servlet.ServletResponse;Ljavax.servlet.FilterChain;)V(TailFilter.java:28) at weblogic.servlet.internal.FilterChainImpl.doFilter(Ljavax.servlet.ServletRequest;Ljavax.servlet.ServletResponse;)V(FilterChainImpl.java:27) at com.documentum.eip.integration.bea.BeaRequestParameterFilter.doFilter(Ljavax.servlet.Servlet Request;Ljavax.servlet.ServletResponse;Ljavax.servlet.FilterChain;)V(BeaRequestParameterFilter.java:37) at weblogic.servlet.internal.FilterChainImpl.doFilter(Ljavax.servlet.ServletRequest;Ljavax.servlet.ServletResponse;)V(FilterChainImpl.java:27) at com.bea.p13n.servlets.PortalServletFilter.doFilter(Ljavax.servlet.ServletRequest;Ljavax.servlet.ServletResponse;Ljavax.servlet.FilterChain;)V(PortalServletFilter.java:313) at weblogic.servlet.internal.FilterChainImpl.doFilter(Ljavax.servlet.ServletRequest;Ljavax.servlet.ServletResponse;)V(FilterChainImpl.java:27) at com.bea.wlw.netui.pageflow.PageFlowJspFilter.doFilter(Ljavax.servlet.ServletRequest;Ljavax.servlet.ServletResponse;Ljavax.servlet.FilterChain;)V(PageFlowJspFilter.java:101) at weblogic.servlet.internal.FilterChainImpl.doFilter(Ljavax.servlet.ServletRequest;Ljavax.servlet.ServletResponse;)V(FilterChainImpl.java:27) at weblogic.servlet.internal.RequestDispatcherImpl.include(Ljavax.servlet.ServletRequest;Ljavax.servlet.ServletResponse;Z)V(RequestDispatcherImpl.java:613) at weblogic.servlet.internal.RequestDispatcherImpl.include(Ljavax.servlet.ServletRequest;Ljavax.servlet.ServletResponse;)V(RequestDispatcherImpl.java:400) at weblogic.servlet.jsp.PageContextImpl.include(Ljava.lang.String;)V(PageContextImpl.java:154) at jsp_servlet._portlets._divisions.__snippetexample._jspService(Ljavax.servlet.http.HttpServletRequest;Ljavax.servlet.http.HttpServletResponse;)V(snippetExample.jsp:19)

If it is urgent ... http://metalink.oracle.com

OEM11G - Repository configuration failed

I'm installing Oracle Enterprise Manager Grid Control 11gR1 in silent mode.
The installation failed with the message :
Assistant de configuration "Repository Configuration" Echec.
In the log /data/app/oracle/middleware/oms11g/sysman/log/schemamanager/m_270212_1433/m_270212_1433.CREATE/em_repos_config.log I've a message specifying that the temporary tablespace is empty:
java.sql.SQLException: ORA-25153: tablespace temporaire vide
ORA-06512: a ligne 37
How can I solved this error and is it possible not the restart all the grid installation but to correct the problem and manually configure the grid?
I urgently need help.

Hi,
Find out the name of the datafile/(s) associated with this tablespace
select file_name,(bytes/1024/1024) FileSizeMB from dba_temp_files where tablespace_name='&tablespace_name';
+ The installation can not be continued from here, need to drop the complete failed installation and then proceed with the new installation.
Best Regards,
Venkat

Documentation and configuration settings

Hi Experts,
Can any one provide documentation and configuration settings for the following areas.
Planning and budget,
PC Industrial,
Standard Cost Calculation,
Production Variance Analysis
Regards
Balu

HI Madhu
I have sent you the Io & Pctr documents to ur mail id. Plz assign points if its helpful.
Regards
Rajaram

Bea content repository configuration

Hi All,
Can somebody can tell me that what will be impact of setting
streamble property set to true in BEA repository configuration.
and one more doubt that how can we use multiple BEA systme repository ?
PLs. reply ASAP
Thanks.
Edited by btsl_deepti at 03/16/2007 3:37 AM

These javadocs on the RepositoryConfig class explain what streaming binary content means and the implications for its use:
http://e-docs.bea.com/wlp/docs92/javadoc/com/bea/content/manager/RepositoryConfig.html
For multiple repositories, see the "Configuring Additional BEA Repositories" section on this page:
http://e-docs.bea.com/wlp/docs92/cm/filesystemArchCM.html

Documentation repository configuration

Similar Messages

Maybe you are looking for