Documentation Template for WD project

Hi Experts,
Do someone has template for documenting a Dynpro project. We have to document our WD application. Please provide some templates with example you use for documenting your project.
Regards,
Vishal.

Dear Venkatesh,
Please visit the following links:
http://service.sap.com/erp
http://solutionbrowser.erp.sap.fmpmedia.com/ (Functional prespective)
http://service.sap.com/instguides --> mySAP Business Suite Applications --> mySAP ERP --> mySAP ERP 2005 --> Upgrade
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/LOVC/LOVC.pdf
For Functionality Differences pls refer to the below site -
http://solutionbrowser.erp.sap.fmpmedia.com/
After opening the site, please select the Source Release Version which is 4.6 b Then Select the Target Release Version which is "mySAP ERP 2005" or ECC 6.0
Select the Solution Area like Financials, Human Capital Management, Sales....
Select module like MM, PP, SD, QM.....
Click on Search
Then it displays the Release Version and the Delta Functionality. which can be downloaded to a word document if required.
and also check the release notes of ECC 6.0 in service.sap.com.
Hope this helps you.
Do award points if you found them useful.
Regards,
Rakesh

Similar Messages

Can a RoboHelp project be used as a template for other projects?

I noticed there is the ability to "duplicate a layout". Does
that mean I can use my RoboHelp project with all its settings as a
template for other projects. I corrupted an existing project by
deleting a generated HTML file. I forced an update on one of the
chapters in a linked FM book and now for whatever reason in the
generated output, the entire book is being re-created within the
folder for the chapter in which I deleted the HTML output and
forced an output.
Surely I don't have to redefine all the settings again in the
FrameMaker Document Settings dialog, and in the WebHelp layout. All
enlightenment is much appreciated. Come on baby give it to me one
more time! Sorry couldn't resist. It is Friday after all.
Peter

Hi there Writerman_in_TO
You seem to have a multiple segmented question.
I noticed there is the ability to "duplicate a layout". Does
that mean I can use my RoboHelp project with all its settings as a
template for other projects.
In one way, yes you can. You are able to use Windows Explorer
to copy the project folder to a new location. Once you do that, you
can open RoboHelp and open the project. Then click File > Rename
Project and off you go.
Not sure what to tell you about the Frame > RoboHelp
mashup. Not familiar with Frame yet. Hopefully someone more savvy
there will pop in and help.
Cheers... Rick

Documentation Template for Infoset

Hi,
I need a template for Documentation of Infoset.
Thanks in Advance.

AM I MISSING ANYTHING
PROJECT.SCOPE:
     Project.Overview .…………………………………………………………….
          Project.Details ……………………………………………………………
INFRASTRUCTURE.OVERVIEW:
OLD Infrastructure. Details ………….………………………….………………..
New Infrastructure. Details…………………………………….………………..
APPLICATION.OVERVIEW:
     Application.Overview ……….………….…………….….……..……………….
DIMENSIONS.OVERVIEW:
     Dimensions ………………………….……………………………..…………….
          Dimension.Summary …………………….………………………..……………………
          Dimension.Table ………………………………………………….………..…………….
     Alias.Table ………………………………………………………………………………..…………..
          Alias.Table.Summary …………………………………………………………………..
SOURCE.DATA:
     Source.Data.Summary ……………………………………………………………
APPLICATION.BUILD:
     Application.Build.Summary ………………………………………..……………
DATALOADS:
     DataLoad.Process ……………………………………………..…………………
CALCULATIONS:
     Calculation.Summary …………………………………………….………………
AUTOMATED PROCESSES:
     Automated.Processes ……………………………………..…….……………..
OTHER PROCESSES:
     Other.Processes ………………………………………………..……………..
Please advise

How to use myself JSP template for my projects

I am using JDev 10. .I realized the default templates of JSP in JDev don't match with my projects so I want to create my own template for JSP Pages. I read some threads in Forum about this problem but I am a beginner, I cannot understand fully and don't know the way to create template nor adding it into Project. Someone can tell me where I can find the tutorials, examples(demo).
Thank you very much.

Hi,
The Bex report uses the Standard Template 0ANALYSIS_PATTERN while it is executed.
So if your sure that the look and feel of all the Reports is going to remain same, you don't need to even attach all these Queries to Templates in WAD.
When you execute the BEx query, it would pick up the standard template and run it in portal.
But if you want to customize the Report Template:
1) You can change this standard template 0ANALYSIS_PATTERN and customize it according to ur requrement in WAD.
2) Or you can create a copy of this standard template and change it as required. Then change the template in spro (transaction RSCUSTV27) to point to this Z template.
Let me know if you need more details.
Regards,
Forum

Any Documentation Templates for AC Suite applications?

Hi is anyone come across ASAP templates for AC suites or some one created any template on design document for a/m? If so please pass on the details.

hi ashok,
i am providing links. i cant provide u entire matter.pls chk it out.
http://www.susanto.id.au/papers/BPEASAP.asp
www.sap.info/.../index.php4/PrintEdition-78313c678e21c9d1c-int/-1/deliver/Resourcefile-165033c68f4d8e1ff3
http://search.zdnet.com/index.php?t=0&s=0&o=2&q=sap
thanks
karthik
reward me if usefull

What's the best Visual Studio 2010 (VB) template for my project?

Hi,
I'm about to embark on a project which will end with a website that gathers users info (name, email, description, youtube address etc), then will display that info to other users via filtering.
My initial instinct is to create an empty website, then create a standard membership site with a database
(See here) then to add a few tables that will allow me to gather the extra data.
Should I:
Use the ASP.NET Empty Website template as per the link
Use the ASP.NET Website template which has all the pages already set up (not sure if the database has already been set up with this)
Use the ASP.NET Dynamic Data Entities Website template
Or something else completely?
(ps, When I click on online templates I get 'No Items Found'
Thanks
Michael

Hi Michael,
Thank you for posting in MSDN forum.
Since this forum is to discuss: Visual Studio WPF/SL Designer, Visual Studio Guidance Automation Toolkit, Developer Documentation
and Help System, and Visual Studio Editor.
So I’m afraid that it is not the correct forum for this issue.
Based on your issue, since I am not the ASP.NET developer experts, so I suggest you can consult the issue to ASP.NET forum:http://forums.asp.net/ , maybe you will get better support.
In addition, I know that each web project template has the feature of itself from the following MSDN document, maybe you will get some useful message about your issue.
https://msdn.microsoft.com/en-us/library/ee377605(v=vs.110).aspx
Thanks for your understanding.
Best Regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Template for Collaboration Project listing

Does anybody know what is the template I need to overwrite from:
.../idc/idcplg?IdcService=COLLECTION_DISPLAY&IsClbraList=1&SortField=dClbraDescription&SortOrder=Asc&ResultCount=nolimit&cmAllProjects=1
It gives you all the Collaboration Projects, I did a ScriptDebugTrace=1 but there's so many calls that I can't tell which is the exact template of this page. I need to modify some items on this page so I'd like to be able to redirect this COLLECTION_DISPLAY service call to my own template.
Can anybody tell me how can I achieve this? or any other suggestions as to what else can I do are welcome.
Thanks

Dear Venkatesh,
Please visit the following links:
http://service.sap.com/erp
http://solutionbrowser.erp.sap.fmpmedia.com/ (Functional prespective)
http://service.sap.com/instguides --> mySAP Business Suite Applications --> mySAP ERP --> mySAP ERP 2005 --> Upgrade
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/LOVC/LOVC.pdf
For Functionality Differences pls refer to the below site -
http://solutionbrowser.erp.sap.fmpmedia.com/
After opening the site, please select the Source Release Version which is 4.6 b Then Select the Target Release Version which is "mySAP ERP 2005" or ECC 6.0
Select the Solution Area like Financials, Human Capital Management, Sales....
Select module like MM, PP, SD, QM.....
Click on Search
Then it displays the Release Version and the Delta Functionality. which can be downloaded to a word document if required.
and also check the release notes of ECC 6.0 in service.sap.com.
Hope this helps you.
Do award points if you found them useful.
Regards,
Rakesh

How to setup security for new project type templates?

Hi Folks,
I created some new project type templates.
But, as per management decision, i need to restrict this new project templates for all project users except only one super user.
So, could anybody please help me out that how to make security in the above scenario?
Thanks in advance,
SPR

Soooo...I need to install OID on top of my Forms, Reports, and Discoverer install? Would it be better to install the SSO and OID before installing any other middle ware products like Forms, Reports, and Discoverer? Then extend the domain to include Forms, Reports, and Discoverer?
Can you point me to documentation that would help me get this issue worked out?
Thanks.

Templates for Requirements Gathering

Hi,
I need templates for Requirement gathering.
Pls kindly help me out by providing me asap.
I joined the SAP BI team very recently and am putting my best effort to stay on.
I can have some idea if u can provide me the following:
1. Interview Script
2. PI-Tree Documentation
3. PI Documentation Template
4. Project Measure Glossary
5. Data Access Documentation Template
Thanks in advance and will assign the max pts possible for useful content.
Pls send them to my swetha.jshankar at gmail

And please kindly forward to Brian.Yang at Cognizant.com
Thanks in advance.

Oracle VM Template for Primavera PPM

Hi,
Will edelivery be releasing any Oracle VM templates for Primavera Project Portfolio Management in the foreseeable future (within the next 2 months)? We are exploring VM deployment options with Primavera.
Thanks.
Regards,
Martin

Hi,
i downloaded the templates, got the vm guests running. But when I login to Siebel guest and start_siebel I get... core dump and errors that gateway (and the rest) cannot be started. I am quite puzzled with this, any ideas strongly appreciated.
Cheers,
A.

Excel busy when I try to modify a template of MS Project visual report

(Sometime) when I try to modify a xlst template for MS Project (2013) visual report MS Project say me that excel is busy.
But Excel is closed. I try to close and re-open bot excel and MSProject but say me always that cannot open visual report (based on my custom template) because excel is busy.
In my template I inserted also an external connection to other data (coming from another database).
The template is populate with "visualize report" ....
Also If I try to modify the template (using MS PRoject function) MS Project say me that MS Excel is busy...
I used that template sussefully... but when I make some update to template file (for example add a table o a simple text) then MS Project is not able to open excel file.... but I don't understand why. So I have to rollback modifies and take previous template
version.
[Note:] could be something related to which sheet (of template xlst file) has focus on when saved?
thank you.
regards
db
Daniele.b75

could depend by what I choose when close & save the template?
Excel ask me...
Sometimes I try to click on SI .... or NO ... but always MS Project says me that Excel is busy.
please.... help
thank you
Daniele.b75

WDA Documentation Template

Hello All,
I am into a SAP ECC 6.0 & EP 7.0 implementation for the Metallurgy industry vertical client based in UK. We have developed some real complex scenarios as WDA services which will be integrated with the portal.
Now we are following the standard documentation templates recommended by SAP for all developments. But my problem is I am unable to find a proper <b>documentation template for WDA developments</b>.
If somebody could find me a templates for the same, it would be of valuable help. Points will be rewarded.
Thanks in advance,
Supriya

Hi,
see Technical specification template for WebDynpro development required
Regards, Heidi

Functional specification and technical Specification Templates for MDM

Hi All,
I am looking for some Functional Specification and Technical Specification Templates for MDM project. If anyone have such kind of documents then please send it to me.
Please if any one have any other useful documents for MDM implementation for example, transport strategy then please also send those to my ID [email protected]
Points will be rewarded to the helpful answers.
Thanks,
Shiv.

Hi Shiv
I'd like you to refer these URLs
Re: MDM Implementation Methodology
<a href="http://hosteddocs.ittoolbox.com/RD021507b.pdf">PDF Document</a>
Regards,
Krutarth

Where can I get project template for Web Dynpro example&

Hello,
There is an example in SAP NetWeaver Developer Studio Documentation for creating a Web Dynpro Application accessing ABAP functions. It references the initial Web Dynpro project template file: TutWD_FlightList_Init.zip. How can I get it?
It is not available in the SAP Developer Network (Web Application Server area | Samples and Tutorials).
Thanks

The URL I gave you also contains a link to the _Init project.
"Project Template: The initial project (starting point for this tutorial) is also available to [download from SDN]." (https://www.sdn.sap.com/sdn/downloaditem.sdn?res=/irj/servlet/prt/portal/prtroot/com.sapportals.km.docs/business_packages/a1-8-4/4tutwd_flightlist_init.zip)

Manual creation of Project Site for a project is taking old project site template.

Dear All,
I have modified the project site and save it as a template to associate it with an EPT so that the modification will reflect in new project sites.
For existing projects, I am deleting the old project sites (after taking backup) and recreating so that new modifications will be there for existing projects and I am able to do so.
But, for 1 of the project, when I have deleted the project site and recreated, still it is taking the old template (i.e. new modifications has not been seen).
Kindly advice in some areas so that I can jump in and around and can find out a solution so that the project site will take modified project template.
Example to get the issue in an easy way:
ProjectA:
Project Site: http://epm/pwa/ProjectA
Issue List:
Column: Category [data type as Choice: Cat1, Cat2, Cat3]
Have saved 1 project site as a template and associated with an EPT with the following changes:
Column: Category [data type as Choice: Choice1, Choice2, Choice3]
Then, deleted the project site: http://epm/pwa/ProjectA and recreated.
So, it should take the modifications in the project site.
But, it is showing as Column: Category [data type as Choice: Cat1, Cat2, Cat3].
Regards,
Shravan

Dear Guillaume,
Thanks for your response.
Please seem my comments inline:
Which Project Server version do you use?
PS 2010
It is working well and as expected for all projects except for 1 specific project?
Yes. It is working well for other projects except 1 project.
Has this project something particular?
Nope. It is similar as other projects.
How do you proceed to create the new project site? Do you go to the site actions, then new site and pick up your new template?
First I have modified 1 of the project site and saved that site as a template.
Then, I have deleted the existing project site (from Project Sites under Operational Policies) and recreated so that project site will gets created from the new template. But, it's not happening.
Regards,
Shravan

Documentation Template for WD project

Similar Messages

Maybe you are looking for