Documents.Add with using preset - [CS2 VBScript]

Hi
I want to create a document, using a preset document style. The line I'm using is:
Set myDocument = myInDesign.documents.Add(myInDesign.DocumentPresets.Item("A3"))
I've set up a matching document style and named it A3.
I get the following error message:
Error number:30477
Error String:Invalid value for parameter 'ShowingWindow' of event 'Add'. Expected Boolean,
but received DocumentPreset.
Any idea what my problem is?
TIA

Found the answer...
Just put true as the first parameter.

Similar Messages

How to get the active document file name using illustrator CS2 plugin code?

I wanna take file name from active document using illustrator plugin CS2. Plz anybody help me..
Thanks in advance..

AIDocumentSuite::GetDocumentFileSpecification() should get you that information. Note that it will only work properly if you've already saved the document (or opened it from a file). I'm not sure what the result looks like if you're calling that on a new, unsaved file.

Ps CS6 Action problem: New document created with "Preset: Clipboard" is misnamed

Ps CS6 v13.0.1
OS X 10.6.8
In an Action, File > New with "Preset: Clipboard" ignores the specified document name and uses one of the following names when the clipboard definitely does hold valid content:
1. The name that was applied by the previous invocation of File > New in a session.
2. No name if Action is run before File > New has been used in current session.
Only when the clipboard has no valid content will the newly created document be given the specified name.

The Color Profile seems to work differently between CS5 and CS6. In CS5 when I use menu File>New and there is something in the clipboard I see Preset clipboard as the dedault setting and see my current Photoshop color setting profile set in as the color profile. I pasted a ProPhoto selection into the clipboard. When I do the same in CS6 and use File>New I see Preset Clipboard as the default setting but the color profile is not my Photoshop Color setting its ProPhotoRGB the same as I pasted into the clipboard. However if I close CS6 down. Then start CS6 and do menu File>New I see Preset Clipboard as the default setting and the corol profile is my Photoshop color setting profile sRGB not ProPhotoRGB that in the clibpoard. So I feel the copy to clipboard from Photoshop triggers something internally to change the profile in CS6 it not something that gets set in the clipboard for the ProPhotoRGB override does not happen if I shut Photoshop down and restart it.
I think I like the CS6 change. Noel I wrote that for you I want you to know I don't think CS6 is all bad. This change should help one from getting profiles mismatches. CS6 is still the buggest Phoshop around. It does not stop working as smuch as it did befor the 13.0.1 update. And when it does there a chance Autosave may save the day. The last Photoshop stop working message I got from windows was when I tried to run a script. There were no open document so nothing to recover. After terminating CS6 and restarting it the script work without a problem.

Working in Logic 9, how do I use a drum loop WITH ITS PRESET EFFECTS? I can drag and drop the loop but it plays dry in timeline. thanks

Working in Logic 9, how do I use a drum loop WITH ITS PRESET EFFECTS? I can drag and drop the loop but it plays dry in timeline. thanks

Here's the short-cut solution:
Green Apple tracks are MIDI files (so to speak). If you drag one from the loop browser (Capitol C Orchestral hit, as you mentioned in this exable) directly into the arrange page it creates the MIDI file and the instrument to play it back on.
HOWEVER.If you create and audio track first, THEN drag the green Apple loop onto that track, the loop will get "bounced" with the reverb in tact and you'll have the exact sound that you heard in the preview.
Make sense?

How to add shortcuts to user Start Menu and Taskbar or Desktop with using Microsoft Office 2013 Config file.

Hello,
How can i add the shortcuts for Office 2013 feature (Word, excel, ext) to the users taskbar or desktop with using config.xml file while installing the Microsoft Office 2013 from SCCM?
I know how to do that with OCT, but i have another problem if i use OCT. So i have to do it with Config.file, but i don't know which code can i write on config.xml file to create shortcut on desktop or taskbar...
Regards,

Hi
There is a known issue about
changing the shortcut location for an Office 2013 application:
When you try to change the shortcut locations for Office 2013 applications in the Office Customization Tool (OCT), you receive the following error message:
Invalid start in folder. Please try again.
Then, you add the Start in location for Office 2013 and run a customized installation. When you double-click the shortcuts that are displayed on the desktop, Configure shortcuts does
not work and you receive the following error message:
Sorry, we couldn’t find your file. Is it possible it was moved, renamed or deleted?
To work around this issue, type a single open bracket ([) in the Start in
field.
In addition, refer to the link below on "Configure shortcuts" in OCT:
http://technet.microsoft.com/en-us/library/cc179097.aspx#Configure_shortcuts
Regards
Tylor Wang
TechNet Community Support

HT3529 Is there a way to create, store and use preset messages for use with "Messages"?

Is there a way to create, store and use preset messages for use with "Messages". I often have a recurrinig message to send, after a repeating event, and need to enter the same short message each time. It would be nice to have this short message stored and selectable so that I do not need to enter each time.

found an answer that seems to work:
https://discussions.apple.com/message/17997300#17997300

Displaying Document Name With The Summary in a Single Column Using Document Library View.

Hi All,
I have a question that relates to SharePoint Document Library Views. I want to view the Documents name with the summary in a single column. Below image shows an example of it. I need this within a SharePoint Document Library. Also I want the height of the
row to be increased more than the default height. I cannot figure it out how to do that? Could you someone help me to do this. I have inserted the Document Library as an App Part to the page.
So could you someone help me to solve this matter?
Thanks and regards,
Chiranthaka

HI Chiranthaka,
You can create DataView webpart using SPD and then modify the display template according to your need.
http://deannaschneider.wordpress.com/2012/07/10/item-counts-dvwp-sp2010/
Hope this will help to solve your problem.
Best Regards,
Brij K

I purchased Adobe Creative Suite C2 and have been using it for years on the same computer no problem with using it. Recently upon opening Photoshop I received a pop up window saying due to Adobe Software security we need you to activate your CS2 software.

I purchased Adobe Creative Suite C2 and have been using it for years on the same computer without any problems with using it. Recently upon opening Photoshop I received a pop up window saying due to Adobe Software security we need you to activate your CS2 software. I tried, phone activation, web activation, nothing is working. I have the serial number and my Adobe account information. Any suggestions?

Error: Activation Server Unavailable | CS2, Acrobat 7, Audition 3
Mylenium

Exporting as jpeg with use artboards adds to file name

When I export from Illustrator CS5 with "Use Artboards" checked it adds a "-01" to the end of my file name before the extention. I'm assuming that its because its artboard #1 or something. It happens with the all or the range button checked. It doesnt show the -01 when you are saving the file name. This is pretty annoying because I have to go back and re name the files when this happens. Any advice? Thanks!

Same problem, Gex.
Been trying to get this resolved for months with no joy. I have recently produced over 250 brand logos for a large multi national, all of which have to supplied in various formats and file types including .jpg. I too use only one artboard and since I don't want the logos cropped tight to the image, I check "use artboard" with the result that I get logoname-01.jpg on every file.
It may not seem to be too much of a sweat to then delete the offending -01 from the resulting file name, but when you have to do this repeatedly it is extremely tiresome... and so unnecessary!! I too do not want, or need, to append the file name with anything at all.
I really am at a loss to know why, if i have one artboard (AND ONLY ONE) it has to have a number at all. With 2 or more artboards, sure, it may be useful to identify each, but with 1... that is it, that is all there is. The only one. One of one. No more, no less. Very little chance of confusion i would have thought!
So, Adobe can we have a radio button (or preference) along the lines of: "add pasteboard number" or "remove pasteboard number" or perhaps a more enlightened soul at Adobe can respond with a workaround (unlikely, it is Adobe after all!).

I am unable to open documents ending with .doc (rather than docx, which I can open). The error message states "[name of document]" is being used by "another user." Do you want to make a copy? Help!!!

How can I open a Word document, when I receive this error message "[name of document]" is being used by "another user." Do you want to make a copy?
(This only occurs on the documents I have saved as .doc; the ones saved as "docx" open for me. Help!

Did you recently reinstall the OS then copy all your files back over? Do a Get info on one of the documents and see if your current UserName is listed and has Read & Write permissions. If not select the Documents folder and check that for Read & Write permissions for your UserName. If it doesn't have R & W permissions Add it so it does.

Corrupt document gets created in document library with document template using createlistitem workflowaction in visual studio workflow for office 365 solution

Hi,
My requirement is to create a document library associated to a custom content type with a document template associated. Also I need to create a document based on the template in this document library when a new item is created in another list by taking the
reference ID of that new Item , I need to create the document with the name appended by ID. I need to do all this deployment using WSP.
I have created document library with document template associated to content type by following instructions in below stated blog :http://blogs.msdn.com/b/chaks/archive/2011/05/19/deploying-a-document-template-file-in-content-type-in-a-office365-sandboxed-solution.aspx
This works perfect for me.
However, there are few observations, when going to Document Library > Library Settings > Advanced Settings > Document Template section - doesnt shows the Edit template link. When tried to look at the value for the document template using view source
, it is giving me /Lists/MyDocsListInstance/Forms/template.dotx instead of the actual template file uploaded.
Ignoring the above observation, when I am trying to create a sandbox based workflow in visual studio to create document in document library when new item is created in another list, I provide the ContentTypeID as the ID associated with the document library
with template.
It creates the corrupt document at end of workflow.
I have tried using .docx instead of .dotx files for workflow as per solution provided in some of the post but it isnt resolving my issue.
Any help is much appreciated.
Regards,
Krutika

OK, I am going to throw out a lot of ideas here so hopefully they get you closer to a diagnosis. Hang on :)
Does it happen to work for some users but not others? If so, try logging in on the "good" computer with the "bad" username. This will tell you if the problem is related to the end-user's system. Also, once the user downloads a document
successfully can they open and work on it in Word? Also, does the document library have any custom content types associated with it or does it just use 'Document'?
I notice that there are other folks on the web that have run into this same problem and the similarity seems to be that they are either on SharePoint 2007 or have upgraded from 2007. Did this doc library start out as a 2007 library?
What you might want to do is this: Make a site collection from scratch in 2013 (or find one that you know was created in 2013). Choose team site (or whatever you want) for the root web and set up the security the same way you have it on the malfunctioning
library. Now, use windows explorer to copy and paste some of the documents to the new location. Be sure you recreate any needed content types. Now test it from the troubled user's computer.
I'm thinking there may be something that is different about the library since it was migrated through various versions and updates since 2007. I've sometimes found that there can be problems (especially with user profiles but that's a different story) with
things that go through this evolution.

Using a Document Camera with Meeting

Anyone using a Document Camera with Application sharing with
a breeze meeting. I know the camera part won't work well. But some
companies have software and USB connection to the CPU. Thought then
you could use Application Sharing to show the users.

Hi John
you can browse the images and video with the image capture application. connect and turn on the camera before launching the application. you can then choose which to import. one other thing, does your camera show up as a removable drive? if it does, open it up as you would a folder.

With using any version of iTunes, whenever I import songs into my library using the "add to library" function, iTunes adds those songs in songs' alphabetical order. This is pretty annoying since it does not preserve the logical track number or album.

With using any version of iTunes, whenever I import songs into my library using the "add to library" function, iTunes adds those songs in songs' alphabetical order. This is pretty annoying since it does not preserve the logical track number or even the album sort order (for example when adding 2 albums stored in a unique folder). Anyone has any ideas ? Been stumped for a while....!!!

hi i had the same problem today when i updated my itunes to latest version. however, i have just found my songs in the 'itunes media' folder. this was accessed through 'my music' then keep clicking through until you find itunes media and all my library songs were in there and i then just added these files to my library and all were restored however, i have lost all my playlists but at least my 700 songs are back. very dissapointed with apple that they have let this happen with their latest update, the previous version was miles better than this one . hope you find them. stevo

Assign task with use a document variable

Hi,
if i'm assigning a pdf document in assign task operation with use a document variable instead of application asset, I see the same old blank form after user submits the form.
what ever typed in the form is not seen in the output variable assigned in Assign user task.
If I use application asset and provide input xml, then I could see the filled form as output when user submits.
What should I do to get the filled data in the form?
Note: Reason for using document variable is I want to dynamically assign the form created in the process to assign task instead of getting from repository.
Highly appreciate your assistance.
Thanks,
kc

Ok. So are you populating document with the values entered by user in process before assigning.
Best approach is to xml and application asset.
And do you have your pdf document binded with xml schema. If not then you wont have fields populated in any way.
Thanks,
Prashast

Using Document Library with Baseline

Hi there,
I have a specific need with Sharepoint. I have a document library and I want to be able to mark with a tag or generate a baseline for my folders.
I've already searched on the web, and there is someone doing it just coping and pasting every single file. Is that the better way to get this?
Thanks,
Tiago

Hi Tiago,
What did you mean "Using Document Library with Baseline" and "generate a baseline for my folders"?
Did you mean that navigate the document library folders in treeview?
Did you mean that search or filter multiple folders documents with the same tag (managed metadata column)?
You may be able to use the "Navigation Hierarchies and Key Filters" for that specified SharePoint 2010 library, here is an article about metadata navigation settings you can check below,
http://www.sharepointboost.com/blog/understand-and-configure-metadata-avigation-and-filtering/
Thanks
Daniel Yang
TechNet Community Support

Documents.Add with using preset - [CS2 VBScript]

Similar Messages

Maybe you are looking for