Documents and spreadsheets not displaying correctly on the task bar

When I open a series of documents or excel spreadsheets, quite often they will appear as blanks on the task bar and I have to right click - restore to be able to see a preview or select them for editing. If I do normal left click on the document nothing
happens and they stay blank.
If I could get a picture of my desktop loaded it would show the cursor on MS word on the taskbar then above the taskbar a preview of the 4 sessions - 2 have documents you can see and 2 are blank. THe first 2 I had to right click restore to be able to see.
THe other 2 will be blank until I right click then restore

Hi Tmac4x4，
Please share us a screenshot as arnavsharma mentioned.
Please open the event viewer and check if there are any related error log. For more information about the event log, please refer to the following KB.
http://support2.microsoft.com/kb/308427
Best regards,
Fangzhou CHEN
Fangzhou CHEN
TechNet Community Support

Similar Messages

  • Link URL containing feed: is not displayed correctly in the status bar

    When a link contains feed: in the URL, it is not displayed correctly in the status bar.
    The actual URL is
    a href="feed:http://www.....com/feed/"
    but the URL shown in the status bar is
    feed://http//www.....com/feed/
    IE8 shows the correct URL in the status bar. Not sure if this is a problem, but thought I would report it.

    Such a feed works for me even if it is displayed differently then you expect on the status bar.
    <pre><nowiki>data:text/html,<a href="feed:https://support.mozilla.com/en-US/questions/758020/feed">feed</a></nowiki></pre>

  • Gmail usernames and passwords not displaying correctly - is the issue with Firefox?

    I have 3 email accts and when I click username in Gmail those 3 would show and passwords would be remembered automatically. Now it shows these 3 and 2 others that have been used before, plus NO passwords displayed. In the past if this happened I refreshed page and it went back to the 3 accts - this is no longer happening. Could it be a firefox issue?
    Also my autofill in Gmail is no longer working and I have seen other inquiries about that. Is there any info on how to fix these???

    This is a known issue in Firefox 4 beta 12. You could wait til' the RC comes out, or you could grab one of the latest nightly builds availible here that fix this problem: ftp://ftp.mozilla.org/pub/firefox/nightly/latest-mozilla-central/
    Just a note though, nightly versions of firefox are generally less stable than betas or releases. I am waiting for the Release Candidate to come out myself. (Should be early next week)

  • Small caps not displaying correctly in the ePub file

    Hello All,
    I am using cs5.5 to generate ePub file, and I found that small caps contents not displaying correctly in the generated ePub file even the CSS looks correct. Please check and confirm, if anyone faced this issue? Also other formatting components are looks fine in the ePub file.
    Thanks,
    Praveen

    @Jongware/Bob, thanks for your responses, I checked the ePub output using 'Adobe Digital Editions', and getting the same issue in 'Calibre', but in 'Sigil', it looks fine.
    In CSS it has been declared like below:
    span.SmallCaps { 
    font-variant : small-caps;
    Here 'SmallCaps' is the character style applied for the 'small caps' contents.
    Thanks,
    Praveen

  • Hierarchy variable inpu help not displayed correctly in the portal

    Hi ,
    I have a problem when trying to select Hierarchy in the variable selection screen hierarchy  is not being displayed
    correctly in the portal/browser  . When running the same report in BEX Analyser  and in RSRT with HTML option the
    hierarchy displays correctly in the variable selection screen .
    In Portal Var selection screen Hierarchy is displayed side by side ie horizontally not level by level.
    Please help.

    Thanks Venkat, Problem is solved with the note u mentined

  • PDF's in Mail and Preview not displaying correctly

    Ever since upgrading to Yosemite PDF's are not displaying correctly. Every time i generate a PDF of a sales quote it seems to lose a lot of information.
    But the strange thing is.....
    Preview and Mail both show PDF with missing text.
    When I open using "Quick Look Attachment" within Mail or Adobe Acrobat it looks perfect.
    When emailed, recipients (mostly Windows users) seem to have no problem opening it and seeing all text.
    So far seen that issue is only in Preview and Mail
    Only has happened since upgrading to Yosemite
    PDF is created using web based ZOHO CRM to build quotes.
    See image below to see the difference in what Mail and Preview sees compared with how other apps open the same PDF.
    NOTE: sensitive info has been purposely blurred on image.

    Do a backup, using either Time Machine or a cloning program, to ensure files/data can be recovered. Two backups are better than one. 
    Try setting up another admin user account to see if the same problem continues. If Back-to-My Mac is selected in System Preferences, the Guest account will not work. The intent is to see if it is specific to one account or a system wide problem. This account can be deleted later.
    Isolating an issue by using another user account
    Try booting into the Safe Mode using your normal account.  Disconnect all peripherals except those needed for the test. Shut down the computer and then power it back up after waiting 10 seconds. Immediately after hearing the startup chime, hold down the shift key and continue to hold it until the gray Apple icon and a progress bar appear and again when you log in. The boot up is significantly slower than normal. This will reset some caches, forces a directory check, and disables all startup and login items, among other things. When you reboot normally, the initial reboot may be slower than normal. If the system operates normally, there may be 3rd party applications which are causing a problem. Try deleting/disabling the third party applications after a restart by using the application un-installer. For each disable/delete, you will need to restart if you don’t do them all at once.
    Safe Mode - Yosemite
    Safe Mode - About

  • Emails and RSS not displaying correctly

    I have had this issue for a while, it's not a big issue but is very annoying.
    When I receive an email or open an RSS feed story that has a banner or some kind of graphic embedded into it, it won't display the images.
    For example, I got an email from Ticketmaster today about upcoming concerts, it read like this:
    ticketAlert, brought to you by Ticketmaster
    --> Just Announced
    Three Days Grace
    Pengrowth Saddledome, Calgary AB
    Mon, 11/30/09 On Sale: Sat, 10/03/09
    http://ntr.ticketmaster.ca:80/ssp3/?Z=Qz0zMTg3NzZfMiZSPXRhX2phXzYwMiZVPTEyMTA5MT UxNyZNPTImQj0yLjAmUz1odHRwOi8vd3d3LnRpY2tldG1hc3Rlci5jYS9ldmVudC8xMTAwNDMzQjM4RE I2NkM4
    Tegan and Sara
    Southern Alberta Jubilee Auditorium, Calgary AB
    Fri, 01/08/10 On Sale: Fri, 10/02/09
    http://ntr.ticketmaster.ca:80/ssp3/?Z=Qz0zMTg3NzZfMiZSPXRhX2phXzYwMiZVPTEyMTA5MT UxNyZNPTImQj0yLjAmUz1odHRwOi8vd3d3LnRpY2tldG1hc3Rlci5jYS9ldmVudC8xMTAwNDMzOEMzME FCNUQy
    Emmylou Harris & Her Red Dirt Boys with Special Guest Buddy Miller
    Jack Singer Concert Hall (ECPA), Calgary AB
    Wed, 11/11/09 On Sale: Fri, 10/02/09
    http://ntr.ticketmaster.ca:80/ssp3/?Z=Qz0zMTg3NzZfMiZSPXRhX2phXzYwMiZVPTEyMTA5MT UxNyZNPTImQj0yLjAmUz1odHRwOi8vd3d3LnRpY2tldG1hc3Rlci5jYS9ldmVudC8xMTAwNDMzOUQ3OD VENEQ5
    etc.
    Is there something wrong with my settings in Mail? or is it something to do with the way these messages are sent out.

    I just wanted to send an update to let everyone know I was able to get my issue fixed (after about an hour with the chat support) and one nof the steps was obvious while the other was not. Sticky Footer was enabled so when the browser window was enlarged vertically, it introduced the white space. Removing the checkmark from that box fixed that issue. Regarding the header giving white space, the tech support person took control of my computer because they weren't have the same issue when I sent them my file which was very odd. They did some fiddling about with the header and grouping of elements in the header and were finally able to get the white bar to disappear when viewed in Preview and on a web browser. They couldn't give me a specific reason why it did that or why what they did fixed it. So, sadly not a lot to go on for how to fix the problem other than 'fiddle around with it till it works,' which is frustrating at best.
    Thanks again for your willingness to help me out. I hope your issue gets fixed Barbara. If you haven't  already, you should chat support on your issue.
    Start here: http://helpx.adobe.com/contact.html?product=muse&topic=using-my-product-or-service and then click the button that says I STILL NEED HELP and the chat will be there. Good luck!
    Jeremy

  • Firefox opens, and preview shows when hover on the task bar link, but the window will not maximize, or show up at any size on my screen (Windows 7) Help?!

    I am running Windows 7 and just updated Firefox to the 7.0 version. I can open Firefox, in the sense that I can run the application. I can see that it is open because the link shows up on my task bar, and when I hover over it I can see the thumbnail preview - which, incidentally says "You're almost there!"; but I can not open the window! I have tried clicking once on the task bar link, and once again (just in case I was clicking to minimize instead of maximize). I have tried double clicking the shortcuts on my desktop, then the one in my program files, as well as the one in my start menu, and the static one pinned to my task bar. I have tried accessing Firefox from every path available on my computer and I can open it every time, but *never* not even once have I been able to view it on my screen. I can't understand what would cause this and maybe I'm just an idiot but can anybody help me... please? Oh, and I don't know if it makes any difference, but I did try restoring 6.0 and I re installed 7.0 again, all to the same end... Many thanks to anyone willing to help me fix this!

    -> [[Software Update Failed#w_run-as-administrator|Run as Administrator]]
    -> right-click Firefox icon and choose Properties
    * go to Compatibility tab
    * click Use Resolution 640x480 pixels
    * click OK and start Firefox
    -> Firefox will now start but you should be able to change the size of the window.
    * Close Firefox and now Uncheck the 640x480 resolution
    * Start Firefox again and now all should be fine
    Check and tell if its working.

  • Why does the 'Downloads' gives me a full page which I can not just minimize to the task bar.

    I'm running Firefox 34.05 as opposed to what the data will say (34.0)
    Lately, when I press the 'Downloads' in Tools, I get a full page as if it is a new tab. I use to have a small block that I could minimize to the task bar. Is there something I can do to restore it to it former glorious self?
    As a secondary question which seemed to happen at the same time comes this question. now when I download a clip it does not appear in the Download (now) page. It still downloads but I can not view it download, stop the download or even go to where it was downloaded. Any help would be appreciated.

    Normally Tools > Downloads or Ctrl+j launches the Library dialog and displays the Downloads section (the Library dialog also shows History and Bookmarks). Regarding the size of the window, it could be that you used the dialog to view history or bookmarks and enlarged it. Firefox doesn't remember the size separately for the 3 different lists.
    On the second point, since you have a few different downloaders, I'm not sure which one is malfunctioning, or maybe there's a conflict between them. You might check their pages on the Add-ons site to see if reviews or support information reports the same issue and mentions any workarounds.
    * https://addons.mozilla.org/firefox/addon/video-downloadhelper/
    * https://addons.mozilla.org/firefox/addon/download-flash-and-video/
    * https://addons.mozilla.org/firefox/addon/video-downloader-profession/

  • How can you change the display size on the task bar

    how do you change the display size on the task bar

    If, however, you want to change the size of the display of the menubar, meaning make the icons and text larger, there is no way to do that directly other than to change the resolution of the screen.
    You can change the as-viewed size of that temporarily by using either -
    • Mouse zoom - if you have a Magic Mouse (Apple wireless mouse), hold down the Control key and use the scroll up and scroll down finger gestures on the mouse.
    • Zoom - go to System Preferences > Universal Access > Seeing and turn on Zoom. You can also use the noted keyboard shortcut to enable/disable this Zoom feature.

  • Alert rules not displaying correctly in the RWB after transporting to QA

    Hi Experts,
    After transporting the alert rules from DEV to QA, the rules are not correctly displayed in the RWB in QA e.g. a star (*) is displayed in all the fields instead of the filter values which I have entered such as the "Sender Party"; "Sender Interface" etc. I am also not able to manually change the values in the RWB in QA anymore because the values are greyed out.
    Strangely enough, the rules are correctly displayed inside the SXMSALERTRULES table in QA.
    Do you perhaps know how to solve this issue so that the rules are also correclty displayed in the RWB after transporting?
    Thanks and regards
    Brendon

    Having the same problem and looking for fix...

  • Mail with image and PDF not displaying correctly on Outlook

    Environment and problem
    OS X Mountain Lion, Mail 6.1 (everything up to date)
    Emails with mixed image and PDF attachments send from my MacBoox Pro are not being displayed correctly when received on Outlook. It is not an Outlook problem.
    Multiple inline images - ok
    I compose an email, rich text format, insert severnal inline images, send to colleage on Windows 7 using Outlook, all received ok. He sees the message with inline images.
    Multiple inline images and PDF - not ok
    I compose a similar email with multiple inline images, but attach a PDF. This time all of the attachments (images and PDF) appear at the end of the message when viewed in Outlook.
    Gmail browser comparison
    I repeat the above from a Gmail account via Safari and I can make an email with inline images and PDF attachments and it works.
    Any thoughts, tips, bug reports, etc appreciated.
    Jon

    No - can't be an Apple fan and then critisise MS for being proprietry
    My problem was solved by installing Attachment Tamer.
    It could also have been solved by emailing from Gmail directly.
    The guys I work with use Outlook and were suprised to see this behaviour.
    It's only basic OS X email that has a problem.
    I wholeheartedly agree that the standard for emails are not conducive for rich layout control.
    But - when my email just has images I had no problems. Take for example the email notifications we're getting from this thread - there are images and layout etc and work fine.
    The key feature from Attachment Tamer hints at the problem (and its solution):
    send images embedded in HTML layout and safely mix embedded images with other attachments;

  • New programs not working and websites not displaying correctly

    I need a little assistance. My older G5 is running Mac OS X (10.3.x), Mac OS X 10.3.9 (7W98) - I don't have the funds to upgrade right now - and during an update to iTunes awhile back the power was accidently cut and then my mess began. ITunes would no longer open,
    I am good with PCs and can pretty much resolve anything on them, but have been absolutely stumped with this. I searched all kinds of troubleshooting and eventually decided to just erase and reinstall Panther hoping that would resolve the issue, iTunes works now, but Safari is not displaying web pages correctly (for instance Facebook is just a stack of words but other sites may look okay), and now any new program I download will not open after I install it like Firefox.
    Any ideas as to how I can resolve this mess?

    You can try do download Onyx, it is a good free Software that will repair many issues that you can have with your Mac. You are running the very last 10.3.x I suppose.

  • Main Sub not displayed correctly on the FPL9

    Hello Experts,
    We have requirement to credit the GL account only after payment is received against the specific receivable e.g. $ 20 charge posted on the account and $ 18 payment clears the charge partially then crediting the GL account for $ 18. In order to achieve this we are using statistical posting logic. First defined main sub (e.g. Statistical 00XX 00AA) with statistical key 'G' and mapped these statistical sub to real subs using posting area 1010 (e.g. Real 00XX 00BB). Also defined liability GL account for these real subs (00XX 00BB) in EK02 and in FQZB (against MAIN transaction "00XX" and not against SUBs). Now, the problem is - payment clears the $ 20 charge correctly, it credits the liability GL correctly, and it also updates tables such as DFKKOP with required new entry of (REAL SUB i.e. 00XX 00BB) line but it doesn't show that line correctly on the FPL9 screen. It shows cleared $ 18 line item with statistical MAIN SUB (00XX 00AA).
    Am I missing something here? Could you please help me to resolve this issue. Please also let me know if you think there is better way to address this requirement.
    Regards,
    A-jay.

    Hi Dany,
    It sound like tyou are trying to localize your application to Japanese. You might want to take a loot at this link here 
    Joe Daily
    National Instruments
    Applications Engineer
    may the G be with you ....

  • VMware Player and mouse not behaving correctly with the vmmouse driver

    I'm running Arch on VMware Player and having problems with the mouse behavior.
    - Arch is updated, 32 -bit
    - VMware Player 6.0.1
    - Host is Windows 8.1 64-bit
    - XFCE 4.10
    If I install xf86-input-vmmouse, the following happens:
    - If cursor touches the edge of the screen when scrolling a window with the scroll bar, scrolling stops. If I continue pressing the mouse button and moving the mouse (and not touching any edges), the scrolling starts working again after two seconds.
    - When opening any new window, hovering and clicking will register only after two seconds. This is very noticeable when opening the application menu and trying to launch any app - first click never works.
    Uninstalling the vmmouse driver fixes the above problems. The mouse "feeling" gets very bad though, it seems jumpy and the acceleration is crazy and can't be tweaked to be satisfactory with the mouse settings. With vmmouse the mouse feels otherwise just fine.
    Installing or uninstalling Open-VM-Tools doesn't do anything.
    I tried this, but it had no effect: https://wiki.archlinux.org/index.php/In … s_expected
    Happens both in fullscreen and windowed, scrolling behavior happens every time, hover/click lag is not so predictable (seems to happen 50 % of the time).
    Might there be any easy fix for this?

    Hi Sung, Thanks for your reply.
    Leonardo:
    If I understand your msg correctly, I'm wondering if
    the data model as you described is complete.
    You state that you have MaintenanceType, Maintenance,
    and MaintenanceOrder, but don't you need
    MaintenanceOrderLine?MaintenanceOrderLine is what I'm calling Maintenance. A Maintenace record is used just to link a MaintenanceOrder to a MaintenanceType
    >
    Otherwise, you say that you removed all Maintenance's
    in step 2). How did you form a list of all
    Maintenance's in step 4)? How do you form this
    list?
    was raised due to unique constraint violationAt step 3) I'm using a view object, MaintenanceTypeView, to create a list of checkboxes, one for each MaintenanceType.
    At step 4), for each MaintenanceType selected in the form, I'm creating a new Maintenance using:
    //All codes of maintenance types, that already have a
    //respective maintenance record in the db, have already
    //been remove from the maintenancesToInsert list at this
    //point
    for (Iterator iter = maintenancesToInsert.iterator(); iter.hasNext();) {
    MaintenanceViewRow maintenanceRow = (MaintenanceViewRow) maintenanceView.createRow();
    maintenanceRow.setMaintenanceTypeCode(Integer.valueOf((String)iter.next()));
    maintenanceView.insertRow(maintenanceRow);
    >
    Sung

Maybe you are looking for