Documents Modified and sent to approval disapears

Hi,
I´m making some tests with a document that I create and aprove, but when I modify the document and send it again for approval it can not be seen by users, is this a normal Behavior on KMC? o something is wrong? Should´t users see the document always and while is in aproval have access to the current version that is aproved already?
Thanx in Advanced!
Kind Regards,
Gerardo

Hi Gerardo,
   Don't forget that you are using approval process, it is not a workflow. In this process, once you have submited a document to approval, the approver only can approve or reject. This approver can not modify this document only he/she can give feedback. If the approver modify it, this process is broken.
   During the process, the end users who have only read permission don't see this document until it be published. Only is seen if the user has read-write permission.
http://help.sap.com/saphelp_nw2004s/helpdata/en/04/9053ad76fd0948b4ec2abf97898a3e/frameset.htm
Patricio.

Similar Messages

  • Draft created on iPhone, modified and sent from iPad - Epic Fail

    My wife worked for days on a reply to an email she received.  She did this on her iPhone and was saving it as a Draft.  We both have mobile me accounts and both of these accounts are set up on our iPad.  I opened the draft from her Draft folder in the iPad, read it over, made a couple of changes and hit Send.  A message was displayed about not being able to send it, something wasn't set up properly.  It never got put back in the Draft folder, or the Sent Folder.  It didn't sync with her Outbox on her Mac either.
    She can create an email on the iPad and send it just fine.  So can I.  My account is the primary account in the iPad.
    We just can't edit/send a Draft on the iPad that was created on either Apple Mail, or iPhone Mail.
    Anyone else ever experience this?
    Where did the email go?
    Thanks

    Just discovered this issue as well and "epic fail" is the exact way to put it. Can't believe this is an issue. Doesn't matter if in me.com, gmail, or other accounts...there is no way to edit and save IMAP draft message on iphone or ipad. Major disappointment.

  • Batches Consumed When Document sent for approval

    When Inventory transfer Document sent for approval after selection of batches,the batch gets consumed to other document during the time of approval document approved and added.This throws error message as negative inventory in batch when approval document is approved and added.what is the solution to restrict the batch selected in document sent for approval.

    Hi Naresh......
    You can put restriction to avoid this by SP Transnotification......
    Regards,
    Rahul

  • PDF is changing all my pdf documents into a word document - My boss sent me a pdf email through outlook and when I try to open it changes to a word document

    PDF is changing all my pdf documents into a word document - My boss sent me a pdf email through outlook and when I try to open it changes to a word document Help this is so frustrating

    Hi tinam74565130,
    That does sound frustrating! It sounds as though the filename associations have become confused on your computer. You should be able to reset that easily. Here are some instructions:
    Change which programs Windows uses by default - Windows Help
    How to change the default application for a file type | Macworld
    Please let us know how it goes.
    Best,
    Sara

  • Hi help unlock the phone happened after we installed a new programa we can not get the activation password and ID, I know and still does not stop the phone bought in Israel and what documents should be sent to confirm that my phone Please read through the

    hi help unlock the phone happened after we installed a new programa we can not get the activation password and ID, I know and still does not stop the phone bought in Israel and what documents should be sent to confirm that my phone Please read through the help

    What I am saying is ..........
    The iPhone HAS to be active making calls on the UK carrier network for the carrier to identify as "theirs" and therefore eligible for the Carrier to unlock
    The way to achieve this is to use a PAYG sim making and receiving calls to establish a customer relationship  with the Carrier and then follow the Carrier's process to unlock
    With a PAYG it usually means adding a specified (by the carrier ) amount  usually £15 /£20 depending on the carrier
    This is how O2 function and according to Gemma  this is how Vodafone work

  • Since installing Yosemite all my documents say created, modified, and last opened at 7 08

    Since installing Yosemite (10.10.3 on a 2009 iMac) the dates of creation, modification, etc. of documents are shown correctly, but every one was Created, Modified, and Last opened at 7 08. Is my clock going bad? The time on the desktop menu gives the correct time.

    Date/ Time Incorrect in Applications

  • Document Types Setup for Expense Approval and Payable Invoice

    Hi,
    Can anyone please suggest Document Types Setup for 'Expense Approval' and 'Invoice Approval' and its tables related to the same. Table storing its document_type_code and wf_approval_itemtype as we have for PO_DOCUMENT_TYPES_ALL table for Purchase Order.
    Thank You.
    Regards,
    Meghana

    Hi
    It could be because of main memory problem... so Restrict your selections and do the statistical setup
    by the way how many comp codes you have? restrict with comp codes or doc ranges
    Thanks,

  • Fax document retrieved through ARCHIVOBJECT_GET_TABLE,added to mail and sent as attachment

    Hi Team,
       The fax document with multiple pages is retreived through FM 'ARCHIVOBJECT_GET_TABLE' and inserted to the mail and sent as an attachemnt .
       But the attachment has only one page .
       if anyone has solved this type of issue.  Please provide the inputs.
    Thanks,
    USR

    Hi Team,
       The fax document with multiple pages is retreived through FM 'ARCHIVOBJECT_GET_TABLE' and inserted to the mail and sent as an attachemnt .
       But the attachment has only one page .
       if anyone has solved this type of issue.  Please provide the inputs.
    Thanks,
    USR

  • When I send open office documents to a PC user (even saved and sent in the word format), the document reaches with serious format changes and is rendered unusable to the PC user. How to overcome the problem??

    When I send open office documents to a PC user (even saved and sent in the word format), the document reaches with serious format changes and is rendered unusable to the PC user. How to overcome the problem??

    I don't use OpenOffice (I have it on my internal just to play around with, but seldom even open it). I do use MS Word and have few problems sharing files - it's usually a font issue so I tend to use MS fonts for documents that I know will need to be shared.
    Unless you need to make collaborative changed to the document, you could always save it as a pdf file. With Acrobat Pro you can even save a pdf file to a Word document with very little change in formatting.
    If I were you - and you have a need for .doc or .docx files to travel and play nicely - I'd just invest in MS Office. If you don't have to send a Word file, try pdf.
    Clinton

  • I cannot send a copy of a document that my partners can open.  I have saved it to iCloud and sent a link, but they can't open it.

    I have a new Mac and I cannot send an email copy of a spreadsheet to my partners that they can open.  Have stored it in the cloud and sent a link, but they are still unable to open.  Help

    Are you using Numbers? Are they, or are they using Microsoft Excel? (in which case you would have to export it as Excel). Are they perhaps using a different version of Numbers? (You can also export to Numbers '09 format).
    Matt

  • Can I use ExtendScript to store info about an Illustrator document externally and recover it later?

    What I want to do is this:
    1. Iterate through all the layers in a document (recursively) and discover each layer's NAME, VISIBLE, and LOCKED properties.
    2. Create an object that contains those properties.
    3. Push the object onto a second array.
    4. Store that second array somewhere, preferably in a file (text?) in the same directory as the AI document.
    5. Load that file at a later date as an object array.
    6. Use the object array to iterate through the illustrator document to conform the current state of that document to the stored states in the array.
    Ideally I would like to be able to store a number of separate states in the same document and refer to them somehow.
    As you may have guessed by now, this is my attempt to make a LayerComps feature for Illustrator that I could use to turn visibilities on and off and then export the result, moving on from one state to the next until all the states I am interested in would be exported. I would settle for being able to do it one at a time.
    I can already do steps 1-3 (shown in blue).
    var doc = app.activeDocument;
    var docName = doc.name;
    var layerStates = [];
    var layerCount = doc.layers.length;
    var count = 0;
    function addLayers(layerArray) {
            for (var i=0; i<layerArray.length; i++) {
                // create an object representing a layer state
                var o = {};
                o.name = layerArray[i].name;
                o.visible = layerArray[i].visible;
                o.locked = layerArray[i].locked;
                layerStates[count] = o;
                count++;
                // if this layer has layers of its own, iterate through those
                if (layerArray[i].layers.length > 0) {
                        addLayers(layerArray[i].layers);
    addLayers(doc.layers);
    // show that we did something, incomplete though it is
    var s = "";
    for (var i=0; i < layerStates.length; i++) {
            s += layerStates[i].name + ": ";
            s += (layerStates[i].visible ) ? "visible" : "invisible";
            s += ", ";
            s += (layerStates[i].locked ) ? "locked" : "unlocked";
            s += "\n";
    alert(s);
    I don't know if it is possible to export that data as XML or even a text string and save it as a file on the file system for later parsing. Anyone have any thoughts about this? Is it possible?
    Currently I am using a restrictive version of a LayerComps script I created, which iterates through a top layer's sublayers, turning each on and exporting as PDF, then turning it off and moving to the next. This is more convenient than doing it by hand, but it really forces me to compartmentalize all "views" of a document in a way that does not lend it self to efficiency and forces redundant copying of pathItems between layers.
    Thoughts?

    Also good, and thanks again for your help. I wasn't sure if ExtendScript implemented the eval() method, necessary to re-objectify a JSON string, because I can't find it in the documentation, but I do see it used in some examples elsewhere. I've successfully written XML files at this point, and when I get a few minutes I'll work on the reading/modifying/exporting part. In the long run, XML files are easier to read, manipulate and maintain, so I'll probably go that route.
    var doc = app.activeDocument;
    var docName = doc.name;
    var xml = new XML("<root></root>");
    var layerStates = [];
    var layerCount = doc.layers.length;
    var count = 0;
    function addLayers(layerArray, xmlObj) {
        for (var i=0; i<layerArray.length; i++) {
            // create an object representing a layer state
            var lay = layerArray[i];
            var x = new XML("<layer/>");
            x.@name = lay.name;
            x.@visible = lay.visible;
            x.@locked = lay.locked;
            xmlObj.appendChild(x);
            layerStates[count] = x.toXMLString();
            count++;
            // if this layer has layers of its own, iterate through those
            if (lay.layers.length > 0) {
                addLayers(lay.layers, x);
    addLayers(doc.layers, xml);
    var xmlFile = new File();
    xmlFile.open('w');
    xmlFile.write(xml);
    xmlFile.copy ('C:/Program Files (x86)/Adobe/Adobe Illustrator CS4/Presets/en_US/Scripts/data.xml');
    xmlFile.close();
    All in all, the documentation for this stuff leaves a little something to be desired. My original question had more to do with how file read and write text streams was handled. The answer was actually much simpler than I anticipated. All this stuff is, once you get a handle on it, but the docs are so stingy on particulars — does it really help us to know about the XML class merely that it "wraps XML into an object" or that XML.attribute(name) "returns a list containing all attribute elements matching the given name"? I finally worked it out for myself that the XML object may be manipulated using dot syntax (x.name, x.@name), but that was certainly not mentioned anywhere.
    Ah, well. The journey is the reward, right?

  • Non PO invoices sent for Approval - getting error message - Tax Jurisdictio

    Hi Experts,
    Our clients have just upgraded from SAP 4.6C to ECC 6.0 and when the Non -PO invoices are sent for approval the user is getting the below error message.
    'Specify a tax jurisdiction key' - Message no. F5566
    Could any one suggest what the reson could be.
    Answers would be suitably rewarded.
    Thanks in advance,
    Manish Singhi
    E- [email protected]

    Hi,
    Can anyone suggest on this.
    Thanks,
    Manish

  • How do document permissions differ from its document library and a content roll-up webpart?

    I have an excel spreadsheet (a group schedule), in a document folder, on a page that only IT management can see/access/edit, in a site that all IT group members have access to.
         for example: http://IT Group site/IT Management Page/Schedule/2015.xlsx
    On the group's homepage, I have a content roll-up web part that displays all document library contents in the group site.
    IT management consists of 3 people. They can all edit the spreadsheet from the original location, but when they access the document from the content roll-up web part on the group's homepage, they cannot save any changes.
         Accessing the file from here: http://IT Group site - content roll-up web part link "2015.xlsx" points to "IT Group site/IT Management Page/Schedule/2015.xlsx"
    The error received says "'http://IT Group site/IT Management Page/Schedule/2015.xlsx' is read-only. To save a copy, click OK, then give the workbook a new name in the Save As dialog box."
    Where would the permission issue be?
    As the SharePoint site owner, I can access the file without any problems saving from either location. Also, I created an IT Management group that has full control over the IT Group site/IT Management Page, and full control over the IT Group site.
    Thanks for any info you can share.
    Stephanie

    Thanks Cameron -
    I have no special settings on the document library where the schedule is saved. No content approval necessary or different permissions. The library is set to open documents in client application, and check-in, check out is not activated.
    I have logged in to one of their computers. They can access the spreadsheet directly from the document library and make changes freely, and save that version directly to the server, but not from any web parts. Just to test, I created a summary link web part
    on the same page that lists the document library, created a link to the file, and the file opens, but they cannot save any changes without renaming the file. The only place they can truly edit the spreadsheet without renaming is from the document library
    directly.

  • How to convert an excel sheet as pdf  and sent mail?

    Hi,
    I have to open an excel file from report and display a value in a cell, based on that value in excel, macros will automatically trigger and the remaining data will fill in excel sheet.
    This sheet i need to convert as pdf and sent as attachment to mail.
    Regards,
    Shree

    Hi,
    I know how to do with word documents using OLE.  But i dont know how to work with Excel sheets.
    I have worked on word documents like displaying data in word document from SAP and saving it into local system.
    But here my requirement is i need to pass pernr to a cell in an Excel sheet, based on pernr in excel some macros will trigger and fill the details. After that, the filled sheet i need to convert as pdf and sent as mail.
    Regards,
    Shree.

  • How do I make comments on a pdf document that was sent to me?

    I have windows XP and Reader 7.0.   Is there a way to enable "edit" so that I can make "comments" on a pdf. document that was sent to me?  withought spending $$$ for pro?

    Thanks Sabian.  It took me a while to figure out that "close Acrobat Reader 7.0" actually meant "delete it".   After loading 10.1.2 I followed the instructions to send my pdf file and Internet Explorer decided to "quit" right in the middle of the process. ??  I'll try to use Chrome to see if that helps.

Maybe you are looking for