Documents Needed for cFolder integration with SRM50

Hello SRM Experts,
I am in need of some info about the cFolder integration with the SRM system. Can anybody help me by sending some documents regarding the same. my email id is [email protected]
Our system is SRM50 SP11.
Thanks & Best Regards
Raj

Hi,
Do you have cFolders on the same server as SRM ?
Foll are the settings reqd:
--.define a LS for cFolders( you have to duplicate SRM LS if it is on the same server)
-->define an RFC destination for this system (even if same as SRM)
-->define a backend system of type cFolders in SRM SPRO
-->activate SICF cFolders service (with external alias)
Normally the collaboration area should be displayed in document tab.
See these related links;
http://help.sap.com/saphelp_srm50/helpdata/en/c1/c3fe3930a34b2ae10000000a114084/frameset.htm
http://help.sap.com/saphelp_ppm400/helpdata/en/e7/1fc30727cd4ddeb7f6351416ebf591/frameset.htm
BR,
Disha.
Pls reward points for useful answers.

Similar Messages

Best practices for apps integration with third party systems ?

Hi all
I would like to know if there is any document from oracle or from your own regarding best practices for apps integration with third party systems.
For example, in particular, let's say we need customization in a given module(ex:payables) need to provide data to a third party system, consider following:
outbound interface:
1)should third party system should be given with direct access to oracle database to access a particular payments data information table/view to look for data ?
2) should oracle create a file to third party system, so that it can read and do what it need to do?
inbound:
1) should third party should directly login and insert data into tables which holds response data?
2) again, should third party create file and oralce apps will pick up for further processing?
again, there could be lot of company specific scenarios like it has to be real time or not... etc...
How does companies make sure third party systems are not directly dipping into other systems (oracle apps/others), so that it will follow certain integration best practices.
how does enterprise architectute will play a role in this? can we apply SOA standards? should use request/reply using Tibco etc?
Many oracle apps implementations customizations are more or less directly interacting with third party systems by including code to login into respective third party systems and vice versa.
Let me your know if you have done differently and that would help oracle apps community.
thanks
rrb.

you want to send idoc to third party system (NONSAP).
what kind of system is it? can it handle http requests
or
can it handle webservice?
which version of R/3 you are using?
what is the mechanism the receiving system has, to receive data?
Regards
Raja

What Kind of microcontroller is needed for alarm system with PIR sensors

Hi ! I'm student at Technical University Varna ,
Bulgaria . I'm interessted to create my own alarm system with Labview,
but I'm not sure what kind of controller i need and what kind of PIR
sensors. Thank You

This is duplicate post:
What Kind of microcontroller is needed for alarm system with PIR sensors

Plz send step by step process for Outlook integration with SAP

Hi Basis experts
Plz send step by step process for Outlookexpress integration with SAP.
plz send if anybody have at the earliest.
advance Thanks& regards to all
Supriya

Dear Supriya,
If it is in SAP then please go through the below mentioed site
http://www.duet.com/
please tell me where in you want to integrate?
Outlook Configuration with SAP-EP is a PPT file.
please mail me your id i will send it accross.

Document for account integration with cProjects needed

hi all
can I get accounting integration document?
<b>mail id [email protected]</b>
we have cProject 4 and R/3 4.7 which we will be upgrading.
i want accounting tab in cProject.
so need documentation @ it
waiting with points!!
thanx a ton

I have sent it to your mail id.
p.s. reward points if you find it useful

SAP connector for CAD Integration with Unigraphics (NX)

Hi Experts,
Could you please guide me on where can I download CAD Integration connector for Unigraphics (NX).
Thanks in advance.
Kind regards,
Neil

Thank you very much for the useful link Martin. Anyway, there are some things that I cannot find for NX Unigraphics integration:
In the wiki you can find
You can download the CAD-Integration-Software from http://service.sap.com/swdc and then goto
Installations and Upgrades > Supplementary Components for Cross Industry Solutions > Life-Cycle Data Management > SAP PLM Integrations > select the desired integration
But that path does not exist in SAP download software page.
Also, in the availability matrix I can find integration with several systems (catia, solid edge, autocad...) but not unigraphics.
Could you please provide some more information on the topic?
Thanks a lot.
Neil

Need help for XI integration with MQ Series

Hi,
We are integrating XI with MQ Series for connceting Mainfrmaes.
Third party adapters are available (iWAY,Software AG) without using these adapters, Are there any ways available?
I need some ref documents.
We are using JMS Adapter in XI for connecting MQ Series.
Khaja

Khaja ,
XI as a product is shipped with the out-of-box adapter for JMS with which you can easily connect to WebSpehere MQSeries / SonicMQ. It gives you almost all the required facilties of setting JMS headers etc also.
1. You would need to install MQSeries driver library onto XI server. Refer the How-To Guide on service marketplace for this.
2. If your MQ is JMS enabled then you can use the XI JMS MQ interface(can select this option in adapter conf.) else go for NON-JMS.
Navigate to the appropriate sections of help.sap.com and you will find all the relevant information
http://help.sap.com/saphelp_nw04/helpdata/en/14/80243b4a66ae0ce10000000a11402f/frameset.htm
--Amol

Document\Approach\Guidance for ATG Integration with Webcenter Site

we have a requirement where pages/templates/content will be created in Webcenter Sites and will be consumed in ATG. I am looking for some Document\Approach\Guidance for Webcenter Site and ATG Integration

I am looking for some Document\Approach\Guidance for Webcenter Site and ATG IntegrationBelow may help you:
http://www.extended-content.com/wp-content/uploads/2012/07/WhitePaper-PublishingContentToATGFromOracleWebCenter-July2012.pdf
http://www.extended-content.com/mediastore-now-integrates-with-webcenter-sites/
http://technology.amis.nl/2011/08/13/fatwire-integrated-into-webcenter-as-webcenter-sites-for-web-experience-management/
Hope this helps.
-RMishra

CFolder integration with SRM

SRM Sever 550 SP13
R3 4.7
CPRXRPM 4.0 SP11 (separate Server, not installed as add-on to SRM server)
Classic
When i create a colloboration folder from bid invitation by clicking create, the cfolder is created correctly. I can log on to cfolders directly and see that it created cFolder for bid invitation correctly. However, after clicking create button, and create button goes away and cFolder link is there, when i click on it, i recieve the following error message:
The following error text was processed in the system:
BSP Exception: the Application Name cfx_rfc_ui in URL /sap/bc/bsp/sap/cfx_rfc_ui/area_de.htm?p_col_id=DEB8F181971056F1ABF2001C23BE9EDD&p_area_id=DEB8F181971057F1ABF2001C23BE9EDD&p_role= is invalid.
My user ID, the creator of the bid invitation has all standard CFX roles assigned to it in the PLM server. The RFCUSER in the RFC destination has all the CFX roles assigned to it (in PLM server) and is integrated in to the SRM org.
Why role is invalid?
Couple of other questions, the complete URL in the error above has the SRM host name, so appears to me based on the URL that SRM is validating role, and the ICF service being called (cfx_rfc_ui) is also at the SRM level. There arent any CFX roles existing in SRM and /sap/bc/bsp/sap/cfx_rfc_ui doesnt exist in the SRM ICF framework. This may be nothing, i would of just expected when clicking the colloboration, it would take me to the PLM server.
It seems I have missed a piece of configuration or something? Do i need to install the CPRXRPM add-on to SRM to get this to work? Any insight is appreciated, I am at a total loss.
Again, the colloboration folder is being created in the background with no issues. RFC connections work. Once cfolder is created i am uable to accesss as buyer/rfx creator from the bid invitation. No issue if log directly in cFolders.
Please help SRM experts!
JF

Yes, i had to submit an OSS message that got kicked around a bit and ended up with development team at SAP. I spoke with the developer on the phone and if I remember correctly, he indicated one of the support packs activated the badi BBP_CHANGE_URL, can not be sure if this is the root cause as it was phone call and I have no documentation of root cause.
the fix was to de-activate the badi BBP_CHANGE_URL.
We did that, works fine, and did not affect any other business scnearios.
JF

CFolder Integration with SNC

Hi Experts,
We are integrating cFolder with SAP SNC (Supply Network Collaboration) application. Both SNC and cFolder application are installed on the same server. We have activated cFolder within SNC application. As per SAP help, we have not added any RFC destination for cFodler as it is on the same server as SNC.
Now when I try to open cFolder link from SNC application, it throws an exception
"Error in CFX Call: An exception occurred that was not caught."
I checked ST22 for the error and found that the application is not able to find cFolder URL. It is failing at below code:
get relative ERL
e_url = cl_cfx_fol_ui =>get_url_for_fol(
icol_id = l_col_id_str
i_area_id = l_area_id_str
i_topic_id = i_topic_id_str
i_role = ' ' ).
I can see that relative collaboration folders are created in cFolder. cFolder application when opened directly from SE80 is opening properly. So it is evident that SNC is able to communicate with cFolder and also able to create collaboration folder. However, when the cFolder window is opening, it fails.
Request you to please help on how to solve this issue.
Regards

Hi,
Configuration Guides are available in SAP Solution Manager. Downloaded offline version is also available in SAP Service Marketplace. Please check Strategic Sourcing scenario.
http://service.sap.com/srm-inst
Regards,
Masa

Documents needed for Report

Hi Experts,
To build a report what are the documents that you are needed or prepared from Functional spec to UAT (User Acceptance Test) like busines Blue print..we had 4 only .Can u share your experience with me..
Thanks & Regards,
Swathi.d

Surely Swathi.
High level Design Document will briefly specify the steps to be followed to followed to achieve the business requirements without getting much into the technical specification.
For example suppose the report is going to be developed on a multiprovider which is built on two cubes, then the HLD will simply give you the flow saying that Build a multiprovider on two cubes, then build report on that multiprovider and give the data flow. Then it will also briefly explain the structure of the report - giving idea whether it will have free chars, filters etc.
Detailed design Document will be a very comprehensive doc. It will give all the minute details of the technical changes which are made. It will follow the Technical Requirements Doc basically.
For the same example above - The DD will give the technical names of all backend structures, give the details of all dimensions present in the Multiprovider and the Chars present in them. Also the itechnical names of all Nav. Attributes present.
Then about the report, every single detail like the technical names and description of all objects present in free chars, rows etc., names of the variables and on which char it is built, RKF and CKF if they are present, basically every technical info if present.
Hope this helps.
thanks,
rahul

Security settings for CRM Integration with SharePoint

I have successfully integrated CRM 2015 and SharePoint 2013, both on-premise. I can see the SharePoint iframe on my CRM.
Next, is to set up the security. Only users with access to CRM record can access the respective SharePoint folders.
After I set up the security in SharePoint, i.e, by only giving permission to the specific folder and not the root site's Visitors group, the iframe on CRM side displays an error. It seems that the iframe is trying to access the root URL first, to which the
users don't have access, hence the error.
Am I missing something or is it not possible? Little explanation is given on MSDN about the security settings.
Another question, is there any plan for Microsoft to support server based integration for on-premise version?

crm does not give the rights through to sharepoint. u have the option to open sharepoint external with list component where you must take away the sharepoint rights and for us never a usefull option. We created custom application internal and did not published
sharepoint, we programmed so that documents are visible in iframe via a IIS website and looks to the logged-in user´s and only the documents are visible which belongs to his security role. its a lot of work but we found that it is also faster then the list
component.
gruss Daniel Ovadia MBSS - Microsoft Dynamics CRM MCNPS

Taxonomy - how many training documents needed for automatic classification?

Greetings,
I have an example based taxonomy.
I have trained the taxonomy manually with about two documents and expected it to classify automatically after that which it has not done.
According to the URL below
http://www.scribd.com/doc/7234683/Retrieval-and-Classification-TREX-Features-and-Functions
it is mentioned that "You can also classify documents automatically. A prerequisite for this is that there are existing document classes with sufficiently correctly classified documents that meet the classification criteria"
Please advise if training the taxonomy with only two documents which I did was too little - exactly how many documents are needed? (the above URL does not give an indication of a number)
Regards,
Keith

Still trying to solve the problem, adding and tailoring documents as best as I can.

Shipment document creation for normal purchases(With out delivery)

Dear Friednds,
I Have one scanario in my project, which is belongs to transportation module:
The client will raise the PO to vendor. The vendor will delivery the goods to my client.
But client will do the MIGO. thst is goods receipt.
Thats all, no inbound delivery. Now i want to capture that shipment costs in SAP.
How to do that.
I have few more scenarios like this:
1. Goods movements from transportation location to plants; How to captire the ship.cots with out shipment document.
2. Goods movements from one Storage lo9cation to another storage location.
At present,the client just raising the service PO to Forwarding agent. Now we need to capture those shipment and ship.cost docuemnts in SAP.
Please any body let it solve.
With regards
Lakki

Hi Lakki,
These are the User Exits available in the shipment cost calculation please try with these,
V54B0001 Shipment costing: Configure pricing
V54B0003 Shipment Costs Calculation: Determine Rate Type and Cur
V54B0004 Shipment Cost Calculation: Determine Status
V54C0001 Shipment costing: Description(s) shipement cost item(s)
V54C0002 Shipment costing: Create shipment cost sub-items
V54C0003 Shipment Costs Processing: Determine Invoicing Party
V54C0004 Shipment Costs Processing: Determine Loc. for Tax Invoi
V54D0001 Shipment Costing: Determining the Tax Countries
V54KSFRC Determining the factors for apportionment of shipment c
V54P0001 Extended Function Codes for Shipment Cost Information
V54U0001 Shipment cost processing: Check whether changes made
V54U0002 Check shipment costs for completion
V54U0003 Specification of shipment cost number
V54U0004 Formatting for update of new objects (shipment costs)
V54U0005 Updating new objects in shipment cost processing
V54U0006 Shipment Purchase Order - Header Data Supply
V54U0007 Shipment Purchase Order - Item Data Supply
I hope it will help you
Regards,
Murali.

How to List view web part to display document library for only users with access permission

Hi
I am trying to accomplish this requirement but I don't know if that is possible or how to get there. Any suggestion or advice are helpful.
On a site collection, I have several document libraries, with each library have unique permission to a few user or SharePoint group.
I want to create a web part page and make that the site home page. On this web part page, I want to create a Content Search Web Part to list the content of the document library that the logged on users have permission to see.
Is this possible with CSWP or is there anything easier or if it is not possible at all, please advise.
Thanks
Swanl

Hi ,
Based on your description, my understanding is that you want to create a Content Search Web Part to list the documents that the logged on users have access permission.
It is feasible with CSWP, you can follow the below step:
Edit Content Search Web Part->Change query-> Select a query: Items matching a content type (System); Restrict by app: Current site collection; Restrict by content type: Document.
Best Regards,
Lisa Chen
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet
Subscriber Support, contact [email protected]

Documents Needed for cFolder integration with SRM50

Similar Messages

Maybe you are looking for